PLEASE READ This manual is provided as a free service by Projector.com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners.
ABOUT PROJECTOR.COM Projector.com (http://www.projector.com) is your review and buying guide resource for DLP and LCD video projectors. Visit the site to read the latest projector news and reviews, read and comment on projector specifications, download user manuals and much more.

QUICK SET-UP

ENGLISH
The following steps will quickly lead you through set-up and adjustments for the projector connected to a single computer. For connection to a second computer, please consult the Making the Connections section. The sequence numbers refer to the drawing of the quick set-up.

SETTING UP

POWER OFF (1) Switch off all equipment before connecting. COMPUTER (2) Connect the computer to the COMPUTER 1 (or 2) connector using the computer cable. Use applicable computer and monitor adapters if needed. SOUND (3) Connect sound from the computer using a standard 3.5-mm stereo jack line cable (not supplied).

wn loa

VIDEO (5) Connect video. Use a SCART adapter if needed. MAINS (6) Connect the power cords to the various equipment. POWER ON (7) First switch on the projector, then the source equipment for correct recognition of the projector.
MOUSE (4) When your computer is attached to COMPUTER 1, connect the mouse cable to COMPUTER 1 MOUSE. Use an applicable mouse adapter at the computer end. When attached to COMPUTER 2, connect the USB cable to COMPUTER 2 USB MOUSE.

Pr oje

ZOOM , FOCUS AND POSITION Zoom the lens for desired image size, focus the lens for an optically sharp image and tilt the unit using the integral adjustable feet to position the image on screen.
RESET Press RESET to automatically adjust for position, width and stability. RESET is automatically invoked when a new source is connected. CONTRAST AND BRIGHTNESS Adjust CONTRAST and BRIGHTNESS as preferred.

ct o r.c

COMPUTER 1

AUDIO IN

COMPUTER 2

MONITOR

AUDIO OUT

USB MOUSE REMOTE

S-VIDEO

AUDIO IN VIDEO

1&5 6

fro de d

1&7

TABLE OF CONTENTS

INTRODUCTION... 5 SYMBOL DESCRIPTIONS... 6 SAFETY INSTRUCTIONS... 7 MAIN FEATURES... 11 SUPPLIED MATERIAL... 12 5.1 STANDARD MATERIAL.. 12 5.2 OPTIONAL MATERIAL... 12 MAKING THE CONNECTIONS.. 13 IMAGE ADJUSTMENTS... 16 USING THE PROJECTOR.. 18 8.1 REMOTE CONTROL.. 18 8.1.1 REMOTE CONTROL KEYS... 19 8.2 PROJECTOR KEYBOARD... 21 8.2.1 KEYBOARD KEYS.. 21 8.2.2 INDICATORS... 22 8.3 THE MENU SYSTEM... 23 8.3.1 THE BASIC AND COMMONLY USED FUNCTIONS... 24 8.3.2 THE FEATURES MENU SELECTIONS.. 24 THE ADVANCED SELECTIONS.. 25 CEILING MOUNTING... 27 9.1 SELECTING A MOUNT... 27 9.2 MOUNTING IN THE CEILING.. 28 9.3 WIRING.... 28 TROUBLE-SHOOTING.. 29 MAINTENANCE... 32 11.1 GENERAL... 32 11.2 LAMP REPLACEMENT... 32 11.3 THE REMOTE CONTROL.. 34 TECHNICAL DATA... 35 12.1 GENERAL ENVIRONMENTAL LIMITS.. 35 12.2 PROJECTOR UNIT... 36 12.3 POWER SUPPLY.. 36 12.4 REMOTE CONTROL.. 37 12.5 COMPATIBILITY... 37 12.6 PROJECTION DISTANCES... 38 CONNECTORS... 39 13.1 COMPUTER 1 & 2... 39 13.2 MONITOR... 39 13.3 COMPUTER 1 MOUSE... 40 13.4 AUDIO IN/AUDIO IN VIDEO/AUDIO OUT.. 40 13.5 COMPUTER 2 USB MOUSE.. 40 13.6 REMOTE... 40

7. WATER AND MOISTURE - The projector is designed for indoor use only and should not be used near water and moisture.
8. CARTS AND STANDS - Place the projector on a stable, hard surface in a manner that does not obstruct ventilation ports and openings in the projector housing. Unstable carts, stands, tables and other arrangements may cause the projector to fall, which may cause serious injury to people and/or damaging the projector and other material. 9. CEILING MOUNTING - When mounting the projector in the ceiling, always ensure that all screws, bolts and other fixing devices of the ceiling mount hardware are securely in place and tightened. Use only well dimensioned ceiling mounts from a renowned supplier. Connect the 7
1. READ INSTRUCTIONS - All safety and operating instructions should be read before the projector is operated.
projector to a switched mains power supply, and switch off when not in use, for maximum protection against fire. Switching off using the remote control only puts the projector in a standby (sleep) mode with live internal voltages.
11. HEAT - The projector should be situated away from heat sources such as sunlight, radiators stoves or other strong heat sources. Do not operate the projector outside the maximum temperature specifications. 12. OBJECT OR LIQUID ENTRY - Care should be taken that objects are not put or do not fall into the projector housing. Be careful not to spill liquids that may flow into the projector interior. Do not insert metal or flammable objects into the projector.
13. POWER SOURCES - The projector must only be connected to proper electrical voltage as marked on the projector body, on the label at the power inlet. The projector should be connected to the electrical outlet 8

Ventilation slots

10. VENTILATION - Slots and openings in the projector housing (see illustration below) are provided for ventilation. Air inlet filters are employed to reduce dust build-up internally. Periodically vacuum the filters (from the outside of the ventilation grilles) as needed. To ensure reliable operation of the projector and protection from overheating, do not block or cover slots or openings in any way. Do not insert any foreign objects or instruments into the slots and openings, as this may block the ventilation fans. Do not place the projector on a soft surface (carpet etc.). Never install the projector in an enclosed unit unless it is properly ventilated by a separate cooling system.

using a power cord compatible with the local electrical voltage. Never operate the projector outside the electrical voltage specification. If you are unsure about the type of electrical service at your location, please consult your dealer or local Power Company.
15. GROUNDING OR POLARIZATION - Precautions should be taken so that grounding or polarization of the projector is maintained. Do not use a three-prong to a two-prong adapter. 16. ELECTRICAL SHOCK - To reduce the risk of electrical shock, do not open the unit. Refer all servicing to authorized personnel only. 17. CLEANING - The projector should be cleaned only as recommended, see the Maintenance section. Disconnect the power cord from the power outlet before cleaning. Do not use liquid, spray or aerosol cleaners. 18. NON-USE PERIODS - The power cord of the projector should be unplugged from the outlet when left unused for a long period of time. 19. LAMP REPLACEMENT - Replace projection lamp with same type and rating as shown in the Technical Data section. Allow unit to cool down before replacement. 20. SERVICING - The user should not attempt to perform unusual or technical service to the projector. Do not open the unit, except for the lamp replacement door. Refer all servicing to authorized personnel only. Replace damaged cords or cables with original replacement parts only.
21. DAMAGE REQUIRING SERVICE - The projector should be serviced by authorized personnel when: Objects have fallen, or liquid spilled, into the projector The projector has been exposed to water or moisture The projector does not appear to operate normally (fan not working, noise, smell, smoke, heat etc.) The projector has been dropped or damaged
22. ABNORMALITY - If you detect any abnormal smell or smoke, immediately disconnect power plug. Disconnect the power plug from the inlet to prevent fire or electrical shock. 9
14. POWER CORD PROTECTION - Power cords should be routed so that they are not likely to be walked on, pinched or unduly bent by items placed upon or against them. Pay particular attention to cords and cables at the point where they exit from the projector.
23. LIFTING AND MOVING - Let the projector cool down before moving. Disconnect the power cord and all other cables. Carry the unit by the handle provided. The projector should preferably be transported in a suitable case.

4 MAIN FEATURES

The unit employs the following important features that in total provide you with a highly functional and powerful projector:
High brightness image Compact, light and portable Automatic adjustments/set-up User replaceable UHP-lamp
True XGA 1024 x 768 resolution 16.7 million colors
640 x 480 to 1280 x 1024 image compatibility Digital keystone correction Stereo sound
Comprehensive menu system On screen display (OSD) Low noise cooling system False light blocking Power down management
User and source settings memorized

Remote control with laser pointer and trackball mouse control

Digital magnification

5 SUPPLIED MATERIAL

5.1 STANDARD MATERIAL

A complete set includes the following components:

1. 2. 3. 4. 5. 6.

LCD Projector Computer cable A/V Cable Mouse Cable USB cable Mouse Adapter PS/2
The standard material is subject to change without prior notice

OPTIONAL MATERIAL

Optional cables, adapters and accessories are available. Consult your dealer for further information.

7. 8. 9. 10. 11. *

Mouse Adapter PC (Y-Split) Power Cord Remote Control Batteries User Guide
Soft Case (not shown in drawing)

6 MAKING THE CONNECTIONS

The projector may be connected to different equipment. The following sections describe in detail how to connect to these systems.
See the illustration on the rear of the quick set-up card on how the various system parts connect together.
Various cables are supplied or optionally available to connect to different sources. Follow the list below in numerical order for a trouble-free set-up! 1. SWITCH OFF all equipment before making all the connections.
2. COMPUTER CABLE. Connection to the projector is made through a basic computer cable and appropriate adapters. PC. Use the computer cable directly to connect to the graphics port. If needed, connect your monitor to the MONITOR connector on the projector. MAC. Connect the optional MAC adapter marked COMPUTER on the computer end to adapt to the graphics-port. The optional adapter marked MONITOR is connected to the monitor cable if needed.
Be aware of static electricity that may build up in the dry season and when operating on synthetic carpets. Discharge any static electricity by touching a metallic surface before you start.
SOUND. Connect sound using an optional 3.5 mm stereo jack cable.
MOUSE. You may control the mouse directly from the wireless remote control. COMPUTER 1 MOUSE is active when you use COMPUTER 1, and COMPUTER 2 USB MOUSE is active when you use COMPUTER 2.

COMPUTER 1 COMPUTER 2

AUDIO OUT MOUSE

Connector panel

PS/2. Use the PS/2 adapter that connects directly to your computer mouse port. Running the computer mouse in parallel is not possible, unless your computer itself has provision for two mice simultaneously. You may consider using the above serial adapter and run your mouse on the serial port instead, in order to be able to run your local mouse in parallel. This will require a different mouse driver setting. Please consult your computer documentation or local dealer for details. MAC. Use the optional MAC mouse adapter to connect to the mouse port on your MAC computer.
COMPUTER 2 USB MOUSE USB. Connect the USB cable directly to the USB port on the projector and the computer.
COMPUTER 1 MOUSE Connect the appropriate adapter to the free end of the mouse cable at the computer end as described below. SERIAL (RS 232). Use the serial adapter with a branch for the local computer mouse. The serial adapter is fitted with a 9-pin DSUB connector. Use an extra 9- to 25-pin adapter (available from your dealer) if your computer has a 25-pin serial connector. Connect your computer mouse to the free branch of the adapter if desired. With some computers, the branched adapter may not work. For this purpose, an optional straight serial adapter is available.

Zoom Focus

2. RESET in most cases automatically adjusts the image position, width (WIDTH) and stability (TUNE). If RESET fails to adjust the image

Adjustable feet

The following list aids in a trouble free set-up of the projector. Try using a patterned background (tiles, checkerboard pattern etc) when adjusting the image.
correctly, see WIDTH, POSITION and TUNE below. RESET is automatically activated when a new source is connected.
3. CONTRAST and BRIGHTNESS may be adjusted according to your personal taste, the image and the viewing conditions. The controls are directly accessible on the projector keyboard.
5. POSITION the image correctly by accessing ADVANCED, PICTURE, POSITION, then press SELECT and adjust position with the trackball or keyboard cursor controls
Set-up should be done once with the source(s) you are using most frequently. Allow some minutes for the unit to warm up before adjusting the settings. Most settings will be memorized individually for each source for future use.
6. TUNE the image for a stable projection. In the menu, select ADVANCED, PICTURE, TUNE and press SELECT. Adjust stability using the trackball.
4. WIDTH. The frequency controls the width of the image. A wrong frequency setting can be seen as equally spaced, vertical stripes or irregularities in the pattern displayed. Press the MENU key, ADVANCED, PICTURE, WIDTH and press SELECT. Adjust the value up or down using the trackball or keyboard cursor controls, observing that the amount of vertical stripes reduces, until the distortion is gone. You may still have an unstable image, please see the next section.

8 USING THE PROJECTOR

The projector has a set of features and functions you should familiarize with in order to get the most out of using the unit.

REMOTE CONTROL

The remote control may be pointed directly at the projector front or rear, where the receivers are situated, or indirectly by pointing at the projection screen. When pointing at the screen, point at an angle that reflects the beam towards the projector. The remote control can also be physically connected to the projector using an optional cable with standard 2.5 mm mini-jack connectors.
Left Key (Select) Trackball
The trackball is by default controlling the computer mouse (if the mouse cable is connected properly). With the function keys BLACK, MAGNIFY and MENU, the mouse control is disabled. In the menu system, the trackball is used for navigation between the different alternatives, and when a function is selected, the trackball is used for adjustment of that function.

PROJECTOR KEYBOARD

The keypad on the projector gives access to all controls, either directly or through the menu system.
POWER CONTRAST BRIGHT VOLUME MENU KEYSTONE SELECT HELP

SOURCE

KEYBOARD KEYS
Turns the projector on or into standby mode. Switches the projection lamp off, but leaves power on to the rest of the projector. Contrast is the ratio between light and dark colors.
CONTRAST BRIGHT VOLUME MENU SOURCE KEYSTONE/ CURSOR KEYS

SELECT

Volume of the audio output can be altered to suit local conditions. Invokes the menu system. Selects between COMPUTER 1, COMPUTER 2, S-VIDEO AND VIDEO as the active source. Adjusts the picture width in either the top or bottom part of the image (the Keystone effect = picture width is different at top and bottom due to tilted projector). When the MENU function is invoked, the cursor keys are used to navigate in the menu system. Emulates the left mouse key. Once the menu is accessed selection are confirmed using SELECT. Enters help-section in menu. Automatically adjusts the image correctly
Brightness (whiteness) of the image can be altered to suit local lighting conditions.

MEM MEM MEM

INDICATORS
NO LIGHT indicates that the unit power cord is disconnected.
GREEN indicates that the POWER key has been pressed and the fan is starting/that the unit is operational.
RED indicates lamp lifetime overdue.
RED FLASHING when the projector is overheated.
YELLOW FLASHING indicates that the unit is in startup mode or standby mode (switched off using the remote control or the keypad)

THE MENU SYSTEM

The menu system is designed to gain access to functions not often used, as opposed to frequently used features that are directly available through the remote control and the projector keypad. Press the MENU key to invoke or exit from the menu system. The MENU is also switched off after one minute of inactivity. Most settings are memorized (MEM).
When the menu is active, the trackball is used to navigate between options (and therefore is not available for mouse control etc. at the same time). The SELECT key is used to activate or deactivate a function. Toggle functions (like On Screen Display (OSD), REAR etc) are tagged when active and untagged when not active.

The main menu selections are explained in detail below. Features available with some sources only are shown in grey color characters, while generally available functions are in normal case.
Increase/decrease functions (like CONTRAST and KEYSTONE etc) are adjusted using the trackball or keyboard cursor controls. The OSD field (in the lower left corner of the screen) indicates the actual settings.
8.3.1 THE BASIC AND COMMONLY USED FUNCTIONS These menu functions are increase/decrease functions. MUTE CONTRAST BRIGHTNESS COLOR KEYSTONE RESET HELP
Switches the sound on/off separately for each source. Controls the ratio between light and dark colors.
Adjusts color saturation.
Controls the whiteness of the image. Can be set to suit local lighting conditions. Adjusts the picture width in the top of the image. Enters source info-section in menu
Automatically adjusts the image correctly
THE FEATURES MENU SELECTIONS

POWER MANAGEMENT

System initiating power down (DPMS) of the projector to avoid image imprint on the module. Refer to the Projector Keyboard section for details.
Controls the serial interface of the MOUSE port. MOUSE (default) and CONTROL are available options. Selects whether the mask is applied downwards or upwards. Switches the on-screen echoing of controls on and off. This setting only affects the direct control operations, not the menu system Selects if the projector is to automatically search for an active source on the other input ports or not, when the selected source is not active. Manual source selection is maintained in both modes.

HIDE OSD

SOURCE SEARCH
MEM MEM MEM MEM MEM MEM MEM MEM MEM MEM
THE ADVANCED SELECTIONS The Advanced menu selections consists of three sub-menues; PICTURE: Presents a range of picture settings, see below. LANGUAGE: Presents the selection of languages. SERVICE: Presents service functions. PICTURE: TUNE
Controls the stability of the picture. An untuned image can be seen as sideways instability or swimming.
Adjusts image width. Generally, an incorrect width setting can be observed as an image too wide or too narrow, combined with vertical, unstable bands. Due to minor variations in graphic cards, the horizontal and vertical position may need adjustment. Select POSITION, then press SELECT and use the cursor keys or trackball. (Color Temperature) adjusts the red and blue color components.

POSITION

COLOR TEMP
SHARPNESS Controls the sharpness of the lines in an image. TINT 16 : 9 CEILING Controls the hue of an image, and is only active in NTSC-video. Switches between standard 4 : 3 format and 16 : 9 Widescreen format. Switches between an upright and an upsidedown projection by flipping the image vertically. Inverts the image for use in rear projection arrangements i.e. projection from the back of a screen.

MEM MEM MEM MEM MEM MEM MEM MEM MEM

LANGUAGE: LANGUAGES

SERVICE: FACTORY RESET INFO
This function resumes factory settings of all parameters.
A selection of languages is available for the menu options, including : English, German, French, Italian, Spanish, Norwegian, Japanese, Korean Traditional Chinese and Simplified Chinese. Other languages may apply.
Information on ABOUT which provides system information about the projector.
LAMP TIMER Used to reset the lamp timer when changing lamp.

MEM MEM MEM MEM

9 CEILING MOUNTING
The projector is prepared for ceiling mounting. As opposed to desktop use, ceilings vary in height and material. Also considerations must be made with respect to signal and power wiring.

SELECTING A MOUNT

212 mm
Various mounting systems are available from different sources. Contact your dealer for further details or consult vendor catalogs. Be sure that the vendor has tested the mount with this specific projector for operational safety. Check that the mounting brackets fit the integral M4 screw mounts of the projector (illustration below), and that the ventilation slots are not blocked.

MOUNTING IN THE CEILING

An improperly mounted projector is a potential danger to people and equipment. A projector and mount falling down may cause personal injury and material damage. Such damage caused by bad workmanship in mounting and operation may lead to legal action and should be avoided. Avoid ceiling mounting of the projector in areas of frequent or probable earthquakes.
When fixing the mount in the ceiling, be sure to check the ceiling material and if it will hold the total weight of the mount and the projector. Look for wood, steel beams or concrete that will secure a good and lasting fixture. Avoid plaster or other fragile materials that do not have sufficient structural properties. Follow the detailed instructions supplied with the ceiling mount for proper mounting and operation.

WIRING

Ceiling mounted projectors require long signal and power wires. The signals should be wired using high quality coaxial cable. The cables usually need to be customized. Some vendors have specialized in this field. Contact your dealer for further detail.
If the signal cables run over a longer distance from the source to the projector, a line buffer (distribution amplifier) may be needed (available from third party vendors). For potential fire reasons, the power wiring should be separately switched so that the projector can be switched off completely when not in use. The POWER on the remote control only suspends operation of the projector without switching off completely.

After having mounted the projector in the ceiling, test if the holding force is sufficient by adding a load to the mount at least double the weight of the combined projector and mount. The mount should hold this extra weight with no sign of fatigue and with no sign of mounting screws loosening.

10 TROUBLE-SHOOTING

This is a checklist to help you pinpoint any problem that may arise. Check the symptoms carefully if you experience any problem. The cure may be at your fingertips! Always check that the red LED indicator in the front of the projector flashes when a key on the remote control is pressed. This indicates that the projector is receiving signals from the remote control.
The projected image is too dark or too light Adjust the CONTRAST and BRIGHTNESS settings. Press RESET in the menu, which will remove the pre-determined settings for the current source, and make the set-up adjustments again. Some colors are unstable or flickering Check first that there are no loose cable connections, or any bent pins in the cable connector. You can try to adjust the image quality with the CONTRAST and BRIGHTNESS keys on the projector. Try to improve the tuning by accessing TUNE in the menu system.
Be aware that the projector has to cool down for 30 seconds after entering standby-mode, before it can be turned back on again. The projected image is completely black/only displaying logo Check if a source is connected.
The projector does not work Check if the mains cable is attached properly. Toggle the POWER button on the remote control or the POWER button on the projector. The unit may have overheated due to the ventilation slots being covered while the projector was in use. Also ensure that the ambient temperature is within spec. Check the air inlet filters, as they may need vacuuming (see Maintenance). Wait until the unit has completely cooled down before using again.
The whole image appears to be unstable or misplaced Adjust the WIDTH and TUNE settings (instability), or the image position settings (misalignment). Check that you are using a source with compatible resolution. The projector may be connected to a source with a non-standard computer (or video card). Adjust the frequency and position of the image.

Cooling fan is not working If the fan does not work the projector must not be used and should be returned to your dealer for repair. The remote control is not working The red LED on the remote control should flash when transmitting. If not, check batteries. Make sure you point the remote control at the projection screen or directly at the IR-receivers. The front red LED indicator flashes when receiving signals from the remote (see illustration below). The maximum range of the IR-transmitters is 15m (50 feet) - Are you standing close enough? If the effective range of the transmitters is significantly reduced, the remote control needs new batteries.
Front IR-receiver with red red LED indicator

Rear IR-receiver

The desktop mouse is not working Remember that the mouse must be connected before the computer source is switched on. COMPUTER 1 MOUSE works together with COMPUTER 1, and COMPUTER 2 USB MOUSE works together with COMPUTER 2. Are the mouse cable and mouse adapter connections secure? Check the mouse driver settings on the computer You must boot the computer after the cable has been connected for it to recognise the mouse. If you are unsure whether this was the case, reboot your computer.

11 MAINTENANCE

11.1 GENERAL
The projector needs very little maintenance in order to function properly.
Vacuum the air inlets periodically, especially when build-up of dust is observed. This will ensure cool operation of the unit. Do not scratch the lens surface. Use the lens cap when the projector is not in use for added protection. Remember to remove the lens cap before operating the unit!

LAMP REPLACEMENT

Disconnect the power cord before opening the lamp lid to change the lamp.
A lamp timer is available in the menu system under ADVANCED; SERVICE; INFO, that may be used to track lamp operating time. The user may reset the timer.
The projector is using a custom 150W UHP-lamp for illumination. The lamp is high pressure when hot (operating or immediately after switch-off). Lamp pressure is normal when cold.
Use a damp cloth to wipe off dust on the exterior. Clean the lens with a damp, non-abrasive cloth, using just water or a standard lens cleaning solution available from photographic dealers.
To change lamp, unscrew the lamp lid. A safety switch will cut off the power supply to the lamp completely. Unscrew the lamp holder, fold out the handle and pull out the old lamp holder. Insert a new lamp.

Screw Lamp lid

Projector seen from below

Lamp lid

Projector lamp assembly

Lamp assembly Screw

Push the lamp holder all the way until it positively stops and mount the screw. Fold the handle and remount the lamp lid. Mount all screws well.

CONFORMANCE

DUAL VOLTAGE

POWER SUPPLY

100 - 120 VAC, 60 Hz, +/- 10 % 220 - 240 VAC, 50 Hz, +/- 10 % 250 W operating
12 degrees 150 W UHP 1.3polysilicon TFT LCD 16.7 million 300:x 768 x (max) 12 - 150 MHz 15 - 100 kHz 43.5 - 130 Hz 0 - 1 Vpp 1V RMS 2 x 5 W speakers CE UL cUL FCC, Subpart J, Part 15
118 x 262 x 312 (399 incl. lens) mm 4.6 x 10.3 x 12.3 (15.7incl. lens) inch 4.9 kg / 10.8 lbs. Manual zoom and focus lens 1.3 zoom ratio f 55-72 mm F 2.0 2.3 0.74 - 7.69 m / 29 - 303 inches (wide) 0.56 7.69 m / 23 - 303 inches (Tele) 1.2 - 12 m / 3.9 39.3 ft
UNIT SIZE (H x W x L) UNIT WEIGHT BATTERIES FUNCTIONAL RANGE COMPATIBILITY CONFORMANCE
27 x 48 x 140 mm / 1.06 x 1.89 x 5.51 inch 96 g / 0.21 lb. (with batteries) 2 pcs LR03/AAA 1.5V penlight
15 m (50 ft)/Using cable 20 m (66 ft) CE, FCC

COMPATIBILITY

The projector is compatible with the interfaces and resolutions shown below, some of which are predefined. However since different varieties of these exist, a frequency adjustment may be needed. VGA 640 x x x x 400 SVGA XGA SXGA MAC 800 x 600
1024 x 768 (native) 640 x x 624

1280 x 1024 (compressed)

PAL/ SECAM

1024 x 768

1152 x 870 (compressed) 640 x 480 lines 768 x 576 lines
Microsoft 2-key serial, MAC, PS/2, USB

PROJECTION DISTANCES

The following table shows the combinations of projection distances and screen sizes that are possible.

MINIMUM

DISTANCE DIAGONAL WIDTH HEIGHT
4.00m/ 157 1.88m/ 74 1.50m/ 59 1.13m/ 44
1.20m/ 0.74m/ 0.60m/ 0.45m/ 1.20m/ 0.56m/ 0.45m/ 0.34m/
4.00m/ 157 2.48m/ 98 1.98m/ 78 1.49m/ 59
Actual image size at any given distance may vary from specifications.

MAXIMUM

9.00m/ 354 5.58m/ 220 4.46m/ 176 3.35m/ 132 12.40m/ 488 7.69m/ 303 6.15m/ 242 4.61m/ 181 9.00m/ 354 4.23m/ 167 3.38m/ 133 2.54m/ 100 16.40m/ 646 7.69m/ 303 6.15m/ 242 4.61m/ 181

13 CONNECTORS

The pinouts of all the connector ports is described in this section.
Do not connect any devices or cables other than those supplied with the projector into the connector ports on the projector unit, even if the connector ports appear identical, as this voids any warranty and may cause permanent damage to the projector.
This port relays all signals from the computer to the projector.
15 PIN HIGH DENSITY DSUB FEMALE (FRONT VIEW)

Reorient the receiving antenna.
This equipment generates and uses radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This equipment complies with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied with the equipment. Operation with non-certified peripherals or non-shielded cables is likely to result in interference to radio and TV reception.

410 270

100 100

Seite 116

Thomson Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba
TVP500D (Beamerlampenmodul) 38VL14G (Rckprojektionsfernseher) (Beamerlampenmodul) 40PL93G (Rckprojektionsgert) (Beamerlampenmodul) 40PW8DG 44PL93G Luftfilter 44PL93G (Rckprojektions-Fernseher) (Beamerlampenmodul) AP-1500 (Beamerlampenmodul) AP-1500SX (Beamerlampenmodul) AP-2000 (Beamerlampenmodul) AP-2000SX (Beamerlampenmodul) F1 (Beamerlampenmodul) G1 (Beamerlampenmodul) G3 (Beamerlampenmodul) G5 (Beamerlampenmodul) G7 (Beamerlampenmodul) MT500 (Beamerlampenmodul) MT-800 (Beamerlampenmodul) S200 (Beamerlampenmodul) S201 (Beamerlampenmodul) S20x (Beamerlampenmodul) T400 (Beamerlampenmodul) T401 (Beamerlampenmodul) T40x (Beamerlampenmodul) T500 (Beamerlampenmodul) T501 (Beamerlampenmodul) T50x (Beamerlampenmodul) T700 (Beamerlampenmodul) T701 (Beamerlampenmodul) 1000

Seite 117

Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba
T70x (Beamerlampenmodul) T80 (Beamerlampenmodul) T90 (Beamerlampenmodul) T90U (Beamerlampenmodul) T91 (Beamerlampenmodul) T91U (Beamerlampenmodul) TDP MT800 (Beamerlampenmodul) TDP-490 (E) "nackte Lampe" (Beamerlampe) TDP-490 (E) (Beamerlampenmodul) TDP-590 (E) (Beamerlampenmodul) TDP-591 (E) (Beamerlampenmodul) TDP-B1 (Beamerlampenmodul) TDP-B3 (Beamerlampenmodul) TDP-D1 (Beamerlampenmodul) TDP-D1-US (Beamerlampenmodul) TDP-D2 (Beamerlampenmodul) TDP-D2-US (Beamerlampenmodul) TDP-LT1 (Beamerlampenmodul) TDP-MT100 (Beamerlampenmodul) TDP-MT5 (Beamerlampenmodul) TDP-MT8 (Beamerlampenmodul) TDP-MT8U (Beamerlampenmodul) TDP-P3 (Beamerlampenmodul) TDP-P4 (Beamerlampenmodul) TDP-P5 (Beamerlampenmodul) TDP-P5-US (Beamerlampenmodul) TDP-P6 (Beamerlampenmodul) TDP-S1 (Beamerlampenmodul)

Seite 118

TDP-S2 (Beamerlampenmodul) TDP-S20U (Beamerlampenmodul) TDP-S2V (Beamerlampenmodul) TDP-S3 (Beamerlampenmodul) TDP-T1 (Beamerlampenmodul) TDP-T3 (Beamerlampenmodul) TDP-TW90U (Beamerlampenmodul) TDP-X4100E (Beamerlampenmodul) TDP-XL4100E (Beamerlampenmodul) TLP-250 (Beamerlampenmodul) TLP-251 (Beamerlampenmodul)dx TLP-260 (Beamerlampenmodul) TLP-261 (Beamerlampenmodul) TLP-280 (Beamerlampenmodul) TLP-281 (Beamerlampenmodul) TLP-310 (Beamerlampenmodul) TLP-311 (Beamerlampenmodul) TLP-380 (Beamerlampenmodul) TLP-410 (Beamerlampenmodul) TLP-410U (Beamerlampenmodul) TLP-411 (Beamerlampenmodul) TLP-411U (Beamerlampenmodul) TLP-450 (Beamerlampenmodul) TLP-451 (Beamerlampenmodul) TLP-470 (Beamerlampenmodul) TLP-471 (Beamerlampenmodul) TLP-510 (Beamerlampenmodul) TLP-510A (Beamerlampenmodul)