Asus P5VDC-tvm SE
Asus P5VDC-tvm SE, size: 1.1 MB
Here you can find all about Asus P5VDC-tvm SE like manual and other informations. For example: review.
Asus P5VDC-tvm SE manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Asus P5VDC-tvm SE please write about it to help other people.
[ Report abuse or wrong photo | Share your Asus P5VDC-tvm SE photo ]
User reviews and opinions
|Sybex||11:02am on Monday, March 15th, 2010|
|Good build quality (visual feel), compatibility with DDR and DDR2 (just not simultaneously). No PCIe16 slot - but dont mind so much. found that the bouard was easy to instal, and ran with compatablity of all the other hardware.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
E2827 First Edition September 2006
Copyright 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.
Notices.... vii About this guide... ix P5VDC-TVM SE specifications summary.. xi Safety information... viii
Chapter 1: Product introduction
1.1 1.2 1.3
Special features... 1-2. Before you proceed... 1-4 Motherboard overview... 1-5 1.3.1 1.3.2 1.3.3 1.4.1 1.4.2 Placement direction.. 1-5 Screw holes... 1-5 Motherboard layout... 1-6 Installling the CPU... 1-7 Installling the CPU heatsink and fan.. 1-10
Central Processing Unit (CPU).. 1-7
1.4.3 1.5.1 1.5.2 1.5.3 1.5.4 1.5.5 1.5.6 1.6.1 1.6.2 1.6.3 1.6.4 1.6.5 1.6.6
System memory... 1-14 Overview.. 1-14 Memory Configurations.. 1-14 Installing a DDR DIMM (black slots).. 1-15 Removing a DDR DIMM.. 1-15 Installing a DDR2 DIMM (yellow slots). 1-16. Removing a DDR2 DIMM... 1-16 Installing an expansion card.. 1-17 Configuring an expansion card.. 1-17 Interrupt assignments.. 1-18 PCI slots.. 1-19. PCI Express x1 slot.. 1-19. PCI Express x16 slot... 1-19.
Uninstalling the CPU heatsink and fan. 1-12
Expansion slots... 1-20.
Jumpers.... 1-20 Connectors.... 1-22 1.8.1 1.8.2 Rear panel connectors... 1-22 Internal connectors... 1-23
Chapter 2: BIOS setup
2.1 2.2 BIOS setup program... 2-2 BIOS menu screen.. 2-3 2.2.1 2.2.2 2.3 2.2.3 2.3.1 2.3.2 2.3.3 2.3.4 2.3.5 2.3.6 2.3.7 2.4 2.3.8 2.4.1 2.4.2 Legend Box... 2-3 List Box... 2-4 Sub-menu.. 2-4 Date [Day, xx/xx/xxxx].. 2-5 Time [xx:xx:xxxx].. 2-5 IDE Channel 0/1 Master/Slave.. 2-5. SATA Channel 2/3 Master.. 2-7 Drive A [1.44M, 3.5 in.]... 2-8 Video [EGA/VGA]... 2-8. Halt On [All, But Keyboard]... 2-8 Base Memory/Extended Memory/Total Memory [xxxK]. 2-8 CPU Feature [Press Enter]... 2-9 Hard Disk Boot Priority [Press Enter].. 2-10
Standard BIOS Features... 2-5
Advanced BIOS Features... 2-9
2.4.3 2.4.4 2.4.5 2.4.7 2.4.8 2.4.9 2.4.6
Quick Power On Self Test [Enabled].. 2-10 First/Second/Third Boot Device.. 2-10 Boot Other Device [Enabled]... 2-10 Boot Up Floppy Seek [Disabled]..2-11
Boot Up NumLock [On]...2-11 Security Option [Setup]...2-11 OS Select For DRAM > 64MB [Non-OS2]..2-11 HDD S.M.A.R.T. Capability [Disabled]..2-11 Small Logo (EPA) Show [Enabled]..2-11 Video BIOS Shadow [Disabled]..2-11 Current FSB Frequency [200MHz].. 2-12. Current DRAM Frequency [200MHz].. 2-12 DRAM Frequency [Auto].. 2-12 DRAM Timing Selectable [By SPD]. 2-13 Memory Hole [Disabled].. 2-13.
2.4.10 2.4.11 2.5 2.4.12 2.5.1 2.5.2 2.5.3 2.5.4 2.5.5
Advanced Chipset Features.. 2-12
2.5.7 2.6.1 2.6.2 2.7 2.6.3 2.7.1 2.7.2 2.7.3 2.7.4 2.7.5 2.7.6 2.7.7 2.7.8 2.7.9 2.7.10 2.7.11 2.7.12 2.8 2.7.13 2.8.1 2.8.2 2.8.3 2.8.4 2.8.5 2.8.6 2.8.7 2.8.8 2.8.9 2.9 2.8.10 2.9.1 2.9.2 2.5.6 VGA Share Memory Size [64MB].. 2-13. Onchip IDE Device [Press Enter].. 2-14 Onboard Device [Press Enter].. 2-15 Super IO Device [Press Enter].. 2-16 ACPI Function [Enabled].. 2-17. ACPI Suspend Type [S3(STR)]. 2-17. Off by Power Button [Instant-Off].. 2-18 Resume by PCI PME [Disabled]. 2-18 Resume by Ring [Disabled].. 2-18 Resume by USB (S3) [Enabled]. 2-18 Resume by PCI-E Device [Disabled].. 2-18 Resume by Alarm [Diabled].. 2-18 Day (of Month) Alarm .. 2-18 Time (hh:mm:ss) Alarm [0:0:0].. 2-18 Power On By Mouse [Disabled].. 2-19 Power On By Keyboard [Disabled].. 2-19 State After Power Failure [Off].. 2-19 PNP OS Installed [No]... 2-20 Reset Configuration Date [Disabled].. 2-20. Resources controlled By [Auto(ESCD)].. 2-20 IRQ Resources [Press Enter].. 2-21. PCI/VGA Palette Snoop [Disabled].. 2-21 Assign IRQ For VGA [Enabled].. 2-21 Assign IRQ For USB [Enabled].. 2-21 INT Pin x Assignment [Auto].. 2-21 PCI Express relative items.. 2-22 maximum Payload Size .. 2-22 CPU Temperature, MB Temperature.. 2-22 CPU Fan Speed, System Fan Speed.. 2-22 Primary Display Adapter [PCi_E].. 2-13
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet. Place the product on a stable surface. If you encounter technical problems with the product, contact a qualified service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Please check local regulations for disposal of electronic products.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This manual contains the following parts: This chapter describes the features of the motherboard and the new technology it supports. This chapter also lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Chapter 2: BIOS setup This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Chapter 1: Product introduction
Where to find more information
Onboard RAID solution
The onboard VIA VT8237R+ chipset allows RAID 0, RAID 1 and JBOD configuration for four SATA connectors.
USB 2.0 technology
The motherboard implements the Universal Serial Bus (USB) 2.0 specification, dramatically increasing the connection speed from the 12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is backward compatible with USB 1.1. See page 1-23 and 1-28 for details.
The Realtek ALC655 is an AC97 CODEC that allows 6-channel audio playback. The audio CODEC provides six DAC channels for 5.1 surround sound, AUX, and Line In stereo inputs.
ASUS P5VDC-TVM SE
Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
Unplug the power cord from the wall socket before touching any component. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity Hold components by the edges to avoid touching the ICs on them. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.
The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.
P5VDC-TVM SE Onboard LED
ON Standby Power
OFF Powered Off
Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.
Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.
Place eight (8) screws into the holes indicated by circles to secure the motherboard to the chassis.
Power up the system and enter the BIOS Setup (see Chapter 2: BIOS setup). Under the Advanced Menu, make sure that the item HyperThreading Technology is set to Enabled. The item appears only if you installed a CPU that supports Hyper-Threading Technology. Reboot the computer.
Installling the CPU heatsink and fan
The Intel Pentium 4/Pentium D LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.
Install the motherboard to the chassis before you install the CPU fan and heatsink assembly When you buy a boxed Intel Pentium 4 processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, make sure that you use only Intelcertified multidirectional heatsink and fan. Your Intel Pentium 4 LGA775 heatsink and fan assembly comes in a push-pin design and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure that a Thermal Interface Material is properly applied to the CPU heatsink or CPU before you install the heatsink and fan assembly.
To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the motherboard.
Fastener Motherboard hole
Make sure each fastener is oriented as shown, with the narrow groove directed outward.
Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.
B A B A
When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
GND CPU FAN PWR CPU FAN IN CPU FAN PWM
P5VDC-TVM SE CPU fan connector Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard labeled CPU_ FAN. Rotate each fastener counterclockwise.
Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard.
B A A B
Remove the heatsink and fan assembly from the motherboard.
Rotate each fastener clockwise to reset the orientation.
Narrow end of the groove
The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.)
The motherboard comes with two 240-pin Double Data Rate (DDR2) and two 184pin DDR Dual Inline Memory Modules (DIMM) sockets. DDR2 DIMMS are notched differently to prevent installation on a DDR DIMM socket. The following figure illustrates the location of the sockets:
Color Yellow Black Sockets DDR2_A1 and DDR2_B1 DDR_A1 and DDR_B1
DDR2_A1 DDR2_B1 DDR_A1 DDR_B1
P5VDC-TVM SE 240-pin DDR2 DIMM sockets To prevent damage to the motherboard, do not use DDR and DDR2 memory simultaneously. Due to chipset resource allocation, the system may detect less than 2 GB system memory when you installed two 1 GB DDR2 or DDR memory modules.
You may install 256MB, 512MB, and 1 GB unbuffered non-ECC DDR/DDR2 DIMMs into the DIMM sockets.
Installing a DDR DIMM (black slots)
Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 2
DDR DIMM notch
Unlock a DIMM socket by pressing the retaining clips outward.
Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.
Unlocked retaining clip
A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.
Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.
Locked Retaining Clip
Removing a DDR DIMM
Follow these steps to remove a DIMM. Simultaneously press the retaining clips outward to unlock the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.
Remove the DIMM from the socket.
Installing a DDR2 DIMM (yellow slots)
Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components.
To install a DIMM: 1. 2. 3. Unlock a DIMM socket by pressing the retaining clips outward.
DDR2 DIMM notch
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM. The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR DIMMs to the DDR2 DIMM sockets.
Removing a DDR2 DIMM
In the future, you may need to install expansion cards. The following subsections describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
Clear RTC RAM (CLRTC1)
To erase the RTC RAM:
6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure!
Normal (Default) CLEAR
P5VDC-TVM SE Clear RTC RAM
You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.
This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.
Keyboard power (3-pin KBPWR1)
P5VDC-TVM SE Keyboard power setting
Rear panel connectors
Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices.
PS/2 mouse port (green). This port is for a PS/2 mouse.
IEEE 1394a port (optional). This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. LAN (RJ-45) port. This port allows connection to a Local Area Network (LAN) through a network hub.
LAN port LED indications
ACT/LINK LED Status Description OFF Idle BLINKING Data activity SPEED LED Status Description OFF 10 linked GREEN 100 linked
ACT/LINK SPEED LED LED
5. 6. 7.
Line In port (light blue). This port connects a tape, CD, DVD player, or other audio sources. In 4-channel and 6-channel configuration, the function of this port becomes Rear Speaker Out. Line Out port (lime). This port connects a headphone or a speaker. In 4channel and 6-channel configuration, the function of this port becomes Front Speaker Out. Microphone port (pink). This port connects a microphone. In a 6channel configuration, the function of this port becomes Bass/Center Speaker.
Refer to the audio configuration table for the function of the audio ports in 2, 4, or 6-channel configuration.
Audio 2, 4, or 6-channel configuration
Port Light Blue Lime Pink Headset 2-channel Line In Line Out Mic In 4-channel Rear Speaker Out Front Speaker Out Mic In 6-channel Rear Speaker Out Front Speaker Out Bass/Center
USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.
P5VDC-TVM SE SATA connectors
Important notes on Serial ATA The Serial ATA RAID feature (RAID 0, RAID 1, and JBOD) is available only if you are using Windows 2000/2003 Server/XP operation system. The SATA ports couldnt be Book Disk under Windows 98SE and ME. Install the Windows 2000 Service Pack 4, the Windows XP Service Pack1 or later version before using Serial ATA.
These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, MPEG card or modem.
Internal audio connectors (4-pin AUX1, CD1)
Left Audio Channel Ground Ground Right Audio Channel
P5VDC-TVM SE Internal audio connectors
CPU and Chassis fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN1)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors.
P5VDC-TVM SE Fan connectors
This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module.
Digital Audio connector (4-1 pin SPDIF_OUT1)
P5VDC-TVM SE Digital audio connector The S/PDIF out module is purchased separately.
These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up. When using an ATX 12 V PSU with 20-pin power plug, make sure that it can provide 8 A on the +12 V lead and at least 1A on the +5V standby lead (+5 VSB). The minimum recommended wattage is 300 W, or 350 W for a fully configured system. The system may become unstable or may not boot up if the power is inadequate. You must install a Power Supply Unit (PSU) with a higher power rating if you intend to install additional devices.
+3 Volts +12 Volts GND +12V DC +12 Volts +5V Standby Power OK Ground GND +12V DC +5 Volts Ground +5 Volts Ground +3 Volts connectors +3 Volts
P5VDC-TVM SE ATX power
Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts
These connectors are for USB 2.0 ports. Connect the optional USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
USB connectors (10-1 pin USB56, USB78)
USB+5V USB_P6USB_P6+ GND NC
USB+5V USB_P5USB_P5+ GND
P5VDC-TVM SE USB 2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB/GAME module is purchased separately.
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis.
IEEE 1394a port connector (10-1 pin IE1394_1) (Optional)
IE1394_1 P5VDC-TVM SE IEEE 1394a connector
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard! 1-28 Chapter 1: Product introduction
TPA1+ GND TPB1+ +12V
TPA1GND TPB1+12V GND
USB+5V USB_P7USB_P7+ GND
USB+5V USB_P8USB_P8+ GND NC
10. Front panel audio connector (10-1 pin AAFP1)
This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
Azalia-compliant pin definition
GND PRESENCE# SENSE1_RETUR SENSE2_RETUR
Legacy AC97-compliant pin definition
AGND NC NC NC
PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L MIC2 MICPWR Line out_R NC Line out_L
P5VDC-TVM SE Analog front panel connector
11. Chassis intrusion connector (4-1 pin CHASSIS) (Optional)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled Chassis Signal and Ground are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.
GND Chassis Signal +5VSB_MB
P5VDC-TVM SE Chassis intrusion connector
12. Infrared module connector (5-1 pin IR_CON1)
This connector supports an optional wireless transmitting and receiving infrared module. Use a ribbon cable to connect an IR module to this connector.
IRRX GND IRTX +5V
P5VDC-TVM SE Infrared module connector The IR module is purchased separately.
13 Serial port connector (10-1 pin COM2)
This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
Hyper-Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology. Configuration options: [Disabled] [Enabled]
2.4.2 2.4.3 2.4.4
Allows you to select the hard disk boot device priority. The number of devices that appears on the screen depends on the number of devices installed in the system. Configuration options: [Disabled] [Enabled]
Hard Disk Boot Priority [Press Enter] Quick Power On Self Test [Enabled] First/Second/Third Boot Device
Allows you to assign the boot device priority. Configuration options: [Floppy] [LS120] [Hard Disk] [CDROM] [ZIP] [USB-FDD] [USB-ZIP] [USB-CDROM] [LAN] [Disabled]
Boot Other Device [Enabled]
Configuration options: [Disabled] [Enabled]
2.4.6 2.4.7 2.4.8
When [Enabled], the BIOS will seek the flopy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled] Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] This field requires you to enter the password before entering the BIOS setup or the system. Select [Setup] to require the password before entering the BIOS Setup. Select [System] to require the password before entering the system. Configuration options: [Setup] [System]
Boot Up Floppy Seek [Disabled] Boot Up NumLock Status [On] Security Option [Setup]
Configuration options: [Non-OS2] [OS2]
OS Select For DRAM > 64MB [Non-OS2] HDD S.M.A.R.T. Capability [Disabled] Small Logo(EPA) Show [Enabled] Video BIOS Shadow [Disabled]
Enables or disables Hard Disk SMART capability support. Configuration options: [Disabled] [Enabled] Configuration options: [Disabled] [Enabled]
Enables or disables copying of the video BIOS to shadow RAM. Configuration options: [Disabled] [Enabled]
Advanced Chipset Features
The Advanced Chipset Features menu items allow you to change the advanced chipset settings.
Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features
x x x x x
Current FSB Frequency Current DRAM Frequency DRAM Frequency DRAM Timing Selectable CAS Latency Time Bank Interleave Precharge to Active(Trp) Active to Precharge(Tras) Active to CMD(Trcd) Memory Hole Primary Display Adapter VGA Share Memory Size
200MHz 200MHz [Auto] [By SPD] Bank 3T 09T 3T [Disabled] [PCI-E] [64MB]
Select Menu Item Specific Help Support DDR Frequency from 333Mhz to 533Mhz.
2.5.1 2.5.2 2.5.3
This item is not configurable. This item is not configurable.
Current FSB Frequency [200MHz] Current DRAM Frequency [200MHz] DRAM Frequency [Auto]
Sets the DDR/DDR2 operating frequency. Configuration options when installing DDR memory modules: [Auto] [333MHz] [400MHz]; Configuration options when installing DDR2 memory modules: [Auto] [400 MHz] [533MHz]
When this item is set to [By SPD], the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When set to [Manual], you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is set to [Manual]. Configuration options: [Manual] [By SPD]
DRAM Timing Selectable [By SPD]
CAS Latency Time 
Controls the latency between the DRAM read command and the time the data actually becomes available. Configuration options when installing DDR memory modules:  [2.5] ; Configuration options when installing DDR2 memory modules:    
Bank Interleave [4 Bank]
Configuration options: [Disabled] [2 Bank] [4 Bank] [8 Bank]
Precharge to Active (Trp) [3T ]
Configuration options: [2T] [3T] [4T] [5T]
Active to Precharge (Tras) [09T]
Configuration options: [05T] ~ [20T]
Active to CMD (Trcd) [3T]
2.5.5 2.5.6 2.5.7
Allows you to reserve an address for ISA expansion cards. Configuration options: [Disabled] [15M-16M] Configuration options: [PCI] [PCI-E]
Memory Hole [Disabled]
Primary Display Adapter [PCi-E] VGA Share Memory Size [64MB]
Allows you to select the size of VGA Share Memory. Configuration options: [Disabled] [16MB] [32MB] [64MB]
The Integrated Peripherals menu items allow you to change the onboard devices configuration settings.
Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals Onchip IDE Device Onboard Device Super IO Device [Press Enter] [Press Enter] [Press Enter] Select Menu Item Specific Help Onchip IDE Device setup menu.
OnChip IDE Device [Press Enter]
Phoenix - AwardBIOS CMOS Setup Utility Onchip IDE Device
IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDMA SATA Mode
[Auto] [Auto] [Auto] [Auto] [Disabled] [Disabled] [Disabled] [Disabled] [IDE]
Select Menu Item Specific Help Set a PIO mode for the IDE device. Mode0 through 4 successive increase in performance.
Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using standard VGA cards, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled]
PCI/VGA Palette Snoop [Disabled]
2.8.6 2.8.7 2.8.8
Configuration options: [Disabled] [Enabled] Configuration options: [Disabled] [Enabled]
Assign IRQ For VGA [Enabled] Assign IRQ For USB [Enabled] INT Pin x Assignment [Auto]
Assigns INT assignment for specific devices. Configuration options: [Auto]          
PCI Express relative items Maximum Payload Size 
Allows you to set maximum TLP payload size for the PCI Express devices. The unit is byte. Configuration options:      
PC Health Status
The PC Health Status screen shows the motherboard CPU and fan temperatures, and allows you to set threshold levels for efficient system operation.
Phoenix - AwardBIOS CMOS Setup Utility PC Health Status CPU Temperature 41oC MB Temperature 30oC CPU Fan Speed 2191 RPM System Fan Speed 0 RPM VCORE Voltage 1.31 V 3.3V Voltage 2.65 V +5V in 4.35 V +12V in 10.94 V CPU Fan Speed warning[800 RPM] CPU FAN SPEED CONTROL[Enabled] Start Up Temperature (oC) Full Speed Temperature (oC) Start Up PWM Slope Select PWM/C[4 PWM/(oC)] Select Menu Item Specific Help Press [Enter] to enable or disable
The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable. The onboard hardware monitor automatically detects and displays the CPU fan speed and the system fan speed in rotations per minute (RPM). These items are not user-configurable.
CPU Temperature, MB Temperature
CPU Fan Speed, System Fan Speed
The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. These items are not user-configurable.
VCORE Voltage, 3.3 Voltage, +5V in, +12V in
2.9.4 2.9.5 2.9.6
Allows you to disable or set the CPU fan warning speed. Configuration options: [Disabled] [800RPM] [1200RPM] [1600RPM] Allows you to enable or disable the CPU fan speed controller. Configuration options: [Disabled [Enabled]]
CPU Fan Speed warning [800RPM]
CPU FAN SPEED CONTROL [Enabled] Start Up Temperature (oC) 
To set the start up temperature, highlight this item and press <Enter> to display a pop-up menu. Key in a value (Min=0, Max=100), then press <Enter>. The fan will start up when the temperature is over the value set.
To set the full speed temperature, highlight this item and press <Enter> to display a pop-up menu. Key in a value (Min=0, Max=100), then press <Enter>. The fan will achieve full speed when the temperature is over the value set.
Full Speed Temperature (oC) 
To set the start up PWM, highlight this item and press <Enter> to display a pop-up menu. Key in a value (Min=0, Max=127), then press <Enter>. Allows you to set PWM increase value when the temperature is one degree higher. Configuration options: [0 PWM/oC] [1 PWM/oC] [2 PWM/oC] [4 PWM/oC] [8 PWM/ o C] [16 PWM/oC] [32 PWM/oC] [64 PWM/oC]
Start Up PWM 
Slope Select PWM/C [4 PWM/oC]
2.10 Frequency/Voltage Control
The Frequency/Voltage Control menu items allow you to change the CPU clock and voltage settings.
Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Spread spectrum [Enabled] Select Menu Item Specific Help Enable/Disable Spread Spectrum.
Allows you to enable or disable the clock generator spread spectrum. Configuration options: [Disabled] [Enabled]
Spread Spectrum [Enabled]
2.11 Other items
2.11.1 2.11.2 2.11.3 2.11.4 2.11.5
Allows you to load the fail-safe defaults.
Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup
Allows you to load the optimized defaults.
Allows you to set the supervisor password. To set a password, press <Enter>. Type in and confirm the password when prompted. Allows you to set a user password for access to system after boot-up. This item is not configurable. Once you are finished making your selections, choose this option to ensure that the values you selected are saved to the CMOS RAM. When you select this option, a confirmation window appears. Select Yes to save changes and exit.
Select this option only if you do not want to save the changes that you made to the Setup program.
Exit Without Saving
Inspiron 1520 D-VR7 EKC513505W ELP-505 DCR-HC37E Command Proel M-8 CFX-9950GB Plus LT412 14PV340 Green FAX-1840C SL-J905 Nitefly Software SC-HT75 I815E SEW-eurodrive 108 MP 7500 ASI66011K Futaba 7C RCD-1520 DNC 65 GX-625 System Trainer Game PSR-2000-PSR-1000 Coreldraw 10 37AM-23H WIM 2000 Oslo 502 SF-6800P CMS 2200 Roadmate 3055 Radar Bizhub C452 Touch 556 QT5000FX4 Abit NV7M IR7105 Chronographstopwatch VD55 Coolpix L19 Famosa I 1400 RR-QR240 Neronet Vixia HG21 WHP150 MP0804H SCC 2491D200A Taav531 KX-TG1100CX ERE3500 PLG100-XG KH 3461 Moviefactory 5 PS-5000 D Routes CM62 BLK JX 200 CDE-7826E SRU5030-87 X203N Utopia BE WJ-MP204C Ecoroute HD SV-640F Ducati 749 26LH1DC1 20 HBK ICF-C743 Psr-1500 HDR-SR8 SST4272 TX-28DK1F DVW-A500 Chalugaz Siemens C56 Descriptif KDL-32W4220 KDL-32V5610 MT18AH Printer CDM-7835R CP-S860W KV-21CT1E HT-DB750M Sub 300 DEH-P9450MP PMA-510AE Prism Review LE26R51BD 5062AF YP-T10 WD10000H1NC 49G RM212F KX-TGA711E LVP-X80U M3701C-BA
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101