BEOLINK

Master Link Handbook

MASTER LINK

PREFACE
This handbook deals with Bang & Olufsens BeoLink (Master Link), paying special attention to the installation requirements applying to it. Consequently, this handbook is intended for dealers and installers. Any product, for example a stereo system, a PC, a natural gas system, etc., that has to be incorporated into a network needs to have certain requirements satisfied by the surroundings in connection with its installation. These requirements must ensure the optimal operation of the system after installation. The same applies to Bang & Olufsens BeoLink. Although the requirements are not many, it is essential that they be known since compliance with the basic requirements often determines whether or not the system is able to operate once the installation has been completed. The handbook gives a brief and precise introduction to the basic rules that must be observed in connection with a BeoLink installation, and it describes how compatibility is achieved between Master Link products and Master Control Link products. The handbook has been designed partly as a reference book but the entire handbook should be read in order to obtain the total overview. Only then will it serve its purpose as a reference book.

CONTENTS

READING INSTRUCTIONS How should I read this handbook GENERAL DESCRIPTION What is a BeoLink system/Master Link system, and what can it do for me? PRODUCT DESCRIPTION Description of BeoLab 3500, BeoLab 2000 and BeoLink boxes SETUPS Description of recommended Master Link setups, compatibility setups, special setups, setups with A/V 7000 and option programming DIMENSIONING Description of how much cable may be used INSTALLATION TYPES Description of various installation types INSTALLATION TIPS Practical advice for use in connection with installation TECHNICAL DESCRIPTION Description of various cables which are typically used TROUBLESHOOTING GUIDE What could be wrong when the system will not operate? GLOSSARY Description of specific words and abbreviations ACCESSORIES LIST

READING INSTRUCTION

This handbook employs various symbols to illustrate audio products, video products and speakers. Unless otherwise specified in the text, these symbols merely have to be understood as covering one of these product areas and not as the specific product which the illustration may depict. Since the handbook is focusing particularly on the basic rules in connection with the installation of the systems, variables which are specific to particular products have been omitted to the greatest possible extent. This means that the handbook will always be relevant in connection with installation of the Master Link; both with regard to products launched prior to the publication of the handbook and products that will be launched later. The basic rules applying to the Master Link will always be the same.

GENERAL DESCRIPTION

What is BeoLink?
BeoLink is a Bang & Olufsen expression that covers: 1. The ability to create and operate audio systems, and 2. The ability to distribute sound from a Bang & Olufsen main room system to other rooms in the home, and to operate the main room system from the rooms connected by means of BeoLink. BeoLink is not a product - it is a number of features that are the result of the intelligent interaction between products, a synergy effect. BeoLink may be obtained in different ways, depending upon the products that are used: basically either the Audio Aux Link/Master Control Link (MCL) system or the Master Link system. The latter is the most recent system, and the long-term objective is that it shall replace the other system.

Introducing Master Link

Master Link perceived as an interconnection method offers some convenient benefits not available with the MCL system. An example is that whereas the interconnection in the main room previously had to be carried out with one type of cable (Audio Aux Link) and the interconnection between the main room and the link rooms with another type of cable (Master Control Link), the new Master Link connection offers a bustype connection that caters for all interconnections between the main room audio and video systems as well as connections to the link rooms. Another benefit is the completely individual volume control and tone adjustments in each link room, due to the distribution of audio signals at line level and the application of power amplifiers in each link room. Contrary to the previous signal distribution system, Master Link signals are distributed as balanced signals, permitting distribution of CD-quality sound, even when the cable distances are fairly long. Finally, the distribution hardware has been improved, e.g. by the introduction of a reduced signal cable diameter and new cable termination methods. The benefit of this improvement is that installation has become simpler and more elegant. The simplification is most evident in smaller installations, e.g. the installation of an intelligent kitchen loudspeaker being intuitively and quickly accomplished, whereas larger installations still require some planning and installation skills - as implied by the presence of this booklet.

In the Master Link system audio and control signals are distributed by means of one single cable. Only BeoLink compatible products can be fully integrated in a BeoLink system, but previous system products may be integrated to a limited extent, as described in the chapter on Compatibility setups, page 13.

PRODUCT DESCRIPTION

Below you will find a description of the individual elements included with the Master Link products as well as their scope of application.

Content

BeoLab 3500 (LCS 9000) The BeoLab 3500 is an integrated link room speaker consisting of an active speaker with Master Link (ML) connection, an IR receiver and a display. BeoLab 3500 also has Master Control Link (MCL) connection. Furthermore, the BeoLab 3500 has a built-in clock. The BeoLab 3500 is supplied with a mains lead and a bracket for wall mounting.

Application

The BeoLab 3500 is used in link rooms where you wish to have an integrated active speaker. From the BeoLab 3500 it is possible to listen to all audio sources from the main room. BeoLab 3500 has built-in sound control, meaning that tone and volume can be adjusted independently of the main room. With the tone control it is possible to adjust balance, bass, treble and loudness individually. BeoLab 3500 offers the following close-up operation features: - Timer on/off - PLAY / ST.BY

Part no.

1160111 (EU) 1160211 (GB) 1160311 (USA/CDN) 1160411 (JAP) 1160511 (AUS)

Miscellaneous

Besides the parts included with the BeoLab 3500, the installation may require a Master Link cable as well as plugs, sockets,cable covers and junction boxes (see the section on installation types, page 21).
Content BeoLab 2000 The BeoLab 2000 is an integrated link room speaker consisting of an active speaker with Master Link (ML) connection, an IR receiver and an operation panel for close-up operation. The BeoLab 2000 is supplied with a mains lead and brackets for wall mounting or mounting in a corner.
The BeoLab 2000 is used in link rooms where you wish to have an integrated active speaker. From the BeoLab 2000 it is possible to listen to all audio sources from the main room. BeoLab 2000 has built-in sound control, meaning that volume can be adjusted independently of the main room. BeoLab 2000 offers the following close-up operation features: Source selection (TAPE, CD, RADIO) Timer on/off PLAY / ST.BY Step through programs and tracks Volume control
1164129 (EU) 1164229 (GB) 1164329 (USA/CDN) 1164429 (JAP) 1164529 (AUS)

Besides the parts included with the BeoLab 2000, the installation may require a Master Link cable as well as plugs, sockets,cable covers and junction boxes (see the section on installation types, page 21).
BeoLink Active BeoLink Active consists of a control box, an IR receiver, a receiver cable and a mains lead.
BeoLink Active speakers are used in link rooms where active speakers are required. All Bang & Olufsen active speakers may be connected. BeoLink Active has built-in sound control, meaning that tone and volume can be adjusted independently of the main room. With the tone control it is possible to adjust balance, bass, treble and loudness individually. With a BeoLink Active it is possible to listen to the sound from all main room audio products. BeoLink Active offers the following close-up operation features: - Timer on/off - PLAY / ST.BY - Volume up and down

(USA/CDN)

Besides the parts included with the BeoLink Active, the installation requires a Master Link cable as well as plugs, sockets and junction boxes (see the section on installation types, page 21).
Content BeoLink Passive BeoLink Passive consists of an amplifier including a control unit, an IR receiver, a receiver cable and a mains lead.
BeoLink Passive is used in link rooms where passive speakers are required (e.g. CX50/CX100). BeoLink Passive has built-in sound control, meaning that tone and volume can be adjusted independently of the main room. With the tone control it is possible to adjust bass, treble, balance and loudness individually. With a BeoLink Passive it is possible to listen to the sound from all main room audio products. BeoLink Passive offers the following close-up operation features: - Timer on/off - PLAY / ST.BY - Volume up and down
1165566 (AUS) 1165666 (EU) 1165766 (GB) 1165866 (USA/CDN)
Besides the parts included with the BeoLink Passive, the installation requires a Master Link cable as well as plugs, sockets and junction boxes (see the section on installation types, page 21).
BeoLink Converter BeoLink Converter consists of a control box and a mains lead.

Option programming

One of the conditions for the recommended setups to perform optimally is that the products included in the setup know in what kind of environment they are placed. The actual option programming is executed by pressing a certain sequence of keys on the terminal.
For the Beo4 terminal the key sequence is the following: Press and hold then Press to access the setup function. The Beo4 display reads [OPTION?] - let go of both buttons Press to access Option-programming Press to display [V.OPT] AV 7000/MX 5500, or [A.OPT] Beomaster/BeoSound, or [L.OPT] link room products then Key in the number of the appropriate Option, e.g. 1
For the Beolink 1000 terminal the key sequence is the following: AV 7000 or MX 5500: Beomaster/BeoSound: Link room products: digit digit digit
The digit sequence to be used depends on the setup. No IR reception Two IR-eyes in the same main room One IR-eye in the main room Link room product connected to one or two main room products, all in the same room (see page 18 and 19) Option 5 = Two IR-eyes in the same link room Option 6 = One IR-eye in the link room It applies to most setups that they are delivered with the correct option setting from the factory, and they are thus ready for use. However, since in some situations you may have to work with products that have been installed before, e.g. in connection with a house that has been rebuilt, the correct option is indicated at ALL illustrations, even those which are ready for use from the factory. Option 0 Option 1 Option 2 Option 4 = = = =
NOTE! If the option programming is not executed correctly, a malfunction will occur.
Recommended main room setup
Audio system in one room Option programming BeoSound Factory setting BeoSound : Ready for use : Option 1

Master Link

Option programming BeoSound Factory setting BeoSound
: Ready for use : Option 1
Recommended compatibility setups
Compatibility between new audio systems with Master Link connection and MX 5500 videosystems with Audio Aux Link (datalink) connection.
One room setup 1. Option programming Beovision Factory setting Beovision Option programming BeoSound Factory setting BeoSound
Note! If a Beocord VX is connected to Beovision MX, the Software EEPROM in the BeoLink Converter should be replaced with service software part no. 8342792.
: Ready for use : Option 1 : Ready for use : Option 1

BeoLink Converter

2. Option programming Factory setting

Datalink

AUXT-branch
3. Option programming Beovision Factory setting Beovision Option programming BeoSound Factory setting BeoSound

NOTE! Information as to which Beomasters and Beovisions can be connected to BeoLink Converter, see Bang & Olufsen's Product Configuration Guide.
Two room setup Option programming Beovision Factory setting Beovision Option programming BeoSound Factory setting BeoSound
: Option 2 : Option 1 : Option 2 : Option 1
Recommended setups with A/V 7000 and MX 5500 / MX 5000

One room setup

Power link
Option programming A/V 7000 Factory setting A/V 7000 Option programming BeoSound Factory setting BeoSound
Note: Install new software, part no. 8342505, in MX 5500 / MX 5000. When this software is installed, it is not necessary to option programme the MX TV.
: Ready for use : Option 2 : Option 0 : Option 1

A/V 7000

Power link Power link
Only audio sources can be distributed to the link room via Master Link.

Two room setup

Master Link Master Link
: Ready for use : Option 2 : Option 2 : Option 1

V-AUX A-AUX

A/V 7000 Power link Power link Power link Power link Power link
Recommended setups with A/V 7000 and a non-Bang & Olufsen video sources:

IR OUTPUT

VIDEO IN TV

VIDEO OUT TV

Power link BeoLink Converter
Only audio sources can be distributed to the link room via Master Link. The A/V 7000 can be connected to e.g. a non-Bang & Olufsen CDV and video recorder. Information as to which products can be connected to the A/V 7000, see the A/V 7000 -2 Setting-Up guide.
Power link Power link Power link Power link
This product is used where the customer wishes to maintain his current MCL system and to replace the audio system in the main room with a Master Link driver. The ML/MCL Converter can be connected to all recommended MCL link room setups, see the Master Control Link Handbook.
Setups with ML / MCL Converter
1. Option programming BeoSound Factory setting BeoSound
2. Option programming BeoVision Factory setting BeoVision Option programming BeoSound Factory setting BeoSound
3. Option programming BeoSound Factory setting BeoSound
NOTE: It is possible to combine both a ML system and a MCL system in the same installation.
Recommended link room setups
BeoLab 3500 Option programming Factory setting : Ready for use : Option 6
BeoLab 2000 Option programming Factory setting : Ready for use : Option 6

BeoLink Passive Option programming Factory setting : Ready for use : Option 6
BeoLink Active Option programming Factory setting : Ready for use : Option 6
BeoSound Ouverture Option programming BeoSound Factory setting BeoSound : Option 6 : Option 1
Further to the recommended setups, there are two additional combinations. The reason why they are not mentioned under recommended setups is that they do not fully live up to Bang & Olufsens own standards as regards operating simplicity. They have been included anyway, because in some situations they might be appropriate, and they will always permit operation of the basic functions such as source selection (radio, CD, a.tape, etc.), source control (fast forward and rewind, step, selection of a certain track, etc.) and volume control.

Special setups

Link room products or link room kits in the main room.
If an additional listening area is required in the main room, e.g. if it is an L-shaped room, it is possible to operate it without activating the listening area by the AV system (the speakers connected to the centrally placed audio system), it is possible to install link room products and link room kits in the main room.
Option programming link room product Audio/video system
: Option 4 : See main room setups
Note: - The Audio system is operated in the ordinary way. - The extra listening area will only understand information from the terminal if the LINK key is actuated prior to a source selection (CD, radio, a.tape, etc.).
Moreover, option 4 can be used if the link room and the main room are located in such a way that both rooms will be operated simultaneously. By setting the link room to option 4, the room can be operated independently of the main room, because the link room will only accept information from the terminal if the LINK key has been actuated.
All link room products and link room kits with Master Link connection, can be incorporated into this special setup.
NOTE! The BeoLab 3500 S/W version must be 1.1 or higher

DIMENSIONING

Master Link cable

Max. 1320 ft. ML Cable

It is possible to interconnect 16 Master Link products, including the main room products, in one system, and a maximum of 1320 ft. of Master Link cable may be used.
Receiver cable A standard receiver cable of 16 ft. is included with BeoLink Active and BeoLink Passive from the factory.

TIMER PLAY

With standard receiver cable max. 16 ft.
With special low capacity cable max. 49 ft.
If more than 16 ft. is needed from the IR receiver to the BeoLink control box a special low capacity cable must be used (part no. 6270682). With the low capacity cable the distance between the IR receiver and the BeoLink box must not exceed 49 ft. If more than 49 ft. is used, a malfunction may occur.

INSTALLATION TYPES

The following section gives a brief introduction to two typical installation types, namely the visible and the invisible installation. The examples include various applications of Bang & Olufsens installation accessories, which are shown at the end of the handbook. The illustrations give only a few installation examples. There are many alternatives, of course.

Visible installation

A visible installation is used where it is not possible to hide cable and installation materials in the attic and/or in conduits in the wall. In this example the following has been used: 1. 2. 3. 4. 5. 6. 7. 8. 4 x Master Link cable with one plug Master Link cable without plugs 2 x Master Link junction box (included with ML cable with one plug) 1 x BeoLink Active 1 x BeoLink Passive 4 x Power Link cable 2 x Speaker cable 2 x IR receiver cable (16 ft. standard cable included with BeoLink Active and Passive)

Invisible installation

This type of installation makes it possible to hide the cables and installation materials in the wall and/or in the attic. In this example the following has been used: 1. 2. 3. 4. 5. 6. 7. 8. 9. 4 x Master Link cable with two plugs Master Link cable without plugs 4 x Master Link wall socket 2 x Master Link junction box (included with ML cable with two plugs) 1 x BeoLink Active 1 x BeoLink Passive 4 x Power Link cable 2 x Speaker cable 2 x IR receiver cable (16 ft. standard cable included with BeoLink Active and Passive)
Another type of invisible installation is shown below. This installation can be made for example in apartments with no access to the attic or basement.
In this example the following has been used: 1. 2. 3. 4. 5. 6. 7. 8. 4 x Master Link cable with two plugs Master Link cable without plugs 4 x Master Link wall socket 1 x BeoLink Active 1 x BeoLink Passive 4 x Power Link cable 2 x Speaker cable 2 x IR receiver cable (16 ft. standard cable included with BeoLink Active and Passive)
Build-in kit for IR-eye The build-in kit for IR-eye is used for invisible installations. There are two different build-in kits.
One for solid walls (part no. 3375187), which contains a fixture box, a spacer piece, a plastic cover (to close the box under construction) and an ornamental ring.

The other kit is for light partition walls (part no. 3375188) and contains two brackets and an ornamental ring.

INSTALLATION TIPS

Placing of receiver The receiver must be placed so that nothing prevents it from receiving the signals from a Bang & Olufsen remote control. When deciding on the position of the receiver, remember that it should not be possible to activate more than one receiver at a time using a remote control terminal.
The diagram shows that receiver 3 is placed appropriately, whereas receiver 1 can be activated from room 2. Receiver 1 should be placed as receiver 2 instead. The receiver should not be placed in direct sunlight or direct artificial light ( e.g. spotlight) or near objects producing electric noise (e.g. dimmers) as this reduces the sensitivity of the receiver (shorter range). If the receiver is placed outdoors, please note that it does not function at temperatures above 131F or below 32F. If higher or lower temperatures may occur, it should be possible to switch it off by means of a switch. Otherwise it can block the operation of the whole system. It might be a good idea to place the receiver next to a door so that it is easy for the person entering or leaving the room to operate it. It might also be an advantage to place the receiver close to the telephone so that the speakers can easily be muted by the person talking on the phone.

Placing of control box

The control box need not be placed in the same room as the receiver, but may be placed in the attic, for example. Please, note that temperatures may not be above 131F or below 32F.
Use of Master Link junction box:
1. Length-adjustment of cable, e.g. from 33 ft. to 28 ft.
2. Colour-change of cable. For aesthetical reasons all ML cables with plugs are available in the colour black only. When making visible installations it may be necessary to use a grey cable which can easily be connected via the junction box.
3. Connections between products. Max. 4 ML cables in one junction box.

TECHNICAL DESCRIPTION

The following section contains a brief description of the cabling most often used in connection with a BeoLink installation. Regarding part nos., see 'Accessories', page 35.
Pin no. in the Master Link socket 3 4-16 Screen

Cable colour

Function
white/green (WH/GN) green (GN) white/blue (WH/BL)
blue (BL) pink (PI) white/orange (WH/OR) orange (OR) white/red (WH/RD) red (RD) 3 x solid wire
data data + ML-sensing (for future use) N.C. - supply voltage + supply voltage -L +L -R +R Ground
Power Link cable with wire for display data.
pin 1 pin 2 pin 3 pin 4 pin 5 pin 6 pin 7 pin 8

= = = = = = = =

grey = shield = brown = yellow = green = white = shield = pink =
power up/down ground signal, left channel loudspeaker relay signal, right channel Datalink ground overload

Power Link cable without wire for display data

pin 2 pin 3 pin 4 pin 5

= = = =
shield = brown = yellow = green =
ground signal, left channel loudspeaker on signal, right channel

AV-SCART cable:

pin 1 = pin 2 = pin 3 = pin 4 = pin 5 = pin 6 = pin 7 = pin 8 = pin 9 = pin 10 = pin 11 = pin 12 = pin 13 = pin 14 = pin 15 = pin 16 = pin 17 = pin 18 = pin 19 = pin 20 = pin 21 =
audio out, right channel audio in, right channel audio out, left channel audio ground blue ground audio in, left channel blue signal (C out) 12 V sense and Datalink green ground data 2 green signal data 1 red ground fast blanking, ground red signal (C in) fast blanking video out, ground video in, ground video out, signal (Y out) video in, signal (Y in) shield, ground

Datalink cable

pin 1 pin 2 pin 3 pin 4 pin 5 pin 6 pin 7
= yellow = shield = blue = red = green = black = white
= output, left channel = signal ground = input, left channel = output, right channel = input, right channel = data ground = datalink

Receiver cable

= = = = =
Yellow Grey Green White Brown
NOTE! Disconnect your entire Bang & Olufsen system from AC power while you make the connections! NOTE! If more than 16 ft. is needed, use special IR receiver cable with low capacity (part no. 6270668). With special IR receiver cable max. lenght is 49 ft.

TROUBLESHOOTING GUIDE

Master Link products, e.g. BeoLab 3500
When carrying out troubleshooting on a Master Link installation, the first thing to do is to apply the method of exclusion. First disconnect the main room and the link room, one at a time, to ascertain whether the fault is in the main room or in the link room. Then disconnect the individual products, one at a time, until the faulty product or the faulty connection has been found. Simple measurements on the Master Link can be made by means of a voltmeter or an oscilloscope. All listed specifications are measured to ground. The following specifications apply to Master Link: Pin no. in the Master Link socket - Cable colour Function Specification
white/green green white/blue no connection blue pink white/orange
data data+ ML-sensing (N.C.) - supply voltage +supply voltage audio -L
-0.25 V 0.1 V +0.25 V 0.1 V for future use -7 V to -15V in standby -3V to -15V +7 V to +15 V in standby +3V to +15V 1 V Bal Rin 2.2 Mohm, Rout 75 ohm 1 V Bal Rin 2.2 Mohm, Rout 75 ohm 1 V Bal Rin 2.2 Mohm, Rout 75 ohm 1 V Bal Rin 2.2 Mohm, Rout 75 ohm 3 x solid wire

orange

audio +L

white/red

audio -R

audio +R

Screen

Ground

The data speed is 19,200 bits/sec. By way of comparison, the data speed for the Master Control Link is 160 bits/sec.
Possible cause The product is connected to the mains and the stand-by diode is on. If the above is OK, do as follows: Meter data+ (pin 2) relative to ground Meter data- (pin 1) relative to ground Where no transmission, +/- 200 to 300 mV should be measured. When data is being transmitted, 0V should be measured.
Trouble No sound and no operation
Measurement with oscilloscope.

No transmission

+ 0.-0.25

Transmission

If data- and data+ are not measured at No transmission and cannot transmit, the fault may be in the main rooms BeoSound, since it is one of these two units that supplies this voltage. Please note that in setups with a BeoLink Converter it is always the Master Link driver that supplies the voltage. If there are two Master Link drivers, one of them will, when connected, configure itself as being the one that supplies the data voltage. The fault is found by applying the method of exclusion. If the fault is not in one of the Master Link drivers, there is another product that pulls data low or high respectively. Alternatively there could be a cable fault or a connection fault. Data errors can also be displayed in service mode; see the section on service mode. If data is OK, proceed with the measurement of the supply voltage which should be as stated under the specifications. If the voltage is not OK, apply the method of exclusion until the faulty product or the faulty connection has been found.
No sound but operation OK
The data and supply voltages are in this case OK. Measure the signal levels at pins 13 to 16 in relation to the stated specifications. If the signal levels are OK, the fault is in the link room product, perhaps in the converter box, or it may be a faulty cable or connection.

Play only at half volume

One of the balanced audio signals has dropped out.
Service mode Products with a display have a service mode in which Master Link faults can be displayed. Please note that the error reading indicates that the fault is a system fault, which does not mean that the fault is in the particular product that is displaying it. BeoLab 3500 and BeoSound are examples of products providing the service mode feature. Check the service manual for the individual products to see how these procedures are accessed. This example of service mode is from BeoLab 3500. ERROR 1: Address configuration is impossible.

Error during address configuration. No address has been allocated because too many units are connected to the Master Link. - Remove all products from Master Link, and connect them again one at a time until the error code occurs. Disconnect that product from Master Link. ERROR 2: Master Link data pulled low
It is not possible to transmit on Master Link, because it has been pulled low. The error may occur if there is no Master Link driver circuit, or as a result of a physical short-circuit on Master Link or in the data transceiver circuits. - Disconnect one product from Master Link at a time, and see if it starts up. - Reset the faulty product by shortly disconnecting the mains, and check the connection (cable/plug) and signal path (the data transceiver circuit). See repair tips for the data transceiver circuit. ERROR 3: Master Link data pulled high.
It is not possible to transmit on Master Link, because it has been pulled high. This error is caused either by the pull-up resistance in the system having become too small or by an error in the data transceiver circuit. - Disconnect one product from Master Link at a time, and see if it starts up. - Reset the faulty product by shortly disconnecting the mains, check whether the Master Link cable is too long, and check the signal path (the data transceiver circuit). See repair tips for the Master Link data transceiver circuit in the service manual. ERROR 4: Data collision on Master Link
The data traffic on Master Link has been excessive, or a product has jammed and will not receive data telegrams. - Press the operating sequence again. - Disconnect one product from Master Link at a time to determine which product has jammed. Reset the faulty product by shortly disconnecting the mains, and check the Master Link connection (cable/plug) and signal path (amplifiers in the data transceiver circuit).
See the service manual for the individual products for further information.

GLOSSARY

Audio Aux Link Perhaps better known as AV connection. Connection between the audio and video systems. The connection is established through a 7-pin datalink cable.

AV-SCART cable

Standard connection between a TV set and a video tape recorder. The cable is specified for transferring RGB signals.

AV system

Audio/video system. Integration of audio and video, permitting sound to be transferred from one system to the other.

BeoLink

The brand name and a general term describing Bang & Olufsens way of distributing sound and picture. BeoLink may be obtained in different ways depending on the products used: either the Audio Aux Link/Master Control Link (MCL) system or the Master Link system.

Beomaster

Designation of audio masters, e.g. Beomaster 7000 and Beocenter 9500. In future this designation will be replaced by BeoSound.

BeoSound

Common designation of audio products, e.g. BeoSound 4000.

Beovision

Common designation of TV sets, e.g. Beovision MX 5500.

Compatibility

The ability to interconnect products from different generations.

Control box

A box that controls data and signals, for example in BeoLink Active.
7-pin datalink cable used for Audio Aux Link connection between audio and video systems.

Link room

Designation of the other room/rooms in the home in which sound is installed.

Link room kits

Kits specially designed for link rooms, e.g. BeoLink Active and BeoLink Passive.

Link room products

Products specially designed for link rooms, e.g. BeoLab 2000.

Main room

Designation of the room in which the audio and/or video systems are placed. There are two kinds of main rooms ONE-room = audio and video systems placed in the same room TWO-room = audio and video systems placed in separate rooms.

Main room products

BeoSound products which serve as ML driver in a BeoLink system.
Master Control Link (MCL)
Master Control Link is the name of the former connection between main room and link room. Also known as X-Tra and LCS.

Master Link (ML)

Bang & Olufsens new systems interface. Master Link is the connection between the products in the main room and those in the link room.

Master Link driver

BeoSound with Master Link socket. This product is always required in a Master Link setup.

Master Link product

All products with a Master Link socket.

One-way remote control

A remote control terminal that operates the products by transmitting a command to them without requiring an answer (e.g. BL 1000 and Beo4). BL 5000 and BL 7000 are two-way remote control terminals which require an answer from the product being operated.

MUSIC SYSTEMS

All features and data refer to specific type numbers. Other variants are available. Subject to change without notice.

BeoSound 4

BeoSound 9000
BeoSound 4 BeoSound 4 introduces new opportunities for enjoying music. In addition to CD, FM, and the optional DAB radio, it also includes a built-in memory card function that makes it possible to record music directly from BeoSound 4, or to transfer and listen to digital files from your computer.
The memory card technology is well known from the world of computers, but with BeoSound 4 we utilise it to by-pass the PC and make it easier to digitalise your music. It plays the same role that the cassette tape once did. Once you fill your memory card with music, you can also enjoy it on our BeoSound 3 and BeoSound 2, or other standard MP3 music players. BeoSound 4 is the perfect audio system in a BeoLink setup, and can be enhanced via BeoPort to include access to Internet radio.
DESIGNER DIMENSIONS / WEIGHT CABINET FINISH REMOTE CONTROL POWER CONSUMPTION RADIO: SYSTEMS COMPACT DISC: DISC SIZES FREQUENCY RANGE SIGNAL-TO-NOISE RATIO FEATURES CD MEMORY: SUPPORTING FREQUENCY RANGE SIGNAL-TO-NOISE RATIO AUDIO PROCESSING FEATURES CONNECTIONS: ACCESSORIES:
David Lewis 28 x 31 x 24 cm / 4 kg (lid closed) 28 x 39 x 27 cm / 4 kg (lid open) Black Beo4 recommended Typical 25 W, standby 1 W 99 radio presets with naming FM (with RDS) and DAB (optional) 12 cm, 8 cm 20 20,000 Hz, 1 dB Typical 103 dB, A weighted Naming (200 titles), random, repeat Built-in MMC/SD Card reader MP3, WMA 20 15,000 Hz, 1 dB Typical 97 dB, A weighted Compressed audio encoding Naming, random, repeat Power Link, Audio AUX in / out, FM aerial, DAB aerial (optional), Master Link, Headphone Wall bracket, aluminium Floor stand, aluminium
David Lewis 90 x 7 x 30 cm / 11.5 kg
Reach out towards BeoSound 4s operation panel and the glass door moves gently up to reveal the buttons and wheels of the operation panel. Select CD and watch as the glass door continues upwards and the CD clamper rises up. The full-graphic display allows for running text and combines with the wheels and buttons on the panel to ensure simple but effective control of all your extended musical options. BeoSound 4 is a sculptural design solution thats appealing from any angle. Its gentle incline enables you to easily interact with the display from above. And is an open invitation for you to come close, to touch and to operate. BeoSound 4 has a presence wherever you place it - on a table, the wall or on a floor stand. Making your music more accessible, movable and enjoyable. BeoSound 9000 BeoSound 9000 is pure poetry in motion. The transparent design lets you watch as the CD mechanism moves quietly and quickly from one disc to another in a graceful example of movement and mechanics. The extraordinary engineering enables up to 12 hours of music, with the ability to memorise up to 200 CD titles, displaying them as they are played. It can also be programmed to skip the tracks you dont want to hear and will stop in exactly the same position as when you loaded the CD. Also included is an intelligent FM radio, capable of storing up to 60 stations identified by name. Digital music files and Internet radio can be accessed directly from your computer by combining BeoSound 9000 with the latest BeoPort software. BeoSound 9000 can be used as a BeoLink master distributing its audio sources to any loudspeaker or TV in your BeoLink system. BeoSound 9000 can be placed vertically, horizontally, upright or lying down, on the wall or on a stand. The text display changes automatically to match your choice, plus the control panel works like a movable cartridge, so you can always read the text and enjoy the amazing sound as you see it played.
Black / aluminium Beo4 recommended Typical 12 W, standby 1.2 W 60 radio presets with naming FM (with RDS) and AM 6 discs 12 cm, 8 cm (in adaptor) 6 discs 20 20,000 Hz, 1 dB Typical 101 dB, A weighted Naming (200 titles), random, repeat, edit

OPTIONAL

Net Music/Radio is optional via BeoPort

David Lewis 51 x 34 x 16 cm / 6.5 kg Black, silver, dark grey, yellow, violet Beo4 recommended Typical 12 W, standby 0.6 W 59 radio presets FM 12 cm, 8 cm (in adaptor) 20 20,000 Hz 1 dB Typical 100 dB, A weighted Edit, Wake-up Timer Built-in, closed box 5 units, Class AB 55 20,000 Hz Audio AUX in / out, FM aerial, headphone Wall bracket, black Floor stand, aluminium Replaceable front cover: silver, black, dark grey, violet, yellow
FM: 62 dB (A); SD: 76 dB (A) Wake-up timer, SD/MMC-card playback (MP3, WMA) Built-in, closed box 1 unit, Class AB 60 20.000 Hz Battery charge, SD card, headphone (stereo) Wall bracket, black (included)

BeoSound 2

BeoSound 2 With its round form and polished stainless steel finish, BeoSound 2 is a portable digital music player that looks as good as it performs. Its so simple and intuitive to use, theres no need for a display. The absence of any moving parts means no matter how active you are, there wont be any vibrations to come between you and your musical enjoyment. Music can be recorded onto the memory card directly from BeoSound 4 or directly from your computer. A specially designed docking station provides the connection to the computer and, at the same time, acts as a convenient power charger. Re-charging the battery is a simple matter of clicking BeoSound 2 onto the docking station. A fully charged battery allows up to 10 hours of uninterrupted music either playing your pre-defined music lists or in Random mode. BeoSound 2 is compatible with both PC and Mac, and you are free to choose from different sized memory cards including one with two gigabyte enough space for literally hundreds of songs. To optimise the portability of BeoSound 2, weve added some extra carrying options. A leather case, available in red or brown, offers the same quality and craftsmanship as the product itself. A unique carrying case has also been developed by Louis Vuitton, which can be found in their stores throughout the world. Theres also the option of an adjustable water-resistant neoprene armband for use with sporting activities. And when travelling, theres a special travel charger accessory. BeoSound 2 comes with a neck strap as standard. Whether its in the palm of your hand, your pocket, or together with a leather carrying case, BeoSound 2 brings a touch of sophistication to portable sound.

Earphones

DESIGNER DIMENSIONS / WEIGHT CABINET FINISH FLASH MEMORY CARD SUPPORTED AUDIO FORMATS BATTERY CHARGING TIME FUTURE SOFTWARE UPGRADES COMPATIBILITY DOCKING STATION: DIMENSIONS / WEIGHT EXTERNAL MAINS ADAPTOR: MAINS VOLTAGE POWER CONSUMPTION CONNECTIONS: ACCESSORIES: OPTIONAL:
David Lewis Diameter 73 mm, thickness 23 mm / 90 g Polished stainless steel Exchangeable MMC/SD MP3, WMA Built-in, rechargeable, approx. 8-10 hours playing time Max. 2.5 hours Can be uploaded via PC PC and Apple Macintosh Diameter 72 mm, height 30 mm / 150 g

DESIGNER DIMENSIONS WEIGHT (ONE EARPHONE) WEIGHT (COMPLETE SET) FINISH CORD PLUG PRINCIPLE FREQUENCY RANGE IMPEDANCE
Anders Hermansen 35 x 59 x 14 mm 8g 22 g Aluminium 1.2 m Mini jack Electro-dynamic speaker In-ear type (intra concha earphone) 50 20,000 Hz 19 ohms
Earphones Bang & Olufsens Earphones provide incomparable sound and comfort without compromise. With other earphones, much of the sound never makes it into the ear. Our Earphones are specially developed to closely match the contours and curves of the individual ear so you hear the sounds that would otherwise slip away. Carefully constructed out of rubber and aluminium, each element can be manoeuvred up or down, or from side to side to ensure the perfect fit. On the inside are many of the same acoustic competences found in our larger loudspeakers, just miniaturised.
V AC Typical 5 W / standby 0.2 W Earphones, USB (via docking station), mains adaptor (via docking station) Bang & Olufsen Earhones included Travel Charger, Leather Case red or dark brown, case for sports use

LOUDSPEAKERS

BeoLab 5

BeoLab 8000

BeoLab 5 BeoLab 5 is a speaker that listens just as much as it performs. It utilises a unique, patented Acoustic Lens Technology to create a sound thats equally dispersed horizontally throughout the room while avoiding acoustic reflections from the floor and ceiling. Furthermore, it has another unique patented digital calibration device called Adaptive Bass Control that reads the acoustics of a room and calibrates the sound accordingly. Wherever you decide to place BeoLab 5, simply press the button on top and a tiny microphone emerges from the bottom. It sends a tone that measures the size of your room and the placement of the furniture etc. All it takes is two minutes for this complex calculation. The result? Exactly the same sound performance regardless of the speakers position in the room or the acoustic character of the room itself.
DESIGNER DIMENSIONS / WEIGHT CABINET FINISH
David Lewis 49 x 98 cm / 61 kg Aluminium / black cloth
POWER CONSUMPTION POWER AMPLIFIER, LOWER BASS POWER AMPLIFIER, UPPER BASS POWER AMPLIFIER, MID-RANGE POWER AMPLIFIER, TREBLE POWER AMPLIFIERS LONG-TERM MAXIMUM OUTPUT POWER PER MODULE EFFECTIVE FREQUENCY RANGE CABINET PRINCIPLE MAGNETIC LEAKAGE WOOFER MIDRANGE TWEETER ROOM ADAPTION DIRECTIVITY CONTROL TREBLE AND MIDRANGE CABINET VOLUME BASS EQUALISER SWITCH OFF TIME (LINE) VOLUME ADJUSTMENT CONNECTIONS:

Typical 40 W, standby < 2 W 1.000 watts, Class D, ICEpower 1.000 watts, Class D, ICEpower 250 watts, Class D, ICEpower 250 watts, Class D, ICEpower
David Lewis 17 x 132 x 17 cm / 20 kg / / / / / Cabinet/cloth finish: black/black, aluminium/black, dark grey/dark grey, red/black, blue/black Typical 12 W, standby 2.5 W
Used as part of a home cinema set up, youll appreciate BeoLab 5s superb surround sound capabilities. The absence of distortion even at high volume levels creates a smooth sound with exceptional realism. A sonic experience so close to the original recording that the walls seem to simply disappear. With 2500 watts of power in each loudspeaker, it can deliver a sound performance that is comparable to any sound you can hear in a cinema. BeoLab 8000 BeoLab 8000 stands poised on its cast-iron base as an aesthetic exclamation mark. Making a solid statement about Bang & Olufsens advanced acoustic technology and careful craftsmanship, it challenges assumptions by delivering maximum sound from minimal space. A patented protection circuit (Adaptive Bass Linearisation) allows the loudspeaker to play deep bass at normal listening levels and even louder, if desired. Since BeoLab 8000 is magnetically sealed, it is free from the effects of other electrical equipment, and can stand extremely close to a TV without any adverse effects on the picture. Wherever you choose to place it, all you will see is its striking silhouette, because both power cables and connections are enclosed into a single rubber profile. The high polished surface absorbs and reflects its surroundings, and is now available in a range of bold colours, which makes BeoLab 8000 a perfect punctuation to any interior.
2 units, Class AB 143 W 20 20,000 Hz Sealed box Lower 381 mm 15" / Upper 165 mm 6,5" 76 mm 3" 19 mm 3/4" ABC (Adaptive Bass Control) ALT (Acoustic Lens Technology), licensed from Sausalito Audio* Upper bass: 5 litres, lower bass: 29 litres 52 20,000 Hz Bass Reflex Shielded 2 x 10 cm 4" 1.8 cm 3/4"
5.3 litres Adaptive Bass Linearisation (ABL) 3 min. Power Link (one) Phono (line)
Built-in, via Beo4 Power Link (two) Phono (line) Digital IEC 60958 (two) (32 / 44.1 / 48 / 88.2 kHz)

POWER CONSUMPTION POWER AMPLIFIERS LONG-TERM MAXIMUM OUTPUT POWER PER MODULE EFFECTIVE FREQUENCY RANGE CABINET PRINCIPLE MAGNETIC LEAKAGE WOOFER TWEETER PASSIVE RADIATORS CABINET VOLUME BASS EQUALISER LOUDSPEAKER POSITION ADJUSTMENT INPUT SENSITIVITY (POWER LINK) SWITCH OFF TIME (LINE) CONNECTIONS: ACCESSORIES:
David Lewis 28 x 32 x 13 cm / 6 kg / / / / / / Cabinet/cloth finish: black/black, silver/silver, dark grey/dark grey, yellow/yellow, red/black, blue/black Typical 10 W, standby 0.5 W 2 units, Class AB 59 W 55 20,000 Hz Bass Reflex Shielded 11 cm 4 1/2" 1.8 cm 3/4" 4 litres Adaptive Bass Linearisation (ABL)
David Lewis 26 x 32 x 31 cm / 18 kg Aluminium; structure painted grey Typical: 15 W, standby 0.4 W 1 unit, Class D 850 W Hz (upper limit determined by setup) Double balanced passive radiator system Shielded 1 x 9" (229 mm) flat diaphragm 2 x 9" (229 mm) flat diaphragm 13 litres Adaptive Bass Linearisation (ABL) Manual: free, wall or corner Adjustable by three-position switch Power Link input (one) Power Link output (two)
3 min. Power Link (two) Phono (line) Base, black Floor speaker stand, aluminium Front cover: Gray, black, blue, green, red, yellow

BeoLab 1

BeoLab 6000
BeoLab 1 Impressive as a sculpture and for its incredible sound, BeoLab 1 is a pillar of strength. A range of sophisticated sound technologies, including the first use of ICEpower amplification, are just some of the reasons behind its ability to make nuances in sound much more noticeable. Its construction from a single piece of aluminium means dissonance caused by seams or corners is eliminated. The cabinet is divided into three individually-sealed units using vibrationdampening materials normally only seen in the car industry. This, together with BeoLab 1s performance power, accounts for a clear and pure sound at any level. Its a loudspeaker people look up to, in more ways than one. BeoLab 6000 Theres nothing loud about the way this loudspeaker looks. Thats because BeoLab 6000 was created to be perceived as a thin line. At 110 cm tall and only 10 cm in diameter, its an inconspicuous column that can easily assimilate into any surrounding. Since no two loudspeaker units have precisely the same physical characteristics, we individually calibrate them to be certain that each BeoLab 6000 that leaves the factory is identical. For optimal sound each time you listen to them, they continuously fine-tune the signal received from the sound source, before distributing it out to the separate bass and treble power amplifiers. With BeoLab 6000, the amplifiers are placed directly into the speaker. This active technology improves the performance and allows the purest of sounds with the simplest of shapes. As a pair, BeoLab 6000 is perfect for a music system, as extra television loudspeakers or as rear speakers in a surround sound set-up. With a full selection of colours to choose from, BeoLab 6000 is a look thats easy to live with.

DESIGNER DIMENSIONS W x H x D / WEIGHT CABINET FINISH
David Lewis 100 x 11 x 21 cm / 10 kg Black aluminium cabinet/Front grill: black/silver/dark grey/red/blue Typical 20 W, standby 0.2 W 6 X 125 watts, Class D, ICEpower 120 W / 8 ohm per module 37 20,000 Hz Bass: Bass Reflex Midrange/Treble: Closed box
David Lewis 124 x 11 x 21 cm / 11 kg Black aluminium cabinet/Front grill: black/silver/dark grey/red/blue Typical 20 W, standby 0.3 W 6 X 125 watts, Class D, ICEpower 120 W / 8 ohm per module 37 20,000 Hz Bass: Bass Reflex Midrange/Treble: Closed box
David Lewis 17 x 48 x 19 cm / 8 kg Black aluminium cabinet/Front grill: black/silver/dark grey/red/blue Typical 12 W, standby 0.3 W 2 x 250 watts, Class D, ICEpower Bass/Midrange: 180 watts / 8 ohm Treble: 180 watts / 8 ohm 50 20,000 Hz Closed box ALT (Acoustic Lens Technology), licensed from Sausalito Audio Works LLC. Not shielded 12,5 cm 5" 1.9 cm 3/4" Free or Wall position 5 litres Adaptive Bass Linearisation (ABL) Power Link (one) Mains (one input, one output)
POWER CONSUMPTION POWER AMPLIFIERS LONG-TERM MAXIMUM OUTPUT POWER PER MODULE EFFECTIVE FREQUENCY RANGE CABINET PRINCIPLE DIRECTIVITY CONTROL TREBLE MAGNETIC LEAKAGE WOOFER MIDRANGE TWEETER ROOM ADAPTION CABINET VOLUME BASS EQUALISER CONNECTIONS:
Not shielded 10.2 cm 4" 7.6 cm 3" 1.9 cm 3/4" Free or Wall position Bass: 4.2 litres Midrange: 0.8 litres per side Adaptive Bass Linearisation (ABL) Power Link (one) Mains (one input, one output)
Not shielded 10.2 cm 4" 7.6 cm 3" 1.9 cm 3/4" Free or Wall position Bass: 5.2 litres Midrange: 0.8 litres per side Adaptive Bass Linearisation (ABL) Power Link (one) Mains (one input, one output)

TELEVISIONS

BeoVision 7 32
BeoVision 7 BeoVision 7 is more than just a TV. Its a complete entertainment system specially created to give you a sound and picture experience that will exceed your expectations.
We do away with the notion that a flat screen also means a flat sound, and combine the best of both worlds to create one unique solution. With a choice of 32" or 40" LCD screens and a selection of loudspeaker options, BeoVision 7 offers you all the benefits of flat-screen viewing, together with the best sound performance possible. Within its slender cabinet we also integrate a complete DVD player. Its holder swings gracefully out from under the screen to accept your disc, and a small prismatic light places a spotlight on the entertainment of your choice. The razor-sharp picture is a result of a combination of the top-of-the-range LCD technology and Bang & Olufsens own VisionClear technologies, enabling the best picture possible in any viewing situation. BeoVision 7 comes in five colours and with numerous placement possibilities. Whether on its fixed low stand or on a motorised floor or table stand, you have the option of a manual or automatic tilt function. You can also choose to make BeoVision 7 the video centre in your BeoLink system and enjoy access to all it offers all over your home. Add BeoMedia 1, and you will also have access to a range of digital sources including photo, video clips, Internet radio and digitalised music.

David Lewis 125 x 77 x 10 cm + stand / 51 kg Black. Frame is available in 5 different colours: black, silver, dark grey, blue and red 1,049,088 pixels (1366 x 768 x R, G, B) 3000:Beo4 Typical: 320 W, standby: 0.6 W 16:9, 50" / 127 cm plasma display panel Yes, anti-reflection coating Level 2 1/2, 1780 pages, Wide-screen Signalling (WSS), Fastext (FLOF), 4 memory pages per programme, National character-set Temperature F, C, Humidity 20% 80%. Minimum outside air pressure: 760 hPa 99 programmes, autotune, programme move and automatic naming A2 + Nicam English Built-in 3 x coax phono Built-in (controlling up to two STBs) 2 x front, 2 x rear, 1 x centre, 1 x subwoofer speakers Aerial 1 x 75 ohm 3 x 21-pin for AV, decoder and V.tape (AV incl. S-video in/out, AV and V.tape incl. RGB), HD input DVI incl HDCP VGA/YPbPr 3 x phono sockets (video in/audio L-R in) Y-C 4-pin socket Mini jack ML socket 1 x 75 ohm aerial male, RF out, system modulator according to type: I or G Mini jack Wall bracket, Table stand, Cabinet for BeoSystem 2 (silver, black, red, blue and dark grey)
David Lewis 160 x 97 x 11 cm + stand / 100 kg Black. Frame is available in 5 different colours: black, silver, dark grey, blue and red 1,049,088 pixels (1366 x 768 x R, G, B) 3000:Beo4 Typical: 470 W, standby: 0.6 W 16:9, 65" / 165 cm plasma display panel Yes, anti-reflection coating Level 2 1/2, 1780 pages, Wide-screen Signalling (WSS), Fastext (FLOF), 4 memory pages per programme, National character-set Temperature F, C, Humidity 20% 80%. Minimum outside air pressure: 760 hPa 99 programmes, autotune, programme move and automatic naming A2 + Nicam English Built-in 3 x coax phono Built-in (controlling up to two STBs) 2 x front, 2 x rear, 1 x centre, 1 x subwoofer speakers Aerial 1 x 75 ohm 3 x 21-pin for AV, decoder and V.tape (AV incl. S-video in/out, AV and V.tape incl. RGB), HD input DVI incl HDCP VGA/YPbPr 3 x phono sockets (video in/audio L-R in) Y-C 4-pin socket Mini jack ML socket 1 x 75 ohm aerial male, RF out, system modulator according to type: I or G Mini jack Wall bracket, Cabinet for BeoSystem 2 (silver, black, red, blue and dark grey)

BeoVision 6 22

BeoVision 6 26
BeoVision Simply put, BeoVision 6 is one of the most accomplished LCD solutions in the world. Available in a 22" and 26" version, its pure and compact form allows it to be placed almost anywhere. The patented tilt mechanism means that even the lightest touch produces an instant and precise response providing a perfect viewing angle. To ensure that both versions of BeoVision 6 always can be seen, heard and enjoyed, they can hang on the wall, sit on a table, or be placed on a selection of different stands. Their clean lines and compact size make them a versatile TV in terms of placement opportunities and use. BeoVision now comes in five different colours, which ensures easy integration wherever you decide to place it in the home. Make use of the optional surround sound module and you can create a full-blown home cinema system with a selection of BeoLab loudspeakers. BeoVision is the perfect second TV in the kitchen, a natural addition in any BeoLink set-up, and will even function as a graceful PC monitor. The sound panel under the anti-reflection coated screen contains two bass reflector speakers and an ingeniously designed bass port. Which brings an extra depth and dimension of sound to a screen so flat. Both versions of BeoVision 6 make full use of our VisionClear technology to measure the surrounding light and adjust the contrast and balance accordingly. They also include a special anti-reflection coating which enhances the on-screen colours by minimising the reflections from your room.

TUNING LCD: RESOLUTION LUMINANCE OF WHITE (CENTER OF SCREEN) CONTRAST RATIO (CENTER OF SCREEN) RESPONSE TIME VIEWING ANGLE STEREO DECODERS MENU LANGUAGES SET-TOP BOX CONTROLLER (STB-C) LOUDSPEAKERS: CONNECTIONS: INPUT TV VTAPE / AV
CAMCORDER / AUXILIARY HEADPHONES BEOLINK BEOLINK VIDEO DISTRIBUTION POWER LINK SET-TOP BOX CONTROLLER PC INPUT MOTORISED STAND OPERATION SATELLITE (OPTIONAL) DIGITAL SURROUND SOUND MODULE (AC-3/DTS) (OPTIONAL) OPTIONAL EXTRA: STANDS:
System modulator, Master Link module Table stand, Motorised table stand (aluminium), Motorised floor stand (aluminium), Wall bracket

BeoVision 5

BeoVision 5 Framed in aluminium, BeoVision 5 makes an impression as a work of art, even when its turned off. Turn it on and the plasma screen opens its electronic curtains and creates an unrivalled home cinema experience.
BeoVision 5 has incomparable viewing quality with a complete range of Bang & Olufsens VisionClear competences. With the added benefit of an Active Picture Format Optimisation, it will read the transmission signal and adjusts the format to ensure the best possible picture. The magnificent sound comes from the two powerful loudspeaker units housed together directly below the screen. A built-in Dolby Digital and DTS decoder that automatically detects different digital sound modes, adds a final touch to exemplary sound performance. Just add a set of BeoLab loudspeakers, and let yourself be captivated by a powerful multi-channel digital surround sound cinematic experience. BeoVision 5 can be wall-mounted or placed on the floor on its own motorised turning stand. With six colour options to choose from, BeoVision 5 can be easily integrated into your interior dcor. But will always provide a strong statement that you simply cant ignore.
DESIGNER DIMENSIONS / WEIGHT CABINET FINISH COLOUR VARIANTS PIXEL COUNT CONTRAST RATIO VIEWING ANGLE REMOTE CONTROL INCLUDED POWER CONSUMPTION VIDEO TECHNOLOGY PICTURE: CONTRAST SCREEN TELETEXT OPERATION CONDITIONS TV SYSTEM:
David Lewis 107 x 115 x 17 cm / 76 kg Black Soft touch. Frame is available in 5 different colours: black, silver, dark grey, red and blue. Front panel is available in 3 different colours: silver, black and dark grey / / / / / / Silver / silver, silver / black, dark grey / dark grey, red / black, blue / black 786,432 pixels (1024 x 768 x R, G, B) 3000:Beo4 Typical 265 W, standby 1.5 W Motion compensated progressive scan 16:9, 42" / 107 cm plasma display panel Yes, anti-reflection coating Level 2 1/2, 1780 pages, Wide-screen Signalling (WSS), Fastext (FLOF), 4 memory pages per programme, National character-set Temperature F, C, Humidity 20% 80%, Minimum outside air pressure: 760 hPa Type No 8943: I, PAL, SECAM, NTSC on AV Type No 8942: M/I/D/K, PAL, SECAM, NTSC on AV Type No 8945: B/G, PAL, SECAM, NTSC on AV For other TV systems please contact your dealer 99 programmes, autotune, programme move and automatic naming A2 + Nicam English Built-in 3 x coax phono Built-in (controlling up to two STBs) Stereo / centre channel 2 x front, 2 x rear, 1 x subwoofer speakers Aerial 1 x 75 ohm 3 x 21-pin for AV, decoder and V.tape (AV incl. S-video in/out, AV and V.tape incl. RGB), HD input DVI incl HDCP VGA / YPbPr 3 x phono sockets (video in/audio L-R in) Y-C 4-pin socket Mini jack ML socket 1 x 75 ohm aerial male, RF out, system modulator according to type: I or G Mini jack Digital satellite module (DVB-S) Motorised stand, Wall bracket, Floor stand, Cabinet, silver, black, dark grey, blue and red

VIDEO RECORDER

HDR 1 HDR 1 is not only a new concept, its a new way of living with video entertainment. In addition to instant and timer-based recording, HDR 1 also offers simultaneous recording and playback. This allows you to make a new recording while watching an existing one, and also makes it possible to pause a live broadcast and to return to it while it continues to record the programme in real time.

DVD / CD PLAYER

DVD 1 DVD 1 is controlled simply and efficiently by Beo4, and is a DVD player that works seamlessly with any current Bang & Olufsen television. It plays several video formats and allows instant access to any movie sequence. The variety of sound formats ranges from traditional stereo to best cinema quality. If you have a TV in another room in your BeoLink setup, then you can also access DVD 1 in the main room, even if someone is watching TV there. DVD 1 can sit discreetly on a dedicated shelf below the television, or in one of our TV cabinets.
DESIGNER DIMENSIONS / WEIGHT CABINET FINISH REMOTE CONTROL POWER SUPPLY POWER CONSUMPTION RECORD AND PLAYBACK VIDEO HDD STEREO DECODERS MENU LANGUAGES SET-TOP BOX CONTROLLER (STB-C) CONNECTIONS: AV AUX SCART Y/C INPUT AUX INPUT TV TUNER DATA INPUT
David Lewis 38 x 9.7 x 28 cm / 4 kg Black, silver Via BeoVision, Beo4 recommended V / 50 / 60 Hz Typical 21 W, standby < 0.8 W Simultaneous PAL, SECAM colourdecoder. Record NTSC signal at AUX scart 80 Gb, recording capacity 20 hours in high quality 80 Gb, recording capacity 45 hours in standard quality A2 + NICAM English, Danish, Dutch, Spanish, Italian, German, French, Swedish Built-in AV Link 21-pin socket AV Link 21-pin socket Mini DIN, 4-p TV aerial 1 x 75 ohm Minijack
With its simple but effective operation, its easy to create different groups for all your recordings: one for sports, films or as individual groups for family members. All your video recordings will appear on-screen and can be accessed and edited via the Beo4 remote control. Youre free to select the quality of the recording level you desire, and all your recordings can also be accessed directly from another room in your BeoLink set-up.
DESIGNER DIMENSIONS / WEIGHT CABINET FINISH REMOTE CONTROL DISC SIZES PLAYBACK DVD REGION POWER CONSUMPTION CONNECTIONS:
David Lewis 38 x 9.7 x 28 cm / 4 kg Black, silver Via BeoVision, Beo4 recommended 12 cm, 8 cm DVD-Video, Video CD, CD-DA, CD-R, CD-RW, CD-MP3 Multistandard PAL/NTSC According to country Typical 13 W, standby 1 W AV, S-video, video, audio line out, digital audio out (coax)

TELEPHONES

BeoCom 2

BeoCom 6000

BeoCom 4
BeoCom 2 BeoCom 2 is instantly recognisable as an original Bang & Olufsen solution that radically challenges traditional telephone design. Its a cordless phone system that can contain up to six individual BeoCom 2 or BeoCom 6000 handsets from a single telephone socket. Not to mention other numerous functions youll also find convenient, such as Caller ID, Redial functions and an electronic phonebook with room for up to 200 entries. For access to all functions, just use the thumb-track point inserted in the keypad. You can also use BeoCom 2s keypad to control the volume of Bang & Olufsen TVs and music systems. Available in a variety of colours and with its own unique ringing tone, its a telephone that people continue to talk about. BeoCom 6000 BeoCom 6000 offers both intelligent and elegant communication. Up to six handsets can share the same base with the ability to redirect external calls from one handset to another. Internal calls are free, and all the handsets have access to the same built-in electronic phonebook, which stores up to 200 entries. BeoCom 6000 will also remember the details of the last 24 incoming and outgoing calls. This feature, together with Caller ID and the Redial function, makes keeping in touch easy with just the touch of a button. Access to all essential features is at your fingertips, via the intelligent wheel and surrounding buttons. BeoCom 6000 even lets you control the volume of your Bang & Olufsen television, speakers or music systems. The clean lines and innovative design of the BeoCom 6000 charger is only part of its appeal. The software inside makes sure that you never overcharge your battery. The chargers are made of brushed aluminium and are available in both tabletop and wall-mounted versions, and the handsets come in a range of colours, allowing you to match different handsets with different rooms in your home. BeoCom 4 The simple shape of BeoCom 4 is an indicator of its straightforward purpose as a walk and talk cordless phone for the home. Operation is quick and intuitive thanks to the wheel function. Installation is also simple, just plug it in to a telephone socket and its ready for use. Voice recognition is one of BeoCom 4s strong points. It reproduces the callers voice with remarkable clarity and authenticity, thanks to the interaction of a specially designed loudspeaker unit with digital sound processors. For extra hands-free flexibility, EarSet 1 can also be used with BeoCom 4. The cylindrical handset and base come in three colours and in a material thats made to withstand everyday use. All of which gives you freedom of choice, as well as the freedom of movement.

DESIGNER SYSTEM DIMENSIONS BASE WITH HANDSET WEIGHT OF HANDSET COLOURS CAPACITY (STANDBY / TALK TIME) CHARGING TIME RANGE: INDOOR OUTDOOR MEMORY (PHONEBOOK) CALL LIST (CALLER ID AND REDIAL) CALLER ID WITH DATE AND HOUR REDIAL DIALLING OF CALLER ID NUMBER INDICATOR FOR LINE BUSY INDICATOR FOR UNANSWERED CALLS VOLUME CONTROL MICROPHONE MUTE DISPLAY OF CALL DURATION KEYPAD LOCK ALARM FOR LOW BATTERY INTERCOM RINGER SETTINGS AUDIO / VIDEO VOLUME CONTROL LIGHT IN DISPLAY ACTIVATED BY OPERATION FULL GRAPHIC DISPLAY MENU LANGUAGES HEADSET CONNECTION CHARGER: TABLE CHARGER WALL CHARGER COLOURS SYSTEM BASE STATION: BEOLINE PSTN BEOLINE ISDN OPTIONAL EXTRA: BELT CLIP FOR HANDSET EARSET 1 HOME
David Lewis DECT 36 x 275 mm 36 x 321 mm 220 g Black, aluminium, grey, yellow, blue 110 h / 15 h 5h Up to 50 m Up to 300 m 200 numbers with names 24 numbers with names 24 numbers / names Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Srig Thomsen DECT 53 x 160 x 33 mm 130 x 157 x 180 mm 175 g Black, light grey, blue, yellow, 200 h / 15 h 4h Up to 50 m Up to 300 m 200 numbers with names 24 numbers with names 24 numbers / names Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Srig Thomsen DECT 45 x 150 x 29 mm 58 x 160 mm 120 g Black, blue, beige 150 h / 12 h 4h Up to 50 m Up to 300 m 200 numbers with names 24 numbers / names
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes, 10 Yes

Yes Yes Black Yes Yes

Yes Yes Aluminium Yes Yes Yes Yes Yes Yes

EarSet 1 Home

EarSet 1 Mobile
EarSet 1 With EarSet 1 you can enjoy complete hands-free flexibility and the same exceptional sound quality thats found in any Bang & Olufsen telephone. It is available in both a left and right ear version and can be adjusted to ensure the most comfortable individual fit. The home version can be used with both BeoCom 6000 and BeoCom 4, and enables complete freedom of activity while talking on the phone. There is also a separate mobile version that can be used with your mobile telephone regardless of its make offering the same ergonomic comfort and sound quality.
DESIGNER DIMENSIONS WEIGHT FINISH CORD PLUG HOOK SWITCH ON/OFF *) PRINCIPLE
Anders Hermansen 35 x 59 x 14 mm, microphone arm 100 mm 20 g Aluminium 1.2 m Spring-probe Microphone: Electret Condenser Loudspeaker: Electro-dynamic In-ear type (intra concha earphone) EarSet 1 Home Left EarSet 1 Home Right

Anders Hermansen 35 x 59 x 14 mm, microphone arm 75 mm 20 g Aluminium 1.2 m 2.5 mm Jack Yes Microphone: Electret Condenser Loudspeaker: Electro-dynamic In-ear type (intra concha earphone) EarSet 1 Mobile Left and Right EarSet 1 Mobile Left and Right, 2.5 mm Jack with collar Adaptors

VARIANTS OPTIONAL EXTRA

*) PLEASE NOTICE THAT NOT ALL MOBILE PHONES DO SUPPORT THE HOOK ON/OFF BUTTON, WHEN USING AN ADAPTOR.

BeoCom 1401

BeoCom 1401 With a functionality thats as simple as the design itself, BeoCom 1401 is an ideal extra telephone for anywhere around the home. You can easily access all functions from the keypad in the handset, including your ten favourite numbers and a Redial function for the last number called. You can choose from four different colours. Whether on a wall or on a table, BeoCom 1401 stands out as an example of Bang & Olufsens simplicity in functionality.
DESIGNER DIMENSIONS WEIGHT COLOURS PLACEMENT ANNOUNCEMENT TOTAL SPEECH TIME CALLER ID WITH DATE AND HOUR VOICE ANNOUNCEMENT PHONEBOOK LOCAL MESSAGE CALL SCREENING INDICATOR FOR LINE BUSY INDICATOR FOR UNANSWERED CALLS LISTENING-IN VOLUME CONTROL CONTRAST ADJUSTMENT OF DISPLAY LIGHT IN DISPLAY ACTIVATED BY OPERATION CLOCK WITH DATE REMOTE CONTROL

BeoTalk 1200

DESIGNER DIMENSIONS WEIGHT COLOURS PLACEMENT MEMORY (PHONEBOOK) REDIAL VOLUME CONTROL MICROPHONE MUTE RINGER SETTINGS OPTIONAL EXTRA: TABLE HOLDER
Martin Iseli 50 x 200 x 60 mm 155 g Black, light grey, yellow, blue Wall 10 numbers 1 number Yes Yes Yes Yes
Srig Thomsen 185 x 36 x 131 mm 500 g Aluminium / natural Wall / table 3 kinds Up to 15 minutes 50 numbers 50 names Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
BeoTalk 1200 BeoTalk 1200 is an answering machine with a high I.Q. It can distinguish between individual callers with up to three different outgoing messages. It keeps track of the time and date of the most recent 50 incoming calls thanks to the Caller ID function, incoming calls will be noted whether they were answered or not. It will state the callers name if its stored in the Voice Announcement Phonebook. For daily functions, just use the three buttons on the front panel. BeoTalk 1200 is compatible with any of the BeoCom phones, adding to your ability to choose who you want to speak to and when.

Technical specifications

Serene
DESIGNER SYSTEM DIMENSIONS WEIGHT BATTERY CAPACITY - TALKTIME - STANDBY DISPLAY CAMERA RINGTONES VIBRATION ALERT MESSAGING WAP BLUETOOTH CLOCK ALARM CALENDER/SCHEDULER SYSTEM PHONEBOOK OPTIONAL EXTRA: EARSET 1 MOBILE CAR CHARGER TRAVEL CHARGER
David Lewis Triband (GSM 900, 1800, 1900 MHz) GPRS 65X70X24 mm 110 g 800 mAh Max 3 hours Max 250 hours 2.1, TFT 240 x 320 Pixels, 262K colours Yes, 300K Pixel 12 Polyphonic ringtones Yes Yes, SMS, EMS, MMS, Email Yes, 2.0 Yes Yes Yes Yes Yes, with BeoLine DECT

Yes Yes Yes

BEOLINK

BeoLab 3500

BeoLab 2000
BeoLab 3500 BeoLab 3500 is specially developed as a second-room loudspeaker in a BeoLink system. It can stand on top of a bookcase, hang on a wall or sit on a table or shelf. Wherever it stands, its active loudspeaker technology perfectly reproduces the sound from whichever source is selected. A small display, complete with clock and timer function, keeps you informed about which source is playing. You can access and adjust the sound of your TV via BeoLab 3500 using your Beo4 remote control, or listen and control CD or radio playing on your main room Bang & Olufsen music system.
DESIGNER DIMENSIONS / WEIGHT CABINET FINISH POWER CONSUMPTION POWER AMPLIFIERS LONG-TERM MAXIMUM OUTPUT POWER PER MODULE EFFECTIVE FREQUENCY RANGE CABINET PRINCIPLE MAGNETIC LEAKAGE WOOFER TWEETER CABINET VOLUME BASS EQUALISER CONNECTIONS: ACCESSORIES:
David Lewis 111 x 9.5 x 11 cm / 10 kg on wall / Aluminium / black Typical 15 W, standby 1.5 W 4 units, Class AB 71 W 56 20,000 Hz Bass Reflex Not shielded 9 cm 3 1/2" 1.8 cm 3/4" 0.8 litres Adaptive Bass Linearisation (ABL) Master Link (ML) Master Control Link (MCL) Stand
Anders Hermansen 40 x 29 x 16 cm / 6 kg / Aluminium / black Typical 12 W, standby 1.8 W 4 units, Class AB 41 W 61 20,000 Hz Bass Reflex Not shielded 10 cm 4" 2.5 cm 1" 1.3 litres Dynamic Master Link (ML)
BeoLab 2000 BeoLab 2000 lets you continue your audio experience throughout your house. Whether its a TV programme, DVD, CD, radio or digital music via a BeoPort connection, BeoLab 2000 enables you to hear the sound wherever you want to. It can be operated via your Beo4 remote control, or manually, via a small control panel in the front where you simply select the source you want to play. Inside is an integrated amplifier that ensures a sound thats close, even if the sound system isnt. Outside, youll find that its robust aluminium and metal construction makes it ideal in a kitchen or workshop, or anywhere where space is a premium, mounted on a shelf, wall or in a corner. Now youll never have to miss a musical note or the happy ending of a movie.

MULTIMEDIA

BeoPort
BeoPort With BeoPort you can enjoy Internet radio, plus access all the digital music files on your computer directly through your Bang & Olufsen music system, and from there send them out to any other linked room in your home. The interface is based on the same easy-to-use principles as our Beo4. BeoPort is compatible with all types of PC and with iTunes when used on a Mac. If you love to organise the music on your computer, we have a simple but effective and free software tool ready for you, BeoPlayer. Its a Bang & Olufsen digital music organiser that allows you to store and organise your CD collection directly on your computer. As an added option, BeoPorts unique interface also gives you full on-screen integrated control of all your Bang & Olufsen sources. Meaning, you can operate your music system and TV via your computer screen in your home office. You Can change between TV stations, switch over and listen to music, adjust the volume or change between tracks of a CD. The graphic display on your screen matches your Beo4 remote control display, creating a logical visual link, as well.