Connecting to TV (contd)

AU D IO O U T
S-V ID E O IN V ID E O IN SCART IN
Option 1: Using SCART socket
Antenna or Satellite/Cable TV signal
The scart or Euro AV cable serves as the universal connector for picture, sound and control signals. With this type of connection, there is practically no loss of quality in picture or sound transmission. Have the following cables ready: 1) Antenna cable 2) SCART cable
5 Press STANDBY-ON 2 on the DVD
recorder to turn it on. The message 'IS THE TV ON?' appears on the display panel.

6 Turn on the TV power.

1 Turn off your TV and remove the antenna
cable from your TV (or Satellite Receiver/ Cable Box). Insert it into the ANTENNA IN socket at the back of the DVD recorder.
If the connection has properly made, your TV will automatically turn on to the Video Input channel for the SCART socket and you should see the { Language and Country } menu appears on the TV. If not, select the correct Video In channel at the TV manually until you see the { Language and Country } menu. installation. Helpful Hints: If your TV set has several SCART sockets, select the SCART socket that is suitable for both video output and video input. If your TV set displays a selection menu for the SCART socket, select 'VCR' as the source for the SCART socket. The EXT 2 AUX-I/O socket is intended only for additional devices.
2 Use the supplied antenna cable to
connect the DVD recorders TV OUT socket to the antenna input socket at the back of your TV set.
7 Proceed to page 21 to continue the first
3 Use a SCART cable to connect the DVD
recorders EXT 1 (TO TV-I/O) socket to the SCART socket at the back of your TV set.
4 Connect the power cable from the DVD
recorders ~ MAINS to the power supply.
Option 2: Using S-Video (Y/C) socket

SCART IN

S-V ID E O IN

V ID E O IN

This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and colour signal (C signal) separately. This mini DIN socket is also called a Hosiden jack. Have the following cables ready: 1) Antenna cable 2) S-Video (SVHS) cable (not supplied) 3) Audio cables (red/white, not supplied)
4 Use an audio cable (red/white) to
connect the DVD recorders AUDIO L/R OUT socket to the audio input socket at the back of your TV set (or labelled as AV In or Audio In).
5 Connect the power cable from the DVD
6 Press STANDBY-ON 2 on the DVD
7 Turn on the TV power. Select the correct
Video In channel at the TV (see page 10). The first installation menu { Language and Country } will appear on the TV.

Press 4 to select { Done } and press OK
to save the changes. The first installation is now complete. The first tuned TV channel appears. The DVD recorder is ready for use!
Press OK to exit the initial installation menu. Press RETURN to go back to previous menu item.
Although the DVD recorder selects available TV channels during first installation, you may want to repeat the process later if more channels become available in your area or if you are reinstalling the DVD recorder. Automatic TV channel search This will erase and replace all previously stored TV channels.

TV channel programming

Sorting TV channels according to TV sequence This feature is only available if you have connected the DVD recorder to your TV using the scart socket (EXT 1 TO TV-I/O socket,) see page 11. When the automatic TV channel search function is activated, the TV channels are stored in a specific order. This may differ from the order in which the TV channels appear on your TV. This function changes the order of the TV channels stored in your DVD recorder to match the order on the TV.
1 Press SYSTEM-MENU on the remote
control. The system menu appears on the TV.
2 Press 4 repeatedly to select { Set-up }. 3 Press 2 repeatedly to select { Analogue

Ch. }.

DVD-VIDEO-TITLE 04|CO1 Analogue Ch. STOP

1 Press SYSTEM-MENU.

The system menu appears on the TV.
Set-up Auto search Follow TV Sort Favourites
4 Press 4 repeatedly to select
{ Follow TV } and press 2 to start sorting.
5 Press OK to confirm the message on the 4 Press 4 to select { Auto search } and
press 2 to confirm. The automatic TV channel search starts. This allows the DVD recorder to save all available TV channels. This process may take several minutes. Once completed, the total number of channels found appears on the TV. TV. 'TV 01' will appear on the display panel.
6 Use the TVs remote control to select
programme number {1} on your TV set. Then, press OK on the DVD recorders remote control. If the DVD recorder finds the same TV channel as on the TV set, it stores it as P01. 'TV 02' will then appear on the display panel.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
7 Use the TVs remote control to select
programme number {2} on the TV set. Then, press OK on the DVD recorders remote control. have assigned all the TV channels. Helpful Hints: If you cannot turn on your TV set to programme number {1}, and you have connected additional devices to the EXT 2 AUX-I/O socket, please disconnect these devices. Other connected devices may have switched the TV set to the programme number of the scart socket. If no video signal is received from the TV set, NOTV will appear. Sorting the TV channels You may not agree with the sequence in which the individual TV channels have been allocated to the programme numbers. You can use this function to rearrange all the stored TV channels.

8 Repeat the above steps again until you
4 Press 4 repeatedly to select { Sort } and
press 2 to confirm. A list of TV channel programmes appears.
5 Press to select the TV channel that
you want to change, then press OK to select.

Sort channel

ARD ZDF ORF2 BC2 CHAN RTL4 SBS6

001 ARD

ZDF 007 ORF2 BC2 CHAN RTL4 SBS6
6 Press to shift the TV channel to the
desired position and press OK to confirm. The TV channel will be inserted after the current position.
007 ARD ORF2 BC2 CHAN RTL4 ZDF SBS6
7 Repeat steps 5~6 until you have sorted/
deleted all the TV channels you want.
Setting favourite TV channels You can set your favourite TV channels for quick access by using the channel up/ down button on the remote control. Manual TV channel search In some cases, not all of the available TV channels may have been found and stored during first installation. In this case, you will need to search for and store the missing or coded TV channels manually.
{ Favourites } and press 2 to confirm. A list of TV channel programmes appears.

Favourites

Set-up Entry mode Entry Preset Preset Name MHz 167.5 MHz P 04 RTL4
CH01 CH02 NBC CH03 CH04 CH05 CH06 MTV CH07

Search

5 Press to select the TV channel, then
press OK to choose either delete from or add to the list. The add channels are marked. You can access these channels by pressing on the remote control. The delete channels are unmarked. You can only access these channels by pressing the corresponding number button on the remote control.
4 Press 4 repeatedly to select { Entry
mode } and press 2 to confirm.
5 Press to select manual search based
on channel allocation or frequency, and press 1 to confirm. { MHz} (Frequency) { CH } (Channel) { S-CH } (Special Channel)
6 Press 4 to select { Entry } and press 2
to confirm. Use the alphanumeric keypad 0-9 to enter the frequency or channel of the TV station, then press OK and followed by the matching colour coded button to select { Store }. OR G Press the matching colour coded button on the remote control to select { Search }. The search always goes by increasing frequency or channel number.
7 Press 4 to select { Preset } and press 2
to confirm. Use the alphanumeric keypad 0-9 to enter the preset number for the channel to store (e.g., '01'), then press the matching colour coded button to select { Store }. press 2 to confirm. Use the alphanumeric keypad 0-9 to enter the preset name for the found channel or preset, then press the matching colour coded button to select { Store }. Maximum four characters for preset name. Allocating a decoder Some TV channels send coded TV signals that can only be viewed properly with a purchased or rented decoder. You can connect such a decoder (descrambler) to your DVD recorder (see page 14). The following function automatically activates the connected decoder for the TV channel you want to watch.

8 Press 4 to select { Preset name } and
9 Repeat steps 6~8 to search for other

TV channels.

0 Press 4 to select { TV system } and
press 2 to confirm. Use to select the TV system that produces the least distortion of picture and sound, then press 1 to confirm. The available TV system broadcast format for selection : { PAL-BG, PAL-I, PAL-DK, SECAM-BG, SECAM-DK, SECAM-LL }. See pages 68~69 for more information.
Set-up Decoder TV system Nicam Fine Tune Off On
4 Press 4 repeatedly to select { Decoder }

and press 2 to confirm.

5 Press 2 to select { On } and press OK
to confirm. Your decoder has now been allocated to this TV channel. G To turn off the decoder, press 2 to select { Off }.
If the DVD recorder does not set the time and date correctly, you can set the clock manually by following the steps below.
Fine tuning the TV channels
Setting the time and date
Set-up Decoder TV system Nicam Fine Tune
2 Press 4 repeatedly to select { Set-up }.
To improve the sound transmission of the TV channel NICAM is a digital sound transmission system. Using NICAM, you can transmit either one stereo channel or two separate mono channels. However, if reception is poor and the sound distorted, you can turn off NICAM.
3 Press 2 repeatedly to select

{ Time-date }.

DVD-VIDEO-TITLE 04|CO1 Time-date STOP

Set-up Time Date

1 Move to { NICAM } and press 2 to
select { On } or { Off }.

2 Press 1 to confirm.

To finetune the TV channels
4 Press 4 to select { Time } and press 2 to
enter the time field. { 00 : 00 } (hours : minutes )
1 Move to { Finetune } and press 2. 2 Press to fine-tune the TV channel
manually, then press the matching colour coded button on the remote control to select { Store }.
5 Press to change the first digit and
press 2 to go to the next digit field.
6 Repeat step 5 until the time is entered
correctly, then press OK to confirm.
7 Press 4 to select { Date } and press 2 to
enter the date field. { 00 : 00 : 0000 } (day : month : year).
8 Repeat step 5 until the date is entered
Press 1 to go back to previous menu item. 0Press SYSTEM-MENU to exit the menu.

Setting the language

You can select the language for subtitles and audio for DVD playback. For some DVDs, the subtitle/audio language can only be changed via the DVD disc menu. If the selected language is not available on the disc, the discs default setting language will be used instead. The menu language (on-screen display) for the system will remain as you set it.
2 Press 4 repeatedly to select { Set-up }. 3 Press 2 repeatedly to select

{ Language }.

DVD-VIDEO-TITLE 04|CO1 Language STOP
Set-up Menu Audio Subtitle Country
4 Press to select one of the options

below at a time, then press 2. { Menu }: language of the OSD menu { Audio }: playback audio language { Subtitle }: subtitle language { Country }: location
5 Press to select a desired language

and press 1 to confirm.

6 Repeat steps 4~5 for other settings.
Using this DVD Recorder, you can play and record on the following discs: Recording and Playback DVD+RW (DVD plus
Rewritable); can be recorded on over and over.
DVD+R (DVD plus Recordable); can be recorded only once. Playback only: DVD Video (Digital Versatile
DVD-R (DVD minus Recordable); can only be played back when the recording was made in 'video mode' and the recording was finalised. DVD-RW (DVD minus
Rewritable); can only be played back when the recording was made in 'video mode'.
Inserting a disc 1 Press STANDBY-ON 2 to turn on the

DVD recorder.

2 Press OPEN/CLOSE / on the front of
the DVD recorder. The disc tray opens. G You can also hold down the STOP 9 button on the remote control to open and close the disc tray.

Audio CD (Compact Disc

Digital Audio)

MP3-CD Video CD

(Formats 1.0, 1.1, 2.0)
3 Carefully place the disc into the tray with
the label facing up, then press OPEN/CLOSE /. Make sure the disc label is facing up. For double-sided discs, load the side which you want to play facing up.
Super Video CD CD-R (CD-Recordable) Audio/

MP3 contents

Recordable
4 Turn on the TV power. Select the correct
Video In channel at the TV.
CD-RW (CD-Rewritable) Audio/

ReWritable

5 Playback will start automatically or a
dialogue will appear on the TV (see next page).
Some discs cannot be played on this DVD recorder due to the configuration and characteristics of the disc, or due to the condition of recording and authoring software that was used.

Playable discs

IMPORTANT! If the inhibit icon (Error) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. Do not push on the disc tray or put any objects other than discs on the disc tray. It may cause the disc player to malfunction.

Playback (contd)

Starting disc playback
G If a dialogue appears on the TV showing : { Do you want to access the disc content ?}. Select { Yes } to show the disc content menu (see page 50 Browsing the discs). Select { No } to switch to the last active mode. If you want to remove this dialogue, you have to enable the { Auto play } function (see page 55). G If the pin code entry dialogue appears on the TV, this means that the child lock/ parental control was activated for the inserted disc (see pages 59~60). Use the alphanumeric keypad 0-9 on the remote control to enter your pin code (password). G For more playback features, see pages 32~35 Additional Playback Features. Playing a DVD video disc Normally the DVD disc contains a disc menu. You may have to make your selection (e.g., subtitle or audio language) within the disc menu. Playing a (Super) Video CDs (Super) Video CDs may feature 'PBC' (Play Back Control). This allows you to play the video CDs interactively, following the menu on the display.

Zoom 2

1 Press 4 to select { Audio } and press 2

to enter its options.

2 Press 4 repeatedly until the audio
language you want is selected, then press 1 to confirm. The languages may be numbered or abbreviated, such as En for English. If the language selected is not available on the disc, the discs default setting language will be used instead. Helpful Hint: Some DVDs allow soundtrack language changes only via the DVD disc menu. To access the Disc Menu, press DISC-MENU. Switching camera angles This option is only available with DVDs that contain sequences recorded from different camera angles. This allows you to view the picture from different angles.
[CURSOR][OK] = Zoom In, [RETURN]=Zoom Out, [ZOOM] = Exit

Zoom Out

Zoom In
2 Press OK on the remote to zoom in or

RETURN to zoom out.

3 Use to pan through the zoomed

picture.

4 To exit zoom mode, press
SYSTEM-MENU Time search This option allows you to skip to a specific point in the current disc.
1 Press 4 to select { Time search } and
press 2 to enter the time field. The time shows the elapsed playing time of the current disc (hours : minutes).
1 Press 4 to select { Angle } and press 2
to enter its options. The camera angles available for selection appears.
2 Press to change the digit and press
2 to go to the next digit field. G You may also use the alphanumeric keypad 0-9 to enter the correct digit directly.
2 Press to select the camera angle you
want to switch to, then press 1 to confirm.

3 Press OK to confirm.

Playback skips to the selected time.
Changing to another title/ chapter/track
When a disc contains more than one track, title or chapter, you can change to a different track, title or chapter as follows. During playback, G Press to go to the next title/chapter/ track. G Press to return to the start of the current title/chapter/track. Pressing twice can return to the start of the previous title/chapter/track. OR G Use the alphanumeric keypad 0-9 to input the title/chapter/track number. OR G Press T/C on the remote control to select T (title) or C (chapter). OR G Press BROWSER on the remote control to display the titles list. Then press to select a title and press OK to start playback.
Searching forwards/ backwards

record modes.

Record Mode M2 M2x M3 M4 M6 M8 Picture Quality DVD quality-Standard Play (SP) DVD quality-Standard Play Plus (SP+) S-VHS quality-Long Play (LP) VHS quality-Extended Play (EP) VHS quality-Super Long Play (SLP) VHS quality-Super Extended Play (SEP) Maximum Recording Time per Disc 2 hours 2.5 hours 3 hours 4 hours 6 hours 8 hours
1 Press 4 to select { Language } and press
2 Press 2 to select one of the options.
{ Lang. I } : Original broadcast language. { Lang. II } : Additional audio language (2-channel sound).

3 Press 1 to confirm.

Inserting chapter markers You can insert chapter markers within a title during recording. This lets you access specific points on the recorded disc as you would choose a chapter on a DVD.
1 Press 4 to select { Chapters } and press
2 Press to select one of the options.
{ Off } : Disable this feature. { Standard } : A chapter marker will be automatically inserted during recording, the interval will depend on the recording mode selected.
Direct record function To enable direct recording from your TV set, make sure that the direct record mode is turned on. See page 40 Direct Recording for more information.

Manual recording

Use the 'Manual recording' function to start recording immediately (e.g., to record a TV show already in progress).
1 Press 4 to select { Direct record } and
1 Turn on the TV power. Select the correct
{ On } : Enable recording directly from the TV display. { Off } : Disable direct record function.

2 Insert a DVD+R(W).

If a DVD+RW was inserted that already contains recordings, press to select the location where the recording should be started.
Filter mode For long play or extended play recording, you can select a suitable filter mode to optimise the video recording. The setting does not influence high quality or standard play recording mode.
3 Press TUNER on the remote control to
see the TV programmes, then press to select the programme number you wish to record. G To record from additional device, press button {0} on the remote control and followed by 4 to select the correct input channel that matches the socket to which you connected to the DVD recorder. { CAM 1 } : S-VIDEO or VIDEO and AUDIO L/R sockets at the front { EXT 2 } : EXT 2 AUX-I/O Scart socket at the back { EXT 1 } : EXT 1 TO TV-I/O Scart socket at the back
1 Press 4 to select { Filter } and press 2
{ Standard } : Recording quality is as the recording mode selected. { Sport } : Improve recording of images that move quickly. Optimise the picture quality in record mode M3~M8.

4 Press RECORD 0 to start recording. 5 For recording from external device, you
have to start play on the external device first. G While recording in progress, you can press OK to insert a chapter marker wherever necessary.
MENU UPDATE or CREATE MENU appears on the display panel to indicate that the DVD recorder is writing the list of contents. Wait until the message disappears before removing the DVD+R(W).
6 To stop the recording, press STOP 9.
Manual recording with automatic turn-off (One Touch Recording) 1 Follow the steps 1~3 of Manual

Recording on page 38.

G If the end of a disc is reached during recording, recording will stop and the DVD recorder will turn off automatically.
2 Press RECORD 0 on the remote
control twice to start 30 minutes recording. Each time you RECORD 0 you will add 30 minutes to the recording time. The recorder will stop recording at the designated end time and turn off automatically. G To delete the recording, press STOP 9 while the display showing the recording time. G To check the remaining recording time while recording in progress, press SYSTEM-MENU.
1 During recording, press PAUSE ;.

Pausing a recording

You can use this function to avoid recording commercials.
2 To continue recording, press RECORD 0.
Helpful Hints: If you insert recordings between existing recordings, check the lengths of the old and new recordings. If the new recording is too long the subsequent recording (title/chapter) will be overwritten. The length of recording available depends on the current recording mode and the amount of space available on the disc.
To play a DVD+R on other DVD players, see Playing your recording on other DVD players (DVD+R)

Direct recording

The Direct Record function allows you to record the TV programme which you are currently watching when the DVD recorder is turned off.

Deleting a recording

You can delete a specific recording from the DVD+R(W).
1 Insert a recorded DVD+RW or an
unfinalised DVD+R. The Index Picture screen or disc content menu appears on the TV.

Programming recordings

Timer Recording (contd)
{ Repeat } Select {Weekly}, {Once} or {Mon-Fri} (Monday to Friday) recordings and press OK to confirm. { Record mode } Select a record mode and press OK to confirm. See pages 36~37 Recording settings - Recording mode). { VPS/PDC } Select to turn on or off VPS/PDC mode. For information on VPS/PDC, see page 41. G To clear the timer entries, press the matching colour coded button on the remote control to select { Clear all }. All the settings in the timer menu are cleared. G To cancel the timer programming, press the matching colour coded button on the remote control to select { Cancel }. The timer overview appears. Helpful Hint: Set the timer recording one minute ahead of the programmes start time. This helps ensure the entire programme is recorded as the disc requires about 30 seconds to prepare for recording.
Programming recording from a Cable Box If you have a Cable Box connected to the DVD recorders Scart connection EXT 2 AUX-I/O (see page 14), follow the steps described below to program the recordings.
1 Select the channel you want to record at

the Cable Box.

2 Programme the recording with the
required information. Follow the steps 1~9 of Programming Recording on pages 41~42. { Preset } Select { EXT2 } as the input channel and press OK to confirm.
6 Press the matching colour coded button
on the remote control to select { Store }. The system will store the timer entry and return to the timer overview screen.
7 To exit, press TIMER. 8 Insert a DVD+R(W). 9 Press STANDBY-ON to turn off the
DVD recorder. The DVD recorder must be in standby mode in order for the timer recording to occur. If not, a warning message will appear ten minutes before the recording starts. If you ignore the warning message, the DVD recorder will switch to standby mode automatically before the programmed recording begins. The 'TIMER icon will light up on the display panel if a timer recording is set.
3 Leave the Cable Box on for the

recording.

Changing a programmed recording 1 Turn on the TV power. Select the correct
Deleting a programmed recording 1 Turn on the TV power. Select the correct
The timer overview appears.

TIMER OVERVIEW

10:55 23:45 21:00 06:00 08:00 CNBC Disco BBC2 HBO ABC Weekly 12.04 Daily 16.04 13.04

TIMER DETAILS

Start time Stop time Date Repeat Channel VPS Record Mode 12:00 18:05 15:07:2004 Once 199 BBC24 DVD HQ Off
3 Press to select a timer programme
which you want to delete.
4 Press the matching colour coded button on

+RW | SHREK | EDIT MODE PAUSE
on the remote control to select { Hide }. It will set the chapter for hide. The hiding chapters will only reflect after exit video editing mode. To cancel the hidden chapters
4 Press or to search for the
beginning of the chapter you want to unhide.
5 Press the matching colour coded button

00:01:02

00:00 [EDIT] = Exit No Chapters Chapter Title Hide
on the remote control to select { Show }. It will set the chapter for unhide.

Disc bar

About disc bar In the disc bar, the record playback head represents the actual position of the playback on the disc.
1 Start playback a recorded DVD+RW or

an unfinalised DVD+R.

Editing chapter (merge/split/hide)
Editing title (divide/append/Index picture)
2 Press EDIT on the remote control. 3 Press the matching colour coded button
on the remote control to select { Chapter }. The chapter editing menu appears.
on the remote control to select { Title }. The title editing menu appears.

[EDIT] = Exit

Back Split Hide

Divide

Append

Index Pic.

on the remote control to make your editing. { Merge } Select this to merge the current chapter with the chapter before it. If the two chapters were hidden, then the joined chapter will also be hidden. If only one of the chapters is hidden, then the joined chapter will not be hidden. { Back } Select this to return to the previous screen. { Split } Select this to insert a chapter marker, it will cut the current chapter to two. When the playback is in a chapter which is marked for hiding, then both new chapters will be hidden. { Hide } Select this to hide the current chapter.
4 Once you have found the scene that you
want to use for title editing, press the matching colour coded button on the remote control to make your editing. { Divide } - for DVD+RW only Select this to divide the current title into two new titles. Each of these titles is characterised by its own index picture. Warning! Once a title is divided, it cannot be reversed. { Back } Select this to return to the previous screen. { Index Pic. } Select this to use the current scene as the titles index picture. Note: In the Index Picture screen, normally the first frame of a recording is shown as the titles index picture.
{ Append } - for DVD+RW only Select this to append record to the existing recording from the position of the playback. Continue steps 5~7.

INFO Length Date Child Lock Title Name Title 1 0:1:14 0:0:0
Short Content Description
These functions are displayed in the bottom of the menu wherever applicable. { Delete } Delete the currently selected menu item. { Protect } / { Unprotect } Protect/unprotect the selected title in the DVD+RW. Overwrite or edit the recorded title is not possible if protected. { To Album } Add photo(s) to album.
[PLAY] [RETURN], [BROWSER] = EXIT
G Alternatively, you can press BROWSER on the remote control to access the disc content menu.
2 Press 2 to move to the previous/next
level of information in the menu (e.g. SOURCE, ALBUM, TRACK).

SOURCE Disctray DVD-V

TITLES Title1
Title2 Title3 Title4 Title5 Title6

TITLES

Title1 Title2 Title3 Title4 Title5 Title6
{ Select } Add to the selection. { Select All } Add all items to the selection. { Move } Move photos within photo album. { Remove } Remove the selected item in the list. { Rotate } Rotate the selected photo in 90 degree clockwise increments. { Zoom } Activate zoom mode. { Cancel } Cancel the operation.
3 Press to view the detailed overview
of the selected title/chapter. The content is displayed within two panels, left panel displays the titles of the media and right panel displays the information of the current title.
4 To start playback of the current title,
press PLAY 2. G To change the disc content information, press EDIT (see page 45 Changing the disc/title name). Helpful Hint: The information showed on the display panel varies for different types of media.
Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.
Using the Browser (contd)
Browsing the picture disc
The Media Browser allows you to view the JPEG pictures discs or playback as a slide show or store them in an album. JPEG Photo can handle up to a maximum of 100 photos in one album on a DVD+RW or DVD+R from this DVD recorder, depends on the JPEG file parameters.
3 Press OK to display the picture overview.
The 12 roll thumbnails picture screen appears.
DVD / Photo / Rolls / Roll KYZ

06/06/2004

The supported functions are shown at the bottom of the disc content menu via the colour coded buttons on the remote control. Adding pictures to an album Photo roll is a folder for storing original JPEG pictures and they are protected. It is comparable with a conventional 35mm film for cameras. Rolls will be created automatically from the digital cameras. Photo album contains different pictures on the rolls. You can delete an album without deleting the pictures of the rolls.

{ PBC } - for VCD only Play Back Control allows you to play Video CDs (2.0) interactively, following the menu on the display.
{ On } : The index menu (if available) will appear on the TV once you insert a VCD. { Off } : The VCD will skip the index menu and playback directly from the beginning.
{ Version Info } It provides the software version information for online upgrade. Time-date For more information on this menu, please see page 27 Setting the Time and Date. Analogue channels For more information on this menu, please see pages 23~27 TV Channel Programming.
{ Black level } Adapts the colour dynamic for NTSC disc.
{ Normal } : Normal colour contrast. { Enhance } : Improve the colour contrast and brighten the picture of NTSCcompatible DVD.
{ Horizontal } Allows you to adjust the horizontal position of the picture on your TV screen.
Press to scroll the slider to the left or right. When you are satisfied with the position of the picture, press 4.
{ Video output } Choose the type of video output that matches the video connection between the DVD recorder and your TV.
{ RGBCVBS} : For RGB or CVBS connection. { S-Video } : For S-Video connection. { Automatic } : The output setting will automatically follow the video signal received.
For more information on this menu, please see page 28 Setting the language.
Audio output After connecting the DVD recorder to your TV and other devices, you may need to change the digital output setting. Adjust the Digital Output only if you used the DVD recorders COAXIAL socket.
DVD-VIDEO-TITLE 04|CO1 Audio output STOP

Digital output

{ Digital output }
{ All } : Select this if you use the COAXIAL socket to connect the DVD recorder to a stereo receiver that has a built-in Multi-Channel decoder. { PCM } : Select this if the connected audio equipment is not capable of decoding multichannel audio. Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation). { Off } : Select this to deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect the DVD recorder to a TV or Stereo system.

About Access Control

Access Control limits viewing of discs that exceed the limits you set. We cannot guarantee the availability of Access Control with all discs, and therefore denies any liability associated with unintended watching of discs.
6 Use the alphanumeric keypad 0-9 to
enter your new four-digit pin code. You must enter the same pin code a second time to confirm it. To cancel your change, press 4 to select { Cancel } and press OK to confirm.

Remote control does not work.

Troubleshooting (contd)

Disc will not play. Insert the disc with the label facing up. The child lock is on. Read chapter Setting Access Control Activating/Deactivating the child lock for details. Wrong region code. The DVD must be coded for ALL regions or Region 2 in order to play on this DVD recorder. There is no recording on the disc or wrong disc type. Read chapter Playback - Playable discs for details. Make sure the disc is not scratched or warped. Clean the disc or replace a new one. Check if the disc is defective by trying another disc. Turn on your TV and set to the correct Video In channel. Change the TV channel until you see the DVD screen. Read chapter Connecting to TV - General for details. Check the video connection between the DVD recorder and the TV. The disc does not match with the TV colour system standard (PAL/NTSC). The disc is dirty, clean the disc. Sometimes a small amount of picture distortion may appear. This is not a malfunction. If you set the Record Mode to a low-quality speed, change to a higher-quality speed after you finish recording. Leaving the DVD recorder set to a low-quality speed may affect the picture quality when playing DVDs later. Read chapter Recording - Recording settings for details. The recording can be made in colour only when the TV channels or the connected additional device sends a colour signal. In some situations, programmes that are broadcast in black and white cannot be recorded. Have your antenna or cable TV signal checked. Fine-tune your TV channel. Read chapter Installing the DVD Recorder - Fine tuning the TV channels for details. Do not connect any cables from the DVD recorder to the 'Phono' input of your amplifier. Do not connect the DVD recorders Coaxial DIGITAL AUDIO OUT socket to an analogue socket (red/white) on the connecting devices. Check the audio connections, the red and white sockets. Read chapters Connecting to TV or Connecting to Additional Devices for details. You cannot hear MP3 playback if you are using the Coaxial DIGITAL AUDIO OUT socket for sound from the DVD recorder. Set the Analogue output or Digital output correctly, based on the equipment you connected to the DVD recorder. Read chapter System Menu - Setup for details.