In-Dash Changer/MD Player/Receiver/Sound Field Processor
FEATURES Tuner MaxTune Tuner DAP (Direct Access Preset) Auto Memory Up/Down Seek Signal Level Indicator Tuner Recall Local/DX Selection Stereo/Mono Selection Preset Address Indicator Station Title Memory/Search In-Dash Changer Regulated 1-Bit DAC Elapsed Time Display Disc Title Memory 8x Oversampling Digital De-emphasis Music Sensor (Skip) Music Scan MIX (Random Play) Repeat (One/All) Direct Disc Selection MD Player Regulated 1-Bit DAC Forward/Backward MIX (Random Play) Programmable Music Sensor Repeat Music Scan Disc Title Scroll Music Title Scroll CD Shuttle Control Elapsed Time Display Music Sensor (Skip) Music Scan MIX (Random Play) MIX All (Random Play All) Repeat (One/All) Direct Disc Selection Disc Title Memory/Search General 40W x 4 High Power Amplifier DHE (Digital Harmonics Enhancer) 5-Mode DSP Surround 7-Band Graphic EQ Large, Cool White, 4-Color Display with 15-Band Spectrum Analyzer ISO Mount Capability Gold-Plated RCA Jacks 3 PreOuts Selectable Fader Preamp Fader Subwoofer Level Control Title Search Menu Audio Interrupt In Sound Guide Operation Indicator Clock Demo Function Wireless Remote Control Included

VOLUME MUTE

MDA-W890

COMPACT DISC CHANGER

ACTION

OPEN/CLOSE

SUBWOOFER LEVEL CONTROL

T.S.M.

MD / IN-DASH CD CHANGER / DSP RECEIVER MDA-W890

CD-CHG

BAND PROG

SOURCE

A.PROC

D.A.P.

REMOTE CONTROL UNIT

RUE-4185

3 SCROLL 9 TUNE 5 11

400 1K 2.5K 6.3K 16K

M.I.X. ALL RPT ALL SCAN A.ME

SUB W.

USER P.SET

MANU / DISC

EQ / SUR / L.P.S. ADJUSTMENT

5 D.H.E.

SEEK / TRACK

F PR M N EQ

L DC S H SUR
DIGITAL HARMONICS ENHANCER

40w x 4

SUR L.P.S. DISP

TITLE CLK

D.H.E.
SPECIFICATIONS FM Tuner Tuning Range... 87.7107.9 MHz Mono Usable Sensitivity... 9.3dBf (0.8V/75 ohms) 50dB Quieting Sensitivity.. 13.5dBf (1.3V/75 ohms) Alternate Channel Selectivity... 80dB Signal-to-Noise (S/N)... 65dB Stereo Separation... 35dB Capture Ratio... 2.0dB AM Tuner Tuning Range... 5301,710kHz Usable Sensitivity (IEC Standard)... 22.5V/27.0dB CD Player Oversampling.... 8X Sampling Rate... 352.8kHz DAC Resolution.... 1-Bit Number of DACs.... 2 Frequency Response... 5Hz20kHz (1dB) Wow & Flutter (%WRMS).. Below measureable limits Total Harmonic Distortion (THD)... 0.008% (at 1kHz) Dynamic Range.... 95dB (at 1kHz) Signal-to-Noise (S/N)... 95dBA Channel Separation... 85dB (at 1kHz) Mini Disc Player Frequency Response... 20Hz20kHz (0.5dB) Wow & Flutter (%WRMS).. Below measureable limits Total Harmonic Distortion (THD)... 0.008% (at 1kHz) Dynamic Range.... 90dB (at 1kHz) Signal-to-Noise (S/N)... 90dBA Channel Separation... 85dB (at 1kHz) Equalizer Number of Bands... 7 Equalizer Center Frequency Control. (63/160/400Hz/1/2.5/6.3/16kHz) Equalizer Boost/Cut Range... 10dB Remote Control Battery.... 2 "AAA" Dimensions (W x H x D). 56mm x 14mm x 105mm (2-1/4"x9/16"x4-1/8") General Maximum Power Output (Note 1).. 40 watts x 4 Continous Power Output (Note 2).. 19 watts x 4 Pre Output Voltage (Before Clipping).. 2 volts Operating Temperature.. 60C (140F) to -10C (14F) Power Requirement.. 1116 volts DC (Negative Ground) Maximum Mounting Angle... 30 of Horizontal Chassis Size (W x H x D). 178mm x 100mm x 156mm (7"x3-15/16"x6-1/8") Nose Piece Size (W x H x D).. 170mm x 96 mm x 19mm (6-3/4"x3-3/4"x3/4") Weight....3kg(6lbs. 9 oz)

Note 1: Under maximum operating voltage and input signal, into 4 ohm loads. Note 2: Per EIA-517 standard,40Hz to 20kHz, 0.8% THD, with 14.4 volt DC supply
Specifications and design are subject to change without notice
Four Speaker Hook-Up Violet Violet/Black Grey/Black Grey Green Green/Black White/Black White Right Rear Speaker Output Lead (+) Right Rear Speaker Output Lead (-) Right Front Speaker Output Lead (-) Right Front Speaker Output Lead (+) Left Rear Speaker Output Lead (+) Left Rear Speaker Output Lead (-) Left Front Speaker Output Lead (-) Left Front Speaker Output Lead (+) Left Speaker Output Lead (-) Left Speaker Output Lead (+) Two Speaker Hook-Up Right Speaker Output Lead (-) Right Speaker Output Lead (+)
Remote Turn-On (Blue/White - +12V Output 300mA Max.) Power Antenna Lead (Blue - +12V Output 300mA Max.) Audio Mute (Pink/Black-Ground to Activate) Illumination (Orange - +12V to Activate) Ground Lead (Black) Ignition Lead (Red) Battery Lead (Yellow)

A Power & Speaker

Fuse Holder (10A)
Output Connector Pin Configuration
Ground (Black) Front Left (-) Output (White/Blk) Front Left (+) Output (White) Front Right (-) Output (Gry/Blk) Front Right (+) Output (Grey) Illumination (-) Input (Orange) Audio Mute (-) Input (Pink/Black) Ignition (Red)

Battery (Yellow)

10 Rear Left (-) Output (Green/Black) 11 Rear Left (+) Output (Green) 12 Rear Right (-) Output (Violet/Black) 13 Rear Right (+) Output (Violet) 14 Open 15 Remote-On (Blue/White) 16 Power Antenna (Blue)

Wire Harness 01T75469W13

Antenna Receptacle Red (Right) RCA Extension (Optional)

CH-1 (L)

Subwoofer Output

BRIDGED

BATTERY

REMOTE

CH-2 (R) (R)

SPEAKER OUTPUT

POWER SUPPLY
White (Left) Rear Output Red (Right) RCA Extension (Optional)
2 CH Amplifier (Optional)
White (Left) Front Output Red (Right) RCA Extension (Optional)

CH-1 (L) CH-2 (R)

White (Left)
2 CH Amplifier (Optional) Ai-NET CD Shuttle (Optional)
5.5m Ai-Net Extension Cable (included with Changer)
Signal Ground Left Signal Battery Power Supply Ground

B Ai-NET Connector

Accessory Ground Bus Data Bus Right Signal
B Ai-NET Female Connector

CD Shuttle DIN Connector

MDA-W890 Radio Rear Connector View
1. Ground 2. Front Left 3. Front Left + 4. Front Right 5. Front Right + 6. Dimmer 7. Audio Mute 8. Ignition Acc
9. Battery 10. Rear Left 11. Rear Left + 12. Rear Right 13. Rear Right + 14. Open 15. Remote-On 16. Power Antenna

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE () BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts.
DO NOT CUT AWAY THE WIRE SHEATH AND USE POWER FOR OTHER EQUIPMENT. Doing so may exceed the current carrying capacity of the wire and result in fire or electric shock. DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION OR CREATE HAZARDS FOR VEHICLE OCCUPANTS. Doing so may obstruct forward vision or hamper movement. DO NOT CONTACT, DAMAGE OR OBSTRUCT PIPES, FLUID LINES OR WIRING WHEN DRILLING HOLES. Failure to take such precautions may result in fire or cause an accident or injuries. DO NOT USE NUTS OR BOLTS IN THE BRAKE SYSTEM WHEN MAKING INSTALLATION OR GROUND CONNECTIONS. Never use safety-related parts such as bolts or nuts in the steering or brake systems or tanks to make wiring installations or ground connections. Using such parts could disable control of the vehicle and cause brake failure, other accident or injury.
MAKE THE CORRECT CONNECTIONS. Failure to do so may cause fire or accident to occur. ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED. Route the cables and wiring so as not to be crimped by moving parts or make contact with sharp or pointed spots which might damage the wiring. Failure to do so may cause failure of unit or vehicle.
EFECTUE LAS CONEXIONES CORRECTAMENTE. En caso contrario, podr ocurrir un incendio o accidente. DISPONGA EL CABLEADO DE MANERA QUE NO SEA AGUJEREADO O DOBLADO. Encamine los cables y los hilos de manera que no sean agujereados por piezas mviles o que no entren en contacto con puntos cortantes o afilados que pueden daar el cableado. En caso contrario, podr ocasionar un fallo en la unidad o en el vehculo. CONFIE EL CABLEADO Y LA INSTALACION A PROFESIONALES. El cableado y la instalacin de este aparato necesitan una competencia y experiencia tcnica confirmada. Para garantizar la seguridad, contacte siempre el distribuidor al que ha comprado el aparato para confiarle los trabajos a realizar.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this unit to have the work done.
DO NOT BLOCK VENTS OR RADIATOR PANELS. Blocking them may cause heat to build up inside and may result in fire. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Use of other than designated parts may damage this unit internally or may not securely install the unit in place as parts that come loose may create hazards.
NE PAS OBSTRUER LES SORTIES D'AIR NI LES PANNEAUX DU RADIATEUR. Une surchauffe interne peut se produire et provoquer un incendie. UTILISER LES ACCESSOIRES SPECIFIES ET LES INSTALLER CORRECTEMENT. L'utilisation d'autres pices non dsignes risque de provoquer des dommages l'intrieur de l'appareil ou son installation risque de ne pas tre faite correctement, car les pices desserres peuvent provoquer des dangers. NE PAS INSTALLER DANS DES ENDROITS TRES HUMIDES OU POUSSIEREUX. Une humidit ou poussire importante pntrant dans l'appareil peut tre l'origine d'un dgagement de fume ou d'un incendie.

NO BLOQUEE LOS ORIFICIOS DE VENTILACION O LOS PANELES DES RADIADOR. Si los bloquea el calor se acumular en el interior y podra producise un incendio. UTILICE LOS ACCESORIOS ESPECIFICADOS E INSTALELOS CORRECTAMENTE. La utilizacin de otras piezas no designadas puede provocar daos en el interior del aparato o puede hacer que la instalacin no se efecte correctamente, ya que las piezas flojas pueden ser peligrosas. NO INSTALE EN LUGARES MUY HUMEDOS O LLENOS DE POLVO. Un alto grado de humedad o polvo dentro del aparato podr ocasionar la aparicin de humo o un incendio.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. A high incidence of moisture or dust that penetrates into this unit may cause smoke or fire.

Precautions

IMPORTANT
Please record the serial number of your unit in the space provided on the back cover of Owner's Manual and keep it as a permanent record. The serial number plate is located on the bottom of the unit. Be sure to disconnect the cable from the () battery post before installing your MDA-W750. This will reduce any chance of damage to the unit in case of a short-circuit. When replacing a blown fuse, make sure to replace it with one of the same value. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle's electrical system. This unit is designed for 12 VDC, negative ground systems. Make sure your vehicle has this type of electrical system before connecting the power cable. When making connections to the car's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the MDA-W750 to the fuse box, make sure the fuse for the intended circuit of the MDA-W750 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. The MDA-W750 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

Prcautions

Enregistrer le numro de srie de l'appareil dans l'espace prvu au dos du mode d'emploi et le conserver en permanence. La plaque de numro de srie est situe au fond de l'appareil. S'assurer de dconnecter le cble du ple () de la batterie avant l'installation du MDA-W750. Ceci rduit les risques d'endommager l'unit en cas de court-circuit. Lors du remplacement d'un fusible grill, s'assurer de le remplacer par un fusible de mme valeur. S'assurer de connecter les conducteurs cods en couleur se conformant au schma. Des connexions incorrectes peuvent occasionner le mauvais fonctionnement de l'unit ou le dgt du systme lectrique du vhicule. Cette unit a t conue pour des systmes de 12V CC ngatifs la masse. S'assurer que le vhicule a ce type de systme lectrique avant de connecter le cble d'alimentation. Lors de la connexion des cbles au systme lectrique du vhicule, il faut tre conscient des composants installs en usine (tel qu'un ordinateur de bord). S'assurer de ne pas brancher ces conducteurs pour fournir l'alimentation cette unit. Lors de la connexion du MDA-W750 au botier fusible, s'assurer que le fusible du circuit dsign pour le MDA-W750 a l'amprage appropri. Sinon, l'unit et/ou le vhicule peuvent tre endommags. En cas de doute, consulter le revendeur ALPINE. Le MDA-W750 utilise des prises femelles de type RCA pour la connexion d'autres units (par exemple un amplificateur) quipes de connecteurs RCA. Un adaptateur peut tre ncessaire pour le connecter d'autres units. Si c'est le cas, contacter le revendeur agr ALPINE pour obtenir de l'assistance technique.