Alpine CDM-7874RB Manual
Alpine CDM-7874RB, size: 597 KB
Here you can find all about Alpine CDM-7874RB like manual and other informations. For example: review.
Alpine CDM-7874RB manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Alpine CDM-7874RB please write about it to help other people. [ Report abuse or wrong photo | Share your Alpine CDM-7874RB photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Sunseeker Camargue 50 HT (2003)
OVERVIEW Model: Price: V.A.T.: Lying: Name: Reference: Flag: 775 Spain Camargue 50 HT 390.000,00 Paid Reg. Tax: Not Paid
Ampuriabrava (Girona) - ESP
MARINA ESTRELLA - Puerto Deportivo El Masnou, Locales 34-35, 08320 - El Masnou (Barcelona) e-mail: firstname.lastname@example.org | web: www.marinaestrellabrokerage.es
SPECIFICATION Sunseeker Camargue 50 HT
Builder / Designer
Engine: Power (n) x hp: Hours: Volvo D12-715 (2) x Diesel LOA: Beam: Cabines:
16,13mts 4,44mts 2 52,92ft 14,57ft
Deck and Outside Equipment > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
4 underwater lights Additional low level lights 1 at platform area, 1 in each of the lower step risers and 1 next to the shore power socket Additional pair of Alpine Marine 2 way cockpit speakers STM6666 fitted in the underscreen area Additional waterproof AC220V single socket and a coaxial socket fitted in small locker behind the copilot seating area Electric windlass Fresh water deck wash with outlets fwd Gaganeau lava coal BBQ in wetbar Hull colour golden, waterline brown metallic Hydraulic gangway Icemaker in wetbar Liferaft GRP stowage box only fitted on garage top Pair of retractable cleats for tender on port and stbd corners of platform Teak cockpit decking Teak cockpit table Tender winch and recovery system with hand held control
Engine and Electronics
1 dummy domes Autopilot Simrad AP22 Bow thruster 7H Depth sounder Raymarine ST 60 GPSPlotter Raymarine RC 631 Radar Raymarine RL 70 C with 48 Radio VHF Raymarine Shipmate RS 8400 TV aerial Glomex
2 Cabins 6 Disc Alpine Multi CD charger CHM S620 for use with standard Alpine CDM7874RB CD/radio in saloon top box locker Air conditioning 1 x x 16000BTU Flooring saloon and cabins with fitted carpet Galley and bathroom flooring in teak Galley: Ceramic hob, refrigerator, microwave Sharp 20 LCD TV fitted to the shower bulkhead in the style of the 46P in lieu of the standard TV cabinet Teak cabin stair treads Teak surface to the GRP step under the console Vents from saloon aircon unit to helm area 1 in dash and 1 in side combing
Main > Batteries charger > Generator Kohler 6.5kw 50Hz > Holding tank
Photo Gallery (1/3)
Photo Gallery (2/3)
Photo Gallery (3/3)
DISCLAIMER Whilst every care is taken in the preparation of these details their accuracy cannot be guaranteed. They are intended as a guide only and do not constitute part of any contract. The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
USB memory (Optional)
Controlling USB memory (Optional). 17 Playing MP3/WMA/AAC Files with the USB memory (Optional).. 17 USB Memory Connection (Optional). 18 About MP3/WMA/AAC File of USB Memory.. 18
Playback... 19 Searching for a desired Song. 19 Quick Search... 19 Direct Search Function.. 20 Select Playlist/Artist/Album/Genre/ Composer.. 20 Random Play Shuffle (M.I.X.).. 20 Repeat Play... 21 Displaying the Text... 21
In Case of Difficulty.. 22 Specifications.. 24
Installation and Connections
Warning.. 25 Caution... 25 Precautions.. 25 Installation.. 26 Connections.. 27
This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
On Handling USB Memory
To prevent malfunction or damage, note the following points. Read the USB memory Owners Manual thoroughly. Do not touch the terminals by hand or metal. Do not subject USB memory to excessive shock. Do not bend, drop, disassemble, modify or soak in the water. Avoid usage or storage in the following locations: Anywhere in the car exposed to direct sunlight or high temperatures. Anywhere the possibility of high humidity or corrosive substances are present. Fix the USB memory in a location where driver operation will not be hindered. USB memory may not function correctly at high or low temperature. The USB flash memory supports only 512 or 2,048 bytes per sector. Use only certified USB memory. Note that even certified USB memory, may not function correctly depending on its type or state. USB memory function is not guaranteed. Use USB memory according to the terms of agreement. Depending on the settings of the USB memory type, memory state or encoding software, the unit may not play back or display properly. A file that is copy-protected (copyright protection) cannot be played back. USB memory may take time to start playback. If there is a particular file other than audio in the USB memory, it may take considerable time before the file is played back or searched. The unit can play back mp3, wma or m4a file extensions. Do not add the above extensions to a file other than audio data. This non-audio data will not be recognized. The resulting playback may contain noise that can damage speakers and/or amplifiers. It is recommended to back up important data on a personal computer. Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. iPod and iTunes are trademarks of Apple Inc, registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license. Other trademarks and trade names are those of their respective owners. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com
Head unit...1 Power cable..1 Mounting sleeve...1 Carrying case...1 Bracket key...2 Screw (M5 8)...4 Owners Manual... 1 set
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.
Turning Power On and Off
Press SOURCE/ to turn on the unit.
and The unit can be turned on by pressing any other button except (Release).
Turn off the unit power. Remove the detachable front panel. Press RESET with a ballpoint pen or similar pointed object.
Press and hold SOURCE/ turn off the unit.
for at least 2 seconds to
The first time power is turned on, the volume will start from level 12.
Detaching and Attaching the Front Panel
Turn the Rotary encoder until the desired sound is obtained.
Turn off the unit power. Press (Release) at the lower left side until the front panel pops out. Grasp the left side of the front panel and pull it out.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
/MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing /MUTE again will bring the audio back to its previous level.
The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. To protect the front panel, place it in the supplied carrying case. When detaching the front panel, do not apply excessive force as it may result in malfunction.
Press and hold SOUND/SETUP for at least 2 seconds to activate the SETUP mode. Turn the Rotary encoder to select the CLOCK ADJ mode, and then press / /ENT.
The time indication will blink.
Turn the Rotary encoder to adjust the hours while the time indication is blinking. When the hour has been adjusted, press / /ENT.
TUNE/A.ME Preset buttons (1 through 6)
Turn the Rotary encoder to adjust the minutes while the time indication is blinking. Press and hold SOUND/SETUP for at least 2 seconds to return to normal mode.
Listening to Radio
To synchronize the clock to another clock/watch or radio time announcement, press and hold / /ENT for at least 2 seconds after setting the hour. Minutes will reset to 00. If the display shows over 30 minutes when you do this, the time will advance one hour. Pressing /MUTE will return to the previous mode. If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
to select TUNER mode.
Press BAND repeatedly until the desired radio band is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
Press Rotary encoder (AUDIO) repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER* BASS LEVEL TRE LEVEL BALANCE FADER DEFEAT VOLUME SUBWOOFER Subwoofer : +0 ~ +15 Bass level: 7 ~ +7 Treble level: 7 ~ +7 Balance : L15 ~ R15 Fader : R15 ~ F15 Defeat : ON/OFF Volume : 0 ~ 35
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.
Setting the Bass Level
2-3* Turn the Rotary encoder to select the desired
bass level (7~+7).
You can emphasize or weaken the bass level.
If no operation is performed for 5 seconds after selecting the SUBWOOFER, BASS LEVEL, TRE LEVEL, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode. * When the subwoofer mode is set to OFF, its level cannot be adjusted.
Press and hold /ESC for at least 2 seconds to return to normal mode.
Turn the Rotary encoder until the desired sound is obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of BASS LEVEL and TRE LEVEL will return to the factory defaults.
If no operation is performed for 15 seconds, the unit will return to normal mode automatically. The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). The function is inoperable when DEFEAT is set to ON. *1 The adjustment can also be made by pressing Rotary encoder. Refer to Adjusting Subwoofer Level/Bass Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat (page 12).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal preference.
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ears decreased sensitivity to bass and treble sound.
Press SOUND/SETUP repeatedly to select the TREBLE mode.
Press and hold Rotary encoder (LOUD) for at least 2 seconds to activate or deactivate the loudness mode.
The function is inoperable when DEFEAT is set to ON.
Setting the Treble Center Frequency
2-1 Press BAND to select the desired treble center
10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz
Emphasizes the displayed treble frequency ranges.
Setting the Treble Level
2-2* Turn the Rotary encoder to select the desired
treble level (7~+7).
You can emphasize the treble level.
If no operation is performed for 15 seconds, the unit will return to normal mode automatically. The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). The function is inoperable when DEFEAT is set to ON. *2 The adjustment can also be made by pressing Rotary encoder. Refer to Adjusting Subwoofer Level/Bass Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat (page 12).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal taste.
Press SOUND/SETUP repeatedly to select the HPF mode.
Turn the Rotary encoder to select the desired HPF frequency.
OFF 60 Hz 80 Hz 100 Hz
All frequencies above the selected cutoff are output.
If no operation is performed for 15 seconds, the unit will return to normal mode automatically. The function is inoperable when DEFEAT is set to ON.
About the indication display
When displaying Text, the following indicators are lit according to the mode. MP3/WMA/AAC/ USB AUDIO Mode Folder Name*2 being displayed iPhone/iPod/ BT AUDIO Mode
Artist Name*1 Artist Name*1 being displayed being displayed Album Name*1 Album Name*1 being displayed being displayed
Text (Disc Name*3) being displayed
Displaying the Text
Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name and the tag, etc., while playing MP3/WMA/AAC files.
Text (Track Name*3) being displayed
Song Name*1/ Song Name*1 File Name being being displayed displayed
The display will change every time the button is pressed. When the TEXT SCR is set to SCR MANU, press and hold VIEW for at least 2 seconds, the current text will be scrolled one time (except Radio mode).
The display in Radio mode: FREQUENCY CLOCK FREQUENCY
*1 Tag information If there is no tag information, ARTIST/ALBUM/SONG is displayed. *2 The root folder of disc is displayed as FOLDER. The root folder of USB memory is displayed as ROOT. *3 If there is no Text (Disc Name or Track Name), DISC TEXT/ TRACK TEXT is displayed.
Text: Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as text.
Change to a source other than the USB memory mode, then remove the USB memory. If the USB memory is removed in the USB memory mode, data may be damaged. When removing USB memory, pull it out straight. If sound is not output or USB memory is not recognized even when USB memory is connected, remove USB memory once, then connect it again. Route the USB cable away from other cables, etc. After removing the USB memory, close the cover of the USB connection terminal to prevent dust or foreign objects from entering and causing a malfunction.
About MP3/WMA/AAC File of USB Memory
Playing back MP3/WMA/AAC MP3/WMA/AAC files are prepared, then stored to a USB memory. This unit can recognize at least 100 folders (including root folder) and 100 files per folder stored in USB memory. Playback may not be performed if a USB memory exceeds the limitations described above. Do not make a files playback time more than 1 hour. Media supported This device can play back USB memory media. Corresponding File Systems This device supports FAT 12/16/32 for USB memory device.
iPhones/iPods usable with this unit
The unit can be used with the fifth generation and above iPod, iPhone 3G, iPhone, iPod classic, iPod touch, the first generation iPod nano, the second generation iPod nano or the third generation iPod nano only. iPod Shuffle cannot be used, however. Touch wheel or scroll wheel type iPods without the dock connector cannot be connected to the unit. The unit can be used with the following iPhones/iPods.
iPhone 3G (version 2.0) iPhone (version 1.1.4) iPod touch (version 1.0.4) iPod classic (version 1.1.1) iPod nano (3rd generation) (version 1.1) iPod nano (2nd generation) (version 1.1.3) iPod with video (version 1.2.3) iPod nano (1st generation) (version 1.3.1)
For clarity in identifying your model of iPod, please see Apples own document Identifying iPod models at http://support.apple.com/kb/HT1353 This unit does not support iPhone/iPods video playback function, even using a video-compatible cable. If the unit is used with versions of iTunes earlier than 7.6, correct function and performance are not guaranteed.
to switch to the iPod mode.
/ESC to activate the search selection mode.
indicator lights up.
TUNER DISC BT AUDIO*3
Turn the Rotary encoder to select the ARTIST search mode, and then press / /ENT.
PLAYLIST GENRE ARTIST ALBUM SONG COMPOSER AUDIOBOOK PODCAST PLAYLIST
USB AUDIO iPod*1/AUX+*2 AUX*4 TUNER
All 100 songs (100%) 17% 33% 50% 67% 2 17th song 3 33rd song 4 50th song 5 67th song
If a song is selected in the album search mode before selecting M.I.X. play, the songs will not play back randomly even when Shuffle Albums is selected.
83% 6 83rd song
Shuffle ALL plays all songs in the iPhone/iPod randomly. Any one song does not play back again until all songs have been played back.
The songs are played back in random sequence. (off) (Shuffle ALL)
Select Playlist/Artist/Album/Genre/ Composer
Playlist/Artist/Album/Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed.
If Shuffle ALL is selected, the selected songs being played back in the search mode are canceled.
Press 1 or 2 to select the desired Playlist/Artist/ Album/Genre/Composer.
If the song search mode was used to select a song, this function is inactive. If an album is selected during an artist search, other albums by that artist are searchable. This function is inactive during shuffle ( ) playback.
Only Repeat One is available for the iPhone/iPod.
A single song is repeatedly played back.
The song is played back repeatedly. (Repeat One)
To cancel repeat play, select (off) with the above procedure.
During repeat playback, no other songs are selectable by pressing or.
You can display the tag information of a song in the iPhone/iPod.
Each press changes the display. When the TEXT SCR is set to SCR MANU, press and hold VIEW for at least 2 seconds, the current text will be scrolled one time. TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME* ALBUM NAME* SONG TITLE* TRACK NO./ELAPSED TIME * TAG information ARTIST/ALBUM/SONG is displayed if there is no tag information. Only alphanumeric characters (ASCII) can be displayed. If the artist, album or song name, created in iTunes, has too many characters, songs may not be played back when connected to the adapter. Therefore, a maximum of 250 characters is recommended. The maximum number of characters for the head unit is 64 (64 byte). Some characters may not be correctly displayed. NO SUPPORT is displayed if text information is not supported by the unit.
In Case of Difficulty
The sound is not output from the speakers. Unit has no output signal of the internal amplifier. - POWER IC is switched to POW ON (page 16).
iPod does not play and no sound is output. The iPod has not been recognized. - Reset this unit and the iPod. Refer to Initial System Start-Up (page 6). To reset the iPod, refer to the Owners Manual of the iPod.
CD Player not functioning. Out of operating temperature range +50C (+120F) for CD. - Allow the vehicles interior (or trunk) temperature to cool. CD playback sound is wavering. Moisture condensation in the CD Module. - Allow enough time for the condensation to evaporate (about 1 hour).
Indication for CD Player
A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate that is supported by the unit.
No CD is inserted. - Insert a CD. Although a disc is inserted, NO DISC is displayed and the unit does not start to play or eject the disc. - Remove the disc by following these steps: Press the button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer.
A copy-protected WMA file was played back. - You can only play back non-copy-protected files.
Mechanism error. 1) Press the button and eject the CD. If not ejecting, consult your Alpine dealer. 2) When the error indication remains after ejecting, press the button again. If the error indication still does not turn off after pressing the button for a few times, consult your Alpine dealer.
When ERROR is displayed: If the disc cannot be ejected by pressing , press the RESET switch (refer to page 6) and press again. If the disc still cannot be ejected, consult your Alpine dealer.
Text information that is not recognizable by the unit has been input. - Use a USB memory device with input text information that is supported by the unit.
Indication for iPod Mode
The iPhone/iPod is not connected. - Make sure the iPhone/iPod is correctly connected (refer to Connections). Make sure the cable is not bent excessively.
There are no songs in the iPhone/iPod. - Download songs to the iPhone/iPod and connect to this unit.
Indication for USB memory
Communication error. - Turn the ignition key off, and then set to ON again. - Reset the iPod. - Check the display by reconnecting between the iPhone/iPod and this unit, using the iPhone/iPod cable.
Abnormal current is run to the USB connector device (an error message may be displayed if the USB device that is not compatible with the unit is connected). USB memory is a malfunction or it is shorted. - Connect another USB memory.
Caused by the iPhone/iPod Software Version not being compatible with this unit. - Update the iPhone/iPod Software Version to be compatible with this unit.
A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit.
The iPhone/iPod is not verified. - Reset the iPod. - Try another iPhone/iPod, if available.
A USB memory is not connected. - Make sure the USB memory device is correctly connected and the cable is not excessively bent.
Power surge error. - Excessive voltage/current is supplied to the iPhone/iPod. - Try another iPhone/iPod, if available.
Indication for all Modes
No song (file) is stored in the USB memory. - Connect the USB memory device after storing songs (files).
Malfunction occurred as a result of the speaker cable shorting on the car chassis. - Route the cable correctly, and set POWER IC to POW ON (page 16). If the above solution does not work, consult your nearest dealer.
FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation PICKUP Wave length Laser power USB SECTION USB requirements USB 1.1/2.0 Max. Power Consumption 500 mA USB Class Mass Storage File System FAT 12/16/32 MP3 Decoding MPEG-1/2 AUDIO Layer-3 WMA Decoding Windows Media Audio AAC Decoding AAC-LC format.m4a file Number of Channels 2-Channel (Stereo) Frequency Response* 5-20,000 Hz (1 dB) Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz) * Frequency response may differ depending on the encoder software/bit rate. GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS 4* * Primary amplifier ratings per CEA-2006 Standard Power output: measured at 4 Ohms and 1% THD+N S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2 V/10 k ohms Bass 14 dB at 100 Hz Treble 14 dB at 10 kHz Weight 1.5 kg (3 lbs. 4 oz) 795 nm CLASS I 5-20,000 Hz (1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) 530-1,710 kHz 22.5 V/27 dB 87.7-107.9 MHz 9.3 dBf (0.8 V/75 ohms) 13.5 dBf (1.3 V/75 ohms) 80 dB 65 dB 35 dB 2.0 dB
CHASSIS SIZE Width Height Depth NOSEPIECE SIZE Width Height Depth 170 mm (6-3/4") 46 mm (1-13/16") 25 mm (1") 178 mm (7") 50 mm (2") 161 mm (6-3/8")
Due to continuous product improvement, specifications and design are subject to change without notice.
Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.
FULL SPEEDTM Connection Cable (KCE-433iV) (sold separately) KCE-400BT Connection Cable (Included with KCE-400BT) Front AUX Input Terminal
This terminal allows for input of audio from an external device (such as a portable player), using a commerciallyavailable converter cable.
Power Supply Connector Right Front (+) Speaker Output Lead (Gray) Right Front () Speaker Output Lead (Gray/Black) Right Rear () Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet)
USB Connection Terminal
Connect USB memory (sold separately)
To prevent external noise from entering the audio system. Locate the unit and route the leads at least 10 cm away from the car harness. Keep the battery power leads as far away from other leads as possible. Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information. Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (Alpine), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
This Warranty covers Car Audio Products and Related Accessories (the product). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
C You must supply proof of your purchase of the product. D You must package the product securely to avoid damage during shipment. To prevent lost packages it is recommended to use a carrier that provides a tracking service.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first consumer purchase.
HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts and labor) in the product.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM INCIDENTAL DAMAGES REFERS TO EXPENSES OF TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE ORIGINAL PURCHASERS TIME, LOSS OF THE USE OF THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF THE PRODUCT. THE TERM CONSEQUENTIAL DAMAGES REFERS TO THE COST OF REPAIRING OR REPLACING OTHER PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
WHAT IS NOT COVERED:
This Warranty does not cover the following: A Damage occurring during shipment of the product to Alpine for repair (claims must be presented to the carrier). B Damage caused by accident or abuse, including burned voice coils caused by over-driving the speaker (amplifier level is turned up and driven into distortion or clipping). Speaker mechanical failure (e.g. punctures, tears or rips). Cracked or damaged LCD panels. Dropped or damaged hard drives. C Damage caused by negligence, misuse, improper operation or failure to follow instructions contained in the Owners manual. D Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature. Any cost or expense related to the removal or reinstallation of the product. E Service performed by an unauthorized person, company or association. F Any product which has the serial number defaced, altered or removed. G Any product which has been adjusted, altered or modified without Alpines consent. H Any product not distributed by Alpine within the United States, Puerto Rico or Canada. I Any product not purchased from an Authorized Alpine Dealer.
HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center.
HOW TO OBTAIN WARRANTY SERVICE:
A You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges. B You should provide a detailed description of the problem(s) for which service is required.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number for your nearest Authorized Alpine Service Center. CAR AUDIO NAVIGATION 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A. ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Do not send products to these addresses. Call the toll free telephone number or visit the website to locate a service center.
Yamaha M-65 ACX450 Dimage 7I Comfort DVP3020K Microfiche DCP-150C KRC-858R Dvd 8 B48awyn761 AZ1575 DVP-FX921 B1030A LD-F7920ST DWM-152 1900-305 P-965 37WLT66 CQ-C1001NE DLS MW12 LE46F86BD 4000N Splendid LM-U4050A OT-255D AU-717 HC-670 Review Prestige 660H PS-50Q96HD YP-Q1 LBP3000 HP 9S MRV-F345 ETW4300TQ 2 D Nikon F65 ECR 5600 Mvrsm12 MS-3448GRK LN46C540 Printer 26LC7R DLS PS4 XV-N322S LAC-M0510 NC6000 Discovery SE MDX-CA680X DSC-T200 R KDL-46HX700 Mark IV CME UF Infiniti G20 RP200 Package 4 TA-VE610 ZM80D-HP GT-I8510 16 FAX 4640 Mini PRO Epson V33 KD-G721 Hyundai Getz NAD T763 Cygnus125-2006 CR 30T2 Dect2112S XL700-2000 40056 BLC30A VCE-175 2530 DL Kxtg6411GR 400G Wide 3300 RDS 927 TAM LA40R71BA Samsung G810 Sigmatek X300 XDR-M1 Dimage 7D BDV-T11 KX-FLM662CX Ho-2007 GD200 DTH8650E DRA-500AE Mcd700 DHR-8105S Powerlook II YZ85-2007 CMT-BX77DBI DEH-2300RB AP 2700 KV-32LS60B Vaporateurs DEC10 Radio WS9850 MDR-EX300
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101