the BEHRINGER AB200. This high-quality 2-channel A/B switch is designed for musicians who use several amps and/or instruments. The AB200 allows you to switch between gear noiselessly and instantaneously without coloring the sound of your instrument. The LED always displays which element of your system is currently being used.
DUAL A/B SWITCH AB200 + The AB200 has no on/off switch. As soon as you Thank you for showing your confidence in us by purchasing
insert a jack into the A1 or B1 connector, the AB200 begins running. When not using the AB200, remove the jacks from the connectors. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom of the unit.
1. CONTROLS AND CONNECTIONS

2. APPLICATIONS

Fig. 1.1: Rear view Since the controls and connections of the two channels are identical, this chapter only describes channel 1. IN/OUT 1: this 1/4" TS jack serves as channel 1 input when a source is plugged in (guitar, bass etc.) and as channel 1 output when an amp or an effect is plugged in. A1 & B1: these 1/4" TS jacks serve as channel 1 outputs when amps or effects are plugged in; they serve as channel 1 inputs when instruments are plugged in. Only one of these connectors can be active at any one time. LATCH/NON LATCH: this selector determines the channel switch function: when set to LATCH, the switch is latching. When set to NON LATCH, the signal will only be routed to or from B1 as long as you hold the pedal depressed. Fig. 2.1: One instrument / two amps Plug your instrument into IN/OUT 1 and the input of each amp into one of the A1 and B1 connectors. Pressing the switch 1 will toggle between the two amps.
Fig. 1.2: Top view SWITCH 1: this switch allows you to assign the IN/OUT 1 signal to A1 or B1 when IN/OUT 1 is used as an input. Otherwise, the switch assigns the A1 or B1 signal to IN/OUT 1 when A1 and B1 are used as inputs. The A1 and B1 LEDs display which connector is currently active. Depending on the selector position, shortly press the switch (LATCH) or hold it down during the whole commutation time (NON LATCH) to toggle between A1 and B1. To install or replace the 9 V battery, please carefully unscrew the bottom plate and open the enclosure of the AB200. After installing close the unit again by using all screws you removed before.
Fig. 2.2: Two instruments / one amp Plug each of your instruments into one of the A1 and B1 connectors and the amp input into IN/OUT 1. Pressing the switch 1 will toggle between the two instruments.

DUAL A/B SWITCH AB200

Betreibe das Gert nicht in der Nhe von Wasser oder Wrmequellen. Verwende bitte nur autorisiertes Zubehr. Fhre bitte keinerlei Reparaturen am Gert eigenstndig durch. Reparaturen sind nur von qualifiziertem Fachpersonal vorzunehmen. Non usare in prossimit dellacqua o installare vicino a fonti di calore. Usare solo collegamenti ed accessori approvati. Non tentare di riparare lapparecchio da s. Contattare il nostro personale specializzato per eseguire operazioni di manutenzione e riparazione. Niet gebruiken in de buurt van water of warmtebronnen. Gebruik uitsluitend geautoriseerde uitbreidingen/originele accessoires. Probeer nooit zelf het apparaat te repareren. Neem voor reparaties of onderhoud contact op met de leverancier.
Nieuywawpobliuwodyaninieinstalowawpobliurdeciepa. Stosowawyczniedodatki/akcesoriadopuszczoneprzezproducenta.Nie naprawiaurzdzeniasamodzielnie.Serwisowanieinaprawyzlecanaszemu wykwalifikowanegopersonelowi.

l kyt laitetta veden tai lmmnlhteiden lhell. Kyt vain hyvksyttyj listarvikkeita. l tee laitteeseen itse minknlaisia korjauksia. Ainoastaan ptev ammattihenkilkunta saa suorittaa korjaukset; tm koskee. M ikke anvendes i nrheden af vand eller installeres i nrheden af varmeenheder. Brug kun godkendte tilslutninger/tilbehr. Forsg ikke selv at reparere produktet. Kontakt vores kvalificerede servicepersonale for at f udfrt service og reparation.
Fig. 2.3: Two instruments / two amps Two AB200 channels are needed for this application: plug each instrument into one of the A1 and B1 connectors and each amp input into one of the A2 and B2 connectors. Link IN/OUT 1 and IN/OUT 2 plugs using a short cable. Pressing the switch 1 toggles between the two instruments while pressing the switch 2 toggles between the two amps.
Fr inte anvndas i nrheten av vatten eller installeras nra vrmekllor. Anvnd endast godknda delar/tillbehr. Utfr aldrig sjlv ngon service p produkten. Kontakta vr kvalificerade servicepersonal fr service eller reparationer. No utilize na proximidade de gua, nem instale perto de fontes de calor. Use apenas conexes e acessrios autorizados. No repare o seu produto. Contacte o nosso pessoal qualificado para consertos ou reparaes. . /. . , .

3. WARRANTY

For our current warranty terms and conditions, please refer to our website at http://www.behringer.com.

4. SPECIFICATIONS

In 1, In 2, Out A, Out B Connector Impedance Battery Power consumption Dimensions (H x W x D) Weight 1/4" TS relais hard bypass 9 V type 6LR61 <30 mA approx. 46 mm (1 4/5") x 14 mm (5 1/4") x 89 mm (3 1/2") approx. 0.28 kg (0.62 lbs)
Die deutsche Anleitung ist erhltlich @ www.behringer.com Manuel francophone en tlchargement sur www.behringer.com Manual en espaol disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com
@www.behringer.com Polskainstrukcjadostpnajestpodadresem@www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen kyttohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgnglig p www.behringer.com Dansk vejledning findes p @ www.behringer.com Manual portugus disponvel @ www.behringer.com www.behringer.com
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

5. SAFETY INSTRUCTIONS

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs. No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice slo accesorios y aditamentos autorizados. No intent reparar el producto usted mismo. Contacte a nuestro personal tcnico cualificado para servicio y reparaciones.

. . . .

Ne pas utiliser ni installer proximit de liquide ou de sources de chaleur. Utilisez exclusivement les accessoires autoriss. Ne ralisez pas de maintenance vous-mme sur le produit. Contactez notre personnel technique pour tout service ou rparation.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. 2005 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany. Tel. +9206 0, Fax +9206 4903