IC PLUS CORP.

IP100 Test Report

Summary

Item Description No. 1. Basic Function Test 1.1 Test Environment 1.2.1 EEPROM Function Test 1. EEPROM Read / Write 1.2.2 LED Display Test 1. 10/100 Speed LED 2. Link / Activity LED 3. Full / Half LED 1.2.3 NWAY Auto-negotiation Test 1. 10 Half Duplex Link Check 2. 10 Full Duplex Link Check 3. 100 Half Duplex Link Check 4. 100 Full Duplex Link Check 1.2.4 Force Mode Test (Disable Auto-negotiation) 1. 10 Half Duplex Link Check 2. 10 Full Duplex Link Check 3. 100 Half Duplex Link Check 4. 100 Full Duplex Link Check 1.2.5 Register Read/ Write Test 1. PCI Register R/ W 2. NIC CSR Register R/ W 3. MII Register R/ W 1.2.6 Internal Loop Back Test 1.2.7 External Loop Back Test 1.2.7.1 UTP Loop Back 1.2.7.2 Fiber Loop Back Ping-Pong Function Test Chain mode run 12 hours Novell Lantest Novell Endurance Test Chain mode run 24 hours Novell CC Test Chain mode run 24 hours

Date 2002-Nov-18

Test Result

Page 3

PASS PASS PASS PASS PASS PASS PASS

2. 3. 4. 5.

Item Description No. 6. Novell Performance 3 Test 7. Microsoft Hardware Compatibility Test (Driver Test) 1. Win2000 HCT (100F) 2. Win-ME HCT (100F) 7.1 Environment Setup 7.2 Test Result 7.3 Plug and Play Test 8. Compatibility Test 8.1 Switch (PHY) Compatibility Test 1. D-Link des-1008D 2. Kendin switch 3. IP178A 4. Altima 5. IP175 8.2 Smartbits 7410B Compatibility Test 1. Smartbits 9. Link Reliability Test 9.1 Plug & Unplug Test 9.2 Power On/ Off Test IEEE 802.3 TX Pattern Test Wake ON LAN Boot Rom Test EMI Test

Test Result PASS PASS

Page 10
PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS

10. 11. 12. 13.

1. Basic Function Test
1.1 Test Environment Software Test Program: BGO.EXE (Version: 12/17/2001, file size: 182,758) OS: DOS 6.22 or Pure Win98 DOS Hardware Equipment PC * 1 LAN Card * 2
Model ASUS P2B-F PII-BX Realtek 8139C, IP100 NIC

Speed 450 10/100 Mbps

1.2 Test Condition & Test Result 1.2.1 EEPROM Function Test Setup: EEPROM Read / Write Timing conformance Subject: Make sure EEPROM read/write function is ok. Test Result: PASS
1.2.2 LED Display Test Setup: 10/100 Speed LED Link / Activity LED Full / Half duplex LED Subject: Make sure led indication is normal in different operation mode. Test Result: PASS Condition 1 No link 2 100M Full 3 100M Half 4 10M Full 5 10M Half Result PASS PASS PASS PASS PASS
1.2.3 NWAY Auto-negotiation Test Setup: 10 Half Duplex Link Check 10 Full Duplex Link Check 100 Half Duplex Link Check 100 Full Duplex Link Check Subject: Force NIC in different operation mode and check link status. Test Result: PASS Condition 1 100M Full 2 100M Half 3 10M Full 4 10M Half Result PASS PASS PASS PASS Note
1.2.4 Force Mode Test (Disable Auto-negotiation) Setup: 10 Half Duplex Link Check 10 Full Duplex Link Check 100 Half Duplex Link Check 100 Full Duplex Link Check Subject: Force NIC in different operation mode and check link status. Test Result: PASS Condition 1 100M Full 4 100M half 10M full 10M half Result PASS PASS PASS PASS Note IP100 LED will indicate 100Full, but RLT8139C will be in 100 Half IP100 LED will indicate 10Full, but RLT8139C will be in 10 Half
1.2.5 Register R/W Test Setup: PCI Register Read / Write NIC CSR Register Read / Write MII Register R/ W Subject: Verify Read / Write PCI and CSR register. Test Result: PASS 3 Condition PCI register Read/Write NIC CSR register Read / Write MII register Read / Write

Result PASS PASS PASS

1.2.6 Internal Loop Back Test Setup: 1. Chain mode run for 4 hours Subject: Run internal loop back test in chain mode. Test Result: PASS Condition hours Result PASS Note No Packet Loss
1.2.7 External Loop Back Test 1.2.7.1 UTP External Loop back Test Setup: Use RJ45 connector to connect TX to RX. Chain mode run for 4 hours Subject: Run external loop back test in chain mode. Test Result: PASS Condition Result hours PASS 1.2.7.2 Fiber External Loop Back Test Setup: Use a fiber to connect TX to RX. Chain mode ran overnight test Subject: Run external loop back test in chain mode. Test Result: PASS Condition 1 Approximately 10 hours Result PASS Note Note No Packet Loss
2. Ping-Pong Function Test
2.1 Test Environment Server/ No. LAN card Client Server IP100
Mother Board ASUS - TUSL2-C
CPU Intel Celeron 1GHz Intel Celeron 1GHz

RAM 128M

Cable Length 120m

Client

ASUS TUSL2-C
Test Program: BGO.EXE (Version: 12/17/2001, file size: 182,758) OS: DOS 6.22 or Pure Win98 DOS

cross over UTP Client Server
2.2 Test Result PASS Server/ Client Server Client Server/ Client Server Client Speed/ Duplex 100M Full 100M Full Speed/ Duplex 10M Half 10M Half Testing Time 12 hours 12 hours Testing Time 4 hours 4 hours Result PASS PASS Result PASS PASS Note No Packet Loss No Packet Loss Note No Packet Loss No Packet Loss

3. Novell Lantest

3.1 Test Environment Server/ No. NIC card Client IP100 Server1 X2 Realtek Server2 8139D X2 Realtek Client 8139D HUB: D-Link DE-808TP Driver version: 2.0.0 Filename: st201.lan
Mother Board GigaBYTE GA-7ZX Asus TUSL2-C A-Open AX4B
CPU AMD athlon 1.1 G Celeron 1G P4 1.6G

RAM 128M 128M 256M

Cable Length 3m 3m 3m

Novell LANTest

Hub 10Mbps

Prot 1 Port 2 Port 3

Network A

Device under test

NIC 1 NIC 1
Network B Server 2 OS: Netware 5X Server 1 OS: Netware 6X Test Configuration

Client OS: Windows 2000

3.2 Test Result PASS Server/ Client Server1, Server2 Client Result PASS PASS

4. Novell Endurance Test

4.1 Test Environment Server/ No. LAN card Client
IP100 Intel Giga NIC Client 1 82543GC Intel Giga NIC 2 82543GC Intel Giga NIC 3 82543GC Intel Giga NIC 4 82543GC Intel Giga NIC 5 82543GC Intel Giga NIC 6 82543GC Intel Giga NIC 7 82543GC Switch: D-Link DES-1008D Driver version: 2.0.0 Filename: st201.lan Server

Mother Board

Asus P4B Asus P4T/Wol/WOA MSI K7N420 AOPEN AK77-PRO ASUS TUV4X/533/WOA/ ASUS A7M266/550/WOL/ Asus TUSL2-C Asus TUSL2-C
P4 1.6G P4 1.5G AMD Atholon 1G AMD Atholon 1G Celeron 1.3G AMD Atholon 1G Celeron 1G Celeron 1G
128M Rambus 128M 128M 128M 128M 128M 128M 128M

Cable Length

3m 3m 3m 3m 3m 3m 3m 3m

Server

Switch
Client 1 Client 2 Client 3 Client 4

Client 5

4.2 Test Result
PASS Server/Client Server Client No. 7 Speed/ Duplex 100M Full 100M Full 100M Full 100M Full 100M Full 100M Full 100M Full 100M Full
Testing Time 24 hours 24 hours 24 hours 24 hours 24 hours 24 hours 24 hours 24 hours
Result PASS PASS PASS PASS PASS PASS PASS PASS
Note No Error No Error No Error No Error No Error No Error No Error No Error
5. Novell Copy & Compare Test
5.1 Test Environment Server/ No. LAN card Client Server IP100 Client 1 IP100 Driver version: 2.0.0 Filename: st201.lan

Mother Board Asus TUSL2-C A-Open AX4B

CPU Celeron 1G P4 1.6G

RAM 128M 256M

Cable Length 3m 3m

5.2 Test Result PASS Server/ Client Server Client Speed/ Duplex 100M Full 100M Full Testing Time 24hours 24hours Result PASS PASS Note No Failure No Failure
6. Novell Performance 3 Test
6.1 Test Environment Server/ No. NIC card Client

Server Client 1 IP100

Asus P4B
Intel Giga NIC Asus P4T/Wol/WOA 82543GC Intel Giga NIC 2 MSI K7N420 82543GC Intel Giga NIC 3 AOPEN AK77-PRO 82543GC Intel Giga NIC ASUS 4 82543GC TUV4X/533/WOA/ Intel Giga NIC ASUS 5 82543GC A7M266/550/WOL/ Intel Giga NIC 6 Asus TUSL2-C 82543GC Intel Giga NIC 7 Asus TUSL2-C 82543GC Switch: D-Link DES-1008D Driver version: 2.0.0 Filename: st201.lan
6.2 Test Result PASS Server IP100 Speed/ Duplex 100M Full Maximum (K bytes) 11387.98 Average (K bytes) 11344.78 Note
7. Microsoft Hardware Compatible Test (HCT)
7.1 Test Environment Server/ Cable NIC card Mother Board CPU RAM Client Length Support device 3 IP100 Intel Server MSI-MS 6398 128M 2m P4 1.6G Ethernet card 2 Dlink530 Test device 1 IP100 ASUS-P4B266 Intel Client Support device 2 IP100 128M 3m P4 1.6G Ethernet card 1 Dlink530 OS: Win2000/ Win-Me Driver version 2.5.4.0 LAN cards work at 100M full duplex. Switch: Accton 3008A Switch Domain 1 (test domain): test device 1, support device 2, and support device 3. Domain 2: Ethernet card 1 and Ethernet card 2
7.2 Test Result 7.2.1 Win2000 HCT-100M full duplex Test Condition: OS: Win2000 Driver version 2.5.4.0 LAN cards work at 100M full duplex. Test Result: PASS No. Test item 1 NDIS Functional Testing 2 NDIS Performance Testing 3 NDIS Stress Testing 7.2.2 Win-Me HCT-100M full duplex Test Condition: OS: Win2000 Driver version 2.5.4.0 LAN cards work at 100M full duplex. Test Result: PASS No. Test item 1 NDIS Functional Testing 2 NDIS Performance Testing 3 NDIS Stress Testing
7.3 Plug and Play Test Test Condition: Test whether IP100 will automatically setup under all Microsoft Windows Test Results No. OS Result Note 1 Windows 95 No Plug and Play 2 Windows 98 No Plug and Play 3 Windows Me No Plug and Play 4 Windows 2000 Plug and Play Driver is Sundance 1.Windows XP Plug and Play Driver is Sundance 1.05

8. Compatibility Test

8.1 Switch (PHY) Compatibility Test 8.1.1 Test Environment Master / No. NIC card Mother Board CPU Slave Smartbits Master 0 SX-7410B 2000 ASUS Intel Slave IP100 TUSL2-C Celeron 1GHz Kendin 1 Switch Marvell 2 Switch Switch 3 IC+ 178A D-Link 4 Des1008D 5 IC+ 175
128M 130m~2m 130m~2m 130m~2m 130m~2m 130m~2m
Software: 1. Client: BGO/ Rx Tx test, 2. Server: Smart window 7.00.26 Test Criteria: 1.Server: Smartbits send 1,000,000 packets (random data, random length) to Switch. 2. Client: Receive packets from switch, make sure no packet loss

Switch Master Slave

8.1.2 Test Result PASS Cable length 130m 120m 110m 100m 90m 80m 70m 60m 50m 40m 30m 20m 10m 2m Switch Kendin 5p Marvell 5p IC+ Switch Switch IP178A PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Note D-Link Des1008D PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS IC+ IP 175 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS

8.2 Smartbits 7410B Compatibility Test 8.2.1 Test Environment Master / No. NIC card Mother Board Slave Master 0 IP100 ASUS K7V

CPU AMD K7 - 800MHz

RAM 512M
Smartbits 7410B Software: BGO/ Ping Pong test Smartbits: set to be echo mode Test Criteria: Rx 10,000,000 packets, no packet loss

130m~0m

cross over UTP Master

Smartbits 7410B

8.2.2 Test Result PASS Cable Smart bit length 7410B 130m PASS 120m PASS 110m PASS 100m PASS 90m PASS 80m PASS 70m PASS 60m PASS 50m PASS 40m PASS 30m PASS 20m PASS 10m PASS 2m PASS
Note No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss No Packet Loss

9. Link Reliability Test

9.1 Plug / Unplug test 9.1.1 Test Environment

UTP IP100

D-Link DES-1008D switch
( Relay on/off automatically )
Test Time: over night Test Criteria: Link is ok if relay is on. 9.1.2 Test Result PASS
9.2 Power On / Off Test 9.2.1 Test Environment
D-Link DES-1008D switch ( power on /off )
Test Criteria: Link is ok after switch power on/ off 100 times 9.2.2 Test Result PASS
10. IEEE 802.3 Transmit Pattern Test
10.1 100BASE-T Test Result Measured Item (1) Transmit Eye Diagram (2) Transmit Jitter (3) Differential Output Voltage (+ Vout) (4) Differential Output Voltage (- Vout) (5) Rise and Fall Times [0]~[1] (6) Rise and Fall Times [1]~[0] Specification Measured Value Measured Result PASS PASS PASS PASS PASS PASS
With Waveform Limit With Waveform Limit < 1.4 ns 440 ps 0.95V~1.05V 0.95V~1.05V 3~5 ns 3~5 ns + 960mv - 960mv 3.797ns~4.201ns 3.951ns~4.593ns
10.2 10BASE-T Test Result Measure Item (1) Idle Pulse Waveform (2) Idle Pulse Waveform with 100m UTP3 cable (3) Link Pulse Waveform (4) Link Pulse Waveform with 100m UTP3 cable (5) Transmit Waveform Jitter (6) Transmit Waveform Jitter with100m UTP3 cable (7) Transmit Waveform with 100m UTP3 cable (8) Peak Differential Output Voltage (50 ns data packet) (9) Peak Differential Output Voltage (100 ns data packet) Specification Within Waveform limit Within Waveform limit Within Waveform limit Within Waveform limit < + / - 8ns < + / - 8ns Within Waveform limit 2.2~2.8 V Measure Value With Waveform Limit With Waveform Limit With Waveform Limit With Waveform Limit 3 ns 5 ns Within Waveform limit 2.26 V Measure Result PASS PASS PASS PASS PASS PASS PASS PASS

2.2~2.8 V

2.26 V
10.3 Measured Waveform: 10.3.1 100Base-T: (1) Transmit Eye Diagram:

(2) Transmit Jitter:

(3) Differential Output Voltage (+Vout):
(4) Differential Output Voltage (-Vout):
(5) Rise and Fall Times ([0]~[1]):
(6) Rise and Fall Times ([0]~[-1]):
10.3.Base-T: (1) Idle Pulse Waveform:

(2) Idle Pulse Waveform With 100m UTP3 Cable:

(3) Link Pulse Waveform:

(4) Link Pulse Waveform With 100m UTP3 Cable
(5) Transmit Waveform Jitter:
(6) Transmit Waveform Jitter With 100m UTP3 Cable:
(7) Transmit Waveform With 100m UTP3 Cable:
(8) Peak Differential Output Voltage (50ns)
(9) Peak Differential Output Voltage (100ns data packet)

11. Wake ON LAN

11.1 Item Magic Packet Result PASS

12. Boot Rom Test

12.1 Item Boot Rom Test Result PASS

13. EMI Test

13.1 Item EMI Class B Test Result PASS