Babyfon sendet bei jedem kleinsten Gerusch
Rckkopplung, da Abstand zwischen den Gerten zu gering ist Steckernetzteil ist nicht an die Stromversorgung angeschlossen Stecker des Steckernetzteils steckt nicht richtig im Gert Akkus haben ihre Lebensdauer berschritten Ansprechempfindlichkeit ist zu hoch eingestellt
Abstand zwischen den Gerten vergrern oder verringern Sie die Lautstrke am Empfnger (B14) berprfen Sie den Anschluss Stecker richtig in die Anschlussbuchse (A5/B15) stecken Akkus austauschen Ansprechempfindlichkeit verringern (A4)

Zulassung

Dieses Vivanco Funkprodukt entspricht der europischen R&TTE Richtlinie fr Funksysteme in nicht harmonisierten Frequenzbereichen. Der Verkauf und Betrieb dieser Systeme ist in folgenden Lndern mglich: Deutschland, Frankreich, Niederlande, Belgien, Spanien, Portugal, Italien, Schweiz, sterreich, Finnland, Norwegen, Schweden, Dnemark, Polen, Griechenland. In allen nicht genannten Staaten ist der Betrieb nicht zulssig. Die Konformittserklrung finden Sie am Ende dieses Heftes.

Seite 11

Babyfon BM 66
Babyfon is one of the leading brands for wireless baby monitors in Europe. We have devoted ourselves for many years to the development and production of reliable, highquality products. The Babyfon BM 66 continues in this long-standing tradition. A B 21 Baby device On/Off/Channel selector switch Power-on lamp Microphone Sensitivity setting AC adapter connector AC adapter Battery compartment lid Screw for battery compartment lid Battery compartment Belt clip Parent device On/Off/Channel selector switch Power-on lamp Speaker Volume control AC adapter connector AC adapter Battery compartment lid Screw for battery compartment lid Battery compartment Charge contacts for battery pack Belt clip

Practical tips

Wireless baby monitors create electrical, magnetic and electromagnetic fields. Electrical and magnetic fields in the baby's vicinity can be avoided completely by operating the baby device with a battery pack or batteries. During mains operation, place the AC adapter as far away from the baby as possible. Electromagnetic fields occur during wireless operation. Place the baby device at least 1 metre away from the baby. Never cover the baby device (e.g. with a towel, sheet, etc.) Use a damp cloth to clean the Babyfon

Preparing your Babyfon

1. Place the baby device at least 1 metre away from your baby. Never place the baby device in the cot or the playpen. Connect the AC adapter to the connector on the baby device.

Important information

Please read these instructions carefully. This Babyfon is only intended as an aid. It is not a substitute for responsible, correct parental supervision and should therefore not be used as such. Never place the Babyfon and the connecting cable within the baby's reach; please observe a minimum distance of 1 metre. Never place the baby device in the baby's cot or playpen. Never use the Babyfon near water or in damp places. Avoid exposure to extreme heat or strong light. Never open the housings or AC adapters (danger of electric shock!). Make sure that the local mains voltage corresponds to the voltage specified on the AC adapter. Avoid touching the battery and charging contacts. Do not touch the contacts with metal objects.
Plug the AC adapter into a mains socket as far away from the baby as possible.
Switch on the baby device by selecting channel A or B. Take the parent device and move away from the baby device. If the units are placed too close together, there may be a high-pitched whistling sound.
Connect the second AC adapter to the connector on the parent device.
Plug the second AC adapter into a mains socket.
Switch on the parent device and select the same channel as on the baby device.
Your Babyfon is now ready for use. Transmission begins automatically when the baby device is activated by a noise. 10. Using a radio, for example, you can test whether transmission is ensured at the location you have chosen.

Seite 13

Using your Babyfon
1. 2. Make sure that both devices are switched on and that the same channel is selected. Set the response sensitivity of the microphone on the baby device to the level you require. To begin with, we recommend a middle position that can later be adjusted as required.
4. 5. When using standard 1.5V AAA battery packs, these must be removed from the battery compartment for charging and recharged using a standard battery pack charger. When using the Babyfon battery pack EAB 4, this can be charged using the charging function integrated in the parent device. When inserting the battery pack, make sure that the polarity is correct and that the charging contact has been made in the battery compartment (see B20 on parent device).
Set the volume on the parent device to the level required. If the baby device is activated by a noise in the baby's bedroom, transmission starts automatically and the power-on lamp of the parent device changes from green to red for the duration of the transmission.

Explanation of functions

Digital pilot tone / preventing interference Besides the sounds made by the baby, the baby device also transmits an inaudible signal tone. The parent device only begins reception when this signal tone is received. This practically rules out the reception of external wireless baby monitors. In rare cases, however, interference from other wireless devices in the vicinity may occur. In the event of such interference or poor reception, switch both devices to the other channel. 250 m range In ideal conditions, the range of your Babyfon outdoors is approx. 250 metres. Obstacles such as walls, ceilings or large objects affect the range. The more obstacles there are between the baby and parent devices, the smaller the range becomes.

Using batteries or rechargeable battery packs
Parent device 1. Remove the belt clip from the device by sliding the clip downwards.
Open the battery compartment by loosening the screw on the battery compartment lid. Transmitting power: max. 10 mW Operating temperature: 10 to 40 C
Insert four 1.5 V AAA batteries in the battery compartment, observing the correct polarity. You can use: a. Non-rechargeable 1.5V AAA batteries b. Standard AAA battery packs c. Babyfon battery pack EAB 4 (available from specialist dealers)
Slide the battery compartment lid back on to the battery compartment and tighten the screw again. This ensures that the battery compartment cannot be opened by accident. To re-attach the belt clip to the device, insert and slide upwards. The charging time is approx. 15 hours.
Baby device Proceed as you did with the parent device. However, Babyfon battery packs cannot be used and charged in the baby device. Battery alarm A signal tone and the flashing power-on lamp warn you as soon as the battery pack or batteries in the parent device are empty. You should then insert new batteries or recharge the battery pack. Disposal of batteries / battery packs Consider the environment when disposing of the batteries or battery packs, which must not be thrown away with domestic rubbish. Do not use old and new batteries or different battery types simultaneously. Remove batteries from the device if it is not to be used for a long time.

Specifications

No. of channels: Frequency Power supply: 2 40.66 40.70 MHz Transmitter: Receiver:
AC adapter plug 9 Volt/ 200mA or 4 AAA batteries (batteries not included) AC adapter plug 9 Volt/ 200mA or battery pack (EAB 4 battery pack is available from specialist dealers) or 4 AAA batteries
Subject to alteration. Babyfon is a registered trademark of Vivanco AG, Ahrensburg

Seite 15

Trouble-shooting
If your Babyfon BM 66 should not function properly, please proceed as follows: 1. Using the following table of malfunctions, try to find and correct the fault. 2. Read the corresponding section in these instructions carefully. 3. Look on the Internet at www.vivanco.com to see whether the fault and its correction are described. 4. Ask your dealer. 5. Call the telephone hotline 01805 / 10 (0.14/min.) for Germany (charges may vary when calling from a mobile phone). You will find contacts for Europe at www.vivanco.com.

Problem No transmission / no sound Possible cause Different channels set on both devices Transmitter does not switch automatically to transmit Devices are outside range Transmitter is not by baby or too far away Batteries are empty Unfavourable choice of channel Solution Set both devices to same channel (A1/B11) Increase response sensitivity (A4) Reduce distance between devices Reduce distance of transmitter from baby, observing minimum distance of 1 metre If batteries are used, replace them Change to another channel (A1/B11)

Warranty

The warranty period is 12 months from the date of purchase. Please contact your specialist dealer or Vivanco Service Ewige Weide 17, D-22926 Ahrensburg/Germany A copy of the purchase receipt must be included.
Interference or another voice can be heard during transmission Loud beeping and whistling noise Battery packs no longer being charged
Babyfon transmits every tiny sound
Feedback due to insufficient distance between devices AC adapter plug is not connected to power supply Plug of AC adapter not connected properly to device Battery packs have come to the end of their service life Response sensitivity set too high
Increase distance between devices or reduce volume on receiver (B14) Check connection Insert plug properly into connector socket (A5/B15) Replace battery packs Reduce response sensitivity (A4)

Licence

This Vivanco FM product conforms with the European R&TTE directive for FM systems in non-harmonised frequency ranges. These systems can be sold and operated in the following countries: Germany, France, the Netherlands, Belgium, Spain, Portugal, Italy, Switzerland, Austria, Finland, Norway, Sweden, Denmark, Poland, Greece. Operation is not permitted in all countries not named. The declaration of conformity is included at the end of this manual.

Seite 17

Babyfon est l'une des marques principales de dispositifs de surveillance sans fil pour bbs en Europe. Depuis des annes, nous nous consacrons au dveloppement et la fabrication de produits fiables et haut de gamme. Le Babyfon BM 66 est la continuation de cette tradition longue de plusieurs annes. A Unit-enfant 1 Marche/Arrt et slecteur de canal 2 Voyant de contrle de fonctionnement 3 Microphone 4 Rglage de sensibilit 5 Prise pour adaptateur secteur 6 Adaptateur secteur 7 Couvercle du compartiment des piles 8 Vis pour le couvercle du compartiment des piles 9 Compartiment des piles 10 Clip ceinture B Unit-parents 11 Marche/Arrt et slecteur de canal 12 Voyant de contrle de fonctionnement 13 Haut-parleur 14 Rglage du volume 15 Prise pour adaptateur secteur 16 Adaptateur secteur 17 Couvercle du compartiment des piles 18 Vis pour le couvercle du compartiment des piles 19 Compartiment des piles 20 Contacts de charge pour pack d'accus 21 Clip ceinture