PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130
Internet store of autogoods
ICQ 294-0-130 597-0-130 SKYPE km-130
CAR RECEIVERS Receivers Media receivers and stations Native receivers CD/DVD changers FM-modulators/USB adapters Flash memory Facia plates and adapters Antennas Accessories | CAR AUDIO Car audio speakers Amplifiers Subwoofers Processors Crossovers Headphones Accessories | TRIP COMPUTERS Universal computers Model computers Accessories | GPS NAVIGATORS Portable GPS Built-in GPS GPS modules GPS trackers Antennas for GPS navigators Accessories | VIDEO DVR TV sets and monitors Car TV tuners Cameras Videomodules Transcoders Car TV antennas Accessories | SECURITY SYSTEMS Car alarms Bike alarms Mechanical blockers Immobilizers Sensors Accessories | OPTIC AND LIGHT Xenon Bixenon Lamps LED Stroboscopes Optic and Headlights Washers Light, rain sensors Accessories | PARKTRONICS AND MIRRORS Rear parktronics Front parktronics Combined parktronics Rear-view mirrors Accessories | HEATING AND COOLING Seat heaters Mirrors heaters Screen-wipers heaters Engine heaters Auto-refrigerators Air conditioning units Accessories | TUNING Vibro-isolation Noise-isolation Tint films Accessories | ACCESSORIES Radar-detectors Handsfree, Bluetooth Windowlifters Compressors Beeps, loudspeakers Measuring instruments Cleaners Carsits Miscellaneous | MOUNTING Installation kits Upholstery Grilles Tubes Cable and wire Tools Miscellaneous | POWER Batteries Converters Start-charging equipment Capacitors Accessories | MARINE AUDIO AND ELECTRONICS Marine receivers Marine audio speakers Marine subwoofers Marine amplifiers Accessories | CAR CARE PRODUCTS Additives Washer fluid Care accessories Car polish Flavors Adhesives and sealants | LIQUID AND OIL Motor oil Transmission oil Brake fluid Antifreeze Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in Kyiv and other cities, delivery by ground and postal services. Our experienced consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address

http://130.com.ua

PKG-850P Rear Seat Entertainment Package
Systme de divertissement pour les siges arrire Paquete de entretenimiento para asientos traseros Entertainment-Paket fr den Rcksitz Sistema di intrattenimento per sedili posteriori Underhllningspaket fr bakste
OWNER'S MANUAL Please read before using this equipment. MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. MANUAL DE OPERACIN Lalo antes de utilizar este equipo.
BEDIENUNGSANLEITUNG Bitte vor Gebrauch des Gertes lesen. MANUALE DI ISTRUZIONI Si prega di leggere il manuale prima di usare il sistema. HANDBOK Ls denna handbok innan du anvnder utrustningen.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda Shinagawa-ku Tokyo 141-0031, Japan Phone 03-5496-8231
ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD.
161-165 Princess Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 280) 98, Rue de la Belle Etoile, Z.I. paris Nord II, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989
ALPINE ELECTRONICS GmbH ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place Torrance, California 90501 U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) Frankfurter Ring 117, 80807 Mnchen, Germany Phone 089-640

ntents

WARNINGS.. 2 CAUTION... 3 PRECAUTIONS.. 3

Wireless Headphone

Headphone Receivers..11 Operation...11 Battery Installation..11

Monitor Features

Features... 4 Overhead Monitor.. 4 Remote Control.. 4

Information

.. 12 Remote Control Battery Replacement. 12 Accessories... 13

Overhead Monitor Control

Screen Display ON/OFF.. 5 Audio Mute Function.. 5 Adjusting the Volume.. 5 Switching the Source... 5 Setting the Backlight Brightness.. 5 Adjusting Picture.. 6 Adjusting Brightness.. 6 Adjusting Color Density.. 6 Adjusting Tint.. 6 Adjusting Contrast. 6 Adjusting Sharpness.. 7 Resetting the Picture Adjustment. 7 Switching Display Mode.. 7 Visual EQ Operation... 8
Installation and Connections

WARNING

WARNINGS.. 14 CAUTION.. 14 PRECAUTIONS.. 14 Installation and Connections.. 14 Power Connections.. 15 Dome Light Connection.. 16 System Connections.. 17
System Setup Operation. 9

DVD Player Control

Playing and Pausing.. 10 Stopping... 10 Skipping Forward.. 10 Skipping Backward... 10 Selecting Menu.. 10 DVD Setup Operation.. 10

WARNINGS

This symbol means important instructions. Failure to heed them can result in serious injury or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. If the product is not installed correctly, the driver will be able to watch the TV/Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result

07.12.2006 11:57:39 Uhr

CAUTION
This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized ALPINE dealer or the nearest ALPINE Service Center for repairing.

PRECAUTIONS

Temperature
Be sure the temperature inside the vehicle is between +60C (+140F) and -10C (+14F) before turning your unit on.

Fuse Replacement

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder. If the fuse(s) blows more than once, carefully check all electrical connections for shorted circuitry. Also have your vehicles voltage regulator checked.
KEEP FINGERS OR ANY OBJECT AWAY WHEN CLOSING THE MONITOR.
Failure to do so may result in personal injury or damage to the product.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your ALPINE dealer or the nearest ALPINE Service Station for servicing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+ and ) as instructed. personal injury.

Installation Location

Make sure the TMX-R850 will not be exposed to: Direct sun and heat Excessive dust High humidity Excessive vibrations
Characteristics of LCD Panel
After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal. The LCD panel is manufactured using an extremely high precision manufacturing technology. Its effective pixel ratio is over 99.99%. This means that 0.01% of the pixels could be either always ON or OFF.
Using Wireless Headphones

If ACC or the monitor's power source is turned off, a loud noise is produced through the headphones. Be sure to remove the wireless headphones from your ears before you turn the monitor off.

PKG-850P_EN.indd 3

LCD Monitor Panel

Features

The ALPINE TMX-R850 provides the following 8.5 inch TFT Active Matrix Color LCD (480 x 234) 2 AUX In / 1 AUX Out 1 Remote In / 2 Remote Out Front Panel Controls (OHM / DVD / DVD-HU / DVB-T/TV Tuner) Visual EQ (FLAT, NIGHT MOVIE, SOFT, SHARP, CONTRAST) Independent parameter setting on each AUX input (Picture/Visual EQ/Audio Input Level/Display Mode) 3 Level Dimmer (HIGH/MID/LOW) CH Selectable IR Transmitter for IR Headphones (A/B/OFF) DVD Power Control Customized OSD Source Name White LED Dome Light
This is a 8.5 inch, Active Matrix LCD. In addition, an Infrared Wireless Headphone Transmitter is located on top of the LCD panel. The power state of the monitor is memorized when Ignition/ACC is turned off. When Ignition/ACC is turned back on, the monitor returns to the power state memorized (either ON or OFF).

Monitor Open Button

Press Monitor Open Button to release the Monitor Panel. The Panel will drop down slightly allowing you to fully press the LCD Monitor Panel back up into the housing until a click is heard.

White LED Dome Light

White LED Dome Light connection has polarity. Be cautious when installing the monitor. Refer to Dome Light Connection (Page 16).
Back-Lit Function Buttons
Blue, back-lit function button illuminates when the overhead monitor main power is on. Overhead monitor, DVD player, DVD-HU and DVB-T/TV tuner can be controlled by using these buttons.

Overhead Monitor

Infrared Wireless Headphone Transmitter

DIGITAL TV

Remote Control
TMX-R850 Overhead Monitor Control

Back-Lit Function Button

ALPINE DVD Player Control (Refer to DVA-5210 or DVE-5207 Owners Manual)
ALPINE DVB-T-Tuner Control (Refer to ALPINE DVB-T-Tuner Owner's Manual) ALPINE TV-Tuner Control (Refer to ALPINE TVTuner Owners Manual)

Dome Light Switch

plastic tape before using the remote control.

PKG-850P_EN.indd 4

07.12.2006 11:57:40 Uhr

POWER SELECT DIMMER

Adjusting the Volume
Volume can be controlled from the headphone or your own radio volume function.
Turn on POWER on the headphone. Adjust the volume level by turning clockwise for louder and counter-clockwise for lower on the headphone. Refer to Wireless Headphone (Page 11)

Switching the Source

Front Panel Controls POWER

SELECT DIMMER

Press SEL on the remote control or SELECT on the Front Panel Controls to change each source. Press SEL/SELECT to switch to the different sources.

Screen Display ON/OFF

Front Panel Controls
To turn off the power, press and hold POWER again. While the power is ON, press POWER to activate the Mute function.

Press POWER to turn ON.

Inside ( ) is default setting. The source name is selectable. When it is OFF, the source will be skipped. OSD (On Screen Display) will be turned off automatically, when not operating more than 10 seconds.
Setting the Backlight Brightness
The brightness of the LCD panels backlighting is adjustable to more closely match the vehicles interior lighting. This makes the screen easier to view. Press DIMMER. Press DIMMER to cycle through the OSD as HIGH, MID, LOW and HIGH. (Default: HIGH)
To turn off the power, press POWER again

Audio Mute Function

While the power is ON, press POWER to activate the Mute function. Press POWER again turn it OFF the Mute function.
Press MUTE to turn it ON and OFF.

PKG-850P_EN.indd 5

07.12.2006 11:57:42 Uhr

Adjusting Picture

Brightness, color, tint, contrast and sharpness can be adjustable. Each source can be adjustable individually. Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off. When the adjustment is made, FLAT setting in Visual EQ changes to CUSTOM. After reset, CUSTOM changes back to FLAT

Adjusting Color Density

and select COLOR.
Press or to adjust the color density. Change depth can be adjusted from 15 (MIN) to +15 (MAX).

Press and hold the SELECT button for at least 2 seconds to open SETUP screen. Make sure the PICTURE display mode is selected.

SELECT

Press ENT to nish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically.

Adjusting Tint

Adjusting Brightness

and select BRIGHT.

Press or to adjust the brightness. Brightness can be adjusted from 15 (MIN) to +15 (MAX).

Press or

Press or to adjust the tint. Tint tone can be adjusted from G15 (G MAX) to R15 (R MAX).

and select TINT.

Adjusting Contrast
and select CONTRAST. Press or to adjust the contrast. Contrast can be adjusted from 15 (LOW) to +15 (HIGH).
Press the ENT button to nish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically.

PKG-850P_EN.indd 6

07.12.2006 11:57:44 Uhr

Adjusting Sharpness

and select SHARPNESS.
Press and hold SELECT for at least 2 seconds to show the SETUP menu. Press SELECT to switch to DISP MODE from PICTURE. To change each mode, press or.
Press or to adjust the screen quality. Screen quality can be adjusted from -15 (SOFT) to +15 (HARD).
Each press changes the display modes as follows:
Resetting the Picture Adjustment

and select RESET.

Press ENT to reset the picture adjustments. If you do not press ENT within 10 seconds, OSD disappears and the reset adjustments will not be saved.

Switching Display Modes

Display mode on the screen can be adjusted to Wide, Zoom, Cinema and Normal. Each source can be adjustable individually. Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off.
WIDE Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen.
ZOOM Normal images are expanded in the horizontal direction and are displayed over the entire screen. The expansion ratio increases towards the right and left edges of the screen.
CINEMA Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image are cut off. This mode is suited for 16:9 cinema size images.

NORMAL Normal image (4:3)

PKG-850P_EN.indd 7

07.12.2006 11:57:47 Uhr

VISUAL EQ Operation

You can select a mode suitable for the subject image. Each source can be adjusted individually. Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off.

DIMMER

Press and hold DIMMER for at least 2 seconds to show the VISUAL EQ OSD. To change VISUAL EQ, press DIMMER or press or to cycle through the OSD as FLAT, NIGHT MOVIE, SOFT, SHARP, HIGHT CONT, and FLAT. (Default: SHARP)
VISUAL EQ mode (manufacturers settings) selection (VISUAL EQ MODE) FLAT: Normal Setting (Visual EQ OFF) NIGHT MOVIE: Suitable for movies in which dark scenes frequently appear. SOFT: Suitable for CGs and animated movies. SHARP: Suitable for old movies where images are not clearly shown. CONTRAST: Suitable for recent movies. FLAT will change to CUSTOM, when any of the picture modes (Brightness, Color, Tint, Contrast and Sharpness) has been adjusted. NIGHT MOVIE, SOFT, SHARP and CONTRAST picture mode is changed, they automatically change to CUSTOM mode. To return FLAT mode, press RESET on the picture mode, or change values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS to 0 manually.

PKG-850P_EN.indd 8

System Setup Operation
IR transmitter, source names and Audio levels can be adjusted for all available sources. Once this adjustment is made, all sources are affected.

SELECT ENT

AUDIO LEVEL 2 (Setting for Aux2): Press and to select HIGH/MID/LOW. (Default: HIGH) FACTORY DEFAULT: Press ENT Key, the system changes to Factory Default System Setting. Entire settings including Picture, Visual EQ, Display Mode are also reset.

Customizing Source Name

Front Panel Controls ENT

characters.

to select USER.
Press ENT key. Character setting menu appears. Press and ENT key to select the characters A-Z, 0-9, -, space and. DEL: CLR: OK: Delete one character at a time. Clear entire characters. Conrm source name and exit from character setting menu.
Press and hold SELECT for at least 2 seconds to show the SETUP menu. Press SELECT twice to switch to SYSTEM screen. the screen.

to change each mode

IR TRANS: Press and
to select A/B/OFF. (Default: A)
SOURCE NAME 1: Press and to select AUX1/DVD/DVD-HU/ DVB-T/TV/GAME/USER (Default: DVD) SOURCE NAME 2: Press and to select AUX2/DVD/DVD-HU/ DVB-T/TV/GAME/USER/OFF* (Default: DVB-T) * When OFF is selected, source selection skips to AUDIO LEVEL 1 (Setting for Aux1): Press and to select HIGH/MID/LOW. (Default: HIGH)

PKG-850P_EN.indd 9

07.12.2006 11:57:49 Uhr
To control the DVD player and DVD-HU from the Front Panel Controls, set source names to DVD and DVD-HU in the System Setup. Refer to ALPINE DVD Player/DVD Changer/DVD Head Unit Operation Manual for details.

MENU ENT

Skipping Backward
Press to skip back to the previous chapter or track. Press and hold to fast reverse movie or music.

Selecting Menu

Press MENU to show the DVD Menu. Use and ENT to control. Press and Hold MENU to show the DVD SETUP Menu. Use and ENT to control.
Press MENU to show the DVD Menu. Use and ENT to control. When DVD is stopped, press SETUP to show the DVD SETUP Menu. Use and ENT to control.
PLAY/PAUSE SKIP BACKWARD SKIP FORWARD STOP MENU

DVD Setup Operation

Remote Control RUE-4152 cannot be used for ALPINE DVD Head Unit. It is for DVD player only. To control the DVD Head Unit, use the remote control included in DVD Head Unit or ALPINE universal remote control RUE-4191.

Playing and Pausing

Press / to play movie or music. Press to pause.
The following is common for changing the settings of ALPINE DVD players. Changer/DVD Head Unit Operation Manual for more detailed information.
While in stop mode, press and hold MENU for at least 2 seconds. MENU on Front Panel Controls can be used for DVD Changer and DVD Head Unit ONLY, not for DVD Player. The setup menu appears on the monitor.

Stopping

Press to stop movie. PRE-STOP appears on the screen by single click. Press one more time, STOP appears on the screen.

Skipping Forward

Press to skip ahead to the next chapter or track. Press and hold to fast forward movie or music.
Press SETUP when in stop mode.

PKG-850P_EN.indd 10

The setup menu appears on the monitor.

07.12.2006 11:57:50 Uhr

DVB-T/TV Tuner Control
To control DVB-T/TV tuner from the Front Panel Controls, set source name to DVB-T/TV in the System Setup. Refer to ALPINE DVB-T/TV Tuner Operation Manuals for details.

Headphone Receivers

1) Infrared Sensors; Receive signal from the transmitter. 2) Battery Cover 3) Volume Control 4) Power Switch 5) Power Indicator LED

Selecting Preset Channel

Press CH or CH to select preset channel memorized by ENT on the Front Panel Controls.

Operation

Read carefully to prevent damage to the headphone or your ears: WARNING: Before turning on the power, remove headphones and turn the volume down as low as possible. 1) Be sure the batteries are properly installed in the headphones. 2) Turn the headphones volume completely down before placing it on your ears and turning on the power. 3) Turn on the headphone power and adjust the headphone volume to a comfortable level (You can increase the audio source volume if needed).

Battery Installation

Place two AAA batteries into the battery compartment of the headphone(s), making sure that the battery polarity is correct.

PKG-850P_EN.indd 11

07.12.2006 11:57:52 Uhr

In Case of Difculty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized ALPINE dealer.
Remote Control Battery Replacement
Battery type: CR2025 battery or equivalent.
Opening the battery case Slide out the battery cover while rmly pressing in the direction of the arrow.

No function or display.

Car's ignition is off. - Turn the ignition on. No fuse or blown fuse. - Check the cause and replace the fuse. Incorrect connections. - Check connection and remedy. Vehicle's battery is weak. - Check the voltage of vehicle's battery.

No picture display.

Brightness control is set for minimum brightness control. - Adjust the brightness. Incorrect setting of the mode. - Switch to the correct mode. - Check the connection to the source unit. - Check the power of the source unit. Incorrect or open connection with the Monitor, AV interface unit. - Check the connection and remedy.
Replacing the battery Put the battery in the case with the (+) indication upward as shown in the illustration. Placing a battery in backwards way may cause a malfunction.

Picture color is poor.

Brightness/Color/Tint/Contrast/Sharpness control are not set to the proper positions. - Check each control.
Spots or dotted lines/stripes appear.
Caused by neon signs, high-voltage power lines, CB transmitter, other vehicle's ignition plugs, etc. - Change the location of your vehicle.
Closing the cover Slide the cover as illustrated until a click is heard.

Unit does not operate.

Monitor's power is not turned on. - Turn on the monitor's power.
Due to continuous product improvement, specications and design are subject to change without notice.

PKG-850P_EN.indd 13

07.12.2006 11:57:58 Uhr
Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.

product damage.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.
Be sure to disconnect the cable from the () battery post before installing your TMX-R850. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle's electrical system. When making connections to the cars electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the TMX-R850 to the fuse box, make sure the fuse for the intended circuit of the TMX-R850 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. The TMX-R850 uses female RCA-type jacks for connection to other units having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the rear of the monitor or on the bottom of the AV interface unit.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG.
If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries.
SERIAL NUMBER: ____________________________ INSTALLATION DATE: _________________________ INSTALLATION TECHNICIAN: __________________ PLACE OF PURCHASE: _______________________

PKG-850P_EN.indd 14

07.12.2006 11:57:59 Uhr

Power Connections

ALPINE's TMX-R850 needs the following power connections to assure proper operation of the monitor.
ACC Red Connect this line to the vehicle's ACC line. (Switched 12V, ignition)
GND Black Connect this line to the vehicle's GND line.
1. ACC 2. GND 3. POWER CONTROL 4. REMOTE IN 5. REMOTE OUT 1 6. REMOTE OUT 2 Red Black Blue/White White/Brown White/Brown White/Brown

White/Brown White/Brown

Blue/White
POWER CONTROL Connect this line to the ALPINE DVD player's ACC line, which is red. It controls turning the power ON/OFF for the ALPINE DVD player only when AUX1 (source 1) is set to DVD.
REMOTE OUT 1 Corresponds to AUX1. To control ALPINE DVD player, DVB-T/TV tuner or DVD-HU, connect to each REMOTE IN.
REMOTE OUT 2 Corresponds to AUX2. To control ALPINE DVD player, DVB-T/TV tuner or DVD-HU, connect to each REMOTE IN.
REMOTE IN To control ALPINE DVD player, DVB-T/TV tuner or DVD-HU from LCD monitor in the front area of the vehicle, connect this line to the ALPINE LCD monitor REMOTE OUT.

White/Brown

PKG-850P_EN.indd 15

07.12.2006 11:58:00 Uhr

Dome Light Connection

Polarity +

When door open Vehicle Door signal is 12V
Vehicle Door SW Door Closed

Dome Light Wire

Door Open
This wire connects the built-in Dome Light to the cable from the vehicles Dome Light Switch.

(Red) (Black)

(Green)

CONN. TO AV BOX

MICRO SW
S2 Door + SW Lamp J13 CON

Lamp SW S1

Lamp PCB

Vehicle

When door open

Polarity

Door signal is GND
Polarity change switch is located on the top surface that mounts into the headliner. Vehicle Door polarity depends on the vehicle type. The polarity can be changed by the Door SW polarity switch. (Default: Negative Switched System) Polarity +: When door open, door signal is 12V Polarity -: When door open, door signal is GND

PKG-850P_EN.indd 16

07.12.2006 11:58:02 Uhr

System Connections

ALPINE Mobile Multimedia Station ALPINE Mobile Cinema Monitor

AUX IN

REM. OUT REM. IN REM. OUT 2 POWER CONT. REM. OUT1

AUX OUT

AUX 2 IN

ALPINE DVB-T/TV Tuner

REM. IN GND ACC

AUX 1 IN

ACC BATT. GND

REM. IN

ALPINE DVD Player*
1. ACC 2. GND 3. POWER CONTROL 4. REMOTE IN 5. REMOTE OUT 1
* Some buttons, (Play/Pause for example) may not be fully functional with DHA-S680P.
Red Black Blue/White White/Brown White/Brown White/Brown

6. REMOTE OUT 2

PKG-850P_EN.indd 17

07.12.2006 11:58:03 Uhr

PKG-850P
TRIA INTERNATIONAL LTD. 117334, 5- ,. 15,. 11 , . (495) 642-08-08 www.tria.ru - 117334, 5- ,. 15,. 11 , .: (495) 787-88-02 , .
TMX-R850 ( ) SHS-N100 ( 1- ) RUE-4152 ( )

...3....4 ....4

....5 ....6 ....7 / ..8 (MUTE)...8 ....8 ....8 ...9 ...9 ...10 ...10 ...10 ...11 ...11 ...11 ...12 (VISUAL EQ)..13 ..14 ...17 ....17 ....17 ....17 .....17 DVD-...18 ....19 ...19 ....20 ....20

DVB-T /

..20 ...21....22 ....23
...24....26 ...26 ....27 ...28 ...30
. . . . . . . , . . . . . , . 12. , .
, , , . , . . , . . . . . . , / . / . , / . .
. . . . Alpine Alpine . . . . . (+ -). .

, -10 +60. 4

, , . , . . . Alpine Alpine. , TMX-R850 : . . . . . , . . . , 99,99%. , 0,01% () , . , 0,01%, . . , , .
ALPINE TMX-R850 8,5`` LCD TFT ( 480234). 2 A/V- / 1 A/V-. 1 REMOTE IN / 2 REMOTE OUT. ( / DVD- / DVD / DVB-T/ ). Visual EQ (FLAT, NIGHT, MOVIE, SOFT, SHARP, CONTRAST). A/V- ( / / / ). 3 ( / / ). - ( / / OFF). DVD-. . . 5

-

TMX-R850 8,5`` LCD . , - . . , ON/ACC (. .)
, . 90 . , , . . .28 . . , DVD, DVD- DVB-T/-. 6

TMX-R850

DVD ALPINE ( . DV-5210 DVE-5207) DVB-T ALPINE ( DVB-T ALPINE) ALPINE ( ALPINE) , , .

1 , POWER. 2 POWER

. POWER (MUTE).

1 , POWER. 2 POWER.

(MUTE)

1 POWER

(MUTE).

2 MUTE POWER.

MUTE.

.

1 POWER . 2 ,

( ) ( ). . 19.

1 , SEL 2 SEL /SELEC T

. SELECT .

, ( ), . . OFF . , 10 , .

. .

1 DIMMER. 2 DIMMER,
: HIGH (), MID (), LOW () . ( : HIGH).
, , , . . 10 , (OSD) . FLAT CUSTOM. CUSTOM FLAT.

1 SETUP, 2- SELECT.

SETUP (PICTURE).

2 5 5, BRIGHT. 3 .

: -15 (.) +15 (.).

4 ENT 10 ,

. .

2 5 5, COLOR. 3

. : -15 (.) +15 (.).

2 5 5, TINT. 3 .

: G15 (G MAX) R15 (R MAX).

2 5 5, CONTRAST. 3 .

: -15 () +15 ().
2 5 5, SHARPNESS. 3 .

2 5 5, RESET.

3 , ENT.

, ENT 10 , .

4- : Wide, Zoom, Cinema Normal. . 10 , (OSD) .
1 SETUP, 2- SELECT. 2 SELECT, PICTURE DISP MODE.

5 5.

, . WIDE 12
, . . ZOOM , . 16:9. CINEMA

(4:3). NORMAL

3 ENT 10 ,

. .

(VISUAL EQ)
, . . 10 , (OSD) .
1 VISUAL EQ, 2- 2 VISUAL EQ (FLAT, NIGHT, MOVIE,

DIMMER.

SOFT, SHARP, HIGH CONT .) DIMMER 5 5. ( : SHARP).
VISUAL EQ ( ). FLAT: NIGHT MOVIE: SOFT: SHARP: CONTRAST: (VISUAL EQ OFF). . . , . .
(, , , ) FLAT CUSTOM. NIGHT MOVIE, SOFT, SHARP CONTRAST . (CUSTOM). FLAT RESET BRIGHT, COLOR, TINT, CONTRAST SHARPNESS 0.

-, . .

1 SETUP, 2- SELECT. 2 (SYSTEM)

SELECT.

3 5 5.
IR TRANS (-): //OFF. ( : ). SOURCE NAME 1 ( 1): AUX1/DVD/DVD-HU/DVB-T/TV/GAME/ USER. ( : DVD). SOURCE NAME 2 ( 2): AUX2/DVD/DVD-HU/DVB-T/TV/GAME/ USER/OFF*. ( : DVB/-T). * - OFF ( AUX1 OFF ).
AUDIO LEVEL 1 ( AUX1): : HIGH () / MID () / LOW (). ( : HIGH). AUDIO LEVEL 2 ( AUX2): : HIGH () / MID () / LOW (). ( : HIGH). FACTORY DEFAULT ( ): ENT. , . , , .

, 6.

4 USER. 5 ENT. . 6 5, 3, 3, 3 ENT, (AZ), (0-9), (-), (.). DEL: CLR: OK: . . .

OK.

DVD- DVD- (SYSTEM SETUP) , . DVD- / DVD- / DVD- ALPINE.
RUE-4152 DVD- ALPINE. DVD-. DVD- ALPINE RUE-4191.

6. .

7. PRE-STOP. 7 STOP.

4 . 4.

DVD, MENU. DVD 5, 5, 2, 3 ENT. DVD- MENU. 5, 5, 2, 3 ENT. DVD, MENU. DVD 5, 5, 2, 3 ENT. DVD- SETUP. 5, 5, 2, 3 ENT.

DVD-

DVD- ALPINE. DVD- / DVD- / DVD- ALPINE.
DVD- 2- MENU. MENU DVD- DVD-, DVD-. (SETUP).

DVD- SETUP. .

DVB-T/

, . ALPINE.

5 5, , ENT .

1) 2) 3) 4) 5)

- . . . . .
. : , , . 1) . 2) , , . 3) . ( ).

, .

, , . . , Alpine. . . - . . - . . - . . - . . . - . . - . - . - /. - . . / / / . - . / , -, . - . 20

. . - . .

: CR2025 .

, .

(+) , . .

, , .

. , , . .

DIN (8pin/5) AV-

RUE-4152

SHS-N100

CR2025 ( )

8,5`` LCD

*1 . ALPINE.

*2 . ALPINE.

10-16 . (.: 12) 23 8,5`` 16:9 TFT-LCD 480 () 234 () 3 336.960 99,9% NTSC/PAL

- AV-

1,1 (Power On) 140 (Stand-by) 1,0 -, 75 2,0 rms (.) : 2,3 / 2,8 : 3,2 / 3,8 - 10 +60

209,(185 ) 252 1,1

70 [84] [112] 220

, , , 3-5 .

. . 12 (-). ( ). . (-) . , . , . , . , , , , , ., . 24
. . , . . , , , . . , , , . , . . , , , . , . . , , , , . . . , .
. . . . .
, . (, ) . . , . . .
, , TMX-R850 (-) . . . . , , - (, ). TMX-R850 , TMX-R850 . / . Alpine. (, ) RCA, TMX-R850 RCA. . ALPINE.
, . AV-. : ________________________________________________________ : _________________________________________________________ : ______________________________________________ : __________________________________________________________

TMX-R850.

( 12 , ).
. POWER CONTROL () DVD- ALPINE. / DVD ALPINE AUX 1 ( 1) DVD.
REMOTE OUT 1 AUX1. DVD-, DVB-T/ DVD ALPINE / REMOTE IN. REMOTE OUT 2 AUX2. DVD, DVB-T/ DVD ALPINE / REMOTE IN. 1. 2. GND 3. POWER CONTROL 4. REMOTE IN 5. REMOTE OUT1 6. REMOTE OUT2 / / / / REMOTE IN DVD, DVB-T/ DVD ALPINE , , / REMOTE OUT ALPINE.

, .

, . 28
. Door SW polarity. ( : ). (+) : 12. (-) : . + 12

ALPINE ALPINE

DVB-T/ ALPINE

DVD- ALPINE*
1. 2. GND 3. POWER CONTROL

/ / / /

* DHA-S680P (, Play/Pause) .
4. REMOTE IN 5. REMOTE OUT1 6. REMOTE OUT2
TRIA INTERNATIONAL LTD. 117334, 5- ,. 15,. 11 , . (495) 642-08-08 www.tria.ru - 117334, 5- ,. 15,. 11 , .: (495) 787-88-02
: ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan