WIRING DIAGRAM BY MODEL

This document describes car models to which the AFC neo (Product code: 401-A917) is applicable, and ECU terminal arrangement drawings. For the operating method and precautions for the AFC neo, refer to the Instruction Manual. When installing the AFC neo, both this document and the Instruction Manual are required. Even if the car model and manufacturing year coincide with the contents described in this document, this product may not be installed in certain specification vehicles or remodeled vehicles. The manufacturing years of applicable vehicles are as of February, 2006. For the latest vehicles applications, Please contact your local APEXERA Office or dealer for more information.

Contents

Safety Precautions
Safety messages and their meanings _______________________________ WARNING _________________________________________________ CAUTION _________________________________________________ R E Q U E S T _________________________________________________ 8 9

Installation

Connection ______________________________________________________ Connection diagram ______________________________________________ ECU layout ______________________________________________________ Viewing ECU pin layout ___________________________________________
Table of Applicable Models... 10 ECU Terminal Arrangement Table.. 18
Table of Applicable Models... 23 ECU Terminal Arrangement Table.. 28
Table of Applicable Models... 31 ECU Terminal Arrangement Table.. 36
Table of Applicable Models... 41 ECU Terminal Arrangement Table.. 43
Table of Applicable Models... 44 ECU Terminal Arrangement Table.. 46
Table of Applicable Models... 48 ECU Terminal Arrangement Table.. 50
Table of Applicable Models... 52 ECU Terminal Arrangement Table.. 54
Table of Applicable Models... 56 ECU Terminal Arrangement Table.. 57 2
Please read "Safety Precautions" carefully to operate the product with safety.
Safety messages and their meanings

WARNING

This indicates the existence of potential hazard that may result in death or serious injury of the operator or third persons if the product is wrongly operated in disregard of this indication.

CAUTION

This indicates the existence of potential hazard that may result in injury to the operator or third persons, and that will result in only physical damage if the product is wrongly operated in disregard of this indication.

REQUEST

This indicates the contents of a failure in obtaining the full performance of the product or a product failure or faulty function item if the product is wrongly operated in disregard of this indication.
Be sure to remove the negative terminal of the battery before
working on wiring Do not work on wiring with the battery connected. This may cause a fire, electric shock, or other failures. In this case, we shall disclaim all responsibility for any damage or loss to the customer and third persons. Do not use this product for any application other than applicable vehicles or applicable goods. We will not guarantee any operation in vehicles other than indicated in this manual. Such an operation may cause an accident, fire or other failures. Do not install this product in an unstable place that may interfere with driving This may interfere with driving, resulting in a traffic accident.
Do not tamper, disassemble, or modify this product.
This may cause an accident, fire, electric shock, or damage.
Do not use an Electro-Tap
This may cause a malfunction or failure. Be sure to secure a connection with the accessory plug and splicer.
Insulate connections and unused harnesses
If a connection or unused harness touches your body, a fire, electric shock, or other failures may occur.
Do not run a harness around hot, humid, and movable areas of a vehicle
This may cause a malfunction, fire, or other failures.
If you feel that the product is abnormal, stop operating it immediately
If this product gives out smoke or offensive smell, stop operating the product immediately and notify the office that is indicated on the back cover of this manual.

Regarding the installation of this product, be sure that it is installed by an experienced professional. After the product is installed, hand this manual, instruction manual, and warranty to the customer (user). To remove the connector, hold it without pulling on its harness. Also use the connector without exposing its harness to excessive force. This product may cause noise interference with radio, TV, etc. depending on the mounting location and the routing of the signal harness.
Before installing this product, be sure to remove the negative terminal of the battery.

Connection

Connecting the plug
1, Peel off the coating of the wires about 5 [mm] 2, Cover with a sleeve 3, Fold the wires 4, Caulk securely Caulk the conductors by these portions
Caulk the coating by these portions Please move the sleeve to the caulked position when finished the caulking. Make the caulking thrust into the wire

Insulating a splice

1, Remove 5 [mm] of the wire cover from the connecting wire 2, Strip 10 [mm] from the other connection wire 3, Wrap the two wires together 4, Securely fasten together other connection wire
5, be sure to cover the connection with electrical tape
Make the caulking thrust into the wire

Connection diagram

Vehicle with hot wire, flap, and pressure sensor
Vehicle harness Engine control computer (ECU)
To illumination power for audio, etc.
Red wire: IG Power Red and white wire: IG Power Green wire: rpm Gray wire: Throttle signal Brown wire: Ground Ground Black wire: Yellow wire: Airflow and pressure signal output White wire: Airflow and pressure signal input Orange wire: Illumination power

Vehicle with RB26DETT

Red wire: IG Power Red and white wire: IG Power Green wire: rpm Gray wire: Throttle signal Brown wire: Ground Black wire: Ground

splice

Plug receptacle

Branching harness

Yellow wire: White wire: Blue wire: Orange wire: Airflow signal output Airflow signal input 1 Airflow signal input 2 Illumination power
to be worked on separately
Insulate connections and the ends of unused harnesses; otherwise a fire, electric shock, or damage to electrical equipment may occur.
Vehicle with Karman sensor
Red wire: IG Power Plug Red and white wire: IG Power Green wire: rpm Gray wire: Throttle signal Plug receptacle Brown wire: Ground Black wire: Groundi Brown and white wire: Karman signal output Black and white wire: Karman signal input Orange wire: Illumination power

Vehicle with VTEC

Red wire: IG Power Red and white wire: IG Power Green wire: rpm Gray wire: Throttle signal Ground Brown wire: Ground Black wire: Light green wire: Purple wire: Pink wire: Yellow wire: White wire: To illumination power for audio, etc. Unconnection, Insulate VTM signal () VTEC signal input VTEC signal output Airflow and pressure signal output Airflow and pressure signal input

Orange wire: Illumination power Some vehicles do not have VTM signals.
Insulate connections and the ends of unused harnesses; otherwise a fire, electric shock, or damage to electrical equipment may occur. 7

ECU layout

For details on working on the ECU, see symbols in the location column of
the applicable vehicle list from page 10.
A : Lower part of the passenger seat dash side B : Right side of the glove box C : Foot position of the passenger seat D : Inner part of the glove box E : Inner part of the center console F : Under the drivers seat G : Under the passenger seat H : Near the steering column I : Left side of the meter panel J : Lower part of the drivers seat dash side K : Left side of the center console L : Engine room M : Before the rear trunk N : Behind the drivers seat O : Behind the passenger seat P : Upper inner part of the center console

Viewing ECU pin layout

The ECU pin layout shows the connectors viewed in the direction of the arrow mark. The orientation of the ECU depends on the vehicle with ECU pins. Install the ECU fully checking the shape of each connector and the number of pins.
Table of Applicable Models (TOYOTA)
Explanation of sensor type indication Example PR-3 Sensor type Sensor number
Car Name Car Model Engine Model Manufacturing year. CELSIOR CROWN ROYAL CROWN ATHLETE CROWN MAJESTA CROWN ESTATE CROWN . SOARER . . . .. . . ECU Position

Terminal Drawing

Remark s

Sensor Type

ARISTO

Car Name

Car Model

Engine Model

Manufacturing year.

ECU Position

Remarks

SOARER

Turbo A
. SUPRA . MARK II MARK II BLIT MARK II QUALIS MARK II CRESTA CHASER . . . ..

VEROSSA

MARK II 96.900.9

Car Model

Engine Model

ECU Position

Terminal Drawing

M/T A/T M/T A/T

CELICA
M/T A/T M/T A/T With TRC A/T Without TRC With TRC Without TRC

CURREN

Terminal Drawing

Sensor Type

M/T A/T M/T A/T With TRC A/T Without TRC With TRC Without TRC

CARINA ED CORONA EXIV

. .
. . . M/T 2WD A/T 4WD A/T FF With TRC FF Without TRC 4WD M/T 4WD A/T FF A/T 4WD M/T 4WD A/T M/T A/T M/T . . A/T A/T M/T

CALDINA

COROLLA FX

COROLLA SPRINTER

A/T M/T A/T
. LEVIN TRUENO . CERES MARINO . .

M/T A/T A/T M/T A/T Including Sequential M/T M/T A/T M/T M/T A/T

ALTEZZA ALTEZZA GITA

Manufacturing year

Remarks M/T A/T

STARLET

M/T A/T

M/T A/T

M/T A/T M/T A/T

VITZ FUNCARGO

. With Steer matic

Car Model
COROLLA COROLLA RUNX ALEX COROLLA SPACIO WiLL VS ALLION . . . .

. / /

COROLLA FIELDER

. .

WiLL CYPHA

Engine Model

PLATZ WINDOM ESTIMA ALPHARD VOLTZ . . . .

..

SIENTA PASSO
Set the number of cylinders 1
ECU Terminal Arrangement Table (TOYOTA)

Pressure signal

Ground

Throttle signal

IG power
Ground IG power Without throttle signal

Airflow signal

Karman signal

Ground Throttle signal

Without throttle signal
Ground Without throttle signal
Airflow signal /pressure signal
IG power Throttle signal Turbo A pressure signal

IG power Throttle signal

Pressure signal rpm Pressure signal
IG power Throttle signal Ground Throttle signal
Throttle signal Ground Ground

rpm Airflow signal

Ground Pressure signal
Airflow signal/pressure signal

IG power Pressure signal

rpm (Set the number of cylinders 1 at initial setting.)
Table of Applicable Models (NISSAN)
Car Name PRESIDENT INFINITY Q45 CIMA Car Model CIMA CIMA CIMA Engine Model LEOPARD LEOPARD J FERIE CEDRIC GLORIA . . . . . . Manufacturing year. ECU Position

Terminal Drawing

Sensor Type

FAIRLADY Z

Car Name CEDRIC GLORIA

Engine Model

. CEFIRO CEFIRO WAGON LAUREL SKYLINE .

.

Car Name SKYLINE

ECU Position

Sensor Type
STAGEA STAGEA AUTECH Ver.260RS

BLUEBIRD SYLPHY

Except the Lean Burn

BLUEBIRD

SILVIA

180SX

Manufacturing year..

Remarks Except the N1 Specification
PULSER PRIMERA PRIMERA WAGON . AVENIR SUNNY NX COUPE MARCH . . .

Except the M/T

Including CGA3DE

Car Model Z11

ECU Position
CUBE Z10 TERRANO X-TRAIL WINGROAD ELGRAND BASSARA

/

ECU Terminal Arrangement Table (NISSAN)
Airflow signal Without throttle signal

Airflow signal Ground

Airflow signal 1
Ground Throttle signal IG power Airflow signal 2

Throttle signal IG power

IG power Throttle signal Without throttle signal
rpm Airflow signal Ground

IG power Ground

Ground IG power
Pressure signal rpm IG power
Table of Applicable Models (HONDA)
Car Name Car Model LEGEND INSPIRE PRELUDE ACCORD EURO R ACCORD . A/T . M/T A/T M/T . . . With TC Without TC . Engine Model Manufacturing year. ECU Position
Terminal Drawing Sensor Type
Remarks Impossible of V/T Control setting

A/T M/T A/T M/T

ACCORD WAGON

A/T M/T

TORNEO EURO R

TORNEO

A/T M/T

M/T A/T M/T A/T

INTEGRA (Including the 98 specification)

CIVIC . . .

VTEC Type B

CIVIC

Except the VTEC
Except the Carburetor and VTEC-E

CIVIC FERIO

CIVIC COUPE

CR-X CR-V

S2000 AIRWAVE

Remarks

. .

ODYSSEY

/

STEP WGN

ELYSION

LIFE LIFE DUNK

CAPA STREAM

. . . .

FIT FIT ARIA THATS MOBILIO

. . .

MOBILIO SPIKE
ECU Terminal Arrangement Table (HONDA)
There might not be free space of connector

rpm Throttle signal

rpm IG power Pressure signal IG power Pressure signal
rpm IG power Pressure signal

VTEC signal

VTM signal
Throttle signal 2 Ground 1 Please select either ground 1 or ground 2.
There might not be free space of connector VTEC signal
Throttle signal case of K24A
Throttle signal case of K20A
Table of Applicable Models (MITSUBISHI)
Car Name Car Model Engine Model Manufacturing year. DIAMANTE . DIAMANTE WAGON GTO . . ECU Position
Terminal Drawing Sensor Type

Without MIVEC

With MIVEC Without MIVEC With MIVEC DOHC
. FTO . LEGNUM GALANT ECLIPSE LIBERO .
Without MIVEC Without MIVEC With MIVEC

Including

LANCER EVOLUTION LANCER
. RVR ek WAGON ek SPORTS . . MIRAGE MIRAGE DINGO AIRTREK . .

MIVEC

ECU Terminal Arrangement Table
Karman signal/Pressure signal
Pressure signal Throttle signal

Ground rpm

Ground IG power rpm Throttle signal IG power Ground Throttle signal

Ground IG power rpm

Table of Applicable Models (MAZDA)

Car Name Car Model

EUNOS COSMO

Sensor Type Remarks

.. .

ROADSTER

FAMILIA AZ-WAGON DEMIO
Set the number of cylinders 1

Engine Model

ATENZA SPORT ATENZA SPORT WAGON .

ATENZA SEDAN VERISA

Ground Ground Throttle signal Pressure signal Throttle signal rpm
rpm Without throttle signal
Airflow signal Pressure signal Throttle signal
Throttle signal Airflow signal
rpm (Set the number of cylinders 2 at initial setting.)
Table of Applicable ModelsSUBARU
Car Name Car Model Engine Model . . . . . . . . FORESTER . . . . . Manufacturing year ECU Position

LEGACY B4

LEGACY TOURING WAGON

LEGACY

Car Model

Remarks Including Spec C

. . .

IMPREZA

. . SOHC S/C Except the Mild Charge .
Airflow signal Throttle signal

Throttle signal Ground

Ground IG power Throttle signal rpm
Table of Applicable Models
Car Name Car Model Engine Model . ALTO WORKS CAPPUCCINO . .. . . . WAGON R PLUS WAGON R WIDE WAGON R SOLIO . . Mild turbo Manufacturing year. ECU Position

Remarks With VVT

WAGON R

MR WAGON

Kei JIMNY
. ALTO LAPIN CHEVROLET CRUZE .
In some SUZUKI vehicles, A HITACHI pressure sensor is used instead of the conventional MITSUBISHI pressure sensor. If any engine malfunction or defect is detected when the sensor type mentioned in the above table is set, check the manufacturer name of the pressure sensor used in the vehicle. If the HITACHI pressure sensor is used, set the sensor type to PR-17.

rpm IG power

Pressure signal Without throttle signal

rpm Pressure signal

Throttle signal IG power Ground Throttle signal
Throttle signal Pressure signal
rpm Throttle signal Pressure signal
Car Name MIRA AVY Car Model MOVE COPEN MAX BOON . . . Engine Model Manufacturing year. ECU Position

MIRA MIRA TR-XX

Throttle signal rpm (Set the number of cylinders 1 at initial setting.)
1. The contents of this document are subject to change without prior notice. 2. The contents of this document have been prepared with extreme care. However, if you find error or other fault, please inform us of it. 3. A part or all of this document may not be reproduced in any form without prior written permission, and also may not used without the prior written permission of APEXERA CO., LTD. under the copyright except for private use. The company names and product names described in this document are the registered trademarks or brands of the respective companies. The names, addresses and telephone numbers mentioned as where to contact are as of April 1, 2007. Note that this information is subject to change.

Revision Record

Edition First edition 2nd edition 3rd edition Date of issue Mar. 1 , 2006 May. 1 , 2006 Apr. 1 , 2007 Part No. of instruction manual 7107-0600-00 7107-0600-01 7107-0600-02 Change of description

APEXERA Co., Ltd.

http://www.apexera.co.jp
Head office : 5-21-3Fujimi, Sagamihara-city Kanagawa,229-0036 JAPAN ph+81-42-768-8148 fx+81-42-768-8072

APEX INTEGRATION INC.

http://www.apexi-usa.co
USA office.: 1449,West Orange Grove Avenue Suite#A,Orenji, CA928828 ph : (714)685-5700 fx : (714)685-5701