Voice Navigation System

ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-Ratingen, Germany Tel.: 02102-ALPINE ITALIA S.p.A. Via C. Colombo 8, 20090 Trezzano Sul Naviglio MI, Italy Tel.: 02-81 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 280) 98, Rue De La Belle Etoile, Z.I. Paris Nord Il B.P. 50016 F-95945, Roissy, Charles De Gaulle Cedex, France Tel.: 01-ALPINE ELECTRONICS OF U.K., LTD. 13 Tanners Drive, Blakelands, Milton Keynes MK14 5BU, U.K. Tel.: 01908-56 ALPINE ELECTRONICS DE ESPAA, S.A. Portal De Gamarra 36, Pabelln Vitoria (Alava)-Apdo. 133, Spain Tel.: 34-45-283588 Yamagata Printing Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan Designed by ALPINE Japan Printed in Japan (Y) 68P30540Y43-O

NVE-N077P

OWNER'S MANUAL
Please read before using this equipment.
Auto Route Calculation Destination Search Real Time Voice Guidance

MODE D'EMPLOI

Veuillez lire ce mode d'emploi avant la mise en service de l'appareil.
Calcul automatique d'itinraire Recherche de destination Guide vocal en temps rel

MANUAL DE INSTRUCCIONES

Lea este manual antes de utilizar este equipo.
Clculo automtico de ruta Bsqueda de destino Gua de voz en tiempo real

BEDIENUNGSANLEITUNG

Bitte lesen Sie diese Bedienungsanleitung vor Gebrauch Ihres Navigationssytems durch.
Automatische Streckenermittlung Zielort-Suche Echtzeit-Sprachfhrung

ISTRUZIONI PER L'USO

Leggere questo manuale prima di usare l'apparecchio.
Calcolo automatico del percorso Ricerca della destinazione Guida a voce in tempo reale

GEBRUIKSAANWIJZING

Lees de gebruiksaanwijzing zorgvuldig door alvorens u het apparaat in gebruik neemt.
Automatisch uitstippelen van de route Zoeken van uw bestemming Gesproken instructies terwijl u rijdt

RETURN

DUAL LAYER DVD HIGH SPEED ROUTE GUIDANCE COMMUNICATION PORT
GPS CAR NAVIGATION SYSTEM PUSH OPEN

LO.PT.

Precautions

English

PRECAUTIONS
IMPORTANT INFORMATION, PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT.
This product is intended to safely provide turn by turn instruction to get you to a desired destination. Please read the following precautions to ensure that you use this navigation system correctly.
H This product is not a substitute for your personal judgment. Any route suggestions made by this navigation system may never supersede any local traffic regulations or your personal judgment and/or knowledge of safe driving practices. Do not follow route suggestions if the navigation system instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or routes you into an area which you consider unsafe. H Glance at the screen only when necessary and safe to do so. If prolonged viewing of the screen is necessary, stop in a safe and legal manner and location. H Do not input destinations, change settings, or access any functions requiring a prolonged view of the monitor and/or remote control while you are driving. Stop in a safe and legal manner and location before attempting to access the system. H Do not use the navigation system to route you to emergency services. Not all locations of emergency service providers such as police and fire stations, hospitals, and clinics are contained in the database. Please use your own judgment and your ability to ask for directions in these situations. H The map database contained within the media (DVD ROM) in which it is stored is the most recent map data available at the time of production. Because of changes in streets and neighborhoods, there may be situations where the navigation system may not be able to route you to your desired destination. In these cases, use your own personal judgment. H The map database is designed to provide you with route suggestions, it does not take account of the relative safety of a suggested route, or of factors which may affect the time required to reach your destination. The system does not reflect road closures or construction, road characteristics (i.e. type of road surface, slope or grade, weight or height restrictions, etc.), traffic congestion, weather conditions, or any other factors which may affect the safety or timing of your driving experience. Use your personal judgment if the navigation system is unable to provide you with an alter2 nate route.

H There may be situations where the navigation system may display the vehicles location erroneously. Use your own driving judgment in this situation, taking into account current driving conditions. Please be aware that in this situation, the navigation system should correct the vehicles position automatically; however, there may be times where you may have to correct the position yourself. If this is the case, stop in a safe and legal manner and location before attempting operation. H Make certain that the volume level of the monitor is set to a level which still allows you to hear outside traffic and emergency vehicles. Driving while unable to hear outside sounds could cause an accident. H Position the monitor so that glancing at the screen can be performed quickly and easily by the driver. If any adjustments are necessary, stop in a safe and legal manner and location. H The monitor used with this system should not be placed in a location which hinders the drivers view of any critical elements necessary to operate the vehicle properly (i.e. the road, mirrors, instruments, vehicles surroundings). In addition, the monitor should not be placed in a location which may obstruct the air bags should they deploy. H Remember to wear your seat belt at all times when the car is in motion. This will help you avoid impact with anything in the cars interior, including the system itself. H Please make certain that any other person who intends on using this navigation system reads these precautions and the following instructions carefully. H If there is anything in the manual which you do not understand, or are uncertain about the operation of the navigation system, please contact an authorized representative before using the navigation system.
Points to Observe for Safe Usage
a Read this manual carefully before starting operation and use this system safely. Alpine cannot be responsible for problems resulting from failure to observe the instructions in this manual. a This manual uses various pictorial displays to show how to use this product safely and to alert you to potential dangers resulting from improper connections and operation. Following are the meanings of these pictorial displays. It is important to fully understand the meanings of these pictorial displays in order to use this manual and the system properly.

MENU button

Displays the menu screen. (See Tips.)

VOIC E

VOICE button
Press this button for voice guidance. (Real time voice guidance)

LO.PT. ZOOM

DEST (Destination) button
Displays street name inputting screen.

ROUTE button

Pressing this button searches for the route again and switches between motorway preference and ordinary road preference for route searching.

7 BS 9 OK

POWER On button
Turns the pictorial display on.

Power OFF button

Turns the pictorial display off.
a Be sure to apply the parking brake before starting the menu operation, otherwise the menu operation cannot be performed. a If an operation is not accepted, the navigation system beeps. a For more information on remote control handling, see Remote Control Precautions on page 13. a Adjust the volume with the control on display monitor, etc.

BS button

Deletes the character previously input.

Numeric Keypad

Use these buttons to enter phone numbers, address numbers or street names containing numbers (i.e., 42nd St.). Please refer to the OWNERS MANUAL (included with DVD-ROM) for software operating instructions.

Transmitting indicator

Blinks while the remote control signals are transmitted.
Stickers are provided with the remote control to be used by the people who speak one of the five other languages than English. To use these stickers, please see the portion for the desired language.

Joystick

Tilt this to select items from menus and moves the map in eight directions.

RETURN button

Returns the navigation system to the previous searching.

button

Press to switch between the map and guide (with arrow) modes.

POS. (Position) button

Returns to the current position of your vehicle or displays the latitude/longitude. When this button is kept pressed, the screen display changes as follows: North-up Heading-up

ZOOM buttons (5, 6) 5

Change the map magnification ratio upward or downward in 13 steps (400 km, 200 km, 100 km, 50 km, 25 km, 12 km, 6.4 km, 3.2 km, 1.6 km, 800 m, 400 m, 200 m, 100 m)
LO.PT. (Local Point) button
Pressing this button displays the current position of the vehicle or local interest points in the vicinity. When this button is pressed, the selection menu for the displayed local points will appear in the display.

OK button

Executes numeral inputtings and starts searching.

Main unit

DVD-ROM compartment door a Keep the door closed except when changing the DVD-ROM. a Before inserting or removing the DVDROM, always turn the ignition key to ACC or ON. You cannot remove or Tips insert the DVD-ROM with the ignition key turned OFF. a Do not insert any DVD Video discs or map DVD-ROM.

Inserting the DVD-ROM

Removing the DVD-ROM
Press the door in gently then slide it downwards.
Press the door in gently then slide it downwards. The DVD-ROM is automatically ejected part way.
If the DVD-ROM is not removed, it is automatically drawn back into the player after a while.
Caution Never close the door while the DVD-ROM is being unloaded. Doing so could scratch the DVDROM or damage the player.
If a DVD-ROM is already in the main unit, the DVD-ROM is automatically ejected part way.
Insert the DVD-ROM with the label side facing up.
When you insert the DVD-ROM into a certain position, it is automatically pulled into the navigation system.
Do not touch the surface of the disc directly with your fingers.

Close the door.

Be sure to close the door to prevent dust from getting inside.
a The DVD-ROM is a delicate device. Avoid dropping or scratching it. a Keep the DVD-ROM away from dust and moisture.
Precautions for the remote control
a This device is lightweight and compact. Do not drop it or bump it. Do not put it in your trousers pocket. Doing so could break it, speed up battery wear, or cause malfunction. a To clean this device, wipe it off with a dry cloth. (If it is extremely dirty, wipe it off with a damp cloth that has been carefully wrung out.) Never use benzene, paint thinner or harsh chemicals. They cause deterioration of the case and paint. Do not leave this remote control on the dashboard or anywhere else subject to direct sunlight.

Replacing the batteries

Use two AA-type batteries.

Open the cover

Replace the batteries

Close the cover

Before Using this System
Opening the battery cover. Push on the cover and slide it as indicated by the arrows then the cover will be removed.
Replacing the battery. Remove the old batteries. Insert new ones matching the (+) and () polarities as shown in the diagram inside the remote control.
Closing the cover. Push the cover in the arrow direction until a click is heard.
Remote Control Holder Installation
If direct sunlight reaches the remote control mounted on the holder, remove the remote control from the holder and put it in the glove compartment. If double-sided adhesive tape cannot install the holder securely, use screws. Note: Attach the blue protective paper side of double-sided tape onto the console box, etc.

Reinforcing Screws Remote Control Remote Control Holder Double-Sided Adhesive Tape (Before attaching the tape, remove dust from the surface of attaching place.)
Blue Protective Paper Console Box etc.
Switching the display on/off
With this system, when the display monitor is set in the navigation display mode or external input display mode and the ignition key is turned to the ACC or ON positions, the opening screen will automatically appear.
When the system is used for the first time, the language selection menu is displayed. Select (highlight) the desired language by tilting the joystick. Then press the ENTER button.
Note: For English, you can select the distance indications in either M (Mile) or km (Kilometre). For other languages, only kilometer is used for the distance indications.
The opening screen is displayed. After the opening screen is displayed, important information saying "Please be sure to read this!" is displayed. Be sure to read it.
After you have read this important information, press the ENTER button.
The map screen is displayed.
With the map displayed, press the OFF button to turn off the monitor.
If you press the POWER button, the opening screen is displayed.
a If there is no disc in the navigation system, "Please insert map DVD ROM" is displayed. For details on how to load the disc, see "Inserting the DVD-ROM" and "Removing the DVD-ROM" on page 12. a If the disc cannot be read, the "DVD ROM unreadable. Please check DVD ROM" message is displayed. Try reloading the disk and if the problem cannot be cured, return to an authorized Alpine dealer. a If the monitor is kept on with the engine off for an extended period of time, the vehicles battery may discharge. a Operation varies depending upon the disc version in use. For details, refer to the manual for the DVD ROM.

In case of difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Symptom

Blown fuse Ambient temperature over 50C

Solution

Replace with a fuse of the prescribed rating. Lower the temperature in the vehicle below 50C, for example by running for a while with the window open or by using the air conditioner. Allow enough time for the condensation to evaporate (about 1 hour). Drive for a while with GPS signal reception.

No operation

Moisture condensation The present car position cannot be measured correctly. The car position changed after the ignition was switched off. Movement on a ferry boat Rotation of a parking lot turntable Movement by tow truck Poor satellite configuration Measurement is 2 dimensional. The navigation screen is off. The disc is dirty. The pickup lens is dirty. The remote control batteries are wearing out.
The measurement error is too large. Screen not displayed Cannot read disc is displayed for a certain operation. Unstable operation
Move to a location where GPS satellite reception is easy. (See page 9.)
Press the POWER button on the remote control. Clean the disc. Have the pickup lens cleaned periodically. Replace the remote control batteries. (See page 13.)

If this message appears

Various messages are displayed on the screen during operation. In addition to the messages telling you the current status or providing guidance for the next operation, there are also the following error messages. If one of these error messages is displayed, carefully follow the instructions in the solution column.
Message Please insert map DVD ROM. Cause The disc has been removed. There was no disc in the system when the power was switched on. A disc that this system cannot read has been loaded. The disc is dirty or upside down. The disc cannot be read because of condensation. DVD ROM being checked. A disc was just inserted Vibration or the like made it impossible to read the disc. The MENU button was pressed while the vehicle was running. A menu selection operation was carried out while the vehicle was running. Solution Insert the disc (sold separately).
DVD ROM unreadable. Please check DVD ROM.
Insert the map disc (sold separately). Take out the disc, check if it was upside down, clean it if necessary, then reinsert it. Take out the disc, allow enough time for the condensation to evaporate (about 1 hour), then re-insert the disc. When the disc check is complete, the following screen is displayed automatically. Move the vehicle to a safe location, stop, and engage the parking brake, then carry out this operation.

Do not operate while driving. Stop the car, then use this operation.

Specifications

Power requirement Operating temperature (main unit) Aerial type Reception frequency Reception sensitivity Reception method External dimensions Weight 14.4 VDC (V allowable) negative ground +14F to +122F (10C to +50C) Micro-strip planar aerial 1575.421 MHz 130 dB max. Parallel 8 channels 73/4 (196) 2 (50) 79/16" (191.5 mm) Navigation unit (W H D) Remote controller (W H D) 13/4 (45) 13/4 (45) 51/4" (135 mm) 3 lbs. 12 oz (1.7 kg) Navigation unit 2.5 oz (0.07 kg) Remote controller

Accessories

Product Installation parts Aerial Remote control Batteries (AA) Q'ty 1 set 1 set 1 set 2 Product Power connector 13-P RGB extension cable Owner's manual, audiopass, etc. Q'ty 1 set
ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-Ratingen, Germany Tel.: 02102-ALPINE ITALIA S.p.A. Via C. Colombo 8, 20090 Trezzano Sul Naviglio MI, Italy Tel.: 02-81 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 280) 98, Rue De La Belle Etoile, Z.I. Paris Nord Il B.P. 50016 F-95945, Roissy, Charles De Gaulle Cedex, France Tel.: 01-ALPINE ELECTRONICS OF U.K., LTD. 13 Tanners Drive, Blakelands, Milton Keynes MK14 5BU, U.K. Tel.: 01908-56 ALPINE ELECTRONICS DE ESPAA, S.A. Portal De Gamarra 36, Pabelln Vitoria (Alava)-Apdo. 133, Spain Tel.: 34-45-283588 Designed by ALPINE Japan Printed in Japan (Y) 68P30540Y46-O
Guide for Installation and Connections Guide dinstallation et de connexion Gua de instalacin y conexiones Installations- und Anschluanleitung Guida allinstallazione e al collegamento Handleiding voor installatie en aansluiting
English Franais Espaol Deutsch Italiano Nederlands
Yamagata Printing Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan
s GUIIDE FOR INSTALLATION AND CONNECTIONS FOR AUTHORIZED ALPINE DEALERS Please read this GUIDE FOR INSTALLATION AND CONNECTIONS FOR AUTHORIZED ALPINE DEALERS and the OWNERS MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new NVE-N077P will give you many years of enjoyment. In case of problems when installing your unit, please contact your authorized ALPINE dealer. BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts. DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous. DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock. DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident. DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc. DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG. If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.

For safe operation of this system, please read this manual carefully. We cannot be responsible for problems resulting from failure to observe the instructions in this manual. Pictorial displays are used to point out safety tips to prevent harm to yourself or others and property damage. Here is what these pictorial displays mean. Knowing them is important to understand this manual. Meaning of displays This symbol means important Warning instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them Caution can result in injury or material property damage.
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure. DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions IMPORTANT

Please record the serial number of your unit in the space provided on the back cover of Owners Manual and keep it as a permanent record. The serial number plate is located on the bottom of the unit. For installation of the main unit, avoid areas with a high incidence of dust or moisture. Installing the unit in such locations may result in contamination of the DVD ROM making it unreadable. Do not install the navigation system near a CD player that may interfere with GPS signal reception. The optimum locations for instaling the GPS aerial are: on the dashboard where no metal piece (such as the defogger wire or aerial wire) is located on the windshield. where no metal cover is located. Route the Speed Pulse Sensor cable away from the audio cables in order to avoid picking up noises.

2. Connections

Disconnect the battery () terminal.
Note: Some vehicles contain a vehicle control computer etc. in this case, contents of the computer memory may be erased when the battery () lead is disconnected.
Cut terminal leads as required, and attach the solderless connectors to the leads.
Note: For leads which need branching to the speed sensor, dimmer, parking brake, etc., use the solderless connectors.

Preparation

Navigation side lead
Solderless connector (supplied with the unit) Vehicle lead
Navigation side lead Stopper

How to Connect

3-1. NVE-N077P Wiring Diagram With TME-M750
Battery Lead (Yellow) (5A) BATTERY Acc (Ignition) To the Acc power lead (5A)
Ground (Black) Connect to a metal part of chassis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line
WIDE COLOR LCD MONITOR TME-M750
Parking Brake (Yellow/Blue) To the parking brake signal line Reverse (+) (Orange/White) To reverse lights (+12V signal) Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V 3V)
To the vehicle speed pulse line

VOLUME DN UP

SELECT
Mute(Pink/Skyblue) Use this to connect a device having the IN-INT function () output for Audio Mute

GPS Aerial (Included)

POWER SUPPLY

AUX INPUT 1

DISPLAY OUTPUT

TME-M750

AUX INPUT 2

MOBILE COLOR MONITOR

TV TUNER INPUT

NAVIGATION INPUT

PHONE OUTPUT
Power Connector Pin Configuration
5 13P RGB Extension Cable Included 8 9
Ground (Black) Acc (Ignition) (Red) Mute (Pink/Sky blue) Open Open Battery (Yellow) Dimmer In (Illumination) (White/Blue) Speed Sensor (Green/White) Parking Brake (Yellow/Blue)
10 Reverse (Orange/White)

MIC/SW

TO DISP.

POWER GPS ANT.

System expansion ports
* Improper connection of the speed pulse line may cause important safety features of the vehicle to fail (such as the brakes or air bags). Such failures may result in an accident and loss of life. We strongly recommend that the installation be performed by a trained, authorized Alpine dealer.
3-2. NVE-N077P Wiring Diagram With IVA-C800R/IVA-M700R/CVA-1005R

FM ANNTENA

R AUDIO L (MONO) AUX OUTPUT
13P RGB Extension Cable Included

AUX2 Ai-NET R

AUX1 R AUDIO L (MONO) AUX OUTPUT VIDEO REMOTE OUT L FRONT REAR AUDIO SUB W. POWER SUPPLY
MOBIL MEDIA STATION 45WX4 IVA-C800R

IVA-C800R

3-3. NVE-N077P Wiring Diagram With CVA-1000R
Blue (Modulator Control) White/Brown (Remote Output) White/Green (Guide Control Input) Yellow/Red (Display Control Input) Yellow/Blue (Parking Brake Input)

Not Connected

(White/Brown) (White/Brown) (5A)

Battery Lead (Yellow)

BATTERY (White/Green) (White/Green) (5A) (Yellow/Red) (Yellow/Red) Ground (Black) Connect to a metal part of chassis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line Acc (Ignition) To the Acc power lead
Extension Cables Included

White/Blue (Dimmer)

Red (Ignition)

Yellow (Battery)

Black (Ground)

TFT COLOR LCD

SYSTEM CONTROL MONITOR / RECEIVER 35Wx4 CVA-1000R
VOLUME V.SEL SET UP SOURCE FUNC MUTE

POWER SUPPLY Ai-NET

VIDEO OUTPUT
SYSTEM CONTROL MONITOR / RECEIVER CVA-1000R

(Yellow)

(Yellow) 1 Ground (Black) Acc (Ignition) (Red) Mute (Pink/Sky blue) Open Open Battery (Yellow) Dimmer In (Illumination) (White/Blue) Speed Sensor (Green/White) Parking Brake (Yellow/Blue) Reverse (Orange/White) 2

CVA-1000R

(White)
Optional KCE-030N RCA to 13-Pin DIN Adaptor
3-4. NVE-N077P Wiring Diagram With TME-M006SP/TME-M005P
Yellow/Red (Display Control Input) White/Brown (Remote Control Output) Yellow/Blue (Parking Brake Input) (Yellow/Red)

(White/Green)

(5A) BATTERY Acc (Ignition) To the Acc power lead (5A)

(Yellow/Red)

(White/Brown)
(White/Brown) Ground (Black) Connect to a metal part of chassis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line
White/Blue (Dimmer Input)
Parking Brake (Yellow/Blue) To the parking brake signal line Reverse (+) (Orange/White) To reverse lights (+12V signal)
Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V 3V)

LCD COLOR MONITOR

TME-M006SP
POWER SUPPLY DISPLAY OUTPUT

ATTENUATOR HIGH

LOW NAVIGATION IN

AUDIO AUX IN VIDEO COLOR

L AUDIO R

BRIGHT

TME-M006SP/TME-M005P
(White) (Yellow) (White) (Yellow)

9 Optional KCE-030N RCA to 13-Pin DIN Adaptor
Connect the power lead to this unit.
Insert until a click sound is heard.
Wrap electrical tape around end of leads not used.
Connect the battery () terminal and turn the ignition key to the ACC or ON position. Check to see if operation can be performed properly.
(Is the power turned on? Is the illumination turned on?) You can check the language selection menu with the monitor. (Refer to the Owners Manual for details.) Go to step 7 after checking is completed.
Turn the ignition key to the OFF position to turn off the power after completion of the check.
Pull out the ignition key and remove the battery terminal () again to begin installation procedure.

3. Mounting

Note: The main unit must be mounted within 5 degrees of the horizontal plane, left to right, and 30 degrees of the horizontal plane, back to front. Less than 30
a When mounting using Velcro fastener

Place Velcro fasteners.

Place two pieces of Velcro fasteners onto the mounting surface. The rough side should be facing the navigation unit.
Press the Navigation unit onto the Velcro fastener at the mounting position.
Remove the backing to the adhesive on the Velcro strips. Press the Navigation unit onto the mounting location. Continued to 5 Securing leads, etc. Velcro fasteners Floor
a When mounting on the rear tray
Mount the brackets 1 on the unit.
Mount the brackets at both sides of the unit with screws with double washer (M58) 3.
Depending on the locations of the mounting screw holes, the mounting brackets (for the left and right) can be used on either side.

(Bottom side)

Attach the unit on the rear tray.
Attach the unit securely with hex bolts (M650) 4, flanged hex nuts (M6) 7, spring washers (M6) 6, and wing nuts (M6) 8. Continued to 5 Securing leads, etc.
a When mounting the unit directly on the floor
Mount the unit on the floor.
Mount the unit on the floor with flanged self-tapping screws (M515) 5 and spring washers (M6) 6. Warning: Do not damage pipe or wiring when drilling holes. Continued to 5 Securing leads. etc.
a When mounting with floor base brackets

Mount the brackets 1.

Mount the brackets 1 at both sides of the unit with screws with double washer (M58) 3.
Determine mounting position of the floor bases 2 for placement under the carpet.
Cut the carpet in "x" shape with a cutter and insert the floor bases 2 from under side of the carpet.
Mount the unit on the carpet with spring washers (M6) 6 and wing nuts (M6) 8.
Continued to 5 Securing leads, etc.

Securing leads, etc.

Take care wiring leads are not jammed by moving parts such as seat rail etc. and not damaged by touching protruded objects.
Connect the battery () terminal.

4. Confirmation

Turn on the engine key. Make sure the unit is operating correctly by referring to the Owners Manual.
Make sure the electrical components attached on the vehicle such as the brake lamp, stop lamp, etc. work correctly.
a Remote control holder mounting method If the remote control is in direct sunlight, remove it from the holder and keep it in the glove box. When the holder cannot be mounted securely with double-sided adhesive tape !, mount it by using screws ".
Reinforcement screws " Remote control Remote control holder Blue Protective Paper
Console box, etc. * Double-sided adhesive tape. (Before putting on the holder, clean dirt on the mounting location.)

Bring your iPod along for the ride. Single-cable interface makes for easy connection, giving you high-speed data transfer and full audio enjoyment.
More music, faster access. Weve got the tools to help you find your music quickly and easily.

Hands-free Calling

Special interface lets you connect your mobile phone to an Alpine head unit for hands-free calling, letting you hear callers voice on the speakers. Quickly and easily connect portable music players to your Alpine system and get the best sound possible.
Whatever kind of shiny disc you have, whatever your media sourceDVD-Audio or -Video, MP3 or WMAAlpine can play it for you.
Convenient USB memory sticks fit into your Alpine system, letting you bring along and play your MP3 collections.
Install a new Alpine head unit and still use your automobiles steering wheel remote control. Match the illumination colour of the Alpine head unit to your dashboard illumination.
Play DVD movies and other multichannel music sources in their full 5.1-channel glory.

HEAD UNITS

Enjoying your iPod in the carwith ultra-fast data transfer is just a cable connection away. Full speed ahead!

CDE-9850Ri

CD / MP3 / WMA RECEIVER
50W x 4 High-Power Amp 1 PreOut Pop-up Rotary Knob Includes Cable for iPod Connection

DVA-9861Ri

DVD / CD / MP3 / WMA RECEIVER
50W x 4 High-Power Amp 3 PreOuts Pop-up Rotary Knob Includes Cable for iPod Connection
These head units are Made for iPod, and feature noise-free play for all your other sources, too. (Requires KCA-420i iPod interface box.)

CDA-9857R

60W x 4 High-Power Amp 3 PreOuts Pop-up Rotary Knob

CDA-9856R

50W x 4 High-Power Amp 3 PreOuts Pop-up Rotary Knob

CDA-9854R

CDA-9852RB
50W x 4 High-Power Amp 1 PreOut Pop-up Rotary Knob

CDA-9852RR

DVA-9965R
Amp-less Design 3 PreOuts Video Composite Out / S-Video Out Rotary Knob

CDA-9855R

50W x 4 High-Power Amp 3 PreOuts Rotary Knob

CDA-9853R

CDA-9812RB
60W x 4 High-Power Amp 3 PreOuts Rotary Knob
Alpine Key Features for 2006
Connect your iPod to your Alpine system and enjoy more powerful, dynamic, expansive sound.
Super-fast data transfer ensures glitch-free playback and control over your iPod tracks.
This feature lets you connect other audio devices such as portable MP3 and CD playersto your system.
Find your favorite songs quickly and easily with these convenient search tools.

View important info of the head unit from your cars built-in sub display.
Head units either include a remote or are 'ready' for use with optional remotes.
One touch, and all your sources have full dynamic range, clarity and sonic power.
Set the illumination colour (Multi, Quad or Dual) to match the dash or any colour you want.
Playing all your CDs and MP3 trackswith exceptionally high quality.

CDE-9848RB

CD / MP3 RECEIVER
45W x 4 High-Power Amp 1 PreOut Rotary Knob AUX Input

CDE-9846R

45W x 4 High-Power Amp 1 PreOut

CDE-9846RM

CHANGERS

CASSETTE RECEIVERS

TDM-9501R Green illumination

CHA-S634

6-DISC CD / MP3 CHANGER / Ai-NET AND M-BUS* COMPATIBILITY

CHM-S630

6-DISC CD CHANGER / M-BUS COMPATIBILITY

CRM-1652RF

FM ADD-ON CD CHANGER CONTROLLER

TDM-9501R/RM

CASSETTE RECEIVER
Free Mounting Angles (0-90) * Requires KCA-130B adaptor
Free Mounting Angles (0-90)
Frequency Adjustable FM Modulator Control of CHM-S630

KCA-235B

Ai-NET TO MINI-JACK INTERCONNECTOR

KCA-123B

M-BUS TO MINI-JACK INTERCONNECTOR

KCA-410C

VERSATILE LINK TERMINAL
45W x 4 High-Power Amp 1 PreOut CD Changer Control TDM-9501RM Amber illumination
Includes 2.5mm - 3.5mm adaptor
2 Ai-NET Changer Inputs 2 A/V Inputs
MP3 and WMA compatibility ensures you can play CDs youve recorded with compressed files in those formats.
Upgrade to Alpine componentsand keep your steering wheel remote controls.
Bright colour, high resolution, realistic detaileven in daylight.
Easy and funjust glide your finger along the bar to operate your head unit.
Conveniently select menus and adjust controls by touching the monitor screen.
High power output at the preamp for high subwoofer power and lower distortion.
Upgrade to 5.1-channel surround and control the amp/processor from the head unit.
Allows pristine, loss-free transfer of audio data to an Alpine processor.

For details, please visit our website: http://www.alpine-europe.com
NVE-N099P DVD GPS CAR NAVIGATION SYSTEM
Equip your automobile with the most advanced, most accurate and most convenient guidance systems.
More sources, greater control with the ORB
VehicleHub Pro lets you add all of the media sources you want to your carand gives you greater control over them.
DVA-5210 DVD VIDEO / MP3 / WMA / CD PLAYER
Add a DVD player and enjoy your favourite movies.
TUE-T200DVB MOBILE DIGITAL TV RECEIVER (DVB-T)
HCE-C100 REVERSING CAMERA
KCA-420i INTERFACE FOR iPod
Tap into the wealth and variety of high-quality digital terrestrial TV with our DVB-T digital TV tuner.
Install our convenient reversing camera to your car, and see your way into tight parking spaces.
Bring your personal portable music collection into your carand enjoy the best possible sound for your iPod.
Wide interfacing compatibility
No matter which brand car you own, weve got the video interface to connect with VehicleHub Pro or VehicleHub and ensure seamless operation with your existing head unit and display. Check the list below for compatible vehicles, or see the chart on page 37.
BMW Nissan Rover Honda Porsche Mini Jaguar Toyota Audi Mercedes Benz VW Lexus SEAT Ford

Get a better view

No monitor in your current system? Weve got an entire line of high-quality, high-resolution monitors to make your mobile entertainment experience completeand open up all the VehicleHub Pro possibilities.
For further information, visit our website: http://gait.alpine-europe.com
Building up for optimum sound with VPA-B222R
With VehicleHub Pro, getting the sound you want out of the system you own is easier than ever before. Use the built-in amplifier to power your current speakers, step up to bigger and better amps, speakers and subwoofers, or equip your car for full multi-channel surround sound.

Built-in amplifier

VehicleHub Pro is more than just an interface. It also features a built-in 50W 4-channel amplifier that lets you get more power out of your system and original speakers.

Add more amps

Need more power? The built-in three PreOuts let you add as many ampsand powerto your system as you want. Upgrade to our new digital PDX amps and Type-X speakers for the best sound.

Full 5.1-channel sound

Go all the way. Connect one of our Theatre Amplifiers (with built-in surround processing), or opt for pro-level 5.1-channel processing with the PXA-H701. And control your entire multi-channel surround sound system from the ORB.
This interface solution lets you add on Alpine components to your existing system and enjoy the exciting new media, entertainment and sound expansion possibilities Alpine has to offer.

VPA-B211P

VehicleHub
Ai-NET Input NAVI RGB Input and NAVI MIX 1 A / V Output and 2 A / V Inputs Dedicated Rear View Camera Input with Automatic Switching Function VPE-S431 Input Included Remote Eye
Greater power, more entertainment
Whatever your current system, Alpine gives you convenient and easy ways to make it the best it can possibly be. Just add on! Add on.
a multi-channel theatre amp, plus extra speakers and a subwoofer.

Add on.

earth-shaking bass with our powerful subwoofer systems.
high-performance speakers for greater range and clarity.
a multi-disc changer and controller for long-play entertainment.
More than just audio and video, AV plus means controlling your entire system with our PulseTouch displays, playing DVD-Audio and DVD-Video discs in your car, and having comprehensive navigation. And that all adds up to a big plus.
Bring your favourite DVD movies and video entertainment into the car, and enjoy them with full sound and high resolution.
Comprehensive, accurate, ultra-fast road guidance is just a click away. Relax and leave the navigating to us.
Leaving home doesnt mean leaving your TV behind. Now you can tune into your favourite TV programmes in the car.

MOBILE MEDIA STATION

IVA-W200Ri
DVD / CD / MP3 / WMA RECEIVER / MOBILE MEDIA STATION
6.5" PulseTouch Display 280,800 pixels 1 A/V Output and 1 A/V Input Rear View Camera Input 3 PreOuts 50W x 4 High-Power Amp NAVI RGB Input and NAVI Voice Mix DVD Audio as 2-Ch Down-Mix Only TV Tuner Compatibility: TUE-T200DVB, T252TX, T112P
Quick solution for iPod Video For details, please visit our website: http://www.alpine-europe.com

IVA-D100RB/R

6.5" PulseTouch Display 1 Video Output and 1 A/V Input 3 PreOuts 50W x 4 External High-Power Amp Dual Illumination (only for IVA-D100R) Anti Theft Detachable Face Panel NAVI RGB Input and NAVI Voice Mix Rear View Camera Ready DVD Audio as 2-Ch Down-Mix Only TV Tuner Compatibility: TUE-T200DVB, T252TX, T112P

IVA-D100R Red illumination
IVA-D100RB Blue illumination
IVA-D100R Green illumination

IVA-D310R/RB

7" PulseTouch Display TFT Active Matrix Drive 336,960 pixels Front Panel Display 1A/V Output and 1 A/V Input 3 PreOuts 50W x 4 High-Power Amp Dual Illumination (only for IVA-D310R) Anti Theft Detachable Face Panel NAVI RGB Input and NAVI Voice Mix TV Tuner Compatibility: TUE-T200DVB, T252TX, T112P
IVA-D310RB Blue illumination
IVA-D310R Red illumination
IVA-D310R Green illumination
Visual EQ presets give you the best picture quality and brightness for all situations.

AV pLUS

CVA-1014R/RR/RB
6.5" Transparent type TN LCD Monitor 280,800 pixels 1 A/V Input 1 PreOut 45W x 4 High-Power Amp Ready for use with expansion box (KCE-104V) Anti Theft Detachable Face Panel NAVI RGB Input and NAVI Voice MIX TV Tuner Compatibility: TUE-T200DVB, T252TX, T112P
CVA-1014RR Red illumination
CVA-1014RB Blue illumination
CVA-1014R Green illumination
Putting the plus in your mobile entertainment
Super-advanced navigation systems, rear view camera, TV tuners. Its these Alpine pluses that make your driving experience complete.

Navigation

NVE-N099P
DVD GPS CAR NAVIGATION SYSTEM

HCE-C100

REVERSING CAMERA
Super-compact design for easy installation Wide 138-degree Field of View Size: 23.3mm x 23.4mm x 22.6mm *5 *6 *7 *8
DVD-ROM Drive Map Coverage (A, B, DK, F, D, IRL*2, I*1, L, N*1, P*2, E*2, S*1, CH, NL, GB, AND, FL, MC, RSM, CZ*2, V, H*2, FIN*1, SK*2 and PL*2) High Quality Voice Guidance in 12 Languages (German, French, English, Italian, Spanish, Dutch, Danish, Swedish, Polish, Hungarian, Czech and Slovak) High Speed CPU Compatible with PulseTouch Display and Touch Screen Monitor Built-In TMC Tuner Advanced TMC Functions Large TMC Area Coverage *3 TMC Event List TMC Event Voice 3D Motorway Junction Guidance*4
*1 Some small streets may not be included. *2 Partial coverage. *3 D, GB, F, I, CH, A, B, NL, E, DK, and S *4 D, GB, B, NL, L, I, F, A, I, E, and P *5 V-Trafic information in France provided by Mediamobile company *6 Traffic information in the UK provided by RAC Trafficmaster Telematics Ltd. *7 TMC PRO and traffic are registered trademarks of T-Mobile Traffic GmbH. *cities.

PKG-2000P

10.2" WIDE SCREEN OVERHEAD MONITOR WITH DVD PLAYER
10.2" WVGA Screen LCD Colour Monitor (1.15 million pixels) Includes Single Source Wireless Headphone Cable Harness Installation Kit with Trim Ring 1 A/V Output and 3 A/V Inputs (1 Game Port in Monitor Enclosure) DVD-R/RW Player Compatible
Ultra High Quality VGA Screen

TME-M780

7" WIDE SCREEN MONITOR
7" VGA Screen LCD Colour Monitor 3 AV inputs (1 A/V In/Out selectable, 2 AV In) Installation kit included IR Transmitter for HP included Wired Headohone x 2 Manual Dimmer
TME-M780EM: Extra Monitor available for expanding TME-M780 system.
Easy installation kit included.

Ultimate beauty

Alpines WVGA technologywith smaller components and 1.5 million pixelsdelivers the absolute brightest and sharpest display quality you can get in your car.
(Available on models PKG-2000P, PKG-1000P, and TME-M860.)
Visual EQ lets you easily and instantly adjust the picture quality of the monitor to best match the video source being played or to compensate for the surrounding light conditions.

WVGA Display

TME-M860
8" WVGA HIGH QUALITY PULSETOUCH DISPLAY
PulseTouch Display with GUI Interface NVE-N099P Touch Control Ready 8" WVGA Screen LCD Colour Monitor 1 A/V Output and 3 A/V Inputs NAVI RGB Input Built-in Speaker and Amplifier Headphone Output

PKG-1000P

10.2" WIDE SCREEN OVERHEAD MONITOR
10.2" WVGA Screen LCD Colour Monitor (1.15 million pixels) Includes Single Source Wireless Headphone Cable Harness Installation Kit with Trim Ring 1 A/V Output and 3 A/V Inputs (1 Game Port in Monitor Enclosure)

TME-M770S

6.5" TOUCH SCREEN WIDE MONITOR
Touch Panel Control with GUI Interface NVE-N099P Touch Control Ready 6.5" Wide Screen LCD Colour Monitor 1 A/V Output and 2 A/V Inputs NAVI RGB Input Built-in Speaker and Amplifier Headphone Output

DVA-5210

DVD VIDEO / MP3 / WMA / CD PLAYER

AMPLIFIRES / SUBWOOFERS / SPEAKERS PDX DIGITAL AMPLIFIERS
Fully digital. Ultra-compact. Enormously powerful.
Introducing the stackable, easy-to-install PDX series amplifiers.
Employing the latest digital technology, these amps are far smaller than comparable models yet deliver up to 2,200 watts of power!

2200W Max x 1

220W Max x 2

220W Max x 4

PDX-1.1000
MONO POWER DENSITY DIGITAL AMPLIFIER

PDX-2.150

2/1 CH. POWER DENSITY DIGITAL AMPLIFIER

PDX-4.150

4/3/2 CH. POWER DENSITY DIGITAL AMPLIFIER
1000W RMS x 1 [2 and 4@14.4V 1% THD] Low Resistance, High Current Speaker Terminals
150W RMS x 2 [2 and 4@14.4V 1% THD] 300W RMS x 1 [4@14.4V BTL 1% THD] Low Resistance, High Current Speaker Terminals
150W RMS x 4 [2 and 4@14.4V 1% THD] 300W RMS x 2 [4@14.4V BTL 1% THD] Low Resistance, High Current Speaker Terminals
TYPE-X SUBWOOFERS & SPEAKERS

3000W Peak Power

SWX-1242D
12" (30cm) SUBWOOFER (4 + 4 )

SWX-1042D

10" (25cm) SUBWOOFER (4 + 4 )
1000W RMS Frequency Response: 20Hz - 500Hz
1000W RMS Frequency Response: 22Hz - 500Hz

300W Peak Power

240W Peak Power

SPX-177R

6-1/2" (16.5cm) COMPONENT 2-WAY SPEAKER SET

SPX-137R

5-1/4" (13cm) COMPONENT 2-WAY SPEAKER SET
75W RMS Frequency Response: 35Hz - 60kHz
60W RMS Frequency Response: 40Hz - 60kHz

160W Peak Power

SPX-107R
4" (10cm) COMPONENT 2-WAY SPEAKER SET

SPX-17MB

6-1/2" (16.5cm) MID BASS KIT
40W RMS Frequency Response: 45Hz - 60kHz
75W RMS Frequency Response: 30Hz - 4kHz

Powered up

V12 AMPLIFIERS

1800W Max x 1

MRD-M1005
DIGITAL MONO POWER AMPLIFIER
1000W RMS x 1 [2@14.4V 1% THD] 700W RMS x 1 [4@14.4V 1% THD] 700W RMS x 1 [2@12V 1% THD] 500W RMS x 1 [4@12V 1% THD]

1000W Max x 1

225W Max x 2 + 500W Max x 1
140W Max x 2 + 300W Max x 1
90W Max x 4 + 370W Max x 1

MRD-M605

MRV-F545

MRV-F345

MRV-F450
5/4/3 CHANNEL POWER AMPLIFIER
600W RMS x 1 [2@14.4V 1% THD] 400W RMS x 1 [4@14.4V 1% THD] 400W RMS x 1 [2@12V 1% THD] 250W RMS x 1 [4@12V 1% THD]
125W RMS x 4 [4@14.4V 0.08% THD] 500W RMS x 1 [4@14.4V-BTL (3ch/4ch) 0.3% THD] 125W RMS x 1 [4@14.4V-BTL (1ch/2ch) 0.3% THD] 100W RMS x 4 [4@12V 0.08% THD]
75W RMS x 4 [4@14.4V 0.08% THD] 300W RMS x 1 [4@14.4V-BTL (3ch/4ch) 0.3% THD] 75W RMS x 1 [4@14.4V-BTL (1ch/2ch) 0.3% THD] 50W RMS x 4 [4@12V 0.08% THD]
50W RMS x 4 [4@14.4V 0.08% THD] + 200W RMS x 1 [4@14.4V 0.3% THD] 60W RMS x 4 [2@14.4V 0.3% THD] 120W RMS x 2 + 200W RMS x 1 [4@14.4V-BTL 0.3% THD] 30W RMS x 4[4@12V 0.08% THD] + 150W RMS x 1 [4@12V BTL 0.3% THD] 40W RMS x 4 [2@12V 0.3% THD] 80W RMS x 2 + 150W RMS x 1 [4@12V 0.3% THD]
TYPE-R SUBWOOFERS & SPEAKERS

2000W Peak Power

SWR-1522D (2 + 2 ) / 1542D (4 + 4 )
15" (38cm) SUBWOOFER
750W RMS Frequency Response: 22Hz - 500Hz

1500W Peak Power

SWR-1222D (2 + 2 ) / 1242D (4 + 4 )
12" (30cm) SUBWOOFER

TYPE-R READY TO USE BOX

500W RMS Frequency Response: 24Hz - 500Hz

SBR-1242SB

READY TO USE BASS SEALED SUBWOOFER BOX
SWR-1022D (2 + 2 ) / 1042D (4 + 4 )
10" (25cm) SUBWOOFER
500W RMS Built-in 12" (30cm) Type-R Subwoofer SWR-1242 Subwoofer designed and engineered in the USA
500W RMS Frequency Response: 28Hz - 500Hz

250W Peak Power

SPR-17LP
6-1/2" (16.5cm) COAXIAL 2-WAY SPEAKER
50W RMS Frequency Response: 35Hz - 30kHz

275W Peak Power

350W Peak Power

SPR-69LP

6" x 9" (15 x 23cm) COAXIAL 2-WAY SPEAKER

SPR-17LS

6-1/2" (16.5cm) COMPONENT 2-WAY SPEAKER
55W RMS Frequency Response: 30Hz - 30kHz
70W RMS Frequency Response: 35Hz - 30kHz

200W Peak Power

SPR-57LP
5" x 7" (12.5 x 17.5cm) COAXIAL 2-WAY SPEAKER

SPR-57LS

5" x 7" (12.5 x 17.5cm) COMPONENT 2-WAY SPEAKER
40W RMS Frequency Response: 35Hz - 30kHz
60W RMS Frequency Response: 35Hz - 30kHz
AMPLIFIRES / SUBWOOFERS / SPEAKERS V-POWER AMPLIFIERS

MRP-M650

600W RMS x 1 [2@14.4V 1% THD] 400W RMS x 1 [4@14.4V 1% THD]

600W Max x 1

350W Max x 2 (BTL)

180W Max x 2 (BTL)

90W Max x 2 / 240W Max x 1 (BTL)

MRP-M450

MRP-F450

MRP-F250

MRP-T220
2/1 CHANNEL POWER AMPLIFIER
400W RMS x 1 [2@14.4V 1% THD] 220W RMS x 1 [4@14.4V 1% THD]
200W RMS x 2 [4@14.4V-BTL 0.3% THD] 100W RMS x 4 [2@14.4V 0.3% THD] 70W RMS x 4 [4@14.4V 0.08% THD]
100W RMS x 2 [4@14.4V-BTL 0.3% THD] 50W RMS x 4 [2@14.4V 0.3% THD] 40W RMS x 4 [4@14.4V 0.08% THD]
140W RMS x 1 [4@14.4V-BTL 0.3% THD] 70W RMS x 4 [2@14.4V 0.3% THD] 50W RMS x 4 [4@14.4V 0.08% THD]
TYPE-S SUBWOOFERS & SPEAKERS

900W Peak Power

SWS-1222D (2 + 2 ) / 1242D (4 + 4 )
300W RMS Frequency Response: 26Hz - 1kHz
SWS-1022D (2 + 2 ) / 1042D (4 + 4 )

READY TO USE BOX

300W RMS Frequency Response: 30Hz - 1kHz

SBS-1241BR

READY TO USE BASS REFLEX SUBWOOFER BOX
200W RMS 12" (30cm) High Performance Subwoofer

SPS-17C2

6-1/2" (16.5cm DIN) COAXIAL 2-WAY SPEAKER

SPS-69C3

6" x 9" (15 x 23cm) 3-WAY SPEAKER
50W RMS Frequency Response: 30Hz - 30kHz

175W Peak Power

SPS-13C2
5-1/4" (13cm) COAXIAL 2-WAY SPEAKER

SPS-69C2

SPS-171A
6-1/2" (16.5cm DIN) COMPONENT 2-WAY SPEAKER
35W RMS Frequency Response: 45Hz - 30kHz
50W RMS Frequency Response: 35Hz -30kHz

120W Peak Power

SPS-1005
3/8"(1cm) BALANCED DOME TWEETER

SPS-57C2

SPS-571A
5'' x 7'' (12.5 x 17.5cm) COMPONENT 2-WAY SPEAKER
30W RMS Frequency Response: 5kHz - 22kHz
TYPE-E SUBWOOFERS & SPEAKERS

750W Peak Power

SWE-1242
12" (30cm) SUBWOOFER (4)
250W RMS Frequency Response: 28Hz - 1kHz

SWE-1042

10" (25cm) SUBWOOFER (4)

75W Peak Power

250W RMS Frequency Response: 32Hz - 1kHz

SPE-1002

4" (10cm) COAXIAL 2-WAY SPEAKER
15W RMS Frequency Response: 55Hz - 25kHz

150W Peak Power

SPE-1702

SPE-6903

30W RMS Frequency Response: 35Hz - 25kHz
30W RMS Frequency Response: 30Hz - 28kHz

100W Peak Power

SPE-1302

SPE-6902

6" x 9" (15 x 23cm) 2-WAY SPEAKER

20W RMS Frequency Response: 50Hz - 25kHz
30W RMS Frequency Response: 30Hz - 25kHz

TYPE-L SUBWOOFERS

800W Peak Power

SWL-1242

500W Peak Power

SWL-1042

150W RMS Frequency Response: 33Hz - 1kHz

CUSTOM FIT SPEAKERS

180W Peak Power 280W Peak Power

SXS-1757

SXE-1750S
60W RMS Frequency Response: 60Hz - 22kHz
45W RMS Frequency Response: 60Hz - 20kHz

SXS-1357

5-1/4" (13cm) COMPONENT 2-WAY SPEAKER

SXE-1350S

50W RMS Frequency Response: 80Hz - 22kHz
40W RMS Frequency Response: 60Hz - 20kHz

280W Peak Power

220W Peak Power

SXE-6925S

SXE-5725S

SXE-1725S

SXE-0825S
3-1/2" (8.6cm) COAXIAL 2-WAY SPEAKER
45W RMS Frequency Response: 40Hz - 20kHz
35W RMS Frequency Response: 70Hz - 20kHz
20W RMS Frequency Response: 120Hz - 16kHz

180W Peak Power

SXE-4625S
4" x 6" (10 x 15cm) COAXIAL 2-WAY SPEAKER

SXE-1325S

SXE-1025S
20W RMS Frequency Response: 90Hz - 20kHz
25W RMS Frequency Response: 100Hz - 20kHz
5.1-CHANNEL SURROUND SYSTEM
Step into a new world every time you get into your carthe breathtaking, spacious world of 5.1-channel surround. Weve got a full lineup, including all-in-one amps with 5.1-channel processing built right in, that fulfills all your surround sound needs.
MULTI-CHANNEL & THEATRE AMPLIFIERS
With these all-in-one amp/processor units, stepping up to 5.1-channel sound is easier than ever before.
Intelligent Bass Management
One of the keys to optimum sound in a 5.1-channel surround system is bass management. Alpines Intelligent Bass Management technology makes sure that the low frequency content is properly directed to the subwoofer. Moreover, it allows you to set the crossover point, ensuring that no audio content will be lost in the processing. It also features a Mid-Bass Management control, which filters out bass frequencies going to the small centre speaker and redirects them to the subwoofer.

80W Max x 5

MRA-F355

THEATRE AMPLIFIER

50W RMS x 5 [4 @14.4V (0.08%THD)] S/N Ratio 100dBA (IHF A-Weighted Reference at Rated Power into 4) Manual Time Correction Parametric EQ Bass Management

MRA-D550

DIGITAL THEATRE AMPLIFIER
60W RMS x 5 [4 @14.4V (1%THD)] 45W RMS x 5 [4 @12V (1%THD)] Manual Time Correction Parametric EQ Intelligent Bass Management

CENTRE CHANNEL SPEAKERS

In concert, front row, centre seat. Enjoy the fully lifelike experience of theatre surround. DLB-100R
4" (10cm) COAXIAL 2-WAY LINEAR DRIVE CENTRE CHANNEL SPEAKER
150W Peak Power 30W RMS Frequency Response: 75Hz-70kHz Installation Kit Included

SBS-05DC

1DIN CENTRE CHANNEL SPEAKER
150W Peak Power 50W RMS Frequency Response: 150Hz-30kHz 1DIN Enclosure with Installation Kit In-dash Mount Compatibility Removable Grill
MULTI-CHANNEL MUSIC PROCESSORS
Sophisticated pro-level sound processing for the ultimate surround experience.

Digital Time Correction

With multi-channel sound coming at you from all sides, the time each sound reaches you is crucial in determining the realism of the surround effect. Digital Time Correction uses sophisticated delay processing to create virtual speaker positions and ensure that the specific sounds from all speakers reach your ears at exactly the same time.

PXA-H701

MULTIMEDIA MANAGER
Auto (with RUX-C701) and Manual Time Correction 31-Band Graphic EQ or Parametric EQ

RUX-C701

CONTROLLER FOR PXA-H701
In-dash controller for use with PXA-H701 in stand-alone mode

ACTIVE SUBWOOFERS

Small, compact powered subwoofers that deliver decidedly huge sound.
350W Peak Power 350W Peak Power 350W Peak Power 150W Peak Power

SWD-3000

12" (30cm) POWERED SUBWOOFER BOX (4)

SWD-2030

Dual 8" (20cm) PASSIVE RADIATOR DESIGN POWERED SUBWOOFER BOX (4)

SWD-2000

8" (20cm) POWERED SUBWOOFER BOX (4)

SWD-1600

POWERED SUBWOOFER BOX (4)
Frequency Response: 35Hz - 200Hz (24dB/oct)
150W RMS Low Pass filter: 50Hz - 150Hz (12dB) Made in Germany
Frequency Response: 50Hz - 200Hz (24dB/oct)
6-1/2" (16.5cm) Dual Load Design Low Pass Filter: 60Hz-150Hz (24dB/oct.)

Accessories

AlpineF#1Status

Ai-NET

Ai-NET/IONBUS CONVERTER

250Wx2 (Ch-3/4) 500Wx1 (Ch-3/4)

75Wx 4

150Wx2 (Ch-3/4)
50W x 4 + 200W 400W*x 1 60W x 4 600W*x 1 -

220W*x 1 400W*x 1 -

70W x 4 100W x 4 200W x 2 140W x 4 350W x 2
40W x 4 50W x 4 100W x 2 75W x 4 180W x 2
50W x 2 70W x 2 140W x 1 250W

50W**x 5 80W x 5 -

60W**x 5 80W x 5 -
200W x 4 1.000W x 1 150W**x 4 150W**x 2 1.000W*x1 600W*x 1 400W x 2 200W x 4 220W x 4 220W x 2 -
300Wx1 (Ch-3/4) 120W x 2 + 200W

225W x 4 -

140W x 4 -

600W x 2 2.200W x 1

1.800W x 1 1.000W x 1
240W x 2 + 370W 1.000W x 1 600W x 1
MOS-FET Power Supply Transistors

DC-DC PWM Power Supply

DC-DC PWM Power Supply S.T.A.R. Circuit Subsonic Filter Subsonic Filter Bass EQ Top Panel Display Subsonic Filter Subsonic Filter

Top Panel Adjustable

Top Panel Adjustable PreOut PreOut PreOut Speaker Level Input One-sided Terminal Layout RMS Continuous Power Pre Channel into 4 (0.08% THD) Pre Channel into 2 (0.3% THD) at 12.0V, 20Hz-20kHz Bridged 4 (0.3% THD) MAX Power
Stereo Bridged (except Mono)

PreOut (Subwoofer)

Dual-sided Terminal Layout RMS Continuous Power Pre Channel into 4 (0.08% THD) Pre Channel into 2 (0.3% THD) at 14.4V, 20Hz-20kHz Bridged 4 (0.3% THD)
One-sided Terminal Layout
Recommended Amplifier and Subwoofer Matching
12 inch 10 inch 15 inch 12 inch 10 inch 12 inch 10 inch 12 inch 10 inch 12 inch 10 inch SWR-1522D SWR-1222D SWR-1022D SWS-1222D SWS-1022D
SWX-1242D SWX-1042D SWR-1542D SWR-1242D SWR-1042D SWS-1242D SWS-1042D SWE-1242 SWE-1042 SWL-1242 SWL-1042
PDX-1.1000 PDX-4.150 Bridged PDX-2.150 Bridged MRD-M1005 MRD-M605 MRV-F545 Ch. 3+4 Bridged MRV-F345 Ch. 3+4 Bridged MRP-M650 MRP-M450 MRP-F450 Bridged MRP-F250 Bridged
Perfect match of amplifier performance and subwoofer power handling. Possible match, but either amplifier or subwoofer wont use full potential Not recommended. Total mismatch of amplifier and subwoofer.