RadioCDMP3WMA
Alicante MP36 Sevilla MP36

450 310

Operating instructions

http://www.blaupunkt.com

Controls
1 On/Off button Short press: Mutes the device. Long press: Switches the device off. 2 button to open the flip-release control panel.
8 DISPL button Short press: Briefly displays alternative display contents (e.g. time). Long press: Changes display contents. 9 MENU button Short press: Calls up the menu for basic settings. Long press: Starts the Scan function. : Arrow buttons ; Buttons 1 - 6 < button (Eject) for removing a CD from the device.

ENGLISH

3 Volume control 4 SOURCE button to switch sources between radio, CD, CD changer (if connected) and AUX. 5 AUDIO button to adjust bass, treble, middle, sub-out, balance and fader. Switching X-BASS on/off and adjusting it. Selects an equaliser presetting. 6 BNDTS button Short press: Selects the FM memory banks and the MW and LW wavebands. Long press: Starts the Travelstore function. 7 TRARDS button Short press: Switches traffic information standby on/off. Long press: Switches convenient RDS function on/off.

Contents

Notes and accessories.. 38 Disposal of old unit (EU countries only).. 38 Installation.. 38 Optional equipment (not part of the scope of delivery).. 38 Detachable control panel. 39 Theft protection.. 39 Detaching the control panel. 40 Attaching the control panel.. 40 Switch-off time (OFF TIMER). 40 Switching on/off. 41 Adjusting the volume. 41 Setting the power-on volume. 41 Quickly reducing the volume (Mute). 42 Telephone Audio/Navigation Audio. 42 Switching the confirmation beep on/off. 43 Automatic Sound.. 43 Radio mode.. 44 Adjusting the tuner.. 44 Switching to radio mode. 44 Convenient RDS functions (AF, REG). 44 Selecting the waveband/ memory bank.. 45 Tuning into a station. 45 Setting the sensitivity of station seek tuning. 46 Storing stations.. 46 Storing stations automatically (Travelstore).. 46 Listening to stored stations. 46 Scanning receivable stations (SCAN). 46 Setting the scanning time.. 47 Programme type (PTY). 47 Optimising radio reception.. 48 Configuring the display.. 48
Traffic information.. 49 Switching traffic information priority on/off.. 49 Setting the volume for traffic announcements.. 49 CD mode.. 50 Switching to CD mode. 50 Selecting tracks.. 50 Fast track selection.. 50 Fast searching (audible). 50 Random track play (MIX). 50 Scanning tracks (SCAN). 51 Repeating tracks (REPEAT). 51 Interrupting playback (PAUSE).. 51 Configuring the display.. 51 Traffic announcements in CD mode. 51 Ejecting a CD.. 51 MP3/WMA mode.. 52 Preparing an MP3 CD.. 52 Switching to MP3 mode. 54 Configuring the display.. 54 Configuring the MP3 scrolling texts. 54 Selecting a directory.. 55 Selecting tracks/files.. 55 Fast search. 55 Random track play MIX. 55 Scanning tracks SCAN. 55 Repeated playback of individual tracks or entire directories REPEAT.55 Interrupting playback (PAUSE).. 56
CD-changer mode.. 56 Switching to CD-changer mode. 56 Selecting CDs.. 56 Selecting tracks.. 56 Fast searching (audible). 56 Changing the display.. 57 Repeating individual tracks or whole CDs (REPEAT).. 57 Random track play (MIX). 57 Scanning all tracks on all CDs (SCAN).57 Interrupting playback (PAUSE).. 57 Clock time.. 58 Displaying the time.. 58 Setting the time.. 58 Selecting 12/24-hour clock mode.. 58 Displaying the time continuously when the device is off and the ignition is on.. 58 Briefly displaying time with switched-off device.. 58 Sound... 59 Adjusting the bass. 59 Adjusting the middle.. 59 Adjusting the treble.. 59 Setting the left/right volume distribution (balance).. 60 Adjusting the front/rear volume distribution (fader).. 60 Preamplifier output (Preamp-Out/Sub-Out). 60 Adjusting the sub-out level.. 60 Adjusting the sub-out cutoff frequency.. 60 X-BASS.. 61 Adjusting the X-BASS boost. 61
Equalizer presettings (Presets). 62 Adjusting the display settings. 62 Entering a switch-on message. 62 Adjusting the level display. 62 Adjusting the display brightness. 63 Setting the display illumination colour.. 63 External audio sources.. 64 Switching the AUX input on/off. 64 Adjusting the AUX preamplification. 65 Technical Data.. 65 Amplifier.. 65 Tuner.. 65 CD.. 65 Pre-amp out.. 65 Input sensitivity.. 65 I

Notes and accessories

Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 D-31139 Hildesheim, Germany

Road safety

Road safety has absolute priority. Only operate your car sound system if the road and traffic conditions allow you to do so. Familiarise yourself with the device before setting off on your journey. You should always be able to hear police, fire and ambulance sirens in good time from inside your vehicle. For this reason, listen to your car sound system at a suitable volume level during your journey.

Installation

If you want to install your car sound system yourself, please read the installation and connection instructions that follow these operating instructions.

Optional equipment

(not part of the scope of delivery) Use only accessories approved Blaupunkt. by

Disposal of old unit

(EU countries only) Do not dispose of your old device in the household trash! Use the return and collection systems available to dispose of the old device.
Remote control The steering wheel and/or handheld remote control allows you to access the most important functions of your car sound system safely and conveniently. You cannot switch the device on/off using the remote control. You can find out from your Blaupunkt dealer or on the Internet at www.blaupunkt.com which remote controls can be used with your car sound system.

Control panel

Amplifier You can use all Blaupunkt and Velocity amplifiers. CD changers You can connect the following Blaupunkt CD changers: CDC A 03, CDC A 08 and IDC A 09.

Detachable control panel

Theft protection
The device is equipped with a detachable control panel (flip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel. Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle - not even in a hiding place. Notes: Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Avoid direct skin contact with the control panels electrical contacts. If necessary, please clean the contacts with a lint-free cloth moistened with cleaning alcohol.
Detaching the control panel
Press the button 2. The control panel opens out towards you. Hold the control panel by its right side and then pull the control panel straight out of the bracket.
If the device was still switched on when you detached the control panel, it will automatically switch on with the last setting activated (radio, CD, CD changer or AUX) when the panel is replaced.
Switch-off time (OFF TIMER)
Notes: The device is switched off after a time preset by you. For instructions, please read the section "Switch-off time (OFF TIMER)" in this chapter. All the current settings are saved. Any CD already inserted in the device remains there. After opening the control panel, the device is switched off after an adjustable time. You can set this time from 0 to 30 seconds. Press the MENU button 9. Press the or button : repeatedly until the displays shows "OFF TIMER". Adjust the time with the buttons :. When you have finished making your changes, press the MENU button twice 9. Note: If you set the switch-off time to 0 seconds, the device is switched off immediately after opening the control panel.

Attaching the control panel
Hold the control panel approximately at a right angle to the device. Slide the control panel into the devices guides that are positioned on the left and right at the lower edge of the housing. Push the control panel carefully into the bracket until it clicks into place. Carefully flip up the control panel until it clicks into place.

Switching on/off

Volume
There are various ways of switching the device on/off: Switching on/off using button 1 To switch on the device, press button 1. The device switches on. To switch off the device, press and hold down button 1 for longer than two seconds. The device switches off. Switching on/off using the vehicle ignition The device will switch on/off simultaneously with the ignition if the device is correctly connected to the vehicles ignition as shown in the installation instructions and you did not switch the device off by pressing button 1. Switching the device on/off using the detachable control panel Detach the control panel. The devices switches off after the time set in the "OFF TIMER" menu. Attach the control panel again. The device switches on. The last setting (radio, CD, CD changer or AUX) is reactivated. Note: To protect the vehicle battery, the device will switch off automatically after one hour if the ignition is off.

Adjusting the volume

You can adjust the volume in increments from 0 (off) to 66 (maximum). To increase the volume, turn the volume control 3 clockwise. To decrease the volume, turn the volume control 3 counterclockwise.
Setting the power-on volume
Note: The device features a time-out function (time window). For example, if you press the MENU button 9 and select a menu item, the device switches back after approx. 8 seconds after the last button activation. The settings performed are saved. You can set the power-on volume. Press the MENU button 9. Press the or button : repeatedly until "ON VOLUME" appears on the display. Adjust the power-on volume with the buttons :. To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. If you enable "LAST VOL", the volume which was set the last time you switched off the device is re-enabled.
Note: To protect your hearing, the power-on volume is limited to the value "38". If the volume before switching off was higher and the "LAST VOL" setting was selected, the device switches on again with the value "38". When you have finished making your changes, press the MENU button twice 9.
Telephone Audio/Navigation Audio
If your car sound system is connected with a cell phone or navigation system, the car sound system is muted when you "pick up" the phone or during a voice output of the navigation and the call or the voice output is played back via the car sound speaker system. For this purpose, the cell phone or the navigation system must be connected to the car sound system as described in the installation instructions. Your Blaupunkt dealer can provide you with the information which navigation system can be used with your car sound system. If a traffic announcement is received during a telephone call or a voice output of the navigation, you can listen to the traffic announcement only after the telephone call/ voice output has ended, provided that it is still being broadcast. The traffic announcement is not recorded! You can adjust the volume with which you switch on the telephone calls or the voice output of the navigation. Press the MENU button 9. Press the or button : repeatedly until "TEL VOL" appears on the display. Set the desired volume with the or button :. When you have finished making your changes, press the MENU button twice 9. Note: Using the volume control 3, you can adjust the volume for telephone calls and voice output directly during the playback.

Quickly reducing the volume (Mute)
You can quickly reduce the volume to a preset level (Mute). Briefly press button 1. "MUTE" appears on the display. Cancelling mute To return to your previously set volume level, briefly press button 1 again. Adjusting the mute level You can adjust the mute level. Press the MENU button 9. Press the or button : repeatedly until "MUTE LVL" appears on the display. Adjust the mute level with the buttons :. When you have finished making your changes, press the MENU button twice 9.
Switching the confirmation beep on/off
The system will output a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can switch the beep on or off. Press the MENU button 9. Press the or button : repeatedly until "BEEP ON" or "BEEP OFF" appears on the display. Switch the BEEP ON or OFF with the or button :. When you have finished making your changes, press the MENU button 9.

Automatic Sound

This function automatically adjusts the volume of the car sound system to the vehicle speed. For this purpose, the car sound system must be connected as described in the installation instructions. You can adjust the automatic sound in 6 increments from (0 - 5). Press the MENU button 9. Press the or button : repeatedly until "AUTO SD" appears on the display. Set the automatic sound 0 - 5 with the or button :. When you have finished making your changes, press the MENU button twice 9.
Note: Your optimal setting of 0 - 5 of the speed-dependent sound adjustment depends upon the driving noise development of your vehicle. Determine the perfect value for your vehicle using trial and error.

Radio mode

This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as the tuner receives it.

Tuning into a station

There are various ways of tuning into a station. Automatic station seek tuning Press the or button :. The radio tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the convenient RDS function is deactivated.
Switching the RDS function on/off To switch the RDS functions AF and REGIONAL on or off, press and hold down the TRARDS button 7 for longer than two seconds. The RDS functions are active when RDS lights up in the display.
To change the set frequency in small increments, briefly press the or button :. To change the set frequency quickly, press and hold down the or button : for a longer period of time.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Press the MENU button 9. Press the or button : repeatedly until "SENS" appears on the display. The display shows the currently set sensitivity level. "SENS HI3" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. Set the desired sensitivity level using the or button :. When you have finished making your changes, press the MENU button 9. Note: You can set different sensitivity levels for FM and MW or LW (AM).
Storing stations automatically (Travelstore)
You can automatically store the six stations offering the strongest reception in the region (FM only). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Press and hold down the BNDTS button 6 for longer than two seconds. The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband. Press one of the station buttons 1 - 6 ;. The stored station is played if it can be received.

Storing stations

Storing stations manually Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW). Tune into the desired station. Press and hold down one of the station buttons 1 - 6 for longer than two seconds to assign the station to that button.
Scanning receivable stations (SCAN)
You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN Press and hold down the MENU button 9 for longer than two seconds. Scanning begins.
"SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling the SCAN and continuing to listen to a station Press the MENU button 9. Scanning stops and the radio continues playing the station that it tuned into last.
PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Notes: If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CD-changer mode to the station whose programme type matches the one you selected. If you do not want this PTY EON switching, disable it in the menu with "PTY OFF". First, press one of the SOURCE 4 or BNDTS buttons 6. Switching PTY on/off Press the MENU button 9. Press the or : repeatedly until "PTY" appears on the display with the current setting. Press the or button : to switch PTY ON or OFF. Press the MENU button 9.
Setting the scanning time
Press the MENU button 9. Press the or button : repeatedly until "SCAN TIME" appears on the display. Set the desired scan time using the or button :. When you have finished making your changes, press the MENU button twice 9. Note: The defined scanning time is also applied by the system to scanning carried out in CD and CD changer mode.

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT SERVICE POP ROCK KNOWLEDGE KIDS You can use the PTY function to select stations of a particular programme type.

Selecting the PTY language You can select the language for the display of the programme types. Options include DEUTSCH, ENGLISH and FRANAIS. Press the MENU button 9. Press the or button : repeatedly until "PTY LANG" appears on the display. Set the desired language with the or button :. When you have finished making your changes, press the MENU button twice 9. Selecting a programme type and starting seek tuning Press the or button :. The current programme type appears on the display. If you want to select another programme type, you can do so by pressing the or button : while this display is visible. Or Press one of the buttons 1 - 6 ; to select a programme type that is assigned to one of these buttons. The selected programme type appears briefly on the display. Press the or button : to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type.
Assigning a programme type to a station button Select a programme type using the or button :. Press and hold the desired station button 1 - 6 ; for longer than two seconds. The programme type is stored on the selected button 1 - 6 ;.
Optimising radio reception
Treble reduction feature during interference (High Cut) The High Cut function results in an improved reception in case of weak radio reception (FM only). If reception interferences are present, the interference level is automatically reduced. Switching High Cut on/off Press the MENU button 9. Press the or button : repeatedly until "HICUT" appears on the display. Press the or button : to switch High Cut on (1) or off (0). "HICUT 0" means no automatic reduction of the interference level, "HICUT 1" means automatic reduction of the interference level. Press the MENU button 9.

Configuring the display

In radio mode, you have the option of displaying the waveband with memory bank and the time or station name or frequency of the current station. To switch the display, press and hold down the DISPL button 8 for longer than two seconds.

Traffic information

Your device is equipped with an RDS-EON receiver. EON (Enhanced Other Network) ensures that whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme that you were listening to before.

Setting the volume for traffic announcements
Press the MENU button 9. Press the or button : repeatedly until "TA VOLUME" appears on the display. Set the volume using the or button :. To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. When you have finished making your changes, press the MENU button twice 9. Notes: Using the volume control 3, you can also adjust the volume during a traffic announcement for the duration of that announcement. You can adjust the sound settings and volume distribution settings for traffic announcements. For further information, please read the "Sound" chapter.
Switching traffic information priority on/off
Press the TRARDS button 7. The priority for traffic announcements is activated if the display shows the traffic jam symbol. Notes: You will hear a warning beep if you leave the reception area of a traffic information station that you are currently listening to. if you leave the reception area of a traffic information station that the system is tuned into while listening to a CD or a CD in the changer, and the subsequent automatic search cannot find a new traffic information station. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information.

CD mode

You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. To avoid problems when playing self-burned CDs, you should not burn CDs at speeds greater than 16-speed. to the CD drive! CD singles with a diameter of 8 cm and noncircular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure proper functioning, use only CDs with the Compact-Disc logo. Copy-protected CDs can cause playback problems. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Besides being able to play audio CDs on this device, you can also play CDs containing MP3/WMA music files. For further information, please read the chapter entitled "MP3/ WMA mode".

Risk of severe damage

Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing. Note: If the vehicle ignition was switched off prior to inserting the CD, you must switch the device on first with the button 1 to start the playback. If a CD is already inserted in the drive, press the SOURCE button 4 repeatedly until "CD" appears on the display. Playback begins from the point at which it was last interrupted.

Ejecting a CD

Press the button 2. The control panel opens out towards you. Press the eject button < next to the CD tray. The CD is ejected. Remove the CD and close the control panel. 51

CD mode

MP3/WMA mode
Notes: If a CD is ejected, the drive will automatically draw it back in again after 10 seconds. You can also eject CDs whilst the device is switched off or whilst another audio source is activated.
You can also use this car sound system to play CD-Rs and CD-RWs that contain MP3 music files. You can also play WMA files. The operation for playing MP3 and WMA files is identical. Notes: WMA files with Digital Rights Management (DRM) from online music shops cannot be played with this device. WMA files can only be played back safely if they were created with Windows Media-Player version 8.

Preparing an MP3 CD

The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the devices ability to play certain CDs. If problems occur with your own burned CDs, you should try another brand of CD blank or choose another colour of CD blank. The format of the CD must be ISO 9660 Level 1/Level 2 or Joliet. Other formats cannot be played reliably. You can create a maximum of 252 directories on a CD. You can use this device to access directories individually. Regardless of the number of directories on the CD, the device can handle up to 999 MP3 files on a single CD, with a maximum of 255 files in one directory.
This device supports as many subdirectories as your burner software can create despite the fact that the maximum directory depth defined by the ISO 9660 standard is only 8.
D01 D02 D03 T001 T002 T003 T004 T005 T001 T002 T003 T004 T005 T006
A Directories B Title Files You can name each directory using a PC. The device is capable of displaying the directory name. Name the directories and tracks/files using your CD burner software. The softwares instruction manual will provide details on how to do this. Note: When naming directories and tracks/ files you should avoid using accents and special characters.
A D04 T001 T002 T003 T004 T005 T006 T007 T008 T009 T010 T011
If you like your files to be in the correct order, you should use burner software that places files in alphanumerical order. If your software does not provide this feature you also have the option of sorting the files manually. For this purpose, you must enter a number in front of each file name, e.g. "001", "002", etc. The leading zeros must also be entered. MP3 tracks can contain additional information such as the artist, album and track names (ID3 tags). This device can display ID3 tags (version 1). When creating (encoding) MP3 files from audio files, you should use bit rates up to a maximum of 256 Kbit/sec. This device can only play MP3 files that have the ".MP3" file extension. Notes: To ensure uninterrupted playback, do not try changing the file extension to ".MP3" of any files other than MP3 files and then attempt to play them! The device will ignore these invalid files during playback. Do not use "mixed" CDs containing both non-MP3 data and MP3 tracks (the device only reads MP3 files during MP3 playback). Do not use mix-mode CDs containing both CD-audio tracks and MP3 tracks. If you try playing a mix-mode CD, the device will only play the CDaudio tracks.

Fast search

To fast search backwards or forwards, press and hold down the or button : until fast searching backwards / forwards begins.

Random track play MIX

To play the tracks in the current directory in random order, briefly press the 5 MIX button ;. "MIX DIR" appears on the display and the MIX symbol is displayed. To play the tracks contained in all the directories on the inserted MP3-CD in random order, press the 5 MIX button ; for longer than two seconds. "MIX CD" appears on the display and the MIX symbol is displayed. Cancelling MIX To cancel MIX, briefly press the 5 MIX button ;. "MIX OFF" appears on the display and the MIX symbol disappears.
Repeated playback of individual tracks or entire directories REPEAT
To play the current track repeatedly, briefly press the 4 RPT button ;. "RPT TRCK" and RPT appear briefly on the display. To repeat the whole directory, press the 4 RPT button ; for longer than two seconds. "RPT DIR" appears briefly on the display.

Selecting tracks/files

CD-changer mode
Cancelling repeat To stop the current track or current directory from being repeated, briefly press the 4 RPT button ;. "RPT OFF" appears briefly on the display and RPT disappears.
Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.
Switching to CD-changer mode
Press the SOURCE button 4 repeatedly until "CHANGER" appears on the display. The device starts playing the first CD that the CD changer detects.

Selecting CDs

To move up or down to another CD, press the or button : once or several times. Note: The device will ignore empty CD slots in the changer and slots containing invalid CDs.
To move up or down to another track on the current CD, press the or button : once or several times.

Changing the display

Five options are available for the display in CD changer mode: Track number and playing time Track number and time CD number and track number CD number and time CD number and playing time To switch between the display options, press and hold down the DISPL button 8 for longer than two seconds.
Cancelling MIX briefly press the 5 MIX button ;. "MIX OFF" appears and MIX on the display disappears.
Repeating individual tracks or whole CDs (REPEAT)
To repeat the current track, briefly press the 4 RPT button ;. "RPT TRCK" appears briefly and RPT lights up on the display. To repeat the current CD, press and hold down the 4 RPT button ; for longer than two seconds. "RPT DISC" appears briefly and RPT lights up on the display. Cancelling repeat To stop the current track or current CD from being repeated, briefly press the 4 RPT button ;. "RPT OFF" appears and RPT disappears on the display.

Scanning all tracks on all CDs (SCAN)
To scan (briefly play) all the tracks on all the inserted CDs in ascending order, press the MENU button 9 for longer than two seconds. "TRK SCAN" appears on the display and the number of the current track flashes. Stopping Scan To stop scanning, briefly press the MENU button 9. The currently played track will then continue to be played normally. Note: You can set the scanning time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter.
Press the 3 button ;. "PAUSE" appears on the display. Cancelling pause During the pause, press the button 3 ;. Playback is continued. 57
To play the tracks on the current CD in random order, briefly press the 5 MIX button ;. "MIX CD" appears briefly and MIX lights up on the display.
To play the tracks on all inserted CDs in random order, press and hold down the 5 MIX button ; for longer than two seconds. "MIX ALL" appears briefly and MIX lights up on the display.

Clock time

Displaying the time
To briefly display the time, briefly press the DISPL button 8. The time appears on the display for several seconds.
Press the or button : to switch between modes. When you have finished making your changes, press the MENU button 9.

Setting the time

To set the time, press the MENU button 9. Press the or button : repeatedly until "CLOCK SET" appears on the display. Press the button :. The time appears on the display. The hours flash and can be adjusted. Set the hours with the or button :. Once the hours are set, press the button :. The minutes flash. Set the minutes with the or button :. When you have finished making your changes, press the MENU button twice 9.
Displaying the time continuously when the device is off and the ignition is on
To display the time when the device is off and the vehicle ignition is on, press the MENU button 9. Press the or button : repeatedly until "CLOCK OFF" or "CLOCK ON" appears on the display. Press the or button : to switch the display between ON and OFF. When you have finished making your changes, press the MENU button 9.

Preamplifier output (Preamp-Out/Sub-Out)
You can use the preamplifier outputs (Preamp-Out) of the car sound system to connect external amplifiers. In addition, you can connect an amplifier for operating a subwoofer to the integrated dynamic lowpass filter of the device (level and cutoff frequency can be adjusted). For this purpose, the amplifiers must be connected as described in the installation instructions.
Adjusting the sub-out level
The sub-out level can be adjusted in 8 increments (0 to +7). Press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "SUBOUT" appears on the display. Press the or button : to adjust a value between 0 and +7. When you have finished making your changes, press the AUDIO button 5 twice.
Adjusting the front/rear volume distribution (fader)
To adjust the front/rear volume distribution (fader), press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "Fader" appears on the display with the current setting. Press the or button : to adjust the volume distribution front/rear. Press the AUDIO button 5 to exit the menu.
Adjusting the sub-out cutoff frequency
You can select 1 of 4 settings: 0Hz, 80Hz, 120Hz and 160Hz. Press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "SUBOUT" appears on the display.

Preamplifier output

X-Bass
Adjusting the X-BASS boost
Press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "XBASS" appears on the display. Press the or button : repeatedly until the desired setting appears on the display. When you have finished making your changes, press the AUDIO button 5 twice.
Press the or button : once. Press the or button : repeatedly until the desired frequency appears on the display. When you have finished making your changes, press the AUDIO button 5 twice.

X-BASS

X-Bass allows you to increase the bass at low volume. The selected X-Bass setting is effective for all audio sources (radio, CD, CD changer or AUX). The X-BASS increase can be set in increments of 1 to 3. "XBASS OFF" means that the X-BASS function is switched off.

Equalizer

Display
Equalizer presettings (Presets)
This device features an equaliser in which the settings for the music genres "ROCK", "POP" and "CLASSIC" are already programmed. To select an equalizer setting, press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears on the display. Press the or button : to select one of the settings or select "EQ OFF" to switch off the equalizer. The selected setting is permanently shown on the display. When you have finished making your changes, press the AUDIO button 5.

Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) Malaysia (Asia Pacific) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) (USA) (BR)
Phone: 0180-5000225 01-0 02-360 09-01-01-01-700 02-1010 66-08-7501850 01-8471644 02-803 0800-118922 0212-71 800-950-7045446
Fax: 05121-01-391 02-44-09-01-01-01-706 02-1040 66-4078 08-7501810 01-8471650 02-809 022-8771260 0212-40 708-6817188 +55-2773 +604-6413 640
WWW: http://www.blaupunkt.com

(MAL) +604-6382 474

Gertepass

Name: Typ: Serien-Nr:

7 646...

BP...

Blaupunkt GmbH, Robert-Bosch-Strae 200, D-31139 Hildesheim
02/06 - CM-AS/SCS1 (dt, gb, fr, it, nl, sw, es, pt, dk, pl, cz, sk)

8622404851