Click Here to check out this knife: http://www.bladehq.com/cat--Benchmade-5400-Axis-Dual-Acti... The 5400SBK Serum is a ...
A demo of the setup Sherline 5400 Mill Xylotex 3 axis Drive Box w/269oz.in. steppers Powered by Ubuntu 8.04 w/EMC2 Live CD ...
Worked the first time!
CNC Knee Mills
powered by or
The 5-GLS 3 axis version The 5-BVK with it's wide saddle and the Anilam 3300 CNC
Optional version of 4-GL and 5GL available with redesigned X axis
2-VS Series: 2 & 3 axis CNC
R-8 or # 30, 3 Hp.
This is the manual version. A photo of the machine with the CNC fitted is not available at the time of printing. This machine can also be fitted with the gearless vector drive head as on the machines on following pages, This gives spindle control on the CNC for speed settings, automatic start and stop and tapping.
Anilam 5000 or 6000 series controls with up to 5 axes Heidenhain TNC 124, 310, 426 or 430 controls additional ram up to 64 MB off-line software with DXF file processing 1 micron linear feedback systems spray mist systems digital readouts on the quill with axis coupling and out of position detection with operator setting of tolerance band. optional stop, and block delete additional M functions for controlling external devices like fixtures, vacuums, etc. low ...