DSP1124P

Technical Specifications

Version 1.0 June 2001

FEEDBACK DESTROYER PRO

www.behringer.com

ENGLISH
FEEDBACK DESTROYER PRO DSP1124P
24-Bit Dual Engine Digital Feedback Destroyer/Parametric EQ Model DSP1124P
I Ultra-high performance 2-channel digital Feedback Destroyer/parametric EQ powered by a 24-bit high-speed DSP I 24-bit A/D and D/A converters with 64/128 times oversampling for ultra-high headroom and resolution I Automatically and intelligently searches out and destroys up to 12 frequencies per channel I 24 fully programmable parametric filters that can be set manually or via MIDI
I Set-and-forget default setting enables immediate and super-easy Feedback Destroyer performance
I Single-Shot mode automatically searches and destroys feedback and locks the filter until you reset it manually I Auto mode continuously monitors the mix, resetting programmed filters automatically
I Manual mode allows for setting up to 2 x 12 fully parametric filters including frequency, bandwidth and gain I Single-Shot, Auto and Manual modes are assignable for each filter
I Free FEEDBACK DESTROYER design software allows for total remote control via PC (download at www.behringer.com) I Two digital processing engines give you independent or coupled functions on left and right channels
I Servo-balanced inputs and outputs on gold plated XLR and 1/4" TRS connectors for high signal integrity I Internal 24-bit processing with professional 46 kHz sampling rate
I Full MIDI capability and user preset memories to store programs for instant recall
I Accurate eight-segment LED level meters simplify level setting for optimum performance I Future-proof software-upgradeable architecture
I High-quality components and exceptionally rugged construction ensure long life and durability I Internal power supply design for professional application I Manufactured under ISO9000 certified management system 2

,52 "2

SPECIFICATIONS
AUDIO INPUTS Connectors Type Impedance Nominal Operating Level Max. Input Level AUDIO OUTPUTS Connectors Type Impedance Max. Output Level SYSTEM SPECIFICATIONS Bandwidth Noise THD Crosstalk MIDI INTERFACE Type DIGITAL PROCESSING Converters Sampling Rate DISPLAY Type POWER SUPPLY Mains Voltages
XLR and 1/4" TRS RF filtered, servo-balanced input 60 kOhms balanced, 30 kOhms unbalanced -10 dBV to +4dBu (switchable) +16 dBu at +4 dB nominal level, +2 dBV at -10 dBV nominal level
XLR and 1/4" TRS Electronically servo-balanced output stage 60 Ohms balanced, 30 Ohms unbalanced +16 dBu at +4 dB nominal level, +2 dBV at -10 dBV nominal level
20 Hz to 20 kHz, -3 dB > 94 dB, unweighted, 20 Hz to 20 kHz 0.0075 % typ. @ +4 dBu, 1 kHz, Gain 1 < -76 dB
5-Pin-DIN-Socket IN / OUT / THRU
24-bit Sigma-Delta, 64/128-times Oversampling 46,875 kHz
2 -digit numeric LED-Display
Power Consumption Fuse Mains Connection PHYSICAL Dimensions (H x W x D) Net Weight Shipping Weight
USA/Canada 120 V ~, 60 Hz U.K./Australia 240 V ~, 50 Hz Europe 230 V ~, 50 Hz General Export Model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz approx. 15 Watts max. 100 - 120 V ~: T 200 mA H 200 - 240 V ~: T 100 mA H Standard IEC receptacle
approx. 1 3/4" (44.5 mm) x 19" (482.6 mm) x 7 1/2" (190.5 mm) approx. 2 kg approx. 3 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER and FEEDBACK DESTROYER are registered trademarks. ALL RIGHTS RESERVED. 2001 BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Mnchheide II, Germany Tel. +49 (0) / 92 06-0, Fax +49 (0) / 92 06-30

6.3 mm 30 k +4 dBu +4 dBu +2 dBV

-10 dBV

XLR 60 +16 dBu
6.3 mm 30 +4 dBu +2 dBV -10 dBV

S/N THD

20 Hz 20 kHz +/- 3 dB > 94 dB unweighted 20 Hz 0.0075 % typ. @ +4 dBu 1 kHz < -76 dB

20 kHz 1

IN / OUT / THRU

24-Bit 46.875 kHz

64/128
120 V ~ 60 Hz 240 V ~ 50 Hz 230 V ~ 50 Hz 100 - 120 V ~ 200 - 240 V ~ 50 - 60 Hz 15 W 100 - 120 V ~: 200 - 240 V ~: IEC
1 3/4" (44.5 mm) 2 kg 3 kg

19" (482.6 mm)

7 1/2" (190.5 mm)

BEHRINGER

DSP1124P_JPN_Rev A.pdf 13