Reviews & Opinions
Independent and trusted. Read before buy Black Decker 900 Series!

Black Decker 900 Series

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Black   Decker 900 SeriesBlack & Decker 0220 Weitech Electronic Pest Repeller


Details
Brand: Black & Decker
Part Numbers: 0220, 220
UPC: 095919202041


Here you can find all about Black Decker 900 Series, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your Black Decker 900 Series photo ]

Video review

Black & Decker VH900 Corded Handheld Vacuum Cleaner

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
Convert 12:10pm on Tuesday, June 29th, 2010 
On a Charge A spare battery when you have that all important event running is invaluable.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

UK Ireland Australia New Zealand

Intended use

Your Black & Decker jigsaw has been designed for sawing wood, plastics and sheet metal. This tool is intended for consumer use only. b.

General safety rules

Warning! Read all safety warnings and all instructions. Failure to follow all instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power d.
tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards
4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will make sure that the safety of the power tool is maintained. Specific safety instructions for jigsaws Hold the tool by the insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. Keep hands away from cutting area. Never reach underneath the work piece any reason. Do not insert fingers or thumb into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the saw by gripping the shoe. Keep blades sharp. Dull or damaged blades may cause the saw to swerve or stall under pressure. Always use the appropriate type of saw blade for the workpiece material and type of cut. When cutting pipe or conduit, make sure that they are free from water, electrical wiring, etc. Do not touch the workpiece or the blade immediately after operating the tool. They can become very hot. Be aware of hidden hazards, before cutting into walls, floors or ceilings, check for the location of wiring and pipes. The blade will continue to move after releasing the switch. Always switch the tool off and wait for the saw blade to come to a complete standstill before putting the tool down. Warning! Contact with, or inhalation of dusts arising from cutting applications may endanger the health of the operator and possible bystanders. Wear a dust mask specifically designed for protection against dust and fumes and ensure that persons within or entering the work area are also protected. Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Additional safety instructions for non-rechargeable batteries Never attempt to open for any reason. Do not store in locations where the temperature may exceed 40 C. When disposing of batteries, follow the instructions given in the section "Protecting the environment". Do not incinerate the batteries. Under extreme conditions, battery leakage may occur. When you notice liquid on the batteries, proceed as follows: - Carefully wipe the liquid off using a cloth. Avoid skin contact. Additional safety instructions for lasers Read all of this manual carefully. This product is not to be used by children under 16. Laser radiation. Do not look into the laser beam. Do not use optical tools to view the laser beam. This laser complies with class 2 according to IEC 60825+A1+A2:2001. Do not replace a laser diode with a different type. If the laser is damaged, have the laser repaired by an authorised repair agent. Do not use the laser for any purpose other than projecting laser lines. An exposure of the eye to the beam of a class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate protection. At distances greater than 1m, the laser complies with class 1 and is therefore considered completely safe. Never look into the laser beam directly and intentionally. Do not use optical tools to view the laser beam. Do not set up the tool where the laser beam can cross any person at head height. Do not let children come near the laser.

Features 1. Lock-on button 2. On/off switch 3. Blade storage compartment cover 4. Shoe plate locking lever 5. Dust extraction outlet 6. Dust extraction adaptor 7. Shoe plate 8. Auto SelectTM dial 9. Blade support roller 10. Tool-free blade clamp Additional features (fig. A) Additional features may be applicable depending upon the product purchased. The additional features applicable to the catalogue number purchased are shown in fig. A.
Adjusting the shoe plate for bevel cuts (fig. E and F) Warning! Never use the tool when the shoe plate is loose or removed. The shoe plate (7) can be set to a left or right bevel angle of up to 45. Pull the shoe plate locking lever (4) outwards to unlock the shoe plate (7) from the 0 deg position (fig. E). Pull the shoe plate (7) forward and set the required bevel 15, 30 and 45 indicated in the bevel angle window. Push the shoe plate locking lever (4) back towards the saw to lock the shoe plate (7). To reset the shoe plate (7) for straight cuts: Pull the shoe plate locking lever (4) outwards to unlock the shoe plate (7). Set the shoe plate (7) to an angle of 0 and push the shoe plate backwards. Push the shoe plate locking lever (4) back towards the saw to lock the shoe plate (7).

Assembly

Warning! Before attempting any of the following operations, make sure that the tool is switched off and unplugged and that the saw blade has stopped. Used saw blades may be hot. Fitting the saw blade (fig. B) Hold the saw blade (11) as shown, with the teeth facing forward. Push and hold the blade clamp (10) down. Insert the shank of the saw blade into the blade holder (12) as far as it will go. Release the blade clamp (10). Saw blade storage (fig. C) Saw blades (11) can be stored in the storage compartment located on the side of the tool. Open the cover (3) of the saw blade storage compartment by holding the tab on the top of the cover (3) and pulling it outward. The blades are retained in the compartment by a magnetic strip. To remove a blade, press down on one end of the blade to raise the other end, and remove. Close the cover (3) of the saw blade storage compartment and make sure that it is latched closed. Warning! Close the compartment door securely before operating the saw. Connecting a vacuum cleaner to the tool (fig. D) An adaptor is required to connect a vacuum cleaner or dust extractor to the tool. The dust extraction adaptor (6) can be purchased from your local Black & Decker retailer. Push the adaptor (6) into the dust extraction outlet (5). Connect the vacuum cleaner hose to the adaptor (6).

How to use the Auto SelectTM dial (fig. G) This tool is fitted with a unique Auto SelectTM Dial (8) to set the speed and the pendulum blade action for various cutting applications. To select the optimum speed and pendulum blade action for the type of material being cut, turn the dial (8) as shown in the table below: Icon Application Speed/Pendulum Blade Type Kitchen work surfaces, Fast speed, No General wood work tops, laminate pendulum board Scrolling/curves/ Fast speed, No craftwork, hardwoods, pendulum decking, flooring Plywood and wood panels Scrolling wood General wood
Fast speed, medium General wood pendulum
General timber, soft Fast speed, max wood, fast rip cutting pendulum

General wood

Plastics, Perspex, PVC
Medium speed, General purpose medium pendulum
Sheet metal tin plate, Low speed, No ceramic tile, fibreglass pendulum sheet Slow speed, precision Slow speed, No start pendulum Switching on and off To switch the tool on, press the on/off switch (2). To switch the tool off, release the on/off switch (2). For continuous operation, press the lock-on button (1) and release the on/off switch (2). To switch the tool off when in continuous operation, press the on/off switch (2) and release it. Sawing Hold the tool firmly with both hands while cutting. The shoe plate (7) should be held firmly against the material being cut. This will help prevent the saw from jumping, reduce vibration and minimise blade breakage. Let the blade run freely for a few seconds before starting the cut. Apply only a gentle pressure to the tool while performing the cut.
Metal or ceramic or fibreglass blade Choose the correct blade for the application
Operating the laser (fig. H - K) (L units only) Installing the batteries (fig. H) Detach the laser module (14) from the jigsaw by removing the screw (13) and pulling the laser module forward. Insert two new 1.5 Volt AAA alkaline batteries, making sure to match the (+) and (-) terminals correctly. Re-attach the laser module (14). Adjusting the laser side-to-side (fig. I) Note: The laser is intended as a cutting aid and does not guarantee a precise cut. Warning! Do not adjust the laser with the jigsaw plugged in. Use the laser adjustment screw (15) to align the laser line with the saw blade if needed. The laser visibility (power) will be reduced if the jigsaw is overheated. The laser may not be visible when the saw is overloaded for a prolonged period of time. The laser visibility
will gradually return to normal when the tool cools down even when the tool is unplugged. Warning! Do not leave the overheated laser switched ON. Make sure that the switch is in the OFF position and remove the batteries to remove power from the laser. Using the laser (fig. J and K) The laser projects the line of cut (18) on to the surface of the workpiece. To switch the laser on, press the button (16). To switch the laser off, press the button (16) again. Viewing from directly above the jigsaw, the line of cut (17) can be easily followed. Should this view be restricted for any reason, the laser can be used as an alternative cutting guide. Use a pencil to mark the cutting line (17). Position the jigsaw over the line (17). Switch on the laser. Operating the work light (fig. L and M) ('W' units only) Units that include a 'W' in the catalogue number are provided with an LED light (19) to illuminate the area around the blade. To switch the work light on, slide the switch (20) to the on position (I). To switch the work light off, slide the switch (20) to the off position (0). Hints for optimum use Sawing laminates When cutting laminates, splintering may occur which can damage the presentation surface. The most common saw blades cut on the upward stroke, therefore if the shoe plate is sitting on the presentation surface either use a saw blade that cuts on the downward stroke or: Use a fine-tooth saw blade. Saw from the back surface of the workpiece. To minimise splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw through this sandwich. Sawing metal Be aware that sawing metal takes much more time than sawing wood. Use a saw blade suitable for sawing metal. When cutting thin sheet metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich. Spread a film of oil along the intended line of cut.

Maintenance

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Regularly clean the ventilation slots in your tool using a soft brush or dry cloth. Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner. Never let any liquid get inside the tool and never immerse any part of the tool into liquid. Mains plug replacement (U.K. & Ireland only) If a new mains plug needs to be fitted: Safely dispose of the old plug. Connect the brown lead to the live terminal in the new plug. Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your tool needs replacement, or if it is of no further use to you, think of the protection of the environment. Black & Decker repair agents will accept old Black & Decker tools and ensure that they are disposed of in an environmentally safe way. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.
At the end of their useful life, discard batteries with due care for our environment. Remove the batteries as described above. Place the batteries in suitable packaging to ensure that the terminals cannot be short-circuited. Take the batteries to a local recycling station. Technical data Voltage Rated input No-load speed Max. depth of cut Wood Steel Aluminium Weight (with laser) KS900 Series Vac 230 W 620 min-1 800-3200 mm mm mm kg kg 15 2.8 3.1 KS950 Series 800-2.8 3.1

make sure of the minimum inconvenience to the customer unless: The product has been used for trade, professional or hire purposes. The product has been subjected to misuse or neglect. The product has sustained damage through foreign objects, substances or accidents. Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our aftersales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk.
EC declaration of conformity
KS900 Series, KS950 Series Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN61000, IEC 60825+A1+A2:2001 LpA (sound pressure) 87 dB(A), LWA (acoustic power) 98 dB(A), hand/arm weighted vibration <6.87 m/s2 Kpa (sound pressure uncertainty 3 dB(A), Kwa (sound power uncertainty 3 dB(A), Kevin Hewitt Director of Consumer Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 24-06-2007

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to

doc1

KW900E

English

(Original instructions)

Intended use

Your Black & Decker router has been designed for routing wood and wood products. This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings
Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

The intended use is described in this instruction manual. The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury and/or damage to property.

Safety of others

Additional power tool safety warnings
This appliance/tool is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. u Children should be supervised to ensure that they do not play with the appliance.
Warning! Additional safety warnings for routers

Residual risks.

Hold the power tool by the insulated gripping surfaces, because the cutter may contact its own cord. Cutting a "live" wire may make exposed metal parts of the power tool "live" and shock the operator. u Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. Warning! Contact with, or inhalation of dusts arising from routing applications may endanger the health of the operator and possible bystanders. Wear a dust mask specifically designed for protection against dust and fumes and ensure that persons within or entering the work area are also protected. u Thoroughly remove all dust after routing. u Only use router bits with a shank diameter equal to the size of the collet installed in the tool. u Only use router bits suitable for the no-load speed of the tool. u Never use router bits with a diameter exceeding the maximum diameter specified in the technical data section. u Do not use the tool in an inverted position. u Do not attempt to use the tool in a stationary mode. u If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid hazard. u Take special care when routing where the paint is possibly lead based or when routing some woods which may produce toxic dust: Do not let children or pregnant women enter the work area. Do not eat, drink or smoke in the work area. Dispose of dust particles and any other debris safely.

Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or accessories. u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. u Impairment of hearing. u Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure. Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.
When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.
Fitting the edge guide (fig. B)
The edge guide helps to guide the tool parallel to an edge. u Fit the bars (14) to the edge guide (15) using the two screws (16) provided. u Insert the bars (14) into the router base as shown. u Set the edge guide to the required distance. u Tighten the fixing screws (17).

Labels on tool

Fitting the dust extraction adaptor (fig. C)
The following pictograms are shown on the tool: Warning! To reduce the risk of injury, the user must read the instruction manual.
The dust extraction adaptor allows you to connect a vacuum cleaner to the tool. u Connect the hose (18) of the vacuum cleaner to the adaptor (11).

Electrical safety

This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
Fitting the template guide (fig. D)
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Fit the template guide (19) to the base of the router, with the flange to the bottom (workpiece) side. u Insert the two long screws (20) from the bottom side through the template guide and the holes in the base. u Place a nut onto each of the screws and securely tighten the nuts. Fit the distance piece (21) to the base of the router using the screws provided.
Fitting the distance piece (fig. E)

Features

1. On/off switch 2. Lock-off button 3. Variable speed control knob 4. Plunge lock lever 5. Spindle lock button 6. Collet 7. Revolver depth stop 8. Chip deflector 9. Depth stop bar 10. Depth of cut scale 11. Dust extraction adaptor
Fitting the centring pin (fig. F)
Fit the edge guide to the router as shown in fig. B, but upside down. u Fit the centring pin (22) to the workpiece side of the edge guide with the screw (23) provided. Fit the edge guide to the router as shown in fig. B. Fit the L' bar (24) to the upper side of the edge guide using the two screws and nuts provided. u Adjust the rotating attachment (25) on the L' bar with the wing knob (26).
Fitting the copy follower (fig. G)

Assembly

Warning! Before assembly, make sure that the tool is switched off and unplugged.
Fitting a router bit (fig. A)
Remove the chip deflector (8). Keep the spindle lock button (5) depressed and rotate the spindle until the spindle lock fully engages. u Loosen the collet nut (12) using the spanner provided. u Insert the shank of the router bit (13) into the collet (6). Make sure that the shank protrudes at least 3 mm from the collet as shown. u Keep the spindle lock button (5) depressed and tighten the collet nut (12) using the spanner provided.

Warning! Let the tool work at its own pace. Do not overload. u Carefully guide the cable in order to avoid accidentally cutting it.
Adjusting the depth of cut (fig. H, I & J)
The depth of cut is the distance X between the depth stop bar (9) and the depth stop (27). The depth of cut can be set in two different ways as described below.
Adjusting the depth of cut using the scale (fig. I) u Fit the router bit as described above. u Loosen the locking screw (28). u Pull the plunge lock lever (4) up. u Plunge the router down until the router bit touches the workpiece. u Push the plunge lock lever (4) down. u Move the pointer (29) in the zero position on the scale (10). u Add the desired depth of cut to the starting position. u Move the depth stop bar (9) to the calculated position on the scale. u Tighten the locking screw (28). u Fine adjust using the adjusting knob (30). u Pull the plunge lock lever (4) up and let the router return to its original position. u After switching the router on, plunge it down and make the desired cut. Adjusting the depth of cut using a piece of wood (fig. J) u Fit the router bit and plunge the router down as described above. u Pull the depth stop bar (9) up. u Place a piece of wood with a thickness equal to the desired depth of cut between the depth stop (27) and the depth stop bar (9). u Tighten the locking screw (28). u Fine adjust using the adjusting knob (30). u Remove the piece of wood. u Pull the plunge lock lever (4) up and let the router return to its original position. u After switching the router on, plunge it down and make the desired cut.
Place the batten onto the workpiece. Move the batten until it is in the correct position to guide the tool. u Securely clamp the batten to the workpiece.
Using the template guide (fig. D)
The template guide can be used to make a cutout shape from a template, for instance a letter. u Secure the template over the workpiece with double-sided tape or G' clamps. u The router bit must extend below the flange of the template guide, to cut the workpiece in the shape of the template.

Using the distance piece (fig. E)
The distance piece can be used for trimming wooden or laminate vertical projections.
Using the centring pin (fig. F)
The centring pin can be used to cut out circular patterns. u Drill a hole for the point of the centring pin in the centre of the circle to be cut. u Place the router on the workpiece with the point of the centring pin in the drilled hole. u Adjust the radius of the circle with the bars of the edge guide. u The router can now be moved over the workpiece to cut out the circle.
Using the copy follower (fig. G)
Adjusting the revolver depth stop (fig. K)
After turning the revolver depth stop to the desired setting, you can fine-adjust the depth stop to be used. If you want to make several cuts with a different depth of cut, adjust each of the depth stops. u Turn the depth stop screw (31) up or down as required using a screwdriver.
The copy follower helps to maintain an equal cutting distance along the edge of irregularly shaped workpieces. u Place the router on the workpiece at the desired distance from the edge to be copied. u Adjust the bars of the edge guide until the wheel is in contact with the workpiece.

Switching on and off

Switching on u Keep the lock-off button (2) depressed and press the on/ off switch (1). u Release the lock-off button. Switching off u Release the on/off switch. Warning! Always operate the tool with both hands.

Setting the speed

Set the speed control knob (3) to the required speed. Use a high speed for small diameter router bits. Use a low speed for large diameter router bits.
Using a batten as a guide (fig. L)
When it is not possible to use the edge guide, for example when routing grooves in the back panel of a bookcase to support shelves, proceed as follows: u Select a piece of wood with a straight edge to use as a batten.

Hints for optimum use

When working on outside edges, move the tool counterclockwise (fig. M). When working on inside edges, move the tool clockwise. u Use HSS router bits for softwood.
Use TCT router bits for hardwood. You can use the tool without a guide (fig. N). This is useful for signwriting and creative work. Only make shallow cuts. u Refer to the table below for common types of router bits.

Router bits (fig. O)

Description Application Straight bit (1) Grooves and rebates Trimming bit (2) Trimming laminates or hardwood; accurate profiling using a template Rebating bit (3) Rebates on straight or curved workpieces V-grooving bit (4) Grooves, engraving and edge bevelling Core box bit (5) Fluting, engraving and decorative edge moulding Cove bit (6) Decorative edge moulding Ogee moulding bit (7) Decorative edge moulding Rounding over bit (9) Rounding over edges Dovetail bit (10) Dovetail joints Chamfer bit (11) Chamfer edges
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Technical data KW900E Type 1 Input voltage VAC 230 Power input W 1,200 No-load speed min-1 8,000 - 27,000 Collet size 5/16" (8 mm) / 1/4" (6.35 mm) / 6 mm Max. diameter of router bit mm 30 Max. depth of cut mm 55 Weight kg 3.6 Level of sound pressure according to EN60745: Sound pressure (LpA) 95 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 106 dB(A), uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN60745: Vibration emission value (ah) 5.77 m/s2, uncertainty (K) 1.5 m/s2

Maintenance

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Warning! Before performing any maintenance, switch off and unplug the tool. u Regularly clean the ventilation slots in your tool using a soft brush or dry cloth. u Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted: u Safely dispose of the old plug. u Connect the brown lead to the live terminal in the new plug. u Connect the blue lead to the neutral terminal. u Connect the green/yellow lead to the earth terminal. Warning! Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

EC declaration of conformity

MACHINERY DIRECTIVE

Guarantee
Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN60745-1, EN60745-2-17 For more information, please contact Black & Decker at the following address or refer to the back of the manual.
Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: u The product has been used for trade, professional or hire purposes; u The product has been subjected to misuse or neglect; u The product has sustained damage through foreign objects, substances or accidents; u Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk
The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker. Kevin Hewitt Vice-President Global Engineering Black & Decker Europe, 210 Bath Road, Slough, Berkshire, SL1 3YD United Kingdom 31/03/2010
ENGLISH Do not forget to register your product!
www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black&Decker in your country.

Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD

Tel. 03-Fax 03-9727 5940

Tel. +Fax +259 1122
Tel. Fax Helpline 01753 574277

90563671 REV-0

03/2010

 

Tags

F1DF102P Model 205A DCR-TRV16E Super NN-3454 CW-29K84V SC-D381 LT20-126A Powershot A430 32PF9986-12 Seiko ST01 Miniblue H5 Yamaha F60 HGA7T TP329 CLX-3175N SEE KDL-32T3000 Rocker C MS-6566E LK260 VL-Z500S Headset H300 BX3000T Easyshare C913 R719 Js01 SF-370 ETS P5260E PA-3100 Jumbo 3 RS-AZ7 EL-509VH TR888 RX1955 EL-6091 PT-1800 654 D S WL-AM604G SLV-L79HF HS 10 SKD-EW1288W Drive T785 HD TX409 BT8040 KT-748 TCS-100DV 7 5 LE26A456 LT 4688 Vizcam 1000 TH-37PV70F V-xpanded Deville 1997 Caddx NX-6 DMR-XW400 RR-969 MCS-1330 KV-21FT1E VRD-VC20 Thinkpad 570 Sciphone I68 SRE 704 Quest Stylus S21 KFX 90 5 KIT MS-2645DPA VMC-002 WA11VP DIR-300 KX-TG7150EX CS-100A Review 17 SL Le32R52B Voice Isdn K810I SC-DM3 GC8260 Chronographstopwatch 9000XLT Mod-2 FAX-L380 Sportback JBL L26 WS-9133U-it-CA MS-2335TL Synthex Connection Electronic Cdxa15 Adapter Ifinder H2O Wagon Kxtg8511FX DCR-SR78E KDL-40X2500 Satellite 1110 AJ-HD3700B

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101