Australian Monitor

AMIS60 and AMIS120

60W and 120W Mixer Ampliers
The Australian Monitor AMIS60 and AMIS120 have been the most successful and reliable ampliers in the Australian Monitor Range for over six years. We have now made our most popular ampliers even more contractor friendly with the addition of two extra balanced XLR mic/dual RCA line inputs. The AMIS60 and AMIS120 still boast the same reliability and an excellent feature set, including vox muting on channels one and two (defeatable), Bell, Pre-Announce, Evac and Alert tones on board, Vox triggered output relay, VCA master level control, 15V DC phantom power and mains or 24DVC operation. Now with more inputs available they offer even greater exibility for commercial audio installations.

Features

6 balanced mic/dual RCA line inputs 60 and 120 watt versions 2 RU Vox muting on channels 1 and 2 (defeatable) Bell, Pre-Announce, Evac and Alert tones on board Vox triggered output relay VCA master level control 15V DC phantom power Mains or 24DVC operation 100 volt, 70 volt, 4 or 8 ohm operation

Specications

The Australian Monitor Mixer amplier shall be two standard rack units in height and have six universal input channels each comprising a balanced XLR microphone level input and a dual RCA live level input. The amplier shall offer remote master VCA control 24V DC and mains power operation, a Vox triggered relay output, and a Master EQ with 12dB of cut and boost at 100 Hz and 9dB of cut and boost at 10kHz. The amplier shall output 60 watts/120watts at 100 volt, 70 volt or 4 ohm and 8 ohm. The Amplier shall be an Australian Monitor AMIS60 and AMIS120

AMIS60

Power output (0.5%THD, 1khz) Signal To Noise Ratio Power bandwidth (-3dB +1dB) Output regulation Dimensions (W x H x D) Weight Net Shipping 8.5kg (18.7lb) 10.5kg (23.1lb) 60W > 76dB 60Hz-15kHz 90% 482 x 88 x 313.5mm 19 x 3.5 x 12.3

AMIS120

120W > 76dB 60Hz-15kHz 90% 482 x 88 x 313.5mm 19 x 3.5 x 12.3 11.0kg (24.2lb) 13.0kg (28.6lb)

COMMON TO ALL MODELS

Total Harmonic Distortion Tone Controls Bass at 100Hz Treble at 10KHz < 0.5% @ 1kHz,-1dB +/- 12dB +/- 9dB Mic Sens 1mV Aux Sens 50mV Line out Sens 2V, @ 1k0hm Tape Sen 300mV @ 10kohm Mic 1k3 ohm Aux >200kohm Line Imp 100ohm Tape Imp 100ohm Mic 136mV (42dB) Aux > 15V (>40dB)

Sensitivity

Input Impedance

Output Impedance

Headroom
ENGINEERED BY AUSTRALIAN MONITOR
Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ABN Website: www.australianmonitor.com.au International enquiries email: international@australianmonitor.com.au
DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY HILLS SVL www.hillssvl.com.au
NSW P: 1411 QLD P: 1312 ACT P: 4544 WA P: 0200 VIC P: 7477 SA P: 8300 NZ P: 9426 E: nsw@hillssvl.com.au E: qld@hillssvl.com.au E: act@hillssvl.com.au E: wa@hillssvl.com.au E: vic@hillssvl.com.au E: sa@hillssvl.com.au E: sales@hillssvl.co.nz