Compatibility Information: Audi Phone Preparation with Bluetooth and Apple iPhone
Apple iPhone Version: 1.0.1 (1C25)* Carrier: AT&T Audi Phone Preparation with Bluetooth From MY 2006: Audi A3, A4/S4/Cabriolet, A6 and A8 From MY 2007: Audi Q7, S6, S8, RS4 From MY 2008: Audi TT, RS4 Cabriolet, R8 and A5/S5
* Please update your iPhone using iTunes if you have an older Firmware version. To find the software version on your iPhone go to Settings General About

Pairing instructions:

In your Audi: - Turn ignition on. The Audi Phone Preparation will be visible for 5 minutes and while the vehicle is stationary. On the Apple iPhone: - Go to the Bluetooth menu Settings General Bluetooth - The iPhone will display a list of available Bluetooth-device(s) - Select Audi UHV xxxx (xxxx = 4-digit number) - Enter the 4-digit Bluetooth-PIN-code on your iPhone within 30 seconds (default is 1234 if not changed in the MMI setup menu) - Select Connect to establish the hands-free connection between the iPhone and the car.

Delete Pairing:

In your Audi with Phone Preparation with Bluetooth: - Remove Bluetooth devices - SETUP Telephone settings Bluetooth settings Remove Bluetooth devices select Yes On the Apple iPhone: - Select Audi UHV xxxx from the list and select Unpair
Phonebook and call lists: After the hands-free connection is established, the Audi Phone Preparation will transfer the phonebook and the call lists stored on the iPhone.*
* A maximum of 1000 numbers can be shown on the Audi MMI A maximum of 500 numbers can be shown on the Audi Navigation plus (RNS-E) Transfer can up to 5 minutes depending on the phonebook size
Known limitations: #1: After initiating and ending a call, a sporadic buzz noise may occur. #2: With Wi-Fi turned on the iPhone hands-free audio may sound distorted. Solution: Turn Wi-Fi off Settings Wi-Fi turn Wi-Fi OFF #3: If the phone ringer is set to silent there is also no ring tone audible in the car for incoming calls (MY2006 vehicles only). #4: Contacts with international numbers stored on the iPhone with a leading + (example: +49) cannot be dialed using the Audi Phone Preparation. Solution: Store all numbers with full international access code (example: 01149) #5: International calls cannot be dialed directly out of the call lists (received, missed, dialed calls) on the Audi Phone Preparation. Solution: Choose the number from a call list and add the leading + manually using the central MMI control button.

Audi music interface

The Audi music interface offers a marketleading, unique and intelligent integration with the iPhone. The main iPhone iPod menu structure will be displayed on the MMI screen. The central control knob on the MMI panel, or the multifunction steering wheel controls, may be used to easily navigate through playlists, albums, artists, etc. The Audi music interface also charges the iPhone battery while it is connected. Accessory message pop-up After you connect your iPhone via the supplied iPod adapter cable, a message popup will be shown on the iPhone display. After approx. 15 seconds the pop-up will disappear automatically or choose No. This message has no effect on functionality.

Copyright 2007 Apple Inc. All rights reserved. Apple, the Apple logo, iPod, iPhone and iTunes are trademarks or registered trademarks of Apple Inc. Audi of America, Inc. and Audi Canada believe the information presented to be correct at the time of publication. All specifications are subject to revision. Check the www.audiusa.com or www.audicanada.ca websites regularly for updates to this document. Bluetooth is a registered trademark of the Bluetooth SIG, Inc.