Relllease Datte:: 20061225 Re e ase Date : 20061225 Re ease Da e 20061225
AverTV DVI Box Series (M099)
Turn Your LCD Monitor into a LCD TV
AVerTV DVI Box series are the new generation TV Box. That aiming toward professional grade video processor for TV/Video viewing with high- definition 1920x1200 WUXGA TV Box. The great new feature is Picture Pause with this function you wont miss any information such as Lottery numbers and recipe. It provides the complete solution for turning any LCD monitor into a TV and multimedia entertainment center, with or without a PC connection Watch TV with 13-Channel Preview AVerTV DVI Box9 only , Color/Edge Enhancement, Cutting- edge progressive scan technology and 3D-Motion Adaptive De-interlace give you sharper images and 3:2/2:2 Pull-Down technology allows for better picture quality. Plug & Play external AVerTV DVI Box series allow you to watch TV on any LCD and plasma with DVI and VGA* input.

At A Glance

Watch TV in your DVI & GVA* monitor Support resolution up to 1920x1200 PIP only support resolution up to 1680x1050 60Hz Worldwide analog support NTSC/ PAL/SECAM Except SECAM-L
Transparent Picture-in-Picture 16:9/16:10 wide screen Picture Pause Support switch able input sources TV , S-Video, Composite-Video, PC, Component for AVerTV DVI Box9 only Color/Edge enhancement Auto power off
Comparison Table for AVerTV DVI Box Series
Product Name Resolution Aspect Ratio Adjustment Transparent PIP Channel Preview Picture Pause Interface Type
AVerTV DVI Box7 1920x1200 4:3 16:9/16:10 O O* O DVI & VGA
AVerTV DVI Box9 1920x1200 4:3 16:9/16:10 O 13 O DVI & VGA

Specifications

Input Signal DVI-I DVI Single-link only S-Video A/V RCA Component(YPbPr, 480i/576i, AVerTV Box9 only) PC Audio RF Output Signal DVI-I DVI Single-link only Audio Earphone & Speaker

Product Image

*AVerTV DVI Box7 can only continuously display the next consecutive TV channels.
AVerTV DVII Box Seriies (M099) AVerTV DV Box Ser es (M099)

Transparent PIP

The function provides you to work on your PC and watch TV at the same time, providing more convenience to watch TV without interrupting your work You can choose the windows size in 1/4, 1/9 and 1/16 of TV screen when you work on PC (AVerTV DVI Box9 only)

Progressive Scan

With world-leading Progressive Scan technology, you will see no flicker and it will deliver a sharper, clearer picture.

Package Included

AVerTV DVI Box7 or AVerTV DVI Box9 Vertical Stand Remote Control (Batteries Included) Power Adapter DVI-D Cable Audio Cable User Manual
Video with Progressive scan
Video without Progressive Scan
3D-motion Adaptive De-interlace
Advanced 3D-motion Adaptive De-interlace can eliminate jagged edges of TV & DVD movie to improve the clarity and sharpness of the overall image.

System Requirements

Video with 3D-motion Adaptive De-interlace LCD/Plasma monitors with DVI & VGA* input Video without 3D-motion Adaptive De-interlace * When you use the monitor with VGA

input, please prepare the DVI to VGA connector.

2 Pull-Down

only for
AVerMedia AVerTV DVI Box series functions only with the TV system of the country it is manufactured for and originally distributed in.
World leading progressive Scan Technology and 3:2/2:2 Pull-down
NTSC correction can eliminate jitters form TV/DVD movies to improve the clarity and sharpness of the overall image.
AVerMedias Quality Insistence
AVerMedias products are not only commit to RoHS/WEEE Directive, but conduct EMI and safety countermeasure to ensure consumers health and environment protection. All products are available with lead-free finishes and flame retardant.
2007 by AVERMEDIA TECHNOLOGIES, Inc. All right reserved. AVerMedia is registered trademarks of AVerMedia Technologies, Inc. All other trademarks belong to their respective companies.

Whats in the Package / /

The AVerMedia AVerTV Box9 Unit /- II /
Touch Button Control Panel / /
The Touch Button Panel found - II on the top side of the AVerTV Box9 provides quick access to commonly used functions.

999

POWER / /
AVerMedia AVerTV Box9 / - II / 999
! Turn the unit on /off ! / ! /

SOURCE / /

! Press this button to toggle between TV/Video and PC display ! / ! /

VOLUME

Vertical Stand

Users Manual

Remote Control (with batteries) () ()
! Press Volume to increase and Volume to decrease the volume level ! ; ;

CHANNEL

! Press Channel to go up and Channel go down to the next active TV channel ! ; ! ;

VGA Cable VGA VGA

Infrared Sensor / /
S-Video/Component 2-in-1 Cable S / S /
When using the remote control, aim it at the Infrared Sensor which is located at the front panel of the AVerTV Box9.

- II 999

Power Adapter

Audio Cable

S - IN

INFRARED REMOTE SENSOR

A / V IN

E A RPH ONE

Connection Ports / /
The port connectors allow connection of your TV antenna, PC, VGA monitor or LCD projector, speakers, video, or s-video source etc.
/ LCD/CRT(PC) LCD S-Video
! VGA OUTPUT to MONITOR ! VGA OUT ! VGA OUT
! AUDIO INPUT from PCs SOUND CARD ! TV Antenna (75 ) ! Audio IN ! (75) ! Audio IN ! (75)

! POWER ADAPTER ! !

! VGA INPUT from PC ! VGA IN ! VGA IN

! Speaker Connection ! !

AVerMedia AVerTV Box9 Back Panel / - II / 999
! COMPOSITE VIDEO INPUT ! A/V ! A/V ! Left & Right AUDIO INPUT ! !

E A R PH ONE

AVerMedia AVerTV Box9 Front Panel / - II / 999
The Installation and Setup section provides more information on cable connections.
The figure below shows the proper cable connections for installing AVerTV Box9 and connecting it to your audio/video equipment.
! S-VIDEO/COMPONENT VIDEO INPUT ! S/ ! S

! EARPHONE JACK ! !

Installation and Setup / /
Using the AVerMedia AVerTV Box9 / /
Different countries have different TV systems, for example, PALBG, PAL-DK, NTSC-J, NTSCMetc. AVerTV Box9 functions only with the TV system of the country it is manufactured for and originally distributed in. - II - II ( Each column in the table below corresponds to a different type ) of TV system. Only one of these TV systems (only one column) will appear as your SET AREA. (6 ) Make sure that you select the correct country signal from the - II menu. To change the area setting, refer to SET AREA (page 6).
NTSC-J JAPAN PAL-N PAL-M NTSC-M ARGENTINA BRAZIL KOREA TAIWAN USA-STD USA-HRC USA-IRC SECAM-DK BULGARIA RUSSIA UKRAINE SECAM-L FRANCE PAL-I UK HK

999 999 ( ) (6 ) 999

PAL-BG AUSTRALIA AUSTRIA BANGLADESH BELGIUM DENMARK EGYPT GERMANY GREECE INDIA INDONESIA IRAN ITALY NETHERLANDS NETHERLANDS_1 NETHERLANDS_2 RUMANIA PORTUGAL SINGAPORE SLOVENIA SPAIN SWEDEN SWITZERLAND TURKEY UAE
PAL-DK CHINA CZECH HUNGARY POLAND-1 POLAND-2 POLAND-3 SLOVAKIA
To ensure that you can select and watch all ac-tive channels, refer to section CH SCAN (page 6) on how to automatically scan and memo-rize all active TV chan-nels in your area.

( 6 )

Accessing TV Controls / /
To access various TV controls, "MENU" open up the menu displays or press on the remote control buttons. "MENU"

- Switch the audio source from the AVerTV Box9 when in PC PC BGM/ Res. display mode - Switch display resolution setting to 1024x768 when in TV/Video mode

- - 1024x768 /

- - 1024x768 /

The Remote Control/ /

The diagram below shows the remote control unit layout. 1
AV/PC To toggle between TV/ Video or PC display Switch between TV or external video sources To select a TV channel

Turn the unit on/off

/
If the channel offers multi language feature, press this button MTS/ STEREO to toggle between languages. (option) To automatically turn off the unit 30,60, 90, 120 or 150 30,60, 90, 120 or after 0:30,1:00, 1:30, 2:00 or 2:30. SLEEP Display information 15

SOURCE

DISPLAY

TELETEXT (option)

NUMBER BUTTONS
Press to view teletext, overlay text over video and disable teletext Note: Teletext buttons only present in European model.

17 18

Jumps to the 4 teletext page which FASTEXT LINK the color buttons corresponds to (Option) To use the normal function of the CH 5 , CH , Vol , PIP CH and Vol buttons in PIP mode
Allows you to instantly switch to three (3) brightness level. : : Note: This feature is not supported when viewing in YPBPR mode. Switch between PIP*, PIP Seethru** and Full Screen mode * To watch TV/Video in a small screen on an always on top of the PC display. ** Make the small video screen semi-transparent allowing the image behind the small screen show through.

PIP PIP PIP

PIP Pos.
To move the small PIP TV/Video screen PIP using the CH , CH , Vol , and Vol buttons in PIP mode
PIP PIP * PIP (VGA IN) ** PIP

/ * PIP (VGA IN) ** PIP

CHANNEL RETURN
Go to the previously selected channel To turn off /on the sound To call up the menu display *Go to the next or pre-vious TV channel line up *Use these buttons to make the selection in the menu or picture setting * In adjusting the OSD position, use these buttons to move the menu display up and down of the screen

PICTURE

To adjust brightness, contrast, color, tint or sharpness
PREVIEW Display 13 consecutive TV channels on-screen * To increase and decrease volume level * Use these button to adjust the menu or picture setting * In adjusting the OSD position, use these buttons to move the menu display to the left and right of the screen
13 13 * * * PIP * * * PIP

21 * * * * * PIP * PIP

Teletext Control Buttons (Optional)/ /
The figure and descriptions in this section show how to use the teletext function using the remote control. To select a teletext page
Supported Display Setting in PIP Mode/ (PIP) /(PIP)()
The reference table below lists the monitor display resolution and refresh rate settings that AVerTV Box 9 supports when viewing in PIP mode:

1. If the monitor does not support or is not set to the following mode listed below, it will switch back to TV/Video mode. 2. If the computer switches to sleep mode, it will change back to TV/Video mode.
1 NUMBER BUTTONS 2 FASTEXT LINK /

4 CH /

Use the CH and CH buttons to go to the next upper or lower teletext page. Press to view teletext, overlay text over video and disable teletext Jump to the teletext page which the blue color corresponds to.
Jump to the teletext page which the red color corresponds to. Jump to the teletext page which the green color corresponds to. Jump to the teletext page which the yellow color corresponds to.
5 TELETEXT 6 FASTEXT LINK

3 FASTEXT LINK /

- II (V sync. Freq.) 1. / PIP ( PIP ) TV/VIDEO 2. PIP VGA 1
700 1. / PIP ( PIP ) TV/VIDEO 2. PIP VGA 1.

7 FASTEXT LINK

Resolution/ /
Refresh Rate (Hz)/ (Hz) / (Hz)
Customizing the Picture Setting/ /
If you want to adjust the picture quality, press the PICTURE button on the remote. Then, you can use the CH or CH buttons to select the items in the PICTURE menu; and the Vol or Vol buttons to make the adjustment. To restore the picture default setting, select RESET and then press Vol. PICTURE CH CH PICTURE CH CH

1024 x x x x 900

60, 70, 75, 60 60
Calling Up a Menu Display / /
Press the MENU button on the remote control to call up and exit the main menu or submenu display. Then, you can use the CH or CH buttons to select the items in the menu list; and the Vol or Vol buttons to adjust or to make a selection. The table on the next page lists the different functions you will find in the menu.

MENU CH CH Vol Vol

MENU CH CH Vol or Vol

Main Menu

TV SOURCE

On Screen Display

Use the CH or CH buttons to select between antenna TV or cable TV source, then press Vol button to make the selection.

CH CH Vol CH CH Vol

CH FINE TUNE
If the TV reception is not clear, choose CH FINE TUNE then press Vol and Vol buttons until the TV picture becomes clear.

Vol Vol

CH SCAN
Use CH or CH buttons to select between CH SCAN or All FREQ SCAN. Press Vol button to make the selection. If you want to interrupt or cancel the scanning process, press MENU button, but this will only memorize the scanned channel. These two types of channel-preset functions enable you to memorize all active channels in your area. Use the CH SCAN function first. If there are channels missing after you perform CH SCAN, use ALL FREQ SCAN function and repeat the searching process. NOTE: ALL FREQ SCAN is a very time consuming process. If the default frequency table already includes all active TV channels in your area, then avoid using the ALL FREQ SCAN.

- II () : Vol

999 ( ) : Vol
Press Vol button to call up MORE. menu list.

DEFAULT

Use the CH or CH buttons to select YES to clear all the preset channels and to restore the original factory default picture setting or NO to exit. Then press Vol.

CH CH

FAVORITE CH
This function enables you to add, remove, reprogram or reassign the TV channels with channel numbers that are easier to remember. In the selected USER CH, enter the new channel number you want to assign or the channel number you want to remove/add to the channel line up. Then, in the CATV CH or TV CH, enter the channel number you want to remap or the channel number

- II

999
you want to remove/add. Use the CH or CH buttons to select ADD to include or DEL to remove the channel number in the channel line up and then press Vol. Note: To browse through channels while setting the USER CH and CATV number, press the CH or CH buttons.

CH CH

SET AREA
Press the MENU button, select MORE, select SET AREA in the MORE, list items, use the CH or CH buttons to choose the appropriate country signal, then press Vol button to make the selection. If your country is not listed, choose another country with the same TV system as yours.

- II MENU

CH, CH, Vol, Vol MENU

999 MENU

OSD POSITION
Use the CH, CH, Vol, and Vol buttons to move the frame where you want to set the position of the MENU, then press MENU.

RESOLUTION

Use the CH or CH buttons to choose from five display resolution settings then press Vol.

CH CH Vol

Use the CH or CH buttons to select NO to restore the original resolution setting or YES to accept the new resolution setting then press Vol. If the monitor can not support the new setting, the original setting will be automatically restored after 10 seconds or press PC BGM/Res. button of the remote control to switch to resolution setting of 1024x768.

CH CH Vol YES NO NO YES 10 PC BGM/Res. 1024x768 CH CH , Vol
CH CH Vol YES NO NO YES 10 PC BGM/Res 1024*768 CH CH , Vol

LANGUAGE

Use the CH or CH buttons to select from different languages then press Vol.
FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. CAUTION ON MODIFICATIONS To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed in computer equipment certified to comply with the Class B limits. All cables used to connect the computer and peripherals must be shielded and grounded. Operation with noncertified computers or non-shielded cables may result in interference to radio or television reception. Changes and modifications not expressly approved by the manufacturer could void the users authority to operate this equipment.

AVerMedia AVerTV Box9 - II 999

Users Manual

European Community Compliance Statement (Class B) This product is conformity with the protection requirements of EU Council Directives 89/336/EEC amended by 92/31/EEC on the laws of the Member States relating to electromagnetic compatibility. TRADEMARKS AVerMedia and AVerMedia DVD EZMaker are registered trademarks of AVerMedia TECHNOLOGIES, Inc. All other trademarks belong to their respective companies. COPYRIGHT 2006 by AVerMedia TECHNOLOGIES, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of AVerMedia TECHNOLOGIES, Inc. The mark of Crossed-out wheeled bin indicates that this product must not be disposed of with your other household waste. Instead, you need to dispose of the waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where to drop off your waste equipment for recycling, please contact your household waste disposal service or the shop where you purchased the product.

English

P/N300AACAG Made in Taiwan