Advanced Virtual DJ configuration Using ASIO4ALL and Timecoded vinyls
This document will explain how to configure Virtual DJ to use the TimeCoded Vinyls and an external mixtable. The goal is to play the 2 main outputs on the Maya USB soundcard, and the samples on another soundcard.

1. Requirements

The minimum requirements are: - External mixer with at least 3 channels - Maya44 USB soundcard - Additional sound card (laptop integrated soundcard or any PCI/USB soundcard) - 2 turntables - 2 TimeCoded Vinyls

2. Plug connexion

This is the standard configuration for TimeCoded Vinyls use. But we also plug to the mixer another soundcard.

3. ASIO4ALL

To use TimeCoded Vinyls, Virtual DJ must use the ASIO mode. But in this mode youll only see the Maya soundcard, because your PCI/integrated soundcard is not an ASIO soundcard. So we need an ASIO emulator. Just go to http://www.asio4all.com/ and download ASIO4ALL. After installing ASIO4ALL, launch it, you should see a screen like that:
Click on the Advanced button, and then enabled: - OUT and IN on the Maya sound card - OUT only on the other soundcard (in this example, Creative SB Live!) If you have more soundcards in your computer, be sure theyre not enabled in ASIO4ALL.
4. Virtual DJ configuration
Launch Virtual DJ, and go to the soundcard setting. Select Low latency TimeCoded Vinyls mode, and then select the ASIO4ALL v2 soundcard, like that:
Then click on the Timecode config button:
Check that the soundcard is ASIO4ALL v2. In the Input field, select Chan 1&2 : Left / Chan 3&4 : Right. Than means well use the 4 IN channels (2 x stereo) of the virtual soundcard (that belong to the IN channels of the Maya). In the Output field, select Chan 1&2 : Samples / Chan 3&4 : Left / Chan 5&6 : Right. That means well use the 1st 2 OUT channels of the virtual soundcard (that belong to the OUT channels of the SB Live!) for the samples, and the 4 other OUT channels (that belong to the OUT channels of the Maya) for the main outputs. Then click OK (or configure the TimeCoded Vinyls if you want). This should work if your additional soundcard is a 2 channels only soundcard. If you dont hear any sound, or if channels are not correctly assigned, please read the following step.
5. Advanced channels assignment (experts only)
In our example, the SB Live! Sound card has 6 channels:
Channels 0 & 1 are not used, channels 2 & 3 belong to the main output, and channels 4 & 5 belong to the surround output. We only want to use the main output, so well use only channels 2 & 3. The Maya USB sound card has 4 channels:
Well use all the channels of this card (6, 7, 8, 9). So well use the following virtual channels (of ASIO4ALL): 2, 3, 6, 7, 8, 9 This cant be set in the configuration panel of Virtual DJ. To do that, please close Virtual DJ. Then launch Regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\VirtualDJ, and edit the TimecodeConfigMapChanOut key:
Then assign the correct channels and click on the OK button. You should see the following screen:
Close regedit, and launch Virtual DJ. Do not change anything in the sound configuration, just play! If you dont see all the channels of your Maya, you must uninstall the drivers from Audiotrak, and use the standard drivers from Microsoft.

Copyrights

Atomix Productions http://www.atomixproductions.com contact@atomixproductions.com Copyright 1997-2003 Atomix Productions All Rights Reserved Number IDDN.FR.001.040012.01.R.C.2000.000.31400.

Trademarks

The Logo is a registered trademark of Atomix Productions. Virtual DJ is a registered trademark of Atomix Productions. Reproduction of this manual, in full or partially, is not permitted without express written permission from Atomix Productions. Windows and DirectX are registered trademarks of Microsoft Corporation. Maya is a registred trademark of Audiotrak.

Special Thanks to:

Damien Schmit , Yannick Biet, Nicolas Lger, Gwnal Desprs and the whole user-team of the website.