Regularly

Gloss Black #301-950 (Straight) #301-951 (Curved)
Your Choice! (Straight). $499.99LIST $37900 Your Choice! (Curved). $519.99LIST $39900

27900 $ 29900

EACH EACH
Dayton Audio IO650 Series 6-1/2" Indoor/Outdoor Speaker Pair
Includes mounting hardware and gold plated 5-way binding posts 6-1/2" polypropylene woofer with rubber surround 5/8" polycarbonate tweeter with ferrouid 5/8" piezoelectric super tweeter All-purpose 3-way speaker system 125W max power handling Weather-resistant ABS cabinets with aluminum grills
#300-652.. $49.99LIST $3250
Allison Powered Subwoofers
Adjustable crossover 40 to 140 Hz High output, bass-reex design Flared port for reduced chufng Solid 3/4" MDF cabinet construction Front-ring subwoofer. Only the best possible components were considered for use in the construction of this subwoofer, and each subwoofer has been designed to create amazing low frequency performance at a price thats more affordable than many high-end subwoofers.
Part # 309-177 309-176 Mfg. # AL10 AL8 Description 10" 125W subwoofer 8" 75W subwoofer List Price $399.99 $299.99 Regular Price $348.80 $248.80 Buyout Each $199.00 $150.00
#310-056 (Black) Regularly #310-058 (White). $164.99LIST $12630
AudioSource PSW110 10" Powered Subwoofer
125W high-power low-distortion amplier Front panel 40-200 Hz crossover controls and gain adjustment

#302-628.. $15998

1-800-338-0531
Home Audio/Video Wow, Caitlin, your new home audio system sounds great, but where are the speakers?
Great sound from where you least expect it
Your guests will never be able to tell where the music is coming from. The new Dayton Audio Shadow Sound system provides beautiful, rich sound while remaining nearly undetectable. Each system includes two specially engineered, strategically placed satellite speakers, and a high performance subwoofer, all specically designed for near oor placement. The low-mounted Shadow Speakers blend in with a rooms electrical outlets in a manner so aesthetically pleasing they almost seem invisible. One Shadow Sound system is all that is required for a small to medium sized room (up to 300 sq. ft.). For larger rooms, or in a room where high-output TV sound is desired, add additional satellites to achieve evenly dispersed coverage. Nearly undetectable whole house audio. Can you nd the one in the photo above? Extremely high-quality sound (35 Hz -18,000 Hz) Satellite speakers use exclusive Tang Band neodymium drivers Creates a seamless, lush sound environment Aesthetically appealingyour wife will love it! Stealthy yet powerful 8" dual coil in-wall subwoofer Easy to install in new or existing homes

#300-380.. $59.99LIST $4480
#181-766.. $64.99LIST $4967

#181-140

Dayton Audio Illuminated USB 2.0 Hubs
USB 1.1 and 2.0 compliant Great for Compatible with the video games! PS3 and Xbox 360 Supports high-speed 480 Mbps devices Plug-n-play connectivity
Unique docking stations charge and store Wii remotes when not in use Kits include charging dock, battery packs, and battery covers Saves time and money over replacing batteries every week Smart charge LED for charge status and separate power supply included with quad charging dock Note: Wii remotes are not included. Wii remote covers must be removed for proper operation.

#181-137 #181-141

#181-140.. $99.99LIST $4464
#181-137.. $49.99LIST $2496 #181-141.. $49.99LIST $29

Regularly 68

Wireless IR Sensor Bar for Wii

3450 $ 1850 $ 2250

EACH EACH EACH
#130-011 (4-port). $22.99LIST $1713 #130-013 (7-port). $33.99LIST $2598

1200 $ 1400

Dayton Audio USB 2.0 Extension Cables
Compliant with USB 2.0 specication Allow transfer speeds up to 480 Mbps Shielding provides maximum resistance to EM and RF interference Contacts are 24 karat gold plated
The integrated Bluetooth transmitter allows you to relocate the Wii to a location that the original wired IR sensor bar wouldnt allow. Operates on two AA batteries, not included. Dimensions: 7/8" H x 9-1/2" W x 1-3/8" D. Regularly

Great for video games!

#181-151.$29.99LIST $1478
Part # 130-030 130-032 130-035 130-037
Mfg. # USB23010 USB23020 USB23030 USB23050
Length 1 meter (3.3 ft.) 2 meters (6.6 ft.) 3 meters (9.8 ft.) 5 meters (16.4 ft.)
List Price $3.99 5.99 6.99 9.99
Regular Price $2.71 4.01 5.13 7.45
Special Price $2.50 3.50 4.50 5.50
22-in-1 Olympic Sports Kit for Wii
Note: Wii remote Kit includes: SPECIAL not included. 1 Golf club 1 Baseball bat 1 Ping Pong paddle 1 Tennis racket 6 Analog control buttons 1 Wii remote sports grip 1 Wii nunchuk sports grip 2 Wii console dust covers 2 Rubberized Wii remote battery covers (one blue, one black) 1 Remote analog control converter (for ghting games) 1 Billiards cue/shing pole/sword (three pieces) 2 Wii remote wrist straps 1 Wii remote pistol grip Regularly
Dayton Audio USB to Serial Port RS-232 Adapter
Driver disc included USB 1.1 and 2.0 compliant Compatible with Mac OS 8.6 or greater

USB cable included

Dayton Audio Category Cable
Riser rated CMR jacket Solid conductor construction Spool-in-Box payout system 350 MHz Cat 5e and 500 MHz Cat 6 speed ratings
Mfg. # 105E6Y 105E6U 105E8Y 105E8U 105E9Y 105E9U 205E6Y Type Cat 5e Cat 5e Cat 5e Cat 5e Cat 5e Cat 5e Shielded Cat 5e Shielded Cat 5e Cat 6 Cat 6 Color Blue Blue Gray Gray White White Blue Blue Blue Blue List Regular Special Length Price Price Each 500 ft. $123.99 $50.00 $42.50 1,000 ft. 241.99 89.26 74.ft. 123.99 50.00 42.50 1,000 ft. 241.99 89.26 74.ft. 123.99 50.00 42.50 1,000 ft. 241.99 89.26 74.ft. 1,000 ft. 500 ft. 1,000 ft. 174.99 345.99 181.99 358.99 68.56 128.00 72.20 140.54 59.50 109.00 59.50 109.00
Dayton Audio RG-59/U Solid Copper + 18/2 Siamese 100 ft.
22 AWG solid copper center conductor NEW 95% coverage bare copper braid 125% coverage Mylar foil 18 AWG 2-conductor power cable attached *Features Spool-in-Box UL, cUL listed and CMR rated payout system Spool-in-Box payout system
Length 100 ft. 250 ft. 500 ft. List Regular Special Price Price Each $42.99 $32.40 $22.50 93.99 71.74 52.50 173.99 133.40 99.50
Part # 101-005 101-007 101-013 101-015 101-021 101-023 101-029
101-031 205E6U 101-037 1066Y 101-039 1066U
Cable Center Shield Part # Type Cond. Type 101-110 RG-59/U+18/2 Copper 95% copper 101-112 RG-59/U+18/2 Copper 95% copper 101-114 RG-59/U+18/2 Copper 95% copper
Dayton Audio Coaxial Cable
UL, C-UL listed and CMR rated Spool-in-Box payout system on 500 and 1000 ft. payout boxes Low capacitance designs for great digital cable and satellite performance 75 ohm impedance is suitable for custom length composite, component, or audio patch cables 125% overlapped aluminized Mylar foil used in each cable design for noise rejection
Part # 101-125 101-127 * 101-129 * 101-131 * 101-135 * 101-137 101-139 101-141 101-143 * 101-145 * 101-147 101-149 * 101-151 * 101-153 101-101 101-103 * 101-105 * 101-107 Cable Type RG-6/U RG-6/U RG-6/U RG-6/U Dual RG-6/U Dual RG-6/U Dual RG-6/U Quad shield RG-6/U Quad shield RG-6/U Quad shield RG-6/U Quad shield RG-6/U Dual quad shield RG-6/U Dual quad shield RG-6/U Dual quad shield RG-6/U RG-6/U RG-6/U RG-6/U RG-6/U Center Conductor Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Copper-clad steel Solid copper Solid copper Solid copper Solid copper

Parts List Parts List

Part #
295-368 275-130 285-020 091-602 091-624 240-730 260-330 260-540 255-610 255-624 255-294 255-268 266-900 266-914 027-888 027-890 027-576 027-592 027-608 027-616 027-626 027-630 027-950 005-2.5 005-4.0 005-5.0 005-10 005-20 017-8

Description

Dayton RS270S-Reference Shielded Woofer 8 Ohm Dayton RS28A-4 1-1/8 Aluminium Dome Tweeter Dayton RS52AN-Dome Midrange Dayton SBPP-BK Binding Post Plate Black Anodized Dayton BPP-SN Premium Binding Post Pair Satin Nickel Speaker Cabinet 1/2 Super Toe Spike Set 4 Pcs. Acousta-Stuf Polyll 5 lb. Bag Speaker Gasketing Tape 1/8 x 3/8 x 50 ft. Roll 16AWG Jantzen Copper-foil inductor 0,22mH 16AWG Jantzen Copper-foil inductor 0,68mH 18AWG Jantzen air-core inductor 10,00mH 18AWG Jantzen air-core inductor 2,20mH Erse Super-Q core inductor 1,50mH Erse Super-Q core inductor 3,30mH Kimber Cap 10uF Kimber Cap 12uF Solen MKP 15uF Solen MKP 33uF Solen MKP 68uF Solen MKP 100uF Solen MKP 160uF Solen MKP 200uF Jantzen Cross Cap 56uF Mills non-inductive resistor 2,5 ohms Mills non-inductive resistor 4,0 ohms Mills non-inductive resistor 5,0 ohms Mills non-inductive resistor 10 ohms Mills non-inductive resistor 20 ohms Wire wound resistor 20 watts / 8 ohms

Dayton Woofer

#295-368

Dayton Midrange

#285-020

Dayton Tweeter

#275-130

Wiring Diagram

Enclosure Assembly
The very solid cabinet is constructed from 36mm mdf with all external edges rounded off with a 10mm radius. Inside there is just one partition separating the woofer volume from the crossover compartment. This crossover compartment is open on the back for easy access. The partition is placed at an angle to minimize standing waves between parallel walls. Damping material consists of a 100% ll of the woofer volume with Acousta-Stuff polyester bre wool, no further measures are needed. The thick cabinet walls make the loudspeaker very sturdy. All the drivers are recessed in the bafe and on the rear there is a single pair of high-quality binding posts. The cabinets are nished in matt black paint, together with the black anodised cones, domes and face-plates this gives a StealthLike look to the speakers.

20134 1" Soft Dome Tweeter
Textile dome with aluminum VC former Smooth response Round plastic faceplate Ferrouid-cooled voice coil Made by Philips for JAMO

00 (1-3)

#299-945..$4

Compare to $12

40 watts RMS 8 ohms 1,400-19,000 Hz SPL: 86 dB 1W/1m Dimensions: A: 3-3/8", B: 3-1/8", C: 7/8".
Compare to $23 #299-942..$500(1-3)
20476 4-1/2" Square Frame Midrange 16 Ohm
Damped paper edge. Great for midrange or low power full range applications. 15 watts RMS 16 ohms 159-8,500 Hz SPL: 86 dB 1W/1m Dimensions: A: 4-1/16", 5-1/16" diagonally, B: 3-3/4", C: 1-3/8".
Compare to $12 #299-915..$400(1-3)
20443 5-1/4" Fiberglass Cone Shielded Woofer
Woven berglass cone, soft plastic dust cap, rubber half roll surround. Magnetically shielded. 40 watts RMS 8 ohms 40-3,500 Hz SPL: 86 dB 1W/1m Dimensions: A: 5-3/4", B: 4-5/8", C: 3".
Compare to $25 #299-940..$600(1-3)
20305 4" Shielded Woofer 4 Ohm
This stout woofer features an attractive stamped steel basket, well-damped polypropylene cone, and a treated screen dust cap. Magnetically shielded. 40 watts RMS 4 ohms 86-10,000 Hz SPL: 87 dB 1W/1m Dimensions: A: 4-3/8"; 4-7/8" diagonally, B: 3-3/4", C: 2-7/8".
Compare to $24 #299-947..$700(1-3)
20470 4-1/2" Sealed Back Midrange
Fully enclosed paper cone midrange with damped paper edge. 25 watts RMS 8 ohms 700-6,000 Hz SPL: 90 dB 1W/1m Dimensions: A: 4-3/4", 5-1/16" diagonally, B: 4-1/4", C: 1-5/8".

#299-952..$500(1-3)

20307 5-1/2" Treated Paper Cone Woofer
Smooth-sounding 5-1/2" woofer with treated paper cone and foam surround. 40 watts RMS 8 ohms 40-4,000 Hz SPL: 84 dB 1W/1m Dimensions: A: 6", B: 4-3/4", C: 2-1/2".
Compare to $18 #299-902..$800(1-3)
20435 5-1/2" Fiberglass Cone Woofer
Woven berglass cone, soft plastic dust cap, rubber half roll surround. 40 watts RMS 4 ohms 40-4,000 Hz SPL: 87 dB 1W/1m Dimensions: A: 5-3/4", B: 4-5/8", C: 2-5/8".

#299-935..$700(1-3)

Compare to $26
20422 6" Treated Paper Cone Woofer 6 Ohm
Premium woofer with treated paper cone, rubber surround, and 4-layer VC. Oversized stamped steel basket. 80 watts RMS 6 ohms 40-3,500 Hz SPL: 89 dB 1W/1m Dimensions: A: 6-1/16", B: 4-3/4", C: 2-5/8".

20418 8" Woofer

8" woofer with treated paper cone and foam surround. The four-layer voice coil provides increased power handling and bass response. 40 watts RMS 8 ohms 40-4,000 Hz SPL: 90 dB 1W/1m Dimensions: A: 8-1/8", B: 7-1/8", C: 3-1/4".

#299-914..$12

Compare to $22

Compare to $20 #299-065. $1080 (1-3)
8" Paper Cone Woofers 12 ohm
High gloss black treated paper cone with rubber surround Underhung 4-layer voice coil for low distortion Very efcientover 91 dB SPL Available with and without magnetic shielding Well-made, attractive, and efcient 8" woofers that will work in vented or closed box systems.
W6-KA638-SH 6-1/2" Paper Cone Shielded Woofer
High gloss treated paper cone with rubber surround Large diameter spider for improved excursion Magnetically shielded Excellent midbass driver for music playback or home theater systems. Parameters are optimized for closed box designs. 40 watts RMS VCDIA: 1" 8 ohms 55-6,000 Hz Fs: 67 Hz SPL: 85.1 dB 1W/1m VAS: 0.63 cu. ft. QTS: 1.00 XMAX: 3 mm Dimensions: A: 6-1/2", B: 5-3/4", C: 3-5/8".
W8-12T 12PS 8" Shielded Woofer
40 watts RMS VCDIA: 1" 12 ohms 40-3,500 Hz Fs: 41 Hz SPL: 92 dB 1W/1m VAS: 3.2 cu. ft. QTS: 0.53 XMAX: 2 mm Dimensions: A: 8", B: 7-1/2", C: 4-1/8".
Compare to $25 #299-067..$1400 (1-3)
W8-12T 12P 8" Woofer
40 watts RMS VCDIA: 1" 12 ohms 40-12,000 Hz Fs: 43 Hz SPL: 91.5 dB 1W/1m VAS: 2.7 cu. ft. QTS: 0.56 XMAX: 2 mm Dimensions: A: 8", B: 7-1/2", C: 3-1/2".
Compare to $25 #299-063.$1400 (1-3)

#299-068..$1400 (1-3)

Peerless/Vifa Buyout, Limited Quantities!
Factory original replacements. Limited availability buyout, while supplies last. Please visit parts-express.com for more information!
Peerless/Vifa BC25TG19-04 1" Dome Tweeter 4 Ohm
Sculpted, recessed-loaded round 4-hole faceplate 1" textile dome Ferrouid cooled voice coil Used by one of Europes leading speaker system manufacturers 50 watts RMS VCDIA: 1" 4 ohms 1,000-20,000 Hz Fs: 1,070 Hz SPL: 94 dB 2.83V/1m Dimensions: A: 4-1/8", B: 3" plus notches for terminals, C: 1-1/4".
Compare to $22 #279-175..$1500(1-3)
Peerless 830643 5-1/4" SDS Shielded Woofer
Premium sculpted pincushion stamped steel chassis Poly cone with rubber edge Shielded motor
60 watts RMS VCDIA: 1" 8 ohms 78.5-6,000 Hz Fs: 78.5 Hz SPL: 88 dB 2.83/1m VAS: 0.18 cu. ft. QTS: 0.56 XMAX: 3 mm Dimensions: A: 6" diagonally, 5-1/4" nominal, B: 4-5/8", C: 3".
Compare to $39 #299-244..$1988(1-3)
Peerless 811582 1" Dome Tweeter
Compact, recessed-loaded round 4-hole faceplate 1" textile dome Great for lower power/higher crossover point designs 40 watts RMS VCDIA: 1" 8 ohms 2,000-20,000 Hz Fs: 1,070 Hz SPL: 89 dB 1W/1m Dimensions: A: 3-1/8", B: 2-1/2", C: 15/16".
Peerless SDS 835004 6-1/2" Woofer 4 Ohm
Premium sculpted stamped steel chassis Coated paper cone with rubber edge Shielded motor

#279-179..$14

40 watts RMS VCDIA: 1" 4 ohms 38-6,000 Hz Fs: 37.8 Hz SPL: 89.5 dB 1W/1m VAS: 1.38 cu. ft. QMS: 5.35 QES: 0.27 QTS: 0.26 XMAX: 3 mm Dimensions: A: 7.15" (6.45" across ats), B: 5.75", C: 3".

VCDIA: 1" Le:.1 mH Impedance: 4 ohms Re: 3.7 ohms Frequency range: 100-10,000 Hz Fs: 138 Hz SPL: 86 dB 2.83V/1m VAS:.035 cu. ft. XMAX: 1.5 mm QMS: 7.19 QES: 2.20 QTS: 1.69 Dimensions: A: 4-1/2", B: 4", C: 2-9/16". #290-372: All specs the same except: Le:.2 mH Impedance: 8 ohms Re: 7.3 ohms SPL: 84 dB 2.83V/1m QMS: 6.81 QES: 2.02 QTS: 1.56.
#290-370: Power handling: 40 watts RMS/70 watts max
#290-330: Power handling: 120 watts RMS/240 watts max VCDIA: 1-1/2" Le:.5 mH Impedance: 4 ohms Re: 3.6 ohms Frequency range: 35-1,500 Hz Fs: 38 Hz SPL: 90.4 dB 2.83V/1m VAS: 3.59 cu. ft. QMS: 5.27 QES: 1.43 QTS: 1.17 XMAX: 3.5 mm Dimensions: A: 12", B: 11", C: 5-1/8". #290-335: All specs the same except: Le:.6 mH Impedance: 8 ohms Re: 7.0 ohms SPL: 87 dB 2.83V/1m QES: 1.98 QTS: 1.44.
#290-330 (4 ohm GW-212/4) Regularly #290-335 (8 ohm GW-212/8).. $2453

15" Woofer

Power handling: 150 watts RMS/300 watts max VCDIA: 1-1/2" Le:.93 mH Impedance: 8 ohms Re: 7.2 ohms Frequency range: 20-2,500 Hz Fs: 29 Hz SPL: 90 dB 2.83V/1m VAS: 9.69 cu. ft. QMS: 5.07 QES: 1.29 QTS: 1.03 XMAX: 3.5 mm Dimensions: A: 15", B: 13-3/4", C: 5-1/2" Mfg. #GW-215/40/8. Regularly
#290-370 (4 ohm GW-204/4s) Regularly #290-372 (8 ohm GW-204/8S).$967
5-1/4" Shielded Woofer
#290-374: Power handling: 70 watts RMS/130
watts max VCDIA: 1" Le:.2 mH Impedance: 4 ohms Re: 3.6 ohms Frequency range: 80-6,000 Hz Fs: 85 Hz SPL: 90 dB 2.83V/1m VAS:.18 cu. ft. XMAX: 2.0 mm QMS: 3.18 QES:.87 QTS:.68 Dimensions: A: 5-1/4", B: 4-3/4", C: 3-1/8". #290-376: All specs the same except: Le:.4 mH Impedance: 8 ohms Re: 7.1 ohms SPL: 87 dB 2.83V/1m QMS: 3.18 QES: 1.10 QTS:.81.

#290-346.. $4292

Balboa Series
#290-374 (4 ohm GW-205/4s) Regularly #290-376 (8 ohm GW-205/8s)..$1133

6-1/2" Woofer

#290-300: Power handling: 90 watts
These woofers provide added versatility over single voice coil woofers by allowing the use of both channels of a stereo amplier to drive one speaker, and the ability to wire the voice coils in varying congurations. The 6-1/2" woofer features a fully shielded motor! Note: Specications listed are with voice coils connected in parallel.
GW-406D 6-1/2" Shielded DVC Subwoofer

#290-362..$2429

GW-412D 12" DVC Subwoofer
Power handling: 130 watts RMS/ 260 watts max VCDIA: 1-1/2" Le:.5 mH Impedance: 4 ohms Re: 3.4 ohms Frequency range: 33-1,500 Hz Fs: 38 Hz SPL: 94 dB 2.83V/1m VAS: 3.83 cu. ft. QMS: 5.76 QES:.83 QTS:.73 XMAX: 3.5 mm Dimensions: A: 12", B: 11", C: 5-3/16".
#290-320 (4 ohm GW-210/4) Regularly #290-325 (8 ohm GW-210/8). $1998

#290-367..$3591

Delmar Series 6-1/2" Woofer
RMS/150 watts max VCDIA: 1-1/2" Le: 2.1 mH Impedance: 8 ohms Re: 7.4 ohms Frequency range: 46-3,000 Hz Fs: 59 Hz SPL: 87 dB 2.83V/ 1m VAS:.27 cu. ft. QMS: 6.31 QES:.50 QTS:.46 XMAX: 4.0 mm Dimensions: A: 6-7/8",B: 6-1/8", C: 5-7/8". #290-307: All specs the same except: Le:.90 mH Impedance: 4 ohms Re: 3.7 ohms Fs: 46 Hz SPL: 85.1 dB 2.83V/1m VAS:.35 cu. ft. QES:.97 QTS:.87.
#290-306: Power handling: 110 watts
The Delmar Series features aluminum die-cast frames, rubber surrounds, and vented pole pieces with bumped back plates.

Malibu Series

Butyl rubber surrounds are superior to foam in two important ways. First, the butyl rubber resists moisture and will not dry rot, providing years of service. Second, the rubber surround, due to its superior damping characteristics, will greatly reduce cone break up and ensure low distortion. These woofers are ideal for replacing and upgrading old, worn out drivers. They all feature a polypropylene cone, vented pole piece, foam gasket, soft poly dust cap, and stamped steel frame.
#290-350: Power handling: 60 watts RMS/85 watts max VCDIA: 1-1/2" Le:.26 mH Impedance: 8 ohms Re: 7.3 Frequency range: 55-3,000 Hz Fs: 58 Hz SPL: 85 dB 1W/1m VAS:.41 cu. ft. QMS: 3.47 QES: 1.15 QTS:.86 XMAX: 4.4 mm Dimensions: A: 6-1/2", B: 5-5/8", C: 3-1/4". #290-351: All specs the same except: Le:.40 mH Impedance: 4 ohms Re: 3.6 ohms Fs: 54 Hz SPL: 90 dB 2.83V/1m VAS:.42 cu. ft. QMS: 3.05 QES:.71 QTS:.57.
#290-306 (8 ohm GW-6PC/8) Regularly #290-307 (4 ohm GW-6PC/4). $2789
#290-312: Power handling: 140 watts
RMS/ 270 watts max VCDIA: 1-1/2" Le: 1.2 mH Impedance: 4 ohms Re: 3.7 ohms Frequency range: 40-4,000 Hz Fs: 44 Hz SPL: 91 dB 2.83V/1m VAS:.75 cu. ft. QMS: 5.95 QES:.49 QTS:.45 XMAX: 3.55 mm Dimensions: A: 8-3/16", B: 7-3/16", C: 4-3/16". #290-314: All specs the same except: Le:.99 mH Impedance: 8 ohms Re: 7.24 Fs: 55 Hz SPL: 88 dB 2.83V/1m VAS:.51 cu. ft. QES:.62 QTS:.56.

#290-397..$15528

#270-082.. $8
3-1/4" Piezo Tweeter
Specications: Power handling: 50 watts RMS/75 watts max Frequency response: 3,500-27,000 Hz SPL: 94 dB Mfg. #GT-1005 Dimensions: A: 3-1/4", B: 3-1/4", C: 2-1/2".

Regularly 50

GW-18120 18" Pro Woofer
Specications: Power handling: 600 watts RMS/1,200 watts max VCdia: 4" Le: 3.99 mH Impedance: 8 ohms Re: 7.31 ohms Frequency range: 40-1,500 Hz Fs: 38 Hz SPL: 95.5 dB 2.83V/1m Vas: 7.67 cu. ft. Xmax: 5.4 mm Qms: 13.390 Qes: 0.59 Qts: 0.57 Dimensions: A: 18-1/4", B: 16-3/4", C: 7".

#290-398. $17730

#270-011.. $225
2" x 5" Piezo Horn
Specications: Power handling: 50 watts RMS/75 watts max Frequency response: 3,500-27,000 Hz SPL: 94 dB Mfg. #GT-1016 Dimensions: A: 5-3/4", B: 2-3/4", C: 2".

Bullet Piezo Horn Driver

Specications: Power handling: 100 watts RMS Frequency response: 1,800-30,000 Hz SPL: 92 dB 1W/1m Mounts to any 1-3/8"-18 TPI horn Mfg. #GT-400CD Dimensions: Diameter: 2-7/16", Depth: 1-1/2".

270-069...$350

Regularly 25

270-041.. $2

Piezo Horn Mid/Tweeter
Specicatio ns: Power handling:
GM-450PB 2" High Frequency Horn
Large format horn for 2" compression drivers 90 H x 40 V dispersion Useable to 500 Hz Excellent pattern control and directivity down to the lower frequency limit of 500 Hz. The 3/8" thick ABS construction with reinforcing ribs supports the heaviest of 2" exit compression drivers with ease. Specications: Throat diameter: 2" Bolt pattern: four holes on 4" diameter circle Nominal coverage: 90 W x 40 V Cutoff frequency: 500 Hz Horn dimensions: 17.7" W x 9.8" H x 9.1" D Cutout dimensions: 15-3/4" W x 8" H.
60 watts RMS/75 watts max Frequency response: 1,800-30,000 Hz SPL: 90 dB Mfg. #GT-1025 Dimensions: A: 7-1/4", B: 3-1/10", C: 4".

280-062...$259

Dayton Audio Rack Screws 100 Pcs.
#10-32 x 5/8" screw made specically for attaching SPECIAL shelves and panels to rack systems. The screws feature an easy-start tip that inserts into the threaded screw hole and maintains its place while starting the screw. The black nylon washer is molded to match the taper of the screw head ensuring the washer is centered with respect to the screw. Black oxide nish. 100 pcs. per package. Mfg. #RS1032PK.

M-8x Power Conditioner

#262-844..$13.99LIST $1030
AC noise ltering to reduce radio frequency and electromagnetic interference (RFI/EMI) Spike & surge protection ensures equipment stays safe and your power stays clean 9 total outlets 8 rear panel outlets and 1 front panel outlet Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters 15 amp rating, with circuit breaker Front panel indicator LED lets you know that your equipment is being protected Three-year limited manufacturers warranty
Specications: Line cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating voltage: 120 VAC, 60 Hz Energy dissipation: 170 joules Dimensions: 1.75" H x 19" W x 7.5" D.
Dayton Audio Vented Rack Panels
Flanged edges for structural support One-piece steel construction Heavy-duty 0.065" steel Black matte painted nish
Vented rack panels from Dayton Audio are ideal for providing a completed look to your equipment rack without reducing airow to critical components. Made from 15 gauge perforated steel and painted matte black. Flanged edges reduce exing. Fits standard 19" racks.
Part # 262-854 262-856 Mfg. # RPV1RU RPV2RU Rack Units Height 1-3/4" 3-1/2" List Price $8.99 12.99 Regular Price $6.32 9.24 Special Price $6.00 8.78
#248-783.. $70.00LIST $5995EACH

M-8Lx Power Conditioner

Dayton Audio Blank Rack Panels
All the great features of the M-8x but adds two slide out, swiveling light xtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.
#248-784.. $110.00LIST $8995EACH

M-8Dx Power Conditioner

Blank rack panels from Dayton Audio are ideal for providing a completed look to your equipment rackll in unused spaces or make custom mounting panels and patch panels. Made from 15 gauge steel and painted matte black. Flanged edges reduce exing. Fits standard 19" racks.

BOSS 7" LCD Headrest Monitors
7" widescreen TFT LCD active matrix display 1152 x 234 pixel resolution 450 NITS brightness Wide angle, off-axis visibility Front panel controls On-screen menu system Audio/video input controls Wireless remote control
#267-795.. $38.50LIST $2044
Pyle PLCD16MRWB Marine Weather Band With Wired Remote Control AM/FM CD Receiver
The ultimate in convenience while you are on the road, the BOSS 7" LCD headrest monitor keeps kids occupied and content. Dual IR audio output on model BV7HIR allows the viewers to hear the audio content while the front seat passengers are not disturbed.
Weather Band radio Anti-theft detachable face CD-R/RW compatible RCA line out RCA aux input Full-function wired remote control Fullfunction LCD display 30 station memory Auto best station memory Mute control Clock function Full illumination faceplate with dim function Anti-skip CD mechanism Power output: 50 watts x 4 max.
#265-352 (BV7HIR with IR audio). $157.00 LIST $8490 EACH #265-354 (BV7HR without IR audio). $148.00 LIST $7990 EACH
BOSS CAM20 Mini Rear View Camera

With IR Illumination

Use with compatible BOSS head units with LCD monitors. Camera features 4 mm wide-angle lens and IR LED illumination for easy backing at night. A built-in microphone allows the user to take directions when backing a large vehicle or backing in congested spaces. Swivel base permits easy adjustments to meet your specic needs. Input: 12 VDC. Outputs: RCA audio/video.
#267-792. $281.61LIST $13879
BOSS Chaos Exxtreme Speaker Pairs
#265-350.. $49.95 LIST $2650 EACH
Poly injection woofer cone with 1" aluminum voice coil and rubber surround 1" polyimide cone midrange and 1/2" polyimide cone tweeter (CH5530 andCH6530) 1" polyimide dome tweeter (CH5720) 2" polyimide cone midrange and 3/4" piezo tweeter (CH6930) Includes grills and installation hardware 4 ohm impedance One-year manufacturers warranty One look and you will know why they are called Chaos Exxtreme. The red metallic poly injection cone delivers clear sound while the rubber surround provides smooth response and durability. #265-334

Part # 265-334 265-332 265-336 265-330 Mfg. # CH5530 CH6530 CH5720 CH6930 Type Triaxial Triaxial Coaxial Triaxial Size 5-1/4" 6-1/2" 6" x 8"/5" x 7" 6 x 9"

#265-332

#265-336

#265-330

Power Handling (Watts) RMS Peak 200 400
Frequency Response (Hz) 100 - 18,- 18,- 18,- 20,000
Mounting Depth 1-11/16" 2-1/8" 2-1/16" 3-3/16"
List Price $24.00 27.00 27.00 39.00
Price Pair $15.50 17.50 17.50 24.90
Pioneer UD-GXX8 Spoke Subwoofer Grills
Stylish silver appearance Easy Installation ABS construction

Vented Subwoofer Boxes

Slotted port design 3/4" MDF enclosure All joints glued and caulked Black carpet covering SPECIAL Gold terminal posts Goldwoods ported boxes are CNC cut from 3/4" MDF and glued air tight, producing a strong, tight, rock-solid box, then ported to extended low frequency response. High quality, black polyester carpet and audiophile-grade gold input terminals add the nishing touch. Sold individually.
Part # 260-628 260-630 260-632 260-634 Description Single 10" Single 12" Dual 10" Dual 12" Dimensions Volume (H x W x D) (cu. ft.) 16" x 14.25" x 12" 1.1 18" x 16" x 13" 1.5 32" x 14.25" x 12" 1.1 x2 34" x 16" x 13.5" 1.5 x2 Regular Special Price Price $28.50 $22.80 41.50 33.20 51.00 40.80 64.00 51.20
After you have installed your newly purchased subwoofers, give them the nal classy touch with Pioneers new spoke grills. After installation, your subwoofers will look sweet and stylish. Compatible with specic Pioneer models (visit parts-express. com for details) and other equivalent-sized subwoofers.

UD-G258 10" Grill

Dimensions: Overall diameter: 11-3/8", Inside diameter: 9-3/16", CTC hole spacing across diameter: 10-1/16", Overall height: 2-1/16".
#267-196.. $20.00LIST $12

UD-G308 12" Grill

Dimensions: Overall diameter: 13-1/4", Inside diameter: 10-7/8", CTC hole spacing across diameter: 11-7/8", Overall height: 2-3/8".
#267-197.. $20.00LIST $1200EACH

Truck Boxes

3/4" MDF sealed enclosure Black carpet covering Gold terminal posts Sold individually These Goldwood truck boxes are CNC cut using 3/4" MDF and glued air tight, producing a strong, tight, rocksolid box. High-quality plush black polyester carpet and audiophilegrade gold input terminals put the nishing touch on these boxes.