SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding. Integrated 10/100 4-Port Switch The Router has a built-in, 4-port network switch to allow your wired computers to share printers, data and MP3 files, digital photos, and much more. The switch features automatic detection so it will adjust to the speed of connected devices. The switch will transfer data between computers and the Internet simultaneously without interrupting or consuming resources. Universal Plug-and-Play (UPnP) Compatibility UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Support for VPN Pass-Through If you connect to your office network from home using a VPN connection, your Router will allow your VPN-equipped computer to pass through the Router and to your office network. Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup.
MAC Address Filtering For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your network. Every computer has its own MAC address. Simply enter these MAC addresses into a list using the web-based user interface and you can control access to your network. Applications and Advantages Economically connect multiple computers to a single Internet connection SOHO (Small Office/Home Office) networking needs Provides the easy and quick small network installation SOHO users need. Package Contents Belkin 54g Wireless Cable/DSL Gateway Router Vertical Mounting Base (optional use) Category 5 Networking cable Power Supply Belkin Easy Install Wizard Software CD User Manual
System Requirements Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer CAT5 networking cable (or better) Microsoft Internet Explorer 4.0 or later, or Netscape 4.0 or later Easy Install Wizard Software System Requirements A PC running Windows 98, Me, 2000, or XP Minimum 64MB RAM Internet Browser Note: At the time of printing, a version of the Easy Install Wizard was not available for Mac OS users. Please check www.networking.belkin.com to see if a Mac OS version of the Easy Install Wizard is now available.

KNOWING YOUR BELKIN ROUTER
The Router has been designed to be placed on a desktop vertically or horizontally, or it may be mounted to a wall. The slim design minimizes the desktop space required when placed vertically. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status. 1. Power/Ready LED When you apply power to the Router or restart it, a short period of time elapses while the Router boots up. During this time, the Power/Ready LED blinks. When the Router has completely booted up, the Power/Ready LED becomes a SOLID light, indicating the Router is ready for use. OFF Blinking Green Solid Green Router is OFF Router is Booting Up Router is Ready

(4) (5)

4. WAN Status LED This LED lights in GREEN to indicate that your modem is connected properly to the Router. It blinks rapidly when information is being sent over the port between the Router and the modem. OFF Solid Green Blinking Green No WAN Link Good WAN Link WAN Activity
2. Wireless Network LED OFF Wireless Network is OFF Green Blinking Wireless Network is Ready Indicates Wireless Activity
3. LAN Port-Status LEDs These LEDs are labeled 14 and correspond to the numbered ports on the rear of the Router. When a computer is properly connected to one of the LAN ports on the rear of the Router, the LED will light. GREEN means a 10Base-T device is connected, AMBER means a 100Base-Tx device is connected. When information is being sent over the port, the LED blinks rapidly. OFF Green Orange No Device is Linked to the Port 10Base-T Device Connected 100Base-Tx Device Connected
5. Connected LED This unique LED shows you when the Router is connected to the Internet. When the light is OFF, the Router is NOT connected to the Internet. When the light is blinking, the Router is attempting to connect to the Internet. When the light is solid GREEN, the Router is connected to the Internet. When using the Disconnect after x minutes feature, this LED becomes extremely useful in monitoring the status of your Routers connection. OFF Blinking Green Solid Green Router is not Connected to the Internet Router is Attempting to Connect to the Internet Router is Connected to the Internet
Blinking (Orange or Green) Port Activity
9. Reset Button The Reset button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Routers normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. a. Resetting the Router Push and release the Reset button. The lights on the Router will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the reset is complete. b. Restoring the Factory Defaults

6. Power Jack Connect the included 5V DC power supply to this jack. 7. LAN Ports The LAN ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. 8. Internet/WAN Port This port is for connection to your cable or DSL modem. Use the cable that was provided with the modem to connect the modem to this port. Use of a cable other than the cable supplied with the cable modem may not work properly.
Press and hold the Reset button for five seconds then release it. The lights on the Router will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the restore is complete.
PLACEMENT OF YOUR WIRELESS ROUTER
Proper placement of your Router is important to ensure the best performance of your wireless network. Typically, indoors your Wireless Router can provide a circular coverage area of 250 feet or more. However, different types of construction materials and other obstructions in a building can greatly affect the wireless signal and decrease the range. Whenever possible, your Router should be placed as close as possible to the center of the area that you want to cover. In multi-story homes, place the Router on a floor that is as close to the center of the home as possible; this may mean placing the Router on an upper floor. Use care when choosing the location of your Router Be aware of appliances or large objects such as a refrigerator or washer/dryer unit that may be on the opposite side of a wall from where you decide to place your Router. Place the Router on top of a desk and away from metal cabinets and computer cases. Do not place objects or components on top of the Router. Make sure that both antennas are pointing UP at all times. Metallic-based UV window tint can affect wireless performance. Do not place the Router next to a tinted window. We realize that in the real world, it may not be possible to place your Router in the center of your coverage area. In cases where you may experience difficulty covering the entire area you want, try placing the Router as high as possible. Wireless devices work best in a line-of-sight situation where there are no obstacles between the wireless computer and the Router. The Router may also be mounted to a wall with the antennas facing UP. There are other options for expanding your wireless coverage area. Visit www.networking.belkin.com for solutions. The wireless signal can be affected by many things including neighboring wireless networks, microwave ovens in operation, and 2.4GHz cordless phones. While these things can affect the network performance, your wireless network typically will work fine under most conditions where these devices exist.
CONNECTING AND CONFIGURING YOUR CABLE/DSL ROUTER
Verify the contents of your box. You should have the following: Belkin Cable/DSL Gateway Router Vertical Mounting Base (optional use) Category 5 Networking Cable (for connection of the Router to the computer) Power Supply Belkin Easy Install Wizard Software CD User Manual Modem Requirements Your cable or DSL modem must be equipped with an RJ45 Ethernet port. Many modems have both an RJ45 Ethernet port and a USB connection. If you have a modem with both Ethernet and USB, and are using the USB connection at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure. If your modem has only a USB port, you can request a different type of modem from your ISP, or you can, in some cases, purchase a modem that has an RJ45 Ethernet port on it.

5.3 Click Add computers.

5.4 The Wizard will make the changes needed to add your computer to the network. When finished, it will prompt to reboot your computer. Click Yes.
5.5 When your computer reboots, your computer will be connected to the network. To begin surfing the Internet, open your browser and go to your favorite web page. You are finished adding the computer to the network. To add more computers, repeat this process on each computer you wish to add.

ALTERNATE SETUP METHOD

The Advanced User Interface is a web-based tool that you can use to set up the Router if you dont want to use the Easy Install Wizard. You can also use it to manage advanced functions of the Router. From the Advanced User Interface, you can perform the following tasks: View the Routers current settings and status. Configure the Router to connect to your ISP with the settings that they provided you. Change the current network settings such as the Internal IP address, the IP address pool, DHCP settings and more. Set the Routers firewall to work with specific applications (port forwarding). Set up security features such as client restrictions and MAC address filtering. Enable the DMZ feature for a single computer on your network. Change the Routers internal password. Enable/Disable UPnP (Universal Plug-and-Play). Reset the Router. Back up your configuration settings. Reset the Routers default settings. Update the Routers firmware.
1.4 Connect a new network cable (not included) from the back of the computer to one of the ports labeled 14. Note: It does not matter which numbered port you choose. 1.5 Turn your cable or DSL modem on by reconnecting the power supply to the modem.
Computer that was originally connected to the cable or DSL modem New network cable (to computer)
Alternative Method Step 1:
Connecting your Gateway Router 1.1 Turn off the power to your modem by unplugging the power supply from the modem. 1.2 Locate the network cable that is connected between your modem and your computer and unplug it from your computer, leaving the other end connected to your modem. 1.3 Plug the loose end of the cable you just unplugged into the port on the back of the Router labeled Internet/WAN.

6. LAN Settings Shows you the settings of the Local Area Network (LAN) side of the Router. Changes can be made to the settings by clicking on any one of the links (IP Address, Subnet Mask, DHCP Server) or by clicking the LAN Quick Navigation link on the left side of the screen. 7. Features Shows the status of the Routers NAT, firewall, and wireless features. Changes can be made to the settings by clicking on any one of the links or by clicking the Quick Navigation links on the left side of the screen. 8. Internet Settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings can be made by clicking on the links or by clicking on the Internet/WAN Quick Navigation link on the left side of the screen. 9. Version Info Shows the firmware version, boot-code version, hardware version, and serial number of the Router. 10. Page Name The page you are on can be identified by this name. This manual will sometimes refer to pages by name. For instance LAN > LAN Settings refers to the LAN Settings page.
Alternative Method Step 4:
Configuring your Router for Connection to your ISP The Internet/WAN tab is where you will set up your Router to connect to your Internet Service Provider. The Router is capable of connecting to virtually any Internet Service Providers system provided you have correctly configured the Routers settings for your ISPs connection type. Your ISP connection settings are provided to you by your ISP. To configure the Router with the settings that your ISP gave you, click Connection Type (A) on the left side of the screen. Select the connection type you use. If your ISP gave you DNS settings, clicking DNS (B) allows you to enter DNS address entries for ISPs that require specific settings. Clicking MAC address (C) will let you clone your computers MAC address or type in a specific WAN MAC address, if required by your ISP. When you have finished making settings, the Internet Status indicator will read connection OK if your Router is set up properly.
Setting your Connection Type From the connection type page, you can select the type of connection you use. Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking Next (2).

(A) (B) (C)

Setting your ISP Connection Type to Dynamic IP A dynamic connection type is the most common connection type found with cable modems. Setting the connection type to dynamic in many cases is enough to complete the connection to your ISP. Some dynamic connection types may require a host name. You can enter your host name in the space provided if you were assigned one. Your host name is assigned by your ISP. Some dynamic connections may require that you clone the MAC address of the PC that was originally connected to the modem.

Setting your ISP Connection Type to Static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. This information is available from your ISP or on the paperwork that your ISP left with you. Type in your information, then click Apply Changes (5). After you apply the changes, the Internet Status indicator will read connection OK if your Router is set up properly.

(1) (2) (3)

(1) (2) (3) (4)
1. Host Name This space is provided to enter a host name that needs to be visible to your ISP. Enter your host name here and click Apply Changes (3). If your ISP did not assign you a host name, or you are not sure, leave this blank. 2. Change WAN MAC Address If your ISP requires a specific MAC address to connect to the service, you can enter a specific MAC address or clone the current computers MAC address through this link.
1. IP Address Provided by your ISP. Enter your IP address here. 2. Subnet Mask Provided by your ISP. Enter your subnet mask here. 3. ISP Gateway Address Provided by your ISP. Enter the ISP gateway address here. 4. My ISP Provides More Than One Static IP Address If your ISP assigns you more than one static IP address, your Router is capable of handling up to five static WAN IP addresses. Select My ISP provides more than one static IP address and enter your additional addresses.
Setting Custom Domain Name Server (DNS) Settings A Domain Name Server is a server located on the Internet that translates Universal Resource Links (URLs) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. The Automatic from ISP box (1) should be checked if your ISP did not give you a specific DNS address. If you are using a static IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly. If your connection type is dynamic or PPPoE, it is likely that you do not have to enter a DNS address. Leave the Automatic from ISP box checked. To enter the DNS address settings, uncheck the Automatic from ISP box and enter your DNS entries in the spaces provided. Click Apply Changes (2) to save the settings.

Blocking an ICMP Ping Computer hackers use what is known as pinging to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there. The Router can be set up so it will not respond to an ICMP ping from the outside. This heightens the level of security of your Router.

Utilities Tab

Utilities This screen lets you manage different parameters of the Router and perform certain administrative functions. To turn off the ping response, select Block ICMP Ping (1) and click Apply Changes. The Router will not respond to an ICMP ping.
Restarting the Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings.
4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router will be restarted. The Router home page should appear automatically. If not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser.
Restarting the Router to Restore Normal Operation 1. Click the Restart Router button. 2. The following message will appear. Click OK.
Restoring Factory Default Settings Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults.
3. The following message will appear. Restarting the Router can take up to 60 seconds. It is important not to turn off the power to the Router during the restart.
1. Click the Restore Defaults button.
2. The following message will appear. Click OK.
Saving a Current Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
3. The following message will appear. Restoring the defaults includes restarting the Router. It can take up to 60 seconds. It is important not to turn the power to the Router off during the restart. 1. Click Save. A window called File Download will open. Click Save.

4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Routers defaults will be restored. The Router home page should appear automatically. If it does not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser.
2. A window will open that allows you to select the location where you want to save the configuration file. Select a location. You can name the file anything you want, or use the default name Config. Be sure to name the file so you can locate it yourself later. When you have selected the location and name of the file, click Save.
Restoring a Previous Configuration This option will allow you to restore a previously saved configuration.
1. Click Browse. A window will open that allows you to select the location of the configuration file. All configuration files end with a.bin. Locate the configuration file you want to restore and double-click on it.
3. When the save is complete, you will see the window below. Click Close.
The configuration is now saved.
2. You will be asked if you want to continue. Click OK.

Updating Firmware

From time to time, Belkin may release new versions of the Routers firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Routers firmware to the latest version.
3. A reminder window will appear. It will take up to 60 seconds for the configuration restoration to complete. Click OK.
4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Routers configuration will be restored. The Router home page should appear automatically. If not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser.
Checking for a New Version of Firmware The Check Firmware (1) button allows you to instantly check for a new version of firmware. When you click the button, a new browser window will appear informing you that either no new firmware is available or that there is a new version available. If a new version is available, you will have the option to download it.
Downloading a New Version of Firmware If you click the Check Firmware button and a new version of firmware is available, you will see a screen such as the following. 1. To download the new version of firmware, click Download.

2. A window will open that allows you to select the location where you want to save the firmware file. Select a location. You can name the file anything you want, or use the default name. Be sure to locate the file in a place where you can locate it yourself later. When you have selected the location, click Save.
3. When the save is complete, you will see the following window. Click Close.
The download of the firmware is complete. To update the firmware, follow the next steps in Updating the Routers Firmware.
Updating the Routers Firmware 1. In the Firmware Update page, click Browse (2). A window will open that allows you to select the location of the firmware update file. All firmware files end with a.dlf.
5. You will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted. Click OK.
6. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router firmware update will be complete. The Router home page should appear automatically. If not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser. 2. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name. 3. The Update Firmware box will now display the location and name of the firmware file you just selected. Click Update.
The firmware update is complete.
4. You will be asked if you are sure you want to continue. Click OK.

Changing System Settings

The System Settings page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the NAT function of the Router. Setting or Changing the Administrator Password The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future. It is also recommended that you set a password if you plan to use the remote management feature of your Router.
Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to record the security log and control client filtering. Select the time zone that you reside in. If you reside in an area that observes Daylight Saving, then place a check mark in the box next to Enable Daylight Saving. The system clock may not update immediately. Allow at least 15 minutes for the Router to contact the time servers on the Internet and get a response. You cannot set the clock yourself.

Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnPcompliant. Some applications require the Routers firewall to be configured in a specific way to operate properly. This usually requires opening TCP and UDP ports, and in some instances, setting trigger ports. An application that is UPnPcompliant has the ability to communicate with the Router, basically telling the Router which way it needs the firewall configured. The Router ships with the UPnP feature disabled. If you are using any applications that are UPnPcompliant, and wish to take advantage of the UPnP features, you can enable the UPnP feature. Simply select Enable in the UPnP Enabling section of the Utilities page. Click Apply Changes to save the change.
Enabling/Disabling Auto Firmware Update This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available. When you log into the Routers advanced interface, the Router will perform a check to see if new firmware is available. If so, you will be notified. You can choose to download the new version or ignore it. The Router ships with this feature enabled. If you want to disable it, select Disable and click Apply Changes.
MANUALLY CONFIGURING NETWORK SETTINGS
Set up the computer that is connected to the cable or DSL modem FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet. Manually Configuring Network Settings in Mac OS up to 9.x 1. Pull down the Apple menu. Select Control Panels and select TCP/IP. 2. You will see the TCP/IP control panel. Select Ethernet Built-In or Ethernet in the Connect via: drop-down menu (1).

(1) (2)

4. If not already set, at Configure:, choose Using DHCP Server. This will tell the computer to obtain an IP address from the Router.
5. Close the window. If you made any changes, the following window will appear. Click Save.

3. Next to Configure (2), if Manually is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. Restart the computer. When the computer restarts, your network settings are now configured for use with the Router.
MANUALLY CONFIGURING NETWORK SETTINGS IN MAC OS X
Manually Configuring Network Settings in Mac OS X
1. Click on the System Preferences icon.
4. Select the TCP/IP tab (3). Next to Configure (4), you should see Manually or Using DHCP. If you do not, check the PPPoE tab (5) to make sure that Connect using PPPoE is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password. 5. If Manually is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.
2. Select Network (1) from the System Preferences menu.
6. If not already selected, select Using DHCP next to Configure (4), then click Apply Now. Your network settings are now configured for use with the Router. 3. Select Built-in Ethernet (2) next to Show in the Network menu.

(5) (2) (3)

MANUALLY CONFIGURING NETWORK SETTINGS IN WINDOWS 2000, NT, OR XP
1. Click Start, Settings, then Control Panel. 2. Double-click on the Network and dial-up connections icon (Windows 2000) or the Network icon (Windows XP). 3. Right-click on the Local Area Connection associated with your network adapter and select Properties from the drop-down menu. 4. In the Local Area Connection Properties window, click Internet Protocol (TCP/IP) and click the Properties button. The following screen will appear:
MANUALLY CONFIGURING NETWORK SETTINGS IN WINDOWS 98 OR ME
1. Right-click on My Network Neighborhood and select Properties from the drop-down menu. 2. Select TCP/IP -> settings for your installed network adapter. You will see the following window.
5. If Use the following IP address (2) is selected, your Router will need to be set up for a static IP connection type. Write the address information the table below. You will need to enter this information into the Router.
3. If Specify and IP address is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. 4. Write the IP address and subnet mask from the IP Address tab (3). 5. Click the Gateway tab (2). Write the gateway address down in the chart.

6. If not already selected, select Obtain an IP address automatically (1) and Obtain DNS server address automatically (3). Click OK. Your network settings are now configured for use with the Router.
6. Click the DNS Configuration tab (1). Write the DNS address(es) in the chart.
RECOMMENDED WEB BROWSER SETTINGS
In most cases, you will not need to make any changes to your web browsers settings. If you are having trouble accessing the Internet or the advanced webbased user interface, then change your browsers settings to the recommended settings in this section. Internet Explorer 4.0 or Higher 1. Start your web browser. Select Tools then Internet Options.
7. If not already selected, select Obtain IP address automatically on the IP address tab. Click OK. Restart the computer. When the computer restarts, your network settings are now configured for use with the Router.
2. In the Internet Options screen, there are three selections: Never dial a connection, Dial whenever a network connection is not present, and Always dial my default connection. If you can make a selection, select Never dial a connection. If you cannot make a selection, go to the next step.
3. Under the Internet Options screen, click on Connections and select LAN Settings.
Netscape Navigator 4.0 or Higher 1. Start Netscape. Click on Edit then Preferences. 2. In the Preferences window, click on Advanced then select Proxies. In the Proxies window, select Direct connection to the Internet.
4. Make sure there are no check marks next to any of the displayed options: Automatically detect settings, Use automatic configuration script, and Use a proxy server. Click OK. Then click OK again in the Internet Options page.

TROUBLESHOOTING

You can find technical support information at www.networking.belkin.com or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call 800-223-5546. The Easy Install Wizard is not able to find my Router.
1. Make sure that the Router is ON. The Power/Ready light will be on GREEN and SOLID. Check the power supply connection at the wall and the Router. 2. Make sure that the LAN link light that corresponds to the port you connected to the computer is ON. Check the network cable going from the computer to the Router. 3. If the Easy Install Wizard told you that it detected multiple network adapters, run the Easy Install Wizard again and try a different adapter. The WAN link LED is not on or I cannot connect to the cable or DSL modem. 1. Check the connection between the Router and the cable or DSL modem. Make sure the network cable from the cable or DSL modem is connected to the port on the Router labeled Internet/WAN. 2. Make sure the cable or DSL modem is powered and switched on. 3. Make sure the Router has power. The Power/Ready LED should be illuminated. 4. Make sure the cable between the modem and the Router is the cable that was provided with the modem.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Components may void the users authority to operate the equipment.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations of exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

Covered Belkin Wireless Products
SKU 1 B5D036 F1UP0001 F5D6000 F5D6001 F5D6020 F5D6050 F5D6050-APL F5D6051 F5D6060 F5D6130 F5D6230-3 F5D6230-4 F5D6231-4 F5D6231-4-APL F5D7000 F5D7001 F5D7010 F5D7010-APL F5D7011 F5D7050 F5D7130 F5D7230-4 F5D72314 F5D7231-4P F5D7233 F5D7330 F5D8000 F5D8010 F5D8230-4 F5D9009 F5D9010 F5D9013 F5D9050 F5D9230-4 F6D3000 F6D3010 F6D3230-4 Description Wireless 125Mbps 802.11g w/HSM Wireless PCI Card 802.11g Wireless Print Server 11Mbps 802.11b Wireless PCI Adapter 11Mbps 802.11b Wireless PCI Card Wireless 11Mbps 802.11b PCMCIA Wireless Card 11Mbps 802.11b Wireless USB Enet Adapter Wireless 802.11B USB Adapter - Apple Branded Wireless 802.11B USB Adapter Wireless 802.11B Compact Flash Card 11Mbps Wireless Network Access Point 802.11b Wireless 802.11B Cable/DSL Gateway Router Wireless 802.11B Cable/DSL Gateway Router 802.11B Wireless Cable/DSL Router 4Port Wireless 802.11B Cable/DSL Gateway Router - Apple Branded Wireless 54Mbps 802.11g Wireless PCI Card Wireless 125Mbps 802.11g w/HSM Wireless PCI Card Wireless 54Mbps 802.11g PCMCIA Wireless Card Wireless G Notebook Card Wireless 125Mbps 802.11g PCMCIA Wireless Card Wireless 54Mbps 802.11g Wireless USB 2.0 Card 802.11g Wireless Access Point Wireless 802.11g Cable/DSL Gateway Router 4Port Wireless 125Mbps 802.11g 4Port Cable/DSL Router Wireless 125Mbps 802.11g Router w/Print Server Wireless G Travel Router Wireless 802.11g Wireless Bridge Wireless Pre-N Wireless Desktop Card Wireless Pre-N Notebook Card Wireless Pre-N 802.11g Cable/DSL Router 4Port Wireless 802.11G Range Expander Kit Wireless-G Plus MIMO Network PCMCIA Card Wireless Pre-N Networking Kit - Router and Card Wireless-G Plus MIMO USB Adapter Wireless-G Plus MIMO Router w/4Port Enet Switch Wireless A/G Desktop Card Wireless 54Mbps 802.11A/G PCMCIA Wireless Card 802.11A/G Wireless Cable/DSL Router 4Port