Mobilecom Wireless

5211 Barker Cypress suite 113 Houston Tx. 77084 Phone:(281)861-0555 Fax: (281)861-7770 E-mail: info@mymobilecom.com www.mymobilecom.com
PLEASE CONTACT US IF YOUR MODEL IS NOT LISTED!! THANK YOU FOR CHOOSING MOBILECOM!!!

SAMSUNG

Samsung sph-n240, n400, a460, a500, etc

Nam Set: ##Spc

Samsung sch-411, 611, n105, a100, a300, a2000, etc
Nam Set: 47*869#08#9 Nam Set: Menu+60
Samsung a300, a530, a610, a620, a660, a670, etc

Nam Set: Menu, 6, *

Samsung X, E, V, S-series (korean), e250, v420, s250, etc
Nam Set: 6548#0**4#6 Nam Set: 47*869#08#9 Nam Set: 74153697193

Samsung i700, etc

Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587

Samsung i300, etc

1. Tap on the Phone Icon with stylus 2. Press #907*9#0 ENTER LOCK should appear on screen 3. Enter OTKSL 4. SVC MENU will appear press 1 5. Enter 10 digit MIN and then press SAVE 6. Press SAVE again 7. Press 3 and then press SAVE 6 times 8. Enter the HOME SID and press SAVE once 9. Press END key twice

KYOCERA

Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc
Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc Tips: On some kyocera handsets the factory service module has not been disabled and the phone can be programmed without the spc by inputting. Nam Set: ##333333 menu (service)
Sanyo 4900, 5150, 5300, 8100, etc
Nam Set: ##Spc+Ok+Key Down+Ok
Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc

Nam Set: *3001#12345#

Nokia 8887

Nokia 8587

Nam Set: *#626#7764726#
51xx, 61xx, 71xx, 3285, 63xx, etc:
1) Turn on the phone. Press *3001#12345# 2) Scroll up to where it says "Field Test" and choose SELECT 3) Highlight "Enable" and choose OK. Turn the phone off then back on. 4) If the test mode screen does not show up press MENU and scroll down to "Field Test" choose SELECT. Press then
choose OK. 5) Lower left or upper left number is the signal strength. 6) To turn off the test mode press MENU and scroll down to where it says

NOKIA 3360, 6360:

1) Turn on the phone. Press *3001#12345# 2) Scroll up to where it says "Field Test" and choose SELECT 3) Highlight "Enable" and choose OK. Turn the phone off then back on. 4) If the test mode screen does not show up press MENU and scroll down to "Field Test" choose SELECT. Press then choose OK. 5) Lower left or upper left number is the signal strength. 6) To turn off the test mode press MENU and scroll down to where it says

AUDIOVOX

Audiovox 4000, 9000, 9100, 9155, 9500, etc
(Power the phone on and wait until the little light on top goes out) Nam Set: 289+fcn+#+1

Audiovox pcx-3500xl

Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc
Nam Set: ##20022002+Pwr+1+Spc

Audiovox 8610, 8910, etc

Name Set: ##847446, end, 111111
Audiovox-107 Nam Programming:

Nam Set: 45680*47*869#1

Audiovox CMP-3

Audiovox 9950

Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp)
Nam Set: m + # + envelope key + * + 1

MOTOROLA

Motorola 7760, 7860, 2260, 8160, etc
Nam Set: 74663# Cl CL or Back back

Motorola v60c, v120c etc

Nam Set: 74663#, Menu, Menu, Spc Nam Set: Menu, 073887, * (type quickly)

Morola Q

Nam Set: Menu, 073887*, Spc

Motorola t182, c210, etc

Nam Set: ##1111 end Nam Set: ##298645665 end Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc
Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Motorola StarTac 2004

Nam Set: 5759789*#, rec key (3)times (spc - 915037)
Motorola ms200, ms230, etc
Nam Set: 5759789*# (spc - 915037)

Motorola v6060

Nam Set:147*369#456*0#

v60, c120, c331, etc:

1) Turn on the phone. Press MENU * 2) The phone will require you to "Enter a Security Code", press 000000, OK 3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable" choose SELECT. Your phone is now in test mode. 4) Signal strength is the 3_rd number down on the left hand side of the screen. 5) To toggle between regular mode and test mode: Press MODE then quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU. 6) To turn off the test mode the phone must be in regular mode, then follow the above sequence and scroll down to where it says "DISABLE" instead of "ENABLE" and choose select.

lgc-300:

Nam Set: Menu, 9, Spc A-key: Press "Sto" 3sec, 2539**

lgc-330w, etc

Nam Set: Menu, 4, 0, Spc

lgc-510, v111, etc

Nam Set: Menu, 3, 0, Spc

lgc-500, 800w, etc:

Nam Set: Menu, 9 , 0, Spc
Lg LX,VX-series, VX4400, VX6000
Nam Set: ##Spc Nam Set: Menu, 0
<<PANASONIC>>
------------------------------------------------------------------------------PANASONIC TEST MODE:
Panasonic (Most): 1) Turn on the phone. Press #7764726# choose SEND 2) Scroll down to where it says "NAM 1" and choose OK. Scroll down to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor" and choose EDIT. 3) Press 1 and choose OK then choose BACK. The phone will say "Back To Level 1" choose YES. Now choose EXIT the phone will ask you "Exit And Save Change" choose YES. 4) Signal strength is the top right number on the screen. 5) To turn off the test mode follow the above sequence except press 0 instead of 1 at the "Built-In-Monitor"