Black Decker GK1635T
Here you can find all about Black Decker GK1635T like manual and other informations. For example: review.
Black Decker GK1635T manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Black Decker GK1635T please write about it to help other people. [ Report abuse or wrong photo | Share your Black Decker GK1635T photo ]
Black Decker GK1635T
User reviews and opinions
|hongkongfooey||6:51am on Saturday, August 7th, 2010|
|Newegg has come through and saved my family money giving me a top of the line toaster. It shipped very quickly. Got a great looking toaster froma quality brand at a great price.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
GK1630T GK1635T GK1640T
Your Black & Decker chainsaw has been designed for pruning and felling trees and cutting logs. This tool is intended for consumer use only.
General power tool safety warnings
Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional power tool safety warnings
Warning! Additional safety warnings for chainsaws
Keep all parts of the body away from the saw chain when the chainsaw is operating. Before you start the chainsaw, make sure the saw chain is not contacting anything. A moment of inattention while operating the chainsaw may cause entanglement of your clothing or body with the chainsaw. u Always hold the chainsaw with your right hand on the rear handle and your left hand on the front handle. Holding the chainsaw with the reversed hand configuration increases the risk of personal injury and should never be done. u Wear safety glasses and hearing protection. Further protective equipment for head, hands, legs and feet is recommended. Adequate protective clothing will reduce personal injury by flying debris or accidental contact with the saw chain. u Do not operate a chainsaw in a tree. Operation of a chainsaw while up in a tree may result in personal injury. u Always keep proper footing and operate the chainsaw only when standing on fixed, secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of the chainsaw. u When cutting a limb that is under tension be alert for spring back. When the tension in the wood fibres is released the spring loaded limb may strike the operator and/or throw the chainsaw out of control. u Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
Carry the chainsaw by the front handle with the chainsaw switched off and away from your body. When transporting or storing the chainsaw always fit the guide bar cover. Proper handling of the chainsaw will reduce the likelihood of accidental contact with the moving saw chain. u Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or lubricated chain may either break or increase the chance for kickback u Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss of control. u Cut wood only. Do not use chainsaw for purposes not intended. For example: do not use the chainsaw for cutting plastic, masonry or non-wood building materials. Use of the chainsaw for operations different than intended could result in a hazardous situation. u Position the cord so that it will not get caught on branches or similar when cutting. u The spiked bumber (16) may become sharp during the life of the product. handle with care. u When handling the product the chain bar may become hot, handle with care.
Causes and operator prevention of kickback Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the chainsaw which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your chainsaw. As a chainsaw user, you should take several steps to keep your cutting jobs free from accident or injury. Kickback is the result of tool misuse and / or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below: Maintain a firm grip, with thumbs and fingers encircling the chainsaw handles. With both hands on the chainsaw, position your body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are taken. Do not let go of the chainsaw. u Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chainsaw in unexpected situations.
Only use replacement guide bars and chains specified by the manufacturer. Incorrect replacement guide bars and chains may cause chain breakage and/ or kickback. u Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback. u Striking metal, cement or any other hard material near the wood, or buried in the wood can cause kickback. u A dull or loose chain can cause kickback. u Do not try to insert into a previous cut. As this could cause kickback. Make a fresh cut every time.
Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated. When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. Electrical safety
Safety recommendations for the chainsaw
We strongly recommend that first time users obtain practical instruction in the use of the chainsaw and protective equipment from an experienced user. Initial practice should be completed sawing logs on a saw horse or cradle. u Always check that the kickback brake operates correctly before use. u We recommend that when carrying the chainsaw that you make sure that the brake is engaged and the saw chain is facing backwards. u Maintain your chainsaw when not in use. Do not store your chainsaw for any length of time without first removing the saw chain and guide bar which should be kept immersed in oil. Store all parts of your chainsaw in a dry, secure place out of reach of children. u We recommend you drain the oil reservoir prior to storage. u Be sure of your footing and pre-plan a safe exit from a falling tree or branches. u Use wedges to help control felling and prevent binding the guide bar and saw chain in the cut. u Saw chain care. Keep the saw chain sharp and snug on the guide bar. Ensure the saw chain and guide bar are clean and well oiled. Keep handles dry, clean and free from oil and grease. Prepared timber. u Into the ground. u Into wire fences, nails. etc.
This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Using an extension cable
Always use an approved extension cable suitable for the power input of this tool (see technical data). The extension cable must be suitable for outdoor use and marked accordingly. Up to 30 m of HO7RN-F 2 X 1.5 mm extension cable can be used without loss of product performance. Before use, inspect the extension cable for signs of damage, wear and ageing. Replace the extension cable if damaged or defective. When using a cable reel, always unwind the cable completely. Prevent body contact with earthed or grounded surfaces (e.g. metal railings, lamp-posts etc.). Electric safety can be further improved by using a high-sensitivity (30 mA/ 30mS) Residual Current Device (RCD). Warning! The use of an RCD or other circuit breaker unit does not release the operator of your chainsaw from the safety instructions and safe working practices given in this user manual.
Guard against electric shock
The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.
Additional safety instructions
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. u Children should be supervised to ensure that they do not play with the appliance. u Ensure someone is nearby (but at a safe distance) in case of an accident. u If for any reason you have to touch the saw chain, make sure your chainsaw is disconnected from the mains. u The noise from this product can exceed 85 dB(A). We therefore recommend you take appropriate measures for the protection of hearing.
Directive 2000/14/EC guaranteed sound power.
To ensure continued safe operation, check the chain tension as described in this manual after every 10 minutes of use, and adjust back to a clearance of 3 mm as required.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or accessories. u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. u Impairment of hearing. u Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.)
1. On/off switch 2. Lock-off button 3. Oil cap 4. Front guard/chain brake 5. Oil level indicator 6. Chain 7. Guide bar 8. Chain sheath 9. Control knob 10. Chain cover assembly
Warning! Always wear protective gloves when working on your chainsaw. Warning! Before performing any maintenance on power tools, switch off and unplug the appliance.
Oiling the chain
Labels on tool
The following pictograms are shown on the tool: Warning! To reduce the risk of injury, the user must read the instruction manual.
Always wear ear and eye protection Do not expose the tool to rain or high humidity. Always remove the plug from the socket before inspecting a damaged cable. Be careful not to use your chainsaw if the cable is damaged.
You must do this whenever you use a new chain (6) for the first time. Take the new chain (6) and soak it in chain oil for at least an hour before using it. Use Black & Decker chain oil. We recommend that you use only Black & Decker oil during the lifetime of your chainsaw because mixtures of different oils could lead to the oil becoming degraded, which can drastically shorten the lifetime of the saw chain and create additional risks. Never use waste oil, thick oil or very thin sewing machine oil. These may damage your chainsaw.
Fitting the guide bar and chain. (fig. A - E)
Place the chainsaw onto a stable surface. Set the front guard/chain brake assembly to the forward position (fig. D). u Fully loosen the control knob (9) (fig. A). u Remove the chain cover assembly (10).
Place the chain (6) over the guide bar (7) making sure that the saw chain cutters on the upper part of the guide bar (7) face towards the front (fig. B). u Guide the chain (6) around the guide bar (7) and pull it to create a loop to one side at the rear end of the guide bar (7). u Guide the chain (6) around the drive sprocket (12). Place the guide bar (7) onto the bar location studs (13) (fig. E).
Allow the control knob to spring back to the out position and rotate further clockwise to tighten the guide bar. Do not overtighten.
Warning! Let the tool work at its own pace. Do not overload.
Filling the oil reservoir (fig. F)
Warning! Make sure that the front guard/chain brake assembly (4) is in the set (forward) position before refitting (fig. C). Before fitting the chain cover assembley check that the cam (11) (fig. B) is in the correct position. If necessary, press in and turn the control knob (9) clockwise to rotate the cam into the correct position. u Fit the chain cover by locating the bolt and using the control knob (9) to tighten the chain cover finger tight. u To tension the chain, loosen the control knob one full turn, press in firmly and rotate clockwise. As the bar moves forward make sure that the chain links feed into the guide bar. u Allow the control knob to spring back to the out position and rotate further clockwise to tighten the guide bar. Do not overtighten. u Check the tension as described below.
Remove the oil cap (3) and fill the reservoir with the recommended chain oil. You can see the oil level in the oil level indicator (5). Refit the oil cap (3). u Periodically switch off and check the oil level indicator (5); if it is less than a quarter full, disconnect your chainsaw from the mains supply and refill with the correct oil.
Note: It will not be possible to switch the tool on if the front guard/chain brake assembly is not in the "set" position. u Grip your chainsaw firmly with both hands. Push the lock-off button (2) and then push the on/off switch (1) to start. u When the motor starts, remove your thumb from the lock button (2) and grip the handle firmly. Do not force the tool, allow the tool to do the work. It will do a better and safer job at the speed for which it is designed. Excessive force will stretch the saw chain (6). How to set the chain brake (fig. C) u Make sure that the tool is disconnected from the mains supply. u Pull the front guard/chain brake assembly (4) back into the "set" (fig. C) position. u The tool is now ready to use. How the anti-kickback chain brake works In the event of kickback, your left hand comes in contact with the front guard, pushing it forwards, toward the workpiece, and stops the tool within a few fractions of a second. How to test the anti-kickback chain brake (fig. C) u Always check that the kickback brake operates correctly before use. u Grip the tool firmly in both hands on a firm surface make sure the saw chain (6) is clear of the ground and switch on (see" How to switch the chainsaw on"). u Rotate your left hand forward around the front handle so that the back of your hand comes in contact with the front guard/chain brake assembly (4) and push it forwards, toward the workpiece (fig. C). The saw chain (6) should stop within a few fractions of a second.
Checking and adjusting the chain tension (fig. G)
Before use and after every 10 minutes of use you must check the chain tension. u Disconnect the tool from the mains supply. u Lightly pull on the chain (6) as shown (inset fig. G). The tension is correct when the chain (6) snaps back after being pulled 3 mm away from the guide bar (7). There should be no "sag" between the guide bar (7) and the chain (6) on the underside. Note: Do not over-tension the chain as this will lead to excessive wear and will reduce the life of the guide bar and the chain. Note: When the chain is new, check the tension frequently (after disconnecting from the mains) during the first 2 hours of use because a new chain stretches slightly.
To increase the tension
Loosen the control knob one full turn, press in firmly and rotate clockwise untill the required tension is reached. As the bar moves forward make sure that the chain links feed into the guide bar.
To reset after the operation of the front guard/chain brake assembly (4) follow the instructions for "How to set the chain brake". Note: Avoid re-starting the tool until you hear the motor come to a complete rest. Note: If chain brake in malfunctioning take the product to an approved Black & Decker service centre. If the saw chain (6) or guide bar (7) becomes jammed u Switch the tool off. u Disconnect the tool from the mains supply. u Open the cut with wedges to relieve the strain on the guide bar (7). Do not try to wrench the chainsaw free. u Start a fresh cut. Inexperienced users should not attempt to fell trees. The user may suffer injury or cause damage to property as a result of failure to control the direction of fall, the tree may splinter or damaged/dead branches may fall during cutting. The safe distance between a tree to be felled and bystanders, buildings and other objects is at least 2 1/2 times the height of the tree. Any bystander, building or object within this distance is at risk from being struck by the tree when felled. Before attempting to fell a tree: u Make sure that there are no local by-laws or regulations that would prohibit or control the felling of the tree. u Consider all conditions that may affect the direction of fall, including: - The intended direction of fall. - The natural lean of the tree. - Any unusual heavy limb structure or decay. - Surrounding trees and obstacles including overhead lines and underground drains. - The wind speed and direction. Pre-plan a safe exit from falling trees or branches. Make sure that the exit route is clear of obstacles that would prevent or hinder movement. Remember that wet grass and freshly cut bark is slippery. u Do not attempt to fell trees where the tree diameter is greater than the cutting length of the chainsaw. u Cut a direction notch to determine the direction of fall. u Make a horizontal cut to a depth of between 1/5th and 1/3rd of the diameter of the tree, perpendicular to the line of fall at the base of the tree (fig. H). u Make a second cut from above to intersect with the first and make a notch of about 45. u Make a single horizontal felling cut from the other side 25 mm to 50 mm above the centre of the direction notch. (fig. I). Do not cut through to the direction notch, you could lose control of the direction of fall.
Drive a wedge or wedges into the felling cut to open it and drop the tree (fig. J).
Felling (fig. H - J)
Make sure that there are no local by-laws or regulations that would prohibit or control the pruning of the tree limbs. Pruning should only be undertaken by experienced users there is an increased risk of the saw chain pinching and kick back. Before pruning consideration should be given to conditions affecting the direction of fall including: u The length and weight of the branch to be cut. u Any unusual heavy limb structure or decay. u Surrounding trees and obstacles including overhead. u The wind speed and direction. u The branch being intertwined with other branches. The operator should consider access to the tree limb and the direction of fall. The tree branch is liable to swing towards the tree trunk. In addition to the user bystanders, objects and property below the branch will be at risk. u To avoid splintering, make the first cut in an upward direction to a maximum depth of one third the diameter of the branch. u Make the second cut downwards to meet the first.
Logging (fig. K - M)
How you should cut depends on how the log is supported. Use a saw horse whenever possible. Always start a cut with the saw chain running and the spiked bumper (16) in contact with the wood (fig. K). To complete the cut use a pivoting action of the spiked bumper against the wood. When supported along its whole length: u Make a downward cut, but avoid cutting the earth as this will blunt your saw chain quickly. When supported at both ends: u First, cut one third down to avoid splintering and second, cut again to meet the first cut. When supported at one end: u First cut one third up to avoid splintering and second, cut down to prevent splintering. When on a slope (fig. L): u Always stand on the uphill side. When attempting to cut a log on the ground (fig. L): u Secure the workpiece using chocks or wedges. The user or a bystander should not steady the log by sitting or standing on it. Make sure that the saw chain does not contact the ground.
When using a saw horse (fig. M): This is strongly recommended whenever possible. u Position the log in a stable position. Always cut on the outside of the saw horse arms. Use clamps or straps to secure the workpiece.
Regular maintenance ensures a long effective life for the tool. We recommend you make the following checks on a regular basis. Warning! Before performing any maintenance on power tools: u Switch off and disconnect you tool from the mains supply.
Problem Tool will not start Possible cause Lock button not pressed. Front guard in the brake position Blown fuse Tripped RCD Mains lead not connected Chain does not stop instantly when the tool is switched off Bar/chain appear hot/smoking Chain tension is too slack Possible sollution Press the lock button. Reset front guard Replace fuse Check RCD Check mains supply Check chain tension
The level in the reservoir should not be allowed to fall below a quarter full.
Saw chain and guide bar (fig. G)
After every few hours of use and before storage, remove the guide bar (7) and the saw chain (6) and clean them thoroughly. u Make sure that the guard is clean and free from debris. u On reassembling, turn the guide bar (7) through 180 and oil sprocket nose via the sprocket lubrication hole (15). This ensures an even distribution of wear around the guide bar rails.
Saw chain sharpening
Oil tank empty Oil hole blocked on chain bar Chain tension is too tight Guide bar sprocket nose needs greasing Check oil tank level Clean oil hole Check chain tension Oil the guide bar sprocket nose
If you are to get the best possible performance from the tool it is important to keep the teeth of the saw chain sharp. Guidance for this procedure is found on the sharpener package. For this purpose we recommend the purchase of the Black & Decker saw chain sharpening kit (available from Black & Decker service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or Black & Decker service agents. Always use genuine spare parts.
Chainsaw does not cut well Chainsaw not using oil
Chain on backwards Debris in tank Oil hole in cap blocked Debris in chain bar Debris in oil outlet
Check/modify chain direction Sharpen Empty oil from tank and replace Remove debris from hole Remove debris and clean the chain bar remove debris
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
Your chainsaw is manufactured in accordance with the relevant safety requirements. Repairs should only be carried out by a qualified person using original spare parts otherwise this may result in considerable danger to the user. We recommend you keep this user manual in a safe place.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted: u Safely dispose of the old plug. u Connect the brown lead to the live terminal in the new plug. u Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 10 A.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.
Technical data Bar length cm Voltage VAC Power input W Chain speed (no load) m/s Max cutting length cm Oil capacity ml Weight kg Safety class Bar length cm Voltage VAC Power input W Chain speed (no load) m/s Max cutting length cm Oil capacity ml Weight kg Safety class
GK1630T Typ. 180 3.7 II
GK1635T Typ. 180 3.8 II
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
GK1640T Typ. 180 3.9 II
Level of sound pressure according to EN 60745: Sound pressure (LpA) 92 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 103 dB(A), uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN60745: Vibration emission value (ah) 5 m/s2, uncertainty (K) 1.5 m/s2
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com
EC declaration of conformity
MACHINERY DIRECTIVE OUTDOOR NOISE DIRECTIVE
Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: u The product has been used for trade, professional or hire purposes; u The product has been subjected to misuse or neglect; u The product has sustained damage through foreign objects, substances or accidents; u Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk
GK1630T, GK1635T, GK1640T Black & Decker declares that these products described under "technical data" are in compliance with: 98/37/EC (until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009), EN 60745-1, EN 60745-2-13 2000/14/EC, Chain Saw, Annex V KEMA Quality B.V., Utrechtseweg 310, 6802 ED Arnhem, The Netherlands Notified Body ID No.: 0344 Level of accoustic power according to 2000/14/EC (Article 13, Annex III): LWA (measure sound power) 103 dB(A) Uncertainty = 3 dB(A) LWA (guaranteed sound power) 103 dB(A) Uncertainty = 3 dB(A) These products also comply with directive 2004/108/EC. For more information, please contact Black & Decker at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker. Kevin Hewitt Vice-President Global Engineering Black & Decker Europe, 210 Bath Road, Slough, Berkshire, SL1 3YD United Kingdom 01-12-2009
GK1630 GK1635 GK1640 GK1630T GK1635T GK1640T
132 GK1630T GK1635T GK1640T
159 GK1630 GK1635 GK1640
18 - 08 - 08
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD
Tel. 03-Fax 03-9727 5940
Tel. +Fax +259 1122
Tel. Fax Helpline 01753 574277
ENGLISH Do not forget to register your product!
www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black&Decker in your country.
500 VA Aficio 1015 Sono 88 EDE56150W HE 1000 Factor KDC-4021 VPC-GH3 Lumina 1993 CE1000 D-NE720 KD-BT22 60P8341 VX-1R 29PT8303 12 Machine Neonumeric Nsdm SLK350 Custom System Slim 300 CS3MX ESF6126 DTH8650 Amplifier Adapter VXZ758R Soundbridge 32PFL7782D Nightmare L226WT-SF Duplicator DEH-P4550 MD491SYS LA46C650l1M ICF-CD7000BLK HL-6050DN Aspire-1690-DDR Mouse YZ250-1998 P1230 KTM MXC DWL-8200AP DVP2320WH SC-VK825D Fujifilm E500 ICN510 Rocktron GAP1 X-L2 PRO CN406aprtn Bruin 8050 TCA DPF-1030 MA560 98130 6050237 Seiko 5M42 Review Nakamichi 481 IC-F15 GZ-MG50 RX640 Photo R360 9500AT Armxxl 129 EMP-83H SA-GX190 UX-16 CT250 LCD1760NX MB-15 MI-fitness CDA-9853R PMD660 2022I Set-TOP 31A-650 Vclick KDL-32ML130 C5501 Rebel 2000 Driverack PA FW870 ESL63010 BH6R1-1 Audiosphere R250S PRO Skipdr Sbcvl1205 HDC-SD9P Landxplorer 2011 SCS145 5S YS-624W SA5285 Romba 580 Omnia PRO FX-82MS 1020 Icrb150 P-d-b-GR EMX 660
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101