E3949 V1

August 2008

VK266/VW266 Series

LCD Monitor

User Guide

Table of contents

Notices.... iii Safety information.... iv Care & Cleaning... v

Chapter 1:

1.1 1.2 1.3 1.5.
Welcome! ... 1-1 Package contents... 1-1. Assembling the monitor base.. 1-2 Monitor 1.5.1 1.5.2 Front of the LCD monitor.. 1-3 Rear of the LCD monitor.. 1-4... 1-3

Product introduction

Chapter 2:

2.1 2.2 3.1

Detaching the arm/stand (for VESA wall mount).. 2-1 Adjusting the monitor.. 2-2 OSD (On-Screen Display) menu.. 3-1 3.1.1 3.1.2 How to reconfigure... 3-1 OSD Function Introduction... 3-1.

Chapter 3:

General Instruction

3.2 3.3 3.4 3.5

Specifications summary... 3-4 Troubleshooting (FAQ)... 3-5 Supported operating modes... 3-6 HDMI Supported Primary Timings.. 3-7
Copyright 2008 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe.

Notices

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device must accept any interference received including interference that may cause undesired operation. This device may not cause harmful interference, and
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star Partner, our company has determined that this product meets the Energy Star guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

Safety information

Before setting up the monitor, carefully read all the documentation that came with the package. Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. To prevent fire or shock hazard, never expose the monitor to rain or moisture.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided. The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. Use the appropriate power plug which complies with your local power standard.
Do not overload power strips and extention cords. Overloading can result in fire or electric shock. Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges. Never push objects or spill liquid of any kind into the slots on the monitor cabinet. To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC. If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.

Care & Cleaning

Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The following symptoms are normal with the monitor:
When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task.
Where to find more information
Refer to the following sources for additional information and for product and software updates. 1. The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Your product package may include optional documentation, such as warranty card, that may have been added by your dealer. These documents are not part of the standard package. Optional documentation ASUS websites

Welcome!

Thank you for purchasing the ASUS VK266/VW266 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VK266/VW266 Series brings you!

Package contents

Check your VK266/VW266 Series LCD package for the following items: LCD monitor Monitor base 1 x CD Quick Start Guide 1 x Power cord 1 x VGA cable 1 x WebCam USB cable (Only for some models) 1 x DVI cable (Only for some models) 1 x Audio cable
If any of the above items is damaged or missing, contact your retailer immediately.
ASUS LCD Monitor VK266/VW266 Series

Assembling the monitor base
To assemble the monitor base: Connect the base with the monitor. A click indicates that the base has been connected successfully. Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

Connect cables

To connect cables: Remove back cover by hand carefully. Connect cables which you need base on chapter 1.5.2, Page1-4.
Chapter 1: Product introduction

Monitorintroduction

FrontoftheLCDmonitor
Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only). Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID Video Enhancement Technology. Exit the OSD menu or go back to the previous menu as the OSD menu is active. Button:

button:

Press this button to decrease the value of the function selected or move to the next fuction. This is also a hotkey for Volume adjustment.
MENU Button: Press this button to enter/select the icon (function) highlighted while the OSD menu is activated. Press this button to increase the value of the function selected or move to the previous fuction. This is also a hotkey for Brightness adjustment. Input Select Button Use this hotkey to switch from VGA,DVI,HDMI, Component input signal. (for some models) Button:
Press (Input Select Button) to display HDMI and component signals after you connect cable with monitor.
ASUS LCD Monitor VK266/VW266 Series 1-3
Power button Press this button to turn the monitor on/off. Power indicator Thecolordefinitionofthepowerindicatorisasthebelowtable.
Status Blue Amber OFF Description ON Standby mode OFF
1.5.2 RearoftheLCDmonitor
Screwholesfor VESAWallMount

Rearconnectors 5 7

AC-INport HDMI-INport DVIport VGAport YPbPr Ports + L/R Audio Ports Line - in Port Earphone - out Port USB-IN port (Only for some models)

SPDIF Out Port Of HDMI

Detaching thearm/stand (for VESA wall mount)
The detachable stand of the VK266/VW266 Series LCD monitor is specially designed for VESA wall mount. To detach the arm/stand:. 2. 3. 4. Remove the back cover by hand carefully. Remove the arm cover by hand carefully.
Detach the arm from the monitor.
Have the front of the monitor face down on a table carefully. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows.
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. Hold the stand of the monitor when you remove the screws.

3 screws

The VESA wall mount kit (00 mm x 00 mm) is purchased separately. For use only with UL Listed Wall Mount Bracket with minimum weight/load 7.9 Kg (Screw size: 4mm x 12 mm)

Adjusting themonitor

For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. Hold the stand to prevent the monitor from falling when you change its angle. You can adjust the monitors angle from -5 to 20.
Install Life-Frame 2 software
ASUS VK266 series provides the easy-to-use LifeFrame 2 software that can work with the webcam,allowing users to create their own photos or video clips.
LifeFrame 2 only supports Microsoft Windows Vista/XP Service Pack 2 operating systems. The LifeFrame 2 software is bundled in the support CD.
Installation instructions
1. Close all other applications. 2. Insert the support CD into the optical drive and run the LifeFrame 2 program. 3. Follow the on-screen instructions to complete the installation.

Chapter 2: Setup

OSD (On-Screen Display) menu

How to reconfigure

Press the MENU button to activate the OSD menu.
2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. To exit the OSD menu, press the adjust any other function. Press and to change the settings of the selected function. button. Repeat step 2 and step 3 to
OSD Function Introduction
Spendid This function contains five sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. Scenery Mode: best choice for scenery photo display with SPLENDID Video Enhancement. Standard Mode: best choice for document editing with SPLENDID Video Enhancement.

Theater Mode: best choice for movie with SPLENDID Video Enhancement. Game Mode: best choice for game playing with SPLENDID Video Enhancement. Night View Mode: best choice for dark-scene game or movie with SPLENDID Video Enhancement.
In the Standard Mode, the Satuation and ASCR functions are not user-configurable. In the other modes, the sRGB function is not user-configurable. 3-
You can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. P1 P2
Brightness: the adjusting range is from 0 to 100. activate this function. Contrast: the adjusting range is from 0 to 00. Sharpness: the adjusting range is from 0 to 100.

is a hotkey to

ASCR:Select YES or NO to enable or disable dynamic contrast ratio function. (for some models) Over Drive:To speed up the respense time by Over drive technology. the adjusting range is from 0 to 00(for some models)
Saturation: the adjusting range is from 0 to 100.
Position: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100. Focus: reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100.
Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.
Color Select the image color you like from this function.
Chapter 3: General Instruction
Color Temp.: contains five color modes including Cool, Normal, Warm, sRGB, and User mode.
Skin Tone: contains three color modes including Reddish, Natural, and Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Bluee) are userconfigurable; the adjusting range is from 0-00.

Input Select

In this function, you can select VGA,DVI,HDMI, YPbPr input source. (Only for some models)

System Setup

Allow you to adjust the system.
Volume: the adjusting range is from 0 to 100. this function.

is a hotkey to activate

OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the OSD. The adjusting range is from 0 to 100. In the OSD Timeout selection, you can adjust the OSD timeout from 10 to 120.
Language: there are ten languages for your selection, including English, German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese, and Korean. Aspect Controls: adjusts the aspect ratio to Full or 4:3. (for some models) Information: shows the monitor information. Reset: Yes allows you to revert to the preset mode.

Panel Size

Specifications summary
For VK266/VW266 series models

VK266H

25.5"W 1920x1200 300cd/ 1000:1 160(V) ; 170(H) 16.7 M(6bit Hi FRC) 2ms (Gray to Gray) 2.0M 3W x 2 stereo Yes Yes Yes DVI with HDCP Yes Yes Yes 85W +25 ~ -5 596x461x240 693x528x206 7.9 11.1 AC:100~240V(Built-in)

VW266H

25.5"W 1920x1200 300cd/ 1000:1 160(V) ; 170(H) 16.7 M(6bit Hi FRC) 2ms (Gray to Gray) 3W x 2 stereo Yes Yes Yes DVI with HDCP Yes Yes Yes 85W +25 ~ -5 596x449x240 693x528x206 7.9 11.1 AC:100~240V(Built-in)
Max. Resolution Brightness (Max.) Intrisinc Contrast Ratio (Max.) Viewing Angle (CR=10) Display Colors Response Time Webcam (built-in) Satellite Speaker Earphone Output Sound from HDMI HDMI input DVI input D-Sub input Audio Line-in RCA 3x2(YPbPr, R/L, SPIDIF) Power ON Consumption Tilt VESA Wall Mounting Phys. Dimension (WxHxD) Box Dimension (WxHxD) Net Weight (Esti.) Gross Weight (Esti.) Voltage Rating
Yes (100mm x 100mm) Yes (100mm x 100mm)
*Specificationsaresubjecttochangewithoutnotice.

Troubleshooting (FAQ)

Problem Possible Solution

Power LED is not ON

Press the button to check if the monitor is in the ON mode. Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no Check if the monitor and the computer are screen image in the ON mode. Make sure the signal cable is properly connected the monitor and the computer. Inspect the signal cable and make sure none of the pins are bent. Connect the computer with another available monitor to check if the computer is properly working. Screen image is too light or dark Adjust the Contrast and Brightness settings via OSD. Screen image is not centered or sized Press the A button for two seconds to properly automatically adjust the image. Adjust the H-Position or V-Position settings via OSD. Screen image bounces or a wave pattern is Make sure the signal cable is properly present in the image connected to the monitor and the computer. Move electrical devices that may cause electrical interference. Screen image has color defects (white does Inspect the signal cable and make sure that not look white) none of the pins are bent. Perform Reset via OSD. Adjust the R/G/B color settings or select the Color Temperature via OSD. Screen image is blurry or fuzzy Press the A button for two seconds to automatically adjust the image (for VGA mode only). Adjust the Phase and Clock settings via OSD. No sound or sound is low Ensure that the audio cable is properly connected to the monitor and the computer Adjust the volume settings of both your monitor and computer. Ensure that the computer sound card driver is properly installed and activated. Webcam is not working Make sure that you have connected the USB 2.0 cable securely to both the LCD monitor and your computer. Make sure that you use the Microsoft Windows Vista/XP Service Pack 2 operation systems.

3.4 VK266/VW266 PC Supported Timing List
VESA Modes, Factory Preset Timings
Input Resolution Aspect Ratio 4:3 640x480,60Hz 640x480,72Hz 640x480,75Hz 640x480, 85Hz 800x600,56Hz 800x600,60Hz 800x600,72Hz 800x600,75Hz 800x600,85Hz 1024x768,60Hz 1024x768,70Hz 1024x768,75Hz 1024x768,85Hz 1152x864,75Hz 1280x960,60Hz 1280x1024,60Hz 1280x1024,75Hz 1440x900,60Hz 1440x900,75Hz 1680x1050,60Hz 1920x1080, 60Hz 1920x1200,60Hz

H(KHz)

Pixel(MHz)
31.469 37.861 37.5 43.269 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 68.677 67.63.981 79.976 55.935 70.635 65.29 67.5 74.038
59.94 72.85.008 56.25 60.317 72.85.061 60.004 70.069 75.029 84.60 60.02 75.025 59.887 79.984 59.59.95
25.175 31.5 31.50 49.5 56.75 78.75 94.135 106.5 136.75 146.25 148.5 154

4:3 5:4

WXGA+ WSXGA 1080P WUXGA

16:10 16:10 16:9 16:10

IBM Modes, Factory Preset Timings(D-SUB, DVI-D, HDMI inputs)

DOS DOS

Input Resolution Aspect Ratio 640x350, 70Hz 640x350,85Hz 720x400, 70Hz 720x400,85Hz Input Resolution Aspect 4:3 640x480, 67Hz 4:3 832x624, 75Hz Input Resolution Aspect 16:9 1280x720, 60Hz 16:9 1280x720, 75Hz 1280x768, 60Hz 1280x768, 75Hz 16:10 1280x800, 60Hz 16:10 1280x800, 75Hz 16:9 1920x1080, 60Hz
31.469 37.861 31.469 37.927 H(KHz) 35 49.725 H(KHz) 44.772 56.456 47.776 60.289 49.702 62.795 66.587
70.087 85.08 70.087 85.039 V(Hz) 66.667 74.551 V(Hz) 59.855 74.777 59.87 74.893 59.81 74.934 59.934

25.175 31.5 28.322 35.5

MAC Modes, Factory Preset Timings(D-SUB, DVI-D, HDMI inputs)
Mode VGA SVGA Mode 720P WXGA+

30.24 57.2832

VESA Modes, User Available Timings
74.5 95.75 79.5 102.25 83.5 106.5 138.5
VK266H / VW266H HDMI Supported Primary Timings
Mode Input Aspect 4:3 480i 16:9 4:3 480P 4:3 16:9 576i 576P 720P 4:3 16:9 4:3 16:9 16:9 16:9 16:9 1080i 16:9 Resolution H(KHz) V(Hz) Pixel(MHz) 27 /27./27.027 25.175/25./27./27.27 74.25 74.176/74.25 74.25 74.176/74.25 720(1440)x480i 15.734/ 59.94 / 60 15.75 59.94/60 Hz 720(1440)x480i 15.734/ 59.94 / 60 15.75 59.94/ 60 Hz 31.469/31.5 640x480P 59.94/60 59.94 / 60 Hz 720x480P 31.469 / 59.94 / 60 31.5 59.94 / 60 Hz 720x480P 59.94 / 60 Hz 1440x576i, 50 1440x576i, 50 720x576P, 50Hz 720x576P, 50Hz 1280x720P, 1280x720P 59.94 / 60 Hz 1920x1080i, 1920x1080i 59.94/ 60 Hz 31.469 / 31.5 15.625 15.625 31.25 31.25 37.5 59.94 / 50 50

44.955/45 59.94/60 28.125 33.716/ 33.59.94/60
VK266H/VW266H HDMI Supported Optional Timings
Mode Input Aspect 4:3 480P 16:9 576P 4:3 16:9 16:9 1080P 16:9 Resolution H(KHz) V(Hz) 59.94/60 59.94/59.94/60 Pixel(MHz) 54/54.054 54/54.54 148.5 148.352/ 148.5 31.469/ 1440x480P 31.5 59.94/ 60 Hz 31.469/ 1440x480P 31.5 59.94 / 60 Hz 31.25 1440x576P, 50Hz 1440x576P, 50Hz 31.25 1920x1080P, 56.25 50Hz 1920x1080P, 67.433/67.5 59.94 /60 Hz
VK266H/VW266H YPbPr Input List
Mode 480i 480P 576i 576P Input Aspect 4:3 4:3 4:3 4:3 16:9 720P 16:9 16:9 1080i 16:9 16:9 1080P 16:9 Resolution 720x480i 59.94 Hz 720x480P 60 Hz 720x576i 50 Hz 720x576P 50Hz 1280x720P 50Hz 1280x720P 59.94/60 Hz 1920x1080i 50Hz 1920x1080i 59.94 Hz 1920x1080P 50 Hz 1920x1080P 59.94/60 Hz H(KHz) 15.734 31.5 15.625 31.25 37.5 44.955/45 28.125 33.716/ 33.75 56.25 67.432/ 67.5 V(Hz) 59.50 Pixel(MHz) 13.13.74.25

59.94/60 74.176/74.74.25

59.94/60 74.176/74.59.94/60 74.25 148.5
*Modesnotlistedintheabovetablesmaynotbesupported.Foroptimalresolution,werecommend thatyouchooseamodelistedintheabovetables