Order number Material Description Product Details BEKOSPLIT (OIL/ WATER SEPARATOR) SPARE PARTS & ACCESSORIES 4001208 A-BS analy.case compl. 10 mg/l Condensate sample equipment, reference jar 10mg/l 2801178 R-BS filtersack repl.set, large, 5pcs Replacement Filter Set for BEKOSPLIT 3/R-BS filtersack repl.set, small, 5pcs Replacement Filter Set for BEKOSPLIT 11 & 12 OIL/ WATER SEPARATOR SPARE PARTS 4001749 A-OM04 htg. set 110V 1000W f.4,5R,14,15 Heater for WAMAT 4, 5R, 14, 15, (1000 watt) 100-115volt 2801197 R-OM filter set 20 Replacement Filter Set for OWAMAT R-OM filter set UF-superplus 240 PL5 Replacment Filter Set for ultrafilter ultrasep superplus 240 ZERO LOSS ELECTRONIC DRAIN VALVES 4005385 BM12 CO OL 24Vdc NPT V03 BEKOMAT 12, 24 volt DC, NPT con., tyically used in extremely corrisive atomspheres. 4007395 BM12 CO PN63 OL 115Vac NPT FPMcabUSV26 BEKOMAT12, 115 volt NPT con. & w/ plug, tyically used in high pressure applications 4009637 BM12 CO PN63 OL 115Vac NPT FPMcabUSV28 BEKOMAT12, 115 volt NPT con. & w/ plug, tyically used in high pressure applications 4006439 BM12 CO PN63 OL 115Vac NPTstr.USV03PRD$4 BEKOMAT12, 115 volt NPT con. & w/ plug, tyically used in high pressure applications 4004143 BM13 CO PN40 OL 115Vac NPT cabUS V03 BEKOMAT 13, 115 volt NPT con. w/ plug, tyically used in high pressure applications 4009640 BM13 CO PN50 OL 115Vac NPT cabUSV28OEM BEKOMAT 13, 115 volt NPT con. w/ plug, tyically used in high pressure applications 2002387 BM13 OL 115Vac FPM yel V07 BEKOMAT 13, 115 volt, BSP connection 2001122 BM13 OL 230Vac NPT V00 BEKOMAT 13, 230 volt, NPT conection 2002714 BM13 WA 230Vac FPM yel V06 BEKOMAT 13, 230 volt, BSP connection 4009084 BM13 WA CV 115VAC ET NPT cabUS V03 BEKOMAT 13, 115 volt, w/plug, NPT con. used on centrifugal compressors & refrigerant air dryers 4009639 BM13 WA CV 115VAC ET NPTcabUS V28(BEIGE) BEKOMAT 13, 115 volt, w/plug, NPT con. used on centrifugal compressors & refrigerant air dryers 4008763 BM13 WA CV 230VAC NPT ET.V27 +CV BEKOMAT 13, 230 volt, w/plug, NPT con. used on centrifugal compressors & refrigerant air dryers 4009325 BM13 WA CV 24Vdc NPT ET.V27 +CV BEKOMAT 13, 24 volt DC, w/plug, NPT con. used on centrifugal compressors & refrigerant air dryers 2002965 BM14 OL 115Vac DEMO cabUS V03 BEKOMAT 14, 115 volt, NPT con. w/plug 4007964 BM14 OL 115Vac NPT cabUS V26 BEKOMAT 14, 115 volt, NPT con. w/plug 4006574 BM14 WA CV 115Vac NPT ET V03+CV BEKOMAT 14, 115 volt, NPT con. w/plug 4006730 BM14 WA CV 230Vac ET V00 +CV BEKOMAT 14, 230 volt BSP connection, tyically used in high pressure applications 4009643 BM14 WA CV115Vac NPT ETcabUS V28(BEIGE) BEKOMAT 14, 115 volt NPT con. w/ plug, tyically used in high pressure applications 4007394 BM16 CO WA 115Vac NPT cabUS V26 BEKOMAT 16, 115 volt NPT con. w/ plug, tyically used in high pressure applications 4009644 BM16 CO WA 115Vac NPT cabUS V28 BEKOMAT 16, 115 volt NPT con. w/ plug, tyically used in high pressure applications 2000720 BM16 CO WA 230Vac NPT V00 $BEKOMAT 16, 230 volt NPT con, tyically used in high pressure applications 4009645 BM16 CO WA CV 115Vac ET NPT cabUS V28 BEKOMAT 16, 115 volt NPT con. w/ plug, tyically used in high pressure applications 4003058 BM20F1 OL 115Vac ET cabUS V03 BEKOMAT 20, 115 volt, BSP connection, w/plug, w/ filter management 4003054 BM20F1 OL 115Vac ET V00 BEKOMAT 20, 115 volt, BSP connection, w/filter management 4001841 BM20N OL 230Vac V00 BEKOMAT 20, 230 volt, BSP connection 4004292 BM20VP OL 115Vac ET cabUS V03 BEKOMAT 20, 115 volt, NPT with external test and with dry contact - for filter use ONLY 2002251 BM21N OL 115Vac NPT blk/lgy V08 $2i BEKOMAT 21, 115 volt, NPT con. 2002393 BM21N OL 230Vac FPM NPT lbl/lgy V05 $BEKOMAT 21, 230 volt, NPT con. 2002733 BM21N WA 115Vac FPM NPT lbl/lgy V05 BEKOMAT 21, 115 volt, NPT con. 4005487 BM21P OL 24Vdc FPM NPT yel/lgy V07 BEKOMAT 21, 24 volt DC, NPT con. 2003000 BM21P OL 115Vac NPT cabUS str.V03 BEKOMAT 21, 115 volt, NPT con. w/plug 4009649 BM31N BI OL 115Vac N C4-blk-red L20 $i BEKOMAT 31, 115 volt, NPT con. No design shell 4008982 BM31-S S-unit AL-AU-NBR-St-GC1-blu BEKOMAT 31 service unit for BEKO version only 4010803 BM32P SA OL 24Vdc C1-blu D01-hN L10 BEKOMAT 32, 24 volt DC, NPT con. INLINE FILTERS 4002785 CP 06-18-G S040X-G open.cut.mod.DEMO DEMO ONLY 4002960 CP 12-68-N2 M023-S fldr M023SWF, Inline filter assy. with float drain,.01 super fine filter element 4002991 CP 12-68-N2 M023-S open $M023FWC, Inline filter assy. with open port.1 fine filter element 4003493 CP 20-067-N2 M025-F dipi fldr M025FDF, Inline filter assy. with float drain, differential gauge, fine filter elemnt 4002901 CP 20-067-N2 M025-F fldr M025FWF, Inline filter assy. with float drain, fine filter element 4003196 CP 20-067-N2 M025-S +BM20F1 115Vac V03 M025SWT, Inline filter assy, with BEKOMAT 20FM 115 volt, super fine filter 0,01m INLINE REPLACEMENT FILTER ELEMENTS 4002738 R-CP filt.elem 06-21-A (05A) Replacement Activated Carbon.01m filter element. Fits our CLEARPOINT model SR-CP filt.elem 06-21-C (05C) Replacement Coarse 25 m filter element. Fits our CLEARPOINT model SR-CP filt.elem 06-21-G (05G) Replacement General 5 m filter element. Fits our CLEARPOINT model SR-CP filt.elem 06-27-A (06A) Replacement Activated Carbon.01m filter element. Fits our CLEARPOINT model SR-CP filt.elem 06-27-C (06C) Replacement Coarse 25 m filter element. Fits our CLEARPOINT model SR-CP filt.elem 06-27-G (06G) Replacement General 5 m filter element. Fits our CLEARPOINT model SR-CP filt.elem 06-27-N (06N) Replacement Nano.01 m filter element. Fits our CLEARPOINT model SR-CP filt.elem 08-28-A (07A) Replacement Activated Carbon.01m filter element. Fits our CLEARPOINT model SR-CP filt.elem 08-28-G (07G) Replacement General 5 m filter element. Fits our CLEARPOINT model SR-CP filt.elem 08-35-C (10C) Replacement Coarse 25 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 08-35-W (10W) Replacement Separator element. Fits our CLEARPOINT model MR-CP filt.elem 08-39-A (12A) Replacement Activated Carbon.01m filter element. Fits our CLEARPOINT model MR-CP filt.elem 08-39-G (12G) Replacement General 5 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 12-36-A (15A) Replacement Activated Carbon.01m filter element. Fits our CLEARPOINT model MR-CP filt.elem 12-36-W (15W) Replacement Separator element. Fits our CLEARPOINT model MR-CP filt.elem 12-41-G (18G) Replacement General 5 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 12-41-S (18S) Replacement Super Fine.01 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 12-46-S (20S) Replacement Super Fine.01 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 12-56-G (22G) Replacement General 5 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 12-68-S (23S) Replacement Super Fine.01 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 20-067-F (25F) Replacement Fine 1 m filter element. Fits our CLEARPOINT model MR-CP filt.elem 20-067-W (25W) Replacement Separator element. Fits our CLEARPOINT model MR-CP filt.elem 20-089-C (30C) $Replacement Coarse 25 m filter element. Fits our CLEARPOINT model MR-CPF filt.elem 88F 1pc.f.0122,483824 FE088F filter element 1m (fine filter) for Flange filter size models FA483.R-CPF filt.elem 88S 1pc.f.0122,483824 FE088S filter element: 0.01m (super fine filter) for flange filter size models FA483.S-CP filt.elem AC old f.sz100,124 FE081AC Activated Carbon filter element fits old gen. BEKO 4006456 S-CP filt.elem AC old f.sz150 $FE103AC Activated Carbon filter element fits old gen. BEKO 4007191 S-CP filt.elem AC Or.HAN E1-24 FHKAC-24 Activated Carbon filter element. Fits Hankinson E1-S-CP filt.elem AC OR.VAN E200-500 RD$USFE850AC Activated Carbon filter element. Fits Van Air E200-500RD 4001150 S-CP filt.elem AC sz020 FE361AC Activated Carbon filter element. Fits old gen. BEKO housing AS-CP filt.elem AC sz076 FE711AC Activated Carbon filter element. Fits old gen. BEKO housing A076

Technical Data

Net Price Ea. Qty. $72.00 $25.00 $22.50 $191.75 $211.75 $390.2 2
Max. Pressure (psig) Max. Pressure (psig) 232 Max. Pressure (psig) 232
Color blue blue black blue blue black yellow blue yellow blue beige yellow yellow blue blue blue blue beige blue black blue black blue blue blue blue black light blue light blue yellow blue black BEKO Color blue blue blue blue blue Color
Label BEKO neutral neutral BEKO BEKO neutral neutral BEKO neutral BEKO neutral neutral neutral BEKO neutral BEKO BEKO neutral neutral neutral BEKO neutral BEKO BEKO BEKO BEKO neutral neutral neutral neutral BEKO neutral BEKO BEKO Label CLEARPOINT CLEARPOINT CLEARPOINT CLEARPOINT CLEARPOINT Label
Max. Compressor Flow (scfm) 1,300 1,300 1,300 1,300 1,300 2,000 2,000 2,000 2,000 5,400 5,400 8,000 8,000 8,000 50,000 50,000 50,000 50,225 Max. Flow (scfm) at 100 psig 880 Max. Flow (scfm) at 100 psig 1,325
Inlet 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" BSP 1/2" 1/2" BSP 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" BSP 3/4" 3/4" & 1" 3/4" & 1" 3/4" & 1" 3/4" & 1" 1/2" BSP 1/2" BSP 1/2" BSP 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" Inlet 2" 2" 2-1/2" 2-1/2" 2-1/2" Inlet
$133.25 $221.00 $221.00 $221.00 $363.50 $363.50 $166.50 $166.50 $166.50 $195.75 $195.75 $195.75 $195.75 $222.25 $222.25 $259.50 $259.50 $259.50 $450.00 $450.00 $450.00 $479.25 $55.00 $55.00 $50.00 $68.75 $50.00 $50.00 $50.00 $59.00 $65.00 $44.00 $25.50 $61.25 $46.75 $223.50 $223.50 $395.50 $376.50 $449.00 $16.25 $18.75 $18.75 $20.75 $22.50 $22.50 $22.50 $22.50 $25.50 $30.25 $22.50 $37.50 $38.75 $41.25 $28.75 $49.00 $49.00 $60.75 $65.00 $70.25 $76.50 $105.50 $149.50 $192.75 $192.75 $25.00 $41.25 $30.50 $43.00 $12.25 $26.50

20 127

2000990 S-CP filt.elem AC szS-CP filt.elem AC szD045 V02(160mm) 4006556 S-CP filt.elem Or.PNE C-130-25 $US 4006540 S-CP filt.elem P050 X5 sz101 ST 2001470 S-CP filt.elem P050 XA sz101 ST 4006514 S-CP filt.elem WEB Q1S-10HM06-013(10$US 4006515 S-CP filt.elem WEB Q1S-6HM06-013(10)$US4006518 S-CP filt.elem WEB SH0060 $US 4006457 S-CP filt.elem X1 old f.szS-CP filt.elem X1 old f.szS-CP filt.elem X1 OR.VAN E200-500 B $US1701917 S-CP filt.elem X1 szS-CP filt.elem X1 szS-CP filt.elem X1 sz250/S-CP filt.elem X25 szS-CP filt.elem X25 sz030 $1701981 S-CP filt.elem X25 szS-CP filt.elem X25 sz308 $1701938 S-CP filt.elem X5 szS-CP filt.elem X5 szS-CP filt.elem X5 szS-CP filt.elem X5 szS-CP filt.elem X5 szS-CP filt.elem X5 szS-CP filt.elem XA NH3 szS-CP filt.elem XA old f.sz074,S-CP filt.elem XA old f.sz100,S-CP filt.elem XA old f.szS-CP filt.elem XA old f.szS-CP filt.elem XA OR.VAN E200-400 C $US 4006509 S-CP filt.elem XA OR.VAN E200-500 C $US1701955 S-CP filt.elem XA sz020/DS-CP filt.elem XA sz076 MEMBRANE DRYERS 4006051 DM 39-10R-N-55K (08-14RC) VB 4006052 DM 39-15R-N-20K (08-19RA) VB 4006053 DM 39-15R-N-32K (08-19RB) VB 4006054 DM 39-15R-N-55K (08-19RC) VB 4006055 DM 39-25R-N-20K (08-29RA) VB 4006008 DM 39-25R-N-32K (08-29RB) VB 4005386 DM 50-22CG-G- cut.mod.DEMO VB 4006056 DM 50-29CG-N3/8-20K (10-41CA) VB 4006060 DM 50-35CG-N3/8-32K (10-47CB) VB 4006062 DM 70-34CG-N-20K (20-48CA) VB 4006065 DM 70-39CG-N-20K (20-53CA) VB $4006066 DM 70-39CG-N-32K (20-53CB) VB 4006002 DM 70-39CG-N-55K (20-53CC) VB 4007089 DM 70-39P2-N1-55K (25-57CC-2) VB 4006018 DM 70-46CG-N-32K (20-60CB) VB 4007626 DMP 39-25-G-20K (08-34KA-N) VB $4008297 DMP 50-35-N3/8-20K (10-47CA-N) VB 4008460 DMP 70-39-N-20K (20-53CA-N) VB $4010666 DMP 70-53-N-20K (20-67CA-N) VB MEASUREMENT DEVICES 4009883 MFM flow meter SD 6001 NPT SD8001 MFM flow meter SD 8001 NPTMLD leak detector cpl. BEKO 4007093 MLD-A telesc.extens.f.leak det.BEKO $1i

FE811AC Activated Carbon filter element. Fits old gen. BEKO housing A105 FE001AC Activated Carbon filter element. Fits old gen. BEKO duplex filter housing D045 6CU25-130 coalescing filter element. Fits Pneumatech C-130-25 FE730Xm High Pressure coalescing filter element. Fits old gen. BEKO housing HPS101 FE730XA 0.01 m High Pressure coalescing filter element. Fits old gen. BEKO housing HPS101 F22D 0.3 m coalescing filter element. Fits BEKO housing F22D02A F22E 0.01 m coalescing filter element. Fits BEKO housing F22E02A SE0060E 0.01 m coalescing filter element. Fits BEKO housing SH0060 FE103X1 0.1 m coalescing filter element. Fits BEKO housing 150 FE123X1 0.1 m coalescing filter element. Fits BEKO housing 200 FE850X1 0.1 m coalescing filter element. Fits Van Air housing E200-500B FE361X1 0.1 m coalescing filter element. Fits BEKO housing A020 FE851X1 0.1 m coalescing filter element. Fits BEKO housing A205 FE951X1 0.1 m coalescing filter element. Fits BEKO housing A250/305 FE361Xm coalescing filter element. Fits BEKO housing A020 FE371Xm coalescing filter element. Fits BEKO housing A030 FE711Xm coalescing filter element. Fits BEKO housing A076 FE981Xm coalescing filter element. Fits BEKO housing A308 FE361Xm coalescing filter element. Fits BEKO housing A020 FE371Xm coalescing filter element. Fits BEKO housing A030 FE731Xm coalescing filter element. Fits BEKO housing A106 FE851Xm coalescing filter element. Fits BEKO housing A205 FE961Xm coalescing filter element. Fits BEKO housing A306 FE981Xm coalescing filter element. Fits BEKO housing A308 FE87XANH3 0.01m coalescing filter element. Fits A8710 version NH3 (FOR AMMONIA GAS) FE071XA 0.01 m coalescing filter element. Fits BEKO housing 74/75 FE081XA 0.01 m coalescing filter element. Fits BEKO housing 100/124 FE073XA 0.01 m coalescing filter element. Fits BEKO housing 101 FE103XA 0.01 m coalescing filter element. Fits BEKO housing 150 FE832XA 0.01 m coalescing filter element. Fits Van Air E200-350C & E200-400C FE850XA 0.01 m coalescing filter element. Fits Van Air E200-500C FE361X1 0.01 m coalescing filter element. Fits BEKO housing A020 FE711X1 0.01 m coalescing filter element. Fits BEKO housing A076 Membrane dryer DM08N14RC tube version Membrane dryer DM08N19RA tube version Membrane dryer DM08N19RB tube version Membrane dryer DM08N19RC tube version Membrane dryer DM08N29RA tube version Membrane dryer DM08N29RB tube version DEMO ONLY Membrane dryer DM10N41CA Membrane dryer DM10N41CB Membrane dryer DM20N48CA Membrane dryer DM20N53CA Membrane dryer DM20N53CB Membrane dryer DM20N53CC Membrane dryer DM25N57CC-P2 Parrallel Unit Membrane dryer DM20N60CB Membrane dryer DM08G34KA-N w/ intergated Nano filter Membrane dryer DM20N47CA-N w/ intergated Nano filter Membrane dryer DM20N53CA-N w/ intergated Nano filter Membrane dryer DM20N67CA-N w/ intergated Nano filter Flow and consumption measuring unit, measuring range up to 53 scfm Flow and consumption measuring unit, measuring range up to 158 scfm Leak detector with analog display in case complete with battery 9V, ultrasonic probe and head phones. Telescopic rod for LEAK DETECTOR, 2 x 8 feet. Made of Aluminum

232 Operating Pressure 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig Max. Pressure (psig)

675 1,300 1,530

Inlet (scfm) 0.42 1.47 0.84 0.85 2.34 2.53 4.41 3.81 8.82 11.80 10.70 7.95 15.89 16.40 2.34 5.88 11.80 21.20 Color orange orange blue
Outlet (scfm) 0.32 1.12 0.66 0.67 2.24 2.01 3.36 3.01 6.73 8.00 8.40 6.36 12.71 12.90 2.24 4.48 8.00 15.90 Label neutral neutral BEKO
Outlet (PDP) based on 100F inlet 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F Max. Flow (scfm) at 100 psig 53 158
$30.50 $18.50 $20.33 $67.75 $67.75 $13.50 $13.50 $23.75 $41.25 $46.25 $43.00 $12.25 $59.25 $69.50 $12.25 $14.75 $26.50 $110.00 $12.25 $14.75 $35.25 $59.25 $90.25 $110.00 $373.75 $22.50 $25.00 $32.50 $41.25 $41.25 $43.00 $12.25 $26.50 $121.25 $138.50 $138.50 $138.50 $174.50 $174.50 $58.75 $201.25 3/8" $201.25 3/8" $275.75 3/4" $307.75 3/4" $307.75 3/4" $307.75 3/4" $590.00 1" $342.25 3/4" 1/4" BSP $202.50 $276.00 3/8" $359.75 3/4" $446.25 3/4" Inlet $296.75 1/2" $325.75 1" $544.50 $90.75 Inlet 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

Automatic washing machine WME 8227 W
Please read this manual first!
Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
This operation manual will
help you use your machine in a fast and safe way. Please read the Operation Manual before installing and starting your machine. Particularly follow the instructions related to safety. Keep this Operating Manual within easy reach. You may need it in the future. Please read all additional documents supplied with this machine. Please note that this Operating Manual may be applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this Operation Manual the following symbols are used: C Important information or useful hints about usage. A Warning for hazardous situations with regard to life and property. B Warning for supply voltage.
2820520948_EN/200409.1114
This appliances packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

TABLE OF CONTENTS

1 Your Washing Machine 4
Overview . 4 Specifications. 5 Spin Speed selection. 18 Programme selection and consumption table. 19 Auxiliary functions. 20 Time screen. 20 Starting the programme. 21 Progress of programme. 21 Changing the selections after the programme has started . 22 Child/key lock. 22 Ending the programme through cancelling. 23 Programme in rinse hold mode. 23 End of programme. 23

2 Warnings

General Safety. 6 First Use. 6 Intended use . 6 Safety instructions . 6 If there are children in your house. . 7 Electrical connection. 7

3 Installation

Removing packaging reinforcement. 9 Opening the transportation locks . 9 Appropriate installation location . 9 Adjusting the feet. 9 Connecting to the water supply. 10 Connecting to the drain . 10 Electrical connection . 11 Destroying the packaging material . 11 Disposing of the old machine. 11
6 Quick instructions for daily use Cleaning and care 26
Detergent drawer. 26 The door and the drum. 26 Outer cabinet and control panel. 26 Inlet water filters. 26 Draining any remaining water and 4 Initial preparations for washing cleaning the pump filter . 27
Sorting the laundry. 12 Preparing clothes for washing. 12 Correct load capacity. 12 Loading door. 13 Detergents and softeners. 13
8 Solution suggestions for problems 9 Guarantee 10 Service
5 Selecting a programme and operating your machine 15
Control panel. 15 Display symbols. 16 Turning the machine on . 16 Programme selection. 16 Additional programmes. 17 Special programs. 17 Temperature selection . 18 3

1 Your Washing Machine

Overview
1 - Detergent Drawer 2 - Door 3 - Top Lid
4 - Control Panel 5 - Filter Cap 6 - Height-adjustable feet

Specifications

Models Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (kg) Electricity (V/Hz.) Total Current (A) Total Power (W) Spinning cycle (rpm max.)

WME8227W V / 50Hz 1200

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.
Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void. may be caused by the software. Press Start/Pause/Cancel button for 3 seconds to cancel the program set in your machine before calling the authorized service.

General Safety

Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below your machine may cause electrical parts to overheat. This may cause problems with your washing machine. If the power cable or mains plug is damaged you must call Authorized Service for repair. Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry. Fit the drain hose into the waste water system securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned. Your washing machine is designed to continue operating when the power restores after a power interruption. You cannot cancel any program by pressing the On/Off button. The machine will resume its program when the power restores. Press the Start/Pause/Cancel button for 3 seconds to cancel the program (See, Cancelling a Program) There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine. Some problems you may encounter 6

2. Remove transportation safety bolts by turning them gently.

Adjusting the feet

C Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged. 1. Manually (by hand) loosen the lock nuts on the feet. 2. Adjust them until the machine stands level and firm. 3. Important: Tighten all lock nuts up again. 9
Connecting to the water supply.
Important: The water supply pressure required to run the machine must be 1-10 bar (0,MPa). (Practically, it is necessary to have liters of water flowing from the tap in one minute to have your machine run smoothly.) Attach a pressurereducing valve if the water pressure is higher. Connect the special hose supplied with the machine to the water intake valves on the machine.
Open the taps completely after making the hose connection to check if there is any water leakage at the connection points. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use.
Models with a single water inlet should not be connected to the hot water tap. Laundry may be damaged or the appliance may switch to protection mode and not work. When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.

Connecting to the drain

In order to prevent water leakage that may occur at the connection points, there are rubber seals (4 seals for the models with double water inlet and 2 seals for other models) attached to the hoses. These seals should be used at the tap and machine connection ends of the hoses. The plain end of the hose fitted with a filter must be attached to the tap and the elbowed end must be attached to the machine. Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts. 10
The water discharge hose can be attached to the edge of a washbasin or waste water system. The drain hose should be firmly fitted into the drain as to not loosen in its housing. Important: The end of the drain hose can be directly connected to the wastewater drain or to the washbasin. The fitting must be secured in all types of connections. Your house may be flooded if the hose falls out of its housing during water discharging. The hose should be attached to a height of at least 40 cm, and 100 cm at most.
In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out wet. Therefore, the heights described in the figure should be followed. To prevent dirty water refilling the machine, and to allow for easy discharge, the end of the hose must not be submerged in the drain water. The end of the hose must be able to take in air. The hose should be pushed into the drainage for more than 15 cm. If it is too long you may have it shortened. The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the machine. The length of the hose is too short, you may add an extension hose to the original section. The length of the hose must not be longer than 3.2 m after coming out of the machine. To avoid water leakage failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Loading door

The door is locked during program operation. The door can be opened after some time following the program end. Open the door. Place laundry items loosely in the machine. Push the door until it clicks into place tightly. Ensure that no items are caught in the door.

Detergents and softeners

Detergent drawer The detergent drawer is composed of three compartments: The detergent dispenser may be in two different types according to the model of your machine. - (I) for prewash - (II) for main wash - (III) siphon ( ) for softener
for prewashing for main washing with hard water
Detergent quantity 1/2 measure 1 measure an additional 1/2 measure
follow the instructions on the package.
Softener Put the softener into the softener compartment of the detergent dispenser. Use the proportions recommended on the packet. Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used. If the softener has lost its fluidity, dilute dense softener with water before placing it in the detergent drawer. Liquid detergent When using liquid or gel washing detergents, please note the following: The liquid detergent may leave stains on your laundry if time delay feature is selected. Do not use liquid detergent if you want to wash using the time delay feature. Do not use liquid detergent for the main wash in a cycle with pre-wash. Use the detergent manufacturers measuring cup and follow the instructions on the package. Starch Add liquid starch, powder starch or the fabric dye into the softener compartment as instructed on the package. Never use fabric softener and starch together in the same washing cycle. Wipe the inside of the drum after using starch. Eliminating lime formation When required, use only appropriate lime removers developed specifically for washing machines and always 14
5 Selecting a programme and operating your machine

Control panel

Figure 1
1 - Spin Speed Adjustment Button 2 - Display 3 - Temperature Adjustment Button 4 - Programme Selection Knob 5 - On / Off Button 6 - Time Delaying Button (+/-) 7 - Auxiliary Function Buttons 8 - Start/Pause/Cancel Button

Display symbols

Figure 2
button (Figure 1-8) to start the programme.
2.a - Spin Speed Indicator 2.b Temperature Indicator 2.c Spinning Symbol 2.d Temperature Symbol 2.e Remaining Time and Delaying Time Indicator 2.f Programme Indicator Symbols (prewash/mainwash/rinsing/softener/ spinning) 2.g Economy Symbol 2.h Time Delaying Symbol 2.i Door Locked Symbol 2.j Start Symbol 2.k Pause Symbol 2.l Auxiliary Function Symbols

Main programmes Depending on the type of textile, the following main programs are available: Each of these main programs comprise of a complete washing process, including washing, rinsing and, if required, spin cycles. C Sort the laundry according to type of fabric, color, degree of soiling and permissible water temperature while choosing a programme. C Always select the lowest required temperature. Higher temperature means higher power consumption. C For further programme details, see Programme Selection Table Cottons You can wash your durable clothes at this programme. Your laundry shall be washed with intense washing movements during a longer washing cycle. It is recommended for your cotton clothes (such as bed sheets, duvet and pillowcase sets, bathrobes, underclothing, etc.). Synthetics You can wash your less durable clothes at this programme. Lighter washing movements and shorter washing cycle is used compared to Cottons programme. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and veils, it is recommended to use Synthetic 40C programme with prewash and anti-creasing functions selected. Detergent should not be put in the prewash compartEN

Turning the machine on

Plug in your machine. Turn the tap on completely. Check if the hoses are connected tightly. Place the laundry in the machine. Put in detergent and softener. Press the On/Off button (Figure 1-5).

Programme selection

Select the appropriate programme from the programme table according to type, amount and soiling degree of the laundry and washing temperatures. Bring the Programme Selection Knob (Figure 1-4) to the programme mode that you wish to wash your laundry at. The recommended temperature and spin speed for the selected programme appear. Press Start/Pause/Cancel 16
ment. Less detergent should be put in the main wash compartment as the veil foams too much because of its meshed structure. Woollens You can wash your machine-washable woollen garments at this programme. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens.

Additional programmes

you to use liquid detergent or woolen shampoo for dark coloured laundry. Mixed Fabrics You can use this program to wash cottons and synthetics together without needing to sort them. Duvet You can also wash your machinewashable fiber duvets with this program. C You must not load more than 1 piece of fiber duvet for two persons.

For special cases, there are also extra programs available: C Additional programs may differ according to the model of your machine. Baby+Toddler Clothing Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people. Hand Wash You can wash your woollen/delicate clothes that bear not machinewashable labels for which hand wash is recommended at this programme. It washes the laundry with very tender washing movements without wearing your clothes out. Daily Quick This programme is used to quickly wash a small number of lightly soiled cotton garments. E.g.: bathrobes, duvet covers, sport wears, daily clothes and etc. used only once. A Class 40 This programme washes for a longer period at 40C and gives the same result as the Cottons 60C programme, thus it saves energy. It is suitable for clothes for which you cannot use the Cotton 60C programme. Darkcare Use this programme to wash your dark coloured laundry, or the coloured laundry that you do not want them get faded. This programme washes your laundry with low mechanical movements and at low temperature. We recommend 17
Economy symbol Shows energy saving programs and temperature selections. As Intensive and Baby programs are long programs with higher temperature selections to ensure hygiene, Economy Symbol (Figure 2-2g) will not light up.

Special programs

For specific applications, you can select any of the following programs: Rinse This programme is used when you want to rinse or starch separately.
Spin+Drain This program is used to apply an additional spin cycle for the laundry or to drain the water in the machine. Before starting this program, select the desired spin sped and press Start/ Pause/Cancel button. Your machine drains the water after spinning at the set spin speed. If you only want to drain the water without spinning your laundry, select Spin and drain program, and then select no spin function with spin speed selection button. Press Start/Pause/ Cancel button. A You should use a lower spin speed for delicate laundries.

Normally soiled, fade proof colored linens, cottons or synthetic clothes (Ex.: shirts, nightgowns, pajamas) and lightly soiled white linen clothes (Ex.: underwear) For delicate clothes (Ex.: veil curtains), blended clothes including synthetics and woolens.

40C 30C Cold

Spin Speed selection

Temperature selection

Whenever a new programme is selected, the temperature anticipated for that programme appears on the temperature indicator (2b). To change the temperature, press the temperature button (Figure 1-3).
Whenever a new programme is selected, the maximum spin speed of the selected programme is displayed on the spin speed indicator (Figure 2-2a). To decrease the spin speed, press the Spin button (Figure 1-1). Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively. Rinse hold is shown with and no spin is shown with symbols.
Temperature falls with 10 decrements. Cold selection is shown with - symbol. When the Temperature button is pressed after coming to the Cold selection, the maximum temperature of the programme you have selected will be displayed. To decrease the temperature, press the Temperature button again. 90C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets)
If you do not want to unload your clothes immediately after the programme, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function: - Adjust the spin speed. - Press Start/Pause/Cancel Button. Programme resumes. Your machines drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the programme.
Programme selection and consumption table
EN 2 Spin speed (rpm) Water Consumption (l) Energy Consumption (kWh) Max. Load (kg) Auxiliary functions

Temperature

Programme
Prewash Quick Wash Extra Rinse Anti- Crease Plus water Rinse Hold
Selectable temperature range C 90-Cold 90-Cold 90-Cold 60-40 90-60-Cold 60-Cold 40-Cold 40-Cold 40-Cold 30-Cold
Cottons Cottons Cottons Duvet Baby&Toddler Clothing A Class 40 Synthetics Synthetics Mixed Fabrics Darkcare Woollens Hand Wash Daily Quick Daily Quick Daily Quick
2.70 1.36 0.75 0.60 2.70 1.20 1.00 0.52 0.62 0.60 0.30 0.25 2.00 1.15 0.20
max. max. max. 800 max. max. *

60** 8

1000 1000 1000 600 max. *** max. *** max. *** *

30 1.80

90-Cold 90-Cold 90-Cold
Selectable * Automatically selected, not cancellable. ** Energy Label programme (EN 60456) *** : Refers to 1400 rpm in machines with a highest spin speed above 1400 rpm. Refers to the highest spin speed in machines with a highest spin speed below 1400 rpm. Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage. Super 40 programme may be selected instead of Cotton 60 programme during A Class 40 winter in areas where the input water temperature is low and/or in areas with low supply voltage. C The auxiliary functions in the table may differ according to the model of your machine. C Programme duration will be displayed on the screen of your machine according to your selection. 19 EN

Auxiliary functions

Auxiliary function selection keys
Depending on the programme, you can select the desired auxiliary function by pressing the buttons. Select the required auxiliary functions before starting the programme. Some combinations cannot be selected together. (Ex.: Prewash and Quick Wash. Symbol of the selected auxiliary function (Figure 2-2l) will light up. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. (Ex.: If you want to select prewash first and then quick wash, prewash will be cancelled and quick wash will remain active. Auxiliary function that is not compatible with the programme cannot be selected. (see, Programme Selection Table) Prewash When you select this function, the display will indicate F1 symbol. A prewash is only required with heavily soiled laundry. Without prewash you save energy, water, detergent and time. Prewash without detergent is recommended for veils and curtains. Quick Wash With this programme, the wash time is 20
shortened. F2 symbol will light up on the display. Use this function for smaller amounts or slightly soiled laundries. Extra Rinse This function allows your machine to perform an extra rinsing in addition to the rinsing cycles performed by your machine after main washing cycle. Thus, the risk for sensitive skins (babies, allergic skins and etc.) to be effected by the minimal detergent remnants on the laundry is reduced. F3 symbol will light up on the display. Anti- Crease With this function, boiler movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. F4 symbol will light up on the display. Use this function for delicate laundries that crease easily. C Whenever you select this auxiliary function, load your machine with half of the maximum laundry amount specified in the programme table.

Starting the programme

1. Press Start/Pause/Cancel button (Figure 1-8) to start the programme. 2. The start symbol (Figure 2-2j) which indicates that the programme has started will light up. 3. The door locks and the door locked symbol (Figure 2-2i) will light up. 4. Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the programme has started from will light up (Figure 2-2f).

Progress of programme.

The progress of a running programme is shown through a number of symbols on the screen. At the beginning of each programme step, the relevant symbol in the series of symbols will light up and thus, at the end of the programme, all symbols will remain lit up. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out. Prewash When Prewash auxiliary function is selected, prewash symbol will light up to indicate the beginning of prewash step. Main wash Main wash symbol will light up to indicate that the main wash cycle has started. Rinse Rinse symbol lights up at the beginning of the rinse step.
Softener Softener symbol lights up at the beginning of softener step. Spin Spin symbol will light up at the beginning of the final spin, during Spin and Pump special programs. If the machine is not spinning, the programme may be in rinse hold mode or the automatic spin correction system has been activated because of the excessive unbalanced distribution of the laundry in the machine.
Adding/taking out laundry in standby mode The door can be opened if the water level is suitable. The door locked symbol (Figure 2-2i) will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door. Door lock Door Locked Symbol (Figure 2-2i) lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out.

6 Quick instructions for daily use
Preparation 1. Turn the tap on completely. Check that the hose is connected tightly. 2. Place the laundry in the machine. 3. Add detergent and softener. Starting 1. Press the On/Off button. 2. Select the programme and the temperature. 3. If desired (according to your machines model): select any auxiliary function, adjust the spin speed, set the time delay, 4. Close the loading door. 5. Press Start/Pause/Cancel button. The display shows the time remaining for the programme to complete if time delay is not set. The display shows the time remaining for the programme to start if the time delay is set. 6. Check if the Door Locked Symbol lights up on the screen. The Door Locked Symbol (Figure 3-2i) will light up if time delay is not set. The Door Locked Symbol (Figure 3-2i) will fade if time delay is set. Cancelling a programme 1. Press and hold the Start/Pause/ Cancel button for about 3 seconds; the Start symbol will start flashing. 2. The machine can discharge all the water or can take in water for 3 times at most to cool down the clothes and complete discharging process. Adding more laundry This is only possible under the following conditions: during time delay, C You may add or remove laundry during the time delay (until the 1. 2. 3. 4. programme starts). At the beginning of a washing cycle (machine allows adding more laundry during a future step only if the water level is low enough to open the loading door or if the temperature in the machine is low). In order to add laundry after the start-up of the programme: Press Start/Pause/Cancel button. Open the loading door and put in more laundry. Close the loading door. Press Start/Pause/Cancel button.
Programme is in rinse hold mode C This process is shown with the flashing spin symbol and the standby symbol which is lit up. If you wish to spin when the machine is in this mode: 1. Adjust the spin speed. 2. Press Start/Pause/Cancel button. The programme continues, pumps out the water and spins. 3. The standby symbol fades out and the start symbol lights up. If you want to discharge the water without spinning: 1. Press Start/Pause/Cancel button. 2. The standby symbol fades out and the start symbol lights up. 3. The programme continues and only pumps out the water. Re-spinning the laundry The control system for an unbalanced load can pause the spinning in cases when the distribution of the laundry in the drum is not balanced. If you want to re-spin the clothes: 1. Distribute the laundry in your machine for a balanced load. 2. Select the spin programme. 3. Adjust the spin speed.

After the programme is finished Programme indicator symbols on the screen will remain lit after the programme is finished. End will appear on the screen. 1. Open the loading door and take out the laundry when the door locked symbol on the display fades out. 2. Press the On/Off button. 3. Turn the water tap off. 4. Remove any folds in the rubber seal on the loading door and check for debris. 5. Leave the loading door and detergent drawer open to dry.

7 Cleaning and care

Detergent drawer
Remove any powder residue buildup in the drawer. To do this; 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. C Foreign metal substances in your machine can cause rust stains. In such cases: Clean the drum with a stainless steel cleaning agent. Never use steel wool or wire wool.
Outer cabinet and control panel
C If more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. 2. Wash the dispenser drawer and the siphon with plenty of lukewarm water in a washbasin. Wear protective gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning. 3. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location.
When necessary: Wipe the exterior panels of your machine with soapy water or mild detergent. Dry it with a soft cloth. Use only a soft and damp cloth to clean the control panel. C Never use a sponge or scrubbing material. These will damage the painted and plastic parts.

Inlet water filters

There is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty. Close the taps.

The door and the drum

After each wash: Check if there are any foreign substances in the drum. Open the hole in the bellow with the aid of a toothpick if it is clogged.
Remove the nuts of the water intake hoses to clean the surfaces of the filters on the water intake valves with an appropriate brush. 26
If the filters are very dirty, you can pull them out by means of pliers and clean them. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water. Replace the gaskets and filters carefully and tighten the hose nuts by hand.
3- An emergency drain hose is supplied with some of our models. Others are not supplied with this item. If your product is supplied with an emergency drain hose, do the following as shown in the figure below:

- There may be an imbalance of laundry in the machine. Therefore, the program might have been completed without spinning. - The machine will not spin if the water has not completely drained.
Washing performance is poor: Laundry turns grey - Using insufficient amount of deter- Use the recommended amount of detergent apgent for a long time, propriate for water hardness and the laundry. - Washing at low temperatures for a - Select the proper temperature for the laundry to long time, be washed. - Using insufficient amount of deter- If the water hardness is high, using an insufficient gent for hard waters (soil can stick to amount of detergent can cause laundry to turn the laundry), grey over time. - Using excessive amount of detergent - It is difficult to eliminate such greyness once it (detergent can stick to the laundry). occurs. Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not be whitened. - Insufficient amount of detergent used. - Use recommended amount of detergent appro- Excessive laundry loaded into mapriate for the laundry. chine - Do not load the machine in excess. - Wrong program and temperature - Select the proper program and temperature for might have been selected. the laundry to be washed. - Improper detergent may have been - Put the detergent in the correct compartment. used. - Do not mix detergent with bleaching agents. - Wrong type of detergent used.
- Washing performance is poor: Oily stains appear on laundry. - Washing performance is poor: Bad odour - Such odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short programs. - Leave the detergent dispenser drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot be created inside the machine. - Machine must be operated empty either at 60C or 90C program with detergent every 6 months. - Do not load the machine in excess - Store detergent in a closed and dry location. - Do not keep them under high temperatures. - Select the proper program and temperature according to the type and soiling degree of the laundry.
- Oily accumulations on the drum may have stuck to the laundry. - Oily accumulations on the drum may have stuck to the laundry.
Colour of the clothes faded. - Excessive laundry loaded into machine. - Detergent may have gotten damp. - A higher temperature might have been selected. It does not rinse well. - Store detergent in a closed and dry location. Do not keep them under high temperatures. - If detergent is put in the prewash compartment although prewash cycle is not selected, machine - The amount, brand and storage con- can take this detergent during rinsing or softener ditions of the detergent used might not step. be appropriate. - Check the filter. - Detergent might have been put in the - Check the drain hose. wrong compartment. - There may be an imbalance of laundry in the - Machine filter may be clogged. machine. - Drain hose may be folded. - The laundry in the drum may be clustered (bun- Intermediate spins may be skipped. dled laundry in a bag). Laundry should be rearranged and re-spun. - No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment. Clothes stiffened. - If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of - Insufficient amount of detergent used. detergent according to the water hardness. - The detergent may have been placed - If detergent is put in the prewash compartment into the wrong compartment; the although prewash cycle is not selected, machine detergent may be mixed with the soft- can take this detergent during rinsing or softener ener. step. - Do not mix the softener with detergent when putting in the compartment. - Wash and clean the drawer with hot water.

Machine does work. Nothing is displayed on the screen. The plug might not be plugged in the mains outlet. Check the plug. Fuse may have blown. Check the fuse. Electricity may be cut off. Check the supply power. The On/Off button might have not Press this button. been pressed. The machine did not start after the program was selected and the Start/Pause/Cancel button was pressed. The front door may be ajar. The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water cut-off symbol may light up too) Water may have been cut off. You can restart your machine by pressing the Start/Pause/Cancel button for a short time after ensuring that the water is not cut off.

9 Guarantee

Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? Repairs necessary as a result of faulty materials, defective components or manufacturing defect. The cost of functional replacement parts, but excluding consumable items. The labour costs of a Beko approved repairer to carry out the repair. What is not covered? Transit, delivery or accidental damage or misuse and abuse. Cabinet or appearance parts, including knobs, flaps, handles or container lids. Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets, filters and light bulbs. Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book. Repairs to products used on commercial or non-residential household premises. Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included within your household contents insurance policy, or may be available separately from your retailer). Important notes. Your Beko product is designed and built for domestic household use only. The guarantee will be void if the product is installed or used in commercial or non-residential 35
domestic household premises. The product must be correctly installed, located and operated in accordance with the instructions contained in the User Instructions Booklet provided. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers Gas Cookers must only be installed by a CORGI (or BORD GAIS) registered Gas Installer. The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland. The guarantee is applicable only to new products and is not transferable if the product is resold. Beko disclaims any liability for incidental or consequential damages. The guarantee does not in anyway diminish your statutory or legal rights. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 4911 e-mail:service@beko.co.uk