installation & operating Automatic instructions and washing guidance washing machine

WMA 510 S WMA 510 W

Due to the quality control processes applied to your machine during production, there may be some water left in your machine. This does not cause any damage. Note that temperatures in this book are for guidance only. Always check the clothing labels before selecting your wash programme.
Recycling: This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

contents

Introduction

Welcome 2

Installation
Know your washing machine/specification Location Installation Electrical connection 5 7

Operating

How to use Programme descriptions Function buttons ITCL fabric care symbols 8 12-13

Machine care

Care & maintenance Before calling service/troubleshooting Guarantee Service 17 17
know your washing machine

Top lid

Synthetics 30 Cold Delicates 30 Cold Woollens Cold Cottons Start / Pause Cancel Prewash Rinse Ho ld Extra Rinse On/Off A Class 40 Mini 30 Hand Wash Rinse Spin+Drai n Ready Wash Spin/End

Front Door

Handle
Pump filter cover Kick plate Adjustable feet Programme Selection knob
Synthetics 30 Cold Delicates 30 Cold Woollens Cold Cottons Start / Pause Cancel Prewash Rinse Hold Extra Rinse On/Off
Start/Pause/Cancel button
Auxillary Function buttons
A Class 40 Mini 30 Hand Wash Rinse Spin+Drain Ready Wash Spin/End
Detergent and softener drawer
Program progress indicator lights

On/Off button

specification
Capacity (dry fabric) 5kg 60cm x 54cm x 85cm Net weight Supply voltage Nominal current Motor power Heater power Washing speed Spin speed (max.) 62kg 230V~ 50Hz 10A 300 watts 2050 watts 52 rpm 1000 rpm
Dimensions width x depth x height
Because we continually strive to improve our products, we may change our specifications and designs without prior notice.

location

You can locate the washing machine anywhere (except bathrooms, showers and away from rain, damp places and water) as long as you have a cold water supply, drainage and electrical connection alongside. Ensure there is clearance each side of the machine to allow slight side ways movement during washing and spin drying.

Attention!

In addition to this, washing machines should not be installed on carpet, foam backed laminate, or parquet flooring where the nature of these types of flooring can also contribute to the inefficient operation of the washing machine on the spin cycle.
Never place your machine on a carpet. This prevents air circulation. The electrical components of the machine may overheat and may cause damage. Please ensure the power, water supplies and waste are suitable, if in doubt, consult a qualified plumber or electrician. Different methods of floor construction can result in an increase in vibration/noise during spin modes. If these symptoms are experienced please ensure firstly that all four feet are in firm contact with the floor to minimise any out of balance vibration which may be generated. Additional information is available by request.

installation

Removing transport safety bolts
The transport safety bolts must be removed before any operation of the machine. 1 Turn the bolt heads C anti-clockwise until the bolt can be partially withdrawn. 2 Remove them and the rubber bushes by pulling outwards. An up/down action and a small squirt of washing up liquid will ease removal. 3 Plastic plugs, supplied inside the protective bag, designated P, should be placed in the safety bolt holes as shown.
Attention! Keep the safety bolts for future transportation and reinstate them before transporting your machine. Never transport your machine without the transport bolts in position. Any resultant damage is not covered by the warranty.

Feet adjustment

To ensure quiet and stable operation, the machine should be positioned correctly and leveled. If the machine is unstable, adjust feet by loosening the plastic lock nut and screwing or unscrewing the feet until the machine is level. After positioning, tighten the lock nut.
Sy nt etcs h i 30 Cold Delicates 30 Cold Woo lens 60 Cotton s 40 Cold Start / P ause Cancel Prewash Rinse Hol d Ex t a r Rinse On/Off A Clas 40 s Mini 30 Hand Wash Rinse Sp i + Dr n ain Ready Wash Sp i /En d n

Water inlet connection

Your machine comes with cold water connection only. Connect the cold water using the hose with blue printing or colour.

Cold water supply

For proper operation, the pressure of cold water should be between 1 and 10 bars. (1 bar corresponds to more than 8 litres per minute flow rate with a fully open tap.) To prevent water leaks, sealing washers are supplied with the water inlet hose inside the machine. Place these on the hose end and tighten both ends fully. In order to prevent any water leakage and damage, turn off the water tap when not in use. Connect the right angled end of the hose to the machine water inlet. The washing machine must only be connected with the new hose provided and old hoses must not be reused.

Drain hose

The drain hose should be placed and secured either at the side of the sink A, directly to the drain B or directly to the waste water inlet C. The hose should not be bent. Using method A, the drain hose should be secured with the elbow so that it can not be dislodged. The waste pipe must only be connected into the foul drains and not surface water drainage system. The hose should be placed between 20 and 80cm from the floor level and must not be extended otherwise the machine may not empty the waste water. The minimum diameter of any external pipe must be 32 mm.

electrical connection

Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you use your machine as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation.

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: 1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked E or with the symbol or coloured green and yellow or green. 2 Connect the blue (neutral) wire to the terminal in the plug marked N or coloured black. 3 Connect the brown (live) wire to the terminal in the plug marked L or coloured red. With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. Green and yellow or green

Important

Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Beko Authorised Service Agent.
Warning This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store. In order to avoid hazards, damaged supply cord should be replaced by the manufacturer, its service agent or similarly qualified people.

Blue or black

Brown or red

how to use

Sorting laundry
Sort the laundry according to the following groups and wash them separately: White and colour fast fabrics Non-fast, coloured fabrics Delicate fabrics (silk, rayon etc.) Woollens Hand knits should be placed inside out in the machine. Be sure to empty pockets and remove any belts, buckles, pins, etc. from the clothing. Never exceed the maximum load of the selected programme (see page 13)

Programme selection

Select the programme after referring to the programme descriptions and table on page 12-13. Warning! Always switch on the machine before selecting your wash programme. Turn the programme selection knob to the desired programme. You have now selected both the washing programme and the washing temperature at the same time.
Programme selection indicator
Synthetics 30 Cold Delicates 30 Cold Woollens 40

40 Cold Cottons

A Class 40 Mini 30 Hand Wash Rinse Spin+Drain

Loading the machine

Make sure power button is off. 1 Pull the door handle. 2 Place the fabrics uniformly inside the machine. Make sure that there is no clothing obstructing the door. 3 Close the door by pushing lightly. If the door does not close completely, the machine will not start. This is a safety precaution. The front door is locked until the end of the washing programme and it cannot be opened for about 2 minutes following the end of the programme.

Function selection

Start / Pause Cancel Prewash Rinse Hold Extra Rinse On/Off

Spin/End

Select the desired auxiliary function such as Rinse Hold, Extra Rinse, etc. before you push the Start/Pause/Cancel button. Indicator light of the function selected will be on. Door will be locked after pressing Start/Pause/Cancel button. To cancel the selected function, press Start/Pause/Cancel button. Your machine will pause. Any auxiliary function button can be selected now if needed, see page 13. You have to start the programme by repressing the Start/Pause/Cancel.
Detergent and softener dispenser
1 Open the drawer. 2 Put powder detergent and the fabric softener in the compartments as shown. 3 Close the detergent and softener drawer.

Starting

Start / Pause Cancel 3h 6h 9h Time Delay Prewash Rinse Hold Extra Rinse On/Off
for fabric softener Detergent compartment II for wash cycle
Syphon Detergent compartment I for prewash cycle

Powders and liquids

The performance of the washing machine depends on the effectiveness of the detergent. Stains can remain if low quality detergents are used. Only use powders specific for automatic washers, otherwise over foaming and poor washing performance will be experienced. Do not use liquid detergent in your detergent drawer. Only use liquid detergents with a dosing ball. Do not attempt to use detergents and bleaching agents that contain chlorine and sulphur. Concentrated softener may clog the syphon, in this case add some water to the softener liquid.

Before any operation of the machine check the following: Have you closed the door? The tap open? Is the drain hose placed and secured properly? Is power connected? When you press the On/Off button, your machine is ready to select the desired programme. To switch the machine off, repress the On/Off button. Washing can only start when the Start/Pause/Cancel button is pressed.
Start / Pause Cancel 3h 6h 9h

Prewash

Rinse Hold

Extra Rinse On/Off

Pressing the On/Off button does not mean that the washing operation will start! To start the washing, press the Start/Cancel/Pause button!

Amounts

Follow the manufacturers recommended amount of detergent given on the packaging. Adjust the amount according to the dirt level, the amount of fabric and the softness of the water. For example, if a small amount of clothing is washed, put in half the amount of detergent normally required. Do not fill the fabric softener above the max mark as any excess amount will mix into the wash water and you will have to re-fill the compartment.

Child Lock

To prevent operation by children you may activate child lock while the machine is in operation.In order to activate the child lock, press Prewash and Rinse Hold function keys simultaneously for 3 seconds after the washing programe has started. The prewash indicator light will flash continously.

Programme Follower

The relevant lamp on the program followup indicator lights up according to the selected program after the machine starts operating. Light of the completed step goes out and the next relevant step lights up. When the On/Off button is pressed, lamp of the Ready lights up. The Wash light on the program follow-up indicator lights up when Start/Pause/Cancel button is pressed after selecting the washing program. Spin/End indicator will light up when the program comes to an end. For your safety, your machine will not let you open the door for 1 minute after the program is finished. The Spin/End light will start flashing. After the door lock is deactivated, the Ready and Spin/End indicators will light up. You may now open door. You can put your machine to Pause mode when the machine is working by pressing the Start/Pause/Cancel button. Start/Pause/Cancel button will light up. Some alterations in program settings may be made in the Pause mode (See, Changing a Program) and if Pause mode is entered in an appropriate step of the program, adding laundry function may be used (See, Laundry adding feature).Allow 2 minutes for the door lock to be deactivated. Press Start/Pause/Cancel button again to return to the Wash mode from Pause mode.The Start/Pause/Cancel button will light up continuously and the machine will resume operating from the step it was paused.
Only the on/off button can be used when child lock option is selected. To start a new program after the program is over or to adjust the program, child lock should be deactivated. The child lock will be deactivated when the same keys are pressed together for 3 seconds and the Prewash indicator light will go out.

Programme operation

During the machines operation, the indicator lights on the programme follower will light up as each stage is reached. Softener is added in the softener compartment, it will be used in the last rinse cycle. If rinse hold is selected, you have to press Start/Pause/Cancel button, to let the programme continue.

Start / Pause Cancel

Spin /End

Adding Laundry

When loading laundry, make sure the garments are unfolded and are loosely placed in the drum. Place your knitted garments into the machine inside out. Ensure that no clothes are trapped between the door and the rubber bellow when closing the door. Push the door to close. Washing process will not start unless the door is closed.

Programme Cancelling

You can select a new program and start washing.To cancel a programme before it starts to wash press Start/Pause/Cancel key for 3 seconds. Start/Pause/Cancel and the other indicator lights will be off. If the programme has started and you want to cancel it, press Start/Pause button for 3 seconds. The programme will move to the spin step and related indicator on the programme follower will be on. Machine will start to pump for draining and the door can be opened after a short period of time.
Start / Pause Cancel Rinse Hold Extra Rinse On/Off
Re-Selection / Cancellation of Functions After Operation Start
In order to change auxiliary functions, push the Start/Pause/Cancel button for a short time to pause the program. Change the auxiliary functions allowed by the selected program. Press the Start/Pause/Cancel button for a short time to continue the program.

End of the programme

When the program ends Spin/End indicator light will come on.The door can then be opened after about 2 minutes and machine is ready for next washing load. Press On/Off to turn machine off.

Unloading

The machine stops automatically after programmes have been completed. 1 In about 2 min, the door will unlock. Open the door. 2 Press the On/Off button to switch off the machine. 3 Unload the machine and leave the door open. Check to see if there is any water left in the door gasket. If so, remove with a soft cloth.

programme descriptions

Cottons
Cotton 90, Cotton 60, Cotton 40, Cotton cold, A Class 40 Programmes
These programmes are used for white and coloured cotton and linen fabrics. Cotton 90 Programme with main wash (main wash, 3 rinses, 3 intermediate spin, final spin). The set temperature is 90C for this programme. Cotton 60 A class 60 Programme with main wash (main wash, 3 rinses, 3 intermediate spin, final spin).The set temperature is 60C for this programme. Cotton 40 Programme with main wash (main wash, 3 rinses, 3 intermediate spin, final spin).The set temperature is 40C for this programme. Cotton Cold Programme with main wash (main wash, 3 rinses, 3 intermediate spin, final spin).The set temperature is 40C for this programme. A Class 40 A Class 40 energy and washing efficiency (main wash, 3 rinses, 3 intermediate spin, final spin). The set temperature is 40C for this programme.

Woollens

Woollen 40, Woollen cold, Handwash Programmes
Woollen 40 Woollen programme (main wash, 3 rinses, 1 intermediate spin, final spin).The set temperature is 40C for this programme. Woollen Cold Woollen programme (main wash, 3 rinses, 1 intermediate spin, final spin). Handwash 30 Special programme for hand wash marked wool and silk. (main wash, 2 rinses, no intermediate spin, final spin). The set temperature is 30C. Mini 30 Short programme (main wash, 2 rinses, no intermediate spin, final spin). The set temperature is 30C.

Synthetics

Synthetics 60, Synthetics 40, Synthetics 30, Synthetics Cold, Delicate 30 Programmes
These programmes are designed for synthetic fabrics, nylon clothing, curtains and non iron wool fabrics. The clothing is washed gently with more water. Synthetics 60 Normal programme for synthetics (mainwash, 3 rinses, 3 intermediate spin, final spin). The set temperature is 60C for this programme. Synthetics 40 Normal programme for synthetics (main wash, 3 rinses, 3 intermediate spin, final spin). The set temperature is 40C for this programme. Synthetics 30 Normal programme for synthetics (main wash, 3 rinses, 3 intermediate spin, final spin). The set temperature is 30C for this programme. Synthetics Cold Normal programme for synthetics (main wash, 3 rinses, 3 intermediate spin, final spin). Delicate 30 Delicate programme. (main wash, no intermediate spin, 3 rinses, final spin) The set temperature is 30C for this programme.

Program Cottons 90 Cottons 60* Cottons 40 Cottons Cold A Class 40 Synthetics 60 Synthetics 40 Synthetics 30 Synthetics Cold Delicates 30 Woollens Cold Woollens 40 Handwash 30 Mini 30 Rinse Spin+Drain
Type of laundry Heavy soiled light Durable fabrics made of cotton and linen Normal soiled light cotton and linen durable to heat Less soiled light cotton and linen sensitive to heat Less soiled light cotton and linen sensitive to heat Heavy soiled light Durable fabrics made of cotton and linen (baby clothes etc.) Normal soiled light cotton/synthetic blended durable to heat Less soiled light cotton/synthetic blended durable to heat Very Less soiled light or cotton/synthetic blended sensitive to heat Very Less soiled light or cotton/synthetic blended sensitive to heat Delicate, sensitive synthetic, cotton blended Woollen and delicate laundry with machine wash sign Woollen and delicate blended with machine wash label Special program for silk, cashmere or laundry with no machine wash sign
Special program for slightly soiled and little amounts of laundry
Max Load (kg) 5 2.5 2.5 2.5 2.1.5 1.2.5
Program Duration (min.) 23 14
Water Consumption (lt) 15 _
Energy Consumption (kWh) 1.70 0.95 0.65 0.35 0.65 0.90 0.55 0.35 0.20 0.40 0.04 0,40 0.21 0.16 0.04 0.03

Prewash

Rinse Hold

Extra Rinse

Rinse Program Spin and Pump Program

function buttons

A pre-wash is only worth while with heavily soiled laundry. Without prewash you save energy, water, washing powder and time.
cotton/synthetics/delicates and wool programmes."

Extra rinse

Using this function, you can have 4 rinse cycles instead of 3. The additional rinse will extract more detergent for sensitive skin.

Rinse hold

"Using this function, you can leave your clothes in the water as long as required at the softener step. When you want to finish the washing cycle, select the spin speed first which is suitable for the clothing , and then press the "start/pause/cancel" button. The cycle will proceed with a spin phase and end. You can use this function only on

ITCL fabric care symbols

Descriptions of the international textile care label (ITCL) symbols.
Washing temperature Bleach can be used Do not use bleach Do not machine wash Dry on horizontal surface Do not wash

Dry clean

Chemicals can be used No dry cleaning No spin
Can be washed in centrifugal machine
Do not wash in centrifugal machine

Line dry

Iron permitted

Do not iron

Warm iron

care and maintenance

Detergent dispenser
It is necessary to remove the detergent dispenser drawer from time to time to clean away residue and ensure correct operation.

To remove

Pull out the drawer and press down on the coloured insert to release it fully from its housing. Wash the drawer in warm water to remove detergent and softener residue and before replacing wipe it dry.

Syphon

The syphon (coloured insert in the dispenser) must be cleaned. Remove the dispenser drawer and lift out the syphon and wash in warm water to remove any softener residue. Refit ensuring that the syphon is correctly fitted before use.

Maintenance wash

If you regularly use low temperature programs, for example 40C, certain detergents cause build up of greasy deposits over time. We recommend a hot maintenance wash once every 6 months to clear such accumulation of residue. Simply run the wash programme Cotton 90 without laundry using the usual amount of detergent.

Water intake filter

At the end of the water intake connection and water inlet hose-tap side there are filters. These filters prevent any dirt and objects passing into the machine. It is advisable that these filters should be cleaned every 30-40 washes. To clean these filters, first turn the tap off. Then, disconnect the hose and clean the filter with a thin brush. If the filter is very dirty, you may clean it by pulling out with pliers. To clean the filter at the tap side of the hose, pull it out by hand and clean the filter under tap water. Ensure that the sealing rings are in place before reassembly.

Pump filter warning

When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it.
To prevent any leakage, check the hoses every two years. If the machine is placed in cold ambient temperatures, the water remaining inside the pump and hoses should be drained to prevent freezing, empty the water intake hoses by disconnecting from taps.
Do not leave any metal objects (pins, needles, etc.) inside the drum. These objects may cause rust on the drum surface and stain clothing. Do not clean the drum with abrasive materials.

Cleaning the pump filter

Warning
Hot water danger! Always ensure that the drum is completely empty. Be careful while taking out the filter! Switch off the appliance. Open the filter cover by pulling at the holder as shown. Open the filter as shown turning the cap anti-clockwise, drain the water. If there are any foreign parts inside the filter, take them out and clean the filter before replacing it. Then, place the filter while turning it clockwise. When securely tightened, close the filter cover.

before calling service/troubleshooting
You turned the machine on, but the indicator light is not lit
Have you plugged in and switched on at the socket? Check the power cable, or for a blown fuse. Check the front door is properly closed. After your machine starts operation, if Start/Pause/Cancel button starts flashing then door is not locked. Open and close the door again and press Start/Pause/Cancel button to begin washing program again.
Pump does not drain water
Check Rinse Hold button has not been selected in error. Clean the pump filter. Do not attempt to remove the filter if the machine is full of water. Check whether the drain hose is bent or not. If there is a need to clean the pump filter, refer to the pump filter cleaning section on page 15.
Pre-wash indicator light on the program follower is blinking

Cancel child lock

Machine does not take in water
Check the door for proper closure. Either tap closed or water inlet filter is clogged. Turn the programme selector to the programme required. If the wash led on the program progress display and Start/Pause/Cancel button are flashing either there is no water or tap is off. Check your taps. Press Start/Pause/Cancel button. If the problem persists unplug your machine, turn off tap water and call customer service.
Water is syphoned / discharged
Check if the drain hose is positioned as described on page 6.
If the machine vibrates or is too noisy
Have all the transit bolts and packing been removed? Is the machine touching something? Are all the feet resting firmly on the ground? Have the lock nuts been secured? Has the recommended wash load been exceeded? (See page 13 for max program loads)
Water coming from beneath the machine
Check the water inlet and drain hoses. Tighten the connections. The washers of the hoses may be worn out or the pump filter may not have been closed properly.
Foam coming out of the detergent dispenser
Check whether your detergent is suitable for automatic machines. Next time use less detergent.

guarantee

Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? Repairs necessary as a result of faulty materials, defective components or manufacturing defect. The cost of functional replacement parts, but excluding consumable items. The labour costs of a Beko approved repairer to carry out the repair. What is not covered? Transit, delivery or accidental damage or misuse and abuse. Cabinet or appearance parts, including knobs, flaps, handles or container lids. Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets, filters and light bulbs. Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book. Repairs to products used on commercial or non-residential household premises. Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included within your household contents insurance policy, or may be available separately from your retailer). Important notes. Your Beko product is designed and built for domestic household use only. The guarantee will be void if the product is instalindicator light or used in commercial or non-residential domestic household premises. The product must be correctly instalindicator light, located and operated in accordance with the instructions contained in the User Instructions Booklet provided. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers Gas Cookers must only be instalindicator light by a CORGI (or BORD GAIS) registered Gas Installer. The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland. The guarantee is applicable only to new products and is not transferable if the product is resold. Beko disclaims any liability for incidental or consequential damages. The guarantee does not in anyway diminish your statutory or legal rights.

service

Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee. You should also complete the details below; it will help us assist you when requesting service. (The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label affixed to the appliance) Model No: Serial No: Retailer: Date of purchase:

Republic of Ireland

All Refrigeration, All Cookers Washing Machines & Dishwashers
Before requesting service please check the trouble-shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 1050 e-mail:service@beko.co.uk
For service under guarantee simply telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers Electric Cookers Gas & Dual Fuel Cookers Washing Machines & Dishwashers

241 0357

Beko plc Beko House, Caxton Way, Watford Hertfordshire, WD18 8UF Tel: Email: service@beko.co.uk Fax: 08707741090 www.beko.co.uk

Model Models & colour options White Silver Main features Spin speed (rpm)

WMXD760

WMA767

WMA747

WMA727

WMA657

WMA647

WMA620

WMA610

WM5140

WMA520

WMA510

WMXD760W WMXD760S

WMA767W WMA767S

WMA747W WMA747S

WMA727W WMA727S

WMA657W WMA657S

WMA647W WMA647S

WMA620W WMA620S

WMA610W WMA610S

WM5140W WM5140S

WMA520W WMA520S

WMA510W WMA510S

A+ A A 30

A A A 40

A A B 40

A A B 41

A A C 41

A A B

A A C

WASHING MACHINE SPECIFICATIONS
Max dry wash load capacity kg Energy efficiency class Washing performance Spin dry performance Total No. of programmes (inc. function buttons) Wide door opening, angle Mains on/off button Start/stop button Security door-lock Child lock, electronic Cold fill Programme sequence indicator lights Delay timer Automatic half load Automatic unbalanced load control Automatic water level control Automatic spin speed selection Auto wash water temperature selection Easy access filter Function buttons & special programmes Quick wash Extra rinse Rinse hold Anti-crease Pre-wash Special woollen programme Duration of mini (rapid) programme Baby & toddler clothing programme 65C Duo programme 40C A class cotton 40C Hand wash Manual spin speed reduction Consumption values & other technical specifications Energy consumption annual kWh/year Energy cons. (60C cot, no pre-wash) Water cons. (60C cot, no pre-wash) Voltage/frequency Water pressure Heater wattage (Max) Motor wattage Approved to BSEN60335 Dimensions & weights Dimensions (unpacked) HxWx*D mm Dimensions (packed) HxWxD mm Net weight kg

170

14 mins

165

30 mins

165

180

180

30 mins
238 1.19 kWh 49 lt 230V AC/50 Hz 110 bar 1900 W 350 W
238 1.19 kWh 49 lt 230V AC/50 Hz 110 Bar 1900 W 350 W
238 1.14 kWh 49 lt 230V AC/50 Hz 110 bar 1900 W 350 W
228 1.14 kWh 49 lt 230V AC/50 Hz 110 bar 1900 W 350 W
190 0.95 kWh 49 lt 230V AC/50 Hz 110 bar 1900 W 350 W
Beko plc. Beko House, Caxton Way, Watford, Hertfordshire WD18 8UF Tel Fax www.beko.co.uk
190 0.95 kWh 49 lt 230V AC/50 Hz 0, 110 bar 1900 W 350 W

Wash & Dry

Washing Machines and Tumble Dryers
Beko plc continuously seek improvements in specification, design and production of products and thus alterations take place periodically. Whilst every effort is made to produce up-to-date literature, this brochure should not be regarded as an infallible guide to current specification, nor does it constitute an offer for the sale of any particular appliance.

850x595x*595 880x650x78

850x595x*540 880x650x74

850x595x*480 880x650x61

850x595x*540 885x645x63

850x595x*540 885x645x68

Gross weight kg
*Depth excludes any protruding features such as handles, knobs and bowed doors.
YOUR IDEAL WASHING MACHINE HERES HOW YOU FIND IT
Combining great performance with superb style, the Beko Washing Machine range is designed for modern living. With user friendly features to make your life simpler and improved energy efficiency for economic operation, a Beko washing machine is always a good decision. Beko - Smart Choice.
RPM FROM 1000 TO 1600 CHOOSE THE SPEED YOU WANT
The RPM tells you how fast the machine can spin a load of washing. The faster the spin, the more water is extracted from the load and the quicker the drying time.

Features Guide

AUTO HALF LOAD
As wash loads vary in size and fabric type, the auto half load feature ensures the correct level of water is used for each wash. Saving water and energy in this way not only helps the environment but also the family budget.

QUICK WASH

If you wish to wash lightly soiled garments, the quick wash feature is a time saver. It not only reduces washing time but also saves energy.

RINSE HOLD

This function cancels the final drain and spin, holding the garments in the water. It can be used when garment are not to be removed immediately or when no spin is required.
'A' FOR ENERGY EFFICIENCY SHOWS YOU JUST HOW GREEN YOUR MACHINE IS
Energy consumption is now one of the major factors in the battle to reduce our carbon footprint. Bekos Xpress model has the highest energy-saving ratings helping you make your contribution to a safer and more stable environment.

COTTON 60

This standard programme delivers A wash performance for family-sized loads of laundry.
LOADING FROM 5KG TO 7KG CHOOSE THE CAPACITY YOU NEED
How much you have to wash and how often you like to do it will tell you whether you need the convenience of a large load or the economy of a smaller load.

DELAY START

This option allows you to wash when convenient for you or when a lower cost rate of electricity is available.

WOOL PROGRAMME

For extra care, the wool cycle programme reduces the rotation speed so that clothes are gently and constantly moved in the water.

EASY LOADING

180 door opening means easy loading and unloading.

EXTRA RINSE

Beko washing machines guarantee perfect washing results by adjusting the water level to suit programmes and fabric types. The extra rinse option removes any trace of detergent, especially useful for baby garments and people with allergies to detergents.
FEATURES - A UNIQUE SET FOR EACH MACHINE LOOK FOR FEATURES THAT CAN SAVE YOU TIME AND ENERGY
Extra function buttons, special 30 min programme, auto selection of spin speed and wash water temperature, programme progress indicating lights - choose the machine that exactly matches your needs.
OUT OF BALANCE CONTROL SYSTEM
By ensuring that laundry is distributed evenly around the drum, this system eliminates vibration and noise. It also ensures that garments are spun at the maximum speed possible, re-adjusting if necessary.
WMXD760 Half the effort WMXD760 Half the time
Xpress from Beko, quite literally the quickest washing machine on the market so quick, you get your whole wash done in half the time. Its so quiet you can use it any time you want day or night without disturbing anyone.
Main features 7KG load capacity 1600rpm spin Wide opening large porthole door 16 main programmes Xpress 14min 2kg wash Xpress 30min 7kg wash Xpress 58min 7kg wash Anti crease & extra rinse buttons Automatic half load LED Display 24hr timer delay Time remaining display Dimensions

H 85cm W 59.5cm D 59.5cm

Main features 7KG load capacity 1600rpm spin Wide opening large porthole door 16 main programmes Easy see LCD display Anti crease, extra rinse and quick wash buttons Automatic half load 24hr timer delay Time remaining display Programme progress indicating lights Rapid 30 min programme

Dimensions

Main features 7KG load capacity 1400rpm spin Wide opening large porthole door 16 main programmes Easy see LCD display Anti crease, extra rinse and quick wash buttons Automatic half load 24hr timer delay Time remaining display Programme progress indicating lights Rapid 30 min programme

Colours

White: WMA767W Silver: WMA767S
White: WMA747W Silver: WMA747S
Main features 7KG load capacity 1200rpm spin Wide opening large porthole door 16 main programmes Easy see LCD display Anti crease, extra rinse and

quick wash buttons

Programme progress indicating lights Rapid 30 min programme Dimensions
Main features 6KG load capacity 1500rpm spin Wide opening large porthole door 16 main programmes Easy see LCD display Anti crease, extra rinse and
Main features 6kg load capacity 1400rpm spin Wide opening large porthole door 16 main programmes Easy see LCD display Anti crease, extra rinse and
Main features 6kg load capacity 1200rpm spin Large porthole door with handle,

door opens 165 degrees

20 main programmes Automatic half load Rapid 30 min programme Dimensions

H 85cm W 59.5cm D 54cm

White: WMA727W Silver: WMA727S
White: WMA657W Silver: WMA657S
White: WMA647W Silver: WMA647S
Extra function buttons: quick wash, extra rinse, anti-crease and spin speed reduction knob 3, 6 and 9 hr delay timer Programme progress indicating lights Automatic selection of spin speed and

wash water temperature

White: WMA620W Silver: WMA620S
Automatic half load 24hr timer delay Time remaining display
Main features 6kg load capacity 1000rpm spin Large porthole door with handle,
Duo 40 programme to wash colorfast
cotton and synthetics together
Main features 5kg load capacity 1400rpm spin Large porthole door with handle,

door opens 180 degrees

H 85cm W 59.5cm D 48cm
Main features 5kg load capacity 1200rpm spin
16 main programmes Dimensions
Main features 5kg load capacity 1000rpm spin Large porthole door with handle,
Rapid 30 min programme 20 main programmes Dimensions
White: WM5140W Silver: WM5140S
Large porthole door with handle,
White: WMA510W Silver: WMA510S
Extra function buttons: quick wash, extra
rinse and spin speed reduction
3, 6 and 9 hr delay timer Programme progress indicating lights Automatic selection of spin speed
and wash water temperature
Extra function buttons: quick wash,

extra rinse, pre-wash and spin speed reduction knob
White: WMA520W Silver: WMA520S
Extra function buttons: extra rinse,

rinse hold and pre-wash

Programme progress indicating lights Automatic selection of spin speed

White: WMA610W

Rapid 30 min programme 16 main programmes

Rapid 30 min programme

Baby and toddler clothing programme
Model Models & colour options White
DRVS62 DRVS62W DRVS62S 6kg C 11, 7/4 150o 3.39 kWh/cycle 230 V AC / 50Hz 200 850x600x*620 890x665x31
DRV568 DRV568W DRV568S 6kg C
TUMBLE DRYERS NOW PICK THE PERFECT PARTNER
Designed to save you time and money, Beko tumble dryers are very simple and easy to operate. They are styled to complement the Beko range of washing machines and are available with an optional stacking kit. Beko - Smart Choice.

DRVS62 Features Guide

AUTOMATIC SENSOR DRYING
An electronic control system automatically stops the dryer when clothes have reached the selected level of dryness.

DRV568

Silver Main features Max dry load capacity Energy efficiency class No. of main programmes, sensor/timed Large porthole door, angle Mains on/off button Security door-lock Child lock feature operated electronically Dryness level and programme sequence indicator lights Easy access filter positioned conveniently Function buttons & special programmes Full electronic programme selection system & automatic sensor drying Start/pause cancel button Buzzer cancel button High quality condenser unit Cottons Extra dry Ready to wear Ready to iron Synthetics Ready to wear Ready to iron Delicates Freshen up Timed programmes 10 minutes

CONDENSER MODEL

Cools the damp air in the machine which condenses into a removable drawer, giving you the freedom to install the dryer where required.
Bekos outstanding style and performance is also available:
TUMBLE DRYER SPECIFICATIONS
11, 7/4 150o 3.84 kWh/cycle 230 V AC / 50Hz 225 3.5 lts 850x600x*560 890x665x38
PLUS, PLUS, PLUS TIMED PROGRAMMES
Built-in programmes provide units of drying time, giving you great flexibility and control over your laundry.
Automatic anti-creasing Reverse action to dry clothes more evenly End of cycle indicator lights Child lock Safe auto cool down Built-in timer

VENTED MODEL

Expels damp air from the machine through a flexible hose connected to a window or permanent vent. It is the cheaper, more energy efficient drying option.

Stacking Kit

Optional stacking kit for use with

matching Beko Tumble Dryers.
20 minutes 40 minutes 60 minutes Other features Auto cooldown phase Water tank full indicator light Clean filter indicator light Automatic anti-creasing feature Reverse action (bi-directional drum action) Inner drum material: galvanised steel
White model number: DRKITW
Silver model number: DRKITS Beko Tumble Dryers are designed to match WMA6 and WMA7 series of Beko Washing Machines.
Main features 6kg load capacity vented, auto sensor

drying tumble dryer

H 85cm W 60cm D 56cm
Main features 6kg load capacity condenser,
auto sensor drying tumble dryer

Number of programmes: 11

7 Sensor drying programmes 4 Timed drying programmes
White: DRVS62W Silver: DRVS62S
Pull out draw situated at the top on the
left of the control panel for easy and user friendly water disposal
White: DRV568W Silver: DRV568S
Two adjustable feet at the front for levelling Reversible door 1.5 venting hose supplied Non slippage feet pads Consumption values & other technical specifications Energy consumption acc. to EN61121:2005 Voltage/frequency Total power W Heater wattage W Max Motor wattage W Water tank capacity Approved to BSEN60335 Dimension & weights Dimensions (unpacked) HxWxD*mm Dimensions (packed) HxWxDmm Net weight kg Gross weight kg
Large porthole door, opens 150 degrees Solid rectangular door with integrated handle Function buttons: start/pause/cancel/

end of cycle buzzer

Number of programmes: Sensor drying programmes 4 Timed drying programmes Large porthole door, opens 150 degrees Solid rectangular door with integrated handle Function buttons: start/pause/cancel/
Dishwashers Fridges & Freezers Cookers LCD Televisions
1.5m venting hose supplied with the
product including adaptor piece