Stromausfall oder die Sicherheitsvorrichtung des Antriebes hat ausgelst (nach ca. 70 Minuten).

8. Entsorgung

Altgerte
Das ausgediente Gert ist am Ende seiner Lebensdauer entsprechend den nationalen Bestimmungen zu entsorgen. Es empfiehlt sich, mit einer auf Entsorgung spezialisierten Firma Kontakt aufzunehmen, oder sich mit der Entsorgungsabteilung Ihrer Kommune in Verbindung zu setzen.
Damit der Missbrauch und die damit verbundenen Gefahren ausgeschlossen sind, machen Sie Ihr Altgert vor der Entsorgung unbrauchbar. Dazu Gert von der Netzversorgung trennen und das Netzanschlusskabel vom Gert entfernen.
Fr die Entsorgung des Gertes beachten Sie die in Ihrem Land und in Ihrer Kommune geltenden Vorschriften.
Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten Germany - 16 -
Tel.: +49 (0) 5258 971-0 Service-Hotline: Fax: +49 (0) 5258 971-120 (14ct/Min. aus dem deutschen Festnetz)
Keep this instruction manual ready to hand at the product! 1. General Information 1.1 Information about the instruction manual 1.2 Key to symbols 1.3 Liability and Warrantees 1.4 Copyright protection 1.5 Declaration of conformity 2. Safety 2.1 General information 2.2 Safety instructions for use of the device 2.3 Intended use 3. Delivery, packaging and storage 3.1 Delivery check 3.2 Packaging 3.3 Storage 4. Technical data 4.1 Overview of parts 4.2 Technical specification 5. Installation and operation 5.1 Safety instructions 5.2 Installation and connection 5.3 Operating 6. Cleaning and maintenance 6.1 Safety advice 6.2 Cleaning 6.3 Safety instructions for maintenance 7. Possible Malfunctions 8. Waste disposal Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten Germany 20-24-26-30
phone: +49 (0) 5258 971-0 fax: +49 (0) 5258 971-120 - 17 -

1. General information

1.1 Information about the instruction manual
This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and generally applicable safety regulations. The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning.

1.2 Key to symbols

In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage.

WARNING!

This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases.

WARNING! Electrical hazard!
This symbol draws attention to potential electrical hazards. If you do not follow the safety instructions, you may risk injury or death.

CAUTION!

This symbol highlights instructions, which should be followed to avoid any risk of damage, malfunctioning and/or breakdown of the device.
This symbol highlights tips and information, which have to be followed for an efficient and trouble-free operation of the device.

- 18 -

1.3 Liability and Warrantees
All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. The German version of this instruction manual is definitive. If the delivery consists of a special model, the actual scope of delivery may differ from the descriptions and illustrations in this manual. This is also the case for special orders or when the device has been modified in line with new technology. If you have any questions, you should contact the manufacturer.
Read the instruction manual carefully before using the device. The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties.

1.4 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is copyright. No part of this publication may be reproduced, transmitted or used in any form or by any means without permission in writing from the manufacturer. Any person who commits any unauthorized act in relation to this publication shall be liable to claims for damages. All rights reserved.
The contents, texts, drawings, pictures and any other illustrations are copyright and subject to other protection rights. Any person unlawfully using this publication is liable to criminal prosecution.
1.5 Declaration of conformity
The device complies with the current standards and directives of the EU. We certify this in the EC declaration of conformity. If required we will be glad to send you the according declaration of conformity.

- 19 -

2. Safety
This section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers and labels on the device, which must be kept in a permanent state of legibility. By following all the important safety advice you gain an optimal protection against all hazards as well as the assurance of a safe and trouble-free operation.

2.1 General Information

This device is designed in accordance with the presently applicable technological standards. However, the device can pose a danger if handled improperly and inappropriately. Knowing the contents of the instruction manual as well as avoiding mistakes and thus operating this device safely and in a fault-free manner is very essential to protect yourselves from the hazards. To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken. This device may only be operated in technically proper and safe condition.
2.2 Safety instructions for use of the device
The specifications regarding the industrial safety are based on the Regulations of the European Union applicable at the time of manufacturing the device. If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with.

- 20 -

o The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device. Children should be observed to ensure that they are not playing with the device. Preserve this manual safely. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. The device is to be used indoors only.

o o o o

2.3 Intended use
Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. The device is not suitable for commercial use. The compact ice cream maker is meant for the preparation of ice cream, sorbets and frozen yogurt only.
Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. The operator is liable for all damages resulting from inappropriate use.

- 21 -

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carriers bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation.
If you liked to dispose the packing, consider the regulations applicable in your country. Supply re-usable packing materials to the recycling. Please inspect the device upon completeness. In case any part is missing please contact our customer service center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. Keep it dry and dust-free. Do not expose it to aggressive media. Do not expose it to direct sunlight. Avoid mechanical shocks and vibration. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. If required refresh or renew.

- 22 -

4. Technical data

4.1 Overview of parts

1. 2. 3. 4. 5. Control panel Housing with frigistor Connector for engine Cooling cylinder Removable ice cream container 6. 7. 8. 9. Filling port of the lid Transparent lid Engine Stirring staff
10. Ventilation slots 11. Lead with plug

Control panel

- 23 -

4.2 Technical data

Description
Order no.: Housing type: Connected load: Refrigerant: Ice cream production: Dimensions: Capacity ice cream container: Weight: We reserve the right to modifications! 230 V
Compact ice cream maker 135.001
Plastic ~ 50 Hz R134a approx. min. W 395 x D 290 x H 280 mm 1,4 litres 13,2 kg 180 W
5. Installation and operation

5.1 Safety instructions

The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. Cable must not touch any hot parts. See that the cable does not touch any heat sources or sharp edges. Do not let the cable dangle over the counter edge. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep away the cable from operating range and do not dunk it into water. Do not move or tilt the device when in operation.

- 24 -

WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation! Before installation the local power grid specification should be compared with that of the device (see type label). Connect the device only in case of compliance! Take note of the security advice!
5.2 Installation and connection
Discard the complete packing material after unpacking the device. Place the device on top of an even and safe surface which supports the weight of the device. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc.). You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. Place the device at a safe distance to children. Make sure there is a minimum distance of 15 cm between the wall and the back and the sides of the device, in order to provide sufficient air circulation. You must not block the ventilation slots. Wait at least one hour until the refrigerant has settled. Connect the device to a socket only afterwards. The electrical circuit in the socket must be secured to at least 16A. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity.

- 25 -

5.3 Operating
Before first use, clean all removable parts (stirring staff, lid, ice cream container) with warm water and a mild detergent. Dry all parts afterwards. Clean the engine and the housing of the device with a soft, damp cloth. Fill the removable ice cream container with the favored ice cream ingredients.

ATTENTION!

Ice cream container must not be filled more than halfway! During the final minutes of ice cream preparation the increasing volume of the ice cream fills up the container.
You should always fill the ice cream container with cooled ingredients and never with hot ingredients! Place the ice cream container into the cooling cylinder. Place the stirring staff into the ice cream container. Mount the lid safely on to the housing, so that it snaps into the provided fixations. Now install the engine so that it is connected with the stirring staff and the connector of the housing. Close the filling port of the lid with provided cover. Connect the device to an appropriate single power socket. The red control lamp flashes up. Engage the device using the ON/OFF switch The display shows the preset time of 50 minutes. The frigistor is engaged automatically after 2-3 minutes and starts cooling the ingredients in the ice cream container. The green control lamp flashes up. The stirring staff is automatically set into motion after 7 minutes. You may also manually engage it before by using the mix switch. By selecting the timer clock setting to 30, 15 or 5 minutes. on the control panel you may change the time on the control panel.

The preparation time for ice cream is approx. 50-60 minutes. During ice cream preparation, according to your taste, you may add e. g. fruits, chocolate chips, raisins, nuts, almonds etc. through the filling port of the lid. When the set time is reached a signal tone resounds and the device switches off the engine automatically. The frigistor continues operation for another 70 minutes until the cooling finally shuts off. After approx. minutes the cooling will be reengaged automatically.

- 26 -

If the mixer disengages sooner than the set time, manually disconnect the unit. The ice making process is then finished. Disconnect the device from the socket (pull the power plug!) and remove engine, lid and stirring staff from the ice cream container. Remove the ice cream container from the cooling cylinder and fill the ice cream into an appropriate container or an ice cream cup.
Remember to use a plastic or wooden spoon only when removing the ice cream in order to avoid damages of the ice cream container! The ready fixed ice cream may remain in the ice cream maker for minutes, while the stirring staff should be switched off. You may work the ice cream before serving until it has the desired consistency. After the ice cream has been removed from the ice cream container and the container has reached room/ambient temperature, it may be cleaned with warm water and a soft cloth. You may store the frozen ice cream in a container for some time but it will lose taste and quality after longer storage. After approx. 1-2 weeks the ice cream loses structure and freshness. Store the ice cream at a minimum temperature of 12 C. Mark the date of preparation and label the flavor name on the container.
Ice cream is susceptible to bacteria. Therefore the ice cream maker and the storage containers must be kept absolutely clean and dry. Do not refreeze melted or partly frozen ice cream! Approximately 20 minutes before serving the ice cream, take it out of the freezer and put the container into the refrigerator for 10 minutes. The ice cream may as well be stored at room/ambient temperature for 10 to 15 minutes in order to reach the appropriate temperature for consumption.

- 27 -

Always cool the ingredients. For better results in ice cream preparation we recommend that you beat the eggs and sugar with an electric blender prior to preparation, in order to increase the volume of the ice cream. Most of the recipes consist of cream, milk, eggs and sugar. You may use any cream you desire. Taste and consistency of the ice cream very much depend on the chosen ingredients: the more fat content, the firmer the ice cream. A heavy cream contains at least 36% fat, light cream contains 10-18% fat. Try to use a constant amount of liquid every time, e. g.: the lightest ice cream can be produced by using more milk than cream or milk only. You may as well use low fat milk although that affects the consistency of the ice cream. The Sorbets taste very much depends on the ripeness and sweetness of the fruits and the juice. Taste the fruits before using them as ingredients. If they are too sour, add some sugar, if they are very ripe instead, add little sugar or none at all. Please note, that cold reduces sweetness. In order to sweeten the ice cream during the preparation/production process, do not add the sugar or sweetener directly into the ice cream container (it will not dissolve). Instead dissolve the sugar in a bit of water or low-fat milk and pour the syrup (cooled) into the ice cream container. When using fruits in the recipe, they must always be washed and dried before preparation pulses always must be shelled and pitted. Fix a separate mix with these ingredients using a blender before adding them to the ice cream. When using eggs, make sure they are fresh. Many recipes refer to cooking, so prepare them a day before preparation, in order to ensure they are cold.

Possible Recipes

Strawberry ice cream
200 g sweet cream 100 g milk 150 g sugar 1 pack vanilla sugar 300 g strawberries

Chocolate ice cream

200 g sweet cream 100 g milk 150 g sugar 100 g chocolate 2 egg yolk

- 28 -

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug!!!) and has cooled down. o Do not use any acid agents and make sure no water ingresses the device. o To protect yourself from electric shock, never immerse the device, its cables and the plug in water or other liquids.
The device is not suited for direct washing via water jets. Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o o The device should be cleaned regularly. Clean all of the removable parts that get in contact with foods (lid, ice cream container, stirring staff) thoroughly with warm water and a mild detergent. Let the parts dry at air. Reattach the dry parts to the device. Clean the housing of the device and the removable engine with a soft, damp cloth.
Under no circumstances should you clean housing or engine under constantly running water! o Use soft cloth only and make sure you never use any kind of abrasive agents or pads, which could scratch the surface. o After the cleaning procedure you should use a soft and dry cloth to wipe dry and polish the surface. o Make sure the device has been cleaned and dried properly for further usage.
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the device when the cable is damaged. A damaged cable must immediately be replaced by customer service or a qualified electrician to avoid dangers. o In case of damage or malfunction, please contact your stockist or our customer service centre. Pay attention to the troubleshooting tips in pt. 7. o Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. - 29 -

7. Possible Malfunctions

PROBLEM Unsatisfying ice cream consistency Very long preparation time or unsatisfying ice cream consistency Device does not cool anymore and shuts down POSSIBLE CAUSE Ingredients are not cold/cool enough Ice cream container is too full Power breakdown or safety device of engine was activated (after approx. 70 minutes). SOLUTION Cool the ingredients sufficiently Reduce ingredients: Ice cream container must not be filled more than halfway Reengage the ON/OFF switch for cooling after approx. 2-3 minutes.