WARNING

INSTRUCTIONS FOR USE OF THE CHILD SAFETY SEAT. We advise you to read these instructions carefully and to ensure you are familiar with the product before using it. Please read these instructions carefully before use and retain them in a safe place for future reference. 1 - DO NOT install the child safety seat facing the rear on a front seat fitted with an airbag. DANGER OF DEATH OR SERIOUS INJURY. 2 - The seat can be used in the front (if allowed by current legislation) or on the rear seats. Folding seats must always be locked in place. This device must be used only on approved vehicles fitted with 3 point seat belts/static/retractable, approved to ECE/UN regulation or equivalent standard. 3 - Adjust the position of the vehicle's seats so as not to interfere with the correct fitting and effectiveness of the child safety seat: - Push the front passenger seat forward to install the child safety seat in the rear of the vehicle. - Push the front passenger seat backwards when installing in the front of the vehicle to use the length of the front seat belt to maximum advantage 4 - Ensure that the base of the child safety seat is solidly placed on the seat of the vehicle. Never leave your child unattended. This child safety seat is effective only if the fitting instructions are followed. For your own safety and that of your child, always place your child in the safety seat no matter how short the journey you are making. Even a slight accident can turn your child into a projectile. Always keep the child safety seat fitted even when the child is not being carried. Model approved for group 0+ (child weighing less than 13 Kg). The child safety seat must be fitted with its back to the direction of travel (group 0+) up to the age of 13 months (i.e. approximately 13 Kg). The manufacturer's liability extends only to what is contained in European Regulation (R44). This approval does not preclude due care and observation of the highway code. Never change the construction or materials of the seat or belt without consulting the manufacturer. Never place heavy objects on the rear parcel shelf to avoid them being flung forward in case of an accident. The user must always ensure that luggage and other objects which could injure the occupant of the seat in case of an accident are firmly fastened down. The temperature inside a vehicle can be very high, especially after it has stood in the sun for a long time. In such conditions, you are strongly advised to cover the child's seat with a cloth or other suitable item to to prevent the harness fastenings, in particular the metal parts, from becoming hot and burning the child. A new seat MUST be fitted after an accident. Always check that no part of the safety seat or harness is trapped under a seat or in the door of the vehicle. Do not use the child safety seat without its cover. Do not replace the seat cover with one not recommended by the manufacturer because the cover is an integral part of the restraint. Bb Confort products have been carefully designed and tested to ensure the complete safety and comfort of your baby. Use only accessories sold or approved by Ampafrance. The use of other accessories may be dangerous. After having put your baby in the seat, ensure that the belt is correctly tensioned by pulling the strap. Also ensure that the strap is not twisted. Care Before removal, ensure you have carefully noted the way which the various parts are attached to the seat so as to facilitate reassembly. To give perfect satisfaction, the product must be cared for regularly. Fabric: Before cleaning check the label sewn into the fabric, you will find the wash symbols indicating the method of washing each item. Shell: Washing symbols : Hand wash only Machine wash 30 Hand wash only Do not use bleach (Chlorine) Do not dry clean Do not tumble dry Do not iron Clean the shell using a damp cloth.