Here you can find all about Amoi LC32AF1E like manual and other informations. For example: review.
Amoi LC32AF1E manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Amoi LC32AF1E please write about it to help other people. [ Report abuse or wrong photo | Share your Amoi LC32AF1E photo ]
Amoi LC32AF1E, size: 5.8 MB
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Quick Start Guide
LC32AF1E /LC32A1E LC37AF1E /LC37A1E LC40AFIE /LC40A1E
Many thanks for purchasing Amoi LCD TV. Please refer to the QUICK START GUIDE below for connection information.
Unpacking and Accessories Checking
(2) Power Cord ( 4 ) User's manual and Quick Start
ce ta n te ep c c if ic a )A ( 6 C e rt
(1) Remoter Control (RC)
(3) AV Cable
( 5 ) Acceptance Certificate
( 6 ) Hand Protector
Do remember to put the hand protector onto the TV as shown in the right picture to prevent being hurt while moving it by hand. Children'd better not play around the TV since the sharp edge may hurt them.
Inserting Batteries into Remote Control
A. Pull the battery cover downward in the direction shown by the arrow and remove it. B. Insert t wo AAA batteries with correct polarity.
Remote control direction
C. Replace the battery compartment cover.
Point the remote control at the remote sensor.
Connecting TV Unit with Antenna/Cable TV
Take off the rear interface cover
Drive the manual screws using your hand in the direction as the arrow shown in the picture to take it out. After taking two screws out, put your hand at the area of the rear interface cover shown in the picture, pull it downwards and take it off.
Rear interface cover
Connecting Antenna/Cable TV
TV Rear Panel
~110 - 240 V 50/60HZ
R AUDIO L
COMPONENT IN (HDTV/DVD)
PC AUDIO IN
Y Pb/Cb Pr/Cr
DIGITAL AUDIO OUT
EXT3 SERVICE ONLY
L R OPTICAL COAXIAL
S-VIDEO/RGB / VIDEO
S - VIDEO
TV Side Interface
S-Video 3 input
RF Cable Cable TV
Plug the antenna/cable TV lead into the ANTENNA terminal on the bottom of the back panel.
Make sure your cable (not supplied) is available and kindly connect the antenna cable as shown in the picture. For more detailed antenna/cable TV connections, see pages 6 of the user's manual.
Connecting a VCR
VCR Rear Panel
Cable or Antenna
Video Cable RF Cable
Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. Connect an RF cable between the ANTENNA OUT terminal on the VCR and the ANTENNA IN (CABLE) terminal on the TV. Connect an audio cable between the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L] jack on the TV. Connect a video cable between the VIDEO OUT jack on the VCR and the AV IN Jacks [VIDEO] on the TV. If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the R-AUDIO-L jacks on the TV.
Connecting a DVD/Set-top box via DVI (480p, 720p, 1080i)
DVD Player or Set-top box ~100 - 240 V Rear Panel
2 Audio Cable 1
DVI to HDMI Cable
Connect a DVI to HDMI cable or DVI=HDMI Adapter (DVI to HDMI) between the HDMI/DVI connector on the TV and DVI connector on the DVD player/Set-top box. Connect an audio cable between the PC AUDIO IN jack on the TV and the AUDIO OUT jacks on the DVD player/Set-top box.
Connecting a Set-top box via HDMI
Connect a HDMI cable between the HDMI/DVI connector on the TV and the HDMI connector on the DVD player/Set-top box. If connecting with an HDMI cable, it is not necessary to connect an audio cable. If connecting to an equipment witch only has a DVI output terminal, DVI to HDMI adapter cable and an other audio cable is necessar ily needed. HDMI / DVI deos not support a PC which has a DVI connector.
When connecting with HDMI, you can get better audio effect by connecting digital audio signal device to other playing devices like amplifier through Coaxial or Optical connector.
Digital Audio System
Optical Cable Coaxial Cable
Connecting a DVD/Set-top box via SCART
TV Rear Panel DVD Player or Set-top box ~100 - 240 V Rear Panel
Connect a SCART cable between the SCART connector on the DVD payer or Set-top box and the SCART connector on the TV back panel. Since there are three SCART connectors on the TV back, please make sure the input signal type and connect them to corresponding SCART jack. For detailed SCART connection operation, please refer to P9 of the user's manual.
CVBS EXT1 EXT2 EXT3
RGB CVBS TV
The signal input to EXT1 will be detected automatically. Select the desired signal type on "Source Setting" in the "Setting" menu according to the input signal source-only for EXT1/EXT2. The setting will be stored and can be viewed on "SOURCE" MENU. For detailed information, please refer to the user's manual.
Amoi LCD TV has professional "Scart Auto Playback" function, which will automatically switch main sources after changing the input signal. For detailed operation please refer to P15 of user's manual.
Connecting Component Signal Devices
Component Signal Source
Audio Cable Component Cable
Connect an audio cable between the COMPONENT IN [L, R (AUDIO)] jacks on the TV and the AUDIO OUT jacks on the DVD player. Connect a component video cable between the COMPONENT IN [Y, Pb, Pr] jacks on the TV and the COMPONENT [Y, Pb, Pr] jacks on the DVD player. Each external input source device (DVD, STB, VCR etc.) has a different back panel configuration.
Connecting S-Video or other composite signal sources.
S-Video or composite signal output
Audio Cable Video Cable S-Video Cable
Connect an Audio cable between Audio out jack of the S-VIDEO or Composite signal device and the AUDIO jack [L-AUDIO-R] on the side interface of TV. Connect a video cable between the Video out jack of the S-VIDEO or Composite signal device and the VIDEO jack on the side interface of TV. OR: Connect S-VIDEO /Composite video cable between S-Video jacks of the corresponding Device to the S-VIDEO jack on the side interface of TV. Normally you don't have to connect Video Cable if S-VIDEO is connected. If you connect both at the same time, S-VIDEO will work instead of Video Cable.
Connecting a PC
PC Audio Cable
PC Video Cable
Connect the D-Sub cable to PC (PC IN) on the TV. Connect the stereo audio cable to PC AUDIO IN on the TV and the other end to Audio Out of the sound card on the computer.
First connect your TV to power source using power plug. Install the rear interface cover back onto the TV back. Then press " Power switch " on. After that the indicator will be red. Finally two ways to turn on your TV: Press "POWER" button on RC; Press "POWER" button on the upper panel of TV unit.
Remote Control Description
Sub source Main source
To freeze current image
Power button Last source MUTE Display status To set sleep time P OP mode PIP / PBP mode
Aspect No - picture Swap Picture mode Sound mode Numerical buttons
Dual sound selection Previous channel
Channel list Volume up/down Enter OSD setup mode
Speed/Slow Page up/down
Enter (Teletext Index)
Teletext P age Down
( Teletext Subpage Up )
( Teletext Subpage Down)
( Teletext Display/Mix)
(Teletext Size) (Teletext Hold)
( Teletext Reveal)
Note : Teletext function keys description is in orange)
Initial Auto Installation
When the TV powers on for the first time after purchase, the initial auto installation is involved. You can automatically set language, country, time, sound system and channels in successive operations.
The initial auto installation functions only once.
This menu will display on the TV screen automatically after the TV being turning on for the first time. Press "OK" button to choose "Next" to start.
Set OSD Language
English French Spanish German Swedish Finish Norwegian Dutch
Setting the on-screen display language Press " "to select the desired language listed on the screen. Press "OK" to enter the setting.
Setting the country or area Press " " to select your country listed on the screen. Press OK to enter the setting.
Set Current Date and Time
YY 2005 HH 00 MM 01 MIN 00 DD 01
Setting the current date and time Press " " to select the item you want set. Press " " to change the setting. Press " " to enter "Next" and then press "OK" to enter the setting, or press " " to choose "Cancel" or "Back".
Set Sound System
L L' Back Next
BG I DK
Set sound system Press " " buttons to choose the optimum sound system among locally receivable broadcasting systems "DK/BG/I/L/L". T hen press "OK" to confirm. Press " " to enter "Next" and then press "OK" to enter the setting, or press " " to choose "Cancel" or "Back".
Channel Preset Press "OK" to start the auto search, or press " " to choose "Cancel" or "Back". After this setting , auto search starts with the following order 1. Program auto search 2. Auto labelling 3. Auto sorting You do not need to do anything during the auto search. During the initial auto installation process, the channel found will be labeled and sorted automatically. Automatic channel labeling The TV can only name channels where the channel labeling information is provided. If no channel labeling information is provided, the TV only displays the channel number, leaving the channel name blank. Automatic channel sorting Dual the process of auto labeling, the TV sorts the labeled channels automatically.
Do you want to search channel automatically?
Current Channel: TV Band:
Auto Search Press "EXIT" to stop the auto search, but you are recommended not to stop it during the search process since the initial auto installation functions only once.
After the auto search finished, the finishing sign menu will display on the screen. Then the TV will stop at channel one. Watching TV The setup menu disappears and you can watch the program on channel 1.
Most set channels carry teletext , pages of written information that provide information such as: Television program times News bulletins and Weather forecasts Sports results Subtitles for the hard of hearing The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting station identity. Current page number or searching status. Date and time. Text. Status information.
To activate the teletext mode and display the contents page:
1 Using the (CH+/CH-) buttons to select the channel providing the teletext service. 2 Press the TXT/MIX ( ) button to activate the teletext mode.
Result: The contents page is displayed. It can be redisplayed at any time by pressing the INDEX ( ) button.
3 To display the actual broadcast simultaneously with the teletext Page, press the TXT/MIX button again. 4 To return to normal viewing, press the TXT/MIX button for the third time.
The buttons for Teletext function are invalid when menu displaying. You can activate the teletext function buttons by pressing the "EXIT" or TXT/MIX " button. Image freezing function is invalid under TXT/MIX mode. The image freezing mode will exit automatically when entering Text mode.
Selecting a Specific Teletext Page Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed.
2 If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the HOLD ( Press HOLD ( ) button again to resume. ) button.
Using the various display options: To display. Both teletext information and the normal broadcast Hidden text (answers to quiz games, for example) The normal screen A secondary page, Press Subpage Up/Subpage Down The next page, The previous page, The next page, The previous page, Double-size letters in the: Upper half of the screen Lower half of the screen Normal screen REVEAL again Subpage Subpage up Subpage down PAGE UP PAGE DOWN SIZE Once Twice Three times REVEAL Press the. TXT/MIX
For detailed teletext operation please refer to p38 - 39 o f user ' s manual.
Series Model Safety and regulation Display
G 2.0 LC26AF1E CE 26" 16:9 16.7 M 500 cd/m 800:H / 170 V ms 0.4215mm(H)0. 4215mm(V) 50000 hours 1080P/1080i/720P/576P/480P Standard, Bright, Soft, User Standard, Full Screen, 4:3. Wide, Subtitle No No 3D Yes Yes Yes 1 PAL/SECAM BG/DK/I/L/L' VHF,UHF,CATV 2 X 3", 2 X 1 " 10W X 2 Dual Sound/Nicam BBE Yes Yes Yes Yes USB + CF/SD card reader, Optional MP3/WMA/JPEG/MPEG1/MPEG4(Divx) stream media compatible 1000 pages No No Antenna(RF) Composite S-Video Component DVI HDMI-HDCP interface 1 rear 1 side 1 side 1 rear No 1 rear
G 2.0 LC32AF1E CE 32" 16:9 16.7 M 500 cd/m 800:H / 170 V ms 0.51075mm(H)0.51075mm(V) 60000 hours 1080P/1080i/720P/576P/480P Standard, Bright, Soft, User Standard, Full Screen, 4:3. Wide, Subtitle Yes Yes 3D Yes Yes Yes 2 PAL/SECAM BG/DK/I/L/L' VHF,UHF,CATV 2 X 3", 2 X 1 " 15W X 2 Dual Sound/Nicam BBE Yes Yes Yes Yes USB + CF/SD card reader, Optional MP3/WMA/JPEG/MPEG1/MPEG4(Divx) stream media compatible 1000 pages No No 1 rear 1 side 1 side 1 rear No 1 rear
G 2.0 LC37AF1E CE 37" 16:9 16.7 M 550 cd/m 800:H / 170 V ms 0.4215mm(H)0. 4215mm(V) 60000 hours 1080P/1080i/720P/576P/480P Standard, Bright, Soft, User Standard, Full Screen, 4:3. Wide, Subtitle Yes Yes 3D Yes Yes Yes 2 PAL/SECAM BG/DK/I/L/L' VHF,UHF,CATV 2 X 3", 2 X 1 " 15W X 2 Dual Sound/Nicam BBE Yes Yes Yes Yes USB + CF/SD card reader, Optional MP3/WMA/JPEG/MPEG1/MPEG4(Divx) stream media compatible 1000 pages No No 1 rear 1 side 1 side 1 rear No 1 rear
G 2.0 LC40AF1E CE 40" 16:9 16.7 M 500 cd/m 800:H / 170 V ms 0.648mm(H)0.648mm(V) 50000 hours 1080P/1080i/720P/576P/480P Standard, Bright, Soft, User Standard, Full Screen, 4:3. Wide, Subtitle Yes Yes 3D Yes Yes Yes 2 PAL/SECAM BG/DK/I/L/L' VHF,UHF,CATV 2 X 3", 2 X 1 " 15W X 2 Dual Sound/Nicam BBE Yes Yes Yes Yes USB + CF/SD card reader, Optional MP3/WMA/JPEG/MPEG1/MPEG4(Divx) stream media compatible 1000 pages No No 1 rear 1 side 1 side 1 rear No 1 rear
Diagonal Size Aspect Ratio Display Color Brightness Contrast Ratio Viewing Angle Resolution Response time Pixel pitch Lamp Life
Video Capability(HD Ready) Picture Mode Variable Aspect Ratio PIP PBP/POP Digital Comb Filter 3:2 Pull Down DCTi/DLTi Flesh Tone Correction
Tuner TV System RF Signal
Speaker Audio Output Stereo System Surround System
Channel Label Channel Rename Sleep/Alarm Timer Picture Freeze Flash Card Reader
*Teletext *V-Chip *CCD Input
VGA Audio L/R PC Stereo Audio RS232C *Scart(AV signal in/out) Output Earphone Audio L/R Composite Coaxial Digital Auido Optical Digital Audio
1 rear 1 rear, 1 side 1 rear No 2 rear 1 side 1 rear No No 1 rear (ONLY FOR HDMI) English, German, French, Spanish, Swedish,Norwegian,Finnish,Dutch ~100-240 V 150 W <1 W 14.677x98.5x521.5 677x295x570 805x380x705 126/20Q;258/40Q;258/40HQ Yes Yes Yes Yes No 1x Power cord; 1x AV cord WM26A
1 rear 1 rear, 1 side 1 rear No 3 rear 1 side No No 1 rear (ONLY FOR HDMI) 1 rear (ONLY FOR HDMI) English, German, French, Spanish, Swedish,Norwegian,Finnish,Dutch ~100-240 V 190 W <1 W 20.7 26.5 810x106x603.5 810x295x666 945x376x760 108/20Q;222/40Q;222/40HQ Yes Yes Yes Yes No 1x Power cord; 1x AV cord WM32A
1 rear 1 rear, 1 side 1 rear No 3 rear 1 side No No 1 rear (ONLY FOR HDMI) 1 rear (ONLY FOR HDMI) English, German, French, Spanish, Swedish,Norwegian,Finnish,Dutch ~100-240 V 250 W <1 W 26.5 32.5 944x113x676 944x340x728 1105x435x835 52/20Q;106/40Q;159/40HQ Yes Yes Yes Yes No 1x Power cord; 1x AV cord WM37A
1 rear 1 rear, 1 side 1 rear No 3 rear 1 side No No 1 rear (ONLY FOR HDMI) 1 rear (ONLY FOR HDMI) English, German, French, Spanish, Swedish,Norwegian,Finnish,Dutch ~100-240 V 280 W <1 W 28.1000x106x697 1000x340x746 1152x448x859 50/20Q;102/40Q;153/40HQ Yes Yes Yes Yes No 1x Power cord; 1x AV cord WM40A
OSD LANGUAGES POWER
Requirement Consumption(On/working) Consumption(Standby)
Dimension(WxDxH)(mm) Without stand
With stand Package
Loading Capacity Accessories
Quick Guide User's manual Warranty Card Remote Control Battery Others
VESA Standard (400mm x 200mm), Optional VESA Standard (400mm x 200mm), Optional
TX-37LZD85F W450 SE LS-L1260NL Logicom L560 AF360FGZ PM-80 KD-G311EY Samsung B520 8502 NGV Chicago SW EY6409 51MP392H XP3 20 Speakers RD1028 DCR-DVD201E DCR-TRV19 1 1E F-1 8G CDM-7892R VP-D905 EMP-TWD10 Smac1200 C-S5VL 20U83B TL-SL2452WEB KX-T7633 Watch B080 A Pain Papagei FS370 Fisheye-nikkor C109STF Xone XD40 MX602A DOD FX7 Asko 1474 Kxtg7321E WS1501 DPP-FP55 CK-20W DVD-F65 KX-TG2248 RX-DT530 SGH-J208 Iexcl 250 Framemaker 7 FX-9750GII FA826hydro Dreamweaver GDR8162B Cottage FST-ZX100D NV-DS30A Traffic Elna 5300 DT92E H1915 KT600 RAK25NH4 IC-A21 Axorn 65 LE22B450c4H PMC-17A XC-3000IF BR-1180CD KXF90 Kx-tga270 28C-DB500 Voice CN Review Kameleon 4 Elna 2300 50-200 F27650 953BW VUP861NB Yamaha CS01 0 0 WA 1000 DFL-200 K1200 Scenic 321 Motorola W755 Photosmart B109 DMC-TZ7 DX4530 Amplifier C-V350 GR-D320E GR-D740EK VA-5200 Motorola V557 PDK-TS04 Encore B Psae8 LPT-EP553PS W2242S-PF BAR112hgla RT22dasw Indigo II
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101