American Audio CDI-300
American Audio CDI-300, size: 4.7 MB
American Audio CDI-300 Mp3
Seamless loop Fader Q Start 3 flash start buttons with (5 second sample each button) Tempo Lock 8 Auto BPM Counter Hyper Pitch (+/- 4%, +/-8%, +/-16%, +/-100%) Digital output (S/PDIF) Specifications Dimensions (LxWxH): 13.75 x 9.75 x 4.25 / 348x246x106 mm Weight: 7 lbs. / 3 kgs. Links: CDI 300 MP3 User Manual (28.2 MB) Q-D6 Mixer Pro DJ Mixer Features 3-channel Pro DJ mixer 2 phono, 3 Lines, 2 auxiliary and 1 microphone input Mini plug input on face of mixer for use with MP3 players Balanced Out... Read more
Brand: American Audio
Part Numbers: CDI 300 MP3 SYS, CDI 300 MP3 System, CDI-300 MP3 SYS, CDI300MP3System, CDI300SYSTEM
[ Report abuse or wrong photo | Share your American Audio CDI-300 photo ]
My new American Audio CDI 300 DJ system
User reviews and opinions
|traxel||2:56am on Thursday, September 23rd, 2010|
|Happy with purchase I bought it for 2x Numark iCDX and CM200USB. It houses the CD players nicely and the mixer well.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
User Guide and Reference Manual
4295 Charter Street Los Angeles Ca. 90058 www.AmericanAudio.us
SAFETY REGULATIONS....3 ELECTRICAL PRECAUTIONS....4 SAFETY INSTRUCTIONS....5 VOLTAGE SELECTOR....5 UNPACKING.....6 CUSTOMER SUPPORT....6 FEATURES....7 SET-UP INSTALLATION....8 FUNCTIONS AND CONTROLS MAIN UNIT.....9 LCD DISPLAY.....13 BASIC OPERATIONS LOADING EJECTING DISC....14 SELECTING TRACKS....14 STARTING PLAYBACK....15 PAUSING PLAYBACK....15 FRAME SEARCH....15 TRACK SCANNING (FAST FWD/FAST REV)...16 SETTING AND STORING CUE POINTS...16 CREATING A SEAMLESS LOOP....17 USING THE BUILT-IN SAMPLER....19 USING THE BANK BUTTONS....20 CHANGING TIME DISPLAY....20 SYSTEM MEMORY....21 PITCH ADJUSTMENTS PITCH SLIDER.....22 PITCH BENDING....23 FLIP-FLOP.....25 WARRANTY.....26 SPECIFICATIONS.....27 FOR BEST CD-R DISC PLAYBACK RESULTS IN THIS CD PLAYER PLEASE FOLLOW THESE GUIDELINES: 1. High quality CD-R Audio discs (should conform to the standards of the Orange Book 2). 2. Use a high quality bit rate when recording discs. (At least 160kbps) 3. Record discs in the slowest speed possible. (i.e. 2x or 4x speed)
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 2
IMPORTANT INFORMATION IMPORTANT SAFETY ITEMS FOR U.S.A. & CANADA MODEL ONLY
NOTE: This CD player uses a semiconductor laser. It is recommended for use in a room at the following temperature: 41F - 95F / 5C - 35C
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO WATER OR MOISTURE
CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE CAREFULLY INSERTED TO PREVENT BLADE EXPOSURE
USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CAUTION: 1. Handle the power supply cord carefully. Do not damage or deform; it may cause electric shock or malfunction when used. Hold plug attachment when removing from wall outlet. Do not pull on the cord. 2. To avoid electric shock, do not open the top cover when the unit is plugged in. If problems occur with the unit, call your local American Audio dealer. 3. Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may occur.
This unit may cause interference to radio and television reception. Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Take special care to follow all warning symbols and labels both on the unit and printed in this manual. Also, Please keep this manual with the unit, for future reference. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER TYPE OF ELECTRICAL OUTLET UNLESS THE WIDE BLADES CAN BE CAREFULLY INSERTED INTO A MATCHING WIDE SLOT. ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
CAUTION Do not open Risk of electric shock
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER RACK. THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICE TO YOUR AUTHORIZED American Audio DEALER.
The lightning flash with an arrow triangular symbol is intended to alert the user to the presence of non insulated dangerous voltage within the products enclosure, and may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point triangular symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the user manual accompanying the CD player.
VENTILATION Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION The appliance should be installed in a stable location. NONUSE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC NATIONAL ELECTRICAL CODE
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 4
I. Read Instructions - All the safety and operating instructions should be read before the CD Player is operated. The safety and operating instructions should be saved for future reference. 2. Heed Warnings - All warnings on the CD Player and in the operating instructions should be adhered to. 3. Water and Moisture - The player should not be used near water - for example, near a bath tub, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc. 4. Ventilation - The CD Player should be situated so that its location or position does not interfere with its proper ventilation. For example, the CD player should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 5. Heat - The CD player should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 6. Power Sources - The CD player should be connected to a power supply only of the type described in the operating instructions or as marked on the CD Player. 7. Servicing - The user should not attempt to service the CD Player beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. The Player should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the CD Player. C. The CD Player has been exposed to rain or water. D. The CD Player does not appear to operate normally or exhibits a marked change in performance.
Line Voltage Selection
The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel (using a flat head screw driver). Do not force the VOLTAGE SELECTOR switch as this may cause damage If the VOLTAGE SELECTOR switch does not move smoothly, please contact a qualified service technician.
VOLTAGE SELECTOR switch
The serial and model number for this unit is located on the rear panel. Please write down the numbers here and retain for future reference. Model No._____________________________ Serial No._____________________________ Purchase Notes: Date of Purchase_______________________ Dealer Name__________________________ Dealer Address_________________________ __________________________________________ ________________________________________ Dealer Phone__________________________
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 5
Every CDI-300 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your CD player for any damage and be sure all equipment necessary to operate the CD player has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the CD player to your dealer without rst contacting customer support.
Introduction: Congratulations and thank you for purchasing the American Audio CDI-300 CD player. This CD player is a representation of American Audios continuing commitment to produce the best and highest quality audio products possible at an affordable price. Please read and understand this manual completely before attempting to operate your new CD player. This booklet contains important information concerning the proper and safe operation of your new CD player. Customer Support: American Audio provides a toll free customer support line, to provide set up help and answer any question should you encounter problems during your initial set up or operation. You may also visit us on the web at www.AmericanAudio.us for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Pacic Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: email@example.com To purchase parts online visit http://parts.americandj.com Caution! There are no user serviceable parts inside this CD player. Do not attempt any repairs yourself, without being instructed to do so by an authorized American Audio service technician. Doing so will void your manufactures warranty. In the unlikely event your CD player may require service, please contact American Audio customer support. Do not discard the packing carton in the trash. Please recycle when ever possible.
Please be sure to make any connections before plugging the CD player in to an electrical outlet. All fader and volume controls should be set to zero or minimum position, before the CD player is switched on. If the CD player has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch on the CD player immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature. Operating Determinations: When installing this CD player, please make sure that the device is not exposed or will not be exposed to extreme heat, moisture or dust! Do not operate the CD player in extremely hot (more than 30/100F) or extremely cold (less than 5C/40F) surroundings. Keep the unit out of direct sunlight and away from heaters. Operate the CD player only after becoming familiar with its' functions. Do not permit operation by persons not qualied for operating the unit. Most damages are the result of unprofessional operation.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 6
8 times over sampling 1 bit D/A converter Music Master tempo Auto cue Scratch Effect 1/75th second frame search Digital Anti-Shock Real time cue (Cue on the Fly) Selectable Single or Continuous Play 8 different speed scan (4 Forward/4 Reverse) Flash Function (e) Fader Q Start Control (a) Sleep Mode (f) Digital RCA coaxial output Jog Wheel Pitch Bend +/-100% Large bright Digital Screen can be viewed from wide angles. Flip-Flop (Relay Playback) (b) 381 programmable Cue Points (127 x 3) (d) Pitch display Seamless Loop (uninterrupted loop playback) Sampler (Forward & Reverse Sampling) Memory Backup, Defaults to last setting (c) Visual Marker Display with 1:1 Ratio 4 Programmable Cue and Sample (Bank) Buttons, 7 sec. Samples for each Bank Button Adjustable Pitch Percentages: +/-4%, +/-8%, +/-16% or +/-100% Instant Start within 10 ms (sound is produced immediately when the PLAY button is pressed)
(a) FADER Q START CONTROL: This feature is used in conjunction with most American Audio and American DJ audio mixers that also feature Fader Q Start control. For best results use this feature with two (2) CDI-300 players. Connect your CDI-300s as described in the set-up section of this manual. After set up is completed load your players. By moving the mixers crossfader from left to right you can start and pause your CDI-300 playback functions. For Example, when using two (2) CDI-300 players and a Fader Q Start mixer, if your mixers cross fader is all the way to the left (player one is playing, player two is in cue or pause mode), and you move the fader at least 20% to the right, player two (2) will begin to play and player one (1) will return to cue mode. When the cross fader is to the right, and you move it 20% to the left, player one (1) will begin to play and player two (2) will return to its cue point. You can create great effects similar to scratching with this feature. After storing cue points on each side of the CD player, different songs or samples may quickly be recalled by moving the mixer crossfader back and forth. New cue points can be easily selected on the CDI-300 player (see setting cue points page 16). Q Start control is easy to use and mastering this feature will help you create amazing effects with your music. Note: For proper Q Start operation be sure your mixers Hamster setting are set to 1/2 (Normal Setting). (b) FLIP-FLOP: This feature is used in conjunction with American Audio mixers that also feature Fader Q Start. For FLIP-FLOP results you must use two (2) CDI-300 players. Connect your CDI-300s as described in the set-up section of this manual. This feature will start the next player once one (1) player has ended. For example, if player one (1) is playing a disc and it ends, player two (2) will instantly begin to play. You may set FLIP-FLOP to play track to track or disc to disc. For more information on this feature, see FLIP-FLOP on page 25. (c) MEMORY BACKUP: The CDI-300 has a five (5) year memory back-up, that will save your setting in case the power supply is accidentally disconnected. CDI-300 will remember your last setting even if you disconnect your main power. The CDI-300 will store your cue points and samples in memory if you accidentally eject a disc or shut off the power. See memory on page 21. (d) PROGRAMMABLE CUE POINTS: The CDI-300 has four BANK BUTTONS (4). 127 Cue points can be stored in each of the BANK BUTTONS (4), for a total of 381. These cue points can be stored into the unit's internal memory and may be recalled at any time. See setting "Cue Points" on page 16 (e) FLASH START FUNCTION: This feature is used in conjunction with most American Audio and American DJ audio mixers that also feature Fader Q Start control. This function work similar to the Fader "Q" Start Control described above. In this case the crossfader is used to start and stop any sample that is stored in the players memory.
(f) SLEEP MODE: The CDI-300's laser and pick-up assembly will power down after 15 minutes of inactivity (when in
pause or cue mode). This will lengthen the life of your motor drive and laser. To initialize the player, just press the cue or play buttons.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 7
1. Checking the Contents Be sure your CDI-300 was shipped with the following: 1) CDI-300 Professional CD player. 2) Operating instructions (this booklet). 3) One (1) set of RCA cables. 4) One (1) 1/8 mini plug. 5) Warranty card. 2. Installing the Units Place your unit on a flat surface or mount it in a flat surface case 3. Connections 1) Be sure the power is disconnected. 2) Connect the included RCA cable from your CDI-300 outputs to the inputs on your mixer. 3) Use the supplied 1/8 mini plug cable to connect your CDI-300 to a mini jack connection (A or B ) on a compatible American Audio or American DJ Fader Q Start mixer. CAUTION: Be sure to use the supplied mono 1/8" control cables. Using other types of cable may result in unit damage To avoid severe damage to the unit, be sure the power is off when making connections to the unit. CAUTION: The player will work normally when the main unit is mounted with the front panel within 15 degrees of the vertical plane If the unit is tilted excessively, discs may not be loaded or unloaded properly. (Figure 1)
CAUTION: The LCD is designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 8
GENERAL FUNCTIONS AND CONTROLS
P R O F E S S IO N A L C D P L AY E R
A. TOP UNIT CONTROLS (FIGURE 3)
1. PITCH PERCENTAGE SELECTOR - Press this button to select pitch range percentages of 4%, 8%, 16%, and 100%. See adjusting the PITCH SLIDER'S RANGE on page 28. 2. TEMPO LOCK FUNCTION - This button activates the TEMPO LOCK function. This function allows you to use the PITCH SLIDER to speed up or slow down playback speed without altering the tonal pitch of the track. When this function is not engaged the original tonal pitch of the track will be altered giving you the "chipmunk" effect when a track is played at a high rate of speed, or the "James Earl Jones" effect when a track is slowed to much. 3. BPM/PITCH ON/OFF BUTTON - This button is used to toggle between the PITCH SLIDER (5)
is indicated in the LCD DISPLAY (22) the TIME DESCRIBED (35, 36, & 37) in the LCD will define the current track's remaining time. 39. TOTAL/REMAIN INDICATOR - When "TOTAL" and "REMAIN" are indicated in the LCD DISPLAY (22) the TIME DESCRIBED (35, 36, & 37) in the LCD (22) will define the total disc remaining time. 40. RELOOP INDICATOR - Appears when LOOP is engaged or ready to be engaged. 41. LOOP - This icon will flash when you are in loop mode. This icon will glow when a loop has been created but is not actively playing. 42. SINGLE INDICATOR - This indicates that the CD drive is in single play mode, the track will play once and return to CUE mode. If the single indicator is not on the unit is in continuous mode In continuous mode the drive will play all the remaining tracks on the disc. Once the remaining tracks have ended the unit will return to cue mode 43. CD DIRECTION INDICATOR - Indicates the direction the CD is rotating. Counter-Clockwise rotation means the CD is playing in reverse. 44. TRACK INDICATOR - This 2-digit indicator visually details the current track cued or playing. 45. PLAY INDICATOR - The "PLAY" indicator will glow when the unit is in play mode.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 13
1. LOADING/EJECTING DISCS
The CDI-500 can only play 3 inch and regular 5 inch CDs. When loading a CD into the player always hold the disc by it edge). Load the disc label side up and never touch the signal surface (the glossy side). To remove a disc from the player press the EJECT BUTTON (12), see Figure 7. CAUTION: NEVER attempt to load any other objects besides 3" and 5" CDs. NEVER attempt to load more than one disc at a time. Doing so may result in sever damage to your unit. DO NOT force the transport tray open or close when the power is off, this may damage the drive system.
P R O F E S S IO N A L
P L AY E R
Figure 7: Press the Eject button to load and remove a disc. Remeber: When loading a disc always hold the disc by it edges and load the disc label side up.
2. SELECTING TRACKS
Select a desired track by using either of the two TRACK BUTTONS (20). Tapping the TRACK BUTTONS (20) once will select either the next higher or lower track. You may hold down the TRACK BUTTONS (20) to change tracks continuously at a faster speed. If you are using the TRACK BUTTONS (20) to select a new track during playback (a track is already in play mode) the new track you selected will immediately begin playback as soon as the search operation is completed.
Figure 8: Tapping the reverse track button will jump back to the previous track.
Figure 9: Tapping the forward track button will skip forward to the next track.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 14
BASIC OPERATIONS (CONT.)
3. STARTING PLAYBACK - Figure 10
Insert an audio CD as describe on page 14 (LOADING/EJECTING DISCS). Pressing the PLAY/PAUSE BUTTON (14) with an audio CD inserted will immediately start playback. The PLAY (46) indicator will glow as soon as playback begins. The point at which playback starts (cue point) will automatically be stored in the memory as the cue point. The unit will return to this cue point (the point at which playback started) when the CUE BUTTON (16) is pressed.
4. AUTO CUE
This function will automatically set a cue point to the first audio source when a CD is inserted. The first set cue point will always be the beginning of track 1. If a new track is selected before the PLAY BUTTON (14) is pressed, a new CUE POINT will be set to reflect the new starting point.
5. STOPPING PLAYBACK - Figures 10 & 11
Stopping playback will not stop the drive mechanism, but merely pause or cue the track, this functions allows the unit to begin play instantly. The drive mechanism will only stop if a disc is ejected or the unit has gone in to sleep mode. There are two ways to stop (pause) playback: 1) Press the PLAY/PAUSE BUTTON (14) during playback. This will pause playback at the exact same point the PLAY/PAUSE BUTTON (14) was pressed. 2) Press the CUE BUTTON (16) during playback. This will pause playback and return the track to the last set cue point.
6. PAUSING - Figure 10
This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (14) was pressed. Pressing the PLAY/PAUSE BUTTON (14) will switch between play and pause modes. When the unit is in pause mode the PAUSE INDICATOR (30) will show in the LCD DISPLAY (22). The green PLAY/PAUSE BUTTON (14) LED will also begin to flash repeatedly.
7. FRAME SEARCH
This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue, sample, or loop point. To use the scroll function you must first be in Pause Mode (see section 6) or Cue Mode (see section 9). Once you are in Pause or Cue mode, turn the JOG WHEEL (10) to scroll through the track (Figure 13). Turning the wheel in a clockwise direction will advance the frame search and turning the wheel in a counter-clockwise direction rewinds the frame search. When you use the JOG WHEEL (10) the monitor (headphone level) function allows you to here what you are scrolling through. Once you reach your desired starting point you can set a cue (starting) point by pressing the PLAY/ PAUSE BUTTON (14) as in Figure 10. Pressing the CUE BUTTON (16) as in Figure 11 will now return you to the point you just set.
2) Repeat the above steps to store up to two more Cue Points. Once your three cue points have been stored you may access them at any time. During playback the cue points will instantly start playback from that point without any music interruption. Please note in order to access these cue point, the disc used to create the cue points must be loaded.
10. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length of disc. You create a seamless loop between two continuous points of a disc.
1) Press PLAY/PAUSE BUTTON (14) to activate playback mode
2) Press the IN BUTTON (19). This will set the starting point of the SEAMLESS LOOP. The IN BUTTON (19) LED will light.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 17
3) Press the OUT BUTTON (18) to set the ending point for your SEAMLESS LOOP (Figure 20). The IN BUTTON (19) and OUT BUTTON (18) LEDs will immediately begin to flash rapidly, indicating the SEAMLESS LOOP mode has been activated.
LCD LOOP INDICATORS - During a seamless loop, the LOOP (41) and
RELOOP (40) INDICATORS will turn on in the LCD DISPLAY (22) indicating a loop is active.
EXITING A LOOP - To exit a SEAMLESS LOOP, press the OUT BUTTON (18). The IN BUTTON (19) and OUT BUTTON (18) LEDs will remain on, but will stop flashing. Music playback will resume normal play. The IN BUTTON (19) and OUT BUTTON (18) LEDs will remain on to remind you that a loop is stored in memory.
REPLAY LOOP - The RELOOP (17) function allows you to return to your
stored loop at any time. The IN BUTTON (19) and OUT BUTTON (18) LEDs will indicate a loop is stored in memory, and may be played at any time. To replay the loop, press the RELOOP BUTTON (17). The IN BUTTON (19) and OUT BUTTON (18) LEDs will again begin to flash indicating SEAMLESS LOOP mode has been activated and your stored loop will immediately begin to play.
11. EDITING A LOOP:
Please note: Only the ending point of the loop may be edited. You may make your loop shorter or longer. Before you can edit your seamless loop you obviously must first create a seamless loop to edit. If you havent created a SEAMLESS LOOP, follow the instructions in step 10 to create a loop. If a SEAMLESS LOOP has already been created, press the RELOOP BUTTON (17) to activate your SEAMLESS LOOP (Figure 22) if it is not already activated. To edit your seamless loops ending point: 1) Press the OUT BUTTON (18) to return to normal play from the loops cue point. (Figure 21). This will disengage the SEAMLESS LOOP mode and allow you to edit the loops ending point. 2) Press the OUT BUTTON (18) again when you reach your new ending point (Figure 21). - FOR A SHORTER LOOP: Press the OUT BUTTON (18) at sooner point in the track (Figure 21). - FOR LONGER LOOP: Press the OUT BUTTON (18) at later point in the track (Figure 21).
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 18
12. Using the Built In Sampler:
Your CDI-300 comes with an advanced built in sampler. You may store up to four samples. One sample in each of the four BANK BUTTONS (4) (Once again please note you may only store either a CUE POINT or a SAMPLE into a BANK BUTTON (4), not both). Your sample can be a maximum of 6.5 seconds in length. A sample can be recalled while a CD is playing, while the CD drive is in PAUSE MODE, you may even play a sample when the CD has been removed. You may play your sample at anytime without music interruption. If you play your sample when the unit is already in playback mode you sample will over lap the current music source. You can also play your sample once or in a continuous loop. As with cue points you may store approximately 381 (127 x 3) samples in a drives memory (depending on available memory). The MEMORY BUCKET (31) on the LCD DISPLAY (22) will approximate the remaining memory.
To create a sample:
1) Initialize a loop (see creating a seamless loop on page 17). If your loop is longer than 6.5 seconds it cannot be stored as a sample and will stored as a Cue Point.
2) Press the MEMORY BUTTON (13). The MEMORY BUTTON (13) red LED will glow indicating memory is ready to be stored.
3) Select one of the four BANK BUTTONS (4) you wish to store your loop in and press that button.
4) The red MEMORY BUTTON (13) LED will turn off, when your sample is locked into memory. 5) At this point your sample has been stored into memory. The original loop you used to create the sample will remain playing until the OUT BUTTON (18) is pressed (Figure 25). 6) Your sample can now be recalled at any time even when the unit is in PAUSE MODE. To recall the sample be sure the sample function is on, by pressing the SAMPLE BUTTON (15) until the red sample button LED turns on. To play your sample in a continuous loop leave the sample function on. To play your sample just once, turn the sample function off immediately after initiating your sample. With the sample function on, the sample will continue to play until the sample function is turned off. Figure 25 7) Important Notice: If you try to activate your sample without turning the sample function on, the BANK BUTTON (4) will act as cue Figure 26 point!
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 19
13. BANK BUTTONS (4):
These buttons are used to store your samples and cue points. Only a sample or a cue point can be stored into each of these three banks. When a sample is stored in to these banks you may use the sample starting point as a cue point. The BANK BUTTONS instantly recall and play any of your stored samples or cue points without interrupting music playback. When in sample mode, (see "Using the Built-In Sampler" on page 19) and during playback, pressing any of the BANK BUTTONS that stores a sample, will immediately begin to play that sample without interruption of music. If the unit is in sample mode and the drive is not in playback mode, pressing any of the BANK BUTTONS that stores a sample, will immediately begin to play that sample.
14. CHANGING THE TIME DISPLAY (35, 36, & 37)/TIME BAR (34):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (6), will change the time display information (35, 36, 37, & 34) in the LCD (22). The following is a break down of the time settings and their definitions: 1) ELAPSED - This describes the time in the LCD (35, 36, & 37) as the current TRACKS Elapse running time. 2) REMAIN (38) - This describes the time in the LCD (35, 36, & 37) as the current TRACKS remaining running time. 3) TOTAL REMAIN (39) - This describes the time in the LCD (35, 36, & 37) as the disc total remaining running time.
TIME BAR INDICATOR - Details the time defined in the TIME METER (35, 36, & 37) as a visual bar icon. As with the TIME METER (35, 36, & 37) this bar is also dependent on the selected time function [TOTAL REMAIN (39), REMAIN (38) OR ELAPSED]. This bar will begin to flash when a track is ending regardless of which time funct on you are in. Use the flashing bar as a visual reminder that a track is ending.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 20
15. SYSTEM MEMORY:
The CDI-300 comes with an incredible memory system. The unit can memorize all cue points, and samples used on a particular disc. To store all your setting for a CD, press and hold down the MEMORY BUTTON (13) for at least three seconds. When the memory has been stored properly the MEMORY LED (13) will turn off. The memory is full the outline of the MEMORY BUCKET (31) in the LCD (22) will disappear.
To Flip-Flop entire CDs: Be sure your players are both in continuous play mode, make sure SINGLE MODE (42) does not appear in the LCDS (22) of both players. Follow all directions for single track FLIP-FLOP above. When one players disc ends the other player will immediately begin playback.
Note: You may combine FLIP-FLOP single and continuously playback modes by selecting either single or
continuous playback on your units. Connecting your CDI-300 to an American Audio or an American DJ Q Deck mixer for Flip-Flop control: Be sure to connect 1/8 mono mini plugs from the control connection on the rear of your CDI-300 to the 1/8 control jack on the rear of American Audio Q series mixer. Thats it, youll be set for FLIPFLOP.
Sample "Q" Start Set-Up. This set-up will allow "Q" start function and Flip-Flop function to operate. Be sure to use 1/8" mono mini plugs only.
Compatible Q-Deck Mixer
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 25
This warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase and warranty. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American Audio customer support at (800) 322-6337 for a R.A. number. All package not displaying a R.A. number on the outside of the package will be returned to the shipper.
WARRANTY INFORMATION: The CDI-300 carries a ONE year (365 days) limited warranty.
1-YEAR LIMITED WARRANTY
A. American Audio hereby warrants, to the original purchaser, American Audio products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owners responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the American Audio factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American Audio will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American Audio shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modied in any manner which American Audio concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American Audio factory unless prior written authorization was issued to purchaser by American Audio; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specied above, American Audio will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American Audio under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American Audio. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. American Audio reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American Audio in connection with this product, including warranties of merchantability or tness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or tness, shall apply to this product after said period has expired. The consumers and or Dealers sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American Audio be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to American Audio Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
change without any prior written notice.
Audio - www.AmericanAudio.us - CDI-300 Instruction Manual Page 27
American Audio World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-3322 Fax: 323-582-3311 Web: www.AmericanAudio.us E-mail: firstname.lastname@example.org
Seamless loop Fader Q Start 3 flash start buttons with (5 second sample each button) Tempo Lock 8 Auto BPM Counter Hyper Pitch (+/- 4%, +/-8%, +/-16%, +/-100%) Digital output (S/PDIF) Specifications Dimensions (LxWxH): 13.75 x 9.75 x 4.25 / 348x246x106 mm Weight: 7 lbs. / 3 kgs. Links: CDI 300 MP3 User Manual (28.2 MB) Q-D6 Mixer Pro DJ Mixer Features 3-channel Pro DJ mixer 2 phono, 3 Lines, 2 auxiliary and 1 microphone input Mini plug input on face of mixer for use with MP3 players Balanced Outputs Fader "Q" Start compatible Gain, treble, mid & bass control for each channel (-26 dB Rotary Kills) DJ microphone with volume, treble, bass and talkover control Stream flow"! LED master level indicators Cue mixing, cue level and master level control High output to headphones Extremely clean signal to noise ration Specifications Dimensions (LxWxH): 10" x 12.25" x 3.25" / 254 x 308 x 82.5mm Weight: 6.5 lbs. / 3 kg.
D7300 TXP37C10Y Adapter VSX-D511 MRO-DF6 CH-X500 XV250TC UE-40C6800US 4532 1993 Minolta 7040 DVP-FX94 FZ6-NHG-2007 IRT3020 HA-845 SCX-6220 Bizhub 163 DM1002mkii NW-E025F GA-890GPA-ud3H SAL1855 Focus GS748T G-302 V3 GR-S462GC MD-MT20H 88759 GP-1850WF LC 48 VE 460 WF-T9235TP Diablo DP226 L196WTQ-WF Digiwalker C710 Chiller 1150 GS Workcentre 7232 Winter GA-8S648FXM CQ-C1011NW GZ-MG27E Pilot Review 191K2 Aspire E360 KDC-4047U RCD-940BX FAX-phone 1600 Drive Nokia 6275 55C7000 29PT8303 BM 3982 AV260CP AML 129 YZF-R1-1999 MV802 MFX2030 3 PRO Pictureshow 4 CA-53 TM271 Navigator 2003 Xecutive 1 12 0 10 4 AJ260 37B GX-400 CMT-J1MD X466DTE RR-US450 NAV360-S MS-2357AR Samsung Z248 4 1 DCP-8020 Slayer NV-GS17E RX-CW43 GT-S3370 NE-671 AQV09nsan LSL120H-1 EW1031 Blackberry 5820 MC-7647B Cowon D2 AJ-D400 P4SGX-mx QSG CD4452B Card PCI ICD-UX71F 710 712C Pentax Z-20 Instructions EX-Z60DX 220-240V AQV09vbcx Latitude LM FW339C Bka123
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101