CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+ and ) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the product.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.

PRECAUTIONS

Temperature
Be sure the temperature inside the vehicle is between +60C (+140F) and 10C (+14F) before turning your unit on.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Press BAND/TEL. repeatedly until the desired band is displayed. Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory.
The display shows the band, preset number and frequency of the station selected.
Press TUNE/A.ME to select the tuning mode.
SEEK DX (Distance mode) SEEK LO (Local mode) MANUAL (Manual mode) SEEK DX
The initial mode is DX SEEK (Distance mode).
Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning).
Station Title Search Function
If the title of a radio station is entered, you can search for that radio station by its title while listening to the currently received radio station.

CD / MP3 / WMA

SOURCE/ POWER -/J TITLE 8 SEARCH
Press SEARCH Search mode.
in Radio mode to switch to Title
The first title input blinks in the display.
Select the desired title by turning the Rotary encoder within 10 seconds. Press the Rotary encoder to receive the frequency of the selected title.
Search mode in Title Search mode is canceled by pressing and holding SEARCH for at least 2 seconds. If a station has no title, "NO TITLE" is displayed for 2 seconds.

g f Rotary 9 encoder

Playback Frequency Search Function
You can search for a radio station by its frequency.
Press and hold SEARCH for at least 2 seconds in Radio mode to activate Frequency Search mode. Turn the Rotary encoder within 10 seconds to select the desired frequency. Press the Rotary encoder to receive the selected frequency.
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Search mode in Frequency Search mode is canceled by pressing and holding SEARCH for at least 2 seconds.
The movable display will close and playback will begin. When a disc is already inserted, press SOURCE/POWER to switch to the CD mode. The mode will change every time the button is pressed.
TUNER CD CD CHANGER* TUNER
* Only when the CD changer is connected
While playing back MP3/WMA, press 8 or 9 to select the desired folder.
Pressing and holding 8 or 9 will change folders continuously.
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file): Press g. Fast backward : Press and hold g. Advancing to the beginning of the next track (file) : Press f. Fast forward : Press and hold f.

To pause playback, press -/J.
Pressing -/J again will resume playback.
To eject the disc, press c.
Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. If the CD does not eject, press and hold c for at least 2 seconds with the movable display open.

Continued

The CD-player can play discs containing audio data, MP3 data and WMA data. A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit. "MP3" is displayed during MP3 playback. "WMA" is displayed during WMA playback. The track display for MP3/WMA data playback is the file numbers recorded on the disc. If the HDA-5460 model is connected to the unit, some operations (for example changing the source, selecting the file by holding buttons up or down, etc.), can be carried out on this unit.

Playing back a Playlist

You can play playlists you have prepared in advance on the computer. Both MP3 and WMA playlists can be played. Playlists that can be played back by this device have the file extension "m3u"/"asx."
Press 8 or 9 to select a playlist.
By pressing and holding 8 or 9, the playlists move up or down continuously. If there is a playlist and folder on the disc, the playlist starts to play back prior to the folder. Up to 5 playlist can be played back. Playlists from the 6th onwards cannot be played back. Refer to the software instruction manual on how to create a playlist.
MP3/WMA Play Display CDA-9831
The folder number, file number, sampling rate, and bit rate will be displayed as described below.

File number display

Playlist Display

44.1kHz

While playing back a playlist, the folder and file numbers that are stored in the playlist are displayed.

CDA-9831

Sampling rate Folder number display display

P-LIST

Adjusting and Storing the Time Correction
Before performing the following procedures, refer to "About Time Correction" (page 16).

Setting the MX Mode

MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise.
Press and hold MENU for at least 2 seconds. Press MENU to select T.CORR (T-CORR for CDA-9830). Press g or f to make time corrections.
Each press changes the mode as follows:
Press MX to select MX ON. Press SOURCE/POWER to select the source to which you want to apply MX (Media Xpander). Press and hold MX for at least 2 seconds to activate the level setting mode. Turn the Rotary encoder to select your preferred level or OFF.
Press BAND/TEL. to select a speaker to be adjusted.
CDA-9831 Front L Front R Rear L Rear R Front L

FLFRRLRRFL

FM (MX level 1 to 3): The medium to high frequencies become clearer, and produces well balanced sound at all frequencies. CD/WAV (MX level 1 to 3): CD mode processes a large amount of data during playback. MX takes advantage of this large data quantity to reproduce a more clear, clean output. MP3/WMA/XM (MX level 1 to 3): This corrects information that was lost at the time of compression. This reproduces a well-balanced sound close to the original. DVD (Video CD) (MOVIE MX level 1 to 2): The dialog portion of a video is reproduced more clearly. (MUSIC MX level 1): A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately. AUX (MX level 1): Choose the MX mode (MP3, MUSIC, or MOVIE) that corresponds to the media connected. If two external devices are connected, a different MX mode for each media can be selected.
Turn the Rotary encoder to adjust the desired time correction value.
Repeat step 4 and 5 to set another speaker. Press the Rotary encoder to confirm the adjusted contents.
If no operation is performed in 15 seconds, the unit returns to normal mode.
Press Rotary encoder to return to normal mode.
Recalling the Stored Time Correction Settings
Press the preset button (1 or 2) to which your desired time correction is assigned. Press MENU to select RETURN.
To cancel MX mode for all music sources, press MX to turn MX off. MX mode is automatically canceled if no buttons are pressed within 15 seconds. Each music source, such as FM radio, CD, and MP3 can have its own MX setting. On disks with both MP3/WMA and CD-DA, when the source changes from MP3/WMA to CD-DA or CD-DA to MP3/WMA, MX-mode switching may delay playback slightly. Setting to MX OFF sets MX mode of each music source to OFF. This function is inoperable when DEFEAT is set to ON. There is no MX mode for AM radio. If an audio processor with the MX function (PXA-H700, etc.) is connected, its own MX processing is applied to the music source. Since the processor MX settings may not match the head unit, the audio processor needs to be adjusted. For details, refer to the Owners Manual of the audio processor.

For details, see Displaying the Title/Text (page 19).
Press and hold TITLE for at least 2 seconds. The first character will blink. Turn the Rotary encoder to select the desired letter/numeral/symbol available for naming. Press Rotary encoder to store the first character.
The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.

Blackout Mode On and Off

When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality.
Press and hold DISP/B.OUT for at least 2 seconds to activate the blackout mode.
The display will turn off. If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold DISP/B.OUT for at least 2 seconds.
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th character automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters, the 4th character space will be blinking. Go to step 6 to complete the title.

to record the title.

If you cancel while entering a title, selected characters are not written. You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show FULL DATA. At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted. The CD Changer title length or memory capacity varies depending upon the model being used. When you want to erase a title, enter the ( for CDA9830) symbol into all spaces. The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds.
Setting an Amplifier Link (CDA-9831 only)
With an external Amplifier Link compatible amplifier MRD-M501 or MRD-M301 is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 external amplifiers can be adjusted.
To easily recall adjusted and stored contents
1) Press MENU to select A-Link. 2) Press g or f to select AMP 1 to 8. 3) Turn the Rotary encoder to select Preset 1 or Preset 2. 4) Press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. For details of each of the settings, refer to the Owner's Manual of the external amplifier. If amplifier settings are made on the CDA-9831 model, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the CDA-9831 model. "NO Link" is displayed if the amplifier is removed or its power cannot be turned on, etc.

DIMMER AUTO (Initial setting) / DIMMER MANUAL
CLOCK* NORMAL/HI-FI/STABLE SUBW CD-DA/ CDDA/MP3 BEEP SCR MUTE INT AUX (AUX NAME)*2 PWR AREA DEMO CLOCK*1
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON.This mode is useful if you feel the unit's backlighting is too bright at night.

Scroll Setting

TEXT SCROLL AUTO / TEXT SCROLL MANUAL (Initial setting)

*1 *2 *3 *4

Refer to the Setting Time section (page 6). Displayed only when AUX is ON. Refer to the Radio section (page 8) Displayed only when an external amplifier is connected.
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files, folder names, and tags.
SCROLL AUTO : The CD text information, the text information of folder and file names, and the tags are scrolled automatically. SCROLL MANUAL : The display is scrolled when a disc is loaded or when a track is changed, etc.
Turn the Rotary encoder to change the setting.
(e.g. Select BEEP ON or BEEP OFF.)
The unit scrolls CD text names, folder names, file names or tag display. The disc titles input manually (page 20) cannot be scrolled.
For the XM Radio settings, refer to XM Radio (Optional) (page 26), and for the MobileHubLink settings, refer to MobileHubLink Operation (Optional) (page 28). If no operation is performed within 15 seconds, the display returns to normal mode.
Adjusting Display Contrast (CDA-9831 only)

LCD CONTRAST

Connecting to an External Amplifier
POWER-IC ON (Initial setting) / POWER-IC OFF
You can adjust the display contrast for better visibility. You can adjust in a range of - 5 and + 5. The initial setting at the factory is 0.
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.
POWER-IC OFF : Use this mode when the front and rear preamplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head units internal amplifier has no output to drive speakers. Front left Front right Rear left Rear right

Demonstration

DEMO ON / DEMO OFF (Initial setting)

This unit has a demonstration feature for the display and sound, and the CDA-9830 has a demonstration feature only for the sound. To quit Demo mode, set to DEMO OFF.

Amplifier

MP3/WMA

Playing MP3/WMA Data

PLAY MODE CD-DA (Initial setting) / PLAY MODE CD-DA & MP3
This product can playback CDs containing both CD and MP3/WMA data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD or the MP3/WMA data, playback starts from the CD data portion of the disc.
CD-DA : Only CD data can be played back. CD-DA & MP3 : Both CD data and MP3/WMA file tracks can be played back.
POWER-IC ON : The speakers are driven by the built-in amplifier.

Speakers

SPEAKER RIGHT FRONT

Front right

Perform this setting before inserting a disc. If a disc has already been inserted, perform the setting after you remove the disc. (If you use an MP3 changer, you have to change discs.)

SPEAKER RIGHT REAR

Rear right

External Device

Turning Mute Mode On/Off
INT MUTE ON (Initial setting) / INT MUTE OFF

SPEAKER LEFT REAR

Rear left
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

SPEAKER LEFT FRONT

Front left
Setting the AUX Mode (V-Link)
AUX IN ON / AUX IN OFF (Initial setting)
No sound is produced by the system when the power output is set to OFF.
You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA410C) to this component. You can change the AUX name display when AUX ON is set. Select the AUX name by pressing g or f. Then turn the Rotary encoder. If the KCA-410C is connected, it is possible to select two AUX names. Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND/TEL. to select your desired device.

Setting the Temperature Display for the External Amplifier (CDA-9831 only)
A-LINK TEMP F(Initial setting) / C
When a separately sold Amplifier Link compatible amplifier is connected, you can set how to display its temperature. You can switch the setting between Fahrenheit and Celsius. F : The temperature is displayed in Fahrenheit. C : The temperature is displayed in Celsius.
Setting the Tone Defeat for External Devices
INT AUDIO ON / INT AUDIO OFF (Initial setting)
When inputting external devices to this unit, turning tone defeat on will bypass EQ and MX, i.e., sound for external devices is output at the default setting.
SOURCE/ BAND/ POWER TEL. TITLE 8 SEARCH
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID number for your XM Radio Receiver in order to subscribe to XM's programming. This number is an 8 character alphanumeric number that is printed on a label directly on the XM Receiver. It can also be displayed on the screen of the CDA-9831/CDA-9830 in the following way.
g MENU f Rotary encoder 9 Preset buttons (1 through 6)
While receiving XM1, XM2 or XM3, press g or f to select channel 0.
The unit alternately displays RADIO ID for 2 seconds, then the ID number for 10 seconds. While displaying "RADIO ID" as shown above, Blackout (page 20) and Demonstration (page 25) become nonfunctional.
Receiving XM Channels with the XM Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment, with up to 100 brand-new digital channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coastto-coast via satellite. For more information, visit XMs website at www.xmradio.com or call 1-800-852-9696. An optional XM Satellite Radio Receiver (TUA-T020XM) and an optional XM antenna may be connected to the CDA-9831/CDA-9830. With an XM Receiver connected to the Ai-NET input of the CDA9831/CDA-9830, the XM Receiver will be controllable from the CDA-9831/CDA-9830. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. The controls on the CDA-9831/CDA-9830 for XM Receiver operation are operative only when an XM Receiver is connected. The XM1, XM2 or XM3 band illuminates when in XM mode.
To cancel the ID number display, set the channel to other than 0.
You cannot use O, S, I, or F for the ID Number. You can check your ID number printed on the label on the package of your XM Satellite Radio Receiver (TUA-T020XM).
Storing XM Channel Presets
Press BAND/TEL. to select the desired band (XM1, XM2 or XM3) you want to store. After tuning in the desired channel, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the channel.

Press MENU to select the SETUP mode. Press g or f to select CH SELECT (CH NO or ALPHABET for CDA-9830). Turn the Rotary encoder to set the tuning method.
CH NO : Set in order of channel no. ALPHABET : Set in alphabetic order.

Category Search mode:

Turn the Rotary encoder to select the desired Category within 10 seconds. Press Rotary encoder to receive the selected Category.
Search mode is canceled by pressing and holding SEARCH for at least 2 seconds in Category Search mode. While in Category Search mode, press SEARCH to switch to Channel Search mode.
When the setting is completed, switch the channel DOWN/UP by pressing the g or f.

Quick Search Function

You can search for all Channels.
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or off.
Press and hold SEARCH for at least 2 seconds in XM mode to activate Quick Search mode. Turn the Rotary encoder to select the desired Channel within 10 seconds.
The selected Channel is received.
Press MENU to select the SETUP mode. Select XM ADF (ADF for CDA-9830) by pressing g or f. Select ON/OFF by turning the Rotary encoder.
When setting to ON, Auxiliary Data Field is displayed by pressing TITLE. (Refer to the Changing the Display section on this page.)

Changing the Display

Text information, such as the channel name, artist name/feature, and song/program title, is available with each XM channel. The unit can display this text information as explained below.

In XM mode, press TITLE

Each time you press this button, the display changes as shown below.
Channel Number*1 Channel Name Music Title Artist Name Auxiliary Data Field*2 Clock External Amplifier Information*3 Channel Number*1
*1 The Channel Name display automatically changes after 2 seconds. *2 When ADF is turned OFF, this information is not displayed (see Setting the Auxiliary Data Field Display on this page). *3 CDA-9831 only Refer to the Displaying the External Amplifier Information section (page 21).
MobileHub Link Operation(Optional)
BAND/ SOURCE/ POWER -/J TEL. TITLE 8 SEARCH

SOURCE

Press the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer.
The selected disc number appears in the display and CD playback starts.
After selecting the desired disc, you can operate in the same way as for the CD player of this unit. For details, please see the CD/MP3/WMA section. If the FUNC indicator is illuminated, the disc select buttons become nonfunctional.
Press BAND/TEL. on this unit or the RUE-4187 to activate the CD Changer Selection mode.
The CD Changer Selection mode remains active for 8 seconds.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press F. This changes the D indicator to d. Then press the desired preset button. With F activated, the preset buttons 1 to 6 will represent discs 7 to 12 respectively.
Press BAND/TEL. until the desired CD Changer indicator appears on the display.
Alternatively press BAND/TEL. on the Remote Control until the desired changer indicator appears on the display.
If the selected CD Changer is not connected, the display will show NO CHANGER (NO CHGR for CDA-9830). To operate the selected changer, see CD/MP3/WMA(page 9). For further details about the external input (AUX) when using KCA-410C, see Setting the AUX Mode (V-Link) on page 25.

9 ! " #

9 f UP Button
Radio mode: SEEK (UP) button CD mode: Press this button to advance to the beginning of the next track.

! 9 Button

Radio mode: Pressing this button will select, in descending order, stations programmed into the radio's presets as shown below.

6 5. 1 6

CD Changer mode: DISC Select (DN) button Press this button to select a disc in descending order. MP3/WMA mode: Folder or Playlist Select (DN) button Press this button to select the folder or playlist.

" Mute Button

Press this button to lower the volume by 20 dB instantly. Press this button again to cancel.

# Audio Processor Button

Controls on Remote Control

1 Power Button

Press this button to turn the power on/off.
Each press of the button changes the audio processor mode. For details, refer to "Operating the Audio Processor" as shown below. Press the button to call the external audio processor mode when the external audio processor is connected.*1 *1 For the operation of external audio processor, refer to the Owner's Manual of the external audio processor you purchased.

2 Source Button

Press this button to select the audio source.

3 -/J Button

Press this button to switch between the Play and Pause modes for CD.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

Precautions

Be sure to disconnect the cable from the () battery post before installing your CDA-9831/CDA-9830. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system. When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-9831/CDA-9830 to the fuse box, make sure the fuse for the intended circuit of the CDA-9831/CDA-9830 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. The CDA-9831/CDA-9830 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance. Be sure to connect the speaker () leads to the speaker () terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.
SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE:

Installation

Metal plate
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9831/CDA9830. Connect all other leads of the CDA-9831/CDA9830 according to details described in the CONNECTlONS section.

7 Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position. 8 Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. 9 Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. ! Choke Coil with Fuse Holder (10A) " Power Supply Connector
To prevent noise/interference in the audio system. Locate the unit and route the leads at least 10 cm away from the car harness. Keep the battery power leads as far away from other leads as possible. Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information. Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.

[PRODUCTS COVERED:

This Warranty covers Car Audio/Visual Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
2 You should provide a detailed description of the problem(s) for which service is required. 3 You must supply proof of your purchase of the product. 4 You must package the product securely to avoid damage during shipment.

[LENGTH OF WARRANTY:

This Warranty is in effect for one year from the date of the first consumer purchase.
[HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT.

[IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center.
[HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number for your nearest Authorized Alpine Service Center. U.S.A. CANADA 1-800-ALPINE-1 (1-800-257-4631) 1-800-ALPINE-1 (1-800-257-4631)
[HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges.
Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A. Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada

Panasonic CQDFX883U

$249.95

CQDFX883U CAR RECEIVER

Alpine CDA-9847 CD/MP3/WMA Rec CD/MP3/WMA Alpine CDA-9847 Receiver MP3 CD Receivers $299.99
Bazooka Bazooka BTSubwoofer Tube Non-powered BT8014 Subwoofers"

$219.99

Alpine CDA-9830

$390.00

CD/MP3/WMA Receiver MP3 CD Receiver

Alpine HDA-5460

$598.35
Alpine HDA-5460 Hard Disk Drive Player
Clarion Sirius SIRCL Satellite Radio Sirius Satellite Radio Tuner SIRCL1 For Aftermarket Stereos

$238.00

Clarion DXZ845MC AM/FM CD/MP3/WMA Clarion DXZ845MC Player/Digital Recorder $461.00

Alpine CVA-1004

$999.99
Receiver / Mobile Multimedia Station

Infinity 1230W

$99.99
Infinity 1230W 12" Subwoofer
Panasonic Panasonic CQ-C5310U CD Receiver w/ MP3 and CQ-C5310U WMA Playback

$285.00

Sony XM-DS1300P5

$319.99

Sony XM-DS1300P5 Mono 500 Watt Amplifier
55W x 4 CD Deck with 2-Step Motorized Detachable Dual XD7500 Faceplate/CD-R/RW Playback - Gray/Silver - XD7500 This deck dazzles the eyes with a. $244.95

Sony RMX4S

$84.99
Sony RMX-4S Wired Rotary Commander

Numark CDN36

$499.95
NUMARK CDN36 DUAL CD W/ SCRATCH

Sony XS-V6950H

$229.99
Sony XS-V6950H 6" x 9" 4-Way Speakers (Pair)
Pyramid 10 BAND GRAPHIC EQUALIZER/ AMPLIFIER 200 WATTS OUTPUT 903G

$89.99

Delphi SA10113 MyFi XM2Go Portable XM Satellite Delphi SA10113 Tuner Universal Add-on $449.99

Alpine CDA-9833

$475.00
Infinity KAPPA 50.5CS 5 1/4" Two-Way Infinity KAPPA 50.5CS Component System $323.99
Type-S SPS171A 6-1/2IN. 2-way Component Speakers Alpine SPS171A System $299.99

Infinity KAPPA 10.5T

$145.99
Infinity KAPPA 10.5T 1" C.M.M.D. Tweeter (Pair)

Sony CDX-F5500

$264.00
Sony CDX-F5500 CD Receiver
Kenwood Usa Kenwood KFC-P505IE 5 1/4" Midrange and 1" Tweeter Package KFC-P505IE

$249.99

Q-LOGIC QLH-6510SE Q-Logic 10" Subwoofer Q Logic QLH-6510SE Enclosure This subwoofer box from Q-Logic is perfect for your 10" sub. It features a. $104.99
Q-Logic QL-C1FSX110 Black 00-up Ford Q Logic QL-C1FSX110-A01 Super Duty Ex-Cab 1x10 box Vehiclespecific Enclosures" $329.99
Polk Audio MM 4-ohm Component Subwoofer Polk AA2084-A 8" Component Subwoofers" $159.99
Metra VT-GMRC-01 GM Class II Data bus Interface Metra GMRC-01 Factory System Adapters $109.99
PIE Pioneer IP-Bus Din to Din 5.58 meter IP-Bus PIE PIO/P-DIN Cable male-to-male Adapters & Cables $59.99

Jbl GTO1020

$218.00

Speaker

Sirius Portable Satellite Radio Tuner with Car Docking XACT XTR1CK Kit - XTR1CK Tap into 120 channels of satellite radio, more than half of which. $262.00

Sony CDX-F7705X

$301.00

Car CD Player

Kenwood Usa Kenwood KRC-335 Cassette Receiver with CD Changer Controls KRC-335

$239.99

Sony CDX-F7700

$315.00

Sony CDX-F7700 CD Receiver
Alpine CDA-9831 CD MP3 WMA Player Detachable, Alpine CDA-9831 fold-down face, 4-volt front, rear and subwoofer preamp outputs, XM Satellite Ready. $429.99

Kenwood Usa KDC-3025

$248.35

CD Receiver

Alpine CDA-9835

$556.00

Alpine CDA-9835 CD/MP3/WMA Receiver
52W x 4 CD Deck with MOSFET Amp/MP3 Aiwa CDC-X504MP Playback/Detachable Faceplate - Silver - CDCX504MP Make the drive a rocking one with a CD deck. $239.99
Clarion ADB340MP CD/MP3/Cassette Receiver All CD Clarion ADB340MP Receivers $436.25

Neo R10

$294.99
Neo Car Audio RCD Auto Changer

Pyle PLCD25

$82.88
DETACHBLE FACE SINGLE CD PLAYER

Kenwood Usa Z727

$389.99

Panasonic CQ-C3100U

$225.00
Panasonic CQ-C3100U CD Receiver
Kenwood Usa Car Docking Kit for Here2Anywhere Portable Sirius Satellite Radio Tuner - KPA-H2CFM Get rocking in KPA-H2CFM
your car with a docking kit designed. $59.99
Alpine MRD-M1001 500W x 1 Car Amplifier Mono Alpine MRD-M1001 Subwoofer Amps $899.99

Gli Pro XW-1088

$39.99
Gli Pro XW-1088 '10" High Quality PA Woofer
Pyle PLCDCS300 Pyle PLCDCS300 Double Din Pyle PLCDCS300 AM/FM-MPX Cassette Player w/ Flip Down Detachable Face $255.00
Rosen Rosen R5600 Oem-Validated, Slot-Load DVD Player With R5600 Tuner
Rockford Fosgate Punch 12" Single-Voice-Coil 4-Ohms Subwoofer with Polypropylene Cone - P112S4 Bust out the P112S4
mean bass with this 12" sub and. $99.99
Kicker 04S15L7 Solo-Baric L7 15" Dual 4-ohm Voice Coil Kicker 04S15L74 Subwoofer $699.99
PIE PIO/P-RCA Adaptor P-Bus MCD To Aux Input PIE PIO/P-RCA FAB Adaptor Auxiliary Input Adapters $49.99

Audiovox SIRHK1

$83.95
AUDIOVOX SIRIUS HOME DOCKING STATION
Kenwood Usa Kenwood KDC-MP825 3D MASK Sirius Ready CD/MP3 Receiver KDC-MP825

$319.00

Rockford Fosgate Punch 900W Mono MOSFET Amplifier with Selectable Bass Boost - P3001 Unleash the P3001
hounds in your subwoofers with a MOSFET amp that shoots. $349.99

Sony SA-WM500

$240.00
150 Watt Active Subwoofer

Delphi SA10109

DELPHI Roady 2 XM Radio Receiver SA10109

Infinity KAPPA 63.5I

$259.99
Infinity KAPPA 63.5I 6 1/2" 3-Way Loudspeaker
Micro Innovations 3PC DELUXE SUBWOOFER SPEAKER SYSTEM MM640D

$26.36

Alpine KCA-130B
Alpine KCA-130B Male Ai-Net to Female M-Bus Adapter
Kenwood Usa Kenwood KDC-X969 CD/MP3/WMA Receiver w/ CD Changer Controls KDC-X969

$585.35

Kenwood Usa Kenwood KDC-MP625 CD/MP3/Sirius Ready Receiver KDC-MP625

$338.35

Q-Logic QL-C1DQC110-01 02-up Black Dodge Q Logic QL-C1DQC110-A01 Quad Cab 1x10 Vehicle-specific Enclosures" $329.99
Alpine Type-X SWX-1242D 12 Dual 4-ohm Component Alpine SWX-1242D Subwoofer 12" Component Subwoofers" $549.99

Sony CDX-CA700X

$248.88
Sony CDX-CA700X XM Ready CD Receiver

Lanzar VBP212

$224.00
12" Dual Bandpass Subwoofer System

Rockford Fosgate T8004

$849.99
Power 4-channel Amplifier
Kenwood Usa Kenwood KCA-R71FM Controller/FM Modulator FM Modulators KCA-R71FM

7" FLIP OUT SCREEN WITH AM/FM/TV TUNER Car Pyle PLTV7R Audio $578.98
Pyle PLTV64 6.4" In-Dash Monitor w/AM/FM Tuner & CD Pyle PLTV64 Changer Controls $493.00
Mobile Authority UTS-1300

$243.00

Audio/Video Tuner Controller with Antennas
Clarion VRX745VD MP3 DVD Miltimedia Player Clarion VRX745VD ProAudio Touch-Panel Control unit, Plays MP3 Files on CD-R/RW Discs, IR Remote Control. $1499.99

Clarion AVCL1T

$19.99
Clarion AVC-L1-T 2000-2001 Lexus RX300 Tan

Starvision SPF-1502

$499.99
Starvision SPF-1502 LCD Monitor w/IR Transmitter
Kenwood Usa Kenwood SK-701RM Mounting Arm for Video Monitors SK-701RM
PANASONIC CY-VHD9500U Panasonic Overhead Panasonic CY-VHD9500U Mobile Video System with Digital Camera This Panasonic mobile video system offers a total. $1035.00

Sony XAV-7W

$779.00

Sony XAV-7W A/V Receiver

7" Wide LCD Monitor AM/FM/DVD Player/Changer Control Lanzar STVD7IN $799.99

Sony XVM-H65

Sony XVM-H65 6.5 Flush Mount LCD Color Monitor

Sanyo CDV-7004

$734.99
Sanyo CDV-7004 Mobile Video Entertainment System
Lanzar SVDVDIN70 7" In-Dash Monitor & DVD Player Lanzar SVDVDIN70 & Graphic Touch Screen $854.99

Pyle PLVW1770R

$1020.00
17" Overhead TFT-LCD 169 Widescreen Monitor

Power Acoustik PT-ID7300

$479.00

7 Wide TFT/LCD Monitor

Pyle PLBINDV7

$759.00

Pyle PLBINDV7 In-Dash Monitor w/ DVD/TV/FM/AM
Power Acoustik POWER ACOUSTIK PWA MOBILE AV ACCESSORY 85 UNIV. CEILING MOUNT PT852CM
POWER ACOUSTIK PT-852CM $387.95

Clarion TTX7501Z

$459.99
Clarion TTX7501Z TV Tuner for CeNet
Power Acoustik PowerAcoustik PT-501MH 5" Headrest Color Monitor PT-501MH
Power Acoustik PowerAcoustik PT-75HB 7.5" STN-LCD Monitor with Headrest Kit PT-75HB

$248.99

FARENHEIT Farenheit MDLCD Overhead Monitor Overhead" MD1000

$799.99

Sanyo ECD-T1580DV DVD Receiver/6.5 Monitor Sanyo ECD-T1580DV DVD with Monitors" $799.99
Delphi MV10021 Neutral 10 Overhead DVD Delphi MV10021-11B1 Overhead" $999.99

Power Acoustik PT-74

$229.39

7.2 Wide Screen Monitor

Clarion Clarion VDH910 VHS Hi-Fi Video Cassette Player with Tuner VDH910

$289.98

Clarion VMA6491
Clarion VMA6491 6.4" Color LCD Monitor

Pyle PLVW1040

$542.66
10.4" Overhead TFT-LCD Monitor

Kenwood Usa LZ-H70W

$555.00
Kenwood LZ-H70W Overhead Console

Legacy LM56

$169.98
Legacy LM56 5.6" Color LCD Monitor w/ Front Controls
Power Acoustik POWER ACOUS 7 TFT LCD HEADREST MONITOR PT700MHR

$186.99

TracVision KVHA5

$2919.99

TracVision KVHA5 Car Satellite TV system
Pyle PLVWR81IR 8" TFT LCD Mobile Roof Mount Pyle PLVWR81IR Monitor w//Wireless Headphones $315.00

Pyle PLTV165

$324.99
Pyle PLTV165 6.5" In-Dash Monitor w/Built-In TV

Pyle PLTVR5

$365.00
PYLE 5 POP UP MONITOR R/C AM FM TV TUNER

Audiovox LCM4000

$258.88
Audiovox 4 Inch LCD Monitor
7.2 LCD SCREEN & BUILT IN SPEAKER Pyle built this Pyle PLWHR7 7.2" LCD monitor to withstand the abusive conditions of the car environment. $288.88
X 768 WXGA HDTV/PC Monitor 23 HDTV / PC Zenith L23W36 Monitor, Built-In NTSC Tuner, 1280 X 768 WXGA Resolution, $1499.00

BLITZ BZTV7R

$588.88
Blitz BZTV7R 7" Wide Screen TFT LCD Monitor
Pyle PLTVCP85 Video Cassette Recorder w/Built-in TV Pyle PLTVCP85 Tuner $250.00

Kenwood Usa KVT-M700

$925.00
Kenwood KVT-M700 In-Dash Television/Receiver
Mobile Authority MOBILE AUTHORITY AUDIO/ VIDEO SWITCHER AV44RF

$244.95

Power Acoustik POWER ACOUSTIK 7 TFT LCD SUN VISOR MONITOR PT729MSV

$314.88

Panasonic CQ-VD7200U DVD MP3 Player 7" Monitor Panasonic CQ-VD7200U DVD MP3 Playback, 7 " TFT Active Matrix, OneTouch Tilt, Anti-Shock Memory, TV. $1185.00

Power Acoustik PT-738MSV

$314.45
PowerAcoustik PT-738MSV 7" Sunvisor Module
Power Acoustik POWER ACOUSTIK 10.4 FLIP-DOWN LCD MONITOR WITH DVD PLAYER PMD104CMX

$829.88

BLITZ BZDVD8
Blitz BZDVD8 In-Dash Digital DVD Player
CRIME STOPPER CRIMESTOPPER 4 CLIP-ON REAR VIEW MIRROR COLOR LCD MONITOR SV9000
CRIMESTOPPER SV-9000, 4 CLIP-ON REAR VIEW MIRROR COLOR LCD MONITOR $544.00

Clarion RCB048

Clarion RCB048 Joystick IR RC

Mobile Authority AVA-12

$56.95
50 Watt Plug-N-Go Game Plate

Pyle PLVCPBG

$279.88
Pyle PLVCPBG Mobile Video Package

Legacy LSC7

$234.98
Legacy LSC7 7" Color LCD Monitor

Starvision VA-14

Starvision VA-14 Video Amplifier

Legacy LSHR5

$189.99

Legacy LSHR5 5" LCD Monitor

Emerson MT-2500

$594.99
Emerson MT-2500 10.4-inch Car Ceiling Monitor
Mobile Authority MOBILE AUTH VIDEO ARM FOR HEADREST AVHR-B1
1 vendor has this product for sale for $142.95
13" Overhead TFT LCD Slim Design Display with IR Pyle PLVW1350IR Receiver $629.99

NESA G16

NESA G16 Heavy Duty 16" Goose Neck
1 vendor has this product for sale for $144.99

Legacy LSCM6

Legacy LSCM6 6" Color LCD Monitor
Rosen ROSEN 15.2 INCH OVERHEAD MONITOR RE1569 WIDERE1569 SCREEN STAND ALONE MONITOR

$1149.99

Starvision TM-585

$279.00

Starvision TM-585 5.8" NTSC Full Color LCD Monitor
NESA NSV-5803 5.8" TFT-LCD Wide Module With NESA NSV-5803 Sunvisor Kit $294.99

VISONIK VM70ID

$729.99
Visonik VM70ID In-Dash 7" Wide Screen LCD
Emerson Emerson TVL-Screen, AM/FM Stereo Tuner, TV TVL9100 Tuner, 160w amp

$654.99

Emerson EMERSON MOBILE MT-1206 6" TFT/LCD Visor Monitor MT1206

$264.99

NESA NSCM-709

$414.99

NESA NSCM-709 7" TFT-LCD Overhead Monitor

Pyle PLVS720

$290.00
Pyle PLVS720 7" Wide TFT/LCD Sun Visor Screen
Starvision TM-SV50TV 5" LCD Monitor w/ TV Tuner Starvision TM-SV50TV (Beige) $289.90
Nesa Vision NSMD-1010 10" Flipdown 169 Widescreen NESA NSMD-1010 Combo $839.99
Power Acoustik PowerAcoustik PT-588MSV 5.8" Wide (169) Sunvisor Monitor PT-588MSV

$279.99

Panasonic Panasonic PKG-AV1 Rear DVD & AV Device Package Rear Seat Video & SD Multi AV Device Package includes PKG-AV1
the CY-VHD9500U and. $1099.99
Power Acoustik POWER ACOUSTIK PWA MOBILE AV ACCESSORY 8.5 COMBO CEILING MT POWER PMD85CM
ACOUSTIK PMD-85CM $667.88

Starvision STAKIT5

$379.99
Starvision TM-720X Monitor Mobile Video Kit

Starvision TM-6F

Starvision TM-6F 6" Roof Mount LCD Monitor

Starvision SP-56H

Starvision SP-56H 5.6" TFT Color Monitor

Starvision SP-6HS

Starvision SP-6HS 6" NTSC Full Color LCD Monitor
Starvision SPF11.3FM 11.3" Color TFT LCD Monitor w/ Starvision SPF-11.3FM IR & FM Transmitter $449.99
Starvision Starvision TM-703IR Flip Down Monitor With IR TM-703IR Transmitter
Starvision Starvision TM-RVM4 Universal Wide Angle Rearview TM-RVM4 Mirror with Built in 4" Monitor

$289.99

Rosen CV8080D

$1154.68

8" All-In-One Mobile DVD/Video System (Neutral)

Rosen CV8081D

8" All-I-One Mobile DVD/Video System (Gray)
PYLE 6.5' LCD CAR DVD PLAYER, MOTORIZED PULL Pyle PLDVD65T OUT MONITOR => Model PLDVD65T 10 $484.99

Clarion TTX001

$299.88
Clarion TTX-001 Stand Alone/Slave TV Tuner