Use & Care Guide Dishwasher

ASKO D3122

Dear ASKO-customer, Congratulations on your excellent product choice and welcome to the Asko family. A global family with its roots in Scandinavia. Cleaning results, design, environmental impact on nature and home, user-friendliness, low consumption of time, energy and water, a long life span, reliability. Good appliances should include all of these. And this is what we try to give you. When you buy an ASKO product, we want you to feel assured that the inside is as good as the outside and that the ethics and morals on which we built this machine are just as high as the quality and performance you get from it. That is what Scandinavian quality is all about. In order to get the best possible results from your machine and all its functions, please read this Use and Care Guide before using the machine for the first time. And if you have any questions, please do not hesitate to call us or contact us via our web site. Best regards from Scandinavia and the people at Asko.

Contents

Contents Before doing your first wash Read the directions of use Take care with certain materials Check the door Check water hardness level Machines with water softener Safety General Winter storage/Transport Overfill protection Cleaning Packaging materials Scrapping Page 3-Do you want to load more dishes? If the machine is switched off with the main switch After dishwashing Eco-dishwashing 14 Only perform washes with a full machine Do not rinse before dishwashing Choose environmentally-friendly dishwasher detergent Fragile dishes Fragile decoration Crystal/glass Silver Cutlery with glued handles Wood Aluminium Plastic Protect plastic goods Standard program Cleaning Coarse filter Fine filter Drain pump Spray arms Door Rinse aid Pour in rinse aid Select dosage Salt Pour in salt Settings Setting water hardness Fault indications 15
Child safety 7 Child-safe dishwashing Child safety lock Protect your children! Dishwasher detergent is corrosive Parts of the dishwasher Technical information Baskets Control panel Dispenser 9 10

16-17 18-19

Basic Course 11-12 Load the baskets correctly Dispense dishwasher detergent Select program Options Temperature Drying Press start Changing options 13
Troubleshooting 24-26 The dishes are not clean Stains or a film on the china The china has a whitish-blue sticky film Stains on stainless steel or silver Stains which remain after dishwashing Rattling sounds during dishwashing The machine will not start Water remains in the machine Overfilling/leakage Bad odour in the machine Performance information 27
Setting water hardness Service & guarantee Own comments Search words Quick Guide 35 36
28-32 Installation Suggestions on positioning the dishwasher A. Built-in B. Freestanding C. Semi-freestanding Connection to water supply Connection to electricity Drainage connection Positioning the machine A. Adjusting machines with six feet (freestanding dishwasher) B. Adjusting machines with three or four feet C. Adjusting dish washers with adjustable foot Installing the plinth (Only with kick-plate as accessory) Screw the dishwasher into place Fitting fixed kick-plate Fitting strip seal (on floor plinth covering plate) NB! Not all models
Before doing your first wash
Read the directions of use
Read the directions of use before starting to use your machine, especially the Safety, Child Safety and Basic Course sections.
Do you have a machine with a water softener?
If you are unsure whether your machine has a water softener, see the illustration. If there is a cover cap in the bottom of the machine, it has a water softener and needs to be filled with salt. See the Salt chapter.
Cover for the salt compartment
Take care with certain materials
Read the section Fragile dishes before washing china with unglazed decoration or other household goods made of plastic, wood or crystal requiring careful treatment.

Check the door

Check that the door of the dishwasher fits properly: open the door a little and let it go. Does it stay exactly where you released it? If not, you should check the installation instructions or consult the installer.
Check water hardness level
Phone your local Water Board to check the water hardness in your area. This is important when dispensing dishwasher detergent and rinse aid.
Machine with water softener
Once you know the water hardness, you can set the water softener, see Settings. Before you start dishwashing, you must also fill with salt, see Salt. *NB! After filling, there may be a short delay before the signal light goes out.
CAUTION! Never pour dishwasher detergent into the salt compartment. This will damage the water softener

Safety

General
Read and keep the directions for use! Installation of water, drainage and electricity must be carried out by a qualified professional. Do not use the dishwasher for any purposes other than those stated in these directions for use. Do not load the dishwasher door or the dishwasher baskets with anything other than dishes. Only use dishwasher detergent! Place knives and other sharp objects so that they cannot cause injury to people or damage the dishwasher. Damaged mains cables must only be replaced by an authorised professional. By installation of the unit the supply cord shall be easily accessible. The door should not be left in the open position since this could present a tripping hazard. The appliance is not intended for use by young children or infirm persons without supervision. Never put dishes containing solvent residue in the machine due to risk of explosion. Neither may dishes containing ashes, wax or lubricating grease be washed in the dishwasher.

Winter storage/Transport

Store the machine away from frost. Avoid long journeys in extreme cold. Transport the machine in an upright position or lying on its back.

Overfill protection

The overfill protection starts pumping out water and closes off the water intake if the machines water level exceeds the normal level. If the overfill protector starts up, shut off the water supply and phone for service. See also Troubleshooting on pages 23-25.

Closed Open

Parts of the dishwasher*
1. Upper basket 2. Spray arms 3. Lower basket 4. Cutlery basket 5. Rinse aid dispenser 6. Dishwasher detergent compartment 7. Main switch 8. Program panel 9. Filter 10. Type plate
* Details may differ depending on model and market! 5

Technical information

Height Width Depth Weight Capacity** Water pressure Connection Max output Accessories
* Details may differ depending on model and market! **In accordance with standard, AS/NZS 2007 ***See type plate. ****Without fitted wooden door.
820-870 mm 596 mm 550 mm**** 48 kg/51 kg with water softener* 14 place settings 0.03-1.0 MPa (0.310 kp/cm2) 1-phase, 230 V, 50Hz 10/10A*** 1900 W*** Work surface, Side panels, Anti-tilt

Baskets*

Upper basket

Lower basket

Cutlery basket
*Details may differ depending on the model and market!

Control panel

PROGRAM

S TA R T

1. Program selector 2. Heavy wash 3. Normal wash 4. Quick wash
5. Rinse & Hold 6. Temperature 7. Drying 8. Start/stop

Dispenser

1. Compartment for main wash dishwasher detergent 2. Compartment for pre-wash detergent 3. Refill indicator rinse aid (not all models) 4. Rinse aid cover 5. Detergent compartment cover

Basic Course

Below are step by step instructions to help you achieve the best possible dishwashing results.
Load the baskets correctly!
Thanks to Super Cleaning System, you do not need to rinse the dishes under running water. Scrape off large food particles before loading the machine. Convenient and environmentally friendly! Place glasses, cups, bowls, side plates and saucers in the upper basket, wine glasses should be placed on the wine glass shelf, and knives in the knife stand if present.

Detergent dosage

Detergent should be dispensed in accordance with the waters hardness level. Follow the dosage instructions on the detergent package. If your dishwasher is fitted with a water softener, dispense as for soft water. Pour the dishwasher detergent into the dishwasher detergent compartment. There is one compartment for pre-wash and one for main wash, see Dispenser. Phone the dishwasher detergent manufacturer if you have any questions regarding the detergent. Dishwasher tablets Halve the tablet if it is difficult to close the dispenser cover. There is a risk that the dishwasher detergent will not break down properly to give the correct dosage if the cover is tight and cannot be opened correctly.
Ensure that all soiled surfaces face inwards or downwards!
Place dinner plates, side plates, serving dishes, saucepans and cutlery (in the cutlery basket) in the lower basket. Stand the cutlery with handles downward and as spread out as possible. Ensure that spoons are not resting inside each other. Do not put cutlery made of different materials, e.g. silver and stainless steel, in the same compartment (risk of stains). Check that the spray arms are able to move freely. See Fragile dishes, if you want to wash articles that may be fragile.

3in1/ Combined detergent NB!
Read through the directions for these products carefully. If anything is unclear, contact the dishwasher detergent manufacturer.

CAUTION!

Only use dishwasher detergent Detergent for washing by hand cannot be used as the build-up of foam impedes the machines performance. 11
Switch on the main switch and close the door Select program
Select a program by pressing the program selector one or more times until the required program is displayed. Heavy wash The Heavy Wash program should be used for heavily soiled dishes, e.g. saucepans, pots and gratin dishes. If there is still space in the machine after loading such items, you can add plates etc. Normal wash Used for washing normally soiled dishes such as plates, serving dishes, cups and glasses, etc. For washing normally soiled mixed loads use the Normal wash program with normal temperature and normal drying.
To save more water and energy use economy temperature and economy drying. Quick wash Select Quick Wash if the dishes are very lightly soiled. This program is used for very lightly soiled glass and china, e.g. coffee cups. Rinse & Hold For rinsing the dishes while waiting for the machine to be filled. If you wish to use further options continue to point 5. Otherwise you can now start the dishwasher, see point 6. 12

Options

Select options
To select an option, press one of the option buttons.

Press Start

The dishwasher will now start. It manages the entire wash automatically. Ensure that the door is properly closed or the machine will not start. The circle around the Start/ Stop button lights up progressively as it works through the program.

Temperature

With the temperature option button you can select the wash temperature yourself. You can vary the temperatures as follows: Program Heavy wash: Normal wash Quick wash: Normal C 50 Eco C 30

Changing options

If you want to change program after having started the dishwasher, press the Start/Stop button for three seconds. Then select a new program and press the Start/Stop button.
The field next to the button lights up if you have selected the normal temperature. The selection remains until a change is made.
Do you want to load more dishes?
Open the door slowly; the machine stops automatically, put in the dishes, close the door and the dishwasher will continue from where it left off.

Drying

If you require a better drying result, press the option button Normal dry. The field next to the button lights up. Should you require a program with Economy drying press again and the light will go out. Cannot be used in the Rinse & Hold program.

If the machine is switched off from the main switch
(or in the event of a power cut) before the washing program has been completed, the interrupted program will continue when power comes back on.

After dishwashing

When the dishwasher has finished, the whole circle around the Start/Stop button will be lit up. It will then only consume standing current. Should you wish to disconnect the current completely, just switch off at the main switch. Turn off the water tap if the machine is not to be used for an extended period, e.g. during holidays.

Eco-dishwashing

Only perform washes with a full machine
Put off dishwashing until the machine is full, and in this way you will save energy.
Do not rinse before dishwashing
Thanks to the dishwashers Super Cleaning System you do not need to rinse the dishes under running water before loading them into the machine.
Choose environmentally-friendly dishwasher detergent
Read environmental declarations on the package!

Fragile dishes

A number of household goods are not suitable for machine washing. There can be many reasons for this. Certain materials cannot withstand intense heat, others can be damaged by the dishwasher detergent.
Cutlery with glued handles
Certain types of adhesive cannot withstand machine washing. In such cases the handles can come loose.

Fragile decoration

China with decoration on top of the glaze (the article has a rough feel) should not be machine washed.
Wooden articles should only be machine washed if they are labelled as dishwasher proof.

Crystal/ glass

Place the articles so that they do not knock together during the wash. Antique and very fragile items should not be machine washed.

Aluminium

Aluminium can be dulled by machine washing. However, good quality aluminium saucepans can be machine washed, although a reduction in lustre should be expected.

Silver

Silver and stainless steel items should not come into contact with each other as the silver can discolour.

Plastic

Certain types of plastic cannot withstand the high temperature generated in machine dishwashing.
To protect plastic articles
Select a program with Economy temperature and Economy drying.

Standard program

Option Program

Temp. Drying Prewash _ -

Program procedure
Main wash C _ 45 _ 30 Rinses Final rinse C _ 45 _ -

Consumption

**Time
Energy kWh Water Min. (appr.) Cold Warm Cold Warm Fan water water Litres water water (20C) (60C) (20C) (60C) _ X X X _ _ 1,7 1,5 0,6 _ 0,1 0,01 _ 1,0 0,8 0,2 _ 0,10 0,01 _ 14 _ _ 95 _ _ 80 _ 15 4
Pots & pans Heavy wash Normal wash Normal wash* Delicate wash Quick wash Rinse & hold

_ 2 _ 2 1

Normal Normal Normal Normal Eco _ Eco Eco _ Eco -
* Tested program for Standard AS/NZS 2007.1:2003 **All quoted times are only indicative, fluctuations may occur. Due to water temperature, water pressure, variations in voltage etc. Hot water connection approx. 60C. Cold water connection approx. 15C.
This page is empty for printing reasons.
The dishwashers inner container is made of stainless steel and is kept clean through normal use. However, if you have calciferous (hard) water, lime deposits can form in the dishwasher. In this case, run a normal wash program with two tablespoons of citric acid in the dishwasher detergent compartment.
Coarse filter Tubular strainer

Coarse filter

The coarse filter collects large food particles which cannot pass the outflow pump. Lift out and empty the coarse filter as necessary. Dont forget to replace it!

Fine filter

The residue which collects on the fine filter is automatically rinsed off with each wash. The fine filter should still be cleaned once or twice a year. 1. Remove the fine filter by first turning the filters tubular strainer anti-clockwise and then lifting it straight up with the coarse filter. 2. Clean with a dishwashing brush. Ensure that the edges are properly sealed when replacing the fine filter.

Drain pump

The pump can be accessed from the inside of the machine. 1. Always remove the plug from the wall socket before you clean the pump. 2. Remove the coarse screen first by pressing together the two lugs and pulling the screen upwards. 3. Now loosen the tubular part of the screen by turning it anticlockwise and removing the fine screen. 4. Finally remove the small adapter to the left of the bottom drain. 5. Its possible, by inserting your finger in the hole, to turn the pump impeller and remove any blockage. 6. Refit the adapter and screens. 7. Insert the plug in the wall socket.

Pump plug

If you still cannot start the machine and a humming noise can be heard, then the overfilling protection has been activated. Shutoff the water Remove the plug from the wall socket Call Service
Do not forget to replace the pump plug.

Spray arms

The holes and bearings can occasionally become clogged. 1. Pull the lower spray arm straight up to release it. 2. Scrape away the debris with a needle or similar. The spray arms also have holes on the underside. To release the upper spray arm, the upper basket must be removed. 3. Pull out the basket and turn the basket stop outwards on both rails (see picture). The basket can now be removed. 4. Remove the upper spray arm in the same way as the lower arm and clean it.
When cleaning the edge around the door, use only a slightly damp cloth, possibly with a little detergent. Do not use a spray bottle or similar around the door catch. This is to ensure that water does not penetrate into the door catch and come into contact with the electrical components.
Do not use a spray bottle or similar around the door catch. Tip! In order to prevent bad odours in the dishwasher, clean the strips and corners with a dish brush and low-lather detergent.

Rinse aid

Pour in rinse aid
Drying proceeds more quickly if you use rinse aid. Machines with indicator on the panel When the rinse aid has run out and more is needed, the rinse aid symbol on the panel lights up*. To fill with rinse aid: 1. Turn and lift up the cover of the rinse aid compartment to the right of the dispenser. This is where you top up and set the amount of rinse aid to be dispensed in each wash. 2. Carefully pour in rinse aid up to the knob for dosage setting. Alter dosage if required. Do not forget to close the cover.

Select dosage

The dispenser is usually set at 1= soft water. However, depending on the water hardness, it may be necessary to change the dosage. Open the rinse aid cover. Here you will find the dispensers adjustment dial. Settings 16: the harder the water, the higher the dosage. Where the water hardness exceeds 1012 odH you should use rinse aid with citric acid (acid rinse aid) if the dishwasher does not have a water softening filter. If the dishwasher has a water softening filter, dispense as for soft water. Too much rinse aid can lead to the build-up of foam. If your water is particularly soft, you can dilute the rinse aid (1 part rinse aid, 1 part water). Too much rinse aid can cause streaks on the dishes, while too little can result in water stains.
After filling there may be a short delay before the signal light goes out. Machines with refill indicator There is a refill indicator in the middle of the dispenser (see picture). If the refill indicator is totally black, there is sufficient rinse aid. However, if the indicator has a more transparent appearance, you need to top up with rinse aid (see above).

Open Refill indicator Closed
Cover for rinse aid Open by turning and lifting the cover!

Pour in salt

(applies to dishwashers with water softeners)
Before using a dishwasher with a water softening filter, you must fill the salt compartment with salt. Use coarse salt or special salt for dishwashers. It is best to fill with salt when you are about to do a wash, as the dishwasher needs to be rinsed out immediately after filling. Proceed as follows the first time: 1. First unscrew the cover as illustrated. 2. Place the funnel, which is supplied with the dishwasher, into the compartments filler hole. First pour in approximately 1 litre of water. 3. Then fill the compartment with max 1.5 kg salt. 4. Wipe away excess salt so that the cover can be properly screwed into place. 5. Run a Normal wash program so that any salt in the machine is rinsed away. When the salt runs out, unscrew the cover and fill the compartment with salt. Water is only needed on the first occasion! Wipe clean and screw back in place. Run a Normal wash program so that any salt is rinsed away. Occasionally check to see if more salt is needed. A green indicator can be seen in the cover of the salt compartment.
Never pour dishwasher detergent into the salt compartment. The water softener will be ruined!

Settings

Setting water hardness
If you have a dishwasher with a water softener, you may need to change the setting depending on the waters hardness level. Phone your local Water Board to check the water hardness in your area. The dishwasher is set for low water hardness on delivery.

L12 L4 L11

S4 L5 L10
1. Switch off the dishwasher with the main switch. 2. Press the main switch while holding in the Start/Stop button. 3. Release both buttons and the L7 light will flash. 4. Select desired setting (see table below) by pressing repeatedly on the Program button.

Setting

All extinguished L1 lit L1, L2 lit L1, L2, L3 lit L1, L2, L3, L4 lit L1, L2, L3, L4, L5, L11 lit
L1, L2, L3, L4, L5, L6, L11, L12 lit

dH 0-5* 6-8 9-14

Stains which remain after dishwashing.
Change to a detergent with bleach.
Rattling sound during dishwashing.
The dishes are not properly loaded or the spray arms are not rotating.
Check that the china is loaded securely. Spin the spray arms to make sure that they rotate. Check
The machine will not start.
You have forgotten to switch on the main switch. The door is not properly closed. A fuse has blown. The plug is not plugged in.

Check

Check Check Check
To restart the machine, press Start/stop for 3 seconds. Now select a new programme and press Start/stop.
The water tap is off. Overfilling/leakage A droning sound (drainage

1. Close the water tap.

pump) can be heard from the machine, this does not stop when the power is switched off using the main power switch.
2. Pull out the plug. 3. Call a service engineer
Water remains in the machine.
Obstruction in the drain hose.
Disconnect the drain hose where it is connected to the sinks water trap. Check that no debris has become stuck. Is the cone-shaped part of the pipe cut so that the diameter is at least 16 mm? Check that the hose is free from kinks or sharp bends. Clean out the coarse filter, the fine filter and the filter. Clean out the drain pump. See chapter on cleaning Clean with a dish brush and low-lather detergent. Run a Normal Temperature program around once a month.

Kinks in the drain hose.

The filters are clogged.

Items in the drain pump.

Bad odour in the machine
Dirt along the strips and in corners Low-temperature programs have been selected for a prolonged period.
The dishes are not sufficiently dry
Drying power too low. The machine is not fully loaded.
Activate the Normal drying option (not all models). Put a full load in the machine. Replenish rinse aid or increase the dose of rinse aid. Open the door slightly once the program has finished.
The rinse aid has run out or the set dose is too low.

Performance information

Test dosage

Heavy wash/Normal wash Main wash 25 gram Standard detergent. Rinse aid dosage 3.

Energy labelling

Australia: Dishwasher program: Normal wash, 45C, Economy drying. Program time: Connection: Test method noise measurement: AS/NZS 2007
95 minutes. Cold water IEC-704-3
Example of dishwasher loading

AS/NZS 2007.1:2003

Height: Width: Weight: Capacity: Water pressure: 820-870 mm 596 mm 48 kg* 51 kg with water softener* 14 IEC place settings 0.03-1.0 MPa 0.3-10 kp/cm2 (Bar) 3-100 N/cm2 See type plate See type plate

Connection: Output:

*The weight can vary due to varying specifications.

Installation

Suggestions for positioning the dishwasher
The dishwasher can be built in, fully freestanding or semi-freestanding. Built-in installation

820-870

570 20
Connection to electricity, water and drainage must be carried out by a suitably qualified person. A. Built-in The dishwasher can be built in under a worktop with a working height of 820 - 870 mm. The width measurement must be at least 600 mm. For additional measurements, see picture. B. Freestanding A freestanding dishwasher must be fitted with anti-tilt. This comprises two fastening irons which are screwed into place as illustrated. The dishwasher is then pushed in so that the fastening irons grip onto the rear feet. The dishwasher cannot now tilt in the event a load is placed on the open door. If the dishwasher is to be fully freestanding, both side panels and the work top should be fitted. These accessories can be purchased where you purchased the dishwasher.

820870

100150
Freestanding installation
A fully freestanding dishwasher must be fitted with anti-tilt. C. Semi-freestanding If the dishwasher is positioned so that either side is visible, a side panel can be fitted. These accessories can be purchased where you purchased the dishwasher. D. Machines with wooden door Stronger door springs are available for purchase for machines with a fitted wooden door. Springs are available for various weights and sizes of wooden door. Door springs can be purchased from the retailer who sold you the dishwasher. Tip! A machine with side panels and a counter top (freestanding) can, of course, also be installed as a built-in unit.
Connection to water supply
There must be a shut-off tap on the water supply pipe. The shut-off tap should be positioned above the work surface or at the front of the sink unit. The water supply pipe has a connection with a 1/2 or 3/4 internal thread depending on country. When the installation is complete, the shutoff tap should be opened to allow the pressure to settle for a while and to check that all connections are tight.
The lead must be disconnected or the socket voltage-free while the work is carried out!

Drainage connection

When the drain hose is routed to a connection nipple at the sinks water trap (see illustration 1), note that the hose must be fastened level with the underside of the sink unit otherwise the dishwater from the sink can run down into the dishwasher. The drain hose is threaded onto a cone-shaped connecting pipe at the sink units water trap. The cone-shaped pipe must be cut to an internal diameter of at least 16 mm. For other alternative connections, see illustrations 2 and 3. The drain hose may be lengthened by a maximum of 3 m (the total length of the drain hose may not exceed 4.5 m). Any connections and connecting pipes must have an internal diameter of at least 16 mm. However, the drain hose should ideally be replaced with a new hose without joins.
No part of the drain hose may be more than 950 mm above the bottom of the machine. The hose must not be routed directly to the floor drain or similar. In such cases, the hose can act as a siphon and empty the dishwasher. The hose must always discharge at least 350 mm above the bottom of the machine.
It is recommended that connection should be to cold water.
Connection to electricity
A dishwasher fitted with a lead and plug must be connected to an earthed socket. Repairs and maintenance affecting safety or performance must be carried out by a qualified professional. Technical data See the type plate on the right hand side of the door. Connection to drainage
The hose must be fastened level with the underside of the work surface.

Illustration 1

Illustration 2

Illustration 3

Max 3 m

Max 950 mm

Max 950 mm Min 350 mm

Min 350 mm

Details may differ depending on the model and the market!

Positioning the machine

A. Adjusting machines with 6 feet (freestanding dishwasher) 1. Adjust the height of the dishwasher with the four steel feet. 2. Lock the feet with the nuts. NB! The dishwasher must not be allowed to lean more than 5 mm.

Stlftter Steel feet

clockwise to raise or anti-clockwise to lower. 5. Check that the height of the machine corresponds to the height from the floor to the underside of the work surface. Tighten the locking nuts (locking nut) on the rear feet. 6. Push the dishwasher into place. 7. Finely adjust the front feet (the machine may lean max. 5 mm) and tighten the locking nuts. C. Adjusting dishwashers with adjustable foot 1. Start by measuring the height from the floor to the underside of the work surface. 2. Install the sliding feet on the dishwasher.

3. After the steel feet have been adjusted, screw down the two rubber feet tightly against the floor. The rubber feet now work as anti-tilt protection. 3. Measure the height from the floor to the top edge of the dishwasher. 4. Tilt the dishwasher forward a fraction and roughly adjust the rear foot by screwing the set screw at the front clockwise to raise or anti-clockwise to lower (illustrated below). Use a broad screwdriver or a hexagonal head screwdriver. 5. Adjust the front feet by turning them clockwise to raise or anti-clockwise to lower. 6. Check that the height of the machine corresponds to the height from the floor to the underside of the work surface. 7. Push the dishwasher into place. 8. Finely adjust the feet (the machine may lean max. 5 mm) and tighten the locking nuts on the front feet.
B. Adjusting machines with three or four feet 1. Start by measuring the height from the floor to the underside of the work top of your kitchen bench. 2. Install the sliding feet on the dishwasher.
3. Measure the height from the floor to the top edge of the dishwasher. 4. Adjust all the feet by screwing them 30

Not all models

Slide the dishwasher into place Pull the drainage hose and connection pipe when the machine is pushed into place. Check that the hose has no kinks or sharp bends, and check that there is nothing that can damage the hoses.

Fitting fixed kick-plate

Installing the plinth
(Only with kick-plate as accessory) The dishwasher has two kick-plates (some models). The taller one should be used if the machine is to be 850 - 870 mm high and the depth of the plinth can be varied between 45 - 105 mm. The lower one is to be used if the machine will be 820 - 845 mm with a plinth depth of between 50 - 105 mm. Attach the enclosed felt insulation to the kickplate (some models). Set the correct plinth depth as follows: 1. Bring the grey hooks towards each other and pull out the brackets as far as required. Press in the catches so that they lock the brackets in place.
2. Suspend the kickplate from the brackets by pushing into the slots.

Fitting strip seal

(on floor plinth covering plate) Proceed as follows: 1. Remove the plastic plinth by gripping with both hands under the plastic plinth (A), and break outwards and upwards.
2. Undo the two screws on the covering plate (B). 3. Glue the accompanying rubber strip (C) to the underside of the covering plate (against the floor). 4. Screw the covering plate back into place. Adjust the covering plate so that the rubber strip is just in contact with the floor.
Screw the dishwasher into place
The enclosed plastic plugs are used for covering the screw holes if the dishwasher is to be screwed at the sides. After fixing check that the front feet are in contact with the floor.

5. Replace the plastic plinth

Service & guarantee

Service
Before calling for service, check to see whether the faults are due to something that you can rectify yourself. See Trouble shooting pages 24-26.

Guarantee

For guarantee details, see the guarantee card.

Own comments

Search words
Child safety 5, 7 Crystal 5, 14
Dishes 5, 6, 11, 12, 14 Dishwasher detergent 6, 8, 10, 11, 13, 17, 20 Drainage 27, 28
Energy 13, 26 Environment 36

Guarantee 32

Lime 17
Plastics 5, 14 Programs 12, 15, 16

Quick Guide 36

Rinse aid 5, 8, 10, 18, 19
Safety 5, 6, 28 Salt 5, 20, 21 SCS 15 Service 6, 22 Settings 21 Silver 11, 14
Washing programs 12, 17 Water hardness 5, 21, 31 Water softener 5, 8, 11, 20, 21, 26, 31 Winter storage 6

Quick Guide

1. Loading the baskets
Remove large food particles and debris. There is no need to rinse thanks to the Super Cleaning System.
2. Dispensing dishwasher detergent
The detergent compartment has a small compartment for pre-wash and one for main wash.
3. Ensure that the spray arms can rotate freely 4. Switch on the main switch 5. Close the door 6. Select program and press start
For washing normally soiled mixed loads use the Normal wash program with normal temperature and normal drying. To save more water and energy use economy temperature and economy drying.

Mini Program Guide

* Tested program for Standard AS/NZS 2007.1:2003
Art. No.: 27. Rev. 01. We reserve the right to make changes. Desclaimer! Not all models contain all the features listed in this manual. Printed on environmentally-friendly paper which meets the demands of Friends of the Earth and the Swedish Society for Nature Conservation.

Big Bear City California 92314 CA http://www.centralmasshomewarranty.com Dishwasher Manuals Asko Dishwasher Manuals 2-drawer Dishwasher, Automatic Dishwasher, Built-in Dishwasher, Compact Dishwasher, Convertible Dishwasher Asko Dishwasher Manuals
Asko USE AND CARE GUIDE dishwasher D3122 D3122 Asko Dishwasher Manuals
http://www.centralmasshomewarranty.com
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Dishwasher Manuals 2-drawer Dishwasher, Automatic Dishwasher, Built-in Dishwasher, Compact Dishwasher, Convertible Dishwasher Asko USE AND CARE GUIDE dishwasher D3122 D3122 Asko Dishwasher Manuals