PKG-1000P_EN.indd ii

5/17/2005 1:39:34 PM

ENGLISH

Contents

Operating Instructions

WARNING TV Tuner Control
Selecting Preset Channel..11 Seeking Channel Manually..11 Memorizing Channel..11

ntents

WARNINGS.. 2 CAUTION... 3 PRECAUTIONS.. 3

Wireless Headphone

Headphone Receivers..11 Operation...11 Battery Installation..11

Monitor Features

Features... 4 Overhead Monitor.. 4 Remote Control.. 4

Information

In Case of Difculty.. 12 Remote Control Battery Replacement. 12 Accessories... 13 Specications.. 13

Overhead Monitor Control

Screen Display ON/OFF.. 5 Audio Mute Function.. 5 Adjusting the Volume.. 5 Switching the Source... 5 Setting the Backlight Brightness.. 5 Adjusting Picture.. 6 Adjusting Brightness.. 6 Adjusting Color Density.. 6 Adjusting Tint.. 6 Adjusting Contrast. 6 Adjusting Sharpness.. 7 Resetting the Picture Adjustment. 7 Switching Display Mode.. 7 Visual EQ Operation... 8 System Setup Operation. 9
Installation and Connections

WARNING

DVD Player Control
Playing and Pausing.. 10 Stopping... 10 Skipping Forward.. 10 Skipping Backward... 10 Selecting Menu.. 10 DVD Setup Operation.. 10
WARNINGS.. 14 CAUTION.. 14 PRECAUTIONS.. 14 Installation and Connections.. 14 Power Connections.. 15 Dome Light Connection.. 16 System Connections.. 17
PKG-1000P_EN.indd EN1 5/17/2005 1:39:34 PM

WARNINGS

This symbol means important instructions. Failure to heed them can result in serious injury or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. If the product is not installed correctly, the driver will be able to watch the TV/Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured.

DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, re or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in re, electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in re or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in re.
PKG-1000P_EN.indd EN2 5/17/2005 1:39:35 PM

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized ALPINE dealer or the nearest ALPINE Service Center for repairing.

PRECAUTIONS

Temperature
Be sure the temperature inside the vehicle is between +60C (+140F) and -10C (+14F) before turning your unit on.

Fuse Replacement

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder. If the fuse(s) blows more than once, carefully check all electrical connections for shorted circuitry. Also have your vehicles voltage regulator checked.
KEEP FINGERS OR ANY OBJECT AWAY WHEN CLOSING THE MONITOR.
Failure to do so may result in personal injury or damage to the product.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your ALPINE dealer or the nearest ALPINE Service Station for servicing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+ and ) as instructed. Rupture or chemical leakage from the battery may cause re or personal injury.

Installation Location

Make sure the TMX-R1000P will not be exposed to: Direct sun and heat Excessive dust High humidity Excessive vibrations
Characteristics of LCD Panel
After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal. The LCD panel is manufactured using an extremely high precision manufacturing technology. Its effective pixel ratio is over 99.99%. This means that 0.01% of the pixels could be either always ON or OFF.
Using Wireless Headphones
If ACC or the monitor's power source is turned off, a loud noise is produced through the headphones. Be sure to remove the wireless headphones from your ears before you turn the monitor off.
PKG-1000P_EN.indd EN3 5/17/2005 1:39:35 PM

LCD Monitor Panel

Features
The ALPINE TMX-R1000P provides the following 10.2 inch Wide VGA TFT Active Matrix Color LCD (800 x 480) 3 AUX In / 1 AUX Out 1 Remote In / 2 Remote Out Front Panel Controls (OHM / DVD / DVD-HU / TV Tuner) Visual EQ (FLAT, NIGHT MOVIE, SOFT, SHARP, CONTRAST) Independent parameter setting on each AUX input (Picture/Visual EQ/Audio Input Level/Display Mode) 3 Level Dimmer (HIGH/MID/LOW) CH Selectable IR Transmitter for IR Headphones (A/B/OFF) DVD Power Control Customized OSD Source Name White LED Dome Light

This is a 10.2 inch, Wide VGA, Active Matrix LCD. In addition, an Infrared Wireless Headphone Transmitter is located on top of the LCD panel. The power state of the monitor is memorized when Ignition/ACC is turned off. When Ignition/ACC is turned back on, the monitor returns to the power state memorized (either ON or OFF).

Monitor Open Button

Press Monitor Open Button to release the Monitor Panel. The Panel will drop down slightly allowing you to fully open to its 90 degree or greater position. To close, rmly press the LCD Monitor Panel back up into the housing until a click is heard.

White LED Dome Light

White LED Dome Light connection has polarity. Be cautious when installing the monitor. Refer to Dome Light Connection (Page 16).
Back-Lit Function Buttons
Blue, back-lit function button illuminates when the overhead monitor main power is on. Overhead monitor, DVD player, DVD-HU and TV tuner can be controlled by using these buttons.
Remote Control Overhead Monitor
White LED Dome Light TMX-R1000P Overhead Monitor Control
Infrared Wireless Headphone Transmitter LCD Monitor Panel ALPINE DVD Player Control (Refer to DVA-5210 or DVE-5207 Owners Manual)

Back-Lit Function Button

Aux 3 Input ALPINE TV-Tuner Control (Refer to ALPINE TVTuner Owners Manual)
When you use Remote Control for the rst time, pull the plastic tape before using the remote control.

Dome Light Switch

PKG-1000P_EN.indd EN4 5/17/2005 1:39:36 PM

POWER SELECT DIMMER

Adjusting the Volume
Volume can be controlled from the headphone or your own radio volume function.
Turn on POWER on the headphone. Adjust the volume level by turning clockwise for louder and counter-clockwise for lower on the headphone. Refer to Wireless Headphone (Page 11)

Switching the Source

Front Panel Controls POWER

SELECT DIMMER

Press SEL on the remote control or SELECT on the Front Panel Controls to change each source. Press SEL/SELECT to switch to the different sources.

Remote Control

Screen Display ON/OFF

Front Panel Controls

To turn off the power, press and hold POWER again. While the power is ON, press POWER to activate the Mute function.
Inside ( ) is default setting. The source name is selectable. When it is OFF, the source will be skipped. OSD (On Screen Display) will be turned off automatically, when not operating more than 10 seconds.
Setting the Backlight Brightness
The brightness of the LCD panels backlighting is adjustable to more closely match the vehicles interior lighting. This makes the screen easier to view.

Press POWER to turn ON.

Press DIMMER. Press DIMMER to cycle through the OSD as HIGH, MID, LOW and HIGH. (Default: HIGH)
Press POWER to turn ON. To turn off the power, press POWER again

Audio Mute Function

While the power is ON, press POWER to activate the Mute function. Press POWER again turn it OFF the Mute function.
Press MUTE to turn it ON and OFF.
PKG-1000P_EN.indd EN5 5/17/2005 1:39:39 PM

Adjusting Picture

Brightness, color, tint, contrast and sharpness can be adjustable. Each source can be adjustable individually. Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off. When the adjustment is made, FLAT setting in Visual EQ changes to CUSTOM. After reset, CUSTOM changes back to FLAT

Adjusting Color Density

Press or and select COLOR. Press or to adjust the color density. Change depth can be adjusted from 15 (MIN) to +15 (MAX).
Press and hold the SELECT button for at least 2 seconds to open SETUP screen. Make sure the PICTURE display mode is selected.

SELECT

Press ENT to nish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically.

Adjusting Tint

Press or and select TINT. Press or to adjust the tint. Tint tone can be adjusted from G15 (G MAX) to R15 (R MAX).

Adjusting Brightness

Press or and select BRIGHT. Press or to adjust the brightness. Brightness can be adjusted from 15 (MIN) to +15 (MAX).

Adjusting Contrast

Press the ENT button to nish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically.
Press or and select CONTRAST. Press or to adjust the contrast. Contrast can be adjusted from 15 (LOW) to +15 (HIGH).
PKG-1000P_EN.indd EN6 5/17/2005 1:39:40 PM

Adjusting Sharpness

Press or and select SHARPNESS. Press or to adjust the screen quality. Screen quality can be adjusted from -15 (SOFT) to +15 (HARD).
Press and hold SELECT for at least 2 seconds to show the SETUP menu. Press SELECT to switch to DISP MODE from PICTURE. To change each mode, press or.
Each press changes the display modes as follows:
Resetting the Picture Adjustment
Press or and select RESET. WIDE Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen.

Press ENT to reset the picture adjustments. If you do not press ENT within 10 seconds, OSD disappears and the reset adjustments will not be saved.

Switching Display Modes

Display mode on the screen can be adjusted to Wide, Zoom, Cinema and Normal. Each source can be adjustable individually. Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off.
ZOOM Normal images are expanded in the horizontal direction and are displayed over the entire screen. The expansion ratio increases towards the right and left edges of the screen.
CINEMA Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image are cut off. This mode is suited for 16:9 cinema size images.
NORMAL Normal image (4:3)
PKG-1000P_EN.indd EN7 5/17/2005 1:39:45 PM

VISUAL EQ Operation

You can select a mode suitable for the subject image. Each source can be adjustable individually. Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off.

DIMMER

Press and hold DIMMER for at least 2 seconds to show the VISUAL EQ OSD. To change VISUAL EQ, press DIMMER or press or to cycle through the OSD as FLAT, NIGHT MOVIE, SOFT, SHARP, HIGHT CONT, and FLAT. (Default: SHARP)
VISUAL EQ mode (manufacturers settings) selection (VISUAL EQ MODE) FLAT: Normal Setting (Visual EQ OFF) NIGHT MOVIE: Suitable for movies in which dark scenes frequently appear. SOFT: Suitable for CGs and animated lms. SHARP: Suitable for old movies where images are not clearly shown. CONTRAST: Suitable for recent movies. FLAT will change to CUSTOM, when any of the picture mode (Brightness, Color, Tint, Contrast and Sharpness) has been adjusted NIGHT MOVIE, SOFT, SHARP and CONTRAST are xed values. They cannot be set manually. If the picture mode is changed, they automatically change to CUSTOM mode. To return FLAT mode, press RESET on the picture mode, or change values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS to 0 manually.

PKG-1000P_EN.indd EN8 5/17/2005 1:39:50 PM

System Setup Operation

IR transmitter, source names and Audio levels can be adjusted for all available sources. Once this adjustment is made, all sources are affected.

SELECT ENT

AUDIO LEVEL 2 (Setting for Aux2): Press and to select HIGH/MID/LOW. (Default: HIGH) AUDIO LEVEL 3 (Setting for Aux3): Press and to select HIGH/MID/LOW. (Default: HIGH) FACTORY DEFAULT: Press ENT Key, the system changes to Factory Default System Setting. Entire settings include Picture, Visual EQ, Display Mode are also reset.

Front Panel Controls ENT

Customizing Source Name
Your desired OSD source name can be dened up to 6 characters.

to select USER.

Press ENT key. Character setting menu appears. Press and ENT key to select the character A-Z, 0-9, -, space and. DEL: Delete one character at a time. CLR: Clear entire characters. OK: Conrm source name and exit from character setting menu.
Press and hold SELECT for at least 2 seconds to show the SETUP menu. Press SELECT twice to switch to SYSTEM screen.
This setting will not disappear until selecting OK to exit the screen.
Press or to change each mode

IR TRANS: Press and

to select A/B/OFF. (Default: A)
SOURCE NAME 1: Press and to select AUX1/DVD/DVD-HU/TV/ GAME/USER (Default: DVD) SOURCE NAME 2: Press and to select AUX2/DVD/DVD-HU/TV/ GAME/USER/OFF* (Default: TV) SOURCE NAME 3: Press and to select AUX3/GAME/USER/OFF* (Default: GAME) When OFF is selected, source selection skips to the next input. (AUX1 cannot be turned OFF.) AUDIO LEVEL 1 (Setting for Aux1): Press and to select HIGH/MID/LOW. (Default: HIGH)
PKG-1000P_EN.indd EN9 5/17/2005 1:39:51 PM
To control the DVD player and DVD-HU from the Front Panel Controls, set source names to DVD and DVD-HU in the System Setup. Refer to ALPINE DVD Player/DVD Changer/DVD Head Unit Operation Manual for details.

MENU ENT

Skipping Backward
Press to skip back to the previous chapter or track. Press and hold to fast reverse movie or music.

Selecting Menu

Press MENU to show the DVD Menu. Use and ENT to control. Press and Hold MENU to show the DVD SETUP Menu. Use and ENT to control.
Press MENU to show the DVD Menu. Use and ENT to control. When DVD is stopped, press SETUP to show the DVD SETUP Menu. Use and ENT to control.
PLAY/PAUSE SKIP BACKWARD SKIP FORWARD STOP MENU

DVD Setup Operation

The following is common for changing the settings of ALPINE DVD players. Refer to the specic ALPINE DVD Player/DVD Changer/DVD Head Unit Operation Manual for more detailed information.
Remote Control RUE-4155 cannot be used for ALPINE DVD Head Unit. It is for DVD player only. To control the DVD Head Unit, use the remote control included in DVD Head Unit or ALPINE universal remote control RUE-4191.

Playing and Pausing

Press / to play movie or music. Press to pause. / again
While in stop mode, press and hold MENU for at least 2 seconds. MENU on Front Panel Controls can be used for DVD Changer and DVD Head Unit ONLY, not for DVD Player The setup menu appears on the monitor.

Stopping

Press to stop movie. PRE-STOP appears on the screen by single click. Press one more time, STOP appears on the screen.

Skipping Forward

Press to skip ahead to the next chapter or track. Press and hold to fast forward movie or music.
Press SETUP when in stop mode.

PKG-1000P_EN.indd EN10

The setup menu appears on the monitor.

5/17/2005 1:40:16 PM

TV Tuner Control
To control TV tuner from the Front Panel Controls, set source name to TV in the System Setup. Refer to ALPINE TV Tuner Operation Manual for details.

Headphone Receivers

1) Infrared Sensors; Receive signal from the transmitter. 2) Battery Cover 3) Volume Control 4) Power Switch 5) Power Indicator LED

Selecting Preset Channel

Press CH or CH to select preset channel memorized by SCAN on the remote control or ENT on the Front Panel Controls.

Operation

Read carefully to prevent damage to the headphone or your ears: WARNING: Before turning on the power, remove headphones and turn the volume down as low as possible. 1) Be sure the batteries are properly installed in the headphones. 2) Turn the headphones volume completely down before placing it on your ears and turning on the power. 3) Turn on the headphone power and adjust the headphone volume to a comfortable level (You can increase the audio source volume if needed).

Seeking Channel Manually

Press or to seek Channel manually. Channel moves UP or DOWN one by one. or , Channel Seek will start Press and Hold and stop when next higher or lower available CH is found.

Memorizing Channel

Press SCAN on the remote control or ENT on the Front Panel Controls to memorize the receivable channels in the entire TV broadcast band.

Battery Installation

Place two AAA batteries into the battery compartment of the headphone(s), making sure that the battery polarity is correct.
PKG-1000P_EN.indd EN11 5/17/2005 1:40:21 PM

In Case of Difculty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized ALPINE dealer.
Remote Control Battery Replacement
Battery type: CR2025 battery or equivalent.

Opening the battery case Slide out the battery cover while rmly pressing in the direction of the arrow.

No function or display.

Car's ignition is off. - Turn the ignition on. No fuse or blown fuse. - Check the cause and replace the fuse. Incorrect connections. - Check connection and remedy. Vehicle's battery is weak. - Check the voltage of vehicle's battery.

No picture display.

Brightness control is set for minimum brightness control. - Adjust the brightness. Incorrect setting of the mode. - Switch to the correct mode. - Check the connection to the source unit. - Check the power of the source unit. Incorrect or open connection with the Monitor, AV interface unit. - Check the connection and remedy.
Replacing the battery Put the battery in the case with the (+) indication upward as shown in the illustration. Placing a battery in backwards way may cause a malfunction.

Picture color is poor.

Brightness/Color/Tint/Contrast/Sharpness control are not set to the proper positions. - Check each control.
Spots or dotted lines/stripes appear.
Caused by neon signs, high-voltage power lines, CB transmitter, other vehicle's ignition plugs, etc. - Change the location of your vehicle.
Closing the cover Slide the cover as illustrated until a click is heard.

Unit does not operate.

Monitor's power is not turned on. - Turn on the monitor's power.
Due to continuous product improvement, specications and design are subject to change without notice.

Warning

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
PKG-1000P_EN.indd EN12 5/17/2005 1:40:25 PM

Accessories

Check accessory parts.
DIN Cable (8 pin / 5m) Power Supply Connector Hideaway AV Box

Specications

Video Display System NTSC/PAL Compatibility

DISPLAY SCREEN

Size Width Height Aspect Ratio Type 10.2 221mm (8.70) 132mm (5.20) 16:9 Transparent type TN Liquid Crystal Display TFT-LCD, Active Matrix 800(W) x 480(H) x 3 1.152M pixels (VGA) 99.9% or more Cold Cathode Fluorescent Lamp
X1 RUE-4155 Universal Remote Control SHS-N100 Single Source Wireless IR Headphone
X1 Installation Bracket*1
System Number of Elements Effective Number of Elements Back Light

GENERAL

Operating Voltage
X1 Trim Ring*2 X1 Screws (for Installation Bracket) X1 Screws (for Trim Ring)
Power Consumption Video Input Audio Input IR Transmitter Operating Temperature
V DC (Typical: 12V) 1.12A (Power On) 140mA (Stand by) 1.0V p-p 75ohm 2.0V rms (max) CH A: 2.3MHz / 2.8MHz CH B: 3.2 MHz / 3.8MHz +14 F to +140 F (-10 C to + 60 C)

X1 AAA Battery

X4 Battery , CR2025 (Included in Remote control)

MONITOR

Width Height Depth Weight 286 mm (11.26) 36 mm (1.42) 287 mm (11.30) 1.6Kg (3lbs. 8.4 oz.)

AV BOX

X2 10.2 inch WVGA LCD Monitor X1
Width Height Depth Weight
70[84] mm (2.76[3.31]) 21 mm (0.83) 92[112] mm (3.62[4.41]) 220g (7.8 oz)
Installation of Bracket and Trim Ring
*1 Installation Bracket is used to stabilize the monitor at the time of installing the monitor. Ask ALPINE dealer for detail.
*2 Trim Ring is used to make the monitor suitable to your vehicles ceiling shape at the time of installing the monitor. Ask ALPINE dealer for detail.
PKG-1000P_EN.indd EN13 5/17/2005 1:40:27 PM
Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in re or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in re.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the rear of the monitor or on the bottom of the AV interface unit.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG.
If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries.
SERIAL NUMBER: ____________________________ INSTALLATION DATE: _________________________ INSTALLATION TECHNICIAN: __________________ PLACE OF PURCHASE: _______________________
PKG-1000P_EN.indd EN14 5/17/2005 1:40:35 PM

Power Connections

ALPINE's TMX-R1000P needs the following power connections to assure proper operation of the monitor.
ACC Red Connect this line to the vehicle's ACC line. (Switched 12V, ignition)
GND Black Connect this line to the vehicle's GND line.
POWER CONTROL Connect this line to the ALPINE DVD player's ACC line, which is red. It controls turning the power ON/OFF for the ALPINE DVD player only when AUX1 (source 1) is set to DVD.

Blue/White

REMOTE OUT 1 White/Brown Corresponds to AUX1. To control ALPINE DVD player, TV tuner or DVD-HU, connect to each REMOTE IN.
REMOTE OUT 2 White/Brown Corresponds to AUX2. To control ALPINE DVD player, TV tuner or DVD-HU, connect to each REMOTE IN.
REMOTE IN 1. ACC 2. GND 3. POWER CONTROL 4. REMOTE IN 5. REMOTE OUT 1 6. REMOTE OUT 2 Red Black Blue/White White/Brown White/Brown White/Brown To control ALPINE DVD player, TV tuner or DVD-HU from LCD monitor in the front area of the vehicle, connect this line to the ALPINE LCD monitor REMOTE OUT.

White/Brown

PKG-1000P_EN.indd EN15 5/17/2005 1:40:36 PM

Dome Light Connection

Polarity +
When door open Vehicle Door signal is 12V
Vehicle Door SW Door Closed

Dome Light Wire

Door Open
This wire connects the built-in Dome Light to the cable from the vehicles Dome Light Switch.

(Red) (Black)

(Green)

Game Port

Polarity

Micro SW

To Game Port To Micro SW To Slim Box J3 J1

When door open

Door signal is GND

Vehicle

Power PCB

J8 S2 S1 J5

To Driver Board
S2 Door + SW Lamp J13 CON

Lamp SW S1

Lamp PCB
Polarity change switch is located on the top surface that mounts into the headliner. Vehicle Door polarity depends on the vehicle type. The polarity can be changed by the Door SW polarity switch. (Default: Negative Switched System) Polarity +: When door open, door signal is 12V Polarity -: When door open, door signal is GND
PKG-1000P_EN.indd EN16 5/17/2005 1:40:37 PM

System Connections

ALPINE Mobile Multimedia Station ALPINE Mobile Cinema Monitor

AUX IN

REM. OUT REM. IN REM. OUT 2 POWER CONT. REM. OUT1

Camcorder

OR AUX OUT

Game Player

AUX 2 IN

AUX 1 IN

ALPINE TV Tuner

REM. IN

BATT. GND

ALPINE DVD Player

GND ACC
1. ACC 2. GND 3. POWER CONTROL 4. REMOTE IN 5. REMOTE OUT 1 6. REMOTE OUT 2
Red Black Blue/White White/Brown White/Brown White/Brown
PKG-1000P_EN.indd EN17 5/17/2005 1:40:40 PM

3 5 5.
IR TRANS (-): //OFF. ( : ). SOURCE NAME 1 ( 1): AUX1/DVD/DVD-HU/TV/GAME/USER. ( : DVD). SOURCE NAME 2 ( 2): AUX2/DVD/DVD-HU/TV/GAME/USER/OFF*. ( : TV). SOURCE NAME 3 ( 3): AUX3/GAME/USER/OFF*. ( : GAME). * - OFF ( AUX1 OFF ).
AUDIO LEVEL 1 ( AUX1): : HIGH () / MID () / LOW (). ( : HIGH). AUDIO LEVEL 2 ( AUX2): : HIGH () / MID () / LOW (). ( : HIGH). AUDIO LEVEL 3 ( AUX3): : HIGH () / MID () / LOW (). ( : HIGH). FACTORY DEFAULT ( ): ENT. , . , , . 15

, 6.

4 USER. 5 ENT. . 6 5, 3, 3, 3 ENT, (AZ), (0-9), (-), (.). DEL: CLR: OK: . . .

OK.

DVD- DVD- (SYSTEM SETUP) , . DVD- / DVD- / DVD ALPINE.
RUE-4155 DVD- ALPINE. DVD-. DVD- ALPINE RUE-4191.

6. .

7. PRE-STOP. 7 STOP.

4 . 4.

DVD, MENU. DVD 5, 5, 2, 3 ENT. DVD- MENU. 5, 5, 2, 3 ENT. DVD, MENU. DVD 5, 5, 2, 3 ENT. DVD- SETUP. 5, 5, 2, 3 ENT.

DVD-

DVD- ALPINE. DVD- / DVD- / DVD ALPINE.
DVD- 2- MENU. MENU DVD- DVD-, DVD. (SETUP).

DVD- SETUP. .

, . ALPINE.

5 5, , SCAN ENT .

. , .

SCAN ENT .

1) 2) 3) 4) 5)

- . . . . .

. : , , . 1) . 2) , , . 3) . ( ).

, .

, , . . , Alpine. . . - . . - . . - .

. - .

. . - . . - . - . - /. - . . / / / . - . / , -, . - . . . - .

: CR2025 .

, .

(+) , . 21

, , .

.

. , , . .

DIN (8pin/5) AV-

RUE-4155

SHS-N100

CR2025 ( )

10,2`` WVGA LCD

10-16 . (.: 12) 1,12 (Power On) 140 (Stand-by) 23 10,2`` 16:9 800 () 480 () (VGA) 99,9% NTSC/PAL

- AV-

1,0 -, 75 2,0 rms (.) : 2,3 / 2,8 : 3,2 / 3,8 - 10 +60

287 1,6

70 [84] [112] 220

*1 . ALPINE.