Page 9

Works within existing and new networks Communicates effectively and economically with central station or PC running The Reporter IP software Compatible with DSCs DLS-2002 and System Administrator downloading software Generate status reports from any network PC Change access cards and PINS from network PC, at the panel or remotely via TCP/IP network or dial-up modem Generate status reports from any network PC Change access cards and PINS from network PC, at the panel or remotely via TCP/IP network or dial-up modem Fully supervised environment between central station receiver, T-Link module and panel Detects substitution and tamper attempts and network connection troubles, enabling administrator or central station to respond instantly Through the use of DSC's DLS or System Administrator software, site administrators can request information from the panel, change user information, generate status reports, gather daily maintenance details (schedules, arm/disarm information) from a personal computer via the TCP/IP network.

T-Link

LAN LAN

REPORTER

DLS SA

Power T-Link

The T-Link TCP/IP (Internet Protocol) transmitter works within an existing Intranet (LAN and WAN) to communicate alarm signals efficiently and economically to the DRL-IP central station receiver line card or to the Reporter IP monitoring software. Constant connection to the monitoring station provides for a fully supervised link between the module and the panel. Any indication of tampering or network connection trouble is detected by the module, which allows the administrator to respond to the situation instantly.
Input Voltage: Current: Physical Dimensions: Operting Temeprature: Output Protocols: Input Protocols: Connectors: 12VDC 150mA12VDC 8.3cm x 13.3cm 0to 65C TCP/IP PC-Link (SIA format) 4-pin header for PC-Link; RJ-45 for Ethernet Inputs and Outputs: 1 programmable output and 1 tamper input Network: Ethernet LAN/WAN 10BaseT or 10/100 BaseT Call Direction Options: Primary or backup communicator Downloading Support: DLS-3 or System Administrator Software Programming: Panel Keypad Multiple Central Stations: Primary and backup via phone line Approvals: FCC/IC and CE (UL and ULC penidng) Substitution Detection: Monitoring of unique MAC address
808.012.580 808.012.582 T-LINK Kit T-Link Starters Kit, complete with T Link Module, Reporter Software, DLS3 and DLS3A Software T-LINK T-Link Module

Page 10

Chapter 1- System and Control Equipment Aritech CD Advisor

Outputs Programmable outputs Main panel Remote keypad (CD 3048/3049) Remote line expander Printer output Dimensions (W x H x D mm) Main panel Remote keypad Remote line expander Weight Colour
220/240Vac 220/240Vac 18Vac/40VA 18Vac/14VA 13.8Vdc/1A 13.6Vdc/800mA Up to 12V-16Ah Up to 12V-16Ah Lead acid Lead acid Max. 24 zones Max. 10 zones 8 alarm zones 6 alarm zones 4 alarm zones 4 alarm zones 8 zones N/A 1 tamper zone 1 fail-to-communicate input (Zones have end of line resistor 4K%) 1 external bell; high current 800-1000mA 1 internal bell; high current 800-1000mA 5; 100mA 1; 40mA 2; 40mA Serial RS 232 Format 4; 100mA 1; 40mA N/A No 315x385x88mm; 1.2mm mild steel N/A 4.1kg Beige
8; 100mA 1; 40mA 2; 40mA Serial RS 232 Format 475x460x160mm; 1.25mm mild steel
315x385x88; 1.2mm mild steel 160 x 120 x 35; 3 mm ABS 175 x 125 x 35mm; 3 mm polycarbonate 10.5kg 5.3kg Beige Beige

Page 12

4 Inputs and 2 Outputs LCD Display 2 lines with 16 characters Backlight
Remote LCD keypad for CD Control panel family
The keypad have a clearly readable text on a 16 characters LCD for displaying system programming and alarm. They can be mounted at a distance of 800m from an Advisor panel. The Arming Station LCD shows details of alarms or a pre-programmed text. To navigate through the programming and operational features, even in places where lightning is poor, the backlit screen and keys highlight the keypad for day and night use. The backlit functionality is programmable. In non-alarm situation the keypad can show a free programmable text.
CD 3049 CD300819 Auxiliary Power: 13.7 VDC/1.8A Programmable output: 40 mA Inputs: Dimensions: (HxWxD) 60 x 120 x 35mm: 3mm ABS Colour: Beige
R100517 R100517N 808.010.200 808.011.016 R100542 808.011.026 808.011.027 R100580 808.010.201 CD3008 LCD remote keypad (no zones), NL/FR/GE label, ADT logo CD3008 S33 LCD remote keypad (no zones), French label, French approval CD3008-PROX LCD remote keypad + proximity (incl. 2 x CD Prox-Keys), NL/FR/GE label, ADT logo CD3009 LCD remote keypad (no zones), Dutch label CD3009 S33 LCD remote keypad (no zones), French label, French approval CD3048 LCD remote keypad with 4 zones/2 outputs, NL/FR/GE label, ADT logo CD3049 LCD remote keypad with 4 zones/2 outputs, German label CD3049 S33 LCD remote keypad with 4 zones/2 outputs, French label, French approval CDPROX-KEY Proximity keyfob for use with CD 3008-Prox

Page 13

Interface Devices Product Codes
Product Code 501.168 Product Name CD9005 Description Plug-on output expander (8 outputs)
501.166 501.175 501.169 808.011.024 501.184 R100546
CD9006 CD9007 CD9010 CD9020 CD9031 CD9031S33

Supply voltage: (Volts DC) Current consumption: (mA) Open collector output: "Request to exit" input: Max. distance from panel: Max. number per panel bus: Specified cable: Data bus monitoring: Addressing: IP grade: Dimensions in mm: (W x H x D) Operating Temperature: Colour:
(*) IP67 when mounted to suitable enclosure
ATS1100/05 ATS1150 10,5 - 13,max. 70 max. 1 (50 mA max.) 1 (50 mA max.) Yes Yes 1,5km 1,5km Aritech WCAT 52/54 or equivalent Continuously monitored for offline condition of all devices on the data bus Dip switches Dip switches IP30 IP67* 126 x 168 x x 116 x to +50C 0 to +50C Beige Metallic
808.011.100 808.011.101 808.011.102 808.011.174 808.011.126 808.011.177 ATS1100 Keypad, 2x16 characters LCD ATS1105 Keypad, 2x16 characters LCD, with reader interface ATSLED heavy duty keypad (supplied in kit) ATSDK1101 Language kit for ATS1100/05 Dutch ATSDK1102 Language kit for ATS1100/05 French ATSDK1106 Language kit for ATS1100/05 Swedish 808.011.176 808.011.175 808.011.196 808.011.200 ATSDK1107 Language kit for ATS1100/05 Danish ATSDK1110 Language kit for ATS1100/05 Italian ATSDK1109 Language kit for ATS 1100/05 Spanish ATSDK 1104 Language kit for ATS1100/05 German

Page 17

Innovative proximity readers Cards programmable by installers and/or users at their site(s) High security 4-byte security code & read/write encryption pay per use application High quality cards & key fobs
Smart Card Proximity Readers
The ATS1190 and 1192 connect directly on the Advisor MASTER RS485 data bus. They may also be configured to operate in stand-alone and control devices like office equipment or vending machines, this function enables credits to be assigned on user cards and deducted by the readers, purely on a usage basis. Both readers have a read range of 6 to 8 cm and feature a unique optical pry-off tamper sensor, a programmable OC output, an RTE input and a beeper. The red & blue LED's can be mapped to represent different functions e.g. nightlight, lock status or alarm area status. The readers can be configured and addressed via a LCD keypad connected on the control panel bus. Some security options (Site code & 4-byte security code) are only programmable via TITAN Management Software and configuration cards.
Supply voltage (Volts DC): Current consumption (mA): Open collector output: "Request to exit" input: Max. distance from panel: Max. number per panel bus: Specified cable: Data bus monitoring: Addressing: IP grade: Dimensions in mm (W x H x D): Operating temperature: Colour: Programmable OC outputs: Connectivity: Read range (cm): Optical pry-off tamper sensor: Epoxy-filled weatherproof construction: Red & Blue LED's: ATS1192 10,5 - 13,8V 25 in standby / 80 during card read 1 (25 mA max.) 1 (25 mA max.) Yes Yes 1,5 km 1,5km Aritech WCAT 52/54 or equivalent Continuously monitored for offline condition of all devices on the data bus Via keypad, TITAN or config. Card IP54 IPx 110 x x 149 x to +50C 0 to +50C 5 colors Dark grey pulse from 1 msec to 2.5 secs time from 1 sec to 193 days latch RS485 databus device or standard Wiegand for connection on the 4 reader inputs of the ATS1250 6-8 6-8 Yes Yes Yes Yes Configurable as nightlight, lock status or alarm area status ATS1190

808.011.104 808.011.113 808.011.127 808.011.130 808.011.204 808.011.208 808.011.132 ATS1190 ATS Smart cards reader (supplied with 2,5 m of cable) ATS1660 ATS1190 snap-on cover white (10 pieces) ATS1192 Heavy duty ATS Smart cards reader (supplied with 2,5 m of cable) ATS1471 ATS Smart tag (keyfob) ATS1476 ATS Smart card with programmable magnetic stripe (Pack of 10) AT1477 ATS Smart tag (keyfob) (Pack of 10) ATS1480 Default card for Smart cards programmer 808.011.141 808.011.142 808.011.143 808.011.144 808.011.178 808.011.182 808.011.183 ATS1661 ATS1190 snap-on cover red (10 pieces) ATS1662 ATS1190 snap-on cover grey (10 pieces) ATS1663 ATS1190 snap-on cover beige (10 pieces) ATS1664 ATS1190 snap-on cover black (10 pieces) ATS1475 ATS Smart card (pack of 10) IDP67 Card holder with beltclip IDS940M Self-retracting reel for IDP67

Page 18

Expanders from 4 up to 32 inputs 8 OC outputs on board Expandable to 16 OC outputs or 16 relays with optional cards Extra siren output Switched mode power supply Different types of enclosure

Data Interfaces

Data Gathering Panels (DGP) are used to expand the number of alarm inputs on the system and allow inputs and relays to be connected at a location remote from the Advisor MASTER panel. DGP's communicate via poll & reply messages and send alarms to the control panel for processing. Standard with the ATS1201 is 8 inputs, 8 Open Collectors (OC) outputs and a siren driver, however this is expandable to a total of 32 inputs and 16 outputs.
Power supply: Current consumption: (mA) Inputs: Siren output: OC outputs on board: Max. number of outputs: Dynamic battery testing: Max. distance from panel: Max. number per panel: Specified cable: Data bus monitoring: Addressing: PCB dimensions in mm: Enclosure dimensions in mm: (W x H x D) Mains transformer: Operating temperature: ATS1201 ATS1202 ATS1210/11 ATS1220 13,8 VDC / 2 APowered buy the panel bus (10,5 - 13,8 Volts DC) 8-1 No No No Yes not applicable not applicable not applicable 1,5km 1,5km 1,5km 1,5km per ATS15 Aritech WCAT 52/54 or equivalent Yes Not a bus device Yes Yes Individually addressed by dipswitches 175 x x x x x 445 x 85 No enclosure ATS1211:166 x 126 x x 87 x 34 ATS1210:124 x 87 x 34 not applicable not applicable 0 to +50C 0 to +50C
230 V 50Hz/23 VAC 56 VA not applicable 0 to +50C 0 to +50C
808.011.105 808.011.152 808.011.106 808.011.107 808.011.128 ATS- 32 zone DGP with power supply and siren driver (ATS1640 housing included) ATS1201MBC ATS1201 Mother Board Card ATS1202 Plug-in 8 zone expander for ATS1201 or ATS40xx and ATS33xx ATSzone expander with output connector (ATS1644 plastic housing included) ATSzone expander with output connector (ATS1643 steel housing included) 808.011.129 808.011.145 808.011.120 808.011.121 808.011.134 ATSzone expander with output connector (ATS1644 plastic housing included) ATS1810 4-way relay card ATS1811 8-way clocked relay card ATS1820 16-way clocked open collector card ATS1631 Connector lead to connect ATS1810, ATS1811 and ATS1820 to the control panel (300mm)

The Atlas dual technology sensor integrate passive infrared and microwave technologies for rock-solid and durable performance that you have come to rely on even in the most difficult environments. With the double reliability factor of both temperature change and motion detection - and the added benefit of smart software algorithms for the signal processing of human motion - the sensor provides superior false alarm immunity, great catch detection, and years of reliable opreration (with no signal degradation) level and for all installation types.
Operating Voltage: Current Consumption: Alarm Duration: Pulse Count: Sensor: RFI Immunity: Alarm Output: Tamper Switch: Dimensions: 9-16Vdc 22mA@12V (standby) 34mA@16V (alarm) 1sec. min. 1 0r 2 Dual Element 30V/m up to 1GHz 60V/m up to 1GHz Normally closed Normally closed 113 x 70 x 55mm
R104077 ATLAS Dual Technology Detector PIR/Micorwave, wide angle (90 12mx12m,listen-in microphone)

Page 26

Coverage 12m x 12m Look-down lens Microcontroller based signal processing DRO patch antenna PIR sized dual technology Microwave sensitivity adjustment trimmer Selective flourescent light interference filter (50/60Hz) Microphone for listen-in applications

Micro-X

The Micro-X dual technology sensor integrate passive infrared and microwave technologies for rock-solid and durable performance that you have come to rely on even in the most difficult environments. With the double reliability factor of both temperature change and motion detection - and the added benefit of smart software algorithms for the signal processing of human motion - the sensor provides superior false alarm immunity, great catch detection, and years of reliable operation (with no signal degradation) level and for all installation types.
Supply Voltage: Current Consumption: Alarm Duration: Pulse Count: Sensor: RFI Immunity: Alarm Output: Tamper Switch: Dimensions: 9-16Vdc 26mA@12V (standby) 1sec. min. 1 0r 2 Dual Element 30V/m up to 1GHz Normally closed Normally closed 105 x 65 x 50mm
816.007.023 MICRO-X Micro-X Dual Technology Motion Sensor PIR/Microwave, 12mx12m, memory function, Belgian approval

Page 27

Chapter 2 - Volumetric Protection Motion Detectors Passive Infrared
Passive infra-red detectors recognise the difference in temperature between a warm bodied object and its background. When the warm body moves, the PIR triggers an alarm.

Multi-level PIR Signal processing Single/dual element low noise sensor High level static and transient protection Exceptional white light immunity Temperature compensation LED on/off jumper Vertical adjustment Super quiet operation Wall, corner or ceiling mounting Attractive styling for any decor
The Bravo series motion detectors take advantage of microprocessor-based multi-level signal processing software and specially designed lenses to deliver superior intruder detection and reliable long-term operation while minimising false alarms. The Bravo series takes motion detectors to a new level of detection sensitivity, stability and false alarm immunity in residential, commercial and industrial settings. Bravo2 The Bravo2 Standard-Range PIR detector is ideal for residential security systems and all normal office & commercial installations. The Bravo3 Long-Range PIR detector can be used for all residential, commercial and industrial applications requiring longer range sensing without compromising accuracy. Bravo3 The Digital Bravo3 PIR detector elevates the detection capabilities and false alarm prevention features of the DSC line of PIR detectors to a new level of reliability with the most advanced technology in motion detection. digital technology! With exceptional catch performance at elevated temperatures and augmented false alarm immunity, Digital Bravo3 detectors have all the best features and the superior intelligence necessary to provide enhanced security. Bravo5 A 360 ceiling-mount quad element PIR motion detector with optional integral glass break detector, Bravo5 is ideal for rooms requiring a uniform 360 detection pattern or for rooms requiring the benefit of having both motion and glass break detectors in one housing. Bravo6 The Bravo6 detector utilizes 2 dual element PIRs featuring High Density Digital Analysis and multi-level signal processing with a vertically interleaving beam pattern for superior intruder detection while being immune to pets weighing up to 38kg.
816.013.026 816.013.027 816.013.028 816.013.029 816.013.030 816.013.031 816.013.032 Bravo2 Passive Infra Red Detector, wide angle (90) 12mx12m, NC relay Bravo3 Bravo 3 Long Range PIR Detector(15.2mx18.3m) Bravo3D Passive Infra Red Detector, wide angle (90) 15.2mx18.3m, NC relay Bravo3DP Passive Infra Red Detector, wide angle (90) 15.2mx18.3m, NC relay, Pet Immunity Bravo5 Bravo 5 Ceiling Mount PIR Detector (9.2m at 3m height) Bravo5GB Bravo 5GB Ceiling Mount PIR Detector (9.2m at 3m height) with Integrated Glass Break Detector Bravo6 Dual Element Passive Infra Red Detector, (90) 12.2mx15.2m, Pet Immunity 816.013.033 816.013.034 BV-L2 Corridor Lens for Bravo2 (21.3mx1.8m) and Bravo3(D) (36.6mx3.2m) BV-L3 Curtain Lens forBravo(12.2mx1.1m) and Bravo3(D) (15.2mx1.3m)

Multi-level PIR signal processing** Digital Microwave signal processing DRO microwave technology for low current and reliable operation High RF immunity with SMD construction Exception white light immunity Microcontroller low voltage reset circuit Tamper switch Digital temperature compensation Adjustable microwave detection pattern to match room size

Force 2

FORCE 2 motion detectors are Dual Detectors employing both Microwave (MW) and Passive Infrared (PIR) motion sensors. The sensors are combined through a microprocessor to provide "intelligent" motion detection designed to eliminate "single detector" false alarms. Significant new technical features such as Multi-Level PIR signal processing, digital temperature compensation, a high reliability DRO microwave sensor, and digital MW signal analysis combine for a new level of detection sensitivity, stability, and false alarm immunity. The PIR and MW systems are each designed as independent, high quality motion detectors. When combined, the result is a detector with unmatched performance.
Operating voltage: Ripple tolerance: Stand-by current: Alarm current: Tamper contact ratings: Alarm contact series resistance: Operation: Alarm duration: Walk speed : Nominal mounting height: Jumper: Immunity: RF immunity: Transients at terminals: Static discharge immunity: White light: Operating temperature Humidity: 9.5 to 14.5Vdc 3Vp-p at 12Vdc 30mA at 12Vdc 30mA at 12Vdc 100mA at 24 Vdc 101/2 0.25W
816.007.032 F2-201 Force 2 Regular Range Dual Technology Detector (12.2m x 12.2m)
2 seconds 0.15 to 3.0m/s) 2.3m Alarm LED on/off
30V/m over range 0.01 to 1200MHz 2.4kV at 1.2 joules 25kV 20,000 Lux at the detector 0 to 50C 5% to 95% RH non-condensing

Page 38

Extremely low microwave power with optional day disable Excellent RFI and white light rejection 12 m coverage - 7 curtains Precision sealed Gliding Focus Curtain mirrors Unique Twin Opposed Antenna Custom dual technology ASIC PIR: Uses the latest generation 4D signal processing Microwave: Advanced proprietary DoM signal processing
The DD 400 Series is a powerfull range of commercial dual technology detectors, with variants stretching from 12m up to 20m volumetric coverage. Packed with the usual Aritech features such as Gliding Focus Curtains, range control, sealed optics, 4D processing, etc., the DD 400 provides a quick solution to previously problem environments.
Supply voltage: Current consumption: Normal operation: In alarm, LED on: Outputs: Alarm: Tamper: Alarm time: Mounting height: Target speed: Microwave frequency: Microwave power: Coverage: DD450: 9 - 15 VDC Max. ripple 2 V peak-to-peak at 12 VDC 14.5 mA 22 mA NC contact, rated 80 mA at 28 VDC NC contact, rated 100 mA at 28 VDC Min. 2.5 sec 1.8 to 3.0 m Min. 0.2 - max. 3.0 m/sec 2450 MHz 0.005 W/cm2 at 1.0 m 7 curtains of 12 metres. Range can be reduced to 7 or 5 metres. Pattern may be adapted using mirror masks. 3 curtains of 16 metres. Range can be reduced to 10 or 7metres. Pattern may be adapted using mirror masks. 7 curtains of 20 metres. Range can be reduced to 12 or 7 metres. Pattern may be adapted using mirror masks. -10 to +50C; Max. 95% humidity. 86

816.007.042

816.007.040

816.007.043

Ambient conditions: Field of view: IP/IK rating (with sealed cable entry): IP30, IK02 Dimensions: 140 x 76 x 68 mm

Page 40

A complete new case styling which fits into a variety of building styles and blends with any room decor K-band microwave technology to deliver sharp detection without holes or weak spots Uniform sensitivity optics giving the sensors consistent coverage throughout the protected area Zero clearance black bug guard

DT-7000 Series

All DT-7000 EU sensors are provided with: A complete new case styling which fits into a variety of building styles and blends with any room decor. K-band microwave technology to deliver sharp detection without holes or weak spots. Uniform sensitivity optics giving the sensors consistent coverage throughout the protected area. Zero clearance black bug guard. The K-band Advantage K-band microwave technology delivers sharp detection and superior false alarm immunity through pattern shaping and pattern containment. Pattern shaping fills the protected area with a broad, balloon-shaped pattern, which matches the PIR pattern. Because K-band is a higher frequency, the amount of microwave energy that penetrates walls is reduced, containing the pattern within the coverage area and reducing false alarms. Uniform Sensitivity Optics The custom-designed fresnel lens provides the same sensitivity for human targets at the edge of the pattern as exists directly in front of the sensor, giving the DT-7000 EU motion sensors consistent coverage throughout the protected area. Zero Clearance Black bug Guard The new DUAL TEC sensors offer more than the standard features that protect against false alarm due to RF signals, electrostatic discharge, and electrical overstress. The patented black bug guard improves white light immunity and the patented adaptive microwave threshold circuit automatically adjusts for room disturbances.
DT-7235EU Dimensions: Power Requirements: AC Ripple: Alarm Relay: Trouble Relay: Tamper Switch: Microwave Frequencies: PIR White Light Immunity: RFI Immunity: Fluorescent Light Filter: Operating Temperature: Sensitivity: Self-test Intervals: DT-7435EU DT-7450EU DT-7550CEU 119 mm x 71 mm x 42 mm (h x w x d). 7.5 - 16 VDC 25 mA typical, 30 mA maximum, 12 VDC 30 mA typ., 40 mA max. at 12 VDC. 3 V peak-to-peak at 12 VDC nominal. Energised Form A Energised Form C 500 mA, 30 VDC. 125 mA, 25 VDC, 20 Ohm series resistor. De-energised Form B (NC) 125 mA, 25 VDC (NC) 50 mA, 24 VDC. 24.125 GHz (K-band). 6.500 Lux typical. 30 V/m, 10 MHz -1000 MHz. 50 Hz. 50 Hz. 50 Hz. -10 ~ +55C; 5% - 95% relative humidity (non-condensing). 2-4 steps Standard: 2 - 4 steps Standard: 3 - 4 steps Standard: 3 - 4 steps. Harsh : 4 - 5 steps Harsh : 4 - 5 steps Intermediate:2-3 steps. Microwave Supervision : every 5 seconds PIR self-test : once every hour Temperature compensation: every 30 seconds 11 m x 11 m. 11 m x 11 m. 15 m x 18 m. 15 m x 18 m. (2 fields of view per PIR finger): Long range : 22 Intermediate : 12 Lower : 6 *Look-down : 4

R100682

Page 43
Now upgraded to 12 m and 7 curtains High performance PIR verified by a novel Distance of Motion technique 7 Autofocus curtains of detection formed by precision optics 3D signal processing True range control On-site selection of coverage pattern Walk test of each detection method plus verified alarms Remote enable/disable of walk test LED Alarm memory version

DD300Plus

The DD300Plus series are dual technology detectors based on a high quality PIR verified by a novel Distance of Motion measurement technique. The Precision PIR optics are based on Aritechs patented gliding focus curtain design which allows true range control to be obtained. The curtain optics provide uniform sensitivity along the field of view whereas the optics provides areas of high local sensitivity.
Supply voltage: 10 - 15 VDC; Max. ripple 2V peak-to-peak at 12 VDC Current consumption: Normal operation: 14 mA In alarm, LED on: 18 mA Outputs: Alarm: NC contact, rated 100 mA at 28 VDC Tamper: NC contact, rated 100 mA at 28 VDC Coverage: 12 m; adjustable to 5, 8 and 12 m Mounting height: 1.8 to 2.4 m Ambient conditions: -10 to +55C; Relative humidity max. 90% Dimensions: 124 x 72 x 56 mm
816.007.041 DD325P-F Dual technology detector PIR/Ultrason, wide angle 12m x 12m or 8m x 8m o 5m x 5m, NC relay - French Approval DD325S1-P Dual technology detector PIR/Ultrason, wide angle 12m x 12m or 8m x 8m or 5m x 5m, NC relay - Belgian Approval DD335P-D Dual technology detector PIR/Ultrason, wide angle 12m x 12m or 8m x 8m or 5m x 5m, NC relay - alarm memory - German approval

816.007.024

816.007.036

Page 44

Chapter 3 - Perimeter and Asset Protection Perimeter and Asset Protection
While movement detectors detect the movement of the body in a room the following detector will monitor the entry through a protected perimeter.am will gererate an alarm output.
Photoelectric Beam Detectors
Active Infra-red beams are ideal for protecting large voids such as roof areas with sklights. All units operate on a transmit and receive principle. Breaking of the active Infra-Red beam will generate an alarm output.
Quick optical alignment Twin Synchronised Pulsed Beams Designed for Greater Stability Selectable 4-Channel Beam Frequencies Adjustable Beam Interruption Period

Optex AX-100/200

The OPTEX AX-100/200 Photoelectric Detector Series is the next step in Outdoor Detection and will satisfy all the needs of both users and installers. OPTEX unique technology and design provide a wide range of functions that greatly simplify installation and maintain reliable performance even in many adverse weather or environmental conditions. "And Gate" dual beams require simultaneous interruption of both beams to trigger an activation. No activation is generated when a bird or falling leaves break just one beam. The A.G.C. Circuit continually monitors for gradual changes in the signal's strength caused by changing weather conditions. It adjusts the sensitivity accordingly to maintain the proper signal level for the current environmental conditions.

816.001.002 AX-350MKII Optex Photoelectric Beam Sensor - Synchronised Twin Beam, 4-channel frequencies, Outdoor Use 100m, Indoor Use 200m 816.001.003 AX-650MKII Optex Photoelectric Beam Sensor - Synchronised Twin Beam, 4-channel frequencies, Outdoor Use 200m, Indoor Use 400m

Page 47

Synchronised twin beams Rotary optical system Easy beam alignment Automatic Gain Control circuit loaded
Pulnix Intelligent Twin Series
The Pulnix Twin Photo beam is designed to meet the highest quality and reliability standards in photoelectric beam intrusion detection. Unique twin beams are synchronised in order to reinforce the range and stability in severe weather conditions. The system has a rotary optical system for easy installation and a special lens design for accurate alignment. Pole mounted kit included with PB60.

PB100TK

Detection System: Infred Beam:

PB-20TE

PB-60TE

PB-30TK

PB-60TK
Protection Distance: Max. Beam Range: Reponse Time: Supply Voltage: Current Consumption: Alarm Output: Tamper Output: Alarm LED: Attenuation LED: Frequency Changeover: Ambient Temperature Range: Mounting Positions: Wiring: Weight: Appearance:
Simultaneous breaking of 2 beams LED pulsed beam, Double modulation Outdoor 20m or less Outdoor 100 or less Outdoor 40m or less less Indoor 120m Outdoor 30m or less Outdoor 60m or less Indoor 200m or less Indoor 40m or less or less Indoor 60m or less Indoor 120m or less Outdoor and Indoor Outdoor and Indoor Outdoor and Indoor Outdoor and Indoor Outdoor and Indoor 1000m 200m 600m 300m 600m 50m sec. to 700msec. (Variable at pot) 12V to 30 VDC (Non-polarity) 80mA or less 55mA or less 80mA or less 60mA or less 80mA or less Dry contact relay output form C Contact action: Interruption time + delay time (1 to 3 sec.) Contact capacity: 30V (AC/DC) 0.5A or less Dry contact relay (N/C) Action: Activated when cover is detached Contact capacity: 30V AC/DC, 0.5A or less Red LED (Receiver)ON: when an alarm is initiated Red LED (Receiver)ON: when an alarm is attenuated No Yes(4Ch) Yes(4ch) No No

-25C to +60C Indoor/Outdoor Terminals Transmitter 380g/Receiver 400g Wine red (PC resin)
816.017.006 816.017.015 PB-100TK Photoelectric Beam Sensor Twin Beam, Single Frequency, Outdoor Use 100m, Indoor Use 200m PB-20TE Photoelectric Beam Sensor Intelligent Twin Series, 4 Selectable Frequencies, Outdoor Use 20m, Indoor Use 40m PB-30TK Photoelectric Beam Sensor - Twin Beam, Single Frequency, Outdoor Use 30m, Indoor Use 60m PB-60TE Photoelectic Beam Sensor Intelligent Twin Series, 4 Selectable Frequencies, Outdoor Use 60m, Indoor Use 120m PB-60TK Photoelectic Beam Sensor Twin Beam, Single Frequency, Outdoor Use 60m, Indoor Use 120m

816.017.007 816.017.008

816.017.012

Page 48

4 Synchronised high power infrared (patented) Four frequencies selections Beam transmission strength selection Auto-gain lock
Pulnix Intelligent Quad Series
The PB50, PB100 and PB200 are acive beam detectors suitable for internal or external applications. The range of the units are 50m, 100m and 200m respectively when used externally. Each transmitter has 4 lenses sending active infra-red to 4 lenses art the receiver, thus providing 16 beams in total. In order to gerenate an alarm more than 90% must be crossed at one time. Fitted correctly, birds and small mammals such as badgers, foxes, rabbits, etc. do not give an alrm. Even falling leaves and flying debris do not affect the beams as long as less than 90% of the beams are broken at any one time. With the exception of the PB50F, all units have selectable frequencies and can therefore be stacked to provide larger coverage areas.

PB-IN-50HF

Detection System: Infrared Beam: Protection Distance: Max. arrival Distance: Response Time: Supply Voltage:

PF-IN-100HF

PB-IN-200HF

Current Consumption:

Alarm Output:

Environmental Output:

Tamper Output: Alarm LED: Sensitivity Attenuation LED: Beam Adjustment: Ambient Temperature Range: Mounting Position: Wiring: Weight: Appearance:
Near infrared beam interruption system (TR-RE, 4 beams simultaneous inerruption) Double modulation pulsed beam by LED Outdoor 50m or less Outdoor 100m or less Outdoor 200m or less Tenfold 500m Tenfold 1000m Tenfold 2000m 50msec. to 700msec. variable (Standard: 50msec.) 12V to 30V DC (non-polarity) 60mA or less at 70mA or less at 85mA or less at protection protection protection (Max. 95mA or less) (Max. 105mA or less) (Max. 120mA or less) Dry contact relay output 1c Reset: Interruption time + off - delay (approx. 1.5sec.) Contact capacity: 30V AC/DC, 1A or less Dry contact relay: 1a or 1b (switchover) Contact operation: Output when weather condition gets worse Contact capacity: 30V AC/DC, 1 A or less Dry contact relay: 1b Contact operation: Output when receiver cover is detached Contact capacity: 30V AC/DC, 0.1 A or less Red LED (receiver) lights when alarm is initiated Red LED (receiver) lights when beam reception is atttenuated Horizontal: 90, Vertical: 10 -25C to 60C Outdoor Terminals Transmitter 1200g/Reciever 1300g PC resin (wine red)

Input power: Current consumption: Alarm output: Alarm indication: Sensitivity adjustment: Test output: Range: Sabotage protection: Low voltage alarm: 9-15 V dc, 2 V max ripple p.p. Nominal 8,6 mA NC relay, max series resistance 35 Ohm LED-indication screw no steps of approx.6 dB each Screw no 4 for measuring the ambient noise level 1 to 4 m radius. See inst. manual for planning purposes Temperature 84C, drill shield, opening contact, pry-off contact 7,5 V
816.006.005 816.006.009 816.006.014 816.006.008 816.006.010 816.006.015 816.006.011 816.006.012 816.006.013 816.006.016 816.006.017 816.006.018 816.006.019 816.006.007 816.006.020 816.006.021 816.006.006 VV600-PLUS Seismic detector for vault and safe VV600PS1 Seismic detector for vault and safe, Belgian approval VV600S3Plus Seismic detector for vault and safe, French approval VV602-PLUSSeismic detector for ATM and night deposit safe VV602PS1Seismic detector for ATM and night deposit safe, Belgian approval VV602S3PLUS Seismic detector for ATM and night deposit safe, French approval VV620-PLUS Seismic detector for vault and safe, CO relay VV622-PLUS Seismic detector for ATM and night deposit safe, CO relay VM600P Mounting plate VM600PS10 Mounting plate VM602P Recess mounting box, wall VM604P Welding Plate VM606P Cable insert, round, 10 pcs VM651P Movable Mounting Plate Day/Night VM654P Armoured cable kit VM655P Metal junction box VT705P Test transmitter for Seismic Detector

Page 53

Chapter 3 - Perimeter and Asset Protection Magnetic Contacts
Contacts offer a simple means of protecting doors, windows and roller shutters. Tyco Safety Products stock a wide variety of contact to suit most applications.
Surface Mounting with Wire Technical Specification and Product Codes
Stock 805.003.019 Product Codes DC101S1 Opening 15mm Contact Gap NO Cable Type 2 metre Housing white plastic Dimensions 50 x 9 x 9mm Remark INCERT

R100337

15-31mm

2 metre

white plastic

50 x 9 x 9mm

INCERT High Security

510.165

EMK46AT

6 metre

54 x 13 x 12.5mm

VdS Class B

510.153

510.169

Dimensions: (H x W x D mm): Operating Temp: Action: Magnet: Colour: Finish: Indication: 81 x 63.5 x 29 -40C to + 50C Silent Action, latching (latching key release) Ferrite Black Stainless Steel Flag indication
1046 Hand operated stainless steel finish personal attack button, double push

Page 56

Chapter 4 - Miscellaneous Protection Devices
Wireless hold-up alarm Compatible with all Systems Easy to program

Vidue Wireless

The super heterodyne receiver always guarantees a correct functioning in disturbed environments; its good sensitivity and high selectivity make it immune to most disturbances around the frequency reception area. The new self-learning programming system enables the memorisation of the transmitters. It is possible to store up to 240 (RX1, RX2, RX4) different codes with self-learning mode. Three different functions can be programmed by means of SW1 key for the outputs: monostabel, bistable and timer. Self-learning of transmitters is managed by radio. It is possible to enable or disable the ROLLING CODE mode.
Nominal Frequency: Power supply: Relay contact: Working temperature range: Consumption: Sensibility: Antenna irradiation: Size: Weight: 433.92Mhz 12VAC-VDC J6 closed 24 VAC- VDC J6 open 1A/30VDC -20- +60C 15 mA standby - 103 dBm (S/N=17dB,m+100%) -66 dBM 132 x 30 x 67 105g
814.001.007 814.001.008 R104096 RX1 Radio reciever for Panic Button R104096 RX1NC Radio receiver with NC contact for Panic button R104096 TLC1 Radio Transmitter

Page 57

Chapter 4 - Miscellaneous Protection Devices Non Intrusion Sensors
Fire and water are potential threats to the safety of a person. With this range of products you can add additional security to every customer.
Detects most carbon based types of fires Provides very early warning for slow smouldering fires Ideal for sleeping risks such as residential homes High resistance to false alarms Tolerant to various detector mounting positions Negligible sensitivity to air speed Compatible with most existing residential burglar alarm systems Low profile, discreet and unobtrusive Environmentally friendly CE marked