By mean of the special production process, an individual adjustment of the shape according to your individual production is easily possible. According to the field of application (horizontal or vertical), the necessary magnetic adhesion strength can be installed. The slot- former- profile can be sawed according to the needed length. Doing this, the position of the magnetic inserts it has to be payed attention to, so that the functionability of the items will be not reduced.
BGW-Slot-former system HM12

underside mm 160

top side mm 130

height h mm 50

Gebrauchsmuster geschtzt 633.2

BGW-formwork system HM13

on customer request we dense all welds and all impacts with acrylic / silicone also galvanized available
Different profiles Produktion on customer concern
BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/90950 - Fax. 09359/1640 www.bgw-bohr.de

BGW-formwork-system HM13

The integrated Magnet-system

The comfortable solution

This formwork-system, consist of a formwork-profile (steel QSTE) with integrated magnetic tension-mechanism, which can be used in different formwork` s. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings.
Advantages of the HM13-System on one View: very leight weight simple and safe handling simple servicing due to open system Magnetic power of 900 kg, depending on Ground Surface (steel, thickness, temperatur, ruffness) changing the formwork just by removing three screws materials (Steel and Polyurethane) resistant against concrete easy to clean The Springs pull the formwork down to the Table and prevent the penetration of concrete (with 120kg per Magnet unit) Spring elements help to unlock the magnets when demoulding Non-magnetic handling knop enables to stack up the profiles
formwork system cross section
This formwork-system, consist of a formwork-profile (steel QSTE) with integrated magnetic tension-mechanism, which can be used in different formwork` s. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings. By mean of the tension-mechanism, the profile (layer is planed) is pulled to the bottom of the shuttering, so that an exactly edge of the manufactured item is managed. For the system is one unit, measuring mistakes are not possible. The easy and quick handling increases the work safety. Using the corresponding lever, the system can be taken off and removed easily from the bottom of the shuttering. By mean of the separated arrangement of tension mechanism and handle-knob, and tension mechanism and shuttering, the forces acting on the formwork and on the magnet during the concrete process are absorbed. The built-in tension elements are placed in a save position, so that the formwork-system is less sensitive against soiling. Note: Recess profiles before first using into oil! To make possible a stacking up, and to prevent that the formwork stick to each other, the knob is made out of antimagnetic material. The system can also be delivered storeroom- and robot capable. With defect the old shuttering, by remove from 3 screws, can be easily exchanged. Declining shapes and dimensions on demand.

left right left right left right
0,580 0,580 0,580 0,580 0,580 0,580
30,68 30,68 30,68 30,68 30,68 30,68
BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/1650 - Fax. 09359/1640 www.bgw-bohr.de 09/00
BGW-formwork system type HM13 length balancing 1
for ceiling plates and double wall production
This variable formwork system is used as stoppers against side-moving and is particularly suitable for production of precast concrete elements with frequently changing dimensions. By the length balancing elements available in different lengths, almost all precast elements dimensions can be produced. By the simple and control mechanism which can be handled fast, much time and also costs can be saved. The profiles can be hang in at the shuttering with the control mechanism or blind button, that they will be easy to clean. Dimensions, particularly for your production requirements, you receive on request.
Structure possibilities on production-pallet.
profile type HM13 with two magnet elements 1 gable-end with chamfers 10x45 / 1 gable-end mother or father
art.-no. chamfers without one side both sides without one side both sides gable-end mother mother mother father father father length mm weight kg price /piece on request
Length balancing element made out of PU, with and without magnet 1 gable-end mother / 1 gable-end father
art.-no. chamfers without one side both sides without one side both sides magnet without without without with with with length mm weight kg price /piece on request
end piece type HM13, with one magnet element and 1 blind button 1 gable-end with chamfers 10x45 / 1 gable-end mother
art.-no. 3882 chamfers without one side both sides length mm weight kg price /piece on request
mounting (to hang up the profile at the blind button) art.-no. 3390 DM/piece BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/1650 - Fax. 09359/1640 www.bgw-bohr.de 09/00 (05/01)
BGW-Magnet System Type HM13 - Magnetboxes
The magnet elements are including the proofed RELEASY SYSTEM HM13. The standard modules can be easily adapted to your formwork by welding or screwing.

HM13 Base Module

HM13, Power 1300kg, 2 x M 12

32021-P extra wide

32021-Ecke
HM13-magnet elements with the RELEASE SYSTEM art.-no. power length widths height remarks kg mm mm mm 32021-70 Base Module 350 kg 32021-70 Base Module 900 kg 32021-70 Base Module 1300 kg 32022-40-x Thread M12 o. M16 32022-70-x Thread M12 o. M16 32021-Ecke For fixing in edges, height column 350 mm 32021-Ecke70 For fixing in edges, height column 350 mm 32021-FBA Column (h350mm) 32021-P Nailing plate d 5mm, h 150mm

corner 90 fitting to u-profiles Height 60 mm
for: doors windows openings etc.

chamfers inside

chamfers outside

both sides chamfers

chamfers 10 x 45 none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides

side length l mm

width inside b mm

35030 35031

50 + 0,5

metal thickness d mm 3 4

for magnet HM3-
Heights 65 and 70 mm see at side 2! Different sizes you get on request.
BGW-Bohr GmbH 97854 Steinfeld Tel. 09359/1650 Fax 09359/1640 www.bgw-bohr.de 02/01
corner 90 fitting to u-profiles Height 65 und 70 mm

35094 35095

chamfers 10 x 45
none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides none none inside inside outside outside both sides both sides

metal thickness d mm

BGW- HM15

BGW-formwork-system HM15

for the production of precast elements of all kinds
The magnetic formwork border is used to form floor slabs, balcony plates, double walls, windows and door cases, wall break-throughs, openings at the garage production, etc.

art.no.

breadth mm 11 11

max. lenght: 4 mtr.

chamfer 10x45 (Standard) without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides without one side both sides

Rd 12 x 137 Rd 14 x 170 Rd 16 x 216 Rd 18 x 235 Rd 20 x 257 Rd 24 x 360 Rd 30 x 450 Rd 36 x 570 Rd 42 x 620 Rd 52 x 880 Rd 56 x 1200 Rd 60 x 1400 Rd 48 x 1300
g = min. package c x 2,5 piece

weight/ kg

0,070 0,141 0,190 0,305 0,420 0,745 1,422 2,759 3,900 5,300 10,00 14,50 13,46
0,77 0,88 1,18 1,66 2,07 2,48 4,24 7,34 11,40 28,94 34,00 42,00 36,00

0273 0218-60 0218-48

DWL waved and fixing insert, long form stainless steel
0238E 0202E 0204E 0223E 0209E 0210E 0231E 0214E 0237E 0269E
Rd 12 x 137 Rd 14 x 170 Rd 16 x 216 Rd 18 x 235 Rd 20 x 257 Rd 24 x 360 Rd 30 x 450 Rd 36 x 570 Rd 42 x 620 Rd 52 x 880

21,54 70

140 170
2,61 3,20 4,35 6,75 8,10 9,64 22,55 32,42 49,03 63,25
DWK waved end fixing insert, short form - galvaniseda
0,5 0,8 1,2 1,6 2,0 2,5 4,0 6,3 8,0
Rd 12 x 108 Rd 14 x 130 Rd 16 x 167 Rd 18 x 175 Rd 20 x 187 Rd 24 x 240 Rd 30 x 300 Rd 36 x 380 Rd 42 x 450
0,058 0,115 0,155 0,240 0,340 0,532 1,004 2,021 3,040
0,74 0,87 1,07 1,64 1,99 2,35 3,99 6,98 10,89
DWK waved and fixing insert, short form stainless steel
0250E 0207E 0254E 0255E 0257E 0260E 0261E 0263E 0266E
2,58 3,20 4,19 6,75 8,08 9,31 22,01 31,44 48,01
BGW-Bohr GmbH, 97854 Steinfeld - Tel. 09359/90950 - Fax. 09359/1640 www.bgw-bohr.de 05/10(10/07)

BGW- fixing insert

BGW- Stabanker
BGW- fixing inserts are by mean of their construction specially suitable for slender concrete units and for the installation in thin walls, like as garages, transformer stations, shaft rings, etc. Into the yellow galvanised or of stainless steel manufactured socket, a metric round thread is cut in, which should be greased before the installation into the precast concrete unit. For fastening to a steel formwork, BGW-magnetic holders model HM4 are recommended. To prevent dirt and concrete from penetrating into the thread of the socket, plastic stoppers respectively holding discs are used. The length of the Fixing insert can be changed according to your special installation case. Here you should however consider, that the load may change.
fixing insert - galvanised
art.-no. load t 0,5 0,8 1,2 1,6 2,0 2,5 4,0 4,0 6,3 6,3 8,0 12,5 model d x h Rd 12 x 190 Rd 14 x 230 Rd 16 x 250 Rd 18 x 300 Rd 20 x 350 Rd 24 x 400 Rd 30 x 500 Rd 30 x 900 Rd 36 x 650 Rd 36 x 900 Rd 42 x 800 Rd 52 x 900 D mm e mm packing unit piece price /piece 0,77 0,92 1,15 1,71 2,10 2,81 4,19 5,01 8,05 9,33 12,83 28,33
alternative: diving achievement (to transport sandwichelements)
fixing insert stainless steel
art.-no. 0100E 0102E 0104E 0106E 0108E 0112E 0116E 0118E 0181 0181-900 0124E 0126E load t 0,5 0,8 1,2 1,6 2,0 2,5 4,0 4,0 6,3 6,3 8,0 12,5 model d x h Rd 12 x 190 Rd 14 x 230 Rd 16 x 250 Rd 18 x 300 Rd 20 x 350 Rd 24 x 400 Rd 30 x 500 Rd 30 x 900 Rd 36 x 650 Rd 36 x 900 Rd 42 x 800 Rd 52 x 900 D mm e mm packing unit piece price /piece 2,61 3,24 4,32 6,8 8,13 9,97 22,5 23,32 33,13 34,41 50,46 62,64

surcharge: till Rd 24: 0,50 /piece from Rd 30: 0,75 /piece (09/06)
BGW-ripped foot anchor stainless steel
BGW- Rippenfuanker BGW-ripped foot anchor, design as BGW-fixing insert, but with a forged foot, are by mean of their construction specially suitable for slender concrete units and for the installation in thin walls, like as garages, transformer stations, shaft rings, etc.
Into socket of stainless steel, a metric round thread is cut in, which should be greased well before the installation into the precast concrete unit. For fastening to a steel formwork, BGW-magnetic holders model HM4 are recommended. To prevent dirt and concrete from penetrating Into the thread of the socket, plastic stoppers, respectively holding discs are used.
The lengths of the anchors can be changed, matching to your special installation case. Here, however, you should
consider that the maximal load may change.

BGW-ripped foot anchor

art.-no. 0470 load t 0,5 0,5 0,5 0,5 0,5 0,5 0,8 0,8 0,8 0,8 0,8 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,6 1,6 1,6 1,6 1,6 2,0 2,0 2,0 2,0 2,0 2,0 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,0 4,0 4,0 4,0 4,0 6,3 6,3 6,3 6,3 6,3 8,0 8,0 8,0 12,5 12,5 model d x h Rd 12 x 70 Rd 12 x 100 Rd 12 x 136 Rd 12 x 174 Rd 12 x 250 Rd 12 x 295 Rd 14 x 70 Rd 14 x 105 Rd 14 x 135 Rd 14 x 167 Rd 14 x 220 Rd 16 x 70 Rd 16 x 115 Rd 16 x 130 Rd 16 x 140 Rd 16 x 150 Rd 16 x 195 Rd 16 x 260 Rd 18 x 85 Rd 18 x 150 Rd 18 x 170 Rd 18 x 205 Rd 18 x 275 Rd 20 x 90 Rd 20 x 170 Rd 20 x 180 Rd 20 x 190 Rd 20 x 235 Rd 20 x 300 Rd 24 x 105 Rd 24 x 115 Rd 24 x 210 Rd 24 x 260 Rd 24 x 275 Rd 24 x 335 Rd 24 x 380 Rd 30 x 125 Rd 30 x 150 Rd 30 x 270 Rd 30 x 390 Rd 30 x 510 Rd 36 x 230 Rd 36 x 330 Rd 36 x 440 Rd 36 x 490 Rd 36 x 640 Rd 42 x 450 Rd 42 x 590 Rd 42 x 770 Rd 52 x 730 Rd 52 x 960 weight/kg 0,040 0,052 0,066 0,081 0,111 0,129 0,098 0,120 0,138 0,109 0,191 0,097 0,116 0,136 0,142 0,148 0,176 0,216 0,178 0,256 0,280 0,320 0,407 0,223 0,320 0,332 0,344 0,399 0,477 0,320 0,336 0,490 0,564 0,575 0,683 0,754 0,553 0,600 0,911 1,207 1,503 1,241 1,838 2,300 2,455 3,032 3,113 3,790 4,666 4,913 6,025 price /piece 0,74 0,77 0,78 0,81 0,87 0,90 0,92 0,93 0,95 0,98 1,02 1,10 1,12 1,13 1,14 1,15 1,18 1,28 1,33 1,42 1,46 1,48 1,64 1,64 1,82 1,85 1,87 1,94 2,22 2,30 2,32 2,45 2,56 2,64 2,97 3,08 4,29 4,40 4,55 4,70 4,86 7,88 8,39 8,99 9,20 9,92 15,85 16,87 19,43 25,82 32,72
BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/90950- Fax 09359/1640 www.bgw-bohr.de 11/06
art. no. stainless steel 0400E 0402E 0404E 0406E 0405E 0407E 0408E 0409E 0410E 0412E 0414E 0416E 0413E 0417E 0419E 0418E 0420E 0422E 0424E 0423E 0426E 0428E 0430E 0432E 0437E 0439E 0434E 0436E 0438E 0440E 0441E 0442E 0444E 0445E 0446E 0447E 0448E 0449E 0450E 0452E 0454E 0455E 0456E 0457E 0458E 0460E 0462E 0464E 0466E 0468E 0470E

load t 0,5 0,5 0,5 0,5 0,5 0,5 0,8 0,8 0,8 0,8 0,8 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,6 1,6 1,6 1,6 1,6 2,0 2,0 2,0 2,0 2,0 2,0 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,0 4,0 4,0 4,0 4,0 6,3 6,3 6,3 6,3 6,3 8,0 8,0 8,0 12,5 12,5
model d x h Rd 12 x 70 Rd 12 x 100 Rd 12 x 136 Rd 12 x 174 Rd 12 x 250 Rd 12 x 295 Rd 14 x 70 Rd 14 x 105 Rd 14 x 135 Rd 14 x 167 Rd 14 x 220 Rd 16 x 70 Rd 16 x 115 Rd 16 x 130 Rd 16 x 140 Rd 16 x 150 Rd 16 x 195 Rd 16 x 260 Rd 18 x 85 Rd 18 x 150 Rd 18 x 170 Rd 18 x 205 Rd 18 x 275 Rd 20 x 90 Rd 20 x 170 Rd 20 x 180 Rd 20 x 190 Rd 20 x 235 Rd 20 x 300 Rd 24 x 105 Rd 24 x 115 Rd 24 x 210 Rd 24 x 260 Rd 24 x 275 Rd 24 x 335 Rd 24 x 380 Rd 30 x 125 Rd 30 x 150 Rd 30 x 270 Rd 30 x 390 Rd 30 x 510 Rd 36 x 230 Rd 36 x 330 Rd 36 x 440 Rd 36 x 490 Rd 36 x 640 Rd 42 x 450 Rd 42 x 590 Rd 42 x 770 Rd 52 x 730 Rd 52 x 960
weight/kg 0,040 0,052 0,066 0,081 0,111 0,129 0,098 0,120 0,138 0,109 0,191 0,097 0,116 0,136 0,142 0,148 0,176 0,216 0,178 0,256 0,280 0,320 0,407 0,223 0,320 0,332 0,344 0,399 0,477 0,320 0,336 0,490 0,564 0,575 0,683 0,754 0,553 0,600 0,911 1,207 1,503 1,241 1,838 2,300 2,455 3,032 3,113 3,790 4,666 4,913 6,025
price stainless steel /piece 2,58 2,61 2,62 2,65 2,71 2,74 3,24 3,25 3,27 3,30 3,34 4,27 4,29 4,30 4,31 4,32 4,35 4,45 6,42 6,51 6,55 6,57 6,73 7,67 7,85 7,88 7,90 7,97 8,25 9,46 9,48 9,61 9,72 9,80 10,13 10,24 22,60 22,71 22,86 23,01 23,17 32,96 33,47 34,07 34,28 35,00 53,48 54,50 57,06 60,13 67,03

Also available: M-thread

BGW-angled fixing insert

BGW- Winkelanker

The BGW-angled fixing insert is, by mean of it` s low height specially suitable for the installation in flat concrete units.
Into the yellow galvanised or of stainless steel manufactured socket, a metric round thread is cut in, which should be greased before the installation into the precast concrete unit.
For fastening to a steel formwork, BGW-magnetic holders model HM4 are recommended. To prevent dirt and concrete from penetrating into the thread of the socket, plastic stoppers respectively holding discs are used.
The length of the fixing insert can be changed according to your special installation case. Here you should however consider, that the load may change.

angled fixing insert

0322 0324
0,5 0,5 0,8 0,8 1,2 1,2 1,6 1,6 2,0 2,0 2,5 2,5
Rd 12 x 65 Rd 12 x 80 Rd 14 x 70 Rd 14 x 100 Rd 16 x 75 Rd 16 x 120 Rd 18 x 105 Rd 18 x 140 Rd 20 x 105 Rd 20 x 150 Rd 24 x 115 Rd 24 x 150

21,5 21,32

0,77 0,79 0,92 0,97 1,07 1,12 1,74 1,84 1,94 2,02 2,35 2,45
angled fixing insert - stainless steel
0302E 0304E 0306E 0308E 0310E 0312E 0314E 0316E 0318E 0320E 0322E 0324E

hermaphrodite connector

7098 7099

1000 1000

thread father/mother
4,50 8,08 9,28 10,40 12,73 17,08 21,63
Price for additional work
(Quantity at least 50 pieces) Bending of Rebar: 0,75 / piece Shorten of Rebar: 0,75 / piece The lengths can be changed, according to your special installation case. BGW-Bohr GmbH 97854 Steinfeld Tel. 09359/1650 Fax 09359/1640 www.bgw-bohr.de 03/11
BGW-masonry-, walking stick and liapor anchor
BGW-Mauerwerks- Krckstock- und Liaporanker

masonry anchor

Material BST 500 S with pressed-on wire rope loop of zinc steel cable is specially suitable for the transportation of pre-fabricated masonry` s and liapor products. The anchor lengths can be changed to your special installation case.
masonry anchor waved end design

4008 4010

load kg

2600 2000

1,84 2,30 2,66 3,99 4,70 4,40
masonry anchor walking stick design

4028 4027

1,84 2,30 2,66 3,99 4,70 4,55
Walking stick anchor with lifting insert
Liapor anchor with welded holding plate for loading
The anchor lengths and the size of holding plate can be changed to your installation case. More types for welding on demand.
liapor anchor with wire rope loop
liapor anchor with lifting insert

4728 4730

4000 6300

thread Rd

on request variant with u-profile
BGW-holding discs, BGW-screw plug and BGW-plastic stoppers
BGW-Haltescheiben, BGW-Verschlussschrauben und BGW-Verschlustopfen

BGW- holding discs

The BGW-holding discs serve for quick fastening of our sockets to a wooden formwork. With BGW-plastic holding discs a concrete cover of 10 mm is reached. That way, penetration of dirt and concrete into the socket is prevented, and clean plastering after the installation of the precast unit is made possible. On the inside of the screw plugs stainless steel (fittings quality) you have to spread silicone. So the screw plug is pressed into the thread of the anchor which should be closed. It must be flush with the concrete component.
BGW-plastic holding discs
packing unit: 250 pieces art.-no. thread height M/Rd

model 1: without crossbar
load t 2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0 concrete steel 12 ripped 12 smooth Bripped 14 smooth Bripped 16 smooth Bripped 20 smooth B1 wall strength cm 18 to to to to to to to to 30 weight kg 1,42 1,42 1,94 1,94 2,53 2,53 3,95 3,95 package unit/piece price /piece 1,64 1,87 1,84 2,15 2,86 3,25 3,37 3,99
model 2: with welded-in crossbar
When picking up the wall the crossbar prevented the narrowing of the shanks as well as the pulling out of the concrete
load t 2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0 concrete steel 12 ripped 12 smooth Bripped 14 smooth Bripped 16 smooth Bripped 20 smooth B1 wall strength cm 18 to to to to to to to to 30 weight kg 1,64 1,64 2,24 2,24 2,92 2,92 4,57 4,57 package unit/piece price /piece 1,94 2,20 2,15 2,51 2,76 3,22 3,89 4,60
model 3: with welded-on crossbar (bar length = wall./. 20 mm) The jut out crossbar takes the most burden of the wall and prevented therefore narrowing and pulling out the shanks
load t 2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0 concrete steel 12 ripped 12 smooth Bripped 14 smooth Bripped 16 smooth Bripped 20 smooth B1 wall strength cm 18 to to to to to to to to 30 weight kg 1,64 1,64 2,24 2,24 2,92 2,92 4,57 4,57 package unit piece price /piece 1,94 2,20 2,15 2,51 2,76 3,22 3,89 4,60
Advantages of the construction physics by mixed arranged cross bars: 1. natural water stop 2. no cold-bridges 3. distance holder Design with a hook fixing (see description double wall anchors model 6) surcharge 0,51 /piece without with hook fixing
model 4: with crossbar and distance holder

10 mm at one side

When picking up the wall the crossbar prevented the narrowing of the shanks as well as the pulling out the concrete The one-sided distance holder guaranteed the concrete cover when concrete the first outside shell.
load t 2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0 concrete steel 12 ripped 12 smooth Bripped 14 smooth Bripped 16 smooth Bripped 20 smooth B1 wall strength cm 18 to to to to to to to to 30 weight kg 1,79 1,79 2,39 2,39 3,07 3,07 4,72 4,72 package unit / piece price /piece 2,45 2,76 2,66 3,02 3,27 3,73 4,40 5,11
model 5: with crossbar and distance-holder
load t 2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0 wall strength cm 18 to to to to to to to to 30 weight kg 1,94 1,94 2,54 2,54 3,22 3,22 4,87 4,87

10 mm at both sides

price /piece 2,97 3,27 3,17 3,58 3,78 4,29 4,91 5,68
like model 4, as well as distance holder for exact wall-strengths and at the same time as water stop
concrete steel 12 ripped 12 smooth Bripped 14 smooth Bripped 16 smooth Bripped 20 smooth B1 package unit / piece 250 250
model 6: with crossbar, distance-holder 10 mm at both sides and fixing socket for magnetic holder HM4- M16

like model 5, the socket is for fasten on the shuttering and at the installation as installation-socket usable
load t 2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0 concrete steel 12 ripped 12 smooth Bripped 14 smooth Bripped 16 smooth Bripped 20 smooth B1 wall strength cm 18 to to to to to to to to 30 weight kg 2,08 2,08 2,68 2,68 3,36 3,36 5,01 5,01 package unit / piece price /piece 3,22 3,53 3,43 3,83 4,04 4,55 5,16 5,93
model 7: with welded-in crossbar and 1 distance holder
When picking up the wall the crossbar prevented the narrowing of the shanks as well as the pulling out the concrete. The distance holder guaranteed the concrete cover when concrete the first outside shell. The exterior width = wall thickness./. 6cm so that is guaranteed by both sides 3 cm concrete cover
2,0 2,0 2,7 2,7 3,5 3,5 5,0 5,0

concrete steel

12 ribbed 12 smooth Bribbed 14 smooth Bribbed 16 smooth Bribbed 20 smooth B1

wall strength cm

18 to to to to to to to to 30
1,60 1,60 2,20 2,20 2,88 2,88 4,53 4,53
2,45 2,76 2,66 3,02 3,27 3,73 4,40 5,11
model 8: with welded-in crossbar and 2 distance holder

like model 7

1,75 1,75 2,35 2,35 3,03 3,03 4,68 4,68
2,97 3,27 3,17 3,58 3,78 4,29 4,91 5,68
model 9: with welded-in crossbar, 1 distance holder and fixing socket for magnetic holder HM4- M16
like model 7, the socket is for fasten on the shuttering and at the installation as installation-socket usable
1,89 1,89 2,49 2,49 3,17 3,17 4,82 4,82

package unit piece

3,22 3,53 3,43 3,83 4,04 4,55 5,16 5,93
BGW-distance-holder for double walls
BGW-Abstandhalter fr Doppelwnde
distance-holder 10 mm with cap (cross)
It` s a build-in part, which for production of double walls will require, so that fixing the desirable wall strength. At installation the cross must be right-angled in concrete first, which takes the pressure at concrete the second shell. Per wall build in ca. 6 pieces. art.-no. wall strength weight package unit price mm kg ca. piece /piece 0,0,180 0,0,190 0,0,200 0,0,210 0,0,220 0,0,230 0,0,240 0,0,250 0,0,300 0,0,320 0,0,340 0,0,350 0,0,360 0,0,400 0,0,46

round-holes

elongated holes/slanting
round-holes and elongated holes
The amount of the holes are variable; Depends on your special application For example:
angle: 0518 70x70x35/70x70x35/70x70x35/230x190x50/230x190x50/5 peekaboo design round-holes elongated hole round-hole/elongated hole round-holes elongated holes slanting/round-holes amount of holes: 2 on each side 1 on each side 1 round-hole on each side and 1 elongated hole on each side 3 on each side 1 elongated hole on each side and 2 roundholes on each side
Please send us a drawing with your request/order BGW-Bohr GmbH 97854 Steinfeld Tel. 09359/90950 Fax 09359/1640 www.bgw-bohr.de12/06
BGW-wire cable concrete loops
BGW-Betonschlaufen aus Drahtseil, verzinkt BGW-wire cable concrete loops are transport anchors for pre cast concrete units, which stop-side arent visible after installation. So they are specially suitable for prefab foundations, props and fore walls. Please observe: Wire cable concrete loops have to be bewared from confusions, corrosion and sharp bends during the storage and the process. Rope clip out of aluminium if requested out of steel.
art.-no. load t 0,80 1,20 1,60 2,00 2,50 4,00 5,20 6,30 8,00 10,00 12,50 16,00 20,00 25,00 mm h mm wide middle mm wide b/mm packing unit piece weight kg/piece 0,07 0,10 0,15 0,21 0,28 0,46 0,70 1,02 1,60 2,10 3,12 4,71 5,28 6,10 price /piece 0,82 1,00 1,05 1,38 1,46 1,99 2,86 4,01 5,80 8,54 10,58 13,83 22,70 28,58

art.-no. 4549

load t 28,00 32,00 37,00 42,00 47,00 52,00 57,00 65,00 75,00 85,00 99,00

mm 56

h mm 1800

packing unit piece 1

weight kg/piece 7,70 10,68 13,44 12,00 16,42 17,44 25,00 30,00 46,00 55,00 68,00
price /piece 46,61 47,19 62,28 101,73 110,36 131,26 139,04 165,35 203,47 217,96 275,40
BGW-polypropylene concrete loops
BGW-Betonschlaufen aus Polypropylen BGW-polypropylene concrete loops are nearly similar to BGW-wire cable concrete loops. Their range of application, however, is in walls, which visible side is hidden after the installation, and a favourable protection from corrosion is needed. Rope clip out of aluminium if requested out of steel.
art.-no. load t 0,15 0,25 0,36 0,50 0,875 1,00 mm h mm packing unit piece weight kg/piece 0,013 0,030 0,049 0,082 0,119 0,202 price /piece 0,66 0,77 0,92 1,28 1,71 2,15
BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/90950 - Fax. 09359/1640 www.bgw-bohr.de (03/11)

(07/09) (05/01)

BGW-Bent Cast-in Loops and Formers
BGW-Winkelschlaufen und Formkrper
BGW-Bent Cast-in Loop, zink plated
BGW-Cast-in loop, bent art.-no. 4552 load t 1,6 2,5 2,5 4,0 4,0 5,2 8,0 loop h mm 230 leg l mm 600 steel rope d mm 18 weight kg/piece 0,31 0,43 0,49 0,67 0,70 0,71 1,96 price /piece 1,99 2,34 2,41 2,97 3,12 4,04 on demand

variant A

variant B
Total length from middle of eye until middle of eye. mm

eye 90 contorted

eye parallel
art.-no. rope 1528-A 1528-B 1527-A 1527-B 1526-A 1526-B 1525-A 1525-B
load t 5t 5t 10 t 10 t 20 t 20 t 32 t 32 t
rope 18 mm 18 mm 26 mm 26 mm 34 mm 34 mm 40 mm 40 mm

BGW-sleeve anchor

for sandwich-pannels
BGW-Manschettenanker fr Sandwichplatten Anchors in other dimensions are available on request. material: stainless steel 1.4571 sheet metal strength: 1,5 mm
art.-no. mm h mm weight kg/pc. 0,288 0,432 0,576 0,720 0,864 1,008 1,152 1,296 1,440 1,584 0,336 0,504 0,672 0,840 1,008 1,176 1,344 1,512 1,680 1,848 0,384 0,576 0,768 0,960 1,152 1,344 1,536 1,728 1,920 2,112 0,432 0,648 0,864 1,080 1,296 1,512 1,728 1,944 2,160 2,376 0,472 0,708 0,944 1,180 1,416 1,652 1,888 2,124 2,360 2,596 0,500 0,750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750 price /piece 6,45 8,30 9,90 12,75 14,50 16,55 18,52 20,36 22,32 24,06 7,85 10,10 12,35 14,80 16,95 19,35 21,65 23,80 26,10 28,10 9,25 12,35 15,25 18,30 21,25 24,15 26,70 29,60 32,60 35,10 9,60 12,65 15,60 18,75 21,65 33,35 37,15 41,30 45,50 49,00 10,40 13,68 16,80 20,25 23,40 36,00 40,00 44,50 48,90 52,70 11,15 14,70 18,05 21,70 25,10 38,65 42,85 47,60 52,35 56,45
art.-no. 2064-2074-2074-20331 20391

mm 255 280

h mm 360 360
weight kg/pc. 1,075 1,340 1,614 1,880 2,152 2,416 2,690 2,954 0,566 0,853 1,131 1,409 1,416 1,848 2,306 2,380 2,890 3,165 2,412 2,710 3,017 3,313 1,902 2,213 2,536 2,847 3,108 3,482 2,564 2,879 3,210 3,520 2,715 3,048 3,394 3,727
price /piece 24,05 27,70 31,10 44,65 48,85 53,60 58,35 62,46 30,40 34,45 38,50 42,55 37,10 50,65 54,58 59,60 64,35 68,45 64,50 69,10 73,60 78,10 55,00 60,20 65,55 69,45 74,75 78,85 68,30 73,45 78,65 83,75 88,84 92,93 97,00 102,00
BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/90950 - Fax. 09359/1640 www.bgw-bohr.de 03/11 (01/09) (11/06)
BGW-flat anchor for sandwichplates

BGW-Sandwichpannel-anchor

for sandwichplates

BGW-Sandwichpannel-anchor made out of rust and acid-proof stainless steel Material: stainless steel 1.4401

art.-no. mm

SPA-1-5-160-A4 SPA-1-5-180-A4 SPA-1-6-160-A4 SPA-1-6-180-A4 SPA-1-6-200-A4 SPA-1-6-220-A4 SPA-1-6-240 A4 SPA-1-6-260-A4 SPA-1-6,5-160-A4 SPA-1-6,5-180-A4 SPA-1 6,5-200-A4 SPA-1-6,5-220-A4 SPA-1-6,5-240-A4 SPA-1-6,5-260-A4 SPA-1-8-200-A4 SPA-1-8-220-A4 SPA-1-8-240-A4 SPA-1-8-260-A4 SPA-1-8-280-A4 SPA-1-8-300-A4 SPA-1-8-320-A4 SPA-1-10-260-A4 SPA-1-10-280-A4 SPA-1-10-300-A4 SPA-1-10-320-A4 SPA-1-10-340-A4 SPA-1-10-360-E SPA-1-10-380-A4 SPA-1-10-400-A4 SPA-1-10-420-A6 6,5 6,5 6,5 6,5 6,5 6,10

400 420

0,11 0,12 0,16 0,17 0,18 0,20 0,21 0,22 0,19 0,20 0,23 0,23 0,24 0,26 0,32 0,35 0,37 0,39 0,41 0,44 0,46 0,658 0,693 0,727 0,762 0,796 0,830 0,865 0,900 0,935
2,42 2,64 3,52 3,74 3,96 4,40 4,62 4,84 4,18 4,40 5,06 5,06 5,28 5,72 7,04 7,70 8,14 8,58 9,02 9,68 10,12 14,48 15,25 15,99 16,76 17,51 18,26 19,03 19,80 20,57
SPA-2-5-160-A4 SPA-2-5-180-A4 SPA-2-6-160-A4 SPA-2-6-180-A4 SPA-2-6-200-A4 SPA-2-6-220-A4 SPA-2-6-240-A4 SPA-2-6-260-A4 SPA-2-6,5-160-A4 SPA-2-6,5-180-A4 SPA-2-6,5-200-A4 SPA-2-6,5-220-A4 SPA-2-6,5-240-A4 SPA-2-6,5-260-A4 SPA-2-8-200-A4 SPA-2-8-220-A4 SPA-2-8-240-A4 SPA-2-8-260-A4 SPA-2-8-280-A4 SPA-2-8-300-A4 SPA-2-8-320-A4 SPA-2-10-260-A4 SPA-2-10-280-A4 SPA-2-10-300-A4 SPA-2-10-320-A4 SPA-2-10-340-E SPA-2-10-360-E SPA-2-10-380-A4 SPA-2-10-400-A4 SPA-2-10-420-A6 6,5 6,5 6,5 6,5 6,5 6,10
0,19 0,21 0,27 0,30 0,32 0,35 0,37 0,40 0,32 0,35 0,38 0,41 0,44 0,47 0,58 0,62 0,67 0,71 0,75 0,80 0,84 1,185 1,254 1,329 1,392 1,462 1,530 1,600 1,668 1,738
4,18 4,62 5,94 6,60 7,04 7,70 8,14 8,80 7,04 7,70 8,36 9,02 9,68 10,34 12,76 13,64 14,74 15,62 16,50 17,60 18,48 26,07 27,59 29,24 30,62 32,16 33,66 35,20 36,70 38,24
BGW-Bohr GmbH - 97854 Steinfeld - Tel. 09359/90950 - Fax 09359/1640 www.bgw-bohr.de 04/11
BGW-hairpins, clip-on-stirrups BGW-Verbundhaarnadeln
BGW-hairpins, clip-on-stirrups out of rust- and acid resident stainless steel. material: stainless steel 1.4401

BGW-hairpin SPA-N

HKS with screw-nut for anchor channels 40/22, stainless steel V4A-70
Size thread x length l/mm M 10 x 30 M 10 x 40 M 10 x 50 M 12 x 30 M 12 x 40 M 12 x 50 M 12 x 80 M 12 x 100 M 12 x 150 M 16 x 30 M 16 x 40 M 16 x 50 M 16 x 60 M 16 x 80 M 16 x 100 M 16 x 150 M 16 x 200 Art-no. stainless steel 56190-60A4 56190-61A4 56190-62A4 56190-67A4 56191-4A4 56190-4A4 56190-69A4 56190-70A4 56190-72A4 56190-74A4 56191-3A4 56190-3A4 56190-75A4 56190-76A4 56190-77A4 56190-79A4 56190-80A4 Packaging unit price/ per 100 pieces stainless steel 1959,00 2002,00 2080,00 1323,00 1465,00 1592,00 1843,00 2031,00 2869,00 1496,00 1603,00 1736,00 1811,00 1964,00 2482,00 3253,00 3999,00
Length l of the screw without screw head Screw for anchor channels 40/22 & 50/30
HKS with screw-nut for anchor channels 50/30, galvanized (strength class 4.6)
Size thread x length l/mm M 10 x 30 M 10 x 40 M 10 x 50 M 12 x 30 M 12 x 40 M 12 x 50 M 12 x 60 M 12 x 80 M 12 x 100 M 12 x 125 M 12 x 150 M 12 x 200 M 16 x 30 M 16 x 40 M 16 x 50 M 16 x 60 M 16 x 80 M 16 x 100 M 16 x 125 M 16 x 150 M 16 x 200 M 16 x 300 M 20 x 35 M 20 x 45 M 20 x 55 M 20 x 65 M 20 x 75 M 20 x 100 M 20 x 125 M 20 x 150 M 20 x 200 M 20 x 300 Art.-no. galvanized 56190-83 56190-84 56190-85 56190-86 56191-9 56190-87 56190-88 56190-89 56191-7 56190-90 56190-91 56190-92 56190-93 56190-5 56190-94 56190-95 56190-96 56191-8 56190-97 56190-98 56190-99 56190-100 56190-101 56190-102 56190-103 56190-104 56190-105 56190-106 56190-107 56190-108 56190-109 56190-110 Packaging unit price/ per 100 pieces galvanized 245,00 245,00 248,00 209,00 215,00 224,00 232,00 263,00 323,00 482,00 570,00 776,00 252,00 258,00 271,00 278,00 317,00 375,00 482,00 547,00 661,00 930,00 319,00 323,00 343,00 354,00 375,00 434,00 577,00 670,00 861,00 1134,00
Length l of the screw without screw head
Screw for anchor channels 40/22 & 50/30
HKS with screw-nut for anchor channels 50/30, stainless steel V4A-70
Size thread x length l/mm M 12 x 30 M 12 x 40 M 12 x 50 M 12 x 100 M 16 x 30 M 16 x 40 M 16 x 50 M 16 x 60 M 16 x 80 M 16 x 150 M 20 x 45 M 20 x 55 M 20 x 75 M 20 x 100 M 20 x 125 M 20 x 150 Art-no. stainless steel 56190-86A4 56191-9A4 56190-87A4 56191-7A4 56190-93A4 56190-5A4 56190-94A4 56190-95A4 56190-96A4 56190-98A4 56190-102A4 56190-103A4 56190-105A4 56190-106A4 56190-107A4 56190-108A4 Packaging unit price/ per 100 pieces stainless steel 1528,00 1543,00 1673,00 2516,00 2444,00 2698,00 2875,00 2924,00 3632,00 4337,00 2924,00 3141,00 3583,00 3640,00 4426,00 5059,00