AVerMedia

NV6000 DOM series
HYBRID and Real Time Digital Surveillance System

Major Features

Hybrid Network Video Recorder (Accepts both CCTV/Analog as well as IP Cameras) Easy setup and usage Point of sale integration (ANSI ASCII Serial output based cash registers) Remote backup of video surveillance data Attention metric designed to measure the attention span of security officers Intelligent Status Notification (Alert you on HDD space, CPU load, Memory usage, etc) Compact mode for cleaner interface Embedded Windows XP (DOM Comes with O/S Preinstalled with NV6000 Software) Keyboard lockup to enhance security Watermark image verification technology Supports over 12 different languages Virtual keyboard Record to multiple hard drives
Watch dog function built in
Smart Voice detection recording
Video enhancer software designed to Visually enhance surveillance video data
Multiple events alarm alert Bookmark playback for easier retrieval
DDNS function supports dynamic IP Central monitoring system enables users to access and monitor multiple NV DVRs simultaneously for a wide range of applications
Dispatch Server shares internet access loading

Performance

Product

Video Input Audio Input

NV6240DOM
16 Channels (single card) 8 channels

NV6480DOM

Display Rate(NTSC / PAL) Recording Rate(NTSC / PAL) (320x240) Operating System
480/400 fps 240/200 fps Windows XP Embedded (DOM)
480/400 fps 480/400 fps Windows XP Embedded (DOM)
* Specifications subject to change without prior notice

Product Specification

Video Feature 16 composite video inputs (BNC connectors) and/or 16 IP Camera (Selected IP Cameras). Max of 16 video feed per system. 8 audio input channels Video Format: NTSC and PAL Support 320x240, 640x480, or 720x480(enhanced) pixels (NTSC & PAL) 16-bit true color RCA composite video out to a regular terminal or TV monitor Supports static as well as dynamic de-interlacing for smoother graphics Built in noise reduction algorithm Display Compact mode and Advanced mode Adjustable frame rate and resolution on each camera Auto Scan with full screen display under 1, 4, 8, 9, 13, 16-camera display modes Digital zoom into specific area Pan/Tilt/Zoom (PTZ) cameras: PTZ script is available for adding new protocols Auto Gain Control (AGC) balances image quality Software based night view function enhances low light condition Recording Video compression: MPEG4 Video Encryption supported Support 320x240, 640x480, and 720x480 D1 resolution recording in 720x480 Full de-interlacing in 640x480 and 720x480 mode Recording modes: Alarm triggered/sensor triggered/motion detection/continuous/smart/scheduled/voice detection Programmable multiple masking zones Intelligent shield protects privacy Capable of recording audio channel(s) with full synchronization Max 8 audio channels recording Auto recycling when storage nearing full Intelligent pre-motion and post motion recording Supports video encryption in Advanced MPEG4 Search & Playback & Backup Real time playback without having to disable recording/network functions Power search: by date, time, camera, area, event, vision, POS text or log file Full screen playback Complete playback control: forward, backward, speed up, slow down Digital zoom into any designated area Export a single frame into a file or print out Set a segment and have it output as avi video clip Visual search by day, hour, minute, second Bookmark search: By time, description. Protect recorded file from being recycled and show file status Direct backup to DVD-RW/CD-RW (Requires Nero Ultra 6.0+) Remote Access Simultaneous multiple remote live/recorded surveillance via Internet Explorer 6 Backup remotely Central management server controls multiple DVRs Remote monitoring / remote recording / playback remote recording / playback server recording Full control of PTZ cameras remotely PDA handy view (Windows CE/Pocket PC 2002 or above) Two-way audio communication 1,4,9 and 16 screen divisions Remote E-map Choose from dial-up, Internet or Lan speed Dispatch server allows you to broadcast video stream to the public Schedule Record, enable network, backup, reboot and disabling alarms One time or weekly schedule Scheduling can be done down to every quarter of an hour E-map Shows you the positions of cameras, sensors and relays Stores up to 8 different maps Alarm Notifications E-mail notifications

FTP notifications Voice modem call out notification Turn relay on (light switch, alarm, etc) Plays warning sound (can be re-recorded) Start recording on multiple cameras (capture video from different angle) Send TV-out signals Launch E-Map Enlarge camera view Send SMS/MMS Alert messages helps security follow proper standard operational procedures User Access
Setup up to 32 users with their own individual passwords for remote access Each user can be preconfigured to perform only certain actions (eg. access specific cameras remotely) I/O card (Included) 4 sensor inputs and 4 relay outputs controls per set

System Requirements

CPU: Pentium 4 3.0 GHz or higher Motherboard: GIGABYTE GA-8I945GMF / GIGABYTE GA-945GM-S2 / ASUS P5LD2-VM OS: XP Embedded (Included in DOM Chip) RAM: 512MB minimum or more HDD: 80GB or higher SATA (up to 4) CD-ROM/DVD-ROM VGA: GIGABYTE GV-RX13128D-RH / ASUS EN7300GS/HTD/256M / ASUS EAX1300 PRO Ethernet: Onboard Product Information Product Name Box Dimension Box Weight Details AVerMedia NV6480DOM 13.5 x 10.5 x 3 2.7 lb

Whats Included?

1 NV6000 Card (either 6480 or 6240) 2 Octopus Cables 1 Watchdog Cable 1 DiskOnModule 1GB Device 1 I/O Box 1 Quick User Guide 1 Installation CD (includes drivers, application program, manual)
Product Information Product Name Box Dimension Box Weight Details AVerMedia NV6240DOM 13.5 x 10.5 x 3 2.7 lb
U.S : (Tel) 1-408-263-3828 (Fax) 1-408-263-8132; U.K : (Tel) 44-1908-218-800 (Fax) 44-1908-218-818 France : (Tel) 33-1-6005-7516 (Fax) 33-1-6005-7842; Spain : (Tel) 34-91-804- 6035 (Fax) 34-91-803-7629 Thailand : (Tel) 66-2-942926 (Fax) 66-2-9429266; Taiwan & International : (Tel) 886-2-2226-3630 (Fax) 886-2-2221-4538 Homepage : www.avermedia.com / www.averdigi.com

Motherboard

P5GZ-MX
E2800 First Edition August 2006
Copyright 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.

Contents

Notices.... vi Safety information...vii About this guide...viii. Typography... ix P5GZ-MX specifications summary.. x.
Chapter 1: Product introduction
1.1 1.2 1.3 Welcome!... 1-2 Package contents... 1-2 Special features... 1-2 1.3.1 1.3.2 1.4 1.5 Product highlights.. 1-2 Innovative ASUS features.. 1-4
Before you proceed... 1-5 Motherboard overview... 1-6 1.5.1 1.5.2 1.5.3 Placement direction.. 1-6 Screw holes.. 1-6. Motherboard layout.. 1-7 Installling the CPU.. 1-8 Installling the CPU heatsink and fan. 1-11. Uninstalling the CPU heatsink and fan. 1-13. Overview... 1-15 Memory configurations.. 1-15 DDR2 Qualified Vendors List.. 1-16 Installing a DIMM.. 1-17 Removing a DIMM... 1-17 Installing an expansion card.. 1-18 Configuring an expansion card. 1-18 Interrupt assignments.. 1-19. PCI slots... 1-20 PCI Express x16.. 1-20 PCI Express x1.. 1-20
Central Processing Unit (CPU).. 1-8 1.6.1 1.6.2 1.6.3
System memory... 1-15. 1.7.1 1.7.2 1.7.3 1.7.4 1.7.5
Expansion slots... 1-18 1.8.1 1.8.2 1.8.3 1.8.4 1.8.5 1.8.6

Jumpers... 1-23

1.10 Connectors... 1-26 1.10.1 Rear panel connectors.. 1-26 1.10.2 Internal connectors.. 1-27

Chapter 2: BIOS setup

2.1 Managing and updating your BIOS... 2-2 2.1.1 2.1.2 2.1.3 2.1.4 2.1.5 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 2.2.7 2.2.8 2.2.9 2.3 2.3.1 2.3.2 2.3.3 2.3.4 2.3.5 2.3.6 2.4 2.4.1 2.4.2 2.4.3 2.4.4 2.4.5 2.4.6 2.4.7
Creating a bootable floppy disk. 2-2 ASUS EZ Flash utility.. 2-3 AFUDOS utility.. 2-4 ASUS CrashFree BIOS 2 utility.. 2-6 ASUS Update utility.. 2-8 BIOS menu screen.. 2-12 Menu bar... 2-12 Navigation keys... 2-12. Menu items.. 2-13 Sub-menu items... 2-13 Configuration fields.. 2-13 Pop-up window.. 2-13. Scroll bar.. 2-13. General help... 2-13 System Time... 2-14 System Date... 2-14 Legacy Diskette A.. 2-14 Primary, Third and Fourth IDE Master/Slave.. 2-15 IDE Configuration... 2-16 System Information.. 2-17 JumperFree Configuration. 2-18. LAN Cable Status.. 2-20. USB Configuration.. 2-21 CPU Configuration.. 2-22 Chipset... 2-23. Onboard Devices Configuration.. 2-25. PCI PnP.. 2-27
BIOS setup program... 2-11.

Main menu... 2-14.

Advanced menu.. 2-18
2.5 Power menu... 2-28 2.5.1 2.5.2 2.5.3 2.5.4 2.5.5 2.6 2.6.1 2.6.2 2.6.3 2.8 3.1 3.2 Suspend Mode.. 2-28. ACPI 2.0 Support.. 2-28 ACPI APIC Support.. 2-28 APM Configuration.. 2-29 Hardware Monitor.. 2-31. Boot Device Priority.. 2-32 Boot Settings Configuration.. 2-33 Security... 2-34.

Boot menu... 2-32

Exit menu... 2-36. Installing an operating system.. 3-2. Support CD information.. 3-2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 Running the support CD... 3-2. Drivers menu... 3-3. Utilities menu... 3-4 Manuals menu... 3-5 ASUS Contact information.. 3-6

Chipset Front Side Bus Memory

VGA Expansion slots

Storage

LAN USB Rear panel

BIOS features
(continued on the next page)
Special features Manageability Internal connectors Power Requirement Form Factor Support CD contents ASUS EZ Flash ASUS CrashFree BIOS 2 ASUS MyLogo ASUS CPR (CPU Parameter Recall) ASUS Q-Fan WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE, Chassis Intrussion 2 x USB 2.0 connectors for 4 additional USB 2.0 ports 1 x CPU fan connector 1 x Chassis fan connector 1 x 24-pin EATX power connector 1 x 4-pin ATX 12 V power connector 1 x CD in connector 1 x Chassis intrusion connector 1 x Front panel high-definition audio connector 1 x S/PDIF out connector 1 x System Panel connector ATX power supply (with 24-pin and 4-pin 12 V plugs) Micro-ATX form factor: 9.6 in x 8 in Device drivers ASUS PC Probe II ASUS Live Update utility Anti-virus software (OEM version)
*Specifications are subject to change without notice.
This chapter describes the motherboard features and the new technologies it supports.

Product introduction

Welcome!
Thank you for buying an ASUS P5GZ-MX motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

Package contents

ASUS P5GZ-MX motherboard 1 x Serial ATA signal cables 1 x Serial ATA power cable 1 x Ultra DMA 100/66 cable 1 x Floppy disk drive cable I/O shield ASUS motherboard support CD User guide
Check your motherboard package for the following items. Motherboard Cables Accessories Application CDs Documentation
If any of the above items is damaged or missing, contact your retailer.

Special features

1.3.1 Product highlights
LGA775 Intel Core2 Processor Ready
This motherboard supports the latest Intel Core2 processor in the LGA775 package. With the new Intel Core microarchitecture technology and 1066* / 800 /533 MHz FSB, Intel Core2 processor is one of the most powerful and energy efficient CPU in the world.

If you purchased a separate CPU heatsink and fan assembly, make sure that a Thermal Interface Material is properly applied to the CPU heatsink or CPU before you install the heatsink and fan assembly.
To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the motherboard.
Fastener Motherboard hole
Make sure each fastener is oriented as shown, with the narrow groove directed outward.
Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.

B A B A

When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
CPU FAN PWM CPU FAN IN CPU FAN PWR GND
P5GZ-MX CPU Fan Connector
Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. We recommend you to install the chassis fan for better thermal state.
1.6.3 Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise.
Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard.

B A A B

Remove the heatsink and fan assembly from the motherboard.
Rotate each fastener clockwise to reset the orientation.

Narrow end of the groove

The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.)

System memory

1.7.1 Overview
The motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket. The figure illustrates the location of the DDR2 DIMM sockets:

DIMM_A1 DIMM_B1

P5GZ-MX 240-pin DDR2 DIMM Sockets
Channel Channel A Channel B Sockets DIMM_A1 DIMM_B1
1.7.2 Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets.

For dual-channel configuration, the total size of memory module(s) installed per channel must be the same (DIMM_A1 = DIMM_B1). Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. Refer to the DDR2 Qualified Vendors List on next page for details. This motherboard does not support memory modules made up of 128 Mb chips or double-sided x16 memory moudules.

128 Pins

112 Pins
1.7.3 DDR2 Qualified Vendors List
The following table lists the memory modules that have been tested and qualified for use with this motherboard. Visit the ASUS website (www.asus. com) for the latest DDR2 DIMM modules for this motherboard.
DDRQualified Vendors List
Size Vendor Model Side(s) Component 512MB 1024MB 256MB 512MB 512MB 512MB 1024MB 1024MB 512MB 1024MB 512MB 512MB 256MB 512MB 1024MB 512MB 1024MB KINGSTON KINGSTON Qimonda Qimonda Qimonda Hynix Hynix Hynix Hynix Hynix ELPIDA ELPIDA Apacer KINGMAX KINGMAX KINGMAX KINGMAX HYB18T512800AF37 5YDIID9GCT HYB18T512160AF-3.7 HYB18T512800AF37 HYB18T512800BF37 HY5PS12821F-C4 HY5PS12821F-C4 HY5PS12821FP-C4 HY5PS12821AFP-C3 HY5PS12821AFP-C3 E5108AB-5C-E E5108AB-5C-E E5116AB-5C-E E5108AE-5C-E E5108AE-5C-E KKEA88E4AAK-37 5MB22D9DCN SS DS SS SS SS SS DS DS SS DS SS SS SS SS DS SS DS KVR533D2N4/512 KVR533D2N4/1G HYS64T32000HU-3.7-A HYS64T64000HU-3.7-A HYS64T64000HU-3.7-B HYMP564U648-C4 HYMP512U648-C4 HYMP512U648-C4 HYMP564U64AP8-C3 HYMP512U64AP8-C3 EBE51UD8ABFA-5C EBE51UD8ABFA-5C-E 78.81077.420 KLBC28F-A8EB4 KLBD48F-A8EB4 KLBC28F-A8KE4 KLBD48F-A8ME4 DIMM support A B
Side(s): SS - Single Sided DIMM Support:

DS - Double Sided

A - supports one module inserted into either slot, in a Single-channel memory configuration. B - supports one pair of modules inserted into the yellow slots as one pair of Dualchannel memory configuration. Visit the ASUS website (www.asus.com) for the latest memory Qualified Vendor List (QVL).

1.7.4 Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components.
To install a DIMM: 1. 2. Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.

DDR2 DIMM notch

Unlocked retaining clip
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM. The DDR2 DIMM sockets do not support DDR DIMMs. DO not install DDR DIMMs to the DDR2 DIMM sockets.

1.7.5 Removing a DIMM

Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. 2
Remove the DIMM from the socket.

Expansion slots

In the future, you may need to install expansion cards. The following subsections describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
1.8.1 Installing an expansion card
To install an expansion card: 1. 2. 3. 4. 5. 6. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. Remove the system unit cover (if your motherboard is already installed in a chassis). Remove the bracket opposite the slot that you intend to use. Keep the screw for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Secure the card to the chassis with the screw you removed earlier. Replace the system cover.
1.8.2 Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings. 1. 2. 3. Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for information on BIOS setup. Assign an IRQ to the card. Refer to the tables on the next page. Install the software drivers for the expansion card.
1.8.3 Interrupt assignments
Standard interrupt assignments
IRQ Standard Function System Timer Keyboard Controller Re-direct to IRQ#9 Communications Port (COM1)* IRQ holder for PCI steering* Floppy Disk Controller Printer Port (LPT1)* System CMOS/Real Time Clock IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering* PS/2 Compatible Mouse Port* Numeric Data Processor Primary IDE Channel
* These IRQs are usually available for ISA or PCI devices.

Integrated Graphics mode (default)

1-2 pin

other PCIe devices
The PCIEx1 slot is disabled when you set XJ1-5 to pins 2-3.
3. USB device wake-up (3-pin USBPW1-4, USBPW5-8) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). The USBPW1-4 jumper is for the rear USB ports (USB port 1-4). The USBPW5-8 jumper is for the internal USB connectors (USB port 5-8) that you can connect to additional USB ports.

USBPW1-4

+5V (Default)
P5GZ-MX USB Device Wake Up
The USB device wake-up feature requires a power supply that can provide 500 mA on the +5VSB lead for each USB port; otherwise, the system would not power up. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

1.10 Connectors

1.10.1Rear panel connectors

1. 2. 3.

PS/2 mouse port (green). This port is for a PS/2 mouse. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. LAN (RJ-45) port. Supported by Marvell Gigabit LAN controller, this port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications.

LAN port LED indications

Status OFF ORANGE BLINKING Description No link Linked Data activity
ACT/LINK LED SPEED LED Status OFF ORANGE GREEN Description 10 Mbps connection 100 Mbps connection 1 Gbps connection

ACT/LINK SPEED LED LED

LAN port

4. 5. 6.

Line In port (light blue). This port connects the tape, CD, DVD player, or other audio sources. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, and 6-channel configuration, the function of this port becomes Front Speaker Out. Microphone port (pink). This port connects a microphone.
Refer to the audio configuration table on the next page for the function of the audio ports in 2, 4, or 6-channel configuration.
Audio 2, 4, or 6-channel configuration
Port Light Blue Lime Pink Headset 2-channel Line In Line Out Mic In 4-channel Rear Speaker Out Front Speaker Out Mic In 6-channel Rear Speaker Out Front Speaker Out Bass/Center

7. 8. 9.

USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. VGA port. This port is for a VGA monitor or other VGA-compatible devices.

10. Serial port. This 9-pin COM1 port is for pointing devices or other serial devices. 11. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1.10.2Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. FLOPPY
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
P5GZ-MX Floppy Disk Drive Connector
2. IDE connectors (40-1 pin PRI_IDE) Theonboard IDE connectors are for Ultra DMA 100/66/33 signal cables. There are threeconnectors on each Ultra DMA 100/66/33 signal cable: blue, black, and gray. Connect the blue connector to themotherboards IDE connector, then select one of the following modes to configure your device(s).

P5GZ-MX IDE Connector

Drive jumper setting Single device Two devices Cable-Select or Master Cable-Select Master Slave Mode of device(s) Master Slave Master Slave Cable connector Black Black Gray Black or gray
Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector. This prevents incorrect insertion when you connect the IDE cable. Use the 80-conductor IDE cable for Ultra DMA 100/66/33 IDE devices. If any device jumper is setas Cable-Select,make sure all other device jumpers have the same setting.
3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND
GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND
GND RSATA_RXN3 RSATA_RXP3 GND RSATA_TXN3 RSATA_TXP3 GND
GND RSATA_RXN4 RSATA_RXP4 GND RSATA_TXN4 RSATA_TXP4 GND
P5GZ-MX SATA Connectors When using the connectors in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1/2 connector. Refer to the table below for the recommended SATA hard disk drive connections.
Serial ATA hard disk drive connection
Connector Color Setting Use

SATA1/2 SATA3/4

Red Black

Master Slave

Boot disk Data Disk
4. CPU, Power and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of a total of 1A~2.2A (26.4W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

2.1.4 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD, or the floppy disk that contains the updated BIOS file.
Prepare the motherboard support CD, or the floppy disk containing the updated motherboard BIOS before using this utility. Make sure that you rename the original or updated BIOS file in the floppy disk to P5GZMX.ROM.
Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk: 1. 2. 3. Turn on the system. Insert the floppy disk with the original or updated BIOS file to the floppy disk drive. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery. Checking for floppy.
If your display monitor is connected to the onboard VGA connector, the display monitor will turn-off and the system will beep once while the CrashFree BIOS 2 starts updating your system. The system will beep once again while the process is finished, and the display will return after the system restarts.
When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery. Checking for floppy. Floppy found! Reading file P5GZMX.ROM. Completed. Start flashing.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!
Restart the system after the utility completes the updating process.
Recovering the BIOS from the support CD
To recover the BIOS from the support CD: 1. 2. 3. Remove any floppy disk from the floppy disk drive, then turn on the system. Insert the support CD to the optical drive. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file.
When no floppy disk is found, the utility automatically checks the optical drive for the original or updated BIOS file. The utility then updates the corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery. Checking for floppy. Floppy not found! Checking for CD-ROM. CD-ROM found! Reading file P5GZMX.ROM. Completed. Start flashing.

2.4.5 Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings Configure DRAM Timing by SPD [Enabled] Boot Graphic Adapter Priority [Internal VGA] Internal Graphics Mode Select [Enabled, 8MB] Graphics memory type [Auto]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is Disabled. Configuration options: [Disabled] [Enabled]
Select Screen Select Item +Change Option F1 General Help F10 Save and Exit ESC Exit parameters are set according
DRAM CAS# Latency [5 Clocks] Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [6 Clocks] [5 Clocks] [4 Clocks] [3 Clocks] DRAM RAS# Precharge [4 Clocks] Controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks] DRAM RAS# to CAS# Delay [4 Clocks] Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks] DRAM RAS# Activate to Precha [15 Clocks] Sets the RAS Activate timing to Precharge timing. Configuration options: [1 Clock] [2 Clocks] ~ [18 Clocks] DRAM Write Recovery Time [4 Clocks] Sets the DRAM Write Recover Time. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks]
Booting Graphic Adapter Priority [Internal VGA]
Allows selection of the graphics controller to use as primary boot device. Configuration options: [Internal VGA] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Sets the internal graphics mode. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
Graphics memory type [Auto]
Sets the graphics memory type. Configuration options: [Auto] [DVMT] [FIX] [DVMT+FIX]
2.4.6 Onboard Devices Configuration
Configure Win627EHF Super IO Chipset HD Audio Controller [Enabled] Front Panel Support Type [AC97] Onboard PCI GbE LAN [Enabled] PCI LAN Option ROM [Disabled] Serial Port1 Address [3F8/IRQ4] Parallel Port Address [378] Parallel Port Mode [ECP] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7]
HD Audio Controller [Enabled]
Enables or disables the Azalia/AC97 CODEC. Configuration options: [Enabled] [Disabled]
Front Panel Support Type [AC97] Allows you to set the front panel audio connector (AAFP) mode to legacy AC97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97][HD Audio]
OnBoard PCI GbE LAN [Enabled]
Allows you to enable or disable the onboard PCI Gigabit LAN controller. Configuration options: [Disabled] [Enabled]

IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved]

Power menu

The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options.
Suspend Mode [Auto] ACPI 2.0 Support [No] ACPI APIC Support [Enabled] APM Configuration Hardware Monitor
2.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
2.5.2 ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
2.5.3 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled]

2.5.4 APM Configuration

APM Configuration Power Button Mode [On/Off] Restore on AC Power Loss [Power Off] Power On By RTC Alarm [Disabled] Power On By External Modems [Disabled] Power On By PCI Devices [Disabled] Power On By PCIE Devices [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Mouse [Disabled]

Enabled or disable APM.

Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear with set values. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on.

Boot Device Priority 1st Boot Device [1st FLOPPY DRIVE] 2nd Boot Device [PM-ST330620A] 3rd Boot Device [PS-ASUS CD-S360]
1st ~ xxth Boot Device [1st Floppy Drive]
Enter Go to Sub-screen These items specify the boot device priority sequence from the available F1 General Help devices. The number of device items that appears on F10 screen depends the Save and Exit ESC Exit on the number of devices installed in the system. Configuration options: [xxxxx Drive] [Disabled]
Select Screen Select Item
2.6.2 Boot Settings Configuration
Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] AddOn ROM Display Mode [Force BIOS] Bootup Num-Lock [On] PS/2 Mouse Support [Auto] Wait For F1 If Error [Enabled] Hit DEL Message Display [Enabled] Interrupt 19 Capture [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo feature.
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse. Configuration options: [Disabled] [Enabled] [Auto]
Wait for F1 If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]
Hit DEL Message Display [Enabled]
When set to Enabled, the system displays the message Press DEL to run Setup during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

2.6.3 Security

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.
Security Settings Supervisor Password User Password : Not Installed : Not Installed

Clear User Password

Select this item to clear the user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always]

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items.
Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults
Exit system setup after saving the changes. F10 key can be used for this operation.
Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit.

Exit & Save Changes

Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. An onboard backup battery sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select Ok to save changes and exit.
If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting. Press <Enter> to save the changes while exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than System Date, System Time, and Password, the BIOS asks for a confirmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears. Select Ok to discard any changes and load the previously saved values.

Load Setup Defaults

This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select Ok to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM.
This chapter describes the contents of the support CD that comes with the motherboard package.

Software support

Installing an operating system
This motherboard supports Windows 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.

ASUS P5L-MX

3.2.5 ASUS Contact information
Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide.
The Appendix describes the CPU features that the motherboard supports.

CPU features

Intel EM64T
The motherboard is fully compatible with Intel Pentium 4 LGA775 processors running on 32-bit operating systems. The motherboard comes with a BIOS file that supports EM64T. You can download the latest BIOS file from the ASUS website (www.asus. com/support/download/) if you need to update the BIOS file. See Chapter 2 for details. Visit www.intel.com for more information on the EM64T feature. Visit www.microsoft.com for more information on Windows 64-bit OS.
Using the Intel EM64T feature
To use the Intel EM64T feature: 1. 2. 3. 4. Install an Intel Pentium 4 CPU that supports the Intel EM64T. Install a 64-bit operating system (Windows XP Professional x64 Edition). Install the 64-bit drivers for the motherboard components and devices from the support CD. Install the 64-bit drivers for expansion cards or add-on devices, if any.
Refer to the expansion card or add-on device(s) documentation, or visit the related website, to verify if the card/device supports a 64-bit system.
Enhanced Intel SpeedStep Technology (EIST)
The motherboard comes with a BIOS file that supports EIST. You can download the latest BIOS file from the ASUS website (www. asus.com/support/download/) if you need to update the BIOS. See Chapter 2 for details. Visit www.intel.com for more information on the EIST feature.
A.2.1 System requirements
Before using EIST, check your system if it meets the following requirements: Intel Pentium 4 processor with EIST support BIOS file with EIST support Operating system with EIST support (Windows XP SP2/Linux 2.6 kernel or later versions)

A.2.2 Using the EIST

To use the EIST feature: 1. 2. 3. 4. 5. 6. 7. Turn on the computer, then enter the BIOS Setup. Go to the Advanced Menu, highlight CPU Configuration, then press <Enter>. Set the Intel(R) SpeedStep Technology item to [Automatic], then press <Enter>. See page 2-24 for details. Press <F10> to save your changes and exit the BIOS setup. After the computer restarts, right click on a blank space on the desktop, then select Properties from the pop-up menu. When the Display Properties window appears, click the Screen Saver tab. Click the Power button on the Monitor power section to open the Power Options Properties window.