P50 PDA Phone Users Manual

Welcome

Copyright
Copyright 2005 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.

Sidebar Signs

Text set off in this manner indicates a note. A note will elaborate the current topic with further information or mention something a little off topic. Text set off in this manner indicates a warning. Failure to follow the said warning could result in damage to equipment or loss of information. Text set off in this manner indicates a tip. A tip will recommend an action which helps you better use the product.

ii Copyright

Safety Information
For your safety, please read the guidelines below carefully before you use your phone:
Exposure to radio frequency signals
Your wireless handheld portable telephone is a low power transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. European and international agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy. International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Verband Deutscher Elektringenieure (VDE) DIN- 0848 Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy National Radiological Protection Board of the United Kingdom, GS 11, 1988 American National Standards Institute (ANSI) IEEE. C95.1- 1992 National Council on Radiation Protection and Measurements (NCRP). Report 86 Department of Health and Welfare Canada. Safety Code 6 These standards are based on extensive scientific review. For example, over 120 scientists, engineers and physicians from universities, government health agencies and industry reviewed the available body of research to develop the updated ANSI Standard. The design of your phone complies with these standards when used normally.
RF Exposure Information (SAR)
This model phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at

Safety Information iii

its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.449 W/kg (GSM850) / 0.282 W/kg (PCS1900) / 0.475 W/kg (WLAN) and when worn on the body, as described in this user guide, is 0.642 W/kg (GSM850) / 0.784 W/kg (PCS1900) / 0.16 W/ kg (WLAN). (Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC ID: JVP57P50. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on.

Other medical devices

If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted facilities

Turn your phone OFF in any facility where posted notice so requires.

Aircraft

FCC regulations prohibit using your phone while in the air. Switch OFF your phone, or change to the Flight mode before boarding an aircraft.

Blasting areas

To avoid interfering with blasting operations, turn your phone OFF when in a blasting area or in area posted TURN OFF TWO-WAY RADIO. Obey all signs and instructions.

vi Safety Information

Potentially explosive atmospheres
Turn your phone OFF and do not remove the battery when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks, from your battery, in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
For vehicles equipped with an air bag
An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

FCC information

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ii Table of Contents

MSN Messenger... 35 Pocket Excel.... 35 Pocket Word.... 35 Universal Remocon... 35 SIM Phonebook... 36 SIM Message.... 36 SIM Tool Kit.... 36 Windows Media... 37 Calculator.... 37 Tasks.... 37 Photo Caller ID.... 37 Set Ringtone.... 37 Notes..... 38 Find.... 38 Pictures.... 38 Speech Commander.... 38 File Explorer.... 39
Camera/camcorder operation.. 40
Taking photographs.... 40 Recording motion videos... 42
Browsing your picture and video folders..43
Viewing your pictures and videos.. 44 Editing your pictures and video frames... 45 Settings menu.... 46

Connectivity... 47

Types of connections... 47 Setting up connections... 47
Setting up a GPRS and CSD Connection to your ISP... 47 Connecting to Your ISP... 53

Table of Contents iii

Configuring Proxy Server Settings... 53 Setting up a VPN connection to your corporate network.. 54
Using Wireless LAN.... 55
Turning on WLAN.... 55 Connecting to an existing wireless network.. 56 Adding a new wireless network... 57 Searching for wireless networks to access... 58
Using Bluetooth... 58 Using Infrared (IrDA)... 59
Microsoft ActiveSync.. 60 ActiveSync..
Installing ActiveSync on PC... 60 Creating a new partnership profile... 65 Synchronizing the application data... 66 Adding programs.... 67 Removing programs.... 67
Settings.... Settings.... 68

Personal settings.... 68

Phone.... 68 Buttons..... 68 Input.... 69 Menus.... 69 Owner info.... 69 Password.... 70 Sounds and notification... 70 Today..... 70 Speech Commander.... 71

System settings... 71

About..... 71 Backlight..... 71 Certificates.... 71 Clock..... 72

iv Table of Contents

Memory.... 73 Power..... 73 CPU Performance... 73 Regional settings.... 74 Screen.... 74 Self Test.... 74 Device Info.... 74 Remove Programs.... 74
Connections settings... 75
GPRS Authentication.... 75 Network Cards..... 75 Connections.... 75 Bluetooth.... 75 Beam.... 75
Troubleshooting Information.. 76
Call Related Problems... 76 Message Problems.... 77 Internet Problems... 78 Connection Problems... 78 System Problems.... 78

Table of Contents v

<Memo>

vi Table of Contents

Phone exterior

Front view

Ear Piece Listen during phone call

Power indicator (See "Description of the indicators" on page 2 for more information) Connection indicator (See "Description of the indicators" on page 2 for more information) Joystick - Shift to move selection highlight in an application - Press to make a selection
LCD Touchscreen - Show screen display - Tap and write on touchscreen
Left application key Press to launch Contacts (default setting). You can also customize the application it opens
Send Key - Press to pick up incoming calls - Press to bring up Dial screen - Press to place a call after dialing -Long press to activate/deactivae loudspeaker QWERTY Keyboard Type text and enter numbers with ease Functio Key
Right application key Press to launch Calendar (default setting). You can also customize the application it opens End Key - Press to reject incoming calls - Press to bring up Today screen

Microphone

Phone exterior 1
Description of the indicators
Indicator Color Lighting Behavior Flash On Flash On On Flash Flash Description Indicates that a new event (new message, a new missed call, system warning., etc.) occurs (indicated by the appearance of certain icons on the Navigation bar) Charging in progress. The PDA phone is in stand-by mode. Charging is complete. The battery is completely drained. Indicates that the wireless LAN function has been enabled. Indicates that the Bluetooth function has been enabled. Indicates that the wireless LAN and Bluetooth functions have both been enabled.
Red Power indicator Green Orange Green Network indicator Blue
Green/Blue Alternating Flash

2 Phone exterior

Top view
Power Button Press to power on/off
Infrared Window Sends and receives infrared signals Stylus Device for tapping and writing on the touchscreen Stylus Housing Storage area for stylus

Bottom view

Reset Button Insert a pin into the recess to trigger the reset button

X ELS PI

DI I G T A
SD Card Slot Allows you to insert an SD memory card
Battery Charger Socket Insert the battery charger plug here

Phone exterior 3

Left-side view
Audio Recorder Button Press to record audio
Sound Level Buttons Press to adjust speech and device volume levels

Right-side view

Camera/Camcorder Key Press to launch Camera/Camcorder mini-USB socket Insert data cable here Headset Jack Allows you to connect to a headset

4 Phone exterior

Rear view

3 M EG A PI XE 1. LS

ZO O M TA L F2 GI. I 8
Camera Lens Aim camera lens at objects of interest when using camera/camcorder
Loudspeaker Generates ring and device audio
SIM Card Socket Allows you to install a SIM card 2nd SIM Card Storage Compartment Extra storage space available for a second SIM card Battery lock Locks the battery
Battery Latch Press to release battery

Phone exterior 5

The PDA phone will automatically go into sleep mode if it is inactive for 1 minute. You can also customize the length of inactivity before sleep mode.

Soft reset

A soft reset restarts the PDA phone but does not erase any program data or system settings. To perform a soft reset: 1. Locate the recessed Reset button at the bottom of the phone. 2. Insert the stylus into the recess to trigger the Reset button. Hold the Reset button down until the screen fades off. 3. Release the stylus from the Reset button to restart the phone.

Startup 13

Hard reset
A hard reset restarts the PDA phone and erases all program data and system settings.
After a hard reset, your phone returns to its default settings and loses all information that is not recorded in ROM.
To perform a hard reset: 1. Locate the recessed Reset button at the bottom of the phone. 1. Press and hold down the Power button. 2. Without removing the Power button, insert the stylus into the recess to trigger the Reset button. Hold down both the Power button and the Reset button until the screen fades off. 3. When the screen has faded off completely, release both the Power button and the stylus. 4. You will notice the Power indicator light up green, at this point, press the Power button to turn ON the PDA phone.

14 Startup

Today screen
The Today screen is the home screen of your PDA phone. You will enter the Today screen after youve completed the first-time startup procedure. You can use the Today screen to view the following information: Date and time Owners information Unread and unsent messages Upcoming appointments Tasks that need to be completed The follow figure shows the various components on the screen.
Start Button Navigation Bar

Program Window

Menu Bar

Today screen 15

Navigation bar
The navigation bar is located at the top of the screen. It contains the Start button, various system icons, the clock, and (if you have an application open) the OK or X button to close the application window. The following figure shows the various components of the navigation bar.

Start Button

Program Name

System Icons

The following describe some of the icons on the navigation bar.

Icon Meaning Adjust the sound on your phone or the sound of your ring tone. Backup battery is low. Main battery is charging. Main battery is low. Main battery is very low. Main battery is full. Notification that one or more MSN instant messages were received. Notification that one or more e-mail or SMS messages were received. ActiveSync is active.

Menu bar

The menu bar is located at the bottom of the screen. It contains menu names (related to the currently opened application), the Input Panel (if the currently opened application requires text input), and several indicator and shortcut icons such as Wireless LAN, Blue16 Today screen
tooth, rotate, battery life indicator, USB cable connection. The following figure shows the various components of the menu bar.

Menu Name

Indicator and Shortcut Icons
The following describe some of the icons on the menu bar.
Icon Meaning Indicates that the USB data cable is connected between the phone and PC. Tap this icon to rotate the screen counter-clockwise. Indicates Bluetooth connection status (the red X indicates Bluetooth is currently off). Indicates wireless LAN connection status (the red X indicates wireless LAN is currently off). Indicates battery status. Indicates that an alarm clock has been set. You can also tap this icon to set alarm.

Today screen 17

Start button
The Start button is located on the navigation bar. When you tap the Start button, the Start drop-down menu appears showing a list of applications and utilities. The figure below shows the various components of the Start menu.

User Programs

Most Recently Used Programs

System Folders

You can customize which applications appear on the Start menu by changing the values in Settings. Settings Please see Chapter 11 Settings for further information.

18 Today screen

Input methods
The PDA phone has a number of input method choices to choose from. When using the phone function, simply use the QWERTY keyboard to enter the phone number then press the Send key. When using an application that supports text input, you have the option of using the QWERTY keyboard or choosing from a number of soft input methods from the Input Panel to enter typed text. The stylus is available as a point and click device for navigation. Finally, you can use the stylus to handwrite or make drawings (for certain applications that support this) and have the results saved as graphics. For example, in the Notes application, you can literally scribble notes on the touchscreen and save it to a file.

Writing on the screen

In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you've written and convert the information to text at a later time. Open an application like Notes and tap the Pen button to switch to writing mode. This action displays lines on the screen to help you write.

Input methods 21

Selecting a sentence
If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Tools > Undo and try again. You can also select text by tapping the Pen button to deselect it and then dragging the stylus across the screen. You can cut, copy, and paste written text in the same way you work with typed text: tap and hold the selected words and then tap an editing command on the pop-up menu, or tap the command on the Edit menu.
Converting writing to text
Tap Tools > Recognize Recognize. If you want to convert only certain words, select them before tapping Recognize on the Tools menu (or tap and hold the selected words and then tap Recognize on the pop-up menu). If a word is not recognized, it is left as writing. If the conversion is incorrect, you can select different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. A menu with a list of alternate words appears. Tap the word you want to use, or tap the writing at the top of the menu to return to the original writing.
Tips for getting good recognition: Write neatly. Write on the lines and draw descenders below the line. Write the cross of the t and apostrophes below the top line so that they are not confused with the word above. Write periods and commas above the line. For better recognition, try increasing the zoom level to 300% using the Tools menu. Write the letters of a word closely and leave big gaps between words so that the device can easily tell where words begin and end. Hyphenated words, foreign words that use special characters such as accents, and some punctuation cannot be converted. If you add writing to a word to change it (such as changing a 3 to an 8) after you attempt to recognize the word, the writing you add will not be included if you attempt to recognize the writing again.

22 Input methods

Drawing on the screen
You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot.

Creating a drawing

Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing.
You may want to change the zoom level so that you can more easily work on or view your drawing. Tap Tools and then a zoom level.

Selecting a drawing

If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To multiple drawings, deselect the Pen button and then drag to select the drawings you want. You can cut, copy, and paste selected drawings by tapping and holding the selected drawing and then tapping an editing command on the pop-up menu, or by tapping the command on the Edit menu. To resize a drawing, make sure the Pen button is not selected, and drag a selection handle.

Input methods 23

The PDA phone contains features you would expect from a high-end mobile phone. You can use your PDA phone to make and receive phone calls and send and receive SMS (Short Message Service) and MMS (Multimedia Message Service) messages. Your mobile phone service provider may provide other useful services such as voice mail.

Phone screen

Press the Send key to bring up the Phone screen as follows.
Making and receiving phone calls

Making a call directly

In the Phone screen, tap the number you want to call then tap the Send key to place a call. (Alternatively, you can enter the number by typing on the QWERTY keyboard.)

24 Phone operation

To clear a wrong number, either press the delete button on the keyboard, or tap the button on the touch screen.

Answering a call

When you receive a phone call, the phone rings or vibrates and a message will appear on the screen. Press the Send key to answer the call. (Alternatively, you can cancel the call and ringing by pressing the End key.)

Page 40 Page 35 Page 36 Page 36 Page 36 Page 37 Page 37 Page 37 Page 37 Page 37 Page 38 Page 38
A JPEG viewer for viewing digital Page 38 pictures Allows you to use your voice to control applications View files and folders in the phone Page 38 Page 39
You can find help on most of these applications on Start > Help.

30 Programs

Calendar
Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Day, Week, Month, and Agenda) and set Calendar to remind you of appointments with sound or other methods. To launch Calendar, press the Right soft-key or tap Start > Calendar Calendar.

Contacts

Contacts maintains a list of your friends and colleagues so that you can easily find the information youre looking for, whether youre at home or on the road. You can enter both personal and business information. If you want to add a contact to your SIM card, please refer to "SIM Phonebook" on page 36. To launch Contacts, press the Left soft-key or tap Start > Contacts Contacts.

Pocket Internet Explorer

You can use Pocket Internet Explorer to view Web pages on your PDA phone in two ways: by downloading pages through sychronization or by connecting to the Internet. While browsing, you can also download new files and programs to your PDA phone from within the Internet. You can also view WAP pages in Pocket Internet Explorer. To launch Pocket Internet Explorer, tap Start > Internet Explorer. Explorer

Messaging

You can receive Internet e-mail, multimedia, and text messages in Messaging. Internet email messages are sent by using an address you receive from your Internet Service Provider (ISP). Text and multimedia messages are sent and received through your mobile phone service provider by using a phone number as the message address.Before sending a multimedia message, you have to finish MMS settings. To launch Messaging, tap Start > Messaging Messaging. Please follow the below procedures to finish the MMS setting.

SIM Message

SIM Message displays the SMS messages stored on your SIM card. The messages in SIM Message are separate from the messages in Messagings SMS Inbox. The messages in Messaging are stored in your PDA phones ROM memory area whereas the messages in SIM Message are stored in the SIM card. You can copy data from SIM Message to Messaging by checking off the items in display and select Copy. Tap INBOX SMS to see what messages are in Messaging. To launch SIM Message, tap Start > Programs > SIM Message Message.

SIM Tool Kit

STK (or SIM Tool Kit) allows you to use the STK services provided by your carrier as part of your subscription. To launch STK, tap Start > Programs > SIM Tool Kit Kit.

36 Programs

Windows Media
You can use Microsoft Windows Media Player to play digital audio and video files that are stored on your device or on a network such as on a Web site. To launch Windows Media Player, Start > Programs > Windows Media Media.

Calculator

Much like Calculator is a staple on the PC, you have it on your PDA phone. To launch Calculator, tap Start > Programs > Calculator Calculator. If an error message appears while you are using the Caculator function, please press the function key twice and then tap the C button on the screen to erase the error message.
Use tasks to keep track of things you need to do. You can use categories to help you organize your tasks and set reminders for them. To launch Tasks, tap Start > Programs > Tasks Tasks.

Photo Caller ID

Photo Caller ID allows you to assign a photo picture to a caller in your phonebook. After you have assign a photo to a caller, whenever you now receive a call from this caller, you will see this photo show up on the display. This is a nice feature to personalize the callers in your phonebook and see at a glance who is calling you from the picture on the display. To launch Photo Caller ID, tap Start > Programs > Tasks Tasks. Please note that the picture you use for Photo Caller ID function must be less than 64k.

Set Ringtone

Set Ringtone allows you to assign a music file for your phones ringtone. You can choose a file from what is available on the system, or you can upload a file of your own. Set Ringtone supports the following music file types: MIDI, Karaoke, Extensible Music,

Programs 37

SMAF, Sound, and MP3. When you assign a music file as a ringtone, your PDA phone will copy the file to the following directiry: Windows/Rings. If the free memory left in your PDA phone is less than 5 MB, a warning message appears and you are not able to set the ringtone. To set the ringtone, delete the undesired files in the Rings folder. To launch Set Ringtone, tap Start > Programs > Set Ringtone Ringtone.
Notes helps you quickly capture your ideas, notes, and thoughts. You can create a note using written and typed text, drawings, and recordings. You can also share your notes with others through e-mail, infrared, and synchronization with your PC. To launch Tasks, tap Start > Program > Notes Notes.
Use Find to find a file or item in your PDA phone. Enter the name of the file or item and select its data type and tap Go. The matched results will be listed on the screen. To launch Find, tap Start > Programs > Find Find.

Pictures

Use Pictures to view JPEG pictures stored on your PDA phone or on a storage card, send pictures to others, view a slideshow of your pictures, or set a picture as the background on the Today screen. To launch Tasks, tap Start > Programs > Pictures Pictures.

Speech Commander

Speech Commander allows you to control your PDA phone by voice. You can use voice to make a phone call, look up contact persons information or start a program. To launch Tasks, tap Start > Programs > Speech Commander. Commander

38 Programs

File Explorer
Use File Explorer to browse what files and folders are in your PDA phone. Once you find a file you are interested, tap on it to open it up in its associated application. To launch File Explorer, tap Start > Programs > File Explorer Explorer.

Programs 39

Camera/camcorder operation
The PDA phone has a built-in camera/camcorder which allows you to take photographs and record video clips. In addition, the associated Pocket Studio application provides features for browsing, viewing, and editing your image files.

Taking photographs

1. Press the Camera/Camcorder mode. key on the side of the phone to enter camera 2. In this mode, the screen will display the lens view in full-screen. (The lens is located on the back of the PDA phone). When you are ready to snap a picture, press the Camera/ Camcorder key or the joystick to activate the shutter. 3. The Pocket Studio program window will appear with the preview picture on the screen. You may press the Camera/Camcorder key again to start taking another picture. After youve finished taking pictures, tap anywhere on the screen to exit out of full-screen. 4. Once youve exited out of full-screen, you will see the Pocket Studio program window. This is the preview mode. In the window center, the lens view is still visible. You can still take picture at this point by pressing the Camera/Camcorder key. (Notice the various function items on the toolbar and menu bar available to you.) The Pocket Studios preview mode allows you to use the camera/camcorder to record still pictures or motion videos. The following figure shows the functions available to you in this mode.

40 Camera/camcorder operation

(1) (2) (18)

(17) (16) (15) (14) (13) (12)

(11) (10)

(4) (5) (6) (7) (8) (9)

No. Name

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Image resolution Zoom level View Tool Camera or camcorder mode Snap/Record Show/Hide toolbar Restore original Home Frame

Description

Shows the picture resolution the camera/camcorder is currently set to. Shows current zoom level. Lists available view options. Lists available tools. Toggles between camera and camcorder mode. Take a snapshot or begin recording a video clip. Toggles to show and hide toolbar. Restore adjustments you have made to brightness, contrast, scene, effects, frame back to their original settings. Helps you manage and access your image files. Add a frame to the picture from a list of frame selections.
Camera/camcorder operation 41
(11) (12) (13) (14) (15) (16) (17) (18)
Effects Zoom up Zoom down Full-screen Brightness Contrast Scene
Give the picture a stylized look; e.g., sepia, black and white, cool, aqua, negative, green. Increase zoom level by one. Decrease zoom level by one. Turn preview window to full-screen. Adjust brightness. Adjust contrast. Set scene to match current physical environment; e.g., dusk, sunlight, fluorescent, cloudy, night.
Lens preview winShows live feed from camera/camcorder lens. dow

Recording motion videos

1. To use the camcorder to record motion videos, you can either tap (while in preview mode) Tool > Mode > Camcorder or tap the icon on the toolbar to switch the icon to camcorder. 2. Press the Camera/Camcorder key to begin recording. Alternatively, you can tap the red recording button on the toolbar for the same effect. 3. While the recording is in progress, you will see the red action word REC flashing on and off as an indicator. Tap to pause the recording or to stop it altogether. The remaining icons on the toolbar are the same as they are in still picture mode. Please refer to the diagram in the previous section for further information on these similar functions.