USERS GUIDE

9200, 9400 SERIES 220-240V

Safety Instructions

Product View / Accessories

Assembly

7-18 Features / Operations

19-20 Troubleshooting

Consumer Services

22-23 Replacement Parts

Warranty
ug310-5880_9200E_406.indd 1

6/9/06 4:25:27 PM

Thanks for buying a BISSELL ProHeat 2X
Were glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your ProHeat 2X is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, youll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your ProHeat 2X. Thanks again, from all of us at BISSELL.
Mark J. Bissell President and Chief Executive Officer

www.bissell.com

ug310-5880_9200E_406.indd 2

6/9/06 4:25:29 PM

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT DEEP CLEANER.
Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.

WARNING: To reduce the

risk of fire, electric shock, or injury:
Use indoors only Do not immerse Use only on surfaces moistened by cleaning process Do not leave machine when it is plugged in Do not service machine when it is plugged in If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard Do not use machine if it has been dropped, damaged, left outdoors or dropped into water Do not expose to rain, store indoors Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces Do not carry the appliance while in use Do not unplug by pulling on cord; unplug by grasping plug not the cord Do not handle plug or appliance with wet hands Do not put any object into appliance openings, use with blocked opening or restrict air flow Do not expose hair, loose clothing, fingers or body parts to openings or moving parts Do not pick up hot or burning objects Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours
Remove plug from electrical outlet before cleaning or maintaining the appliance Not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.) Do not modify the Earthed plug Do not allow to be used as a toy Do not use for any purpose other than described in this Users Guide Use only manufacturers recommended attachments Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface Turn off all controls before unplugging Be extra careful when cleaning stairs Pay close attention when working around children

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.
WARNING: This appliance must be Earthed. IMPORTANT Hz POWER ON FOR OPERATION A 220-240 VOLT A.C. 50/60
SUPPLY ONLY. If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. Spares may be obtained from your BISSELL supplier. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.

ug310-5880_9200E_406.indd 3

Spray Trigger

Power Switch

Heater Switch

Extra Long Power Cord

Flex Hose Upper Handle

Easy Carry Handle Heat Indicator Light Tank Carry Handle Ready Tool Dial 2-in-1 Water Tank Detent Pedal
Lower Base Easy To Remove Nozzle Edge Sweep Brushes

Optional Accessories:

These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 22-23.

3 Tough Stain Brush

4 Upholstery Tool

6' Stair Tool

TurboBrush

Hard Floor Attachment

Spraying Crevice Tool
Scotchgard Protector Applicator Tool Bag
ug310-5880_9200E_406.indd 4

6/9/06 4:25:30 PM

Upper Hose Rack
Hose Secure Latch Upper Handle TurboBrush Storage (select models) Crevice Tool Holder (select models)
Lower Hose Rack Lower Base

Detent Pedal

Formula Tank
Keep plenty of genuine BISSELL Deep Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning Formulas. Non-BISSELL cleaning formulas may harm the machine and void the warranty.

BISSELL Formulas:

1.42 L 1.42 L Fibre Cleansing Multi- Allergen Formula with Removal Formula Scotchgard with Scotchgard protector protector www.bissell.com
1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector
1.42 L Natural Orange Extract Formula with Scotchgard protector
1.42 L Lavender Essence Formula with Scotchgard protector
32 oz. Hard Floor Solutions Formula
8 oz. Scotchgard Protector Post Treatment Cartridge
ug310-5880_9200E_406.indd 5

6/9/06 4:25:31 PM

How to Use this Guide
This Users Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. Youll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User's Guide thoroughly before assembling your Deep Cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this Users Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat 2X for many years.

WARNING: Do not plug in your
cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Assembling Your ProHeat 2X
Your ProHeat 2X comes in three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver.
Refer to Assembly Diagram on page 5
1. 2. 3. 4. Slide upper handle onto lower handle. Screw 3 screws into the marked holes. Place upper hose rack onto back of upper handle and secure with tapered screw. Place lower hose rack onto back of upper handle by pushing in and sliding down until it 5 snaps into place. Snap tools into the tool caddy as shown in Crevice figure 5. Holder Wrap power cord and flex hose as shown in (select figure 6. models) Keep flex hose snugly in place by using the hose secure latch. ProHeat 2X assembly is now complete. Scotchgard

5. 6. 7.

Tough Stain Brush TurboBrush

(select models)

Protector Applicator Tool

Hose Secure Latch 6

ug310-5880_9200E_406.indd 6

6/9/06 4:25:36 PM

Special Features of Your BISSELL ProHeat 2X
Your BISSELL ProHeat 2X Deep Cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind.

Built-in Heater

BISSELL ProHeat models all feature a patented built-in heater which will heat the hand hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 190 degrees. The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs.
Dual DirtLifter PowerBrushes
The two DirtLifter PowerBrush rolls are designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibres. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the power switch ON ( I ). Once the product is in the upright position, the brushes automatically stop spinning. The detent pedal will activate the brushes when floor cleaning.
(located behind 2-in-1 water tank)

Custom Clean

The Custom Clean feature automatically mixes hand hot tap water with the BISSELL Formula. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or rinse) and the ProHeat 2X will adjust the right amount of cleaning formula to mix with the heated water to fit your cleaning need. This feature is available on all ProHeat 2X models, either behind the 2-in-1 water tank or on the upper handle. Having a separate formula tank from the 2-in-1 water tank also allows no waste of formula. Because the water and formula are stored separately, they are not mixed until you are ready to clean. When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time!

(located on upper handle)

6/9/06 4:25:37 PM

ug310-5880_9200E_406.indd 7
Scotchgard Protector Applicator Tool and Scotchgard Warranty
Carpet protection applied at the mill typically wears down with heavy foot traffic over time and with everyday cleaning, including deep cleaning. To help restore this important protection, BISSELL offers deep cleaning formulas with Scotchgard protector and a post-applicator to apply Scotchgard protector with the same materials used by carpet mills. This offers extra protection against dirt and tough stains to keep your carpets looking good longer. To maintain your Scotchgard 5-year limited stain warranty, you no longer are required to hire a professional cleaner. By using your BISSELL ProHeat machine with BISSELL Formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect. No other home deep cleaning system can do this for you. Refer to the Scotchgard protector warranty for details.

2-in-1 Water Tank

Our 2-in-1 water tank full capacity system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows the user to maximize tank space, yet only carry one tank to and from the sink for emptying and filling.
Easy to Remove and Clean Nozzle
Now, cleaning up your machine after the cleaning process is easier than ever! Simply remove the 2-in-1 water tank and remove the screw to pop out the nozzle for rinsing in the sink. Dirt, loose carpet fibres and remaining pet hair or fuzz gets washed away in a snap.

Ready Tools Dial

This provides either floor cleaning or above the floor cleaning with the turn of a knob. If choosing above floor cleaning for upholstery, stairs, or in those creases close to the baseboards, choose the attachment appropriate for the job, attach it to the flex hose, and you are ready to go!

F CL LOOR G EANIN

ug310-5880_9200E_406.indd 8

Before You Clean

BRUSH SUCTION

1. 2. 3. 4.

Plan activities to give your carpet time to dry. Move furniture to another area if cleaning an entire room (optional). Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

S H TA E R R

ATTENTION: a Some Berber carpets have
tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 15.

Carpet Cleaning

Fill the 2-in-1 water tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink. lifting up on the tank latch which is located on the back of the tank. Remove the top of the tank by lifting up on the handle.
1a. Unlatch the top of the tank from the bottom by 1b.
Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.
1c. Fill the heavy duty bladder with clean hand hot
tap water. *Do not boil or microwave water as it can destroy the bladder. 1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top part of the tank to the bottom, carefully hook the lip on the top tank into the groove on the bottom tank. 1e. Fasten tanks together by securing the latch in the back. 1b 1c
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank.

Lip Groove

(underside of bottom tank)

6/9/06 4:25:39 PM

ug310-5880_9200E_406.indd 9
Carpet Cleaning (Continued)
Fill the formula tank. Fill up the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank into the slot in the back of the machine for a snug fit. Set Custom Clean dial. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or rinse) and the ProHeat 2X will adjust the right amount of cleaning formula to mix with the heated water to fit your cleaning need. Set Ready Tools dial to the floor cleaning setting. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow one minute for the built-in heater to warm-up before cleaning. The ProHeat 2X will be fully warmed and will provide optimal performance after one minute of continuous heated cleaning. Cleaning strokes. While pressing the spray trigger, make one slow forward wet pass and another one back. Let the built-in heater, formula, and DirtLifter PowerBrushes do the work for you. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.
Release the spray trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until water being pulled up appears clean. Continue passes without pressing the spray trigger until you cant see any more water being pulled up. After cleaning, you may want to turn the Custom Clean dial to rinse to give your carpeting a final water only rinse. This will ensure thorough removal of embedded dirt loosened by the formula. BISSELL Deep Cleaning Formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer.
WARNING: and To Reduce the Risk of Fire
Electric Shock due to internal component damage, use only BISSELL Deep Cleaning Formulas intended for use with the deep cleaner.
Keep plenty of genuine BISSELL Deep Cleansing Formula and Scotchgard protector cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning Formulas. Non-BISSELL cleaning formulas may harm the machine and void the warranty.
ug310-5880_9200E_406.indd 10
Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water. on the tank latch which is located on the back of the tank.
7a. Unlatch the top of the tank from the bottom by lifting up 7b. Remove the top of the tank by lifting up on the handle. 7b
7c. Lift the bottom portion of the tank and pour out
dirty water toward the sink through the triangular shaped opening in the corner of the tank.
Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away.
7d. Fill the heavy duty bladder with clean hand hot tap
water, following instructions 1c through 1e on page 9.
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time and refill as needed.
Rinse (Optional). Rinsing is an optional step that can be done during the cleaning process by switching from one of the clean settings on the Custom Clean dial to a rinse setting, or it can be done after the carpeted area has been cleaned. Simply choose the 8a rinse setting on the Custom Clean dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the spray trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the spray trigger. Continue this until the water you see coming up the nozzle is clear.

After Cleaning

Machine Storage
Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain filled and ready to go, or it can simply be emptied back into the formula bottle if that is more convenient.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
WARNING: fire, To reduce the risk of
electric shock or injury, unplug from the outlet before servicing.

6/9/06 4:25:40 PM

ug310-5880_9200E_406.indd 11
After Cleaning (Continued)

Machine Care

For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete.

Filter

Turn power and heater switches OFF (O). Unplug the machine and wrap the power cord. After emptying the 2-in-1 water tank, rinse it out at a faucet with running hand hot tap water, taking care to clean underneath the heavy duty bladder and all around it. The top half of the tank can be rinsed clean through the nozzle area. Also, pop out the red filter underneath the top half of the tank and rinse that out. Replace before putting the top and bottom halves of the tank together. Before you place the cleaned 2-in-1 water tank back onto the machine, simply unscrew the nozzle using a Phillips head screwdriver. This can be rinsed out at the faucet. Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine. Secure into place with the screw. The inside of the end caps by the brush rolls can be wiped out with a clean paper towel, or, if a more thorough cleaning is desired, the end caps can be taken off using a Phillips head screwdriver and rinsed clean. Replace after cleaning. Any loose hair or debris can be pulled from the brush rolls and thrown away. For the most thorough clean before storage, follow directions on pages 17 & 18 for removal and replacement of the brush rolls and belts. To clean attachments that may have been used, remove from hose and rinse in clean, running water. Dry and replace attachment in the tool caddy. Clean the flex hose by suctioning clean water from the tap. Before replacing, lift end of flex hose and stretch out to ensure all water is cleared from flex hose. Refer to page 14, illustrations 9 & 10. After carpet is dry, vacuum again to remove hair and fuzz.

Let all parts dry completely before storing
ug310-5880_9200E_406.indd 12

6/9/06 4:25:41 PM

Post-Treatment Scotchgard Protector* (Optional)
Some models are equipped with a Scotchgard protector post-treatment applicator and cartridge. Using this, along with one of the BISSELL Deep Cleaning Formulas containing Scotchgard, to help retain the carpet cleanliness achieved with the ProHeat 2X machine. For best results, the post cleaning treatment should be applied while the carpet is still damp. It is recommended that the Scotchgard protector be applied every 12 months to all clean carpeted areas, and after every deep cleaning for high traffic areas such as entryways and stairs.

10. 11. 12.

Immediately after cleaning and rinsing your carpets, empty the 2-in-1 water tank and refill the heavy duty bladder with clean hand hot tap water. Set Ready Tools dial to the hose/attachment setting. Purge the hose to eliminate cleaning formula from the tube by spraying clean water through the flex hose (without attachments) into a sink for 15-30 seconds. Attach Scotchgard protector post-treatment cartridge to the applicator tool, following the instructions on the cartridge. Attach the combined tool/cartridge to the flex hose. The water from the 2-in-1 water tank will automatically mix with the concentrated Scotchgard protector post-treatment formula contained in the cartridge. Turn the Custom Clean dial to the rinse/protect setting. Before applying Scotchgard protector to a large area, test in a small, hidden area for colourfastness. Examine area when dry. If colour is affected, do not use. For use on upholstery, look for manufacturers cleanability code tag. Use only on fabrics coded W or WS. If coded S or X, do not use. Not recommended for use on velvet, silk vinyl, leather, or 100% cotton upholstery. Apply Scotchgard protector in a slow sweeping motion with a slight overlap of the treated area. For best coverage, follow the guide on the cartridge. One 8 oz. cartridge protects 200 square feet (18.6 sq. meters). This is equal to two average size rooms, (each at 10 x 10 ft. or 3 x 3 meters). Periodically check the level in the bottle to ensure the best coverage. Be careful not to spray the Scotchgard protector onto furniture or fabric that has not been tested for colourfastness. If this does occur, wipe off the Scotchgard protector. When finished remove the cartridge from the applicator tool. If formula is left, replace the cap to the cartridge and store at room temperature for later use. With the applicator tool still on the end of the flex hose, spray clean hand hot tap water into the sink to avoid any future clogging. Let dry before storing. Store applicator tool in a convenient location for use the next time.

If clogged, soak applicator tool in hand hot tap water before using.
ug310-5880_9200E_406.indd 13
Cleaning with Attachments
Your ProHeat 2X machine comes equipped with a flex hose and at least one cleaning tool for cleaning stairs, upholstery, and more.
Important! If using to clean upholstery, check upholstery tags. A. Check manufacturers tag before cleaning. W or WS on the tag means you can use your ProHeat 2X. If the tag is coded with an X or an S (with a diagonal stripe through it), or says Dry Clean Only, do not proceed with any deep cleaning machine. Do not use on Velvet or Silk. If manufacturers tag is missing or not coded, check with your furniture dealer. B. Check for colourfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Coloured stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds. Follow the instructions on pages 9 & 10 for filling the 2-in-1 water tank and the formula tank. Set Ready Tools dial to the hose attachments setting. This will allow spray and suction from the flex hose. Set Custom Clean dial for heavy traffic, normal clean, light clean, or rinse, as desired Attach the cleaning tool to the end of the hose. Plug in and turn on the power switch.

Manufacturers tag

WARNING: To reduce the risk of
injury, be extra careful when cleaning stairs. Make sure machine is secure and level.
bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg

2. 3. 4. 5. 6.

Note: The built-in heater heats the cleaning formula for carpet and hard floor application only. It does not heat the cleaning formula through the accessory tools.
Clean by pressing the spray trigger to spray formula onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. 9 Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. It is recommended that you suction clean water from the tap to rinse out the flex hose. out to ensure all water is cleared from flex hose.
10. Before replacing, lift end of flex hose and stretch 11. Coil flex hose around the tool caddy. 12. Empty 2-in-1 water tank and rinse out, following the

instructions on page 11.

13. Return Ready Tools dial to floor setting.
ug310-5880_9200E_406.indd 14

6/9/06 4:25:42 PM

Cleaning Formula Section
Keep plenty of genuine BISSELL Deep Cleaning Formula and Scotchgard protector post-treatment cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning Formulas.

11. Allow adequate time for floors to dry. 12. Remove hard floor tool, rinse and dry before storing. 13. If any formula remains in the formula tank, pour 14.
it back into the Hard Floor Solutions bottle for use the next time. Rinse out the formula tank.
ug310-5880_9200E_406.indd 16

6/9/06 4:25:45 PM

Small Belt Removal and Replacement Instructions
Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below.
1. 2. 3. 4. 5. 6. 7. 8. 9.
Turn off the machine, and unplug it from the outlet. Remove both the 2-in-1 water tank and the formula tank. Set aside. Unscrew the nozzle and remove it. Set aside. Turn the machine on its side. IMPORTANT: Make sure that the cord side is down. Remove the clear end cap by unscrewing the 2 black screws. Take care not to drop the screws into the unit. Remove 1 silver screw. Remove pivot arm by gently lifting up. Remove small brush belt. Replace small brush belt, and reverse steps above.
ug310-5880_9200E_406.indd 17
Brush Removal and Large Belt Replacement Instructions
Brushes can be removed for cleaning or replacement as needed.

4. 5. 6. 7. 8.

Follow Small Belt Removal Instructions on page 17. Remove brush rolls by pulling them off of the metal rods. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit. Re-attach the long belt on the bottom to the cogs of the small roller brushes. Place small belt over back roller and metal cog. Place pivot arm in place and screw in place using the silver screw. Re-attach clear end cap by tightening with the (2) black screws. Return nozzle to front of unit, by latching from underneath and then securing with a screw. If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call BISSELL Consumer Services in the UK at 0870.225.0109, in Australia at 1.800.811.183 or in New Zealand at 0800.247.735. For all other countries call our U.S. A. Headquarters at 616.453.4451 or visit the BISSELL Website: www.bissell.com
ug310-5880_9200E_406.indd 18

6/9/06 4:25:46 PM

Troubleshooting
WARNING:fire, To reduce the risk of
electric shock or injury unplug from the outlet before servicing.
Built-in heater ready light does not illuminate

Possible Cause Remedies

1. The heater switch is not turned ON ( I ). 2. The power switch is not turned ON ( I ).
1. Turn the heater switch ON ( I ). 2. Both switches must be ON ( I ) to activate the heater ready light.

Remedies

Reduced spray or no spray.

Possible Cause

1. 2-in-1 water tank may be empty. 2. Formula tank may be empty. 3. 2-in-1 water tank may not be seated completely. 4. Pump may have lost prime.
1. Fill heavy duty bladder with hand hot tap water. 2. Fill formula tank with BISSELL Deep Cleaning Formula for cleaning. 3. Turn power switch OFF ( O ). remove and reseat 2-in-1 water tank. 4. Turn power switch OFF ( O ) and then back ON ( I ). Wait one minute, then depress spray trigger.
DirtLifter PowerBrushes do not turn
1. The brush is off or broken.
1. Turn power switch OFF ( O ) and unplug unit from outlet. Follow instructions on page 17. 2. Brushes only rotate when unit is reclined using the detent pedal.
2. The unit is in the upright position.
3. Circuit breaker may have tripped.
3. Turn the power switch OFF ( O ) and
unplug from outlet. Check to see if foreign object is caught in brush roll. remove object. Plug machine back in to reset circuit breaker.
Scotchgard protector applicator tool is not spraying
1. Cartridge is not connected to the tool. 2. Ready Tools dial on floor setting.
1. Follow instructions on cartridge to assure proper fit. 2. Set Ready Tools dial to hose attachments setting.
3. Formula clogging the spray trigger.
3. Soak applicator tool only in hand hot
water. Spray without the cartridge attached to purge any residual formula left in the applicator tool.
ug310-5880_9200E_406.indd 19
Troubleshooting (Continued)
Cleaner not picking up solution

Possible Causes

1. Ready Tools dial may be at wrong setting.
2. 2-in-1 water tank may not be seated properly.
3. 2-in-1 water tank may not be assembled properly.
4. Formula or 2-in-1 water tank is empty. 5. 2-in-1 water tank has picked up maximum dirty water and red float door has closed. 6. Red float "door" in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly.
Remedies 1. Set Ready Tools dial to either floor cleaning or hose attachments setting. 2. Pick up both the 2-in-1 water tank and formula tank and reseat them so they fit snugly on the unit. 3. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bottom of 2-in-1 water tank (see page 9). 4. Check water levels in heavy duty bladder and formula tank. 5. Empty 2-in-1 water tank. Refill heavy duty bladder with clean hand hot tap water and replace. 6. Turn the machine OFF ( O ), allowing red float door to release into the open position. Turn unit back ON ( I ) to continue cleaning. Be sure your forward and backward strokes are done at a slower pace.

ug310-5880_9200E_406.indd 20

6/9/06 4:25:47 PM

BISSELL Consumer Services
If your BISSELL product should require service:
In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. If you have questions about your warranty or need replacement parts please contact the numbers below.
For UK inquiries: Monday - Thursday 9 am 5 pm Friday 9 am 4 pm BISSELL Homecare (Overseas) Inc. The Boat Yard 105 Straight Road Old Windsor Berkshire, SL4 2SE United Kingdom Telephone: 0870-225-0109 For New Zealand inquiries: Monday - Friday 9 am 5 pm Parex Appliances 103 Central Park Drive Henderson Auckland New Zealand Telephone: 0800-247-735
For Australian inquiries: 24 hours a day 7 days a week E.D. Oates Pty Ltd 76 - 82 Newlands Road Reservoir VIC 3073 Australia Telephone: 1-800-811-183
For all other inquiries: Monday - Friday 8 am 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids, MI 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383
Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See Warranty on page 24 for details. Please do not return this product to the store.
ug310-5880_9200E_406.indd 21
Replacement Parts - BISSELL ProHeat 2X
Replacement Parts* Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.

Part No.

203-6651 203-6652 203-6653 203-6654 203-6655 203-6692 203-6691 203-6611 203-6660 203-6618 203-6601 203-6675 203-6676 203-6677 203-6678 203-6679 203-6680 203-6681 203-6682 203-6685 203-6686 203-6688 203-6804 203-6689 203-6690 710E 720E 730E 740E 750E 0484 0464

Part Name

3 Tough Stain Tool Powered TurboBrush Hand Tool 4 Upholstery Tool 6 Wide Stair Tool Spraying Crevice Tool Hard Floor Tool Scotchgard Applicator Tool Grey Tank Assembly (complete) for Black unit (Blue or Purple complete tank assemblies available upon request) Grey Tank Lid (Blue or Purple Tank Lids available upon request) Grey Tank Bottom (Blue or Purple Tank Bottoms available upon request) Hose Assembly Cap and Insert for Water Tank Formula Tank (includes Cap & Insert for Formula Tank) Cap and Insert for Formula Tank Front Nozzle (includes gasket) Autoload Gasket (fits both Water and Formula Tank) Filter with Door Water Tank Latch Cord Wrap (Black) (Blue or Purple cord wrap available upon request) Clear End Cap w/Edge Brushes (2 pack, includes screws) Brush Roll 6 row (includes 1 brush, axle, 2 swivel arms) Small Brush Belt (non-cord side) Large Brush Belt (cord side) Hose Secure Latch Hose Rack Assembly (Top/Bottom Hose Rack, Screws) 1.42 L Fiber Cleansing Formula with Scotchgard protector 1.42 L Multi-Allergen Removal Formula with Scotchgard protector 1.42 L Pet Odor and Soil Removal Formula with Scotchgard protector 1.42 L Natural Orange Extract Formula with Scotchgard Protector 1.42 L Lavender Essence Formula with Scotchgard protector 32 oz. Hard Floor Solutions Scotchgard Protector Post Treatment Cartridge

*Not all parts are included with every model.
ug310-5880_9200E_406.indd 22

6/9/06 4:25:48 PM

ug310-5880_9200E_406.indd 23
Warranty - BISSELL ProHeat 2X
This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc., will replace (with new or remanufactured components), at BISSELLs option, free of charge from the date of purchase by the original purchaser, for two years any defective or malfunctioning part do to manufacturers defect. This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the Users Guide is not covered.
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELLS LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. *EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
2006 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 310-5880 Rev 6/06 Visit our website at: www.bissell.com Scotchgard is a trademark of 3M
ug310-5880_9200E_406.indd 24

6/9/06 4:25:51 PM

BISSELL PROheat 2X $20 Mail in Rebate
Receive a Mail in Rebate with the purchase of a BISSELL PROheat 2X deep cleaner. Offer valid on purchases made May 11, 2011 through May 22, 2011.
Name: ________________________________________________________________ Address: ________________________________________ Apt. #______________
City:____________________________State:_____________ Zip:________________ E-mail Address: ________________________________________________________
*refer to terms and conditions on back for complete details
Official BISSELL PROheat 2X Mail in Rebate Offer Offer Expires May 22, 2011
Terms and Conditions: Purchase a BISSELL PROheat 2X (Model # 9200, UPC # or Model # 9200-A, UPC # 03806 4) to be eligible for a $20 Mail in Rebate. Qualifying products must be purchased between May 11, 2011 and May 22, 2011. Submit this completed redemption certificate, dated cash receipt for proof of purchase (circle qualifying product(s) purchased), and the UPC barcode(s) cut from the box. Hand written invoices and/or copies of UPC barcodes will not be accepted. Claims that do not comply with the Terms and Conditions of this offer will be rejected. Allow 6-8 weeks for delivery. To check rebate status, please visit www.cmspromocheck.com.
Mail to: CMS Rebate Center Attn: BISSELL Homecare, Inc BSLPROH03 PO Box 426008 Del Rio, TX 78842-6008
Keep copies of all materials submitted. Original materials submitted become BISSELL property and will not be returned. Redemption certificate submissions must be postmarked by May 30, 2011. Valid only in the U.S.; International submissions are not valid. Limit one rebate per address. Not valid with any other offer. Void where prohibited, taxed, or restricted by law. Only street or rural route address accepted (P.O. Box will be denied). Reproduction, sale, or purchase of this redemption certificate is prohibited. Fraudulent submission could result in federal prosecution under mail fraud statutes. (Title 18, United States Code, Section 1341 and 1342). BISSELL Homecare, Inc. is not responsible for late, stolen, non-deliverable, or misdirected mail.