Joybee 125 MP3 Player Users Manual

Welcome

Copyright
All rights reserved. No part of this publication may be reproduced, transmitted, recorded, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, recording, photocopying, or otherwise, without the prior permission of BenQ Corporation.

Disclaimer

No warranty or representation, either expressed or implied, shall BenQ Corporation make with respect to the quality, accuracy or fitness for any particular purpose of this document. The information in this document is subject to change without notice. The content of this manual has been checked and proofread prior to publication. *Windows is the registered trademark of Microsoft Corporation. All trademarks or product names appearing in this manual are registered property of their respective owners.

Cautions

This MP3 player is a delicate electronic device, DO NOT OPEN IT. Do not format memory into FAT32 or NTFS format. Do not attempt to dissemble or modify any part of device. Avoid shock or impact on device. Keep device away from water. Keep device away from extreme temperatures, humidity, dust or direct sunlight. Do not clean device with chemical solvent. Clean device with a cloth dampened with water. Use only adaptor and accessories approved by the manufacturer. Warranty voided if other adaptor or accessories are used, and danger may occur.
Avoid high volume which may damage hearing. BenQ Corporation assumes no responsibility for the loss of data due to damage of device, repair of device and/or battery replacement. Users are advised to back up all data on other storage device. Use of device not in accordance with the instructions (such the cautions) will void the warranty.

<Memo>

Contents
Contents...1 Thank you for using BenQ Joybee 125 MP3 Player! 1
Introduction...1 Package content..2 System requirements...3 Description and function of different parts..4 Screen...8

Getting started...11

Charging the battery..11 Installing drivers and software..13
Using BenQ Joybee 125 MP3 Player.15
Turning the power switch on and off..15 Transferring files to Joybee 125..16 Transferring files with Windows File Manager.16 Transferring files with QMusic..17 Description of QMusic main screen.. 17 Adding music on an audio CD to Joybee 125. 20 Adding new files to Joybee 125 from a PC.. 25 Updating files automatically with QMusic.. 29 Function menu...33 Launching to the function menu.33 Button functions in menu mode.34 Playing a MP3/WMA file...34 Playing an file..34 Operating Joybee 125 when a file is being played..35 Pause a playing file.. 35 Fast forward... 35 Next file.. 35 Rewind... 35
Previous file... 35 Stop... 35 Adjusting volume... 35 Selecting an EQ mode.. 36 Selecting repeat mode.. 36 Locking buttons... 36 Repeat playing a selected section.. 36 Listening to FM radio...38 Operating Joybee 125 when listening to FM radio.38 Muting/resuming a radio program.. 38 Changing the station... 38 Saving a channel... 39 Deleting a channel.. 39 Scanning channels.. 39 Adjusting radio volume.. 39 Changing to another mode... 40 Recording a FM program.. 40 Playing an FM file...40 Operating Joybee 125 when playing an FM file. 41 Recording with Joybee 125..43 Playing a recorded file...44 Operating Joybee 125 when playing a recorded file. 44 Selecting a repeat mode..46 Turn backlight ON/OFF...47 System setup..47 Adjusting volume..47 Selecting an EQ mode...48 Deleting a file or recording..49 Checking battery status...52 Checking memory status..53 Adjusting screen brightness..54 Playlist...55 Creating a playlist with QMusic.. 55 Running playlist... 56

Joybee 125 as a flash disk...57 Connecting Joybee 125 to a PC..57 Disconnecting Joybee 125 from a PC..58 Updating firmware and formatting memory.60 Updating firmware...60 Formatting memory...63
Troubleshooting...65 Service..66
Thank you for using BenQ Joybee 125 MP3 Player!

Introduction

Thank you for purchasing BenQ Joybee 125 MP3 Player! BenQ Joybee 125 offers outstanding playback and recording functions at low power consumption*. You may download any legal MP3 files from the Internet or convert music from an audio CD into MP3 files with QMusic that comes with Joybee 125 and save them on Joybee 125. Moreover, the seven built-in EQ modes on Joybee 125 allow you to enjoy music at the best sound quality. In addition to a MP3 player, Joybee is a FM radio and a recorder. Its screen is designed to use clod light display and its firmware can be updated from a PC. Joybee 125 not only enriches your musical life but also allows you to carry your data everywhere. Its convenient driver-free plug and play function allows you to use it as a USB flash disk on Windows 2000/XP. In this manual, you will find detailed descriptions and instructions of every function on Joybee 125. Please read carefully in order to use these convenient functions and enjoy high quality music with Joybee 125.
When batteries are fully charged, Joybee 125 offers about 10 hours of continuous replay time for MP3 music. Of course, the exact replay time is subject to the condition of battery, operation frequency and format of files being played.
Thank you for using BenQ Joybee 125 MP3 Player! 1

Package content

Please check the content of your Joybee 125 MP3 Player. Should any accessories be missing or damaged, please contact your dealer immediately.
BenQ Joybee 125 MP3 Player

Belt Clip

Earphones

USB cable

Neck Strap Software CD Warranty Card
Charger and plug (Output: 5V---300mA)
2 Thank you for using BenQ Joybee 125 MP3 Player!

System requirements

If you want to install QMusic on a PC to convert music on an audio CD into MP3 files for use on Joybee 125 or use Joybee 125 as a flash disk, your PC must comply with the following requirements: OS: Microsoft Windows 98/2000/Me/XP (QMusic supports Windows 2000/XP) CPU: Pentium 200MHz or faster I/O port: USB Device: CD-ROM Hard drive: 40MB or more space Memory: 32MB or more

Thank you for using BenQ Joybee 125 MP3 Player! 3
Description and function of different parts
Description and function of different parts of BenQ Joybee 125 MP3 Player, please see bottom pictures and tables for details.

Buttons and jacks

(11) (6) (5) (4) (3) (1) (8) (9) (10)
4 Thank you for using BenQ Joybee 125 MP3 Player!
Item Description (1) (2) Earphone jack
Functions For connection with earphones When Joybee 125 is turned off, press button once to turn on Joybee 125. After the welcome note is displayed, Joybee 125 will enter into the MP3/WMA mode automatically. If there are files on Joybee, the title of these files will display on the screen. After turning on Joybee 125, press and hold button for about 3 seconds, the message System Off will display on the screen before the power goes off. Press button once to launch to the function menu After turning on Joybee 125, and press button again to launch to the submenu in playback mode.

(repeat/ backlight)

Press button once to enable or disable repeat in playback mode. After turning on Joybee 125, press and hold button for about 2 seconds to turn backlight on/off. When listening to FM radio, press button once to record a FM radio program.
Thank you for using BenQ Joybee 125 MP3 Player! 5

(Previous/ Fast Rewind)

Press button once to skip to the previous file in MP3/WMA, Voice Playback, FM File Playback or standby mode. Press and hold button to rewind file in playback mode. Press button once to scroll back to the previous item in menu mode. When listening to FM radio, press button once to skip to the previous channel. Press and hold button for two seconds to search for the previous station in FM Radio mode. Press button once to skip to the next file in MP3/WMA, Voice Playback, FM or standby mode. Press and hold button to forward file in playback mode. Press button once to scroll to the next item in menu mode. When listening to FM radio, press button once to skip to the next channel. Press and hold button for two seconds to search for the next station in FM Radio mode.

(Next/Fast Forward)

6 Thank you for using BenQ Joybee 125 MP3 Player!
(Play/ Pause/Stop/ Enter)
Press button once to play an file in MP3/ WMA, Voice Playback, FM File Playback or standby mode. Press button once to pause an file and press again to continue playing in playback mode. Press and hold button for about 2 seconds to stop playing or recording. In FM Radio mode, press button once to play FM radio. Press button again to stop playing FM Radio. USB port for connecting Joybee 125 to a PC Charger socket for recharging battery.

USB port/ charger socket

(8) (9)
Recharge Switch Switch to On to charge, and switch to Off to stop charging. MIC High sensitivity built-in MIC for voice recording Display player status and file information. See the following section for details. For hanging various pendent accessories. Restarts Joybee 125. Press Reset when Joybee 125 does not respond or to return all settings to default.

(10) Screen (11) Hook (12) Reset button
Thank you for using BenQ Joybee 125 MP3 Player! 7

Screen

The following table shows the icons displayed on the screen and their meanings. (1) (3) (2) (4) (6) (5)
(8) (7) Item Description (9) (10) (11)
(1) The icon appears when Joybee 125 is playing an file in MP3/ WMA, Voice Playback, or FM Radio mode. (2) The icon appears when the playing is paused. (3) The icon appears when a file is being played in Voice Playback mode. (4) This icon and the icon in (5) appear at the same time when the repeat single function is enabled. This icon and the icon in (6) appear at the same time when the repeat all or random function or playback mode is enabled. (7) The icon appears when Joybee 125 is in Voice Playback mode. (8) The icon appears when Joybee 125 is in MP3/WMA mode. (9) Displays file information and player status. In Menu mode: 1: Menu Menu options
8 Thank you for using BenQ Joybee 125 MP3 Player!
(9) File information displayed in MP3/WMA mode:

filename.mp3

Total file playing time

Battery status

Information displayed when playing an file in MP3/WMA mode:

0:04 / 4:38

Current file title Battery status Elapsed playing time
File information displayed in Voice Playback mode: Total file V001.WAV 0:28 playing time Filename Battery status Information displayed when playing a file in Voice Playback mode:

V001.WAV

Total file playing time Filename Battery status Elapsed playing time

0:28 / 4:38

File information displayed in FM File Playback mode:

F001.WAV

Filename Battery status
Information displayed when playing a file in FM File Playback mode: Total file F001.WAV 1:27 / 14:38 playing time Filename Battery status Elapsed playing time
Thank you for using BenQ Joybee 125 MP3 Player! 9
Information displayed in FM Radio mode:
Current channel (expressed in MHz) Information displayed in FM or Voice recording mode:

0:15 4:38

Filename
Elapsed recording time Total recording time

(10) Displays current file or function. When appears, it means the item displayed is the last option/file. When appears, it means the item displayed is the first option/file. (11) The icon appears when Repeat A-B function is enabled.
10 Thank you for using BenQ Joybee 125 MP3 Player!

Getting started.

Charging the battery
1. Turn the Recharge On/Off switch to On before recharging the battery. 2. Install the plug to the charger as shown in the bottom picture.
3. Please make sure that plug is properly installed to the charger before connecting it to the socket. 4. Connect charger to a wall outlet. The red indicator on charger will illuminate. In about 3.5 hours, the indicator will turn into amber. In about 4 hours, the indicator will turn into green and the charging process is about to complete. In about 4.5 hours, the battery will be fully charged. 5. Joybee 125 battery charges both by USB cable and charger. You can plug Joybee 125 directly to your computer or with an extension USB cable to start charging, or you can do so with a charger.

Getting started. 11

Please check the status of charging from the color changes of indicator. Chargers for use in some areas may not have an indicator. Please check battery status according to"Checking battery status" p.52. The life of battery will depend on the frequency of charge, and more frequently the battery is recharged, the shorter the replay time of device will be. It is a normal phenomenon and not a manufacturing defect of battery.
Exact charging time differs according to battery status.

12 Getting started.

Installing drivers and software
Put the Software CD that comes with Joybee 125 in the CDROM on your PC. The installation menu will display on the PC screen in a few seconds.
If it does not appear on the PC screen, open File Manager in Windows and locate the autorun.exe file on the Software CD. Double click the icon to open the installation menu.
Click on the icon to install the corresponding software. Follow the on-screen instructions to complete the installation. The bottom table shows the functions and content of software on the Software CD. Description The driver includes Joybee 125 firmware upgrade and memory quick format utilities. If you are using Windows 98, you must install this driver before connecting Joybee 125 to your PC.
Install Joybee 125 MP3 Player Driver

Getting started. 13

Install QMusic
QMusic is an easy-to-use file manager. It allows you to play an audio CD and MP3/WMA files, convert music on an audio CD into MP3 files, create playlists, create audio CDs and organize your CD albums. With QMusic, you can convert music on an audio CD into MP3 files and save them on Joybee 125, and organize and update files stored in Joybee 125. Please be noted that QMusic supports only Windows 2000/XP. No CD burning function on Windows 2000. After installing Acrobat Reader to your PC, you can read the e-manual on the Software CD.

Install Acrobat Reader

Install Windows QMusic must work with Windows Media Player 9. If Media Player you have not yet installed Windows Media Player 9 on your PC, please install it first. Install Direct X QMusic must work with Windows Direct X. If you have not yet installed Windows Direct X on your PC, please install it first.

14 Getting started.

Using BenQ Joybee 125 MP3 Player
Turning the power switch on and off
Press to turn on Joybee 125. The welcome note will appear on the screen before Joybee 125 enters into the standby mode. If you want to turn off Joybee 125, press and hold for about 3 seconds, the message System Off will display on the screen before the power goes off.
When Joybee 125 is in standby mode, it will turn off automatically when there is no action for 3 minutes to save energy (this function will be disabled when Joybee 125 is connected to a PC).
Using BenQ Joybee 125 MP3 Player 15
Transferring files to Joybee 125
Transferring files with Windows File Manager
1. Turn on Joybee 125. 2. Connect Joybee 125 to a PC. When Joybee 125 is successfully connected to the PC, a new icon Removable Disk will appear in My Computer on Windows. Also, a message read Connection completed will display on the screen of Joybee 125.
If the dialog box Windows found new hardware keeps popping up after the connection, press Next or OK to close the dialog box.
3. If you already have MP3 (.mp3) or WMA (.wma) files on your hard disk, locate them with File Manager. 4. Then, select files and draw them to the new Removable Disk. By doing so, the selected files will be transferred to Joybee 125. When files are being transferred to Joybee 125, do not disconnect
Joybee 125 from the PC when the message read Communication in progress. displays on the screen of Joybee 125. Disconnect Joybee 125 from your PC after the message read Connection completed displays on the screen. Please check if there is enough memory space on Joybee 125 before transferring files to Joybee 125.
16 Using BenQ Joybee 125 MP3 Player
Transferring files with QMusic
1. The QMusic icon will appear on Desktop after it is successfully installed. Double click the icon to open QMusic.
You may also run QMusic from StartgProgramsgQMusic2gQMusic2.

Description of QMusic main screen
Action buttons Display System buttons Search window
Right pane Feature buttons

Left panel

Playing buttons

Status bar

Features Left panel Playing buttons
Description Displays all files supported by QMusic Press button to play a selected file
Action buttons Run specific functions of QMusic
Using BenQ Joybee 125 MP3 Player 17
Status bar Feature buttons Right panel Search window System buttons Display
Displays details of files, such as total number of files and playing time Set repeat or random playing of files in playback mode Displays files selected on the left panel or media Enter the name of an file and search it Control QMusic window Displays progress of an action. For example, when an file is being played, the name, elapsed playing time and other information of the file will be displayed.
2. Turn on Joybee 125. 3. Connect Joybee 125 to a PC. When Joybee 125 is successfully connected to the PC, a new icon Removable Disk will appear in My Computer on Windows. Also, a message read Connection Completed will display on the screen of Joybee 125.
18 Using BenQ Joybee 125 MP3 Player
4. If Joybee 125 is successfully connected to the PC, the icon will appear on the left panel of QMusic, and the directories on Joybee 125 will be displayed under the icon.
Using BenQ Joybee 125 MP3 Player 19
Adding music on an audio CD to Joybee 125
1. Put an audio CD in the CD-ROM on your PC. In a few seconds, the icon will appear on the left panel of QMusic, and the files on the CD will appear on the right panel.
20 Using BenQ Joybee 125 MP3 Player
2. Select the files to be added to Joybee 125 by clicking on the box in front of the files. Then click on the icon, and
QMusic will convert the selected files into MP3 files.
Using BenQ Joybee 125 MP3 Player 21
3. After the conversion is completed, a new album will be added to the left panel of QMusic. All the files converted will be displayed in the album. Click on the album to display details of files on the right panel.

Playing an FM file

1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. When Mode appears on the screen, press.
4. When FM File Playback appears on the screen, press 5. Press and hold press or to select the desired FM file and to confirm and start playing the file.
40 Using BenQ Joybee 125 MP3 Player
Operating Joybee 125 when playing an FM file
When a file is being played, press to play the file again, press again. to pause. If you want
When a file is being played, press to go forward.
When a file is being played, press to skip to the next file.
When a file is being played, press to rewind.
When a file is being played, press to skip to the previous file. for about 2
When a file is being played, press and hold seconds to stop playing.
1. When a file is being played, press 2. Press or to adjust volume. Press to increase volume. 3. Press to confirm adjustment and the FM File Playback screen. and then to reduce and to return to.
You may also adjust volume in System Setup. See "Adjusting volume" p.47 for details.
1. When a file is being played, press 2. Press or to scroll to EQ and press.
Using BenQ Joybee 125 MP3 Player 41

3. Press

to select a desired EQ mode (mega base, trem to
ble, rock, jazz, classical, pop or normal) and press confirm. 4. Press to return to the FM file playback screen.
You may also adjust volume in System Setup. See "Selecting an EQ mode" p.48 for details.
1. When a file is being played, press 2. Press 3. Press or or. to confirm. to scroll to Repeat and press
to select a desired repeat mode (repeat all, for several times to return to the FM file play-
repeat one, random or normal) and press 4. Press back screen.
You may also set the repeat mode in function menu. See "Selecting a repeat mode" p.46 for details.
1. When a file is being played, press 2. Press or to scroll to Lock and press. to confirm.
42 Using BenQ Joybee 125 MP3 Player
Recording with Joybee 125
Do not turn on backlight while recording to avoid noise in

recording.

Do not turn off Joybee 125 or connect or disconnect it from a PC

while recording.

Recording function will be disabled when the battery is low. 1. Turn on Joybee 125. 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. Press or to scroll to Recording, and press confirm and start recording. to
4. Press and hold for two seconds and then release the button to stop recording.
All recordings will be saved in the format V001.WAV, V002.WAV, V003.WAV etc, the number appearing in the end of the filenames refers to the order to recordings. These files will be saved under the MicIn folder in Joybee 125.

Using BenQ Joybee 125 MP3 Player 43

Playing a recorded file

4. When Voice Playback appears on the screen, press 5. Press and hold press or to confirm and start playing the file.
to select the desired recording and
Operating Joybee 125 when playing a recorded file
44 Using BenQ Joybee 125 MP3 Player
1. When a file is being played, press 2. Press or to adjust volume. Press to increase volume. 3. Press to confirm adjustment and the Voice Playback screen.

and then to reduce and

to return to
You may also adjust volume in System Setup. See "Adjusting volume" p.41 for details.
1. When a file is being played, press 2. Press 3. Press or or to scroll to EQ and press. to
ble, rock, jazz, classical, pop or normal) and press confirm. 4. Press to return to the Voice Playback screen.

Selecting a repeat mode

to select a desired repeat mode (repeat all, for several times to return to the Voice Play-
You may also set the repeat mode in function menu. See Selecting Repeat Mode for details.
1. When a file is being played, press.
Using BenQ Joybee 125 MP3 Player 45
to scroll to Lock and press

to confirm.

1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. Press 4. Press or or to scroll to Repeat, and press. to confirm.
r to select a desired repeat mode (repeat all,
46 Using BenQ Joybee 125 MP3 Player

Turn backlight ON/OFF

After turning on Joybee 125, press and hold seconds to turn on backlight. Press and hold seconds again to turn off backlight. for about 2 for about 2
Do not turn on backlight while recording to avoid noise in recording.

System setup

1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. Press 4. Press reduce and 5. Press Press menu. or to scroll to System Setup and press to launch to the Volume screen. Press to increase volume. to confirm adjustment. for several times to return to the function to.

keyboard, and click on the last file with the left button of the mouse.
6. Then, press the Delete key on the keyboard to delete all selected files from Joybee 125.
Using BenQ Joybee 125 MP3 Player 51

Checking battery status

1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. Press 4. Press press or or. to scroll to System Setup and press to scroll to Check Battery Status and.
5. The status of battery will be displayed on the screen as shown in the bottom table. Icon Battery status Full Low Recharge needed Press for several times to return to the function menu.
52 Using BenQ Joybee 125 MP3 Player

Checking memory status

1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. Press 4. Press press Press menu. or or. for several times to return to the function to scroll to System Setup and press to scroll to Check Memory Status and.
5. The status of memory will be displayed on the screen.
Using BenQ Joybee 125 MP3 Player 53
Adjusting screen brightness
1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the function menu" p.33. 3. Press 4. Press or or to scroll to System Setup and press to scroll to Brighness and press to increase brightness. to reduce.
5. The brightness adjust screen will appear. Press brightness or 6. Press Press to confirm.
for several times to return to the function menu.
54 Using BenQ Joybee 125 MP3 Player

Playlist

In addition to playing MP3/WMA files stored in the memory in order, Joybee 125 has been equipped with the playlist function which allows you to play files in an order as you desire.
Creating a playlist with QMusic
1. Double click the QMusic icon on Desktop.
2. Turn on Joybee 125. 3. Connect Joybee 125 to the PC. When Joybee 125 is successfully connected to the PC, a new icon Removable Disk will appear in My Computer. Also, a message read Connection Completed will display on the screen of Joybee 125.

58 Using BenQ Joybee 125 MP3 Player
4. When the bottom dialog box appears on the screen, press OK and disconnect Joybee 125 from the PC.
Do not disconnect Joybee 125 from a PC when the message read Communication in progress. displays on the screen of Joybee 125. Disconnect Joybee 125 from a PC after the message read Connection completed Operation procedure may differ from one OS to another.
Using BenQ Joybee 125 MP3 Player 59
Updating firmware and formatting memory

Updating firmware

If your Joybee 125 does not work properly due to firmware damage, you may update the firmware of Joybee 125 with the tool that comes with the device.
Please make sure that you have backed up all files on Joybee 125 before updating the firmware.
1. Make sure Jobee 125 is turned off. 2. Connect Joybee 125 to PC. 3. Press Start, Programs (or all programs), BENQ Joybee 125 MP3 Player, JoyBee Firmware Update from Windows. The bottom dialog box will appear on the PC screen.
4. Press and hold on Joybee 125 for about 10 seconds. If Joybee 125 is successfully connected to the PC, the connection progress will be displayed on the PC screen.
60 Using BenQ Joybee 125 MP3 Player
5. When the dialog box disappears, the Joybee Firmware Update main menu will on the PC screen.
6. Press Start and the bottom dialog box will appear on the screen. Press Yes to start firmware update.
Do not disconnect Joybee 125 from the PC while firmware update is in progress.
Using BenQ Joybee 125 MP3 Player 61
7. Press Close when firmware update is completed.
9. Then, disconnect Joybee 125 from the PC and turn it on.
If firmware update fails, disconnect Joybee 125 from the PC USB port, and press the Reset button. Then follow steps 1 to 7 again to update the firmware.
62 Using BenQ Joybee 125 MP3 Player

Formatting memory

You can perform quick format of the memory on Joybee 125 with the memory formatting tool that comes with Joybee 125. Do not disconnect Joybee 125 from the PC when format is in

progress.

All data including files, files and directories on Joybee 125 will be
removed after formatting.
1. Turn on Joybee 125. 2. Connect Joybee 125 to the PC. 3. Press Start,Programs (or all programs), BENQ Joybee 125 MP3 Player, JoyBee Format Utility from Windows. The bottom dialog box will appear on the PC screen.
Using BenQ Joybee 125 MP3 Player 63
4. Press Start to start formatting Joybee 125.
5.Press Close to end task after format is completed.
You may format Joybee 125 from Windows. However, make sure that you do not format it in FAT32 or NTFS format.
64 Using BenQ Joybee 125 MP3 Player

support@benq.de N/A support@benq.it support@benq.co.uk support@benq.es support@benq.at service@medisoft.cz serwis@itus.pc

66 Service

USA Los Angeles America Mexico Chile The United Arab Emirates Iran Middle East Kuwait Yemen Qatar Saudi Arabia
+305-593-5250 888-723-2238 01-800-712-7745 562-399-5000
compumex@fdr.com BenqCS.us@benq.com support.latinamerica@be nq.com rcox@vector.cl

+971-4-2825767

DhirajManghnani@benq.com

Service 67