Le chauffe-biberon ne chauffe pas : - vrifiez que lappareil est branch. - vrifiez que le bouton de mise en marche est activ. Les cycles de chauffe sont trop courts ou trop longs : - il y a peu ou trop deau, mettez uniquement la dose prescrite.
Thank you for choosing our bottle warmer at home or in the car. We suggest you read these instructions carefully in order to gain full bnefit from your steriliser. We also recommend you keep them in case you need to refer to them at a later date.
TECHNICAL CHARACTERISTICS

For use at home

Power input: 220/230 V - 50 Hz Wattage: 320 W Quick: 2 1/2 minutes for one bottle. 3 minutes for one jar.

For use in car

Power input: 12 V DC Wattage: 100 W
Universal: for all types of baby bottle and jar Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic equipment away with un-sorted household waste, but dispose of it at a selective collection point.
PLEASE COMPLY WITH THESE SAFETY INSTRUCTIONS
Never leave your child without supervision while the appliance is working. Check that your electrical power supply voltage is compatible with the appliance (see the details indicated beneath the appliance). Use this appliance solely to heat baby bottles and jars. Any other use might prove dangerous. Never switch on the appliance before pouring in a sufficient quantity of water. Never add any product of any kind (salt water, medication, detergents) to the water: this will damage the appliance. Never use the bottle warmer in damp surroundings and do not place directly under the tap. Never immerse the appliance in water or any other liquid. Never leave the appliance close to any source of heat such as radiators, sunny windows, etc. Always use the bottle warmer on a completely flat and dry surface, out of the reach of children. Do not use the bottle warmer out of doors. Always use the baskets to heat bottles and jars, because failure to do so could damage the appliance. Don't leave the bottle or jar to heat too long, this could encourage the development of germs in the milk or food. The bottles will be very hot when they come out of the warmer. Take care when removing them. Do not move the appliance while it is in operation or if it contains hot water. During the heating process the appliance can get very hot. Never touch anything other than the "On" button. Leave the bottle warmer to cool for about 15 minutes before using it again. Never touch the inside of the tank while the appliance is in use, or immediately after use. Always unplug the appliance before cleaning or filling and after each use. Do not leave the power cable at the edge of a table or work-surface. Do not place it on a hot surface. Do not leave the power cable dangling where a child could reach it. In the interests of safety, only use Babymoov accessories and spare parts and never dismantle the appliance. Avoid using your appliance if it is not working properly or if it is damaged. If this happens, contact the Babymoov after-sales service.

For using in car : Never use the bottle warmer while the vehicle is in motion. Leave your engine running when using the bottle warmer to avoid draining your battery. The car adapter cord is specially designed for this bottle warmer: never use it with other appliances. Regularly check that the cigarette lighter socket in your car. Clean it if necessary. If you have just used your cars cigarette lighter, allow it to cool for five minutes in the open position before plugging in with the bottle warmer.
BOTTLE WARMER AT HOME OR IN THE CAR Instuction Manual

WARNINGS

The quantities given in the table are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. N.B.: the material and the thickness of the bottle and the presence of a detachable base are elements that can affect the bottles temperature. ATTENTION: to elliminate the risk of burns, always check the temperature of the food before giving it to your baby. For a bottle, shake it well to mix the milk. Pour a drop onto the inside of your wrist to check its temperature. For a jar, mix the contents and try it in order to check it is not too hot. If the power supply cable gets damaged it must be replaced by the manufacturer, the after-sales service or people with similar qualifications, in order to avoid any risk of danger. This appliance is not intended for use by persons (including children) with impaired physical, mental, or sensory abilities, or by persons lacking in experience or knowledge, unless the person responsible for their safety has supervised and instructed them in the use of this appliance. Chlidren should be supervised to ensure that they do not play with the appliance.

OPERATING INSTRUCTIONS

d - Baby Food Jar Tray a - Measuring cup e - Adaptor ring b - Heating chamber f - Indicator ligh c - Bottle tray Points to respect for trouble-free use: - always check that the bottle is slightly open (not screwed down too tightly). - always remove the lid from the jar. - optimum heating will be guaranteed provided operation is not interrupted. - use tap water only, with no added product. NB: always use the large basket to heat bottles and jars. g - ON button h - Mains power cord i - Car adaptor plug

By using the amounts of water indicated in the tables below, a baby bottle or jar will be heated to 30/33C, which is the temperature paediatricians recommend. The quantities given are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. For using at home: Place the Bottle Warmer on a flat and stable surface. Be sure the warmer and the cord are out of the reach of children. Plug the power cord into wall outlet. You can see the indicator light illuminates in green color. Amount of water Amount of water 1. Fill the measuring cup with water, to be put in the to be put in the Amount of content following the instructions shown above, measuring cup for BW measuring cup for BW in bottle for bottle content in for bottle content in then pour the water into the heating room temperature fridge temperature chamber. Your can then place the cup back to the holder. 60 ml 7 ml 9 ml 90 ml 8,5 ml 9,5 ml 2. Place the bottle tray into the heating 120 ml 9 ml 10 ml chamber. 150 ml 9,5 ml 10,5 ml 180 ml 9,5 ml 11 ml 3. Place the bottle into the bottle tray. If you are using standard/small bottle, 210 ml 10 ml 11 ml place the adaptor ring around the bottle 240 ml 10 ml 11,5 ml for better warming result. 270 ml 10 ml 12 ml 300 ml 10 ml 13 ml 4. For warming baby food jar, remove the 330 ml 10,5 ml 13 ml lid and place the jar in the Food Jar Tray and then put into the heating chamber. Amount of water Please note the bottle tray should be Amount of water to be to be put in the put in the measuring placed inside the heating chamber first.
Weight of baby jar cup for BW for baby jar in room temperature measuring cup for BW for baby jarin fridge temperature
5. Press the ON button to start warming cycle. The indicator light illuminates in red color. CAUTION! The steam given off during the warming cycle is very hot. Keeps your hand off the appliance when operation. 6. When the heating cycle finished, bottle warmer will switch off automatically. At the same time, there will be a beeping sound to remind you the bottle is done. 7. Then you can take out the bottle. For baby food jar, use the handle of Food Jar Tray to take it out. You can then unplug the unit. For using in car: Stop the car / vehicle and keep the engine running. 8. Place the Bottle Warmer on a flat and stable surface inside your car and vehicle. Connect the Car Adaptor Plug on to the power cord of the bottle warmer. 9. Plug the Car Adaptor Plug into the cigarette socket. You can see the indicator light illuminates in green color. Fill the measuring cup with water, following the instructions shown above, then pour the water into the heating chamber. Your can then place the cup back to the holder. Repeat steps as above.