Chapter 5: BIOS Setup.. 5-1
5.1 Managing and updating your BIOS. 5-2 5.1.1 Creating a bootable floppy disk.. 5-2 5.1.2 Updating the BIOS.. 5-3 BIOS Setup program... 5-4 5.2.1 BIOS menu screen.. 5-5 5.2.2 Menu bar... 5-5 5.2.3 Navigation keys... 5-6 5.2.4 General help... 5-6 5.2.5 Sub-menu.. 5-6 5.2.6 Scroll bar... 5-6 5.2.7 Pop-up window.. 5-6 Main menu... 5-7 5.3.1 Primary IDE Master.. 5-8 5.3.2 Primary IDE Slave..5-11 5.3.3 Secondary IDE Master..5-11 5.3.4 Secondary IDE Slave..5-11 Advanced menu... 5-12 5.4.1 Advanced BIOS Features. 5-12 5.4.2 CPU Configuration.. 5-13 5.4.3 Memory Configuration... 5-14 5.4.4 Chipset... 5-16
5.4.5 Onboard Device... 5-18 5.4.6 PCIPnP... 5-22 5.4.7 USB Configuration.. 5-24 Power menu... 5-25 5.5.1 APM Configuration.. 5-26 5.5.2 Hardware Monitor.. 5-29 Boot menu.. 5-30 5.6.1 Boot Device Priority.. 5-30 5.6.2 Hard Disk Boot Priority.. 5-31 5.6.3 Removable Device Priority.. 5-31 5.6.4 Boot Settings Configuration.. 5-32 5.6.5 Security... 5-33 Exit menu... 5-35
Chapter 6: Driver installation.. 6-1
6.1 RAID... 6-2 6.1.1 RAID configurations.. 6-2 6.1.2 Installing hard disk drives.. 6-2 6.1.3 Setting the RAID item in BIOS. 6-3 6.1.4 RAID configuration utility.. 6-3 6.1.5 Creating a RAID driver disk.. 6-21 6.1.6 Installing the Intel 6300ESB RAID controller driver... 6-22 LAN.... 6-29 6.2.1 Windows 2000 Server.. 6-29 6.2.2 Windows 2003 Server.. 6-31 6.2.3 Red Hat Linux 9.0.. 6-33 VGA Driver Installation... 6-34 6.3.1 Windows 2000/2003 Server.. 6-34 6.3.2 Red Hat Linux 9.0.. 6-34
Appendix: References...A-1
A.1 Power supply... A-2 A.1.1 General description.. A-2 A.1.2 Specifications.. A-3 A.2 Qualified Vendors List (QVL)... A-4 A.3 Troubleshooting... A-5

Notices

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

2.1 Chassis cover

Remove the chassis cover to access the internal components or if you wish to install system devices.

2.1.1 Removing the cover

1. Use a Phillips screwdriver to remove the screw on each front end of the top cover.

Thumbscrews

2. Loosen the two thumbscrews on the rear panel to release the top cover from the chassis.
2. Firmly hold the cover and slide it toward the rear panel for about half an inch until it is disengaged from the chassis.

1/2 inch distance

3. Lift the cover from the chassis.
Chapter 2: Hardware setup
2.1.2 Installing the cover
1. Position the cover on top of the chassis with the thumbscrews on the rear, and leaving a gap of about half an inch from the front panel.

Side markings

2. Make sure that the side markings on the cover (two on each side) are aligned to the grooves on the chassis.

Side lock groove

3. Slide the cover toward the front until it snaps in place. 4. Tighten the thumbscrews on the rear to secure the cover.
2.2 Central Processing Unit (CPU)
The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket and designed for the Intel Pentium 4 processor.
If your barebone system comes with the CPU heatsink installed, remove the pre-installed CPU heatsink before installing a CPU as described in section 2.2.1 Removing the CPU heatsink.
2.2.1 Removing the CPU heatsink
To remove the CPU heatsink: 1. Use a Phillips (cross) screwdriver to loosen the four screws that secure the heatsink until it is released. 2. Carefully lift the heatsink from the motherboard.
You dont need to detach the screws from the heatsink.

2.2.2 Installing a CPU

To install a CPU: 1. Locate the CPU socket on the motherboard and take note of the Pin 1 on the socket.
Make sure that the socket lever is pushed back all the way, otherwise the CPU does not fit in completely.

2. Flip up the socket lever and push it all the way to the other side.

Socket Lever

90 - 100
3. Position the CPU above the socket as shown. 4. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU!

Gold Mark

5. Carefully push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. 6. Apply the thermal interface material (thermal grease) to the top of the CPU. This thermal grease should come with the CPU package.
2.2.3 Installing the CPU heatsink
To install the CPU heatsink: 1. Carefully place the heatsink on top of the installed CPU.
2. Hold down the heatsink lightly and twist each of the four screws with a Philips (cross) screwdriver just enough to attach the heatsink to the motherboard. 3. When the four screws are attached, tighten them one by one to completely secure the heatsink.

2.3 System memory

The motherboard comes with four Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 4GB system memory using 184-pin unbuffered ECC or non-ECC PC3200/ PC2700/PC2100 DDR DIMMs. The following figure shows the location of the DDR DIMM sockets.

DIMM_A1

DIMM_A2 DIMM_B1

DIMM_B2

104 Pins

PSCH-LR

80 Pins
PSCH-LR 184-Pin DDR DIMM Sockets
2.3.1 Memory configurations
1. Installing DDR DIMMs other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in Table 1. 2. In dual-channel configurations, install only identical (the same type and size) DDR DIMM pairs for each channel. 3. Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. 4. Make sure that the memory frequency matches the CPU FSB (Front Side Bus). Refer to Table 2. 5. DIMMs installed into any three sockets will function in singlechannel mode. 6. When all four sockets are populated with 1GB DIMMs (total 4GB), the system may detect only about 3.6GB (less than 4GB) due to ICH resource allocation.

4. Secure the tray with a screw.
5. Connect the 40-pin IDE cable and a 4-pin power plug to their respective connectors on the back of the drive.
40-pin IDE cable 4-pin power plug
The other end of the IDE cable is pre-connected to the primary IDE connector on the motherboard.
6. Repeat steps 1 to 5 to install a second IDE drive. 7. When finished installing devices, Cable clamp join the power and signal cables together with the cable clamp to prevent interference to the rotating fan blades.
Ensure that all cables are held together with the cable clamp, specially those near the system fans. Loose cables may get caught with the fan blades causing fan failure!
2.4.2 Installing a Serial ATA hard disk drive
To install an SATA HDD: 1. Follow steps 1 to 4 in section 2.4.1 Installing an IDE hard disk drive. 2. Connect the 7-pin SATA cable to the SATA connector on the back of the drive. Connect the other end to an SATA connector on the motherboard.
SATA connector 4-pin device power cable 7-pin SATA cable
3. Connect the HDD power cable. For Serial ATA HDDs with a 4-pin power connector, connect a 4-pin (female) device plug from the power supply to the 4-pin (male) power connector on the back of the drive as shown above. For Serial ATA HDDs without a 4-pin power connector, use an SATA power cable with a 4-pin/15pin plugs. Connect a 4-pin (female) device plug from the 15-pin power supply to the 4-pin (male) plug of the SATA power cable. Connect the 15-pin SATA power plug to the power connector on 4-pin (male) the back of the drive.

SATA power cable

4. Repeat steps 1 to 3 to install a second SATA drive.
Ensure that all cables are held together with the cable clamp, specially those near the system fans. Loose cables may get caught with the fan blades causing fan failure! See step 7 of section 2.4.1 Installing an IDE hard disk drive.
2.4.3 Installing a hot-swap SATA HDD (AA2 model)
To install a hot-swap SATA HDD: 1. Release a drive tray by pushing the spring lock to the right, then pulling the tray lever outward. The drive tray ejects slightly after you pull out the lever.

These IRQs are usually available for ISA or PCI devices.
IRQ assignments for this motherboard
INTA# PCIX slot 1 PCIX slot 2 Onboard LAN controller Onboard VGA controller PIRQB# PIRQA# PXIRQ0# PXIRQ1# INTB# PXIRQ1# PXIRQ2# INTC# PXIRQ2# PXIRQ3# INTD# PXIRQ3# PXIRQ0#
When using PCI cards on shared slots, ensure that the drivers support Share IRQ or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable.

2.6 Cable connections

The bundled system cables are pre-connected before shipment. You do not need to disconnect these cables unless you will remove preinstalled components to install additional devices. Refer to this section when reconnecting cables to ensure correct cable connections.
Pre-connected system cables
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Rear fan connector (FAN5) 4-pin 12V power connector (from power supply to motherboard) 20-pin ATX power connector (from power supply to motherboard) System fan connector (FAN6) System fan connectors (FAN2, FAN3, FAN4) Device fan connector (FAN1) Panel connector for front panel LEDs Front panel USB 2.0 (2 ports) Primary IDE (from motherboard to HDDs) Secondary IDE (from motherboard to optical drive) 4-pin power connector (from power supply to optical drive)

2.7 Removable components

You may need to remove previously installed system components when installing or removing system devices, or when you need to replace defective components. This section tells how to remove the following components: 1. System fans 2. Device fan 3. Rear fan 4. Power supply module 5. Optical drive 6. Motherboard

2.7.1 System fans

To uninstall the system fans: 1. Disconnect the system fan cables from the connectors labeled FAN2, FAN3, FAN4, and FAN6 on the motherboard. 2. Remove the four screws that secure a 40mm x 56mm system fan. 3. Repeat step 2 to uninstall the other 40mm x 56mm system fan.
FAN2 FAN3 FAN4 FAN4 FAN6 FAN3 FAN2

FAN6 FAN1

2.7.2 Device fan
To uninstall the device fan: 1. Disconnect the system fan cable from the connector labeled FAN1 on the motherboard. 2. Remove the four screws that secure the 40mm x 28mm device fan.

2.7.3 Rear fan

To uninstall the rear fan: 1. Disconnect the system fan cable from the connector labeled FAN5 on the motherboard. 2. From the rear panel, remove the four screws that secure the 40mm x 28mm rear fan. ASUS AP140R-E1 1U barebone server
2.7.4 Power supply module
To uninstall the power supply module: 1. Disconnect all the power cables connected to the motherboard and system devices.
2. Use a Phillips (cross) screwdriver to remove the screw the secures the front end of the power supply.
3. From the rear panel, remove the two screws the secure the rear end of the power supply.

4. Slide the power supply forward for about half an inch, then carefully lift it out from the chassis.

2.7.5 Optical drive

To uninstall the optical drive: 1. Please use a pin-ejector (paper clipper may be used) for tray-out. (or you can open the tray by pushing the open botton)
When changing ODD, the black ODD front plastic housing is already removed. User can uninstall/install ODD after remove the tray bezel.
2. Then remove the tray bezel demonstrated in the photo.
3. Disconnect the power and signal cabled connected to the rear of the ODD.
4. Use a Philips (cross) screwdriver to remove the two screws that secure the metal bracket on the side of the ODD. 5. Remove the bracket to release the drive.
To install an optical drive: 1. Please follow previous Step 1 instructions to tray-out and to remove the ODD bezel.
2. Then put the ODD inside the server and insert ODD into the ODD bay.
The purpose of the metal bracket is to secure the ODD us securely in place.
Drive holes to match the pegs on the metal bracket
Drive metal bracket Bracket pegs
Holes to match the standoffs Standoffs to match the holes on the metal bracket
3. Secure the bracket with two screws and re-connect the power and signal cables in place. Put back the tray bezel to finish ODD installation.

2.7.6 Motherboard

To uninstall the motherboard: 1. Disconnect all the power and signal cables connected to the motherboard. Refer to section 2.6 Cable connections for the location of the cables. 2. Uninstall all the devices from the motherboard including the CPU and heatsink, riser card brackets, and DDR DIMMs. Refer to the corresponding sections for instructions on removing these components. 3. Use a Phillips (cross) screwdriver to remove the ten (10) screws that secure the motherboard to the base of the chassis. The locations of the screw holes are indicated in the following figure.
4. Carefully lift the motherboard out of the chassis.
To install a motherboard, position the I/O connectors toward the rear panel then carefully fit the motherboard to the base of the chassis. Secure the motherboard with ten screws on the holes indicated in the above figure.

Chapter 3

This chapter describes the optional installation procedures for the barebone server.

Installation options

3.1 Rackmount rail kit items

KBPWR1

No KB Wake-Up (Default) KB Wake-Up
PSCH-LR Keyboard Power Setting
2. Gigabit LAN1 controller setting (3-pin LAN_EN1) This jumper allows you to enable or disable the Intel 82541GI Gigabit LAN controller. Setting this jumper to pins 2-3 disables the Gigabit LAN port (RJ-45) on the rear panel that corresponds to this controller.

LAN_EN1

Enable (Default) Disable

PSCH-LR LAN_EN1 Setting

3. Gigabit LAN2 controller setting (3-pin LAN_EN2) This jumper allows you to enable or disable the Intel 82547GI Gigabit LAN controller. Setting this jumper to pins 2-3 disables the Gigabit LAN port (RJ-45) on the rear panel that corresponds to this controller.

LAN_EN2

Enable (Default)

Disable

PSCH-LR LAN_EN2 Setting
4. Onboard VGA setting (3-pin VGA_EN1) This jumper allows you to enable or disable the onboard VGA. Set this jumper to disabled (pins 2-3) if you wish to install a VGA card.
PSCH-LR VGA Jumper Setting
5. Recovery setting (3-pin RECOVERY1) This jumper allows you to update/recover the BIOS quickly. To update the BIOS: 1. Prepare a floppy disk that contains the latest BIOS for the motherboard (xxxx-xxx.BIN) and the AWDFLASH.EXE utility. 2. Set the jumper to pins 2-3. 3. Insert the floppy disk then turn on the system to update the BIOS. 4. Shut down the system. 5. Set the jumper back to pins 1-2. 6. Turn on the system.

RECOVERY1

Recovery

Normal (Default)

PSCH-LR RECOVERY Setting
6. Clear RTC RAM (3-pin CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by the onboard button cell battery. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5~10 seconds, then move the cap back to pins 1-2. 4. Re-install the onboard battery. 5. Plug the power cord and turn ON the computer. 6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.

CLRTC1

Clear CMOS

PSCH-LR Clear RTC RAM

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure!

4.3 Connectors

5.1.1 Creating a bootable floppy disk
1. Do either one of the following to create a bootable floppy disk.

DOS environment

Insert a 1.44 MB floppy disk into the drive. At the DOS prompt, type: format a: /s, then press the <Enter> key

Windows XP environment

a. Insert a new 1.44 MB floppy disk in the floppy disk drive. b. From the Windows desktop, click Start > My Computer. c. In the My Computer window, click the 3 1/2 Floppy icon. d. From the Menu bar, click File > Format. e. Select Create an MS-DOS Startup Disk in the Format Options field, then click Start. 2. Copy the original (or the latest) motherboard BIOS to the bootable floppy disk.

Chapter 5: BIOS setup

5.1.2 Updating the BIOS
The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility (AWDFLASH.EXE). Follow these instructions to update the BIOS using this utility. 1. Download the latest BIOS file from the ASUS web site. Rename the file to *.BIN and save it to a floppy disk. 2. Insert the disk that contains the new BIOS file into the floppy drive.
Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file.
3. Reboot the computer. 4. Press <Alt> + <F2> during POST to display the following screen.

1001-015.BIN

5. AWDFLASH checks the new BIOS file from the floppy disk. 6. After verification, AWDFLASH flashes the new BIOS file. Do not shut down the computer during the flash process.
7. After the new BIOS file is copied, the computer returns to POST. ASUS AP140R-E1 1U barebone server 5-3

5.2 BIOS Setup program

This motherboard includes a Flash ROM that you can update using the provided utility described in section 5.1 Managing and updating your BIOS. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to Run Setup. This section explains how to configure your system using this utility. Even if you are not prompted to use the Setup program, you may want to change the configuration of your computer in the future. For example, you may want to enable the security password feature or make changes to the power management settings. This requires you to reconfigure your system using the BIOS Setup program so that the computer can recognize these changes and record them in the CMOS RAM of the Flash ROM. The Flash ROM on the motherboard stores the Setup utility. When you start up the computer, the system provides you with the opportunity to run this program. Press <Delete> during the Power-On Self Test (POST) to enter the Setup utility, otherwise, POST continues with its test routines. If you wish to enter Setup after POST, restart the system by pressing <Ctrl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You can also restart by turning the system off and then back on. Do this last option only if the first two failed. The Setup program is designed to make it as easy to use as possible. It is a menu-driven program, which means you can scroll through the various sub-menus and make your selections among the predetermined choices.

5.5.2 Hardware Monitor

This menu shows the hardware monitoring status. Select an item then press Enter to display a pop-up menu with the configuration options.
Hardware Monitor Voltage Monitor M/B Temperature CPU Temperature Current FAN1 Speed Current FAN2 Speed Current FAN3 Speed Current FAN4 Speed Current FAN5 Speed Current FAN6 Speed 49oC/109oF 48oC/118oF 0 RPM 0 RPM 0 RPM 0 RPM 0 RPM 0 RPM
Select Menu Item Specific Help Press Enter to view.

Voltage Monitor

Voltage Monitor CPU VCORE VOLTAGE +3.3V VOLTAGE +12V VOLTAGE MCH VCORE +1.5V VOLTAGE DDR +2.5V VOLTAGE 5VCC 5VSB VBAT VOLTAGE 1.45 3.34 11.91 1.50 2.57 4.94 4.72 3.15 V V V V V V V V Select Menu Item Specific Help
CPU VCORE Voltage, +3.3V Voltage, +12V Voltage, MCH VCORE +1.5V Voltage, DDR +2.5V Voltage, 5VCC Voltage, +5VSB Voltage, VBAT Voltage
Auto-detected voltages through the onboard voltage regulators.

5.6 Boot menu

The Boot menu items allow you to change the system boot settings. Select an item then press Enter to display a sub-menu with additional items, or show a pop-up menu with the configuration options.
Boot Device Priority Hard Disk Boot Priority Removable Device Priority Boot Settings Configuration Security
5.6.1 Boot Device Priority
Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [Removable] [CDROM] [Hard Disk] Select Menu Item Specific Help Select your Boot Device Priority.
1st Boot Device [Removable] 2nd Boot Device [CDROM] 3rd Boot Device [Hard Disk]
These items allow you to select your boot device priority. Configuration options: [Removable] [Hard Disk] [CDROM] [Legacy LAN] [Disabled] 5-30 Chapter 5: BIOS setup
5.6.2 Hard Disk Boot Priority
Hard Disk Boot Priority 1. 2. 3. 4. 1st Master: 1st Slave : 2nd Master: Bootable Add-in Cards Select Menu Item Specific Help Use <up> or <down> arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.
1st Master 1st Slave 2nd Master Bootable Add-in Cards
These items allow you to set the priority of hard disk drives (if you installed more than one) from which you wish to boot.
5.6.3 Removable Device Priority
Removable Device Priority 1. Floppy Disks Select Menu Item Specific Help Use <up> or <down> arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.
5.6.4 Boot Settings Configuration

Boot Settings Configuration Boot Other Device Quick Power On Self Test Halt On Case Open Warning Boot Up Floppy Seek Boot Up NumLock Status Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) [Enabled] [Enabled] [All, But Diskette] [Enabled] [Enabled] [On] [Disabled] Select Menu Item Specific Help Select your Boot Device Priority.
Boot Other Device [Enabled]
Allows you to enable or disable selection of other boot device. Configuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a second, third, and fourth time. Configuration options: [Disabled] [Enabled]
Halt On [All, But diskette]
Sets the system to halt on errors according to the system functions specified in each option. Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All , But Diskette] [All, But Disk/Key]
Case Open Warning [Disabled]
Allows you to enable or disable the case open status feature. Setting to [Enabled] clear the case open status. Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]
Boot Up NumLock Status [On]
Allows you to select the power-on state for the NumLock. Configuration options: [On] [Off]
Typematic Rate Setting [Disabled]
Allows you to enable or disable the keyboard typematic rate setting. Set to [Enabled] to configure the Type Rate and Type Delay items. Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay become configurable only when the item Typematic Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before key strokes begin to repeat. Configuration options: [250] [500] [750] [1000]

5.6.5 Security

Security Supervisor Password User Password Password Check Clear Clear [Setup] Select Menu Item Specific Help Supervisor password control full access.
Supervisor Password [Clear] User Password [Clear]
These fields allow you to set passwords. To set a password: 1. Highlight an item then press <Enter>. 2. Type in a password using up to eight (8) alphanumeric characters, then press <Enter>. 3. When prompted, confirm the password by typing the exact characters again, then press <Enter>. The password field setting is changed to [Set]. To clear the password: 1. Highlight the password field, and press <Enter> twice. The following message appears: PASSWORD DISABLED!!! Press any key to continue. 2. Press any key to return to the menu. A note about passwords The Supervisor password is required to enter the BIOS Setup program preventing unauthorized access. The User password is required to boot the system preventing unauthorized use. Forgot the password? If you forget your password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. The RAM data containing the password information is powered by the onboard button cell battery. If you need to erase the CMOS RAM, refer to section 4.2 Jumpers for instructions.

If you want to boot the system from a hard disk drive included in a created RAID set, copy first the RAID driver from the support CD to a floppy disk before you install an operating system to the selected hard disk drive. Refer to section 2. RAID driver installation for details.
6.1.2 Installing hard disk drives
The motherboard supports Serial ATA hard disk drives for RAID set configuration. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for RAID configuration: 1. Install the SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector at the back of each drive and to the SATA connector on the motherboard. 3. Connect a SATA power cable to the power connector on each drive. 6-2 Chapter 6: Driver installation
6.1.3 Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID set(s). To do this: 1. 2. 3. 4. 5. Enter the BIOS Setup during POST. Go to the Advanced Menu, select Onboard device, then press <Enter>. Select the item SATA Configuration, then press <Enter> to display the configuration options. Select RAID from the SATA Mode options, then press <Enter>. Save your changes, then exit the BIOS Setup.
Refer to the BIOS setup for details on configuring the BIOS.
6.1.4 RAID configuration utility
You can create a RAID set using the utility embedded in the RAID controller. For example, you can use the Adaptec RAID Configuration Utility if you installed SATA hard disk drives on the SATA connectors supported by the Intel 6300ESB Southbridge. The Adaptec RAID Configuration Utility allows you to create RAID 0 and RAID 1 set using the SATA hard disk drives connected to the SATA connectors supported by the motherboard Southbridge chip. To enter the Adaptec RAID Configuration Utility: 1. 2. Turn on the system after installing all the SATA hard disk drives. During POST, the Adaptec HostRAID technology automatically detects the installed SATA hard disk drives and displays any existing RAID set(s). Press <Ctrl> <A> to enter the utility.

6.1.4.6 Rebuilding a RAID set
The utility displays the condition of the RAID set during the POST. When a RAID set is degraded, you can use the utility to rebuild it.
Check the physical connections of the SATA hard disk drives before you rebuild a degraded RAID set. Check the system and motherboard user guide for additional information.

To rebuild a RAID array:

Enter the Adaptec RAID Configuration Utility following the instructions in the section Creating a RAID 0 (Stripe). Select Array Configuration Utility from the initial menu, then press <Enter>.
From the main menu, highlight Manage Arrays, then press <Enter> to display the installed RAID sets. Highlight the degraded RAID set, then press <Enter> to display the array properties. The Array Status shows DEGRADED.
Press <Ctrl> + <R> to rebuild the RAID set. The Array Status shows the rebuilding progress.
To rebuild the RAID set using the RAID management application in the operating system, press <Esc> while the RAID set is being rebuilt to exit the application. A message pops up for confirmation. Press <Y> to exit.
Creating a RAID driver disk
You may have to use another system to create the RAID driver disk from the system/motherboard support CD or from the Internet.
6.1.5.1 Windows 2000/2003 Server A floppy disk with the RAID driver is required when installing Windows 2000/2003 Server operating system on a hard disk drive that is assigned to an array. To create a RAID driver disk from Windows environment: 1. 2. Place the system or motherboard support CD in the optical drive. When the Drivers menu appears, select the RAID driver disk you want to create. OR Browse the contents of the support CD to locate the driver disk utility. The Intel 6300ESB RAID Driver Disk is located in: \Drivers\6300ESB\Windows 3. 4. 5. Insert a formatted high-density floppy disk to the floppy disk drive. Follow screen instructions to complete the process. After creating a RAID driver disk, eject the floppy disk, then write-protect it to prevent computer virus infection.
6.1.5.2 Red Hat Linux 9.0 To create an Intel 6300ESB Red Hat Linux 9.0 driver disk: 1. 2. Insert a blank formatted high-density floppy disk to the floppy disk drive. Decompress the file RH9.0+release+build+16.gz into the floppy disk from the following path in the support CD: \Drivers\6300ESB\Linux 3. Eject the floppy disk.

6.1.6.1

212,85 Sk 245,10 Sk 438,60 Sk 490,20 Sk 16,77 Sk 17,42 Sk 18,06 Sk 19,35 Sk 21,29 Sk 33,54 Sk 36,12 Sk 37,41 Sk 37,41 Sk 38,70 Sk 50,31 Sk 54,18 Sk 59,34 Sk 64,50 Sk 65,79 Sk 96,75 Sk 187,05 Sk 212,85 Sk 218,01 Sk 374,10 Sk 580,50 Sk 632,10 Sk 670,80 Sk 772,71 Sk 860,43 Sk 980,40 Sk 1 019,10 Sk 1 406,10 Sk 74,82 Sk 89,01 Sk 101,91 Sk 107,07 Sk 114,81 Sk 141,90 Sk 141,90 Sk 166,41 Sk 212,85 Sk 238,65 Sk 238,65 Sk 278,64 Sk 361,20 Sk 380,55 Sk 541,80 Sk 322,50 Sk 335,40 Sk 438,60 Sk 490,20 Sk 838,50 Sk 643,71 Sk 1 831,80 Sk
Chladie > Pre CPU > Multifunkn ASUS STAR ICE blue Thermaltake Golf 325 P0001 Thermaltake CL-P0257 Blue Orb Thermaltake Beetle pre CPU CL-P0086 Thermaltake Big Water pre CPU W005 ZALMAN CNPS7000B-ALCU ZALMAN CNPS7000B-ALCU LED ZALMAN CNPS7700-ALCU ZALMAN CNPS7000B-CU ZALMAN CNPS7000B-CU LED ZALMAN CNPS7700-CU ZALMAN CNPS9500 LED ZALMAN RESERATOR 1 Plus Asus P4 AM7S/ID1 Crux Asus P4 MH7/ID1 Neptune Asus P4 MM7S/ID1 Crux SPEEZE LionStream V P4 3.2GHz SPEEZE CopperSnake III Thermaltake Spark 7 P4 A1545 Asus K8M2-7MB5S Crux Asus K8P1-7MB5S X Mars SPEEZE Dolphin Reef III Thermaltake Golden Orb II CL-P0220 Thermaltake Silent 939 CL-P0200 Thermaltake Venus 12 A1744 Thermaltake Venus Silent Boost K8 A1838 SPEEZE BuzzardKite 1 SPEEZE HawkStream IV SPEEZE CooperEagle II XP 3400+ SPEEZE Atlantic Wave vodn chladenie SPIRE WhisperRock IV XP 3400+ Thermaltake Silent&Smart Volcano 9 pre CPU A1365 Thermaltake Extreme Volcano 12 A1745 Thermaltake Volcano Silent Boost A1889-01 Asus P5M2-8SB3W Asus P5P2-8MB2W VR Guard SPEEZE LeopardStreamV P4 3400+ SPEEZE Spider LGA 775 3.6GHz SPIRE QuadroFlow V Thermaltake Jungle 525 P0154 Thermaltake Silent 775 CL-P0092 Thermaltake Silent Tower pre CPU CL-P0025 Thermaltake Jungle 512 P0037 Chladie > Pre komponenty > Do skrinky SPEEZE Case cooler Exhauster SPEEZE pre HDD front panel Spire Alu Case Blower 8cm Thermaltake Standart Case Fan 80mm A1098 Thermaltake Smart Fan II A1357 Thermaltake Smart Fan II A2178 Thermaltake Smart Fan II A2029 Thermaltake Smart Fan II CoolMod A1506 Thermaltake XBlower Fan Kit A1869 ZALMAN ZM-F1 ZALMAN ZM-F2 SPEEZE pre zdroj 8x8 SLEEVE SPEEZE chladic pre zdroj 8x8 purple 36 166,41 Sk 283,80 Sk 270,90 Sk 256,71 Sk 334,11 Sk 361,20 Sk 424,41 Sk 451,50 Sk 748,20 Sk 180,60 Sk 193,50 Sk 89,01 Sk 109,65 Sk 064,25 Sk 696,60 Sk 1 135,20 Sk 1 277,10 Sk 3 405,60 Sk 1 096,50 Sk 1 148,10 Sk 1 393,20 Sk 1 406,10 Sk 1 470,60 Sk 1 715,70 Sk 2 102,70 Sk 9 662,10 Sk 187,05 Sk 212,85 Sk 238,65 Sk 230,91 Sk 580,50 Sk 669,51 Sk 316,05 Sk 896,55 Sk 425,70 Sk 851,40 Sk 915,90 Sk 945,57 Sk 954,60 Sk 256,71 Sk 283,80 Sk 632,10 Sk 4 128,00 Sk 374,10 Sk 527,61 Sk 915,90 Sk 941,70 Sk 412,80 Sk 909,45 Sk 412,80 Sk 890,10 Sk 503,10 Sk 632,10 Sk 890,10 Sk 973,95 Sk 1 030,71 Sk
SPEEZE pre zdroj 8x8 BALL SPEEZE pre zdroj 8x8 with TEMP control MANHATTAN SPEED CONTROL PANEL black MANHATTAN SPEED CONTROL PANEL silver SPEEZE PCI Speed controller EE-SC-PCI Superior Panel black Superior Panel silver Thermaltake Hardcano 10 pre HDD A1658 Thermaltake Fan Kit A2003 - 4 ventiltory Thermaltake Hardcano 12 pre HDD A1845 Thermaltake Hardcano 13 A2259 ZALMAN ZM-MFC1 SPEEZE RAM Cool EE-HS01 SPEEZE RAM Cool II CF301-NBL Thermaltake Aluminium Heat Spreader A1991 Thermaltake Copper Memory Heat Spreader A1989 Thermaltake Copper RAM Heatsink A1978 Thermaltake Heat Spreader A1414 Thermaltake True Light Heat Spreader CL-C001 SPEEZE pasta silver 0,5g SPEEZE pasta biela 2g SPEEZE pasta silver 10g Thermaltake Thermal Grease 1 A2014 Thermaltake Thermal Grease 2 A2150 SPEEZE PacificBreeze LED FAN Thermaltake Taichi M Notebook Cool A2326 MANHATTAN cooler pre HDD 1xFAN MANHATTAN cooler pre HDD 2xFAN SPEEZE pre HDD 2xFAN ZALMAN ZM-2HC2 SPEEZE Chip Cooler pre VGA SPEEZE pre zdroj VGA a chipset 3A07S2 SPEEZE pre VGA chipset JAC07 SPEEZE Chipset bundle SET SPEEZE CoolForce VGA Card cooler Thermaltake Crystal Orb A1178 Thermaltake Extreme Spirit A1899 Thermaltake Extreme Giant III A1919 Thermaltake Schooner pre VGA CL-G0009 ZALMAN FB123 ZALMAN ZM-RHS1 ZALMAN ZM-OP1 ZALMAN VF700-ALCU ZALMAN ZM80C-HP ZALMAN VF700-ALCU LED USB mini ventiltor pre notebooky Thermaltake A2036 XJog Fan/Light USB Thermaltake A2044 XJog Fan/Light/Hub USB Thermaltake Mobile Fan II A2019 Chladie > Prsluenstvo Overclockers cooler kit blue Thermaltake Flow indiktor prietoku W0012 Thermaltake T-Type indiktor teploty W0033 Thermaltake Water Level indiktor hladiny W0009 ZALMAN ZM-EC1 Chladie > Ventiltory, mrieky LED FAN 8x8cm blue ROUND FAN GRILL red

istiace obrsky na povrchy WET/DRY 12+12 istiace obrsky pre PC antistatick 100ks PC CLEAN CD REPAIR istiace obrsky na povrchy WET/DRY 50+50 Doplnky, PC tunning > Internetov karty ROZBAL TO - predplatena internetova karta NaEX - predplaten Internet karta DIAL UP Doplnky, PC tunning > Irda, BT > IRDA LOGITECH Harmony 655 diakov ovldanie LOGITECH Harmony 675 diakov ovldanie LOGITECH Harmony 688 diakov ovldanie LOGITECH Harmony 885 diakov ovldanie Doplnky, PC tunning > PC TUNING > El strip EL Strip blue 150cm EL Strip red 150cm EL Wire blue 150cm EL Wire red 150cm Laser LED red Laser LED green Laser LED blue Laser LED UV Laser LED white SUN TUBE 10cm UV SUN TUBE 30cm blue SUN TUBE 30cm green SUN TUBE 30cm purple SUN TUBE 30cm red SUN TUBE 30cm UV SUN TUBE 30cm white SUN TUBE 30cm yellow NEONBAR KIT 30cm blue NEONBAR KIT 10cm blue NEONBAR KIT 30cm green NEONBAR KIT 30cm purple NEONBAR KIT 30cm red NEONBAR KIT 30cm UV NEONBAR KIT 30cm white NEONBAR KIT 30cm yellow Bubble Light blue Bubble Light green Bubble Light multicolor Bubble Light red Meteor Light blue Meteor Light green Meteor Light red Liquid Neon Spiral Pattern blue Liquid Neon Spirall Pattern red Liquid Neon Spiral Pattern red-green-blue PCI RACK Kryt na kble BIELY 2m Kryt na kble IERNY 2m MULTI-FUNCTION CONTROLLER TP101 PCI Chameleon 5.25" PANEL + 4 LED LightBus 5.25" PANEL Thermaltake 5.25" PANEL XRAY A2021 Thermaltake 5.25" O3 A2324 Thermaltake Xpeaker A1875 Thermaltake Circle Fire A1994
167,70 Sk 174,15 Sk 199,95 Sk 206,40 Sk 477,30 Sk 554,70 Sk 2 902,50 Sk 3 599,10 Sk 4 115,10 Sk 7 004,70 Sk 218,01 Sk 218,01 Sk 218,01 Sk 218,01 Sk 92,88 Sk 94,17 Sk 101,91 Sk 105,78 Sk 105,78 Sk 109,65 Sk 114,81 Sk 114,81 Sk 114,81 Sk 114,81 Sk 114,81 Sk 114,81 Sk 114,81 Sk 166,41 Sk 187,05 Sk 199,95 Sk 199,95 Sk 199,95 Sk 199,95 Sk 199,95 Sk 199,95 Sk 218,01 Sk 218,01 Sk 218,01 Sk 218,01 Sk 232,20 Sk 232,20 Sk 238,65 Sk 264,45 Sk 264,45 Sk 321,21 Sk 256,71 Sk 296,70 Sk 296,70 Sk 1 277,10 Sk 554,70 Sk 772,71 Sk 425,70 Sk 812,70 Sk 928,80 Sk 1 431,90 Sk
Thermaltake Media Lab A2328 silver Thermaltake Media Lab A2331 black SPEEZE Soundpad EE-SND PAD01 Strobe Light blue Strobe Light green Strobe Light red Dancing Light USB Light notebook SILVER USB Light CLIP USB Light X-JOG white Doplnky, PC tunning > STOJANY Driak pre reproduktory do 5kg na stenu, black Driak vertiklny na LCD/TV do 15kg LCD1 Stojan na LCD do 15kg Stojany na reproduktory Home Cinema silver 4ks Stojan na LCD do 15kg 22cm rameno Stojan na LCD do 15kg s klbom Stojan na TV, FAX do 25kg black Stojan na TV, FAX do 25kg silver TV-SE Driak vertiklny na LCD/TV do 15kg LCD2 Stojan na TV, FAX do 25kg silver TV-M Stojany na reproduktory black 2ks Stojany na reproduktory silver 2ks Stropn driak na TV do 40kg platina Driak vertiklny na plazmu do 70kg SF1 Grafick karty > ATI > Radeon 7000 MANLI Radeon 7000 32MB SDRAM TD ATI Radeon 7000 32MB TV ATI Radeon 7000 64MB TV ATI Radeon 7000 64MB DDRAM TV PCI ASUS Radeon 9250 128MB TV DVI MSI ATI Radeon 9250 128MB TV DVI ATI Radeon 9250 128MB TV-out 64bit ATI Radeon 9250 128MB TD 64bit ATI Radeon 9250 128MB TD 128bit ATI Radeon 9250 256MB TD 128bit ASUS Radeon 9550 128MB TV DVI MSI ATI Radeon 9550SE 128MB T MSI ATI Radeon 9550 256MB TD ATI Radeon 9550 128MB 128bit ATI Radeon 9550 256MB 128bit TV DVI ATI Radeon 9550 128MB 128bit VIVO ATI Radeon 9550 256MB 128bit TV DVI VIVO MANLI ATI Radeon 9600 128MB TV DVI MANLI ATI Radeon 9600 256MB TV-out DVI-I MSI ATI Radeon 9600XT 128MB TD ATI Radeon 9600 128MB ATLANTIS TV-out DVI ATI Radeon 9600PRO 128MB TV-out DVI ATI Radeon 9600 256MB TV DVI ATI Radeon 9600XT 128MB TV DVI ATI Radeon 9600XT 256MB DDR2 TV DVI VIVO MSI ATI RX1300 PRO 256MB TD PCIE ATI Radeon X1300 128MB PCX TV DVI ATI Radeon X1300 PRO 256MB DDR2 PCX TD ATI Radeon X1600PRO 256MB DDR2 PCX TD ATI Radeon X1600XT 256MB DDR3 PCX TD ASUS ATI AX300SE-X 128MB TD PCX MSI ATI RX300HM 128MB TD PCX

2 244,60 Sk 2 373,60 Sk 2 721,90 Sk 2 373,60 Sk 2 812,20 Sk 3 070,20 Sk 3 289,50 Sk 3 921,60 Sk 4 218,30 Sk 4 579,50 Sk 4 695,60 Sk 5 082,60 Sk 5 508,30 Sk 5 637,30 Sk 6 824,10 Sk 7 688,40 Sk 7 198,20 Sk 7 985,10 Sk 8 023,80 Sk 13 222,50 Sk 14 641,50 Sk 11 558,40 Sk 13 609,50 Sk 1 470,60 Sk 1 496,40 Sk 1 470,60 Sk 1 535,10 Sk 2 244,60 Sk 1 728,60 Sk 2 578,71 Sk 1 354,50 Sk 1 780,20 Sk 3 728,10 Sk 2 038,20 Sk 2 425,20 Sk 1 793,10 Sk 2 038,20 Sk 2 244,60 Sk 2 605,80 Sk 2 244,60 Sk 3 728,10 Sk 4 244,10 Sk 5 263,20 Sk 5 624,40 Sk 3 083,10 Sk 3 405,60 Sk 3 844,20 Sk 4 205,40 Sk 4 747,20 Sk 5 469,60 Sk 5 908,20 Sk 3 586,20 Sk 4 618,20 Sk 4 695,60 Sk 4 747,20 Sk 5 287,71 Sk 5 650,20 Sk
ASUS GeForce FX6800GT 256MB TV2DVI PCI VGA GAINWARD GF7800GTX 256MB PCI-E MSI GeForce NX7800GT VT2D 256MB PCX MSI GeForce NX7800GTX VT2D 256MB PCX Grafick karty > PCI > ATI STLabs ATI RAGE 8MB PCI HDD > 1.8" > 4200rpm 2MB Hitachi Travelstar 1.8" 60GB 4200rpm C4K60 HDD > 2,5" HDD > 4200rpm 2MB Hitachi Travelstar 2.5" 40GB 4200rpm Hitachi Travelstar 2.5" 60GB 4200rpm Hitachi Travelstar 2.5" 80GB 4200rpm SEAGATE Momentus 2.5" 40GB 4200 2MB ST9402112A TOSHIBA 2.5" 40GB 4200rpm 8MB MK4025GAS TOSHIBA 2.5" 60GB 4200rpm 8M MK6025GAS TOSHIBA 2.5" 80GB 4200 8MB MK8025GAS TOSHIBA 2.5" 100GB 4200rpm 8MB MK1031GAS TOSHIBA 2.5" 120GB 4200rpm TOSHIBA 2.5" 80GB 5400rpm 16MB MK8026GAX TOSHIBA 2.5" 100GB 5400rpm 16MB MK1032GAX Western Digital SCORPIO 2.5" 40GB 5400rpm 2MB cach Western Digital SCORPIO 2.5" 60GB 5400rpm 2MB cach WesternDigital SCORPIO 2.5" 100G 5400 2MB WD1000UE Hitachi Travelstar 2.5" 40GB 5400rpm 8MB cache Hitachi Travelstar 2.5" 60GB 5400rpm 8MB cache Hitachi Travelstar 2.5" 80GB 5400rpm 8MB Hitachi Travelstar 2.5" 100GB 5400rpm 8MB cache SEAGATE Momentus 2.5" 40GB 5400 8MB SEAGATE Momentus 2.5" 60GB 5400 8MB SEAGATE Momentus 2.5" 80GB 5400 8MB ST98823A SEAGATE Momentus 2.5" 100GB 5400 8MB TOSHIBA 2.5" 40GB 5400rpm 8MB MK4032GAX TOSHIBA 2.5" 60GB 5400rpm 8MB MK6034GAX TOSHIBA 2.5" 80GB 5400rpm 8MB MK8032GAX Western Digital SCORPIO 2.5" 40GB 5400rpm 8MB cach Western Digital SCORPIO 2.5" 60GB 5400rpm 8MB cach WesternDigital SCORPIO 2.5" 100G 5400 8MB WD1000VE Hitachi Travelstar 7K100 2.5" 80GB 7200rpm 8MB Hitachi Travelstar 2.5" 100GB 7200rpm 8MB cache HDD > 3,5" ATA HDD > 7200 rpm 16MB MAXTOR 200GB 7200rpm 16MB DiamondMax10 MAXTOR 250GB 7200rpm 16MB DiamondMax10 6L250R0 MAXTOR 250GB 7200rpm 16MB Maxline III 7L250R0 MAXTOR 300GB 7200rpm 16MB Diamondmax10 6L300R0 MAXTOR 300GB 7200rpm 16MB MaxlineIII 7L300R0 Maxtor DiamondMax11 500GB 7200 16MB 6H500R0 Hitachi 40GB 7200rpm Hitachi 80GB 7200rpm MAXTOR 40GB 7200rpm 2MB 6E040L0 MAXTOR 80GB 7200rpm 2MB 6Y080L0/6L080L0 MAXTOR 120GB 7200rpm 2MB 6Y120L0 SAMSUNG 40GB 7200rpm SAMSUNG 80GB 7200rpm SEAGATE 40GB 7200rpm SEAGATE 80GB 7200rpm 2MB cache SEAGATE 120GB 7200rpm 2MB ST3120022A Western Digital 40GB 7200rpm 2MB WD400BB Western Digital 80GB 7200rpm 2MB WD800BB

10 578,00 Sk 18 601,80 Sk 12 887,10 Sk 19 040,40 Sk 0,00 Sk 632,10 Sk 0,00 Sk 6 308,10 Sk 0,00 Sk 2 876,70 Sk 3 481,71 Sk 4 115,10 Sk 2 941,20 Sk 2 786,40 Sk 3 481,71 Sk 4 205,40 Sk 6 061,71 Sk 8 114,10 Sk 4 837,50 Sk 5 740,50 Sk 2 836,71 Sk 3 508,80 Sk 6 682,20 Sk 3 083,10 Sk 4 024,80 Sk 4 373,10 Sk 6 346,80 Sk 3 134,70 Sk 4 024,80 Sk 4 437,60 Sk 6 319,71 Sk 2 941,20 Sk 3 868,71 Sk 4 631,10 Sk 2 876,70 Sk 3 728,10 Sk 6 835,71 Sk 6 437,10 Sk 6 566,10 Sk 0,00 Sk 3 508,80 Sk 3 805,50 Sk 4 218,30 Sk 4 708,50 Sk 5 405,10 Sk 13 351,50 Sk 1 804,71 Sk 2 025,30 Sk 1 664,10 Sk 2 025,30 Sk 2 696,10 Sk 1 689,90 Sk 2 076,90 Sk 1 933,71 Sk 2 089,80 Sk 2 889,60 Sk 1 741,50 Sk 2 062,71 Sk
Western Digital 120GB 7200rpm WD1200BB Hitachi 160GB 7200rpm 8MB cache Hitachi 250GB 7200rpm 8MB cache Hitachi 400GB 7200rpm 8MB CACHE Hitachi 500GB 7200rpm 8MB CACHE MAXTOR 80GB 7200rpm 8MB 6L080P0 MAXTOR D10 120GB 7200rpm 8MB 6L120P0 MAXTOR 160GB 7200rpm 8MB 6L160P0 MAXTOR 200GB 8MB cache 6L200P0 SAMSUNG 80GB 7200rpm 8MB SAMSUNG 160GB 7200rpm 8MB SAMSUNG 200GB 7200rpm 8MB SEAGATE 120GB 7200rpm 8MB ST3120814A SEAGATE 160GB 7200rpm 8MB ST3160023A SEAGATE 200GB 7200rpm 8MB cache SEAGATE 250GB 7200rpm 8MB cache SEAGATE 400GB 7200rpm 8M ST3400832A Western Digital 40GB 7200rpm 8MB WD400JB Western Digital 80GB 7200rpm 8MB WD800JB Western Digital 120GB 7200rpm 8MB cache WD1200JB Western Digital 160GB 7200rpm 8MB cache WD1600JB Western Digital 200GB 7200rpm 8MB WD2000JB Western Digital 250GB 7200rpm 8MB WD2500JB Western Digital 300GB 7200rpm 8MB WD3000JB HDD > 3.5" SATA HDD > 7200 16MB MAXTOR 200GB SATA 16MB 6L200S0 MAXTOR DiamondMax 10 250GB 16MB SATA2 6V250F0 MAXTOR 250GB 7200rpm 16MB SATA 6L250S0 MAXTOR 250GB 7200rpm SATA MaxLineIII 7L250S0 MAXTOR 300GB 7200rpm SATA DiamondMAX10 6L300S0 MAXTOR DiamondMax10 300GB 16MB SATA2 6V300F0 MAXTOR MaXLine III 250GB 16MB SATA2 7V250F0 MAXTOR 300GB 7200rpm SATA MaxLineIII 7L300S0 MAXTOR MaXLineIII 300GB 16MB SATA2 7V300F0 MAXTOR DiamondMax 11 500GB 16MB SATA2 6H500F0 WesternDigital CaviarSE 400GB 7200 SATA WD4000KD Hitachi 160GB 7200rpm SATA2 Hitachi 250GB 7200rmp 8MB cache SATA 2 Hitachi 400GB 7200rpm SATA Hitachi 500GB 7200rpm SATA2 MAXTOR 80GB 7200rpm 8MB SATA 6L080M0 MAXTOR 80GB 7200rpm SATA2 6V080E0 MAXTOR 120GB 7200rpm 8MB SATA 6Y120M0 MAXTOR 160GB 8MB SATA2 6V160E0 MAXTOR 160GB 7200 8MB SATA 6L160M0 MAXTOR 200GB SATA 8MB CACHE 6L200M0 MAXTOR 200GB 8MB SATA2 6V200E0 SAMSUNG 80GB SATA2 8MB SAMSUNG 160GB SATA2 8MB SAMSUNG 200GB SATA 8MB SEAGATE 80GB 7200rpm SATA SEAGATE 120GB 7200rpm SATA SEAGATE 160GB 7200rpm 8MB cache SATA2 SEAGATE 120GB 7200rpm 8MB cache SATA2 SEAGATE 200GB 7200rpm SATA SEAGATE 200GB 7200rpm 8MB SATA2 ST3200827AS SEAGATE 250GB 7200rpm SATA SEAGATE 250GB 7200rpm 8MB SATA2 ST3250824AS

2 734,80 Sk 3 070,20 Sk 4 011,90 Sk 9 028,71 Sk 12 124,71 Sk 2 167,20 Sk 2 850,90 Sk 2 902,50 Sk 3 315,30 Sk 2 191,71 Sk 3 212,10 Sk 3 521,70 Sk 2 941,20 Sk 3 108,90 Sk 3 547,50 Sk 3 868,71 Sk 9 017,10 Sk 1 986,60 Sk 2 191,71 Sk 2 928,30 Sk 3 160,50 Sk 3 392,70 Sk 3 934,50 Sk 4 771,71 Sk 0,00 Sk 3 610,71 Sk 3 766,80 Sk 3 868,71 Sk 4 255,71 Sk 4 771,71 Sk 4 771,71 Sk 4 876,20 Sk 5 482,50 Sk 5 792,10 Sk 13 801,71 Sk 8 165,70 Sk 3 147,60 Sk 4 669,80 Sk 10 060,71 Sk 12 706,50 Sk 2 191,71 Sk 2 320,71 Sk 3 044,40 Sk 3 121,80 Sk 3 147,60 Sk 3 481,71 Sk 3 610,71 Sk 2 270,40 Sk 3 212,10 Sk 3 663,60 Sk 2 320,71 Sk 3 186,30 Sk 3 276,60 Sk 3 418,50 Sk 3 868,71 Sk 3 947,40 Sk 4 255,71 Sk 4 437,60 Sk
SEAGATE 300GB 7200rpm SATA SEAGATE 400GB 7200rpm 8M SATA ST3120827AS Western Digital 80GB 7200rpm 8MB SATA WD800JD Western Digital 120GB 7200rpm 8MB SATAII WD1200JS Western Digital 120GB 7200rpm 8MB SATA WD1200JD Western Digital 160GB 7200 8MB SATAII WD1600JS Western Digital 200GB 7200rpm 8MB SATAII WD2000JS Western Digital 250GB 7200rpm 8MB SATAII WD2500JS WesternDigital CaviarRE 160G 7200 8M SATA WD1600SD Western Digital 300GB 7200rpm 8MB SATA WD3000JD Western Digital 320GB 7200 8M SATA WD3200JD WesternDigital CaviarRE 320G 7200 8M SATA WD3200SD Hitachi 80GB 7200rpm SATA II MAXTOR 40GB 7200rpm 2MB SATA 6E040T0 HDD > Externe MAXTOR 300GB USB external ONE TOUCH2 MAXTOR 300GB COMBO external E14G300 MAXTOR 300GB COMBO external E14W300 HDD > FDD > Teac FDD TEAC 3.5" 1.44MB black HDD > Prsluenstvo HDD montna sada HDD Silencer Cushion HDD > Rmeky na HDD Apacer Share Steno rmek na HDD Rmek na HDD ATA133 s chladenim Rmek na HDD SATA 1xFAN Rmek MANHATTAN 5.25" USB 2.0 NETIFO 2.5" USB 2.0 HDD RACK NETIFO 3.5" USB 2.0 HDD RACK NETIFO 2.5" IEEE1394 HDD RACK NETIFO 3.5" IEEE1394 HDD RACK NETIFO 3.5" USB 2.0 + IEEE1394 HDD RACK NETIFO 2.5" USB 2.0 + IEEE1394 HDD RACK NETIFO 5.25" USB 2.0 OSD RACK ICY BOX EXT 3.5 SATA IB-128SK ICY BOX EXT 3.5 SATA IB-128SK-B black ICY BOX EXT HDD 3.5 MB-123AK ICY BOX EXT HDD 3.5 USB 2.0 IB-356U-BL ICY BOX EXT HDD 2.5 USB 2.0 Silver IB-250U ICY BOX EXT HDD 3.5 MB-123SK ICY BOX EXT HDD 3.5 MB-123SK-B ICY BOX EXT 3.5 SATA IB-138SK Alu ICY BOX EXT 3.5 SATA IB-138SK-B black Alu ICY BOX EXT HDD 1.8" USB2.0 IB-181U ICY BOX EXT HDD 2.5" USB2.0 IB-281U ICY BOX EXT HDD 3.5 USB 2.0 Silver IB-351U ICY BOX EXT HDD 3.5 MB-122AKGF LCD ICY BOX EXT HDD 3.5 MB-122AKGF-B LCD ICY BOX EXT HDD 3.5 USB 2.0 IB-351U-B-BL ICY BOX EXT HDD 3.5 USB 2.0 Silver IB-351U-BL ICY BOX EXT HDD 3.5 MB-122SKGF-1-B SATA ICY BOX EXT HDD 3.5 USB 2.0 IB-355U-BL ICY BOX EXT HDD 3.5 MB-122SKGF SATA ICY BOX EXT HDD 3.5 USB 2.0 IB-360U-B-BL ICY BOX EXT HDD 3.5 USB 2.0 IB-360U-BL ICY BOX EXT HDD 3.5 USB+SATA 2.0 IB-351StUS ICY BOX EXT HDD 3.5 USB+SATA 2.0 IB-351StUS-B

5 263,20 Sk 9 404,10 Sk 2 231,70 Sk 2 965,71 Sk 3 094,71 Sk 3 352,71 Sk 3 547,50 Sk 3 844,20 Sk 3 868,71 Sk 4 900,71 Sk 5 069,70 Sk 5 545,71 Sk 2 128,50 Sk 1 883,40 Sk 0,00 Sk 8 772,00 Sk 9 739,50 Sk 10 178,10 Sk 0,00 Sk 425,70 Sk 0,00 Sk 50,31 Sk 367,65 Sk 0,00 Sk 2 257,50 Sk 283,80 Sk 606,30 Sk 1 431,90 Sk 593,40 Sk 890,10 Sk 1 225,50 Sk 1 277,10 Sk 1 277,10 Sk 1 354,50 Sk 1 509,30 Sk 890,10 Sk 890,10 Sk 993,30 Sk 1 186,80 Sk 1 264,20 Sk 1 496,40 Sk 1 496,40 Sk 1 496,40 Sk 1 496,40 Sk 1 535,10 Sk 1 535,10 Sk 1 612,50 Sk 1 664,10 Sk 1 664,10 Sk 1 664,10 Sk 1 664,10 Sk 1 728,60 Sk 1 896,30 Sk 1 909,20 Sk 1 909,20 Sk 2 038,20 Sk 2 051,10 Sk 2 051,10 Sk
ICY BOX EXT 5.25 USB 2.0 IB-525U-BL ICY BOX EXT HDD 3.5 USB + IEEE IB-360UE-BL ICY BOX EXT 5.25 USB 2.0 IB-550U-B-BL ICY BOX EXT HDD 3.5 USB + IEEE IB-351UE-B-BL ICY BOX EXT HDD 3.5 USB + Firewire IB-351UE-BL ICY BOX EXT HDD 3.5 USB+IEEE 2.0 IB-360UE-B-BL SPEEZE GIGAPOD 2.5" USB2.0 BOX nen SPEEZE GIGAPOD II 3.5" USB2.0 BOX EE120 SPEEZE GIGAPOD 3.5" USB2.0 BOX SPEEZE GIGAPOD 3.5" USB2.0 + IEEE1394 SPEEZE GIGAPOD 3.5" USB2.0 BOX nen SPEEZE GIGAPOD II 3.5" USB2.0 + IEEE1394 EE121 SPEEZE GIGAPOD 5.25" USB2.0 BOX SPEEZE GIGAPOD 3.5" USB2.0 + IEEE1394 BOX nen STLabs rmek na 2.5" HDD USB 2.0 STLabs rmek na 3.5" HDD SATA STLabs rmek na 3.5" HDD USB 2.0 StLabs rmek na 3.5" HDD USB 2.0 + SATA StLabs rmek na 3.5" HDD 1394 + USB 2.0 Rmek na 3.5" HDD IEEE1394 external Extern box SILVER RIVER na 2.5" HDD USB A2175 Extern box MAX4 na 2.5" HDD USB A2294 Extern box MUSE na 2.5" HDD USB A2291 Extern box MUSE na 3.5" HDD SATA A2319 Extern box MAX4 na 3.5" HDD USB A2295 Extern box MAX4 na 5.25" HDD USB A2296 Extern box MUSE na 3.5" HDD USB A2292 Extern box SILVER RIVER na 5.25" USB A2173 Extern box SILVER RIVER na 3.5" HDD USB A2174 Extern box MUSE na 5.25" HDD USB A2293 HDD > SCSI HDD > Hotswap MAXTOR 73GB 10000rpm SCSI 8D073L0/8J073L0 MAXTOR 73GB SCSI Hotswap 8D073J0/8J073J0 Hern zariadenia > Gamepady GENIUS MaxFire G-08X gameport GENIUS MaxFire G-08XU USB GENIUS MaxFire Mini GamePad USB GENIUS MaxFire G-12PS Genius MaxFire G-12PS wireless LOGITECH Precision Gamepad LOGITECH Dual Action Gamepad LOGITECH Rumblepad2 Vibration Feedback UISB LOGITECH Rumblepad2 Vibration Feedback Wireless Hern zariadenia > Joysticky GENIUS Joystick - F16 USB GENIUS Joystick - F23 USB GENIUS Joystick - F33 digital LOGITECH Joystick Attack3 LOGITECH Joystick Force3D LOGITECH Joystick Cordless Freedom 2.4 LOGITECH Joystick Force3D PRO GENIUS Joystick - F16 V2 Hern zariadenia > Tablety GENIUS Tablet Wizard Pen 4x3 GENIUS Tablet Wizard Pen 5x4 GENIUS Tablet Mouse Pen 5x4 GENIUS Tablet Mouse Pen Sketch 8x6 Hern zariadenia > Volanty

KLAVESNICA -- BENQ A800-839 BLACK+mys M800 CZECH Klvesnica BenQ A800 PS2 ierna + optick my M800 Klvesnice > Prsluenstvo OPIERKA RUKY ku klvesnici Klvesnice > Wireless+my > PS/2 Klvesnica Microsoft Wireless Optical Desktop Klvesnica Benq AM730 wireless s/b+ mys Klvesnica CHICONY wireless 0350T + opt.mouse B/S Klvesnica CHICONY WIRELESS 0420TR sil+opt.mouse, Komunikcia, siete > Bluetooth, IrDA, GSM > Bluetooth GENIUS BLUETOOTH MOBILE HEADSET BT-02E MICRONET BlueTooth USB ADAPTER Class2 SP935A MICRONET BlueTooth USB ADAPTER Class1 SP936 MICRONET GPS BlueTooth Receiver SP3160 MSI BlueTooth 1.1. USB adaptr MSI BlueTooth 2.0 USB adaptr MSI MEGA STAR KEY USB DONGLE 1.2 MSI BlueTooth FREETALK FT100 MSI BlueTooth FREETALK FT200 STLabs BlueTooth Dongle MICRONET GPRS/GSM PCMCIA Card MICRONET GPS USB Receiver SP3150 IC USB IrDA adaptr NETIFO USB IrDA adapter STLabs IrDA USB 2.0 adapter 4Mbps STLabs IrDA USB 2.0 adapter 16Mbps Komunikcia, siete > Hub, Switch, Router ASUS GigaX1005 5-port 10/100 SWITCH ASUS 8-port 10/100 SWITCH ASUS ADSL USB modem AnnexB ASUS 24-port 10/100 SWITCH ASUS 24-port 10/100 SWITCH GX1024I ASUS 24-port 10/100 + 2x1000 Mbps SWITCH GX1024P ASUS 24-port 10/100 + 2x1000 Mbps SWITCH GX2024C IC USB 2.0 HUB 7 port IC iVieW KVM 4PORT switch 157889 Micronet KVM CABLE C200B-1 1.8m MICRONET SPC710 ADSL Splitter Micronet KVM CABLE C200B-3 3m Micronet KVM CABLE C200B-6 6m MICRONET switch 5port 10/100 SP605K MICRONET switch 8port 10/100 SP608K MICRONET KVM 2PORT switch SP212B MICRONET SWITCH M364A 1GBASE-T MICRONET broadband router 1xWAN + 4xLAN SP888C MICRONET switch 16port 10/100 SP616B MICRONET ADSL modem Router SP3351 MICRONET DSL/Cable Router with Print Server SP888B MICRONET SP951 PowerLine Ethernet Adapter MICRONET switch 16 port 10/100 SP616EA MICRONET ADSL2+ modem Router SP3364 MICRONET ADSL modem Router SP3354 MICRONET KVM 4PORT switch SP214A MICRONET switch 24port 10/100 SP624EA MICRONET ADSL2+ wireless modem Router SP3367 MICRONET switch 24port 10/100 rack SP624R MICRONET 8port GIGA SWITCH SP668C MICRONET switch 8port gigabit SP668A
643,71 Sk 643,71 Sk 0,00 Sk 51,60 Sk 0,00 Sk 1 406,10 Sk 2 438,10 Sk 1 277,10 Sk 1 277,10 Sk 0,00 Sk 1 457,70 Sk 772,71 Sk 967,50 Sk 5 998,50 Sk 670,80 Sk 825,60 Sk 851,40 Sk 1 277,10 Sk 1 341,60 Sk 632,10 Sk 6 437,10 Sk 3 083,10 Sk 657,90 Sk 574,05 Sk 864,30 Sk 1 030,71 Sk 0,00 Sk 509,55 Sk 651,45 Sk 883,65 Sk 3 063,75 Sk 3 534,60 Sk 4 231,20 Sk 10 990,80 Sk 1 057,80 Sk 2 334,90 Sk 232,20 Sk 309,60 Sk 322,50 Sk 632,10 Sk 735,30 Sk 838,50 Sk 1 148,10 Sk 1 483,50 Sk 1 535,10 Sk 1 741,50 Sk 1 793,10 Sk 1 804,71 Sk 1 896,30 Sk 1 960,80 Sk 2 205,90 Sk 2 283,30 Sk 2 515,50 Sk 3 223,71 Sk 3 276,60 Sk 3 289,50 Sk 3 844,20 Sk 4 708,50 Sk

Myi > Gulikov > PS/2 GENIUS NetScroll PS2 black GENIUS NetScroll PS2 Myi > Laserov > Wireless Optick my LOGITECH MX610 LASER Optick my LOGITECH MX1000 LASER Myi > Optick > PS/2 GENIUS NetScroll 100 PS2 GENIUS NetScroll 110 PS2 GENIUS NetScroll 110 PS/2 GENIUS NetScroll EYE PS2 GENIUS NetScroll EYE V2 PS2 metalic GENIUS NetScroll EYE V2 PS/2 black GENIUS Traveler PS2 black GENIUS Traveler PS2 silver GENIUS Traveler PS2 red GENIUS Traveler PS2 IRIS green GENIUS Traveler PS2 IRIS white MOUSE LOGITECH OPTICAL WHEEL S96 MOUSE LOGITECH OPTICAL WHEEL S96 BLACK Optick my BENQ M800 400dpi ierna USB+PS/2 Optick my BENQ M107 USB+PS/2 400dpi modr Optick my BENQ M101mini USB+PS/2 400dpi modr Optick my BENQ N300mini USB+PS/2 800dpi modr Optick my BENQ N300mini USB+PS/2 800dpi ierna Optick my BENQ N300mini USB+PS/2 800dpi erven Optick my BENQ M800 800dpi strieborn USB+PS/2 GENIUS NetScroll EYE V2 PS/2+USB metalic GENIUS Traveler PS2+USB 400DPI GENIUS Traveler PS2+USB black GENIUS Traveler PS2+USB silver GENIUS Traveler PS2+USB ruby GENIUS Traveler PS2+USB IRIS green GENIUS Traveler PS2+USB IRIS white GENIUS Mini Traveler PS2+USB 800DPI ruby GENIUS Mini Traveler PS2+USB 800DPI silver GENIUS NetScroll EYE PS2+USB blue GENIUS MINI TRACER U+P metalic GENIUS EASYTRACK OPTICAL U+P GENIUS Navigator 500 800dpi USB+PS/2 BLUE GENIUS Navigator 500 800dpi USB+PS/2 GREEN GENIUS Navigator 500 800dpi USB+PS/2 RED Optick my LOGITECH RX300 ierna Optick my LOGITECH RX300 biela Optick my LOGITECH PILOT OPTICAL Optick my LOGITECH PILOT OPTICAL BLACK Optick my LOGITECH MX310 Microsoft Wheel Mouse Optical PS2+USB black Microsoft Wheel Mouse Optical PS2+ USB Microsoft Intelli Mouse Optical 00017 Microsoft Intelli Mouse Optical black Microsoft Intelli Mouse Explorer GENIUS NetScroll 110 USB black GENIUS NetScroll 110 USB white GENIUS Mini Traveler USB 800DPI blue GENIUS NetScroll SUPERIOR blue GENIUS NetScroll SUPERIOR green GENIUS NetScroll SUPERIOR ruby 24
0,00 Sk 99,33 Sk 99,33 Sk 0,00 Sk 1 960,80 Sk 2 309,10 Sk 0,00 Sk 205,11 Sk 205,11 Sk 205,11 Sk 205,11 Sk 218,01 Sk 218,01 Sk 295,41 Sk 295,41 Sk 295,41 Sk 347,01 Sk 347,01 Sk 321,21 Sk 321,21 Sk 283,80 Sk 295,41 Sk 334,11 Sk 425,70 Sk 425,70 Sk 425,70 Sk 477,30 Sk 308,31 Sk 321,21 Sk 334,11 Sk 334,11 Sk 334,11 Sk 372,81 Sk 372,81 Sk 374,10 Sk 374,10 Sk 374,10 Sk 432,15 Sk 503,10 Sk 567,60 Sk 567,60 Sk 567,60 Sk 464,40 Sk 464,40 Sk 683,70 Sk 683,70 Sk 1 257,75 Sk 385,71 Sk 385,71 Sk 514,71 Sk 514,71 Sk 832,05 Sk 232,20 Sk 232,20 Sk 374,10 Sk 514,71 Sk 514,71 Sk 514,71 Sk
GENIUS NetScroll SUPERIOR silver Optick my LOGITECH MX518 Microsoft Basic Mouse Optical USB P58-00007 Microsoft Basic Mouse Optical black USB Microsoft Notebook Optical Mouse USB Myi > Podloky > Jednofarebn Podloka pod my OPEN CELL Podloka pod my jednofarebn 20ks BOX Podloka pod my JEDNOFAREBN Podloka pod my obrzkov 20ks BOX Podloka pod my OBRZKOV Podloka pod my THIN tvarovan PODLOKA POD MY BLACK s opierkou na ruku PODLOKA POD MY BLUE s opierkou na ruku PODLOKA POD MY RED s opierkou na ruku PODLOKA POD MY DELUXE gelov Podloka pod my Thermaltake Gamma pad A2256 Myi > Wireless > PS/2 + USB GENIUS Wireless Navigator 800dpi USB+PS2 Microsoft Wireless Optical Mouse Microsoft Wireless Explorer mouse 2.0 Optick my BENQ M310 800dpi ierna USB GENIUS Wireless Mini Navigator 800dpi USB GENIUS WIRELESS ERGO 3000 ruby GENIUS WIRELESS ERGO 5000 blue GENIUS WIRELESS ERGO 5000 ruby GENIUS WIRELESS Pointer Ice blue USB Microsoft Notebook Optical Wireless Mouse Nstroje, nradie > Kufrky, obaly TOOL CASE kufrk 820 ierny TOOL CASE kufrk 902 ierny TOOL CASE kufrk hlinkov 5030 Nstroje, nradie > Meracie prstroje Digitlny multimeter 830L Analgov multimeter 360 Digitlny multimeter 60A Nstroje, nradie > Profesionlne nradie Odstraova izolcie + n 063 Krimpovacie kliete 150 COAX Krimpovacie kliete 085 pre RJ45 Krimpovacie kliete 508 pre RJ45/RJ11 Krimpovacie kliete 040 3l-in-one Krimpovacie kliete 080 all-in-one Spjkovac nstroj s PID kontrolu teploty Krimpovacie kliete IC pre RJ11/12 Krimpovacie kliete IC modular RJ11/12/45 BAR CODE SCANNER Long Range PS/2 BAR CODE SCANNER Long Range USB BAR CODE SCANNER USB LASER 60mm Nstroje, nradie > Sady TOOL BOX 012 sada nradia 12ks TOOL BOX 130NM HOBBY TOOL BOX 023 sada nradia COMPUTER KIT TOOL BOX 026 sada nradia PREMIUM TOOL BOX 036 sada nradia PC PROFESIONAL TOOL BOX 231 sada nradia WRENCH TOOL BOX 212 sada nradia IZOLATOR TOOL BOX 050 sada nradia PC SERVICE

GENIUS J-10 (200W) GENIUS Q-16 (320W) GENIUS J-16 (320W) GENIUS SP-HF 2.GENIUS SP HF 2.BLUE GENIUS SP HF 2.BLACK LOGITECH S-100 LOGITECH X120 Reproduktory/audio > Konfigurcia 2 + 1 CREATIVE SBS380 2+1 CREATIVE P380 2+1 CREATIVE SBS390 2+1 CREATIVE INSPIRE T3030 2+1 CREATIVE I-TRIGUE 3220 2+1 CREATIVE I-TRIGUE 3330 2+1 CREATIVE I-TRIGUE 3400 2+1 CREATIVE MEGAWORKS THX 250 2+1 GENIUS SW 2.GENIUS SW 2.GENIUS SW 2.1 FLAT 650 GENIUS SW 2.LOGITECH S-200 2+1 LOGITECH X-210 2+1 LOGITECH X230 2+1 LOGITECH Z-3E 2+1 ierne LOGITECH Z-2300 2+1 MERCURY SW1800 Yakumo Fun & Sound2 2+1 Reproduktory/audio > Konfigurcia 5 + 1 CREATIVE GD 580 5+1+ D CREATIVE P5800 5+1 CREATIVE T6060 5+1 CREATIVE I-TRIGUE 5600 CREATIVE GIGAWORKS Pro Gamer 500 5+1 GENIUS SW-5.1 HF 1200 GENIUS Home Theater GHT-502 GENIUS SW 5.1 HF 3000 GENIUS SW 5.1 Home Theater GENIUS GHT-V150 5+1 GENIUS GHT-S200 5+1 LOGITECH X530 5+1 LOGITECH Z-5400 5+1 LOGITECH Z-5500 Digital 5+1 LOGITECH Z-5450 5+1 MERCURY HT 6200 5.1 MERCURY HT 6700 5.1 Yakumo Fun & Sound1 5+1 Reproduktory/audio > Konfigurcia 7 + 1 CREATIVE T7900 7+1 CREATIVE S750 7+1 Reproduktory/audio > Sluchdla, mikrofny > Mikrofn MANHATTAN stoln mikrofn PLASTIC ADJ nastaviten MANHATTAN stoln mikrofn PLASTIC STARDUST mikrofon SM01A clip-on STARDUST mikrofon SM02 stoln STARDUST mikrofon SM03A FLEXIBILNY GENIUS slchadl do u HP-02E GENIUS slchadl s mikrofnom HS-02B
425,70 Sk 632,10 Sk 709,50 Sk 890,10 Sk 1 019,10 Sk 1 922,10 Sk 385,71 Sk 772,71 Sk 0,00 Sk 980,40 Sk 1 288,71 Sk 1 288,71 Sk 1 780,20 Sk 2 320,71 Sk 3 070,20 Sk 3 094,71 Sk 5 585,70 Sk 967,50 Sk 1 148,10 Sk 1 277,10 Sk 1 767,30 Sk 864,30 Sk 1 251,30 Sk 1 612,50 Sk 3 083,10 Sk 5 224,50 Sk 1 277,10 Sk 1 277,10 Sk 0,00 Sk 5 856,60 Sk 2 373,60 Sk 2 734,80 Sk 6 061,71 Sk 10 307,10 Sk 1 922,10 Sk 2 825,10 Sk 3 212,10 Sk 4 115,10 Sk 5 095,50 Sk 7 546,50 Sk 2 578,71 Sk 9 017,10 Sk 12 758,10 Sk 14 641,50 Sk 2 191,71 Sk 2 567,10 Sk 1 702,80 Sk 0,00 Sk 3 868,71 Sk 13 919,10 Sk 0,00 Sk 58,05 Sk 64,50 Sk 76,11 Sk 101,91 Sk 127,71 Sk 127,71 Sk 161,25 Sk
GENIUS slchadl HS-03A GENIUS Hands-free slchadlo s mikrofonom /NOKIA/ GENIUS slchadl HS-02i GENIUS slchadl s mikrofnom HS-04S GENIUS slchadl s mikrofnom HS-04A GENIUS slchadl HP04D GENIUS slchadl HS-04V GENIUS slchadl pre domce kino HP5.1V MANHATTAN STEREO HEADSET SLIM MANHATTAN STEREO HEADSET VOLUME CONTROL MANHATTAN SINGLE HEADSET mono black MANHATTAN STEREO HEADSET EXECUTIVE MANHATTAN STEREO HEADSET DELUXE MANHATTAN STEREO HEADSET WIRELESS LOGITECH slchadl DIALOG220 stereo LOGITECH slchadl DIALOG812 stereo LOGITECH slchadl Internet Chat Skener > 1200x2400 dpi Scanner BenQ 5000U Scanner BenQ 5000U BLACK Scanner BenQ 5150C Scanner BenQ 5160 Scanner BenQ 5250C Scanner BenQ 6550T Scanner BenQ 7550T SCANNER CANON LiDE25 SCANNER CANON LiDE60F Scanner GENIUS VIVID 1200XE USB Slim Scanner GENIUS VIVID 1200X USB Slim Scanner GENIUS Slim 1200 USB Scanner GENIUS Slim 1200 USB2.0 Scanner GENIUS HR 7X USB A4 + DIA Skener > 2400 x 4800 dpi SCANNER CANON LiDE500F Skener > 2400x2400 dpi Scanner GENIUS HR 8 slim Skener > 3200 x 6400dpi SCANNER CANON 4200F SCANNER CANON 8400F EPSON SCANNER Perfection Photo 3590 Skrinky > Big Tower bez zdroja MAMBO black VC2000BNS TSUNAMI silver aluminum silver VA3000SNA TSUNAMI black aluminum VA3000BNA TSUNAMI black aluminum + window VA3000BWA TSUNAMI silver aluminum + window VA3000SWA SHARK black + window VA7000BWA SHARK silver + window VA7000SWA ARMOR black + window VA8000BWS KANDALF black + window VA9000BWS ARMOR silver + window VA8000SWA KANDALF silver + window VA9000SWA Xaser TAI-CHI silver VB5000SNA Xaser TAI-CHI silver liquid VB5001SNA Skrinky > Extended ATX/Server Extended ATX CHENBRO SR10569-011 BLACK Extended ATX CHENBRO SR10769-021 BLACK CHENBRO RISER CARD pre RM225/RM224/RM223 3x PCI

Skrinky > Zdroje > 300-399 W Zdroj Enermax EG301AX-VE Zdroj ATX 350W pre P4 Zdroj ATX 350W pre P4 + PFC Zdroj ATX 300W pre P4 Zdroj Thermaltake PurePower 360W Silent W0007 Zdroj Thermaltake PurePower 350W Fanless W0050 Zdroj ZALMAN 300W ZM300B-APS Zdroj Asus A-45GA 450W pre P4 Zdroj Enermax EG465AX-VE Zdroj Enermax EG495AX-VE(W)SFMA Zdroj Tagan TG430-U22 430W Zdroj Tagan TG480-U22 480W Zdroj ATX 400W pre P4 Zdroj ATX 400W pre P4 PFC Zdroj ATX 400W pre P4 SILENT Zdroj ATX 450W pre P4 Zdroj ATX 450W pre P4 DELUXE Zdroj ATX 400W pre P4 + PFC retail Zdroj Thermaltake PurePower 420W Silent W0009 Zdroj Thermaltake PurePower 480W Silent W0026 Zdroj Thermaltake PurePower 480W Silent W0011 Zdroj Thermaltake PurePower 480W Silent W0043 Zdroj Thermaltake PurePower 460W Silent W0063 Zdroj Thermaltake PurePower 480W Butterfly W0019 Zdroj ZALMAN 400W ZM400B-APS Zdroj Enermax G565AX-VE(G) Zdroj Tagan TG530-U22 530W Zdroj Tagan TG580-U22 580W Zdroj ATX 400W pre P4 + TC retail Zdroj Thermaltake PurePower 550W Silent W0096 Zdroj Thermaltake PurePower 500W Silent W0057 Zdroj Thermaltake PurePower 560W Silent W0023 Zdroj Thermaltake PurePower 680W W0049 Software > Antivrus > AVG Upgrade antivru AVG OEM o 12mesiacov Antivr AVG7 SK CD OEM Software > Lexikon CD LINGEA LEXICON 2002 ENGLISH Software > Linux > Mandrake LINUX Mandrake 10.1 DVD Software > MS NERO 7 premium Microsoft WORKS 8.0 CZ OEM Microsoft OFFICE 2003 Students-Teacher WIN32 SK OE Microsoft WORD 2003 SK OEM Microsoft OFFICE Basic 2003 CZ OEM Microsoft OFFICE Basic 2003 EN OEM Microsoft OFFICE Basic 2003 SK OEM Microsoft OFFICE 2003 Small Business SK OEM Microsoft OFFICE 2003 Small Business CZ OEM Microsoft OFFICE 2003 Small Business EN OEM Microsoft OFFICE PRO 2003 CZ OEM Microsoft OFFICE PRO 2003 SK OEM Microsoft OFFICE PRO 2003 EN OEM Microsoft WINDOWS XP Home CZ OEM Microsoft WINDOWS XP Home SK OEM Microsoft WINDOWS XP Home HU OEM 24
0,00 Sk 1 933,71 Sk 683,70 Sk 838,50 Sk 606,30 Sk 1 576,38 Sk 5 029,71 Sk 2 218,80 Sk 1 954,35 Sk 3 160,50 Sk 3 728,10 Sk 3 212,10 Sk 3 857,10 Sk 812,70 Sk 890,10 Sk 967,50 Sk 1 238,40 Sk 1 406,10 Sk 1 741,50 Sk 1 753,11 Sk 2 438,10 Sk 2 825,10 Sk 2 863,80 Sk 2 889,60 Sk 2 954,10 Sk 3 689,40 Sk 4 321,50 Sk 4 244,10 Sk 4 760,10 Sk 2 425,20 Sk 3 947,40 Sk 4 153,80 Sk 4 205,40 Sk 4 889,10 Sk 0,00 Sk 412,80 Sk 463,11 Sk 0,00 Sk 322,50 Sk 0,00 Sk 772,71 Sk 0,00 Sk 2 567,10 Sk 514,71 Sk 4 063,50 Sk 4 450,50 Sk 7 288,50 Sk 7 288,50 Sk 7 288,50 Sk 9 662,10 Sk 9 791,10 Sk 9 791,10 Sk 11 984,10 Sk 11 984,10 Sk 12 242,10 Sk 3 341,10 Sk 3 341,10 Sk 3 418,50 Sk

199,95 Sk 219,30 Sk 593,40 Sk 722,40 Sk 735,30 Sk 283,80 Sk 283,80 Sk 283,80 Sk 283,80 Sk 283,80 Sk 283,80 Sk 283,80 Sk 283,80 Sk 283,80 Sk 617,91 Sk 625,65 Sk 683,70 Sk 709,50 Sk 746,91 Sk 772,71 Sk 825,60 Sk 915,90 Sk 941,70 Sk 993,30 Sk 1 006,20 Sk 1 019,10 Sk 1 019,10 Sk 1 019,10 Sk 1 019,10 Sk 1 019,10 Sk 1 083,60 Sk 1 083,60 Sk 1 096,50 Sk 1 096,50 Sk 1 122,30 Sk 1 135,20 Sk 1 199,70 Sk 1 212,60 Sk 1 212,60 Sk 1 212,60 Sk 1 960,80 Sk 548,25 Sk 606,30 Sk 632,10 Sk 632,10 Sk 632,10 Sk 664,35 Sk 683,70 Sk 838,50 Sk 915,90 Sk 0,00 Sk 348,30 Sk 0,00 Sk 4 063,50 Sk 2 309,10 Sk 2 954,10 Sk 3 031,50 Sk 3 199,20 Sk
Toner pre MINOLTA PagePro PP1400W 2000str Fotovalec pre MINOLTA PagePro 6 /4360--01/ Fotovalec pre MINOLTA PagePro PP1400W Fotovalec pre MINOLTA PagePro 1300
Fotovalec pre MINOLTA PagePro 8 /4000--02/ Fotovalec pre MINOLTA Magicolor 2300 Spotrebn materil > Papier > Flie LOMOND Film for ink printer self adhesive 10xA4 LOMOND PET Film for laser printers 10xA4 LOMOND PET Film for inkjet printers 10xA4 LOMOND PET Film for laser printers 50xA4 LOMOND PET Film for laser printer A4/25 ADH WHITE LOMOND PET Film for laser printer A4/25 ADH CLEAR LOMOND Photo Inkjet Matt Coated 50x230g/m2 A6 LOMOND Photo Inkjet Matt Coated 100x90g/m2 A4 LOMOND Premium Photo Super Glossy 20x260g/m2 10x15 LOMOND Premium Photo Semi Glossy 20x260g/m2 10x15c LOMOND Photo Inkjet Satin 20x280g 10x15 LOMOND Photo Inkjet Glossy 50x230g/m2 10x15cm LOMOND Photo Inkjet GlosyMatt Coated 25x170g/m2 A4 LOMOND Photo Inkjet GlosyMatt Coated 25x220g/m2 A4 LOMOND Photo Inkjet Glossy 25x230g/m2 A4 LOMOND Premium Photo Super Glossy 20x170g/m2 A4 LOMOND Photo Inkjet Matt Coated 100x120g/m2 A4 LOMOND Premium Photo Semi Glossy 20x170g/m2 A4 LOMOND Photo Print&Stick Glossy 25x85g/m2 A4 10x15 LOMOND Photo Print&Stick Glossy 25x85g/m2 A4 9x3 LOMOND Premium Photo Semi Glossy 20x260g/m2 A4 LOMOND Photo Inkjet Silk Glossy 50x170g A4 LOMOND Photo Inkjet Matt Coated 100x160g/m2 A4 LOMOND Premium Photo Super Glossy 20x260g/m2 A4 LOMOND Photo Inkjet Glossy 20x150g/m2 A3 LOMOND Photo Inkjet Glossy 50x140g/m2 A4 LOMOND Photo Inkjet GlosyMatt Coated 50x170g/m2 A4 LOMOND Photo InkJet Glossy/Matt 50x220g/m2 A4 LOMOND Photo Inkjet Glossy 50x230g/m2 A4 LOMOND Thermotransfer Ink paper Bright 10xA4 LOMOND Thermotransfer Ink paper Dark 10xA4 LOMOND Thermotransfer Ink paper Fluorescent 10xA4 LOMOND Fine ART Paper Aquarelle #1 10xA4 LOMOND Fine ART Paper Velveteen 10xA4 LOMOND Fine ART Paper Aquarelle #3 10xA4 LOMOND Fine ART Paper Coarse Linen 10xA4 230g LOMOND Fine ART Paper Collection 10xA4 LOMOND Fine ART Paper Grainy 10xA4 180g LOMOND Tatoo paper 10xA4 Spotrebn materil > Tonery > HP Toner HP C4092A Toner HP C7115A Toner HP C3906A Toner HP Q5949A pre LJ1320/1160 Toner HP Q2612A Toner HP Q2624A Toner HP Q2613A TONER HP Q6000 BLACK pre LJ2600 Toner HP C7115X dvojit Toner HP Q3960A CLJ2550 black TONER HP Q6001A CYAN pre LJ2600 TONER HP Q6002A YELLOW pre LJ2600 TONER HP Q6003A MAGENTA pre LJ2600 Toner HP Q2613X Toner HP C3903A