Reviews & Opinions
Independent and trusted. Read before buy Alpine DHA-S680!

Alpine DHA-S680

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Alpine DHA-S680, size: 4.7 MB
Related manuals
Alpine DHA-S680P

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Alpine DHA-S680About Alpine DHA-S680
Here you can find all about Alpine DHA-S680 like manual and other informations. For example: review.

Alpine DHA-S680 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Alpine DHA-S680 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Alpine DHA-S680 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

O IPI OY O PIP IPI OY A O AP O PIP AP O HY N DO 1. AP OO AP O PIP YO IPI 2. AP O AP RO 3. AP O O PIP IPI KE 4. AP O AP O PIP IPI 5. AP O AP O PIP 6. AP O AP O 7. AP O AP 8. AP 9. AP
NOTES When the magazine is inserted, the changer will run a check of its contents automatically. If a CD changer is connected to the DHA-S680 input, its output will be muted during this disc check.

Removing discs

Press the eject button to eject the magazine, then remove the magazine.

Eject button

Cautions on using the magazine The CD magazines or accessories included with the CD changer cannot be used with this product. Disc trays for the CD changer magazines cannot be used with this product's magazine. Although these trays will fit, using them may damage this product. Never use disc trays for CD changer magazines in the DVD changer magazine. Do not forcibly remove the magazine. Only one disc can be inserted per slot. Attempting to insert two or more discs will result in damage. Never remove the tray from the magazine. When the ignition key is set to ACC or ON, the magazine can be removed even when the power setting of the unit is set to OFF.

CO ITA L AU

Pull the tray lever with your finger and pull the disc tray out of the magazine. Take care not to touch the discs data side when removing discs. (See PRECAUTIONS on page 4.)

Magazine

Tray lever

INS ERT THE

EAC LAB H COM EL SUR PAC FAC T DIS E FAC C ING WITH UP
NOTE Do not remove the disc tray from the magazine. When the disc tray is pulled out from the magazine, do not pull it out with excessive force. Doing so will cause breakdown.

L DN VO

VOL UP
Set the head units source to DVD Changer or CD Changer. The power turns on.
NOTE The head units sources vary depending on the head unit connected, system components and Ai-NET setting of DHA-S680.

DISP. TUNER RPT DISC

To turn the power off, change the head units source.

DISC DN DISC UP

NTSC/PAL
When not connected with a head unit by using an Ai-NET
Caution When not connected with a head unit by
Play Position Memory Function Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again. The play position memory is cancelled when the magazine is removed or the disc is changed.
using an Ai-NET If the DHA-S680 is not connected to an Ai-NET compatible head unit, read the section Changing the system settings (page 48) thoroughly and set the H.U. CONTROL setting to OFF before using it.

16-20 DHA-S680 (E) 20 02.2.19, 11:14 AM
Changing the language settings
The audio language, subtitle language and menu language can be set according to your preferences.
NOTE When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicles battery is disconnected.

AUDIO (audio languages)

The setup screen for the selected language is displayed.
In the stop mode, press and hold the SET button for at least 2 seconds. The setup menu appears.
SUBTITLE (subtitle languages)
MENU LANGUAGE (menu languages)
NOTE This operation cannot be performed in the PRE-STOP mode. When the disc is being played, press the s button twice to set the stop mode.

ORIGINAL

Use the Joystick to select LANGUAGES, then press the ENT button. Use the Joystick to make the selection, then press the ENT button. Use the Joystick to select the desired language, then press the ENT button.
The disc is played with the audio language set as the priority language for the disc. (AUDIO only)
The disc is played with the subtitle language set as the priority language for the disc. (SUBTITLE/ MENU LANGUAGE only)

OTHERS

Set the audio language produced from the speakers.

SUBTITLE

Set the language of the subtitles displayed on the screen.

MENU LANGUAGE

Set this to play the disc with a language other than one of the languages displayed. Use the keys 0 to 9 to input the 4-digit language code, then press the ENT button. For the language codes, refer to List of language codes (page 59).
NOTES If the disc does not include the selected language, the discs default language is set. Languages set upon shipment from the factory: Audio language : ORIGINAL Subtitle language : AUTO Menu language : AUTO Press the RTN button to return to the previous screen.
Set the language used for the menus (title menu, etc.).
Press and hold the SET button for at least 2 seconds. The settings are stored and the set up mode is canceled.
Use the Joystick to make the selection, then press the ENT button.

4 : 3 LETTERBOX

Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen. The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie.
Changing the TV screen settings
Use the procedure described below to set the output screen according to the type of TV monitor being used.

4 : 3 PAN-SCAN

Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible.

Still Picture

If this screen appears, change the level as follows: To change parental level and play, press the ENT button. To play without changing the parental level, press the s button. (When the s button is pressed, playback will be at the parental level set with Setting Parental Lock. )
Move the Joystick up and down to choose ON or OFF and, then press the ENT button.
The digital signals recorded on the DVD disc with 96 kHz/24bit, 96 kHz/20bit, 96 kHz/16bit, 48 kHz/ 24bit, 48 kHz/20bit sampling are converted into digital signals with 48 kHz/16bits sampling for output from the optical cable. Set to ON at time of shipment from factory.
Changing the down sampling setting
Some DVDs are recorded using a 24-Bit/96 kHz linear PCM (LPCM) signal. In order to play these discs, the signal must be downsampled to 48 kHz/16 bit digital signals before being output from the optical output.
The digital signals recorded on the DVD disc with 96 kHz/24bit, 96 kHz/20bit, 96 kHz/16bit, 48 kHz/ 24bit, 48 kHz/20bit sampling are not converted into digital signals with 48 kHz/16bits sampling. There is no output from the optical cable.
Use the Joystick to select DOWN SAMPLING, then press the ENT button.
Changing the digital output setting
Use the following procedure to set the digital audio signal output from the DHA-S680.
Use the Joystick to select DIGITAL OUT, then press the ENT button. Use the Joystick to make the selection, then press the ENT button.
The digital output is switched automatically according to the type of audio signals being played. Be sure to select AUTO when you want to connect a digital audio processor and play Dolby Digital audio. AUTO is selected upon shipment from the factory.
The audio signals recorded on the disc are converted into 48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs and CDs) linear PCM audio signals for output.
Press and hold the SET button for at least 2 seconds. The set up are stored and the set up mode is canceled.
Optical digital audio output (when a digital audio processor is connected) DTS DTS NG NG Dolby Digital Dolby Digital LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) NG LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) NG LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) NG LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) NG LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) NG LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (44.1kHz) LPCM (44.1kHz) DTS DTS NG NG Analog audio output (Ai-NET, RCA output) NG NG NG NG OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK NG NG NG NG

During playback, press the A.PROC button. The setting menu appears.
Use the Joystick to select PARAMETRIC-EQ, then press the ENT button.
Press the A.PROC button to close the digital audio processor screen and return to the playback screen.
NOTE When connected with PXA-H900, DHA-S680 cannot make parametric equalizer adjustment.
Adjusting the surround settings
This adjustment is not possible when Dolby Digital or Pro Logic is turned on for the DHAS680s audio output.
Storing the surround settings
Six kinds of parametric EQ adjustment or setting contents can be memorized.
Use the Joystick to select SURROUND, then press the ENT button. Use the Joystick to select the surround mode, then press the ENT button. There are six surround modes.
Use the Joystick to select PRIVATEMEMORY, then press the ENT button. Use the Joystick to select WRITE, then press the ENT button.
Press the ENT button. The level (LV) value turns yellow. Use the Joystick to adjust the level (LV), then press the ENT button. Use the Joystick to select the time (echo time), then press the ENT button.
Use the Joystick to select the memory location at which you want to store the settings (PRIVATE-MEMORY 1 to PRIVATE-MEMORY 6), then press the ENT button.
Use the Joystick to adjust the time, then press the ENT button.
NOTE Press the RTN button to return to the previous screen. NOTE Press the RTN button to return to the previous screen.
Adjusting the time correction (only when connected with PXA-H510)
Eliminate time delays resulting from the distance between the listening position and the speakers.
Recalling the surround settings
Use the Joystick to select TIMECORRECTION, then press the ENT button. Use the Joystick to select the speaker to be adjusted, then press the ENT button.
Use the Joystick to select SURROUND, then press the ENT button. Use the Joystick to select the memory location you want to recall (PRIVATE-MEMORY 1 to PRIVATE-MEMORY 6), then press the ENT button.
NOTE When connected with PXA-H900, the DHA-S680 cannot make time correction adjustment. (The adjustment menu is displayed.)

Using the Pro Logic mode

Switch between the Dolby Digital input and the Pro Logic input.
ADJUST Setting the speaker mode
NOTE This adjustment cannot be made when Dolby Pro Logic is set to OFF.
Use the Joystick to select DOLBY SURROUND MODE, then press the ENT button. Use the Joystick to make the selection, then press the ENT button.
Use the Joystick to select ADJUST, then press the ENT button. Use the Joystick to select the speaker to be set (FRONT, CENTER or REAR), then press the ENT button.

DOLBY DIGITAL

DOLBY DIGITAL is set automatically when the disc is Dolby Digital compatible and the DVD video players audio output setting is set to AUTO.

DOLBY PRO LOGIC

Use the Joystick to switch the mode.

LARGE/SMALL

CENTER
DOLBY PRO LOGIC or OFF can be selected when the disc is Dolby Pro Logic compatible and the DVD video players audio output setting is set to LPCM. When OFF is selected, the surround settings cannot be adjusted.

OFF/LARGE/SMALL

Use the Joystick to adjust the level, then press the ENT button.
ADJUST Mixing the rear audio channels
Use this function to mix the audio signals for the front to those output from the rear speakers.
ADJUST Adjusting the acoustic image
Use the Joystick to select ADJUST, then press the ENT button. Use the Joystick to select REAR MIX, then press the ENT button.
Use the Joystick to select ADJUST, then press the ENT button. Use the Joystick to select BI-PHANTOM, then press the ENT button.
Use the Joystick to select the mode (ON or OFF), press the ENT button.
NOTE The REAR MIX setting is automatically set to OFF when the rear speaker is set to OFF.
Use the Joystick to select the mode (ON or OFF), then press the ENT button.
NOTE The BI-PHANTOM setting is automatically set to OFF when the center speaker is set to OFF.
Use the Joystick to select the level item, then press the ENT button. Use the Joystick to adjust the level, then press the ENT button.
Use the Joystick to select the level item, then press the ENT button.
ADJUST Center speaker time compensation
ADJUST Rear speaker time compensation
NOTE Compensation is not possible when the center speaker is set to OFF.
NOTE Compensation is not possible when the rear speakers are set to OFF.
Use the Joystick to select ADJUST, then press the ENT button. Use the Joystick to select CENTER DELAY, then press the ENT button.
Use the Joystick to select ADJUST, then press the ENT button. Use the Joystick to select REAR DELAY, then press the ENT button.
ADJUST Adjusting the speaker level
During playback, press the A.PROC button. The setting menu appears. Use the Joystick to select ADJUST, then press the ENT button.
ADJUST Achieving powerful sound at low volumes
Press and hold the BAND button for at least 2 seconds to switch the ADJUST screen.

Mounting

Mounting the remote control sensor unit
NOTES When using a monitor with a built-in remote control sensor, such as the CVA-1006, the external sensor is not used. When mounting the unit with double-sided adhesive tape, make sure the mounting surface is dry and free from dirt or grease.
Velcro tape (Before putting on the holder, clean dirt on the mounting location.)

Installation

Caution Be careful that the vehicle's wiring does not touch the DHA-S680. If the wiring comes in contact with the DHAS680, their insulation may be damaged due to vibrations generated while the vehicle is running. This can result in short-circuits. Make sure there is enough clearance between the DHA-S680 and the vehicles wiring to prevent contact.
Press the double-sided adhesive tape onto the back of the remote control sensor unit.
Before completing the sensor mounting, make sure the location selected is within the operating range of the remote control. Peel off the backing of the adhesive tape and press the sensor onto the selected mounting location, or inside of the remote control holder.

Remote Control Holder

NOTES To prevent external noise from entering the audio system. Locate the unit and route the leads at least 10 cm away from the car harness. Keep the battery power leads as far away from other leads as possible. Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors. Contact them for further information. Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
Remote Control Sensor Unit
Remove the shipping keys. Three keys are mounted to the DHA-S680s bottom panel to protect the product during transportation. Be sure to remove these keys before installing the DHA-S680. So as not to lose the keys, store them in the special plastic pouch provided with the DHA-S680 and cover the key holes with the included dust-prevention seals.
Change the position of the springs. With this product, the positions of the built-in anti-vibration springs must be changed according to the angle of installation. The product will not provide the regular resistance to vibration if the anti-vibration springs are not in the correct positions or if the left and right springs are in different positions. The anti-vibration springs can be placed at one of five angles. The springs are set to the H angle upon shipment from the factory. To change this angle, follow the instructions given below. 1 Change the position of the springs using a finger. 2 Stick on the left and right 0 side surface cover labels. 0 Be sure to apply the H cover labels after setting 90 V the position of the 90 springs so as to protect the interior of the product from dust or dirt which may cause malfunction. 3 Check the position of the springs. Make a final check of the position of the springs using the five small holes in the left and right side surface cover labels.

NOTE The eject operation cannot be performed if the keys are mounted when the power is turned on. Turn the power off, then remove the keys.
Install the L-shaped bracket. Determine the position and angle of installation. Referring to step 3, change the position of the springs according to the angle of installation. Install the L-shaped bracket 2 according to the angle of installation. Fasten it in place using the double washer screws (M4x8) 6.
Floor base installation 1 Determine the position under the carpet at which the unit is to be installed. Insert the hexagonal bolts (M6x25) 5 into the floor base 3, then mount directly on the floor using the hexagonal washer faced selftapping screws (M5x15) 1.

L-shaped bracket holes

s Example of Installation Using Attached Lshaped bracket.

Vertical

Use one of each of holes 3 and 6 , and fasten the two screws diagonally.

Horizontal

Use one of each of holes 1 and 6 , and fasten the two screws diagonally.

Diagonal

To be fastened using the holes 4 and 3.
3 Make X-shaped cuts in the carpet.
To install vertically, attach to the floor using the hexagonal washer faced self-tapping screws (M5x15) 1.
Install on top of the carpet using the hexagonal washer faced nuts (M6) 4.
NOTE When installing vertically and using an audio RCA cable, always use an L shaped connector. Using a straight shaped connector could damage the connector and cause a malfunction.

Horizontal installation

Suspension from the Rear Tray
WARNING Do not damage pipe or wiring when drilling holes.
NOTE When installing horizontally, make sure that the DVD magazines slot is on the left side.
Fasten the L-shaped brackets 2 to both sides of this unit.

Vertical installation

NNOTES When installing vertically, make sure that the DVD magazines slot is on the top side. When installing vertically and using an audio RCA cable, always use an L shaped connector. Using a straight shaped connector could damage the connector and cause a malfunction.
Drill holes about 6mm in diameter and fasten securely with shouldered hexagonal bolts (M6x50) 7 and shouldered hexagonal nuts (M6) 4.
Installing directly on the floor
To install horizontally, attach to the floor using the hexagonal washer faced self-tapping screws (M5x15) 1.
Turn the ignition key on and check that the unit is operating properly, referring to the operating instructions. Check that the vehicles equipment (horn, stop lights, etc.) are operating properly.

Connections

10 Press and hold the SET button for at least 2
seconds. The settings are stored in the memory and the setting mode is canceled.
11 Press and hold the V.OUT button on the remote
control unit for at least 2 seconds to turn the power off. Disconnect the remote control sensor unit.
NOTE When not connecting an Ai-NET compatible head unit, do not disconnect the Remote Control Sensor Unit.
12 Turn the vehicles ignition key off, then turn it

back on.

13 Switch the head units source to check that the
DHA-S680s power turns on. Insert a disc and check that the picture and sound are properly output. If the power does not turn on, start the setting procedure over from the beginning.
Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H510/PXA-H900) and TV Monitor
Remote Control Eye Jack Remote Control Eye DVD Changer DHA-S680 Digital Output Terminal (Optical) Digital Input Terminal (Optical) (Changer)

Audio Output Connector

Video Output Connector
Head Unit non-compatible Ai-NET (Sold Separately)
Digital Audio Processor PXA-H510/PXA-H900 (Sold Separately)

RCA Extension Cable

AUX Video Input Terminal (AUX1) AV-Interface Unit TME-M790 etc. (Sold Separately) Monitor TME-M790 etc. (Sold Separately)
Only when connecting with rear monitor AUX Audio Input Terminal (AUX1) RCA Extension Cable Remote Control Input Lead (White/Brown) Remote Control Output Lead (AUX1) (White/Brown)

Setting of DHA-S680

The DHA-S680s system settings must be made after connections are completed. Before fixing the unit in place, refer to page 48 to change the system setting. Setting Item Ai-NET setting H.U.CONTROL setting Setting CD-CHG OFF
NOTES If using in a system with a head unit that is not fully Ai-NET compatible (no processor control) and a digital audio processor, do not connect the head units Ai-NET cable. Only connect the DHA-S680 and digital audio processor using an optical fiber cable and its own Ai-NET cable. Use the head units analog output (Front or rear) connected to the analog input of the processor. This will allow some of the processors functions to be controlled from the DHA-S680. When connecting only to a digital audio processor (with a non-Alpine head unit or Alpine head unit without Ai-NET), it is possible to use both an optical fiber cable and an Ai-NET output cable. In this case the digital audio processor can be controlled from the DHA-S680. When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/ brown). Use the remote control sensor unit included with the DHA-S680. Be sure to connect the switched Power Lead (Ignition). Also refer to the operating instructions of the other products in the system.

The DHA-S680s system settings must be made after connections are completed. Before fixing the unit in place, refer to page 48 to change the system setting. Setting Item

Setting DVD-CHG ON

Ai-NET setting H.U.CONTROL setting
AUX Video Input Terminal (AUX2)
AUX Video Input Terminal (AUX1) AUX Audio Input Terminal (AUX1) Remote Control Output Lead (AUX1) (White/Brown) Ai-NET Cable
AUX Audio Input Terminal (AUX2)
Remote Control Input Lead (White/Brown) Ai-NET Connector (Gray)
DVD Player DVA-5205 (Sold Separately)
Ai-NET Connector (Black) Ai-NET Cable
RCA Extension Cable RCA Extension Cable RCA Extension Cable
Digital Output Terminal (Optical)
Remote Control Output Lead (AUX2) (White/Brown)

Fiber Optic Cable

Digital Input Terminal (Optical) (DVD)

Ai-NET Input Connector

Fiber Optic Cable Remote Control Input Lead (White/Brown) Digital Output Terminal (Optical) Video Output Connector Ai-NET Connector (Black)
Digital Input Terminal (Optical) (Changer)
Digital Audio Processor PXA-H510/PXA-H900 (Sold Separately) Ai-NET Output Connector

Ai-NET Cable

Digital Output Terminal (Optical), DVD Changer DHA-S680 Ai-NET Connector (Gray)

Not Usable

CD Changer

(Sold Separately)

NOTES Be sure to switch the head unit's system switch before turning the power on. When connecting the DVD player (DVA-5205), be sure to connect the DVA-5205's video output/audio output (when using a rear monitor) to the AV head unit's AUX1. Connect the DHA-S680's video output to the AUX2. The switched Power Lead (Ignition) connection is not needed. Also refer to the operating instructions of the other products in the system. To connect a rear monitor, connect to the front monitor's RCA output (TV Tuner Box). Inserting a magazine into the DHA-S680 while a connected CD changer is playing, causes the CD Changer audio to mute. The CD Changer will unmute as soon as the DHA-S680 Disc Check is completed. Connect the optical digital output of the DHA-S680 to the CHANGER connectors of the digital audio processor. This ensures the proper transfer of the digital data stream so the Dolby Digital 5.1 Channel Surround and other effects can be fully enjoyed. When combining the DHA-S680 and the CD changer (CHA-S624), the optical digital output of the CHA-S624 cannot be used.

Connecting an Ai-NET compatible Head Unit (Head Unit available after January 2001: CDA-7990/CDA-7977/CDA-7878 etc.), Digital Audio Processor (PXA-H510/PXA-H900) and TV Monitor
Monitor TME-M790 etc (Sold Separately) Head Unit with Ai-NET (Sold Separately)
AV-Interface Unit TME-M790 etc (Sold Separately)
Ai-NET Input Connector Digital Audio Processor PXA-H510/PXA-H900 (Sold Separately) Digital Input Terminal (Optical) (Changer) Ai-NET Cable Ai-NET Connector (Black) Ai-NET Output Connector
AUX Video Input Terminal (AUX1)
Remote Control Output Lead (AUX1) (White/Brown) Fiber Optic Cable
DVD Changer DHA-S680 RCA Extension Cable
Connecting more than 2 CD Changers using the Versatile Link Terminal KCA-410C
Ai-NET Input Connector Digital Audio Processor PXA-H510/PXA-H900 (Sold Separately) Digital Input Terminal (Optical) (Changer) Ai-NET Cable Digital Output Terminal (Optical) Ai-NET Connector (Black) Ai-NET Output Connector Fiber Optic Cable RCA Extension Cable
Remote Control Input Lead (White/Brown)
Ai-NET Connector (Gray) Ai-NET Connector (HEAD UNIT)
Digital Output Terminal (Optical), can't be connected
Ai-NET Cable Digital Output Terminal (Optical), Not Usable
Ai-NET Connector (CHANGER 2)
VERSATILE LINK Terminal KCA-410C (Sold Separately)
Ai-NET Connector (CHANGER1)
CD Changer (Sold Separately) Ai-NET Cable
NOTES Be sure to switch the head unit's system switch before turning the power on. The switched Power Lead (Ignition) connection is not needed. Also refer to the operating instructions of the other products in the system. To connect a rear monitor, connect to the front monitor's RCA output (TV Tuner Box). Inserting a magazine into the DHA-S680 while a connected CD changer is playing, causes the CD Changer audio to mute. The CD Changer will unmute as soon as the DHA-S680 Disc Check is completed. Connect the optical digital output of the DHA-S680 to the CHANGER connectors of the digital audio processor. This ensures the proper transfer of the digital data stream so the Dolby Digital 5.1 Channel Surround and other effects can be fully enjoyed. When combining the DHA-S680 and the CD changer (CHA-S624), the optical digital output of the CHA-S624 cannot be used.

Playback does not start.

Disc is loaded upside-down. Disc is dirty. A disc not able to playback with this unit is loaded. Parental lock is set. Setup menu is displayed.
Picture is unclear or noisy. Disc is being fast-forwarded or fast-reversed. Vehicles battery power is weak. Monitors fluorescent tube is worn. Image stops sometimes. NO MAG NO DISC Disc is scratched. No magazine is loaded. No disc is loaded. Disc is dirty. Remote control operation is not possible. REGIONAL CODE VIOLATION VIDEO SIGNAL SYSTEM IS NOT CORRECT HI-TEMP Disc does not match regional code number. PAL disc is loaded.
CD-R/CD-RW playback not possible Close session (finalization) has not been performed. Perform finalization and attempt playback again.
Protective circuit is activated to high temperature.
Turn the power (main unit power when not connected) OFF on the connected head unit and then turn the power ON again. If the display still does not disappear, leave the power OFF until the temperature decreases and then turn the power ON again.

Specifications

Signal system...... NTSC/PAL Horizontal resolution..... 500 lines or greater Video output level..... 1Vp-p (75 ohms) Video S/N ratio...... DVD: 70 dB Audio S/N ratio..... DVD: 120 dB/CD: 120 dB Frequency response... DVD: 5 Hz to 22 kHz (1 dB) (48 kHz sampling) DVD: 5 Hz to 44 kHz (1 dB) (96 kHz sampling)/CD: 5 Hz to 20 kHz (1 dB) Dynamic range...... 90 dB or greater Wow & flutter..... Below measurable limit Channel separation...... 90 dB Harmonic distortion...... 0.007% Audio output..... RCA: 1200mV/Ai-NET: 850 mV Power supply..... DC 14.4V (operating range: 11 to 16V) Operating temperature range..... 10 to +60C Weight..... 2.8 kg (6 lbs. 3 oz) External dimensions (W x H x D).... 255 x 77.5 x 203 mm (10 x 3 x 8) Pickup wave length...... 655nm Laser power...... CLASS II
NOTES For improvement purposes, specifications and design are subject to change without notice. The illustrations in this manual may appear different from the actual product due to printing conditions.
Operating the DHA-S680 DVD Video Player
When operating the DHA-S680 set the DVD/ AUDIO switch to the DVD side.

DISP. TUNER RPT DISC CHG

DISC DN DISC UP V. SEL POWER

NTSC/PAL A. PROC BAND

SUB T. ON/OFF AUDIO

OP/ CL

1 Joystick ( P12, 18, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 48, 49) Selects the items displayed on the screen. 2 ENT button ( P12, 15, 16, 18, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 48, 49) Determines the selected item. 3 Rotary Encoder ( P11) Adjusts the volume when only the Digital Audio Processor is connected. 4 MENU button ( P12, 15, 16, 18, 21) Displays the DVD menu. SET button ( P21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 48, 49) Press and hold for 2 seconds to summon the SET UP (initial setting) screen. 5 : Button ( P12, 13, 14, 18) Playback. SLOW Button ( P14) Press and hold for 2 seconds for slow motion playback. 6.;; Button ( P13, 14) Seeks the start for video and audio data. Press and hold for 2 seconds for Rewind of video and audio data. 7 ::. Button ( P13, 14) Seeks the start for video and audio data. Press and hold for 2 seconds for Fast Forward of video and audio data.

8 DISP. Button ( P19) Displays the playback state on the screen. DISC DN ( P11) Press and hold the button for at least 2 seconds to select the disc in the magazine. (Disc No. down) 9 RPT Button ( P16) Repeat playback. DISC UP ( P11) Press and hold the button for at least 2 seconds to select the disc in the magazine. (Disc No. up) p POWER Button ( P10) Turns the power ON and OFF. NTSC/PAL Button ( P11) Press and hold for 5 seconds to change between NTSC and PAL. q DVD/AUDIO Switch ( P7) Used to switch between DVD and Audio operation. w GO TO Button ( P15, 16) Used to go directly to start of selection. TITLE Button ( P12, 18) Press and hold for 2 seconds to display the Title Menu. e RTN Button ( P15, 16, 21, 23, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39) Used to return the selection screen just prior to the present screen. V.OUT Button ( P20, 48, 49) Outputs the DVD video to the monitor when in other source. r. /.: Button ( P14) Used for Pause and Frame-by-Frame playback. t s Button ( P13, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31) Used to stop playback. y A.PROC Button ( P32, 33, 34, 35, 36, 37, 38, 39) Used to summon the processor control screen when connected with the Digital Audio Processor. BAND Button ( P32, 38) Press and hold for 2 seconds to switch the menu screen when controlling the Digital Audio Processor. SUB T. Button ( P18) u Press and hold for 2 seconds to change the subtitles. i ON/OFF Button ( P18) Press and hold for 2 seconds to turn the subtitles ON and OFF. o ANGLE Button ( P17) Press and hold for 2 seconds to change the angle. ; CLR Button ( P15, 16, 23) Remove numbers (one character at a time) that have been selected and input. Press and hold for 2 seconds. All the characters which were selected and input are erased. a AUDIO Button ( P17) Press and hold for 2 seconds to change the audio output. 10-Key Pad ( P11, 12, 15, 16, 18, 21, 23, 24) s Used to input numbers.
NOTE Operation may not be accepted depending on the type of disc and the playback conditions. At such a time the following mark is displayed on the screen:

01.6.18, 8:41 AM

58-64 DHA-S680 (E)
Operating audio for the Alpine AiNET
When operating audio for the Alpine Ai-NET, set the DVD/AUDIO switch to the AUDIO side.
t CHG Button Switches to CHANGER Mode (DVD changer/CD Changer). Changer switching (In case two or more changers are connected.) y V.SEL Button V.SEL Switching

doc1

TME-M770

6.5-INCH TOUCH PANEL WIDE LCD MONITOR
OWNER'S MANUAL Please read before using this equipment. MODE D'EMPLOI Veuillez lire avant dutiliser cet appareil. MANUAL DE OPERACIN Lalo antes de utilizar este equipo.
ALPINE ELECTRONICS, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 Mnchen, Germany Phone 089-640 ALPINE ELECTRONICS OF U.K., LTD. Fletchamstead Highway, Coventry CV4 9TW. U.K. Phone 0870-763
ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord II, B.P. 50016, 95945, Roissy Charles de Gaulle Cedex, France Phone 01-ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-81 ALPINE ELECTRONICS DE ESPAA, S.A. Portal de Gamarra 36, Pabelln, Vitoria (Alava) - APDO 133, Spain Phone 945-283588
Qingdao Dongli Xinhaiyuan Printing Co., Ltd. No.17, jiushuidong road, Qingdao, China
Designed by ALPINE Japan Printed in China (S) 68-00493Z15-B

ENGLISH

Contents

Operating Instructions

WARNING
WARNING.. 2 CAUTION... 3 PRECAUTIONS... 3
Installation and Connections
Warning... 13 Caution.. 13 Precautions.. 14 Installation.. 15 Connections.. 18

Basic Operation

Screen Display ON/OFF. 4 Adjusting the Volume... 4 Switching the Source... 4

LIMITED WARRANTY

Other Useful Features
Setup Operation.. 5 VISUAL EQTM Operation.. 7 Changing to Another Products Source. 8 Operating Other Products.. 9

Information

In Case of Difficulty.. 11 Specifications... 12
This symbol means important instructions. Failure to heed them can result in serious injury or death.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of the vehicle and cause an accident.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch TV/Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV/Video while driving. This may cause a distraction, preventing the driver from looking ahead, thus causing an accident. The driver or other people could be severely injured.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.

KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

PRECAUTIONS

Temperature
Be sure the temperature inside the vehicle is between +45C (+113F) and 0C (+32F) before turning your unit on.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

Fuse Replacement

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder. If the fuse(s) blows more than once, carefully check all electrical connections for shorted circuitry. Also have your vehicles voltage regulator checked.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

Installation Location

Make sure the TME-M770 will not be exposed to: Direct sun and heat High humidity Excessive dust Excessive vibrations After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.

About the Touch Switch

To protect the display, lightly touch the screen with the tip of your finger. If there is no response from the switch, then move your finger away from the screen and touch again.

Switching the Source

Touch the option part of the display to display each source operation screen or source selection screen. If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen.

The source selection screen is displayed by touching CONTROL as described below, depending on the current source. When touched while the current source is GAME, AUX 1 or AUX 2 : Source selection screen When touched while the current source is EXT.DVD: EXT.DVD operation screen Source selection screen When touched while the current source is TV: TV operation screen Source selection screen When touched while the current source is LINK: AUDIO operation screen EXT.DVD operation screen TV operation screen Source selection screen
Main power lamp (VOLUME DOWN) (VOLUME UP)
POWER Illumination sensor

Screen Display ON/OFF

Press the POWER button. To turn off the POWER, press the POWER button again. If properly connected, the monitors main POWER will turn off when the vehicle's ignition switch is off. If the main power lamp illuminates in the STAND BY mode, the vehicle's battery may be discharged. After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.
Touch the source (NAV. / AUX 1/ AUX 2) you want to view.

SOURCE CONTROL

VISUAL EQ

SOURCE

Adjusting the Volume
Adjust the volume level by pressing the button.
The AUX 1, AUX 2 source name changes to the selected mode name in the next item Setup Operation - 6External input name setting. Also, NAV. is only displayed when 7 Navigation Settings in following section, Setup Operation, is set to ON. The operation screens for the different sources as well as the source selection screen turn off automatically if no operation is performed for 5 seconds.

Setup Operation

1 Display mode selection for the display (DISPLAY MODE) Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen. Normal images are expanded in the horizontal direction and are displayed over the entire screen. The expansion ratio increases towards the right and left edges of the screen. Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image are cut off. This mode is suited for 16:9 cinema size images. Normal image (4:3)

Touch the option part of the display to display each source operation screen or source selection screen. If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen. Touch SETUP. Select the desired setting item screen by touching or. Change the setting by touching or.
DISPLAY MODE DIMMER AUX OUT SOUND OUT WIDE HIGH LINK MONITOR

CINEMA

RETURN

NORMAL

2 Dimmer adjustment (DIMMER) HIGH : The backlighting is set to the value adjusted at DIMMER HIGH LEVEL. LOW : The backlighting is set to the value adjusted at DIMMER LOW LEVEL. AUTO : Display illumination can be adjusted automatically depending on the brightness in the car. (Within the range of DIMMER HIGH LEVEL and DIMMER LOW LEVEL)

Continued

3 Rear monitor select function (AUX OUT) LINK : Output the video/audio portion shown on the main monitor, to the rear monitor. AUX1 : Output the AUX1 video/audio to the rear monitor. AUX2 : Output the AUX2 video/audio to the rear monitor. 4 Change sound output (SOUND OUT) MONITOR : Outputs sound through the built-in speakers. HEADPHONE : Outputs sound to headphones if connected. * Note that sound will not be output unless the audio output settings are appropriate. 5 External input sound level adjustment (AUX IN 1 LEVEL/AUX IN 2 LEVEL) HIGH : Sets the sound level at a high level. LOW : Reduces the sound level. 6 External input name setting (AUX IN 1 MODE/AUX IN 2 MODE) Select the name from the following list, to be used for the product using the external input mode. This will apply to the touch switch name at source selection time and the source name during playback change. OFF/TV/EXT.DVD/GAME/AUX 1 (2)/LINK (AUX 1 MODE only)
Set to LINK when an IVA-D300 or VPE-S431 is connected. (Be sure to connect to the AUX IN 1 connector.) Set to EXT.DVD when a DVA-5210, DVA-5205, DHA-S680 or the like is connected. Set to TV if a TV tuner is connected to this product. The way the source operation screens and the source selection screen switches when CONTROL is touched differs according to the selected mode. (See page 4 Switching the Source, step 2.)
9 Dimmer LOW level adjustment (DIMMER LOW LEVEL) Adjusts the LOW LEVEL (0 (MIN) to 15 (MAX)) of the dimmer. p Touch panel adjustment (SCREEN ALIGNMENT) Adjust if the LCD display position and touch panel position do not match. : Reset to default settings. : Changes to adjustment screen. The adjustment method is as follows. 1) Touch from SCREEN ALIGNMENT. The screen changes to the adjustment screen. mark on the lower left side 2) Touch the of the screen. The adjustment screen switches. mark on the upper right side 3) Touch the of the screen. When the adjustment is finished, the screen returns to the SETUP screen.

If you touch RETURN on the adjustment screen, nothing is adjusted and the screen returns to the SETUP screen.
When the settings are completed, touch RETURN. The screen returns to the source selection screen.
7 Navigation settings (NAV. IN) When the navigation is connected, set to ON. 8 Dimmer HIGH level adjustment (DIMMER HIGH LEVEL) Adjusts the HIGH LEVEL (16 (MIN) to 31 (MAX)) of the dimmer.

VISUAL EQTM Operation

4 Tint tone adjustment (TINT) Tint tone can be adjusted from G15 (G MAX) to R15 (R MAX). * Adjustment cannot be made in the NAVIGATION (RGB connection) mode. 5 Contrast adjustment (CONTRAST) Contrast can be adjusted from 15 (LOW) to +15 (HIGH). 6 Screen quality adjustment (SHARP) or. or. 7 Storing (USER MEMORY) You can store the settings adjusted in steps 2 to 6 in the following way. 1) Touch or from USER MEMORY after adjusting settings 2 to 6, and select the preset number you want to store in (P.SET-1, 2). 2) After selecting the preset No., touch WRITE.
P.SET-1, 2 stored here can be accessed from 1 VISUAL EQ mode selection. If 2 to 6 are adjusted, VISUAL EQ mode in 1 changes to CUSTOM.
Touch the option part of the display to display each source operation screen or source selection screen. If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen. Touch VISUAL EQ. Select the desired setting by touching Change the selected setting by touching
Screen quality can be adjusted from 15 (SOFT) to +15 (HARD).

VISUAL EQ MODE

1 VISUAL EQ mode (manufacturers settings) selection (VISUAL EQ MODE) : Default setting. : Suitable for movies with a lot of dark scenes. SOFT : Suitable for movies with computer graphics or animation. SHARP : Suitable for old movies whose resolution is unclear. CONTRAST : Suitable for the latest movies. P.SET-1, 2 : Accesses the preset number stored in step 7 Storing.
To return to the default values after selecting one of the modes between NIGHT M. and CONTRAST then adjusting the image brightness, color density and so on to suit your tastes, set this function to OFF.

OFF NIGHT M.

When setting is completed, touch RETURN. The screen changes to the source selection screen.
2 Brightness adjustment (BRIGHT) Allows the brightness (15 (MIN)~+15 (MAX)) of the picture. 3 Color depth adjustment (COLOR) Change depth can be adjusted from 15 (MIN) to +15 (MAX). * Adjustment cannot be made in the NAVIGATION (RGB connection) mode.

Changing to Another Products Source
When used with touch panel compatible products such as IVA-D300/VPE-S431, sources connected to those products are also selectable. Remote Control Sensor
Touch the option part of the display to display each source operation screen or source selection screen. If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen. Touch SOURCE.
Remote sensor Receives the remote control signal from connected ALPINE products such as navigation and DVD players.
<When the AUX IN 1 connection destination is IVAD300 etc.> Each time you touch SOURCE, the source changes. The source depends on the settings and connections of the product used together with the IVA-D300. Refer to the combined products instructions manuals. <When the AUX IN 1 connection destination is VPES431> After touching SOURCE, change the source with the following operation. 1) Touch P 1/2. The screen changes to P 2/2. 2) Touch to select the desired source. Touch ENTER. Touch RETURN to return to the previous screen.
When SETUP is selected, the setup operation on the VPE-S431 can be performed in the same way as the source selection operation. For details on the setup items, see the VPE-S431s operating instructions.

Operating Other Products

When the TME-M770 is used in combination with a product designed to be operated from the TME-M770 (IVA-D300, DVA-5210, DHA-S680, etc.), some of the operations on the other product can be performed from the TME-M770. Below are some examples of the operations that can be performed. Operating a DVD in the IVA-D300
Touch any point on the display. The AUDIO operation screen appears.

CONTROL

Change pages

MENU P 1/2 ENTER RETURN

TOP MENU

9 p q w e

Operation of DVD in IVA-D300 Touch Long touch Play from start of current chapter 2x fast reverse/8x fast reverse after 5 seconds Play/pause 2x fast forward/8x fast forward after 5 seconds Play next chapter Slow play (from pause mode) PRE STOP/STOP STOP Call out DVD menu Switch page (function guide) Move menu cursor Enter (DVD menu) Call out DVD top menu Switch page (function guide)
Operating the DVA-5210 and the DHA-S680
Touch the option part of the display. The screen changes to the operation screen for each source. Touch CONTROL on the upper right side of the screen. Display the EXT.DVD operation screen.
EXT.DVD CONTROL AUDIO CONTROL
Operation of a DVD changer (DHA-S680) Operation of a DVD player (DVA-5210) Touch Long touch Touch Long touch 2x fast reverse/ Play from start of current chapter Play from start of current chapter 16x fast reverse 8x fast reverse after 5 seconds Play/pause Slow play Play 2x fast forward/ 8x fast forward after 5 seconds Play next chapter Play next chapter 16x fast forward Slow play (from pause mode) PRE STOP/STOP PRE STOP/STOP STOP Switch DISC Switch DISC Call out DVD menu Call out DVD player setup screen* Call out DVD menu Call out DVD changer setup screen* Switch page (function guide) Switch page (function guide) Move menu cursor Move menu cursor Enter (DVD menu) Enter (DVD menu) Move back 1 screen Move back 1 screen (DVD player setup)* (DVD changer setup)* Cue to start of chapter, track or Cue to start of chapter, track or Call out DVD top menu Call out DVD top menu elapsed time elapsed time Switch page (function guide) Switch page (function guide) * Stop mode only * Stop mode only

If a TV is operated (A TV tuner is connected)
Touch the option part of the display. The screen changes to the operation screen for each source. Touch CONTROL on the upper right side of the screen. Display the TV operation screen.

TV CONTROL

TV Operation Touch Channel down Channel up Auto memory Preset channel down Preset channel up Change band Long touch

A.MEMO

When connecting an IVA-D300 to the TME-M770, be sure to connect it to the AUX IN 1 connector and set the AUX IN MODE setting (SETUP) to LINK. When connecting a DVA-5210, DHA-S680 etc., to the TME-M770, set the AUX IN MODE setting (SETUP) to EXT.DVD. When connecting a TV tuner to the TME-M770, set the AUX IN MODE setting (SETUP) to TV. The TME-M770 and other components connected to it can be operated with a separately sold remote control unit. For instructions on operations using the remote control unit, see the remote control units operating instructions. When operating an IVA-D300, see the Rear Entertainment Function section of the IVA-D300s operating instructions. Depending on the connected component, some functions and operations may differ. Also refer to the operating instructions of the connected component.

In Case of Difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.
Navigation screen is not displayed or navigation systems remote controller keys do not work.
Navigation systems power is turned off. - Press the ON/OFF (POWER) button on the navigation systems remote controller to turn the navigation systems power on. * The fluorescent tube replacement is not free of charge even within the warranty period, for the tube is an article of consumption.

No function or display.

Car's ignition is off. - Turn the ignition on. No fuse or blown fuse. - Check the cause and replace the fuse. Incorrect connections. - Check connection and remedy. Vehicle's battery is weak. - Check the voltage of vehicle's battery.

Unclear picture display.

Fluorescent tube is exhausted. - Replace the fluorescent tube*.

No picture display.

Brightness control is set for minimum brightness control. - Adjust the brightness. Incorrect setting of the VCR mode. - Switch to the correct mode. Protective circuit is on because of high temperature. - Wait until the temperature inside the vehicle comes down to the operating temperature range (45C). Incorrect or open connection with the Monitor, AV interface unit. - Check the connection and remedy.

Picture color is poor.

Brightness/Color/Tint control are not set to the proper positions. - Check each control.

Spots or dotted lines/stripes appear.
Caused by neon signs, high-voltage power lines, CB transmitter, other vehicle's ignition plugs, etc. - Change the location of your vehicle.

Unit does not operate.

Monitor's power is not turned on. - Turn on the monitor's power.

Specifications

MONITOR
Screen Size Display System 6.5-type Low reflection rear projection type TN liquid crystal panel Drive System Active matrix drive, normally white display Number of Picture Elements 280,800 pcs. (H:1200 x V:234 dots) Effective Number of Picture Elements 99.99% or more Light Source Internal optical system (Utype cold cathode fluorescent tube) Dimensions (W x H x D) 161 x 109 x 28.5mm Weight 360g

AV Interface Unit

Dimensions (W x H x D) Weight 180 x 119 x 28.5 mm 550g
Due to continuous product improvement, specifications and design are subject to change without notice. The LCD panel is manufactured using an extremely high precision manufacturing technology. Its effective pixel ratio is over 99.99%. This means that there is a possibility that 0.01% of the pixels could be either always ON or OFF.
Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

Warning

MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product damage.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG.
If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.

Caution

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Precautions

Be sure to disconnect the cable from the () battery post before installing your TME-M770. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle's electrical system. When making connections to the cars electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the TME-M770 to the fuse box, make sure the fuse for the intended circuit of the TME-M770 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. The TME-M770 uses female RCA-type jacks for connection to other units having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the rear of the monitor or on the bottom of the AV interface unit.
SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE:

Installation

Installing AV Interface Unit
This Unit can be placed inside the trunk, on the kick panel of the front passenger's seat or underdash. However, to avoid unnecessary signal wiring, it is better to mount the Unit as close as possible to the Display. DO NOT MOUNT THE INTERFACE UNIT IN LOCATIONS EXPOSED TO MOISTURE OR EXTREME HEAT (such as the engine compartment). Velcro fastener Mounting: 1. Place a Velcro fastener onto the mounting surface. The rough side should be facing the unit. 2. Remove the backing to the adhesive on the Velcro strips. Press the unit onto the mounting location. Attaching with screws 1. Place the unit on the location chosen for installation. 2. Mark the screw locations using the unit as a template. 3. Drill a hole less than 3 mm in diameter.
When you are drilling a hole in the car body, be careful not to damage pipes, tanks or electrical wiring etc. It might cause an accident or a fire. 4. Firmly attach the unit using 4 of the supplied selftapping screws (M4 x 14).

Monitor lock release tool

Connections

Make connections correctly. Improper connections may cause a fire or operation failure.

Basic connection

1 w q e

i ; o 2 q

TOUCH PANEL WIDE LCD MONITOR

Battery

Chassis

d f g h j k

1 Foot brake lead (Yellow/Black) Connect this lead to the foot brake lead powered when the foot brake is pressed. 2 Hand brake lead (Yellow/Blue) Connect this lead to the hand brake lead powered when the hand brake is pulled. 3 Monitor control lead (White/Pink) Connect when upgrading with touch panel compatible products such as the IVA-D300. 45Remote control output lead (White/Brown) To remote control input lead of ALPINE products used in the system. 6 Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the cars reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the back-up camera. This is linked with putting the car into reverse (R). 7 ACC power lead (Red) To ACC power lead powered when engine key position is ACC. 8 Fuse (7.5A) 9 Ground lead (Black) Connect the lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. p q w e r t y u i o ; a s d Foot brake lamp Brake connector (Included) Foot brake lead Foot brake switch Hand (parking) brake lamp Hand (parking) brake lead Hand (parking) brake switch Headphone Main monitor Connection cable RGB cable To RGB output terminal Made by Alpine navigation Audio input connectors (AUX 1) Use these connectors to input the audio signals from a DVD player, video deck etc.
h Video input connectors (AUX 2) Use this connector to input the video signals from a DVD player, video deck etc. j Audio output connectors Use these connectors to output audio signals to a rear monitor, etc. k Video output connector Use this connector to output video signals to a rear monitor, etc.
When connecting to an IVA-D300 or VPE-S431, use the AUX IN 1 connector. When connecting a rear view camera, use the AUX IN 2.

To prevent external noise from entering the audio system. Locate the unit and route the leads at least 10cm away from the car harness. Keep the battery power leads as far away from other leads as possible. Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis. If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine noise suppressors, contact them for further information. Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
f Video input connector (AUX 1) Use this connector to input the video signals from a DVD player, video deck etc. g Audio input connectors (AUX 2) Use these connectors to input the audio signals from a DVD player, video deck etc.

System Connections

1) 2 main units + head unit (IVA-D300) + expansion box (VPE-S431) + DVD changer (DHAS680) + TV Tuner
To Ai-NET input connector

Ai-NET cable

Head unit (IVA-D300, sold separately)

To AV SELECTOR terminal

AV SELECTOR cable (supplied with VPE-S431)
To head unit terminal To AUX OUT 2 terminal RCA Extension cable
To audio output terminal RCA Extension cable
Ai-NET output connector (Black)
DVD changer (DHA-S680, sold separately)

To video output terminal

Remote control output lead (AUX1)
Remote control input lead (AUX2)

Monitor control 2 lead

Expansion box (VPE-S431, sold separately)

To AUX IN 1 terminal

RCA Extension cable (supplied with DVD changer )
To AUX IN 2 terminal RCA Extension cable

To audio output terminal

Rear monitor (TME-M770) B.BOX

To AUX OUT 1 terminal

TV Tuner or VCR (sold separately)

RCA Extension cable

Remote control output lead (AUX1) White/Brown Remote control output lead (AUX 2) White/Brown
Remote control input lead White/Brown Remote control input lead White/Brown

Rear monitor (TME-M770)

[WHAT IS NOT COVERED:

This Warranty does not cover the following: 1 Damage occurring during shipment of the product to Alpine for repair (claims must be presented to the carrier). 2 Damage caused by accident or abuse, including burned voice coils caused by over-driving the speaker (amplifier level is turned up and driven into distortion or clipping). Speaker mechanical failure (e.g. punctures, tears or rips). Cracked or damaged LCD panels. Dropped or damaged hard drives. 3 Damage caused by negligence, misuse, improper operation or failure to follow instructions contained in the Owner's manual. 4 Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature. Any cost or expense related to the removal or reinstallation of the product. 5 Service performed by an unauthorized person, company or association. 6 Any product which has the serial number defaced, altered or removed. 7 Any product which has been adjusted, altered or modified without Alpine's consent. 8 Any product not distributed by Alpine within the United States, Puerto Rico or Canada. 9 Any product not purchased from an Authorized Alpine Dealer.
[HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.

[IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center.
[HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges. 2 You should provide a detailed description of the problem(s) for which service is required.

 

Tags

F1422TD Nokia 1650 Netbook PRO NV-GS140 ESD 9200 1200-UB- Plus 42PC52 Amplifier Server Programmer CC-CD200 KX-TGA560M NV-MX300 Coche T4X Lynx-14 VX550 32HF5335D E-115 W7610 B-SA4TP MIO S500 RX-V340RDS EW280 MD111 EMP-8300 HTP-78DW TX-P37x10B Hwur54G AP2000 VS-880 P1222 LD220 Profile 633 128 Plus RL62vcts Spider DVD-9000 HT32744 Seville 2001 DG 6145 NX7400 KLV-40J400A Speakers Z33 WP Hwnri-300 DG-1000 Nikon 3700 LE40B653 Roland R-70 HT-Q20 DTH-8560 Amplifier HS-36W Depth 2100 V66LT Samsung G810 TM-H6000 III SE 2001 Yeti SE SGH-X560 FX-115D MI-sport 500 KDL-40XBR3 CT-W703RS CCD-TRV10E RSX-1550 PD-F805 Mania Itrip Omron CJ1M Motorola V3C UT37-XP770B NBG-460N XP500-2005 Review Gr-d295 MS9138E DSP2024P Telefonica Domo WF8590NMW8 Assist 7827 GR-D230us-gr-d230 Serpents Photo 1200 Caribbean Uk Sendo X ER-508 2028-307A 23PF9966 2 0 LT-P326W XR-C5600X FCV-1100L DVC-1000 CLX-2160N-SEE BX 1 70FC920 AVR-485S Dvdr890 021 ML3320

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101