Alpine CDE-9870R Manual
Alpine CDE-9870R Car Audio, size: 1.9 MB
Here you can find all about Alpine CDE-9870R like manual and other informations. For example: review.
Alpine CDE-9870R manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Alpine CDE-9870R please write about it to help other people. [ Report abuse or wrong photo | Share your Alpine CDE-9870R photo ]
User reviews and opinions
|pachequin||10:48am on Tuesday, June 8th, 2010|
|Outstanding value for the iPod user I bought one of these to replace a factory fit unit in an older Mondeo.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Playing MP3 Data (PLAY MODE).17
Connecting to an External Amplifier (POWER IC)..17 Setting the AUX+ Mode..18
Setting RDS Reception Mode and Receiving RDS Stations.. 8 Recalling Preset RDS Stations.. 8 Receiving RDS Regional (Local) Stations. 8 PI SEEK Setting.. 9 Receiving Traffic Information. 9 Receiving Traffic Information While Playing CD or Radio.. 9 Displaying Radio Text.. 9
Playback... 18 Searching for a desired Song. 19 Direct Search Function.. 19 Select Playlist/Artist/Album/Podcast/Genre/ Composer.. 19 Random Play Shuffle (M.I.X.).. 20 Repeat Play... 20 Displaying the Text... 20
Playback.. 10 Repeat Play... 10 M.I.X. (Random Play). 11 Searching from CD Text.. 11 File/Folder Name Search (concerning MP3).. 11 About MP3... 12
In Case of Difficulty.. 21 Specifications.. 23
01GB00CDE-9870R.book Page 2 Wednesday, November 1, 2006 10:47 AM
Installation and Connections
Warning.. 24 Caution... 24 Precautions.. 24 Installation.. 25 Connections.. 26
01GB00CDE-9870R.book Page 3 Wednesday, November 1, 2006 10:47 AM
This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3 formatted audio files. Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard. Use discs with MP3 files written in a format compatible with this unit. For details, see pages 12-13. ROM data other than audio files contained in a disc will not produce sound when played back. Apple, the Apple logo and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com
01GB00CDE-9870R.book Page 6 Wednesday, November 1, 2006 10:47 AM
Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit.
Head unit...1 Power cable..1 Mounting sleeve...1 Carrying case...1 Rubber Cap..1 Hex Bolt...1 Screw (M5 8)...4 Owners Manual... 1 set
Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.
Turning Power On and Off
The initial mode is Distance mode.
Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning).
If the indicator is illuminated, turn off the indicator by pressing FUNC./SETUP, and then you can perform the operation.
to tune in the desired station.
or will change the frequency
Holding down continuously.
Presetting Stations Manually
Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station.
The selected station is stored. The display shows the band, preset number and station frequency memorized.
A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW). If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. If the indicator is illuminated, turn off the indicator by pressing FUNC./SETUP, and then you can perform the operation.
01GB00CDE-9870R.book Page 8 Wednesday, November 1, 2006 10:47 AM
/ /ENT BAND/TA
Recalling Preset RDS Stations
AUDIO/RTN 1 FUNC./SETUP /AF TITLE
Press FUNC./SETUP so that the lights up. Press 1
/AF to activate the RDS mode.
Press FUNC./SETUP to activate the normal mode.
The indicator goes out.
Make sure that the indicator light goes out, then press the preset button in which your desired RDS station is preset.
If the preset stations signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.
Setting RDS Reception Mode and Receiving RDS Stations
The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme.
If the preset station and the stations in the AF list cannot be received:
When the PI SEEK setting is on (refer to PI SEEK Setting on page 9), the unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset number disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.
Press FUNC./SETUP so that the lights up. Press 1 Press station. Press 1
For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1, F2 and F3 bands only. Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out.
/AF to activate the RDS mode. or to tune in the desired RDS
/AF again to deactivate the RDS mode.
Receiving RDS Regional (Local) Stations
Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out. The RDS digital data includes the following: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement EON Enhanced Other Networks
Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. Press or then press Press or to select the REGIONAL mode, and /ENT. to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the related local RDS station.
Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode.
Press AUDIO/RTN to return to the previous mode. If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
01GB00CDE-9870R.book Page 9 Wednesday, November 1, 2006 10:47 AM
PI SEEK Setting
Receiving Traffic Information While Playing CD or Radio
Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. Press press Press or to select the PI SEEK mode, and then / /ENT. or to select ON or OFF.
Press and hold BAND/TA for at least 2 seconds so that the TA indicator lights up. Press or to select a traffic information station if necessary.
When a traffic information broadcast starts, the unit automatically mutes the CD player or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began.
When traffic information stations cannot be received:
Receiving Traffic Information
Press and hold BAND/TA for at least 2 seconds so that the TA indicator lights up. Press or to select your desired traffic information station.
When a traffic information station is tuned in, the TP indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows TRF-INFO for 5 seconds. When the traffic information broadcast is over, the unit will automatically set in the standby mode.
In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The EON indicator lights up while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs.
Press and hold BAND/TA for at least 2 seconds to deactivate the Traffic Information mode.
The TA indicator goes out.
Displaying Radio Text
Text messages from a radio station can be displayed.
If you do not want to listen to the traffic information being received, lightly press BAND/TA to skip that traffic information message. The TA mode will remain in the ON position to receive the next traffic information message. If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. In the TA mode, the SEEK tuning selects only the TP stations.
Press TITLE while receiving FM in the radio mode to select the Radio Text display.
The display will change every time the button is pressed.
If there is PS (Programme Service Name): PS (Programme Service Name)* RADIO TEXT PS (Programme Service Name)
* If TITLE is pressed and held for at least 2 seconds while displaying PS in the radio mode, frequency will be displayed for 5 seconds.
If there is no PS (Programme Service Name): FREQUENCY RADIO TEXT FREQUENCY
The display shows WAITING for a few seconds, then starts scrolling the text message. If there is no receivable text message or the unit cannot receive a text message properly, the display shows NO TEXT.
01GB00CDE-9870R.book Page 10 Wednesday, November 1, 2006 10:47 AM
/ /ESC /ENT SOURCE/
To eject the disc, press
Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. If the CD does not eject, press and hold for at least 2 seconds. The DISC IN indicator lights up when a disc is inserted. The CD-player can play discs containing audio data and MP3 data. The track display for MP3 data playback is the file numbers recorded on the disc. The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
Except for private use, duplicating audio data (including MP3 data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.
What is MP3? MP3, whose official name is MPEG-1 Audio Layer 3, is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realises such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. Method for creating MP3 files Audio data is compressed by using MP3 specified software. For details on creating MP3 files, refer to the users manual for that software. MP3 files that can be played back by this device have the file extension mp3. Files with no extension cannot be played back. Supported playback sampling rates and bit rates MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz 8 - 320 kbps Bit rates: This device may not play back correctly depending on sampling rates. ID3 tags This device supports ID3 tag v1 and v2. If tag data is in an MP3 file, this device can display the title (track title), artist name, and album name ID3 tag data. This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags) and the underscore. For nonsupported characters, NO SUPPORT is displayed. The tag information may not be correctly displayed, depending on the contents. Producing MP3 discs MP3 files are prepared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold up to 510 files/folders (including Root Folders), and the maximum number of folders is 255. Playback may not be performed if a disc exceeds the limitations described above.
01GB00CDE-9870R.book Page 15 Wednesday, November 1, 2006 10:47 AM
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal taste.
Press and hold A.SEL for at least 2 seconds to activate the Sound Setting mode. Press A.SEL repeatedly to select the HPF mode.
BASS TREBLE HPF BASS TITLE
to select the desired HPF frequency.
120 Hz 160 Hz
Displaying the Text
Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name and the tag, etc., while playing MP3 files.
If no operation is performed for 15 seconds, the unit will return to normal mode automatically. The function is inoperable when DEFEAT is set to ON.
The display will change every time the button is pressed. If you want to change the display when the text scroll is set to MANU, press TITLE while the text is scrolling. If the scroll has been completed, press TITLE to scroll the text again.
The display in Radio mode: If there is PS (Programme Service Name) PS (Programme Service Name)*1 PS (Programme Service Name) RADIO TEXT
If there is no PS (Programme Service Name) FREQUENCY RADIO TEXT FREQUENCY
The display in CD mode: TRACK NO./ELAPSED TIME TEXT (DISC NAME)*2 TEXT (TRACK NAME)*2 TRACK NO./ELAPSED TIME The display in MP3 mode: FILE NO./ELAPSED TIME FOLDER NO./FILE NO. FOLDER NAME FILE NAME ARTIST NAME*ALBUM NAME* SONG NAME*3 FILE NO./ELAPSED TIME
*1 If TITLE is pressed and held for at least 2 seconds in the PS display mode, frequency will be displayed for 5 seconds. *2 Displayed during playback of a disc with CD text. 3 ID3 tag * If an MP3 file contains ID3 tag information, the ID3 tag information is displayed (e.g., song name, artist name, and album name). All other tag data is ignored.
01GB00CDE-9870R.book Page 16 Wednesday, November 1, 2006 10:47 AM
About the indication display
When displaying Text, the following indicators are lit according to the mode. Indicator/ Mode CD Mode MP3 Mode Folder Name*2 being displayed
You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, Sound Customizing, Visual Customizing, etc., can be modified.
Text (Disc Name*3) being displayed Text (Track Name*3) being displayed
Artist Name* Artist Name* being displayed being displayed Album Name*1 Album Name*1 being displayed being displayed
Song Name*1/ Song Name*1 File Name being being displayed displayed
*1 Tag information If there is no tag information, ARTIST/ALBUM/SONG is displayed. *2 The root folder is displayed as FOLDER. *3 If there is no Text (Disc Name or Track Name), DISC TEXT/ TRACK TEXT is displayed.
Use steps 1 to 4 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item.
Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. Press or to select the desired SETUP menu, and then press / /ENT.
(e.g. Select SUBWOOFER)
FM-LEVEL REGIONAL*1 PI SEEK*2 SUBWOOFER (SUBW SYS)*3 PLAY MODE SCROLLTYPE TEXT SCR POWER IC AUX+ SETUP DEMO FM-LEVEL
*1 Refer to Receiving RDS Regional (Local) Stations (page 8). *2 Refer to PI SEEK Setting (page 9). *3 Displayed only when SUBW is ON.
to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
Adjusting Source Signal Levels
FM-LV HI (Initial setting) / FM-LV LOW
If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level.
01GB00CDE-9870R.book Page 17 Wednesday, November 1, 2006 10:47 AM
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
Playing MP3 Data (PLAY MODE)
CD-DA (Initial setting) / CDDA/MP3
When the subwoofer is on, perform the steps below to adjust the subwoofer output level. 1 In the normal mode, press AUDIO/RTN repeatedly to select the SUBW mode.
SUBW BASS TREBLE BAL DEFEAT VOLUME SUBW FADER. LOUD
2 Adjust the level by pressing
This unit can play back CDs containing both CD and MP3 data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3 data, playback starts from the CD data portion of the disc.
CD-DA: CDDA/MP3: Only the CD data in Session 1 can be played back. CD data, MP3 files in mixed mode, and multisession discs can be played back.
Hierarchy 1 Playlist Artist* Album* Song Podcast Genre* Composer* Hierarchy 2 Song Album* Song Episode Artist* Album* Hierarchy 3 Song Album* Song Hierarchy 4 Song
Direct Search Function
The units direct search function can be used to search for an album, song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/ Genre/Composer mode, you can quickly target any song.
In the search mode, press any one of the preset buttons (1 through 6) to quickly skip over a designated percent of your song content.
Song search example: If there are 100 songs in your iPod, they are divided into 6 groups using percentages (shown below). These groups are assigned to the preset buttons (1 through 6). Example 1: Suppose the song you are searching for is located at around the middle (50%) of your library: press button 4 to jump to the 50th song and press or to find the desired song. Example 2: Suppose the song you are searching for is located near the end (83%) of your library: press button 6 to jump to the 83rd song and press or to find the desired song. All 100 songs (100%) 17% 33% 50% 67% 2 17th song 3 33rd song 4 50th song 5 67th song
For example: Searching by Artist name The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs.
0% Preset buttons Songs 1 First song
83% 6 83rd song
/ESC to activate the search selection mode.
Press and to select the ARTIST search mode, and then press / /ENT.
PLAYLIST GENRE ARTIST ALBUM SONG COMPOSER PLAYLIST PODCAST
Press press Press press Press press
and to select the desired Artist, and then / /ENT. and to select the desired Album, and then / /ENT. and to select the desired Song, and then / /ENT.
Select Playlist/Artist/Album/Podcast/ Genre/Composer
Playlist/Artist/Album/Podcast/Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed.
Press 1 /AF or 2 to select the desired Playlist/Artist/ Album/Podcast/Genre/Composer.
If the song search mode was used to select a song, this function is inactive. If an album is selected during an artist search, other albums by that artist are searchable. This function is inactive during shuffle (M.I.X.) playback.
After pressing and holding / /ENT for at least 2 seconds while in each hierarchy (except SONG hierarchy), all songs of the selected hierarchy are played back. After selecting [ALL] in the search mode with *, press and hold / /ENT for at least 2 seconds to play back all songs in the iPod or selected search mode. While in the search mode, if you press and hold /ESC for 2 seconds, or no operation is performed for 10 seconds, the search mode is cancelled. In the search mode, pressing AUDIO/RTN will return to the previous mode. Search cannot be made during M.I.X. play. NO SONG will be displayed if there are no songs in the selected playlist in the PLAYLIST search mode. NO PODCAST will be displayed if there is no podcast data in the iPod in the PODCAST search mode. If iPod name stored in the iPod is selected in the desired Playlist search mode, and / /ENT is pressed, you can search for all songs in the iPod. Also, if you press and hold / /ENT for at least 2 seconds, all songs in the iPod are played back. Depending on the iPod, podcast search is not supported. If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to Direct Search Function on page 19.
01GB00CDE-9870R.book Page 20 Wednesday, November 1, 2006 10:47 AM
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as M.I.X. on this unit.
Only Repeat One is available for the iPod.
The songs on each album are played back in proper order. Upon completion of all the songs on the album, the next album is selected randomly. This continues until all albums have been played.
A single song is repeatedly played back.
The song is played back repeatedly. RPT (Repeat One)
Song shuffle randomly plays back songs within a selected category (playlist, album, etc.). The songs within the category are played just once until all songs have been played.
To cancel repeat play, select (off) with the above procedure.
M.I.X. (Shuffle Songs) (off) M.I.X.
The songs are played back in random sequence. M.I.X. (Shuffle Albums)
During repeat playback, no other songs are selectable by pressing or.
To cancel M.I.X. play, select (off) with the above procedure.
You can display the tag information of a song in the iPod.
If a song is selected in the album search mode before selecting M.I.X. play, the songs will not play back randomly even when Shuffle Albums is selected.
Each press changes the display. If you want to change the display when the text scroll is set to MANU, press TITLE while the text is scrolling. If the scroll has been completed, press TITLE to scroll the text again. TRACK NO./ELAPSED TIME ARTIST NAME* ALBUM NAME* SONG TITLE* TRACK NO./ELAPSED TIME * TAG information ARTIST/ALBUM/SONG is displayed if there is no tag information. Only alphanumeric characters (ASCII) can be displayed. If the artist, album or song name, created in iTunes, has too many characters, songs may not be played back when connected to the adapter. Therefore, a maximum of 250 characters is recommended. The maximum number of characters for the head unit is 64 (64 byte). Some characters may not be correctly displayed. NO SUPPORT is displayed if text information is not supported by the unit.
Shuffle ALL plays all songs in the iPod randomly. Any one song does not play back again until all songs have been played back.
The songs are played back in random sequence. M.I.X. (Shuffle ALL) (off) M.I.X.
If Shuffle ALL is selected, the selected songs being played back in the search mode are cancelled.
01GB00CDE-9870R.book Page 21 Wednesday, November 1, 2006 10:47 AM
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.
CD Player not functioning. Out of operating temperature range +50C (+120F) for CD. - Allow the vehicles interior (or trunk) temperature to cool. CD playback sound is wavering. Moisture condensation in the CD Module. - Allow enough time for the condensation to evaporate (about 1 hour). CD insertion not possible. A CD is already in the CD player. - Eject the CD and remove it. The CD is being improperly inserted. - Make sure the CD is being inserted following instructions in the CD Player Operation section. Unable to fast forward or backward the CD. The CD has been damaged. - Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism. CD playback sound skips due to vibration. Improper mounting of the unit. - Securely re-mount the unit. The disc is very dirty. - Clean the disc. The disc has scratches. - Change the disc. The pick-up lens is dirty. - Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer. CD playback sound skips without vibration. The disc is dirty or scratched. - Clean the disc; damaged disc should be replaced. Error displays (built-in CD player only). Mechanical error. - Press. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer. CD-R/CD-RW playback not possible. Close session (finalization) has not been performed. - Perform finalization and attempt playback again.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.
Be sure to disconnect the cable from the () battery post before installing your CDE-9870R. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicles electrical system. When making connections to the vehicles electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-9870R to the fuse box, make sure the fuse for the intended circuit of the CDE-9870R has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. The CDE-9870R uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance. Be sure to connect the speaker () leads to the speaker () terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.
Sony XR-CA Sony/Pioneer Sony XR-L 500 V 2001 Sony/Pioneer Sony XR-L 500 X 2001 Sony/Pioneer Sony XR-M Sony/Pioneer Sony CDX-CA 600 X 2002 Sony/Pioneer Sony CDX-CA 700 X 2002 Sony/Pioneer Sony CDX-CA Sony/Pioneer Sony CDX-L 420 V 2002 Sony/Pioneer Sony CDX-M Sony/Pioneer Sony CDX-M Sony/Pioneer Sony CDX-MP Sony/Pioneer Sony CDX-MP Sony/Pioneer Sony KP-CD 600 X 2002 Sony/Pioneer Sony KP-XR 630 X 2002 Sony/Pioneer Sony XR-CA 630 X 2002 Sony/Pioneer Sony CDX-CA 680 X 2003 Sony/Pioneer Sony CDX-L 580X 2003 Sony/Pioneer Sony CDX-M 1000 TF 2003 Sony/Pioneer Sony CDX-M Sony/Pioneer Sony CDX-M 850 MP 2003 Sony/Pioneer Sony CDX-MP Sony/Pioneer Sony CDX-MP Sony/Pioneer Sony KP-DS 680 XMP 2003 Sony/Pioneer Sony MDX-CA 790 X 2003 Sony/Pioneer Sony MDX-M Sony/Pioneer Sony XR-CA 670 X 2003 Sony/Pioneer Sony CDX-F Sony/Pioneer Sony CDX-F Sony/Pioneer Sony CDX-F Sony/Pioneer Sony CDX-F Sony/Pioneer Sony CDX-M Sony/Pioneer Sony CDX-M Sony/Pioneer Sony CDX-R Sony/Pioneer Sony CDX-R Sony/Pioneer Sony CDX-S Sony/Pioneer Sony KP-CT 670 X 2004 Sony/Pioneer Sony KP-CT 670 XMP 2004 Sony/Pioneer Sony MDX-F Sony/Pioneer Sony CDX-DAB Sony/Pioneer Sony CDX-F Sony/Pioneer Sony CDX-F 7750 S 2005 Sony/Pioneer Sony CDX-M Sony/Pioneer Sony CDX-NC Sony/Pioneer Sony CDX-R Sony/Pioneer Sony CDX-R Sony/Pioneer Seite 13 Radioliste Sony CDX-R Sony/Pioneer Sony CDX-R Sony/Pioneer Sony CDX-S Sony/Pioneer Sony MEX-RSony/Pioneer
Sony CDX-DABSony/Pioneer Sony CDX-F50M 2006 Sony/Pioneer Sony CDX-F50M 2006 Sony/Pioneer Sony CDX-GTSony/Pioneer Sony CDX-GT300S 2006 Sony/Pioneer Sony CDX-GTSony/Pioneer Sony CDX-GT700D 2006 Sony/Pioneer Sony CDX-R30M 2006 Sony/Pioneer Sony CDX-RSony/Pioneer Sony CDX-RASony/Pioneer Sony CDX-RASony/Pioneer Sony MEX-1 GP 2006 Sony/Pioneer Sony MEX-RSony/Pioneer Sony MEX-BTSony/Pioneer Sony CDX-GT610U 2007 Sony/Pioneer Seite 14 Autoliste Fahrzeugliste www.Lenkradfernbedienung.de Marke Modell Baujahre Shop-Kabel Alfa Alfa 147 Modelle mit Multifunktionslenkrad Alfa/Citroen Alfa 156 Modelle mit Multifunktionslenkrad Alfa/Citroen GT Modelle mit Multifunktionslenkrad Alfa/Citroen Audi Abis 01/2001 VW/Audi Abis 01/2001 VW/Audi Abis 01/2001 VW/Audi Abis 01/2001 VW/Audi Abis 01/2001 VW/Audi TT 1996 bis 01/2001 VW/Audi Chevrolet Alle aktuellen Modelle (ausser Captiva) Chevi Deawoo Alle aktuellen Modelle Chevi Nissan Micra K12 Ab 2003 (Bordcomputer luft!) Nissan 1 Note Ab 2003 (Bordcomputer luft!) Nissan 1 X-Trail Nissan X-Trail Ford Focus bis Modell 2004 Ford 1 Mondeo bis Modell 2004 Ford 1 Mondeo mit Blp. Navi (ISO) bis Modell 2004 Ford 3 Focus C-MAX ab Modell 2004 Ford 2 Ford Mondeo (MOST) ab Modell 2004 Ford 2 Galaxy ohne Inneraum CAN Modell 2005 VW/Audi Focus (MOST) ab Modell 2004 Ford 2 Opel alle aktuellen Modelle bis Mod.2005 Opel Ohne MOST-Stecker Peugeot in Vorbereitung Renault 96 bis 2002 Renault Display Alle Modelle (bitte Anleitung MIT exter-nem anfordern!) Display Renault Twingo 98 bis 00 Renault 10-Pol Clio I und II 90 bis 00 Renault 10-Pol OHNE
CD2502S DAV-DZ231 CDX-P650 600SI EW878F Review WM551 Microscope TX-SR600 KRF-X9995D Motorola C117 AVR-3801 CDR-630 Directroute 500 VA HT-TX725 AK77PRO Furuno 1623 PCG-V505ECP NV-GS500 Dvdr3350H-37B SD-P71SK SV0301H GA-6BXC RQ-SX30 SGH-T400 Aspire-9500 Yamaha D-65 MP-C641 Yamaha PB1 KLV-40BX401 Traffic IC-T90A ATS-909 MM-DG25 NWZ-B135F 725R-41CD725a034 WD-10150TP SP-A600B 990DB CL-1 Nimh ML-2151N AP-5131 XNV-L77BT DV390 F88020VI AJM180 MDX-C8900R DFL-860E BV-TS2 100X5R 10 Bluetooth 600-1998 M1940A-RZ SCB-100 Series TX-SV636 Deere 5M Quattro CDX-GT150 LGR435 LAV47370 DP-150FX VT-737SP HDR-UX19E ZWF5100 Chartplotter XL-S10H Roadwin Duocam III Voyager PRO Quad CD66 D-NE20 Fully 8 BMW 325I AX64 PRO 5500C HD4746 XR 400 XL800-2001 BC-700 NWZ-S544 KDL-46W5730 N341I QW104D RH Phone Usb-B2K I D KDL-46V5610 Preamplifier 4X4-2002 CME656 Gzmc200US-GZ-mc200 Dyson DC07 20 MX Photo CVP-409-407 TX-8522 TT200 Delta2 VT440
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101