Always use authorized Audiovox accessories and optional devices when operating this cellular phone, as the use of incompatible auxiliary equipment could result in fire, electric shock or other bodily injury. The use of unauthorized accessories will also void your Warranty.

Protection of Children

Never allow children to play with your phone, as they might hurt themselves or others (e.g., by poking themselves or others in the eye with the antenna).
Always keep all accessories and components out of the reach of small children. Small parts, in particular, might present a choking hazard to children.

Use in Vehicles

Never store or transport flammable liquids, gases or explosive materials in the same compartment as the phone or any of its accessories, as possible sparking in the equipment could ignite a fire or explosion.
Always secure the phone in its holder, when it is not in use. Never place the phone on the passenger seat or anyplace else in the car where it can become a projectile during a collision or sudden stop.
Safe Operation of Your Phone (continued)

CAUTION

Never expose this phone to high temperatures, such as those found near a heater or in a closed car parked in the sun. This can cause heat-damage to the plastic parts, the electronic components and the battery.
Never drop this phone or subject it to violent impact or shock. This can cause mechanical damage.
Never allow any liquids to spill on this phone or expose it to rain, water or moisture. This can cause corrosion damage.
Never store this phone in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phones electronic circuit board.
Never use harsh chemicals, cleaning solvents, or strong detergents to clean this phone. Always clean it with a soft cloth that has been slightly dampened in a mild soap-and-water solution.
Never paint this phone. This can clog the moving parts.
Before connecting this cellular phone or any of its accessories to any other device, always read the Instruction Manual for that other device first to obtain detailed safety instructions. Never connect this cellular phone to any unauthorized or incompatible auxiliary product that has not been expressly approved by Audiovox.
Safe Operation of Battery Pack
Never short-circuit a battery pack by either accidentally or intentionally bringing the terminals in contact with another metal object. That could result in burns, other bodily injury or a fire, and could also damage the battery pack.
Never expose the terminals of the battery pack to any other metal object. Always wrap it or place it in a plastic bag, whenever transporting it.

Body-worn Operation

This device was tested for typical body-worn operations with the BC-9100 belt-clip and LB-9100 holster models, offered by Audiovox as an accessory to this phone, and found to comply with FCC RF exposure requirements. Third-party belt-clips, holsters and similar accessories should be avoided, as they have not been tested and may not comply with FCC RF exposure limits.
For more information about RF exposure, please visit the FCC website at www.fcc.gov.

PHONE OPERATION

Normal position: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
Tips on Efficient Operation:
For your phone to operate most efficiently: Extend your antenna fully. Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

DRIVING

Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: Give full attention to driving driving safely is your first responsibility. Use hands-free operation, if available. Pull off the road and park before making or answering a call if driving conditions so require.

ELECTRONIC DEVICES

Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: Should ALWAYS keep the phone more than six (6) inches from their pacemaker when the phone is turned ON. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider [or call the customer service line to discuss alternatives].

In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
SYSTEM CONFIGURATION SYSTEM CONFIGURATION
System configuration and the equipment list are as shown below.

Retractable Whip Antenna

1 Handheld Portable Telephone 2 Lithium Ion Battery Pack

3 AC Adapter

List of Equipment
Name of the Equipment Handheld Portable Telephone Lithium Ion Battery Pack (BTR-9100) AC Adapter (CNR-9100)
BATTERY INSTALLATION BATTERY INSTALLATION AND RECHARGING AND RECHARGING
To Attach the Battery Pack
1. Press and slide the battery cover to remove it.
2. Place the BTR-9100 battery pack in the battery cavity so that it fits over the connector.

Connector

3. Slide the cover back to snap it on.
To Detach the Battery Pack

1. Press and hold key to

turn the phone off. Then press and slide the battery cover to remove it. 2. Lift the battery pack up to take it out.

To Recharge Battery

Your CDM-9100 phone has a built-in charger function. To recharge the Battery Pack, always install the Battery Pack to the phone. 1. Attach the BTR-9100 Battery Pack to the phone. 2. If the phone is on with the press and hold indicator displayed, to turn the phone off.
3. Insert the connector of the CNR-9100 AC Adapter to the phone connector. 4. Plug the AC Adapter to AC120V outlet. 5. Then the recharging starts. The phone displays Now Charging with animation and the indicaNow Charging
tor scrolling. It also lights the Charging Indicator at the top of the phone. 6. When recharging is completed, the phone displays Fully Charged. 7. Disconnect the AC Adapter from the outlet. 8. To disconnect the AC Adapter from the phone, hold the buttons to unlatch and pull the connector off. The recharging time, from empty to full, depends on the environmental temperature, 0 to +35 C. Battery Type Lithium Ion Battery Pack (BTR-9100) Recharging Time 1.5 to 2 h

To Enter a Second Number

Example: 1. Recall the number stored in the memory address.

2. Press Modify.

View Number Modify Move
4. Press the key under Menu and scroll to Dual Entry.

5. Press serted.

The Dual Mark \ is in6. Enter the second number.
7. Press the key under STO three times.

Address: Original:12

8. Press the key under STO to store in the original address.

Stored 90 Empty 9 Used

To Move Numbers and Names
You can move the phonebook contents to a new address. The original address will then be erased. Example: 1. Recall the number stored in the address 20.

Audiovox

2. Press Move.

View E-mail Modify Move

Move to: Auto:05

4. Enter a new address 1

5 JKL.

Moved 90 Empty 9 Used

To Change Priority of Dual Numbers
You can interchange the primary and the secondary numbers in a phonebook address. The submenu Priority will only be available when two telephone numbers are stored in that address. Example: 1. Recall the number.
08 123-456-7890 987-654-3210

2. Press Priority.

Modify Move Priority
Priority Change 123-456-7890 987-654-3210

Change OK

4. Press the key under Change. The new priority is displayed. 5. Press
Priority Change 987-654-3210 123-456-7890

to decide it.

Note: The primary number will be dialed when you use Speed Dialing and Quick Dialing features.
To Erase Numbers and Names
This feature erases the number already stored in the phonebook. Example: 1. Recall the number.

16 123-456-7890

2. Press Erase.

Modify Move Erase

. The number is shown again.

Erase? Yes No

4. Two seconds later the screen is changed.
5. To erase the number scroll to Yes, otherwise No, and press

Secret Memory

To Store a Secret Number
This feature permits you to store a phone number or email address that you want to keep secret in your phonebook. The secret number can be accessed only by entering the security code (see page 69). Example: To store the phone number in address 30 as a secret number. 1. Enter 1

Message Indicator

A message indicator displays the current state of received messages at the upper right of the screen. Flashing Steady off You have new Text Messages or new Voice Mail Notification. You have Text Messages or Voice Mail Notification, which you have seen already. Neither Text Message nor Voice Mail Notification.

Message Menu

The Message main menu appears by pressing.
Message Send Message Inbox Outbox Voice Mail
Send Message: To create and send message. Inbox: To check the received messages. Outbox: To review the messages that you sent. Voice Mail: To view Voice Mail Notification. Settings: To customize the messaging features. Address Entry: To shift to the phonebook mode for entering e-mail address.
Notes: 1. A mark spectively. 2. A mark
flashes, when new messages
are available in the Inbox or Voice Mail re flashes, when draft messages to
remain unsent in the Outbox. 3. Shortcut to Inbox: Press and hold open Inbox.

Receiving Text Messages

Your phone is able to receive and display a text message of up to 255 characters. The phone saves up to 30 messages in your Inbox. When your phone receives a new text message, the indicator flashes to alert you. The screen displays New Message with animation. Depending on the settings, the phone may also sound a short beep tone.

NewMessage 12/30

To Check Received Messages
1. Press and hold to open Inbox.
Inbox Jack Jill 1234567890 Ken
2. The Inbox lists the received messages with sender name or number. Example: 3. Scroll the list, and press
4. The screen displays the time stamp, sender, callback number if available, and message, each time. you press 5. To view Inbox Option, press the key under Option. 6. To return to the list, press the key under OK.
Notes: 1. The sender name is as you programmed it in your phonebook. 2. The icons mean as follows: : New text that you have not viewed yet. : Old text that you have already viewed. : Urgent, new text : Urgent, old text 3. To dial a callback number, press the key under Send when the number appears. 4. This feature receives only English letters.

Inbox Option

Reply: To shift to Send Message mode for replying to the message. Note this feature may not be available at all locations. Forward: To shift to Send Message mode for forwarding the received message. Erase: To erase the received message. Save Address: To save the sender address, callback number or the both in your phonebook.

SMS Text Lines Selection

You can select to have the text messages displayed in 4 or 6 lines for the Inbox and Outbox.

SMS Memory Management

This feature allows you to select Inbox memory management. Auto Delete: If the Inbox is full, it deletes the oldest text message to save a new text message. Warning Msg.: If the Inbox is full, it does not save any new text message, displaying Memory Full, New Text Rejected.
Note: The Outbox functions always in Auto Delete mode.
WEB BROWSING WEB BROWSING
Your CDM-9100 Audiovox Cellular Telephone allows you to enjoy accessing various Internet websites directly from your phone, including news, sports, travel, and weather, if you subscribe to Internet service with your service provider. Your phone also supports network services such as e-mailing with the web browser. Please contact your service provider for details of the available services.

Accessing Internet

Your phone is able to access the Internet while it operates in the digital mode, as indicated by the indicator.

To Start Web Browser

1. Press the key under Web on standby to enter Web Menu.
Web Menu 1:Alert Inbox 2:Internet 3:Settings
2. Scroll to Internet, and press tion may be displayed.
3. The Web Browser will start. The cached informa4. To access the Internet, press and hold service providers home page with a flashing Example: 5. Scroll the page by 6. Press or or.
Home Menu 1>Email 2 Contacts 3 Calendar Inbox
indicator is on. Your phone will display your
to select the menu option in
the bottom line of the display. 7. To return to the previous page, press or
8. To terminate the network access, press cached information. 9. Press again to close the web browser.
indicator will go out. You can still browse the

Browser Menu

key while the browser
is active to see the browsers local menu. This menu is always displayed in English.
Browser Menu 1>Reload 2 Home 3 Bookmarks Back OK
1. Reload: To reload the current page. 2. Home: To get back to the Home page. Press and hold

will do the same.

3. Bookmarks: To view your bookmark list. 4. Mark Site: To store the current page in your bookmark list. 5. About Phone.com: To view the browser version. 6. Advanced: Show URL: To display the URL (Uniform Resource Locator) of the current page. Homepage: To change your home page. Set UP. Link: To select a network server. Restart UP. Browser: To clear the cache memory in your browser. Encryption: To use for security.
Note: Altering of the settings on the Homepage and Set UP. Link may disable the web access.

E-mailing with Browser

The Web Browser allows you to send and receive emails directly through your phone. Please contact your service provider for details of the service.

2 ABC 6 MNO.

Version
Last Rescan SID Indicator (F27)
This menu item permits you to view the System Identification number (SID), which your phone is currently using. 1. Press 2. Press

2 ABC 7PQRS.

Last Rescan F27 SID NID 00020 00005

PRL ID Review (F28)

This menu item permits you to view the Preferred Roaming List (PRL) version that is programmed in your phone. 1. Press 2. Press

2 ABC 8 TUV.

PRL ID

Volume and Tone Controls

Ringer Volume Control (F31)
This feature allows you to adjust the ringer/melody volume. The following adjustment will also change the volume of the Clock Alarm alert and the Countdown Timer alert. 1. Press

3 DEF 1

Ring Volume

2. Keep pressing

until you get the de-
sired sound level, or Silent mode.
Note: In Silent alert mode, ringer tone is not given for an incoming call. However, if Automatic Answering feature is ON, ringer tone is given with the lowest available volume.
Ringer Type Selection (F32)
This feature permits you to select a ringer tone pattern from 15 options including melody ringers. 1. Press
Ringer Type F32 Ringer Ringer 01 02

2. Press 3. Press

to select the ringer tone.
Key Tone Volume Control (F33)

3 DEF 3 DEF.

Key Volume

until you achieve the

desired sound level, or Silent mode.
Note: Key tone will be off in Silent mode, but tone will be heard on the other side of the line.

Sending DTMF (F34)

This feature allows you to activate or deactivate Sending DTMF (Touch Tone) when you enter a number during a call. 1. Press lect. 3. Press

3 DEF 4 GHI.

DTMF Send On Off
2. Scroll to On or Off to seto set.

Key Tone Length (F35-1)

This feature selects the duration of the tone length when a key is pressed. 1. Press

5 JKL and Key Tone

Length Normal Short
2. You can change the current mode by 3. Press

Normal Mode

Tone is heard as long as the key is being pressed.

Short Mode

Tone is heard for a short time even if the key remains pressed.
Single Alert Beep Tone (F35-2)
This feature is used to signal an incoming call with only a single beep. This feature can only be used with the Silent alert mode. See Ringer Volume Control (F31) on page 73. 1. Press 2 ABC.

5 JKL and Beep Alert

On Off
2. You can turn this feature on/off by 3. Press

Caller ID Alert (F35-3)

This feature audibly alerts you when a Caller ID is received. 1. Press

5 JKL and Caller ID

Alert On Off
Service Mode Alert (F35-4)
With this feature on, an audible tone alerts you when the service mode changes from Digital to Analog, or vice versa. 1. Press

3 DEF 5 JKL and Service

Voice Privacy Alert (F35-5)
This feature audibly alerts you when the voice privacy service is provided, and also when the service is canceled. 1. Press

5 JKL and Voice

F355 Privacy Alert On Off
One Minute Beep Tone (F35-6)
With this feature on, you will be notified during a call, once every minute by a short beep tone. In addition, two beep tones will sound every five minutes. 1. Press

6 MNO.

5 JKL and Minute
Low Battery Alarm (F35-7)
When activated, this feature sounds an audible alarm when the battery level is low. If the alarm is given, recharge the battery or replace it with a fully charged battery. 1. Press

5 JKL and Low

F357 Battery Alarm On Off

Call Timers

To help you manage your calls, your phone is equipped with several Call Timers.

Last Call Timer (F41-1)

4 GHI 1
The talk time of the last call will be displayed. 2. Press
Call Timers F411 1M 23S 1:Last Call 2:Outgoing
Outgoing Call Timer (F41-2)
and 2 ABC. The cumulative
Call Timers F412 34M 56S 2:Outgoing 3:All Calls
talk time of all outgoing calls will be displayed. Web access call will not be added in this timer. 2. Press

All Calls Timer (F41-3)

. The cumulative
talk time of all incoming and outgoing calls will be displayed. Web access call 2. Press
Call Timers F413 1H 23M 45S 3:All Calls 4:Lifetime
will not be added in this timer. to exit.
Note: The above three timers can be reset to zero by using Call Timer Reset (F65-1) on page 85.

Lifetime Timer (F41-4)

lifetime talk time of all incoming and outgoing calls will be displayed. 2. Press
Call Timers F414 12H 34M 56S 4:Lifetime 5:Web Total
This timer cannot be reset to zero. to exit.

Web Total Timer (F41-5)

time of web access call will be displayed. 2. Press
Call Timers F415 53M 45S 5:Web total 1:Last Call
Note: This timer can be reset to zero by using Call Timer Reset (F65-1) on page 85.

Clock Indicator (F42)

Date and Time are automatically displayed, if this feature is enabled. 1. Press on/off by 3. Press

4 GHI 2 ABC.

Clock Indicator On Off

Clock Adjustment (F43)

You can use your clock in Auto or Manual mode. In Auto mode, your clock synchronizes to the base time of the CDMA system and displays the local time of the area where you are, while the can be adjusted manually. indicator is on. In Manual mode, your clock always works alone, and
Example: To set the time to 9:15 a.m. Apr. 21, 2001 in Manual mode. 1. Press press

4 GHI 3 DEF.

Adjust Auto Manual

2. Scroll to Manual and

3. Enter the year 0 month 0

JKL and 1

2 ABC for p.m.)

Adjust

, day 2

9 WXYZ 1

, time 0

'01 04/21 09:15am

for a.m. (or
4. Press the key under STO to set.
Notes: 1. In step 3 above, you can correct a digit by or

, moving the cursor by

2. The clock works internally during power off, and will display the time in the same mode when you turn the power on.

Clock Alarm (F44)

This feature alerts you repeatedly at the alarm time you programmed. Example: To set the alarm time to 7:30 a.m. 1. Press

4 GHI 4 GHI.

Alarm On Off
2. Scroll to On and press.
3. Enter the alarm time 0

7PQRS 3 DEF 0

07:30am

a.m. (or 2 ABC for p.m.)

4. Press the key under STO to set. The tor will be displayed. 5. At the alarm time, the alarm will ring for one minute with animation. 6. Press any key to stop ringing.

It's Time.

indica-
7. The clock alarm will repeat to ring every day until you cancel the feature.
Notes: 1. If the alarm is set to sound during a call, the clock alarm will ring after the call.
2. The clock alarm does not ring during power off, but this feature will be activated again when you turn the power on. 3. The clock alarm may not ring in Auto mode, if you skip the alarm time traveling into an area with the different local time. 4. See Ringer Volume Control (F31) on page 73 to change the alarm sound volume. 5 In place of the alarm sound, you can use Vibrating Alert (F8) on page 87.

NAM Selection (F52)

Some Cellular users may find it beneficial to register their phones with multiple numbers, for different cities where they may frequently travel. To provide this ability, your phone has two NAMs (Number Assignment Modules) enabling up to two registrations. If you have multiple registrations, the NAM Selection feature enables you to change the NAM being used by your phone. Do not use this feature, if you do not have multiple registrations.

To change NAMs:

1. Press NAM by 3. Press

5 JKL 2 ABC.

NAM Change
2. You can change the current or to set.

2 9876543210

Force Analog Call (F53)
This feature temporarily directs the phone to use the Analog Mode even if the Digital Mode has been previously selected. 1. Press 2. Press

5 JKL 3 DEF.

when scanning

the Analog Mode.

Force Analog Yes Quit
Notes: This feature automatically ends if: 1) The phone is turned off. 2) An outgoing call is made. 3) An incoming call is received. 4) After 10 minutes if items 1) ~ 3) did not occur.

NAM Name Display (F54-1)

You can program a greeting or a name of a maximum 12 characters on your LCD display. This will be displayed when the phone is turned on or when you change the NAM. (See NAM Selection (F52) on page 81.) As you can program a different name for each NAM, you can tell which NAM is currently active when you turn the phone on. 1. Press

4 GHI and NAM Name

F541 Tag 1 <No Name> 2 <No Name>
2. You can select other NAM by or

NAM Name

. to edit.

Then press

3. Enter your message. (See Entering Letters and Symbols on page 32.) 4. Press the key under STO to store the message.

Automatic NAM (F54-2)

If you have multiple NAM registrations (see previous description), your phone will recognize NAMs for which you are registered. The phone will then automatically switch to the proper NAM for the area in which you are in. 1. Press

4 GHI and Automatic

NAM On Off

Automatic Retry (F54-3)

With this feature on, your telephone will automatically make up to seven call attempts when the first try is not successful. The indicator will stay on, and the speaker will be to cancel the Automatic Retry.

muted. Press 1. Press

Retry On Off
Enhanced Voice Privacy Service (F54-4) (Digital Mode Only)
This feature requests the cellular system to provide the enhanced voice privacy service. This service can only be provided in the Digital Mode, and its availability depends on the cellular system and your service provider.
To Set the Enhanced Voice Privacy Mode:

4 GHI and Voice

Privacy Enhanced Standard
2. To request the cellular system to provide the enhanced voice privacy service, select Enhanced with or , and press

1. In a hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No statistically significant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of types of gliomas were considered together. It should be noted that the average length of mobile phone exposure in this study was less than three years. When 20 types of glioma were considered separately, however, an association was found between mobile phone use and one rare type of glioma, neuroepithelliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents increase risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is expected to bear on the accuracy and repeatability of these results.1 2. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the test cells to radiation for this long resulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur. The data already in the literature on the response of the micronucleus assay to RF are conflicting. Thus, follow-up research is necessary.2 FDA is currently working with government, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cellular Telecommunications Industry Association (CTIA) in particular is expected to lead to FDA providing research recommendations and scientific oversight of new CTIA-funded research based on such recommendations. Two other studies of interest have been reported recently in the literature: 1. Two groups of 18 people were exposed to simulated mobile phone signals under laboratory conditions while they performed cognitive function tests. There were no changes in the subjects ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only change noted among more than 20 variables compared.3

Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Symposium;1999 June 20; Long Beach, California. 2 Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and personal communication, unpublished results. 3 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915-MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.
2. In a study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically significant.4 In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones. What is known about cases of human cancer that have been reported in users of hand-held mobile phones? Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. population at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increasing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individuals cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to compare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched people without brain cancer. This is called a case-control study. The current case-control study of brain cancers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information. What is FDAs role concerning the safety of mobile phones? Under the law, FDA does not review the safety of radiationemitting consumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of mobile phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:

Force Analog Call. 81 Function Menu Access.. 67 Tree.. 68 Function Reset.. 86
Hyphenation Auto. 36, 72 Manual.. 36
Keypad Lock. 69 Language.. 30, 72 Link Dialing.. 50 Mute.. 29
NAM Automatic.. 82 Selection. 81 Name Display. 82 Own Telephone Number.. 71
Vibrating Alert. 87 Voice Mail Alert. 62 All Clear.. 86 Dialing V. 60 Notification. 59 Voice Privacy.. 83 Alert. 75 Volume Earpiece.. 28 Key Tone. 74 Ringer.. 73 Web Browsing. 63
The CDM-9100 is using one or more of the following US patents licensed by QUALCOMM Incorporated:
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338
T9 Text Input is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
12 MONTH LIMITED WARRANTY WARRANTY
AUDIOVOX COMMUNICATIONS CORP. (the Company), warrants to the original retail purchaser of this Audiovox Handheld Portable Cellular Telephone, that should this product or any part thereof (except the items listed below), under normal use and conditions, be proven defective in material or workmanship within the first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new or rebuilt parts) at the Companys option, without charge for parts or labor directly related to the defect(s). The keypad and display are similarly warranted for ninety (90) days from date of purchase. The accessories consisting of the rechargeable battery pack and desktop charger are similarly warranted for twelve (12) months from original purchase. This Warranty does not apply to: (a) Any damage that has resulted from the connection to, or use of, any accessories not expressly approved by Audiovox; (b) Battery Packs, fuses, or any costs incurred for testing or checking; (c) Theft, battery leakage or use of an improper electrical source; (d) Any product or component that has been subjected to serial number defacement, misuse, physical abuse, unauthorized alteration or repair, improper installation, mishandling, neglect or improper storage; (e) Any damage that has resulted from exposure to excessive temperature or humidity, exposure to excessive moisture or dampness, or exposure to extreme environmental or weather conditions; or, (f) Any accidental damage, whether caused by impact with another object, fire, flood or other event. This Warranty is not assignable or transferable. To obtain repairs or replacement within the terms of this Warranty, the product should be delivered with proof of warranty coverage, specification of defect(s), transportation prepaid, to the Company at the address shown below. For TRAVELERS WARRANTY SERVICE. Call toll free to (800) 229-1235 (in N.Y. State, (631) 233-3410) for reference to an Authorized Warranty Station in your area.