Voice Navigation System

ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-Ratingen, Germany Tel.: 02102-ALPINE ITALIA S.p.A. Via C. Colombo 8, 20090 Trezzano Sul Naviglio MI, Italy Tel.: 02-81 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 280) 98, Rue De La Belle Etoile, Z.I. Paris Nord Il B.P. 50016 F-95945, Roissy, Charles De Gaulle Cedex, France Tel.: 01-ALPINE ELECTRONICS OF U.K., LTD. 13 Tanners Drive, Blakelands, Milton Keynes MK14 5BU, U.K. Tel.: 01908-56 ALPINE ELECTRONICS DE ESPAA, S.A. Portal De Gamarra 36, Pabelln Vitoria (Alava)-Apdo. 133, Spain Tel.: 34-45-283588 Yamagata Printing Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan Designed by ALPINE Japan Printed in Japan (Y) 68P30540Y43-O

NVE-N077P

OWNER'S MANUAL
Please read before using this equipment.
Auto Route Calculation Destination Search Real Time Voice Guidance

MODE D'EMPLOI

Veuillez lire ce mode d'emploi avant la mise en service de l'appareil.
Calcul automatique d'itinraire Recherche de destination Guide vocal en temps rel

MANUAL DE INSTRUCCIONES

Lea este manual antes de utilizar este equipo.
Clculo automtico de ruta Bsqueda de destino Gua de voz en tiempo real

BEDIENUNGSANLEITUNG

Bitte lesen Sie diese Bedienungsanleitung vor Gebrauch Ihres Navigationssytems durch.
Automatische Streckenermittlung Zielort-Suche Echtzeit-Sprachfhrung

ISTRUZIONI PER L'USO

Leggere questo manuale prima di usare l'apparecchio.
Calcolo automatico del percorso Ricerca della destinazione Guida a voce in tempo reale

GEBRUIKSAANWIJZING

Lees de gebruiksaanwijzing zorgvuldig door alvorens u het apparaat in gebruik neemt.
Automatisch uitstippelen van de route Zoeken van uw bestemming Gesproken instructies terwijl u rijdt

RETURN

DUAL LAYER DVD HIGH SPEED ROUTE GUIDANCE COMMUNICATION PORT
GPS CAR NAVIGATION SYSTEM PUSH OPEN

LO.PT.

Precautions

English

PRECAUTIONS
IMPORTANT INFORMATION, PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT.
This product is intended to safely provide turn by turn instruction to get you to a desired destination. Please read the following precautions to ensure that you use this navigation system correctly.
H This product is not a substitute for your personal judgment. Any route suggestions made by this navigation system may never supersede any local traffic regulations or your personal judgment and/or knowledge of safe driving practices. Do not follow route suggestions if the navigation system instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or routes you into an area which you consider unsafe. H Glance at the screen only when necessary and safe to do so. If prolonged viewing of the screen is necessary, stop in a safe and legal manner and location. H Do not input destinations, change settings, or access any functions requiring a prolonged view of the monitor and/or remote control while you are driving. Stop in a safe and legal manner and location before attempting to access the system. H Do not use the navigation system to route you to emergency services. Not all locations of emergency service providers such as police and fire stations, hospitals, and clinics are contained in the database. Please use your own judgment and your ability to ask for directions in these situations. H The map database contained within the media (DVD ROM) in which it is stored is the most recent map data available at the time of production. Because of changes in streets and neighborhoods, there may be situations where the navigation system may not be able to route you to your desired destination. In these cases, use your own personal judgment. H The map database is designed to provide you with route suggestions, it does not take account of the relative safety of a suggested route, or of factors which may affect the time required to reach your destination. The system does not reflect road closures or construction, road characteristics (i.e. type of road surface, slope or grade, weight or height restrictions, etc.), traffic congestion, weather conditions, or any other factors which may affect the safety or timing of your driving experience. Use your personal judgment if the navigation system is unable to provide you with an alter2 nate route.

H There may be situations where the navigation system may display the vehicles location erroneously. Use your own driving judgment in this situation, taking into account current driving conditions. Please be aware that in this situation, the navigation system should correct the vehicles position automatically; however, there may be times where you may have to correct the position yourself. If this is the case, stop in a safe and legal manner and location before attempting operation. H Make certain that the volume level of the monitor is set to a level which still allows you to hear outside traffic and emergency vehicles. Driving while unable to hear outside sounds could cause an accident. H Position the monitor so that glancing at the screen can be performed quickly and easily by the driver. If any adjustments are necessary, stop in a safe and legal manner and location. H The monitor used with this system should not be placed in a location which hinders the drivers view of any critical elements necessary to operate the vehicle properly (i.e. the road, mirrors, instruments, vehicles surroundings). In addition, the monitor should not be placed in a location which may obstruct the air bags should they deploy. H Remember to wear your seat belt at all times when the car is in motion. This will help you avoid impact with anything in the cars interior, including the system itself. H Please make certain that any other person who intends on using this navigation system reads these precautions and the following instructions carefully. H If there is anything in the manual which you do not understand, or are uncertain about the operation of the navigation system, please contact an authorized representative before using the navigation system.
Points to Observe for Safe Usage
a Read this manual carefully before starting operation and use this system safely. Alpine cannot be responsible for problems resulting from failure to observe the instructions in this manual. a This manual uses various pictorial displays to show how to use this product safely and to alert you to potential dangers resulting from improper connections and operation. Following are the meanings of these pictorial displays. It is important to fully understand the meanings of these pictorial displays in order to use this manual and the system properly.

aMeaning of displays

Warning Caution
This symbol means important instructions. Failure to heed them can result in serious injury or death.
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
This indicates supplementary explanation of operation of this system.

Locations where GPS signals are received easily
The optimum locations for receiving GPS signals are locations that command a good view where there are no tall buildings, trees, or other objects to obstruct the signals.
Locations where GPS signals cannot be received
In the following locations or conditions GPS signals cannot be received. However even in these locations, the gyroscope and speed sensor will provide a substitute means of determining the vehicle's position and the system will be able to continue to track the vehicle's progress along the route.
In tunnels and indoor parking lots
Locations surrounded by tall buildings
Locations surrounded by tall trees
On the bottom level of double-decker motorways
When a GPS satellite is low on the horizon (angle below 10), obstructions sometimes make normal reception impossible
Remote control and display
Operation varies depending upon the disc version in use. For details, refer to the manual for the DVD ROM.
Remote control transmitter
This section transmits the remote control signals. Point toward the monitor display for operation.

Rotary encoder

This has multiple functions. In map displays, zooms in or out; in list displays, scrolls list pages; in coordinate inputting, moves cursor; in alphabet inputting, moves alphabetical characters.

ENTER button

Selects a highlighted item in the menu when the button is pressed. Press this button until a click sound is produced to execute your selection.

MENU button

Displays the menu screen. (See Tips.)

VOIC E

VOICE button
Press this button for voice guidance. (Real time voice guidance)

LO.PT. ZOOM

DEST (Destination) button
Displays street name inputting screen.

ROUTE button

Pressing this button searches for the route again and switches between motorway preference and ordinary road preference for route searching.

7 BS 9 OK

POWER On button
Turns the pictorial display on.

Power OFF button

Turns the pictorial display off.
a Be sure to apply the parking brake before starting the menu operation, otherwise the menu operation cannot be performed. a If an operation is not accepted, the navigation system beeps. a For more information on remote control handling, see Remote Control Precautions on page 13. a Adjust the volume with the control on display monitor, etc.

BS button

Deletes the character previously input.

Numeric Keypad

Use these buttons to enter phone numbers, address numbers or street names containing numbers (i.e., 42nd St.). Please refer to the OWNERS MANUAL (included with DVD-ROM) for software operating instructions.

Transmitting indicator

Blinks while the remote control signals are transmitted.
Stickers are provided with the remote control to be used by the people who speak one of the five other languages than English. To use these stickers, please see the portion for the desired language.

Joystick

Tilt this to select items from menus and moves the map in eight directions.

RETURN button

Returns the navigation system to the previous searching.

button

Press to switch between the map and guide (with arrow) modes.

POS. (Position) button

Returns to the current position of your vehicle or displays the latitude/longitude. When this button is kept pressed, the screen display changes as follows: North-up Heading-up

ZOOM buttons (5, 6) 5

Change the map magnification ratio upward or downward in 13 steps (400 km, 200 km, 100 km, 50 km, 25 km, 12 km, 6.4 km, 3.2 km, 1.6 km, 800 m, 400 m, 200 m, 100 m)
LO.PT. (Local Point) button
Pressing this button displays the current position of the vehicle or local interest points in the vicinity. When this button is pressed, the selection menu for the displayed local points will appear in the display.

OK button

Executes numeral inputtings and starts searching.

Main unit

DVD-ROM compartment door a Keep the door closed except when changing the DVD-ROM. a Before inserting or removing the DVDROM, always turn the ignition key to ACC or ON. You cannot remove or Tips insert the DVD-ROM with the ignition key turned OFF. a Do not insert any DVD Video discs or map DVD-ROM.

Inserting the DVD-ROM

Removing the DVD-ROM
Press the door in gently then slide it downwards.
Press the door in gently then slide it downwards. The DVD-ROM is automatically ejected part way.
If the DVD-ROM is not removed, it is automatically drawn back into the player after a while.
Caution Never close the door while the DVD-ROM is being unloaded. Doing so could scratch the DVDROM or damage the player.
If a DVD-ROM is already in the main unit, the DVD-ROM is automatically ejected part way.
Insert the DVD-ROM with the label side facing up.
When you insert the DVD-ROM into a certain position, it is automatically pulled into the navigation system.
Do not touch the surface of the disc directly with your fingers.

Close the door.

Be sure to close the door to prevent dust from getting inside.
a The DVD-ROM is a delicate device. Avoid dropping or scratching it. a Keep the DVD-ROM away from dust and moisture.

If you press the POWER button, the opening screen is displayed.
a If there is no disc in the navigation system, "Please insert map DVD ROM" is displayed. For details on how to load the disc, see "Inserting the DVD-ROM" and "Removing the DVD-ROM" on page 12. a If the disc cannot be read, the "DVD ROM unreadable. Please check DVD ROM" message is displayed. Try reloading the disk and if the problem cannot be cured, return to an authorized Alpine dealer. a If the monitor is kept on with the engine off for an extended period of time, the vehicles battery may discharge. a Operation varies depending upon the disc version in use. For details, refer to the manual for the DVD ROM.

In case of difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Symptom

Blown fuse Ambient temperature over 50C

Solution

Replace with a fuse of the prescribed rating. Lower the temperature in the vehicle below 50C, for example by running for a while with the window open or by using the air conditioner. Allow enough time for the condensation to evaporate (about 1 hour). Drive for a while with GPS signal reception.

No operation

Moisture condensation The present car position cannot be measured correctly. The car position changed after the ignition was switched off. Movement on a ferry boat Rotation of a parking lot turntable Movement by tow truck Poor satellite configuration Measurement is 2 dimensional. The navigation screen is off. The disc is dirty. The pickup lens is dirty. The remote control batteries are wearing out.
The measurement error is too large. Screen not displayed Cannot read disc is displayed for a certain operation. Unstable operation
Move to a location where GPS satellite reception is easy. (See page 9.)

Press the POWER button on the remote control. Clean the disc. Have the pickup lens cleaned periodically. Replace the remote control batteries. (See page 13.)

If this message appears

Various messages are displayed on the screen during operation. In addition to the messages telling you the current status or providing guidance for the next operation, there are also the following error messages. If one of these error messages is displayed, carefully follow the instructions in the solution column.
Message Please insert map DVD ROM. Cause The disc has been removed. There was no disc in the system when the power was switched on. A disc that this system cannot read has been loaded. The disc is dirty or upside down. The disc cannot be read because of condensation. DVD ROM being checked. A disc was just inserted Vibration or the like made it impossible to read the disc. The MENU button was pressed while the vehicle was running. A menu selection operation was carried out while the vehicle was running. Solution Insert the disc (sold separately).
DVD ROM unreadable. Please check DVD ROM.
Insert the map disc (sold separately). Take out the disc, check if it was upside down, clean it if necessary, then reinsert it. Take out the disc, allow enough time for the condensation to evaporate (about 1 hour), then re-insert the disc. When the disc check is complete, the following screen is displayed automatically. Move the vehicle to a safe location, stop, and engage the parking brake, then carry out this operation.
Do not operate while driving. Stop the car, then use this operation.

Specifications

Power requirement Operating temperature (main unit) Aerial type Reception frequency Reception sensitivity Reception method External dimensions Weight 14.4 VDC (V allowable) negative ground +14F to +122F (10C to +50C) Micro-strip planar aerial 1575.421 MHz 130 dB max. Parallel 8 channels 73/4 (196) 2 (50) 79/16" (191.5 mm) Navigation unit (W H D) Remote controller (W H D) 13/4 (45) 13/4 (45) 51/4" (135 mm) 3 lbs. 12 oz (1.7 kg) Navigation unit 2.5 oz (0.07 kg) Remote controller

Accessories

Product Installation parts Aerial Remote control Batteries (AA) Q'ty 1 set 1 set 1 set 2 Product Power connector 13-P RGB extension cable Owner's manual, audiopass, etc. Q'ty 1 set
ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-Ratingen, Germany Tel.: 02102-ALPINE ITALIA S.p.A. Via C. Colombo 8, 20090 Trezzano Sul Naviglio MI, Italy Tel.: 02-81 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 280) 98, Rue De La Belle Etoile, Z.I. Paris Nord Il B.P. 50016 F-95945, Roissy, Charles De Gaulle Cedex, France Tel.: 01-ALPINE ELECTRONICS OF U.K., LTD. 13 Tanners Drive, Blakelands, Milton Keynes MK14 5BU, U.K. Tel.: 01908-56 ALPINE ELECTRONICS DE ESPAA, S.A. Portal De Gamarra 36, Pabelln Vitoria (Alava)-Apdo. 133, Spain Tel.: 34-45-283588 Designed by ALPINE Japan Printed in Japan (Y) 68P30540Y46-O

Guide for Installation and Connections Guide dinstallation et de connexion Gua de instalacin y conexiones Installations- und Anschluanleitung Guida allinstallazione e al collegamento Handleiding voor installatie en aansluiting
English Franais Espaol Deutsch Italiano Nederlands
Yamagata Printing Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan
s GUIIDE FOR INSTALLATION AND CONNECTIONS FOR AUTHORIZED ALPINE DEALERS Please read this GUIDE FOR INSTALLATION AND CONNECTIONS FOR AUTHORIZED ALPINE DEALERS and the OWNERS MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new NVE-N077P will give you many years of enjoyment. In case of problems when installing your unit, please contact your authorized ALPINE dealer. BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts. DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous. DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock. DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident. DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc. DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG. If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.

For safe operation of this system, please read this manual carefully. We cannot be responsible for problems resulting from failure to observe the instructions in this manual. Pictorial displays are used to point out safety tips to prevent harm to yourself or others and property damage. Here is what these pictorial displays mean. Knowing them is important to understand this manual. Meaning of displays This symbol means important Warning instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them Caution can result in injury or material property damage.
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure. DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions IMPORTANT

Please record the serial number of your unit in the space provided on the back cover of Owners Manual and keep it as a permanent record. The serial number plate is located on the bottom of the unit. For installation of the main unit, avoid areas with a high incidence of dust or moisture. Installing the unit in such locations may result in contamination of the DVD ROM making it unreadable. Do not install the navigation system near a CD player that may interfere with GPS signal reception. The optimum locations for instaling the GPS aerial are: on the dashboard where no metal piece (such as the defogger wire or aerial wire) is located on the windshield. where no metal cover is located. Route the Speed Pulse Sensor cable away from the audio cables in order to avoid picking up noises.

PRECAUTIONS 1. Preparation 2. Connections 3-1. NVE-N077P Wiring Diagram With TME-M750 3-2. NVE-N077P Wiring Diagram With IVA-C800R/IVA-M700R/ CVA-1005R 3-3. NVE-N077P Wiring Diagram With CVA-1000R 6 7
3-4. NVE-N077P Wiring Diagram With TME-M006SP/TME-M005P 10 3. Mounting 4. Confirmation 12 14

1. Preparation

Check accessory parts.

GPS aerial

Aerial mounting plate

3 Cable clamper

Parking brake aux. cord

2 Solderless connector

Remote control 2

Remote control holder

EING. EING. EING. EING. EING.

ZURUCK

UNGEB.

Power cables 1 Bracket

13P RGB extension cable (6 m)

Extension cables

Battery (AA)

Remote control stickers

2 Floor base
3 Screw with double washer (M5 8) 4

4 Hex bolt (M6 50) 4

5 Flanged self-tapping screw (M5 15) 4
One each for left and right 6 Spring washer (M6) Flanged hex nut (M6) 4

Wing nut (M6)

9 Velcro fastener 2

! Velcro tape

" Self-tapping screw (M4 12) 4
Prepare tools and mounting information.

Screwdriver

Electrical tape

Pliers

Spanner

Pencil and eraser

Park the vehicle in a safe and level location.
Apply the brake and remove the ignition key.
Mount the aerial on the roof.
Clean dust and oil at the mounting location and mount the aerial. Notes: The magnet of the aerial is very strong. Proceed cautiously to prevent any damage to the vehicles body. Keep the magnet away from articles susceptible to magnetic fields such as credit cards, watches, etc. Do not paint the aerial. Reception sensitivity may be decreased. Aerial
Mounting the aerial inside the vehicle.
1. Clean the mounting location. 2. Put on the aerial mounting plate. 3. Mount the aerial. Notes: Mount the aerial on a flat plane of the dash board or rear tray. Some thermal reflection type or thermal absorption type glass may interrupt high frequency waves. If reception is poor with the aerial installed inside the car, try to mount the aerial outside the car.

Aerial

Routing the aerial cable.
1. Route the cable using the provided cable clampers to take up the cables slack. 2. Use the waterproof pad when running the cable under the vehicles rubber gasket. 3. Attach the cable at several points using the remaining cable clampers. Water proof pad Cable clamper

3-2. NVE-N077P Wiring Diagram With IVA-C800R/IVA-M700R/CVA-1005R

FM ANNTENA

R AUDIO L (MONO) AUX OUTPUT
13P RGB Extension Cable Included

AUX2 Ai-NET R

AUX1 R AUDIO L (MONO) AUX OUTPUT VIDEO REMOTE OUT L FRONT REAR AUDIO SUB W. POWER SUPPLY
MOBIL MEDIA STATION 45WX4 IVA-C800R

IVA-C800R

3-3. NVE-N077P Wiring Diagram With CVA-1000R
Blue (Modulator Control) White/Brown (Remote Output) White/Green (Guide Control Input) Yellow/Red (Display Control Input) Yellow/Blue (Parking Brake Input)

Not Connected

(White/Brown) (White/Brown) (5A)

Battery Lead (Yellow)

BATTERY (White/Green) (White/Green) (5A) (Yellow/Red) (Yellow/Red) Ground (Black) Connect to a metal part of chassis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line Acc (Ignition) To the Acc power lead
Extension Cables Included

White/Blue (Dimmer)

Red (Ignition)

Yellow (Battery)

Black (Ground)

TFT COLOR LCD

SYSTEM CONTROL MONITOR / RECEIVER 35Wx4 CVA-1000R
VOLUME V.SEL SET UP SOURCE FUNC MUTE

POWER SUPPLY Ai-NET

VIDEO OUTPUT
SYSTEM CONTROL MONITOR / RECEIVER CVA-1000R

(Yellow)

(Yellow) 1 Ground (Black) Acc (Ignition) (Red) Mute (Pink/Sky blue) Open Open Battery (Yellow) Dimmer In (Illumination) (White/Blue) Speed Sensor (Green/White) Parking Brake (Yellow/Blue) Reverse (Orange/White) 2

CVA-1000R

(White)
Optional KCE-030N RCA to 13-Pin DIN Adaptor
3-4. NVE-N077P Wiring Diagram With TME-M006SP/TME-M005P
Yellow/Red (Display Control Input) White/Brown (Remote Control Output) Yellow/Blue (Parking Brake Input) (Yellow/Red)

(White/Green)

(5A) BATTERY Acc (Ignition) To the Acc power lead (5A)

(Yellow/Red)

(White/Brown)
(White/Brown) Ground (Black) Connect to a metal part of chassis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line
White/Blue (Dimmer Input)
Parking Brake (Yellow/Blue) To the parking brake signal line Reverse (+) (Orange/White) To reverse lights (+12V signal)
Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V 3V)

LCD COLOR MONITOR

TME-M006SP
POWER SUPPLY DISPLAY OUTPUT

ATTENUATOR HIGH

LOW NAVIGATION IN

AUDIO AUX IN VIDEO COLOR

L AUDIO R

BRIGHT

TME-M006SP/TME-M005P
(White) (Yellow) (White) (Yellow)
9 Optional KCE-030N RCA to 13-Pin DIN Adaptor
Connect the power lead to this unit.
Insert until a click sound is heard.
Wrap electrical tape around end of leads not used.
Connect the battery () terminal and turn the ignition key to the ACC or ON position. Check to see if operation can be performed properly.
(Is the power turned on? Is the illumination turned on?) You can check the language selection menu with the monitor. (Refer to the Owners Manual for details.) Go to step 7 after checking is completed.
Turn the ignition key to the OFF position to turn off the power after completion of the check.
Pull out the ignition key and remove the battery terminal () again to begin installation procedure.

3. Mounting

Note: The main unit must be mounted within 5 degrees of the horizontal plane, left to right, and 30 degrees of the horizontal plane, back to front. Less than 30
a When mounting using Velcro fastener

Place Velcro fasteners.

Place two pieces of Velcro fasteners onto the mounting surface. The rough side should be facing the navigation unit.
Press the Navigation unit onto the Velcro fastener at the mounting position.
Remove the backing to the adhesive on the Velcro strips. Press the Navigation unit onto the mounting location. Continued to 5 Securing leads, etc. Velcro fasteners Floor
a When mounting on the rear tray
Mount the brackets 1 on the unit.
Mount the brackets at both sides of the unit with screws with double washer (M58) 3.
Depending on the locations of the mounting screw holes, the mounting brackets (for the left and right) can be used on either side.

(Bottom side)

Attach the unit on the rear tray.
Attach the unit securely with hex bolts (M650) 4, flanged hex nuts (M6) 7, spring washers (M6) 6, and wing nuts (M6) 8. Continued to 5 Securing leads, etc.
a When mounting the unit directly on the floor
Mount the unit on the floor.
Mount the unit on the floor with flanged self-tapping screws (M515) 5 and spring washers (M6) 6. Warning: Do not damage pipe or wiring when drilling holes. Continued to 5 Securing leads. etc.

a When mounting with floor base brackets

Mount the brackets 1.

Mount the brackets 1 at both sides of the unit with screws with double washer (M58) 3.
Determine mounting position of the floor bases 2 for placement under the carpet.
Cut the carpet in "x" shape with a cutter and insert the floor bases 2 from under side of the carpet.
Mount the unit on the carpet with spring washers (M6) 6 and wing nuts (M6) 8.
Continued to 5 Securing leads, etc.

Securing leads, etc.

Take care wiring leads are not jammed by moving parts such as seat rail etc. and not damaged by touching protruded objects.
Connect the battery () terminal.

4. Confirmation

Turn on the engine key. Make sure the unit is operating correctly by referring to the Owners Manual.
Make sure the electrical components attached on the vehicle such as the brake lamp, stop lamp, etc. work correctly.
a Remote control holder mounting method If the remote control is in direct sunlight, remove it from the holder and keep it in the glove box. When the holder cannot be mounted securely with double-sided adhesive tape !, mount it by using screws ".
Reinforcement screws " Remote control Remote control holder Blue Protective Paper
Console box, etc. * Double-sided adhesive tape. (Before putting on the holder, clean dirt on the mounting location.)