Reviews & Opinions
Independent and trusted. Read before buy Belkin F5D6231-4!

Belkin F5D6231-4

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Belkin F5D6231-4Belkin Components Belkin Wireless Cable/DSL Gateway Router Wireless router - 4-port switch (integrated) - EN, Fast EN, IEEE 802.11b

External, Firewall protection, DMZ port, NAT support, VPN support

Belkin wireless networking provides the perfect solution for the most advanced, cable-free installations. Belkin Wireless Cable/DSL Gateway Router (Router) uses the 802.11b wireless Ethernet standard to let you share a broadband Internet connection among your computers - without cables. The Router features an integrated 4-port 10/100BaseT Ethernet switch that allows you to connect wired computers for all the advantages of networking. It makes sharing files and peripherals, such as hard drives, p... Read more

 

[ Report abuse or wrong photo | Share your Belkin F5D6231-4 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Package Contents Belkin Wireless Cable/DSL Gateway Router Vertical Mounting Base (optional use) Category 5 Networking Cable Power Supply Belkin Easy Install Wizard Software CD User Manual System Requirements Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer CAT5 networking cable (or better) Microsoft Internet Explorer 4.0 or later, or Netscape 4.0 or later Easy Install Wizard Software System Requirements A PC running Windows 98, Me, 2000, or XP Minimum 64MB RAM Internet Browser NOTE: At the time of printing, a version of the Easy Install Wizard was not available for Mac OS users. Please check www.networking.belkin.com to see if a Mac OS version of the Easy Install Wizard is now available.

Page 4

KNOWING YOUR BELKIN ROUTER
The Router has been designed to be placed on a desktop vertically or horizontally, or it may be mounted to a wall. The slim design minimizes the desktop space required when placed vertically. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status. 1. Power/Ready LED When you apply power to the Router or restart it, a short period of time elapses while the Router boots up. During this time, the Power/Ready LED blinks. When the Router has completely booted up, the Power/Ready LED becomes a SOLID light, indicating the Router is ready for use. OFF Router is OFF Blinking Green Router is Booting Up Solid Green Router is Ready 2. Wireless Network-Ready LED OFF Solid Green
Wireless Network is OFF Wireless Network is Ready
3. LAN Port-Status LEDs These LEDs are labeled 14 and correspond to the numbered ports on the rear of the Router. When a computer is properly connected to one of the LAN ports on the rear of the Router, the LED will light. GREEN means a 10Base-T device is connected, AMBER means a 100Base-Tx device is connected. When information is being sent over the port, the LED blinks rapidly. OFF Green Orange Blinking (Orange or Green) No Device is Linked to the Port 10Base-T Device Connected 100Base-Tx Device Connected Port Activity

Page 5

Front Panel (1) (2) (3) (4) (5)
Port Number Labeling Antenna

Rear Panel

4. WAN Status LED This LED lights in GREEN to indicate that your modem is connected properly to the Router. It blinks rapidly when information is being sent over the port between the Router and the modem. OFF Solid Green Blinking Green No WAN Link Good WAN Link WAN Activity

Page 6

5. Connected LED This unique LED shows you when the Router is connected to the Internet. When the light is OFF, the Router is NOT connected to the Internet. When the light is blinking, the Router is attempting to connect to the Internet. When the light is solid GREEN, the Router is connected to the Internet. When using the Disconnect after x minutes feature, this LED becomes extremely useful in monitoring the status of your Routers connection. OFF Router is not Connected to the Internet Blinking Green Router is Attempting to Connect to the Internet Solid Green Router is Connected to the Internet 6. Reset Button The Reset button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Routers normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. a. Using the Reset Button to Reset the Router Push and release the Reset button. The lights on the Router will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the reset is complete. b. Using the Reset Button to Restore the Factory Defaults Press and hold the Reset button for five seconds then release it. The lights on the Router will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the restore is complete. 7. Shared Uplink Port The shared uplink port is provided for connection to a hub or a switch for expanding the number of network ports on the Router. If you are connecting a switch or hub to the Router, connect a straight-through (standard) network cable to this port and to a port on the switch or hub. Note: The uplink port is shared with port 1 of the Router. You cannot connect a device to the uplink port and to port 1 at the same time.

Step 5: Adding Other Computers to your Network Using the Easy Install Wizard
If you have other computers in your home that are already equipped with a wired or wireless network adapter, you can use the Easy Install Wizard to set up those computers to connect to your Router. If you are adding a Belkin wired or wireless network adapter to your other computers, install the adapter per the instructions for the adapter. When the installation of the adapter is finished, your computer will be set up to connect to the Router. You do not need to use the Easy Install Wizard to set up the computer. For Computers Already Equipped with a Wired or Wireless Network Adapter 5.1 For wired computers, connect an Ethernet cable between the computer you want to add to the network and the Router. For wireless-equipped computers, make sure your wireless adapter is installed and working. Set your wireless adapter to connect to a wireless network SSID named WLAN or ANY. In many cases you will find that you do not have to make any changes. Refer to the documentation of your wireless network adapter for information on making this change. Go to the next step. 5.2 Insert the CD into your CD-ROM drive. The Easy Installation Wizard screen will automatically pop-up on your screen within 15 seconds. If it does not, select your CD-ROM drive and double-click on the file named Setup on the CD-ROM. 5.3 Click Add computers.

Page 19

5.4 The Wizard will make the changes needed to add your computer to the network. When finished, it will prompt to reboot your computer. Click Yes.
5.5 When your computer reboots, your computer will be connected to the network. To begin surfing the Internet, open your browser and go to your favorite web page. You are finished adding the computer to the network. To add more computers, repeat this process on each computer you wish to add.

Page 20

ALTERNATE SETUP METHOD
The Advanced User Interface is a web-based tool that you can use to set up the Router if you dont want to use the Easy Install Wizard. You can also use it to manage advanced functions of the Router. From the Advanced User Interface, you can perform the following tasks: View the Routers current settings and status. Configure the Router to connect to your ISP with the settings that they provided you change the current network settings such as the Internal IP address, the IP address pool, DHCP settings and more. Set the Routers firewall to work with specific applications (port forwarding). Set up security features such as client restrictions and MAC address filtering. Enable the DMZ feature for a single computer on your network. Change the Routers internal password. Enable/Disable UPnP (Universal Plug-and-Play). Reset the Router. Back up your configuration settings. Reset the Routers default settings. Update the Routers firmware.

Page 25

Alternative Method Step 4: Configuring your Router for Connection to your ISP
The Internet/WAN tab is where you will set up your Router to connect to your Internet Service Provider. The Router is capable of connecting to virtually any Internet Service Providers system provided you have correctly configured the Routers settings for your ISPs connection type. Your ISP connection settings are provided to you by your ISP. To configure the Router with the settings that your ISP gave you, click Connection Type (A) on the left side of the screen. Select the connection type you use. If your ISP gave you DNS settings, clicking DNS (B) allows you to enter DNS address entries for ISPs that require specific settings. Clicking MAC address (C) will let you clone your computers MAC address or type in a specific WAN MAC address, if required by your ISP. When you have finished making settings, the Internet Status indicator will read connection OK if your Router is set up properly.

(A) (B) (C)

Page 26
Setting your Connection Type From the connection type page, you can select the type of connection you use. Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking Next (2).
Setting your ISP Connection Type to Dynamic IP A dynamic connection type is the most common connection type found with cable modems. Setting the connection type to dynamic in many cases is enough to complete the connection to your ISP. Some dynamic connection types may require a host name. You can enter your host name in the space provided if you were assigned one. Your host name is assigned by your ISP. Some dynamic connections may require that you clone the MAC address of the PC that was originally connected to the modem.

(1) (2) (3)

Page 27
1. Host Name This space is provided to enter a host name that needs to be visible to your ISP. Enter your host name here and click Apply Changes (3). If your ISP did not assign you a host name, or you are not sure, leave this blank. 2. Change WAN MAC Address If your ISP requires a specific MAC address to connect to the service, you can enter a specific MAC address or clone the current computers MAC address through this link. Setting your ISP Connection Type to Static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. This information is available from your ISP or on the paperwork that your ISP left with you. Type in your information, then click Apply Changes (5). After you apply the changes, the Internet Status indicator will read connection OK if your Router is set up properly.

Page 37

Viewing the DHCP Client List Page
You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address (1) of the computer, the host name (2) (if the computer has been assigned one), and the MAC address (3) of the computers network interface card (NIC). Pressing the Refresh (4) button will update the list. If there have been any changes, the list will be updated.

(2) (1)

(3) (4)

Page 38

Configuring the Wireless Network Settings
The Wireless tab lets you make changes to the wireless network settings. From this tab you can make changes to the wireless network name (SSID), operating channel, encryption security settings, and configure the Router to be used as an access point.

Page 39

Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is WLAN. You can change this to anything you want to or you can leave it unchanged. If there are other wireless networks operating in your area, you will want to make sure that your SSID is unique (does not match that of another wireless network in the area). To change the SSID, type in the SSID that you want to use and click Apply Changes. The change is immediate. If you make a change to the SSID, your wireless-equipped computers may also need to be reconfigured to connect to your new network name. Refer to the documentation of your wireless network adapter for information on making this change.

Page 40

Changing the Wireless Channel There are a number of operating channels you can choose from. In the United States, there are 11 channels. In the United Kingdom and most of Europe, there are 13 channels. In a small number of other countries, there are other channel requirements. Your Router is configured to operate on the proper channels for the country you reside in. The default channel is 11. The channel can be changed if needed. If there are other wireless networks operating in your area, your network should be set to operate on a channel that is different than the other wireless networks. For best performance, use a channel that is at least five channels away from the other wireless network. For instance, if another network is operating on channel 11, then set your network to channel 6 or below. To change the channel, select the channel from the drop-down list. Click Apply Changes. The change is immediate.

Page 45

Configuring the Firewall
Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: IP Spoofing Land Attack Ping of Death (PoD) Denial of Service (DoS) IP with zero length Smurf Attack TCP Null Scan SYN flood UDP flooding Tear Drop Attack ICMP defect RIP defect Fragment flooding The firewall also masks common ports that are frequently used to attack networks. These ports appear to be Stealth meaning that for all intents and purposes, they do not exist to a would-be hacker. You can turn the firewall function off if needed, however, it is recommended that you leave the firewall enabled. Disabling the firewall protection will not leave your network completely vulnerable to hacker attacks, but it is recommended that you leave the firewall enabled.

Page 46

Configuring the Port Forwarding Settings Application gateways let you select ports to be open for certain applications to work properly with the Network Address Translation (NAT) feature of the Router. A list of popular applications has been included to choose from. You can select an application from the drop-down list and the proper settings will be programmed into the Router. If the application you want to set up for is not here, check the Virtual Servers page by clicking Virtual Servers on the left side of the screen. If you cannot find your application in either the Application Gateways screen or the Virtual Servers screen, you will need to check with the application vendor to determine which ports need to be configured. You can manually input this port information into the Router.

Page 47

Choosing an Application Select your application from the drop-down list. Click Add. The settings will be transferred to the next available space in the screen. Click Apply Changes to save the setting for that application. To remove an application, select the number of the row that you want to remove then click Clear.

Page 48

Configuring Internal Forwarding Settings The Virtual Servers function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. Since your internal computers are protected by a firewall, computers outside your network (over the Internet) cannot get to them because they cannot be seen. A list of common applications has been provided in case you need to configure the Virtual Server function for a specific application. If your application is not listed, you will need to contact the application vendor to find out which port settings you need.

Page 49

Choosing an Application Select your application from the drop-down list. Click Add. The settings will be transferred to the next available space in the screen. Click Apply Changes to save the setting for that application. To remove an application, select the number of the row that you want to remove then click Clear. Manually Entering Settings into the Virtual Server To manually enter settings, enter the IP address in the space provided for the internal (server) machine, the port(s) required to pass (use a comma between multiple ports), select the port type (TCP or UDP), and click Apply Changes. You can only pass one port per internal IP address. Opening ports in your firewall can pose a security risk. You can enable and disable settings very quickly. It is recommended that you disable the settings when you are not using a specific application.

Page 50

Setting Client IP Filters The Router can be configured to restrict access to the Internet, e-mail, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers.
To restrict Internet access to a single computer for example, enter the IP address of the computer you wish to restrict access to in the IP fields (1). Next, enter 88 in both the port fields (2). Select Both (3). Select Block (4). You can also select Always to block access all of the time. Select the day to start on top (5), the time to start on top (6), the day to end on the bottom (7), and the time to stop (8) on the bottom. Select Enable (9). Click Apply Changes. The computer at the IP address you specified will now be blocked from Internet access at the times you specified. Note: Be sure you have selected the correct time zone under Utilities> System Settings> Time Zone.

(1) (2) (5) (6)

(3) 50

Page 51

Setting MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client (computer) on your network to allow network access to each. The Block feature lets you turn on and off access to the network easily for any computer without having to add and remove the computers MAC address from the list.
To enable this feature, select Enable MAC Address Filtering (1). Next, enter the MAC address of each computer on your network by clicking in the space provided (2) and entering the MAC address of the computer you want to add to the list. Click Add (3), then Apply Changes to save the settings. To delete a MAC address from the list, simply click Delete next to the MAC address you wish to delete. Click Apply Changes to save the settings. Note: You will not be able to delete the MAC address of the computer you are using to access the Router's administrative functions (the computer you are using now).

1. Click the Restore Defaults button. 2. The following message will appear. Click OK.
3. The following message will appear. Restoring the defaults includes restarting the Router. It can take up to 60 seconds. It is important not to turn the power to the Router off during the restart. 4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Routers defaults will be restored. The Router home page should appear automatically. If it does not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser.

Page 57

Saving a Current Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
1. Click Save. A window called File Download will open. Click Save.

Page 58

2. A window will open that allows you to select the location where you want to save the configuration file. Select a location. You can name the file anything you want, or use the default name Config. Be sure to name the file so you can locate it yourself later. When you have selected the location and name of the file, click Save.
3. When the save is complete, you will see the window below. Click Close. The configuration is now saved.

Page 59

Restoring a Previous Configuration This option will allow you to restore a previously saved configuration.
1. Click Browse. A window will open that allows you to select the location of the configuration file. All configuration files end with a.bin. Locate the configuration file you want to restore and double-click on it.
2. You will be asked if you want to continue. Click OK.

Page 60

3. A reminder window will appear. It will take up to 60 seconds for the configuration restoration to complete. Click OK.
4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Routers configuration will be restored. The Router home page should appear automatically. If not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser.

Page 61

Updating Firmware
From time to time, Belkin may release new versions of the Routers firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Routers firmware to the latest version.

Checking for a New Version of Firmware The Check Firmware (1) button allows you to instantly check for a new version of firmware. When you click the button, a new browser window will appear informing you that either no new firmware is available or that there is a new version available. If a new version is available, you will have the option to download it. Downloading a New Version of Firmware If you click the Check Firmware button and a new version of firmware is available, you will see a screen such as the following.

Page 62

1. To download the new version of firmware, click Download. 2. A window will open that allows you to select the location where you want to save the firmware file. Select a location. You can name the file anything you want, or use the default name. Be sure to locate the file in a place where you can locate it yourself later. When you have selected the location, click Save.
3. When the save is complete, you will see the following window. Click Close. The download of the firmware is complete. To update the firmware, follow the next steps in Updating the Routers Firmware.

Page 63

Updating the Routers Firmware 1. In the Firmware Update page, click Browse (2). A window will open that allows you to select the location of the firmware update file. All firmware files end with a.dlf.
2. Browse to the firmware file you downloaded. Select the file by doubleclicking on the file name. 3. The Update Firmware box will now display the location and name of the firmware file you just selected. Click Update.
4. You will be asked if you are sure you want to continue. Click OK.

Page 64

5. You will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted. Click OK.
6. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router firmware update will be complete. The Router home page should appear automatically. If not, type in the Routers address (default = 192.168.2.1) into the navigation bar of your browser.
The firmware update is complete.

Page 65

Changing System Settings The System Settings page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the NAT function of the Router. Setting or Changing the Administrator Password The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future. It is also recommended that you set a password if you plan to use the remote management feature of your Router.

Changing the Login Timeout Setting The login timeout option allows you to set the period of time that you can be logged into the Routers advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes in the advanced setup interface, then left your computer alone without clicking Logout. Assuming the timeout is set to 10 minutes, then 10 minutes after you leave, the login session will expire. You will have to login to the Router again to make any more changes. The login timeout option is for security purposes and the default is set to 10 minutes. Note: Only one computer can be logged into the Routers advanced setup interface at one time.

Page 66

Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to record the security log and control client filtering. Select the time zone that you reside in. If you reside in an area that observes Daylight Saving, then place a check mark in the box next to Enable Daylight Saving. The system clock may not update immediately. Allow at least 15 minutes for the Router to contact the time servers on the Internet and get a response. You cannot set the clock yourself.
Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Routers settings from anywhere on the Internet. There are two methods of remotely managing the Router. The first is to allow access to the Router from anywhere on the Internet by selecting Any IP address can remotely manage the Router. By typing in your WAN IP address from any computer on the Internet, you will be presented with a login screen where you need to type in the password of your Router. The second method is to allow a specific IP address only to remotely manage the Router. This is more secure, but less convenient. To use this method, enter the IP address you know you will be accessing the Router from in the space provided and select Only this IP address can remotely manage the Router. Before you enable this function, it is STRONGLY RECOMMENDED that you set your administrator password. Leaving the password empty will potentially open your Router to intrusion.

Page 67

Enabling/Disabling NAT (Network Address Translation) Note: This advanced feature should be employed by advanced users only. Before enabling this function, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Network Address Translation (NAT) is the method by which the Router shares the single IP address assigned by your ISP with the other computers on your network. This function should only be used if your ISP assigns you multiple IP addresses or you need NAT disabled for an advanced system configuration. If you have a single IP address and you turn NAT off, the computers on your network will not be able to access the Internet. Other problems may also occur. Turning off NAT will not affect your firewall functions.

Page 77

My connection type is static IP address. I cannot connect to the Internet. Since your connection type is static IP address, your ISP must assign you the IP address, subnet mask, and gateway address. Make sure that the Routers connection type is configured as Static IP Address and verify your settings. Your ISP may bind your connection to the MAC address of your computers NIC. Clone your MAC address. My connection type is dynamic IP address. I cannot connect to the Internet. Make sure your computers are correctly configured and all network cables are properly connected. Make sure the cable or DSL line is properly attached on your cable or DSL modem. Refer to the manual of your modem to verify that it works normally. Make sure the network cable between the modem and the barricade is well connected. Power off the modem; wait a few seconds and then power it on again. Your ISP may bind your connection to the MAC address of your computers NIC. Clone your MAC address. My connection type is PPPoE. I cannot connect to the Internet. Since your connection type is PPPoE, your ISP will assign you a user name and password and sometimes a service name. Make sure the Router connection type is configured as PPPoE and these settings are entered properly. Make sure your computers are correctly configured and all network cables are properly connected. Make sure the coaxial cable or DSL line is properly attached on your cable or DSL modem. Refer to the manual of your modem to verify it works normally. Make sure the network cable between the modem and the Router is well connected. Power off the modem for a few seconds and power on it again. Your ISP may bind your connection to the MAC address of your computers NIC. Clone your MAC address.

Page 78

INFORMATION
FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D6231-4 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Page 80

Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations of exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

belkin.com

Belkin Corporation
501 West Walnut Street Compton CA 90220 USA Tel: 310.898.1100 Fax: 310.898.1111

Belkin Components, Ltd.

Express Business Park Shipton Way Rushden NN10 6GL United Kingdom Tel: +44 (0) 2000 Fax: +44 (0) 2000

Belkin Components B.V.

Starparc Building Boeing Avenue PH Schiphol-Rijk The Netherlands Tel: +31 (0) 7300 Fax: +31 (0) 7349
7 Bowen Crescent West Gosford NSW 2250 Australia Tel: +61 (0) 8600 Fax: +61 (0) 8603

Belkin Tech Support

US: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 Europe: 460 Australia: 040

P74122

2002 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.

doc1

RELEASE NOTE

RELEASE NOTE FOR ROUTER F5D6231-4, FIRMWARE 1.00.000

DATE: APRIL 16, 2003

These release notes describe features and caveats. The main code module for this release is compatible and downloadable into the switch over the network using the TFTP protocol. Please refer to the Installation and User Guide for a detailed description of the download procedure. Refer to the Belkin User Guide for information about using the embedded web management capability of the switch. This version of software F5D6231-4-v1.00.000-runtime.bin supports the following models of the F5D5231-x and F5D6231-x product family: ?? F5D6231-3 KNOWN ISSUES 1. When User setting ussing access point only with user specified IP. This user manual setting ip will not save to NV, but using default(192.168.2.254) as access point ip address 2. Using wireless encryption128bit mode will causing cant get IP
RESOLVED ISSUES PRE-RESOLVED ISSUES
LIMITATION & RESTRICTIONS:

APPROVED BY:

Submitted By: Date

Product Manager

Technical Support
There are 2 types of firmware release, formal and engineering beta test version. Formal version: X.Y0 X: number from 1, Example: V1.00, and V1.10

Y: 0 - 9

Engineering Beta and Test version: X.YZE X: number from 0, Y: Z: 0 - 9 Example: V0.01E, V1.02E, or V1.14E

NOVEMBER 31, 2001

CONFIDENTIAL

PAGE 1 OF 3

RELEASE NOTES BELKIN COMPONENTS, INC.

SOFTWARE RELEASE 1.11

BELKIN CONFIDENTIAL

PAGE 2 OF 3

 

Technical specifications

Full description

Belkin wireless networking provides the perfect solution for the most advanced, cable-free installations. Belkin Wireless Cable/DSL Gateway Router (Router) uses the 802.11b wireless Ethernet standard to let you share a broadband Internet connection among your computers - without cables. The Router features an integrated 4-port 10/100BaseT Ethernet switch that allows you to connect wired computers for all the advantages of networking. It makes sharing files and peripherals, such as hard drives, printers, CD-ROMs, DVDs and more easier than ever. The Router offers advanced features for the highest level of flexibility. Using its firewall, the Router protects your network from outside intrusions by hackers. Its IPSec pass-through allows you to work from another location using Virtual Private Networking (VPN). DMZ hosting lets you play accelerated games over the Internet.

General
Device TypeWireless router - 4-port switch (integrated)
Enclosure TypeDesktop
Connectivity TechnologyWireless
Data Link ProtocolEthernet, Fast Ethernet, IEEE 802.11b
Network / Transport ProtocolIPSec
Encryption Algorithm128-bit WEP, 64-bit WEP
FeaturesFirewall protection, DMZ port, NAT support, VPN support
Built-in DevicesAntenna
Expansion / Connectivity
InterfacesLAN : 4 x 10Base-T/100Base-TX - RJ-45
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Universal Product Identifiers
BrandBelkin Components
Part NumberF5D6231-4
GTIN00722868442968

 

Tags

RM-AV3000 Cable Universal 120 330GSM DPF-V800 Lrfd25850ST Divx EDI Samsung S73 32LC56 AEC YZF-R6-2007 Pegaso 650 MPK-THD Review BQ-324 SRT 5004 KRC-579R TH-37PX7E ADR3006 MC 350E 104109 AR-M256 M316 Volume8 Zelda-majoras Mask AD-44 TA-DA9000ES DMC-L1K CD-SR110 IC-2410A-e-H PSR-16 PHN668U GR-AXM910 UX-H100 300 E 202MK4 TI-34 Digimax202 WF7522S8V TX-6500II DVM-3700 CFD-222L BE-300 Aspire 3650 CH-X1500 LN40R71B Siemens AF51 AFE400 DP-1000 DCR-TRV40 44 AF-4 Optio W20 WM2177HW CF19E22 31A-660 AF140C P1003J Series ID9370B Coolpix S560 LN46A530p1F AF160 One 2100 23PF5320 Of Wwii CWL4GE KRC-778RV VT6200 TH-42PX8BA 7916 TA ECM-R100 PCG-FR315M Elpsc21 Servers System EF2201 32LC25R ARX4570 DMC-G1K Travelmate-C110 T1028 CMT-EP303 Alertegps G120 Mini-ITX CA-R-pi 182 NPS-520 PS50B450b1wxxc NVD-Z001 MF 3560 Dvrhd1059P RMD169 Bridge 510 CMX100III WA95V9 KDL-60EX701 Deluxe KX-FLM672CX VPC-S70EX Sorry Digital Midnight-2008 V1 X DSC-W7

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101