ACD-16 Pro & ACD-16 TRMS Pro 1000A Data-Logging Clamp-on Multimeters

ACD-16 TRMS Pro

Need the perfect tool to troubleshoot a system? The ACD-16s provide a full range of measurements, enhanced with data logging capabilities, to catch what the eye cant see. Double the efficiency, with an optional PC interface kit. TRMS & Backlight Screen (ACD-16 TRMS Pro only) Measurements: AC/DC Voltage up to 600V, AC Current up to 1000A, Resistance, Frequency and Temperature Data-logging 5400 points Optional PC interface capability (RS-232 KIT2) Audible continuity Auto power off Automatic polarity Low battery indication FEATURES ACD-16 Pro ACD-16 TRMS Pro Data hold Large, easy to read LCD display Accommodates conductors up to 1.77 (45mm) in diameter Carrying case, thermocouple, test leads, batteries (installed) and user manual included Voltage overload protection for all functions up to 600V AC/DC Safety CAT III 600V ACCURACY
+/-(1.0% Rdg + 5 LSD) @ 50 and 60Hz +/-(0.5% Rdg + 5 LSD) +/-(1.0% Rdg + 5 LSD) @ 50 / 60 Hz +/-(1.0% Rdg + 6 LSD) +/-(0.5% Rdg +4 LSD) +/-(2.0% Rdg + 6F) +/-(2.0 % Rdg + 3C)
TRMS Measuremaent AC Current DC Voltage AC Voltage Resistance Frequency Temperature
N/A Yes 40.0 / 400.0 / 1000 A 600.0V 600.0V 999.9 Ohms 5.00Hz to 500.0Hz -58 F to 572 F (-50 C to 300 C)
OPTIONAL ACCESSORIES PC Interface kit (PC connection cable with software) Line splitter (Energizer) 5000A Clamp-on Current Transformer (50 to 1) 3000A Clamp-on Current Transformer (50 to 1) Dual input Thermocouple adapter with two thermocouples -50F to 600F Alligator Clips (For test leads)
PART NUMBER RS-232 KIT2 A47L CT50-1 CT50-2 DKTA-620 and two of TPK-56 VRC-320

REPLACEMENT PARTS

(supplied with product)
PART NUMBER TPK-59 SV-U www.AMPROBE.com
Test leads with set of alligator clips MTL-90B (alligator clips are not supplied with product) Thermocouple Carrying case Instruction Manual

www.AMPROBE.com

GENERAL SPECIFICATIONS Relative Humidity: Maximum relative humidity 80% for temperature up to 31C decreasing linearly to 50% relative humidity at 40C Altitude: Operating below 2000m Storage Temperature: -20C to 60C, < 80% R.H. (with battery removed) Temperature Coefficient: nominal 0.15 x (specified accuracy)/ oC @(0C -18C or 28C -40C), or otherwise specified Sensing: Average sensing for model; True RMS sensing for model Safety: Meets IEC61010-2-032(1994), EN61010-2 032(1995), UL3111-2032(1999).Category III 600 Volts AC & DC Transient protection: 6.5kV (1.2/50 s surge) for all models Pollution degree: 2 E.M.C.: Meets EN61326(1997, 1998/A1), EN61000-4-2(1995), and EN61000-4-3(1996) In an RF field of 3V/m: Total Accuracy = Specified Accuracy + 45 digits Performance above 3V/m is not specified Overload Protections : ACA Clamp-on jaws: AC 1000A RMS continuous + & COM terminals (all functions): 600VDC/VAC RMS Power Supply: standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 Power Consumption: Voltage & ACA functions: 3.5mA typical Ohm & Temperature functions: 4mA typical APO Timing: Idle for 16 minutes APO Consumption: 10 A typical Dimension: L224mm X W78mm X H40mm Weight: 224 gm approx Jaw opening & Conductor diameter: 45mm max Special features: Display Backlight (ACD-16 TRMS) Auto-Hold; Display Hold; On screenstandalone Hi-Lo logging (5400 minutes) at sampling speed of faster than: 20 per second for Voltage & ACA functions 4 per second for Ohm & Temperature functions 2 per second for Hz function Accessories: Test leads (MTL-90B), batteries installed, user's manual, TPK-59 banana plug type-K thermocouple & soft carrying pouch Optional accessories: RS-232 KIT2 interface kit. Electrical Specifications: Accuracy is (% reading digits + number of digits) or otherwise specified, at 23 C 5 C & less than 75% R.H. True RMS Models ACD-16TRMS ACV & ACA clamp-on accuracies are specified from 5% to 100% of range or otherwise specified. Maximum Crest Factor are as specified below, & with frequency spectrums, besides fundamentals, fall within the meter specified AC bandwidth for non-sinusoidal waveforms. Fundamentals are specified at 50Hz and 60Hz. AC Voltage RANGE 50Hz / 60Hz 600.0V Accuracy 1.0% + 5d 1.5% + 5d Temperature RANGE -50C ~ 300C Accuracy 1) 2.0% + 3C

45Hz ~ 500Hz 600.0V

500Hz ~ 3.1kHz 9 (ACD-16 TRMS only) 600.0V 2.5% + 5d
Type-K thermocouple range & accuracy not included
-58F ~ 572F 2.0% + 6F 1) Add 3C (or 6F) to specified accuracy @ -20C ~ -50C (or @ -4F ~ -58F) ACA Current (Clamp-on) RANGE
CMRR: >60dB @ DC to 60Hz, Rs=1k Input Impedance: 2M , 30pF nominal True RMS models Crest Factor: < 2.3 : 1 at full scale & < 4.6 : 1 at half scale

DC Voltage RANGE 600.0V

50Hz / 60Hz 40.00A, 400.0A, 1000A 1.0% + 5d 45Hz ~500Hz 40.00A, 400.0A 1000A 2.0% + 5d 2.5% + 5d

Accuracy 1) 2) 3)

NMRR: >50dB @ 50/60Hz CMRR: >120dB @ DC, 50/60Hz, Rs=1k Input Impedance: 2M , 30pF nominal

Accuracy 0.5% + 5d

500Hz ~ 3.1kHz (ACD-16TRMS Pro only) 40.00A, 400.0A 2.0% + 5d 1000A 2.5% + 5d

RANGE 999.9

Open Circuit Voltage: 0.4VDC typical Audible Continuity Tester Audible threshold: between 10 and 300. Response time: 250 s

Accuracy 1.0% + 6d

Frequency

RANGE 5.00Hz ~ 500.0Hz

Sensitivity (Sine RMS) 40A range: > 4A 400A range: > 40A 1000A range: > 400A 600V range: > 30V

Accuracy 0.5%+4d

True RMS models Crest Factor: < 2.5 : 1 at full scale & < 5.0 : 1 at half scale for 40.00A & 400.0A ranges < 1.4 : 1 at full scale & < 2.8 : 1 at half scale for 1000A range 1) Add 8d to specified accuracy while reading is below 10% of range 2) Induced error from adjacent current-carrying conductor: < 0.06A/A 3) Specified accuracy is for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position errors introduced are: Add 1% to specified accuracy for measurements made WITHIN jaw marking lines (away from jaw opening) Add 4% to specified accuracy for measurements made BEYOND jaw marking lines (toward jaws opening)
Miramar, FL 33025 Toll Free: 800-327-5060 Phone: 954-499-5400 Fax: 866-287-7222 www.Amprobe.com