AromaPro

USERS GUIDE

8910 SERIES 220-240V 3 Safety Instructions

4-5 Product View

Assembly

6-8 Special Features

8-15 Operation

16 Maintenance and Care

16-18 Troubleshooting

18 Consumer Services

19 Replacement Parts

20 Warranty

ug310-5822_8910E_107.indd 1

1/7/07 8:43:05 AM

Thanks for buying a BISSELL AromaPro
Were glad you purchased a BISSELL AromaPro heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your AromaPro is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, youll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your AromaPro. Thanks again, from all of us at BISSELL.
Mark J. Bissell President and Chief Executive Officer

www.bissell.com

ug310-5822_8910E_107.indd 2

1/7/07 8:43:09 AM

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT DEEP CLEANER.
Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.

WARNING: To reduce the

risk of fire, electric shock, or injury:
Use indoors only Do not immerse Use only on surfaces moistened by cleaning process Do not leave machine when it is plugged in Do not service machine when it is plugged in If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard Do not use machine if it has been dropped, damaged, left outdoors or dropped into water Do not expose to rain, store indoors Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces Do not carry the appliance while in use Do not unplug by pulling on cord; unplug by grasping plug not the cord Do not handle plug or appliance with wet hands Do not put any object into appliance openings, use with blocked opening or restrict air flow Do not expose hair, loose clothing, fingers or body parts to openings or moving parts Do not pick up hot or burning objects Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours
Remove plug from electrical outlet before cleaning or maintaining the appliance Not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.) Do not modify the Earthed plug Do not allow to be used as a toy Do not use for any purpose other than described in this Users Guide Use only manufacturers recommended attachments Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface Turn off all controls before unplugging Be extra careful when cleaning stairs Pay close attention when working around children

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY. This appliance must be Earthed.

WARNING:

IMPORTANT Hz POWER ON FOR OPERATION A 220-240 VOLT A.C. 50/60
SUPPLY ONLY. If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. Spares may be obtained from your BISSELL supplier. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.
ug310-5822_8910E_107.indd 3

Product view

TurboBrush Storage (Select Models)

SmartTemp Ready Light

SmartMix Switch SmartMix Tank
Flow Indicator (Filter Inside) Lower Handle

DirtLifter PowerBrush

Optional Accessories:
ReadyTools Dial Belt Access Door Floor Nozzle Window
These items are available for purchase with your model. To order replacement parts or additional tools or formulas, please refer to page 19.

3 Tough Stain Brush

4 Upholstery Tool

PreTreat Wand

TurboBrush

Hard Floor Attachment

Spraying Crevice Tool
ug310-5822_8910E_107.indd 4

1/7/07 8:43:10 AM

Trigger
Keep plenty of genuine BISSELL deep cleaning formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.

Upper Handle

Tool Caddy Power Cord Quick Release Tough Stain Brush Storage

Power/SmartTemp Switch

Tank-inTank Hex Nuts

Handle Release Flex Hose

BISSELL Formulas:
4" Upholstery Tool Storage (Select Models)
1.42 L Fibre Cleansing Formula with Scotchgard protector
1.42 L Multi- Allergen Removal Formula with Scotchgard protector
1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector
1.42 L Natural Orange Extract Formula with Scotchgard protector
1.42 L Lavender Essence Formula with Scotchgard protector
32 oz. Hard Floor Solutions Formula

1/7/07 8:43:11 AM

ug310-5822_8910E_107.indd 5

How to use this guide

This users guide has been designed to help you get the utmost satisfaction from your BISSELL AromaPro. Youll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this user's guide thoroughly before assembling your deep cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this users guide will greatly enhance your ability to get the most performance from your BISSELL AromaPro for many years.
WARNING: cleaner Do not plug in your
until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Your AromaPro comes in three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. Refer to Assembly Diagram on page 5 1. Slide upper handle onto lower handle. 2. Feed bundled power cord through tool caddy from

caddys flat side. 3 4

Align upper handle holes and tool caddy holes. Place hex nut into back of tool caddy and hold in place. Insert bolt from front to back, turning into the hex nut until snug. Do not over tighten. Repeat for the second bolt and hex nut. Insert 2 screws into lower 2 holes. Turn until snug. Snap tools into storage on the tool caddy. Wrap power cord and flex hose as shown in figure 7.

5. 6. 7.

AromaPro assembly is now complete.

Special features

Your BISSELL AromaPro deep cleaner is a home cleaning system that automatically mixes hand hot tap water with BISSELL deep cleaning formulas and heats the solution as it is applied to the carpet. The combination of heated solution, rotating brushes and powerful suction provide a safe and effective method of cleaning.
ug310-5822_8910E_107.indd 6

1/7/07 8:43:51 AM

SmartTemp
The BISSELL ProHeat models all feature a patented built-in heater which will heat hand hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 180. The power switch, which is located on the back of the machine, controls the power to the machine and the heater. SmartTemp Ready Light
The DirtLifter PowerBrush is designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibres. The floating suspension self-adjusts to all carpet heights. When the power is ON ( I ) and the machine is in the upright position, your carpet is protected because the brushes are lifted up off the carpet.

SmartMix

The SmartMix feature automatically mixes hand hot tap water with the BISSELL deep cleaning formula. Simply choose one of the 3 settings (Heavy Traffic, Normal, or Water Rinse) and the AromaPro will adjust the right amount of cleaning formula to mix with the heated water to fit your cleaning need. Having a separate formula tank from the water tank allows no waste of formula. Because the water and formula are stored separately, they are not mixed until you are ready to clean. When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time! SmartMix bottle

Scotchgard Protector

Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.

1/7/07 8:43:54 AM

ug310-5822_8910E_107.indd 7

Tank-in-Tank

Our Tank-in-Tank system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows you to maximize tank space, yet only carry one tank to and from the sink for emptying and filling.

ReadyTools Dial

This provides either floor cleaning or above the floor cleaning with the flip of a switch. If choosing above floor cleaning for upholstery, stairs, or along the baseboards, choose the attachment appropriate for the job. Attach tool to the hose, and you are ready to go!

Flow Indicator

This is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the carpet and will stop spinning when the SmartMix tank or bladder needs to be refilled, or when the trigger is released.
Note: Flow indicator does not spin when spraying through the attachment hose.

R NG FLOO NI CLEA

S TOOL AT RE PRET

Operation

Before you clean
1. 2. 3. 4. Plan activities to give your carpet time to dry.

BRUSH SUCTION

Move furniture to another area if cleaning an entire room (optional). Thoroughly vacuum area with a dry vacuum cleaner before deep cleaning. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

S H TA E R R

ATTENTION: a Some Berber carpets have
tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition.
ug310-5822_8910E_107.indd 8

1/7/07 8:43:56 AM

Fill the water tank
1. 2. 3. Release the handle and lay the machine handle back to access the tank. Remove the tank from the base of the machine by lifting the tank carry handle. Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Lift off and set the lid aside. Fill up the bladder with clean hand hot tap water. *Do not boil or microwave water as it can destroy the bladder. Replace the top of the tank by matching the lid 5 and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid.
Note: Remember to secure the lid and test to make sure it is secure before picking up the tank. 2
Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. Bring machine handle back into 1 upright position.
Fill the SmartMix/formula tank
1. 2. Lift the formula tank up and out of the machine base. To fill the formula tank, first unscrew the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank back into the base of machine, making sure it is seated securely.

Note: If bottle leaks, check for proper positioning of red grommet and straw.
WARNING: and To reduce the risk of fire
electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner.
When filling bottle or storing unit, set dial to:
Choose the SmartMix setting
Simply choose one of the 3 settings Heavy Traffic Normal Water Rinse and the AromaPro will adjust the right amount of cleaning formula to mix with the heated water to fit your cleaning need.
Note: When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time! www.bissell.com

WATER RINSE

SmartMix Dial
H TR IG AFH N W OR FIC C AT M A A R RP ER L O E R TE T IN C SE T

1/7/07 8:43:57 AM

ug310-5822_8910E_107.indd 9

Set ready tools dial

Set ReadyTools dial to floor cleaning. ReadyTools Dial
OR NG FLO ANI CLE LS TOO AT TRE PRE

Power switch

1. Plug into a proper outlet and turn the power switch to the ON ( I ) position. The switch is found on the back of the handle. Allow 1 minute for the built-in heater to warm-up before cleaning. The AromaPro will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning. The SmartTemp ready light indicates when the heater is ON ( I ).
Note: SmartTemp heats the cleaning solution for carpet and hard floor application only. It does not heat solution sprayed through the accessory tools.
Deep cleaning stairs and heavy traffic areas on a regular basis can prolong carpet life.
Power Switch and SmartTemp Switch

Cleaning strokes

While pressing the trigger, make one slow forward wet pass and another one back. Let the built-in heater, formula, and DirtLifter PowerBrush do the work for you. Caution: Do not overwet. Take care not to run over loose objects, edges of area rugs, or the cord. Stalling brush may result in premature belt failure. Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water, and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you cant see any more water being pulled up.
NOTE: Both the SmartMix tank and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply cleaning formula or water.

SmartTemp Light

After cleaning, you may want to turn the SmartMix dial to water rinse to give your carpeting a final water only rinse. This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula. BISSELL deep cleaning formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer.

ug310-5822_8910E_107.indd 10

1/7/07 8:43:58 AM

Empty the tank
1. Remove the water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. Empty collection water from bottom of tank.
NOTE: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away.
After each use, remove and rinse the lint screen located on the tank lid. Refill the water tank by referencing Fill the water tank on page 9. Remember to secure the top of the tank by rotating the handle and test to make sure it is secure before picking up. Return water tank to the machine.
NOTE: Always check the level of cleaning formula in the SmartMix tank at the same time, and refill as needed

Rinse (optional)

Rinsing is an optional step that can be done during the cleaning process by switching to the water rinse setting, or it can be done after the carpeted area has been cleaned. 1. Simply choose the water rinse setting on the SmartMix dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear.

1/7/07 8:43:59 AM

ug310-5822_8910E_107.indd 11
Cleaning with attachments
Your AromaPro machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags for cleaning instructions. A. Check manufacturers tag before cleaning. W or WS on the tag means you can use your AromaPro. If the tag is coded with an X or an S (with a diagonal stripe through it), or says Dry Clean Only, do not proceed with any deep cleaning machine. Do not use on velvet, silk, 100% cotton upholstery, vinyl or leather. If manufacturers tag is missing or not coded, check with your furniture dealer or manufacturer. B. Check for colourfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Coloured stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds. 2. 3. Follow the instructions on page 9 for filling the water tank and the formula tank. Set ready tools dial to the tools setting. This will allow spray and divert the suction to the hose.

*SmartTemp heats the cleaning solution for carpet and hard floor application only. It does not heat solution sprayed through the accessory tools.

Manufacturers tag

WARNING: To reduce the risk of
injury, be extra careful when cleaning stairs. Make sure machine is secure and level.
bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg

4. 5. 6.

Set SmartMix dial to normal. Attach the cleaning tool to the end of the hose. Plug in and turn on the power switch.
ug310-5822_8910E_107.indd 12

1/7/07 8:44:00 AM

7. Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. When cleaning is complete, remove and rinse tools in clean, running water. Coil hose around the tool caddy.
10. Empty water tank and rinse out, following the instructions on page 11. 11. Return ready tools dial to floor cleaning.

Cleaning fluid section

Keep plenty of genuine BISSELL deep cleaning formulas on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
fire and electric shock due to internal component damage, use only BISSELL deep cleaning formula intended for use with the deep cleaner. Non-BISSELL cleaning formula may harm the machine and void the warranty.
1.42 L Fiber Cleansing Formula with Scotchgard protector item # 710E
1.42 L Multi-Allergen Removal Formula with Scotchgard protector item # 720E
1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector item # 730E
1.42 L Natural Orange Extract Formula with Scotchgard protector item # 740E
1.42 L Lavender Essence Formula with Scotchgard protector item # 750E

1/7/07 8:44:01 AM

ug310-5822_8910E_107.indd 13

Stain removal

Do Not Delay! Attending to an accident soon after it occurs ensures the chances for full removal. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum. Use your BISSELL deep cleaner as a precleaner. With one of the tools attached to the flex hose, set the ReadyTools dial to Tools and the SmartMix dial to Heavy Traffic. Spray the area with cleaning solution and allow the BISSELL deep cleaning formula to penetrate for 3-5 minutes. Once the precleaning is complete, use the attached tool to gently scrub the stain with back and forth strokes. Allow to dry. Some difficult stains may require a second treatment.

Hard floor cleaning

Your AromaPro model may have come with a hard floor attachment and Hard Floor Solutions formula. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone or on the website. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Vacuum or sweep thoroughly to pick up any loose debris and pet hair. 2. 3. Move any furniture, if needed. Empty any carpet cleaning formula back into the BISSELL bottle if stored in the formula tank. Fill formula tank with BISSELL Hard Floor Solutions, available at many retailers, or contact BISSELL Consumer Services.
ug310-5822_8910E_107.indd 14

1/7/07 8:44:41 AM

Hard floor cleaning (Continued)
4. 5. Fill the water tank with hand hot tap water and set aside. Attach the hard floor tool onto the floor nozzle with the long tab to the right side of the floor nozzle. First attach left side (short tab) catching tab over nozzle edge. Gently bend long tab (right side) outward to easily snap over edge of clear nozzle on left. Set the ReadyTools dial to Floor Cleaning. Set the SmartMix dial to Normal. Plug into an outlet and turn the power switch ON ( I ). Slowly move the machine forward and back over bare floor surface one time while pressing trigger. Caution: Do not overwet. Hard Floor Cleaning Tool Bottom Front Edge of Floor Nozzle Snap Together

6. 7. 8. 9.

10. Repeat the motion without pressing the trigger. This allows the bare floor tool to squeegee and suction up the dirty water. 11. Allow approximately 30 minutes for floors to dry. 12. Remove hard floor tool and rinse and dry before storing. 13. If any formula remains in the formula tank, pour it back into the Hard Floor Solutions bottle for use the next time. 14. Rinse out the formula tank.

1/7/07 8:44:47 AM

ug310-5822_8910E_107.indd 15

Maintenance and care

Machine storage
Once your cleaning is complete, make sure the water tank is emptied and rinsed out. Put the unit away in a closet or basement for the next use. The SmartMix tank can remain filled and ready to go (store with machine set to water rinse setting), or it can simply be emptied back into the formula bottle if that is more convenient.

Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

Machine care

For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn the power switch OFF ( O ). Unplug the machine and wrap the power cord. 2. After emptying the water tank, rinse it out at a faucet with running hand hot tap water, taking care to clean underneath the heavy duty bladder, and all around it. Clean out lint trap. Replace the water tank on the machine.
Clean out the flow indicator filter each time it is used to ensure best cleaning performance. Unscrew the flow indicator cap, lift out the red rotor and white filter. Rinse all three parts with water. Replace the filter and rotor. Replace the flow indicator cap. Turn until snug, do not over-tighten. Any loose hair or debris can be pulled from the brush roll if desired and thrown away. Wipe the machines exterior with a soft cloth. After carpet is dry, vacuum again to remove hair and fuzz.

Troubleshooting

SmartTemp ready light does not illuminate.

Possible Causes

fire, electric shock or injury, unplug from the outlet before servicing.

Remedies

1. The power switch is not turned ON ( I ).
1. Turn ON ( I ) the power switch.
Reduced spray or no spray.

Possible Cause

1. Bladder may be empty. 2. SmartMix tank may be empty.
1. Refill bladder with hand hot tap water. 2. Fill with BISSELL deep cleaning formula for cleaning. Fill with water if rinsing.
ug310-5822_8910E_107.indd 16
Reduced spray or no spray (continued).

Possible Cause Remedies

3. The filter may be clogged. 4. Tanks may not be seated properly. 5. Pump may have lost prime.
6. The pump belt may be broken.
3. Clean out flow indicator filter, page 16. 4. Turn power OFF (O); remove & reseat tanks. 5. Turn power OFF (O); after 1 minute turn ON and press trigger. 6. Turn on the machine and check to see that the DirtLifter PowerBrush turns. If it does not, refer to #1 below.
DirtLifter PowerBrush does not turn.
1. The brush belt or pump belt is off or broken.
Lift Here Insert Screwdriver Blade Here

1. Turn the machine OFF (O) and unplug from the outlet. To check if the brush belt or pump belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the belt access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. If broken, please refer to Replacement Parts on page 19 before calling BISSELL Consumer Services. Complete installation instructions will accompany the replacement belt. Remedies 1. Set ReadyTools dial to either Floor Cleaning or Tools. 2. Press down firmly on the black oval gasket at the top window to make sure the two tabs on the back of the nozzle window are snapped into the mating slots in the main housing. 3. Re-install lid; refer to page 9. 4. Tank-in-tank must be firmly seated to function; remove and reseat tank-in-tank. 5. Adjust angle; apply more downward pressure.
Cleaner not picking up solution.
1. ReadyTools dial may be on the wrong setting for the cleaning job. 2. Nozzle window may not be properly attached.
3. Tank-in-tank lid is not properly installed. 4. Tank-in-tank is not properly seated.
5. Poor tool position. (Hand held attachments only).

1/7/07 8:44:48 AM

ug310-5822_8910E_107.indd 17
Cleaner not picking up solution (continued).
Remedies 6. Tank-in-tank has picked up 6. Empty tank-in-tank, refer to maximum dirty water. page 11. Other maintenance or service not included above should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
BISSELL Consumer Services
If your BISSELL product should require service:
In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. If you have questions about your warranty or need replacement parts please contact the numbers below.
For UK inquiries: Monday - Thursday 9 am 5 pm Friday 9 am 4 pm BISSELL Homecare (Overseas) Inc. The Boat Yard 105 Straight Road Old Windsor Berkshire, SL4 2SE United Kingdom Telephone: 0870-225-0109 For New Zealand inquiries: Monday - Friday 9 am 5 pm Parex Appliances 103 Central Park Drive Henderson Auckland New Zealand Telephone: 0800-247-735

For Australian inquiries: 24 hours a day 7 days a week E.D. Oates Pty Ltd 76 - 82 Newlands Road Reservoir VIC 3073 Australia Telephone: 1-800-811-183
For all other inquiries: Monday - Friday 8 am 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids, MI 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383
Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See Warranty on page 20 for details. Please do not return this product to the store.
ug310-5822_8910E_107.indd 18

1/7/07 8:44:49 AM

Replacement parts - BISSELL AromaPro
Below a list of common replacement parts*. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.

Part No.

210-9201 203-6655 203-6652 214-9131 214-9142 215-9155 015-9043 015-4439 015-9041 210-1785 210-1795 555-6503 214-9871 210-4052 215-0628 015-0621 213-3501 710E 720E 730E 740E 750E 0484

Part Name

4 Small Area Tool Spraying Crevice Tool TurboBrush Bare Floor Tool PreTreat Wand Tough Stain Brush Tank Assembly Complete (Includes lid assembly) Tank Lid Assembly Tank Bottom SmartMix Tank (Includes Cap) SmartMix Cap Assembly Flow Indicator Cap Assembly Floor Nozzle Window and Gasket Window Gasket Replacement Pump Belt (With Instructions) Replacement Belt Brush (With Instructions) Lint Screen 1.42 L Fiber Cleansing Formula with Scotchgard protector 1.42 L Multi-Allergen Removal Formula with Scotchgard protector 1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector 1.42 L Natural Orange Extract Formula with Scotchgard Protector 1.42 L Lavender Essence Formula with Scotchgard protector 32 oz. Hard Floor Solutions
*Not all parts are included with every model. 7

1/7/07 8:44:50 AM

ug310-5822_8910E_107.indd 19
Warranty - BISSELL AromaPro
This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc., will replace (with new or remanufactured components), at BISSELLs option, free of charge from the date of purchase by the original purchaser, for two years any defective or malfunctioning part do to manufacturers defect. This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the Users Guide is not covered.
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELLS LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. *EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Scotchgard is a trademark of 3M.
2007 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 310-5822 Rev 1/07 Visit our website at: www.bissell.com
ug310-5822_8910E_107.indd 20

1/7/07 8:45:46 AM