(TO X2000) X2010

REEL_R MMT REEL_F CPS-L MMT + CPS_OUT U8 U142

Logik-Platte Logic board

PL 0312 A05
COBURG RCR 168 (D) COLORADO RCR 168 (E) LAS VEGAS DJ (E) PORTOFINO RCR 168 (E) RAVENNA RCM 168 (E) ST. TROPEZ RCM 168 (E) FIAT MULTIPLA (E)
GND LINE_OUT_LF BATTERY LINE_OUT_LR IGNITION LINE_OUT_RF LR LR LR + LF LF +
SMT-REVERSE CPS_ON / OFF METAL
SMT_R CPS_CTRL METAL SMT_F GND

C1163 + R1241 R1261

C1144 C1164 C1262 C1241 C1261 + + + + + + + + C1242

C1263 + + C1252

LINE_OUT_RR RF +

MODE SWITCH SELECT

CPS-ON/OFF CPS-HIGH

DOLBY B

NONE DOLBY B OPTION

C1250 C1243 + C1251

N.C. RR + LF + N.C. LF AUTO_ANT. SW_14V BUS_DATA RF BUS_CLK RF + TEL_MUTE LINE_OUT_LR LINE_OUT_RR AF_GND LINE_OUT_LF LINE_OUT_RF SW_14V N.C. N.C. N.C. SW_14V REM_CONT. (IRC08) RC_GND BUS_CLK BUS_DATA N.C. SW_14V BUS_GND AF_GND LINE_IN_L LINE_IN_R

SMT-NORMAL

TAPE-LEFT-OUTPUT TAPE-RIGHT-OUTPUT DOLBY_ON / OFF REVERSE / NORMAL

NF_L NF_R DOLBY_ON F/R

CPS-R+L

HALL NORMAL

C1351 + C1352 C1143 + C14 10

HALL PLATTE HALL BOARD

HALL REVERSE

(TAPE HEAD)

1= 2= 3= 4= 5= GND NORM_L_CH NORM_R_CH REV_R_CH REV_L_CH 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 =
MODE1 MODE3 COLLECTOR MODE2 ANODE REEL_R MMT REEL_F MMT+ CPS_OUT U= 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 21 = U142 SMT_R CPS_CTRL METAL SMT_F GND NF_L NF_R DOLBY_ON F/R 1= 2= 3= 4= 5= 6= 7= 8= 9=

(HALL BOARD)

N.C. REEL_NORM ANODE REEL_REV COLLECTOR MODE2 MODE1 MODE3 GND 1= 2= 3= 4=

(MOTOR)

MMT+ MMT SMT+ SMT
RR + REM_CONT. RR AF_GND LINE_IN_L LINE_IN_R
GND MODE 3 MODE 1 MODE 2 COLLECTOR REEL _REVERSE ANODE REEL_NORMAL N.C.

HALL SENSOR

RIGHT CHANNEL DOLBY_ON / OFF (DOLBY=H)
KASSETTEN-LOGIK-PLATTE (TN708) CASSETTE LOGIC BOARD (TN708)
KASSETTEN-LOGIK-PLATTE CASSETTE LOGIC BOARD

PL 0308 A5

AM / FM-TUNER

AM / FM Tuner

PL 0308 A05
Z660 L660 + C661 R179 L45 L3 Z151 C668 L650 L651 L152 Z152 L51 + C22 L2 ANT. C662 Z150 L4 L636 L635
AM-OSZILLATOR + MISCHER + ZF-VERSTRKER + DEMODULATOR AM-OSCILLATOR + MIXER + IF-AMPLIFIER + DEMODULATOR
MW-EINGANGSKREIS MW-INPUT-CIRCUIT

8,3V 8,3V

U82 U_AM

8,3V 0,2V

FS_AM AM_OSC
LW-EINGANGSKREIS LW-INPUT-CIRCUIT

MW=HIGH

AM-ZF-KREIS AM-IF-CIRCUIT
Boston RCR 128 Coburg RCR 168 Colorado RCR 310 Dresden RCR 128 Freiburg RCM 148 Louisiana RCM 510 Portofino RCR 168 Ravenna RCM 168 Rimini RCM 510 Siena RCM 148 St. Tropez RCM 168 Fiat Multipla Kingston DJ St. Louis DJ 912 319

Schaltbild Circuit diagram
AM-VERSTRKER AM-AMPLIFIER
1= 2= 3= 4= 5= 6= U82 U_AM FS_AM AM_OSC AM_NF GND 1= 2= 3= 4= 5= U_FM FM_OSC GND M/L U81

8,3V MW=LOW

AM-OSZILLATOR-KREIS AM-OSCILLATOR-CIRCUIT
6= 7= 8= 9= 10 = MULTIPATH FS_FM SLF SL_STOP MPX

1 = ANT 2 = GND

AM_NF GND

AM-AGC

B E C BC848 V631 G D S BFR543 V620

MULTIPATH

R7 C25
FM-HF-VERSTRKER + OSZILLATOR + MISCHER FM-RF-AMPLIFIER + OSCILLATOR + MIXER FM-ZF-VERSTRKER + DEMODULATOR FM-IF-AMPLIFIER + DEMODULATOR

ZF / IF

PL 0308 A05 Chip

R621 V620

R622 R631 C619

R20 C4 C5 V630 C628 R629

C11 C175
Anschluplatte Connector board
FM-ZF-KREIS FM-IF-CIRCUIT

V188 R663 R662 C664

MW=LOW

SL=HIGH

PL 0311 A02
FM-AGC 8,3V 8,3V 8,3V 8,3V 1,2V 1,2V 4,2V 0,6V
SUCHLAUF-EMPFINDLICHKEIT SEARCH SENSITIVITY

X2020 (TO X4)

MPX SL_STOP

ANT GND

BC848 V636 V650 V653 V655

BC858 V3

BF545 V600

BF999 V2

FM-ZWISCHENKREIS FM-INTERMEDIATE-CIRCUIT
FS_FM MULTIPATH 8,3V 1,4V 4,3V 3V 4,1V 4,2V 2,1V 4V U81 8,3V M/L GND FM_OSC U_FM

V636 L1

C180 C667

C32 C33 C35

PHASENSCHIEBER PHASE SHIFTER

V635 C16 R653

8 SX10

C40 C150

C174 R172

16 R21

11 C657

20 R18

R659 C659 C654

R156 C155 C38 R150

V637 R656 C690 V655
FM-OSZILLATOR-KREIS FM-OSCILLATOR-CIRCUIT
ZF-BEGRENZUNG IF-LIMITING

C3 V10 L7

V601 R605 C604 R600

C601 R603

FM-EINGANGSKREIS FM-INPUT-CIRCUIT
Blaupunkt-Werke GmbH, Hildesheim

MAUS-BUS

PL 0311 A2
ANSCHLUSSPLATTE CONNECTOR BOARD

AUTORADIO

X2010 (TO X2000)
1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 21 = 22 = 23 = 24 = 25 = 26 = GND LINE_OUT_LF BATTERY LINE_OUT_LR IGNITION LINE_OUT_RF LR LINE_OUT_RR LR + N.C. LF + N.C. LF AUTO_ANT. SW_14V BUS_DATA RF BUS_CLK RF + TEL_MUTE RR + REM_CONT. RR AF_GND LINE_IN_L LINE_IN_R

2 X2030 X2040

X2050 25
nderungen vorbehalten! Nachdruck - auch auszugsweise nur mit Quellenangabe gestattet.

Modification reserved! Reproduction - also by extract only permitted with indication of sources used.

PL 0312 A5

TONBAND-VORVERSTRKER TAPE PREAMPLIFIER
MOTOR-TREIBER MOTOR-DRIVER
Modification rserves! Reproduction - aussi en abrgpermise seulement avec indication des sources utilises.
Gedruckt in Deutschland Printed in Germany by Oeding Druck 38100 Braunschweig
Modificacines reservadas! Reproduccin - tambin en parte solamente permitida con indicacin de las fuentes utilizadas.
BATTERY N.C. TEL_MUTE N.C.

Las Vegas DJ 929 319

BN-WG 06/98 SB
MULTIPATH SL_STOP FM_OSC AM_OSC U_AM U_FM FS_FM NF_AM FS_AM GND M/L GND MPX ANT U81

VECTOR_A1/B1/C1

8,3V 8,5V 14,2V

DECODER/ASU

NF-SCHALTER AF-CONTROLLER
NF-VORVERSTRKER AF-PREAMPLIFIER
NF-VERSTRKER AF-AMPLIFIER

PL 0304 A7

PLL-LOOP-FILTER

VECTOR_A3

6,4V 14,4V

VECTOR_F2

4,2V 4,9V 7,1V 8,5V 4,9V

MUTE-RR

VECTOR_F1

7,1V 3,3K / 10K

14,4V 14,4V 0,6V 0,6V
7,1V 4,2V 1N / 1,5N 1N / 1,5N 4,2V 14,2V 4,2V 4,2V

39K / 47K

MUTE-RF

4,2V R

7,1V 4,2V 0,2V 3,9V 4,2V 4,9V 4,2V 4,2V 4,2V 4,2V MPX 4,2V 4,2V 7,1V 4,2V MW = LOW FM = LOW 4,9V 4,9V 2,1V 4,2V

VECTOR_H3/4

VECTOR_F3
4,2V 8,4V 1,9V 4,2V 8,4V 0,3V 7,5V 1,9V 4,2V 4,2V 4,2V

VECTOR_A2

27K / 180K 4,2V 4,9V 8,5V L 4,2V 4,2V 4,2V

MUTE-LF

3,3K / 10K

NO RDS OPTION

180K / 270K 4,2V 4,2V

AM / FM INTERFACE

ASU_IN

FOR RDS ONLY

MUTE-LR
3,3K / 10K ON = 2V OFF > 3V (D860 / 5 + D800 / 49) (D860 / 6 + D800 / 50)
8,5V (D2400 / 37 + D800 / 64 + D300 / 16) (D2400 / 16 + V346 / B + D700 / 6)
(D2400 / 16 + X2 / 8 + D700 / 6)
(D2400 / 16 + X2 / 8 + V346 / B)

(D2400 / 44 + D800 / 48)

(D2400 / 38 + D800 / 64)

(D2400 / 11 + D800 / 43)

(D2400 / 39 + V346 / C)

(D2401 / 5 + D300 / 20)

(D2400 / 7 + D800 / 44)

(D2400 / 20)

(D800 / 56)

(D800 / 51)

(D800 / 62)

(X2 / 4)

8,3V U_AM U_FM
8,3V =H (D800 / 33) U_AM U_FM

(X2000 / 16)

(D800 / 39) 4,9V 14,4V (X2000 / 18)

(D300 / 7)

(D700 / 9)

(D800 / 5)

(D860 / 6 + D1500 / 28)

(D860 / 5 + D1500 / 27)

(D2400 / 44 + X2 / 9)

(D800 / 48 + X2 / 9)

(D1500 / 10)

VECTOR B2/3

COLLECTOR DOLBY_ON CPS_CTRL CPS_OUT REEL_R REEL_F MODE3 MODE2 ANODE SMT_R SMT_F METAL

VECTOR_C4

F/R ILLUMINATION

4,9V 8,5V

X1301 (TO X1340)
TB-VORVERSTRKER TAPE-PREAMPLIFIER

SS3301 S3316 S3311 S3313

FIAT MULTIPLA (E)

SRC DSC

S3312 S3318

S3304 S3321

S3314 S3315

CLK / DIS

BA / TS PTY
S3305 S3306 S3307 S3308 S3309 S3310

PL 0310 A03 Chip

SDA_FR SCL_FR GND

SENSE REMOTE

GND VLED
N.C. U10 N.C. LAMP_GND 4,7V U53
SCHALTERPLATTE KEY BOARD PL 0310 A3

Radio / Cassette

Dresden RCR 128 Boston RCR 128

Operating instructions

The display consists of three fields and changes according to the operating mode and function.
Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e.g. P1) Cassette mode CAS - cassette inserted Audio Numeric and graphic representation of the volume and audio settings. DSC Permanent display for DSC programming. Graphic representation of the adjusted volume level.
Display field 2: Radio mode Radio frequency or station name PTY programme type
Display field 3: Displays active functions. - Stereo - Cassette inserted - Loudness
LD Cassette mode TAPE1/TAPE2 - side of tape being played. Displays active function. DSC Serves as display and entry field during DSC programming Clock display Miscellaneous Indicates new source (e.g. when changing from radio to cassette)
Radio mode AF PTY TA TP lo - RDS alternative frequency - RDS programme type - Priority for traffic information - Traffic programme station - Seek tuning sensitivity
Dresden,Boston RCR128 gb 19 02.05.2002, 11:03 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

DEUTSCH

Display

Contents
Display.. 19 Quick reference.. 21 Important notes.. 23 What you need to know. 23 Traffic safety... 23 Installation.. 23 Warning note.. 23 Clock.. 24 Setting the clock.. 24 Release panel.. 24 Theft protection.. 24 Fixing the release panel.. 25 Selecting the audio mode. 25 Radio operation with RDS (Radio Data System).. 25 AF - Alternative frequency.. 25 REG - regional programme. 25 Selecting a waveband. 26 Station tuning.. 26 Automatic seek tuning /. 26 Manual tuning with << >>. 26 Scrolling through the broadcasting networks (FM only). 26 Switching between the memory banks (FM).. 26 Storing stations.. 26 Automatically storing the strongest stations with Travelstore.. 27 Recalling stored stations.. 27 Scanning stations with Radio Scan.. 27 Selecting the automatic tuning sensitivity... 27 PTY - Programme Type.. 27 Programme types.. 28 Switching PTY ON/OFF. 28 Checking the programme type of the station... 28 Displaying the selected programme type.. 28 Selecting a programme type. 28 Storing programme types. 29 Scanning stations with PTY SCAN. 29 PTY priority.. 29 Traffic programme station reception with RDS-EON.. 30 Traffic announcement priority on/off. 30 Warning beep.. 30 Switching the warning beep off. 30 Automatic seek tuning start (Cassette operation).. 30 Adjusting the volume for traffic announcements and the warning beep.. 31 Cassette deck operation.. 31 Cassette playback.. 31 Cassette eject.. 31 Fast winding.. 31 Reversing the tape. 31 Traffic information during cassette playback.. 31 DSC programming.. 32 Overview of the DSC factory settings.. 33 Appendix... 33 Specifications.. 33
Dresden,Boston RCR128 gb 20 02.05.2002, 11:03 Uhr
Eject Press this button to eject the cassette.
Dresden,Boston RCR128 gb 21 02.05.2002, 11:03 Uhr
Switching on/off via the ignition: If the set has been connected correspondingly, it can also be turned on and off with the vehicle ignition. Press the ON button to keep on operating the set when the ignition is switched off. The set will switch on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.
7 + 8 Reversing the tape (PROG) Press both buttons simultaneously.
: SRC/SC (SRC = audio source, SC = scan) Press button briefly to select the operating mode (tuner, cassette). The active mode appears in the display.
Fast winding To fast forward the tape for direction TAPE 1. To fast rewind the tape for direction TAPE 2.
Fast winding To fast rewind the tape for direction TAPE 1. To fast forward the tape for direction TAPE 2.
Extra function of rocker switch: For additional settings use AUD F DSC-MODE E PTY < Requirement: The respective function is activated.
2 ON - Power up/down Press this button to turn the equipment on. It will play at the preset volume. If you press this button briefly during radio reception, the volume will turn down instantly (MUTE). This function is cancelled by pressing the ON button again. You can programme the mute volume (refer to DSC programming). Press the button for about 2 seconds to turn the unit off.
5 Cassette slot Insert the tape into the slot with the open side showing to the right. The tape will be played in the direction previously selected. 6 Display Displays all settings, operating modes and functions.

Radio mode

Seek tuning Up Down <</>> Up/down in short intervals (on FM only if AF is off) For FM only: <</>> Scrolling through the broadcasting networks, if AF is on. Example: NDR 1, 2, 4, N-Joy, FFN. /
1 REL To release the detachable panel (theft protection). Press this knob and remove the release panel.
3 Volume knob Turn the knob to set the volume. 4

9 Rocker switch

Quick reference
Press SRC/SC longer to select the SCAN function. Radio mode Press SRC/SC longer. The radio will scan all receivable FM, MW and LW stations (Dresden RCR 128 without MW, LW). SCAN and the station name (if applicable) appear on the display one after another (only for FM). PTY Scan PTY Scan can be started if PTY is on (PTY will be displayed). The radio will scan all stations broadcasting the selected programme type. ; AFTA Alternative Frequency in RDS mode: TA (Traffic Announcement = priority for traffic programs) If AF is displayed, the radio will automatically search for a radio frequency offering the same programme in a better quality (using RDS). TA on/off: Press AFTA briefly: TA will be displayed, priority for traffic programs activated. Press AFTA briefly: TA off. 22
Dresden,Boston RCR128 gb 22
TP will be displayed when a traffic programme is played. AF on/off: Press AFTA longer: a beep will be emitted; AF appears. Press AFTA longer: a beep will be emitted; AF disappears. < PTY (Programme Type) You can select among various programme types. Using the rocker switch << >> it is possible to recall all PTY programme types, if PTY is activated (PTY lights up in the display). = BA/TS Switches between the wavebands/ memory banks FM1, FM2, FMT (Travelstore), MW and LW (Dresden RCR 128 without MW, LW). Extra function: Travelstore To store the six most powerful radio stations in the Travelstore bank: Press BA/TS until a beep sounds and T-STORE appears. >.C - Preset buttons 1 to 6 Radio mode You can store six stations in each memory bank (1, 2, and T).
On MW and LW you can store six stations each (except for Dresden RCR 128). Store station - hold down a preset button in radio mode until a beep is emitted. Recall station - select a waveband and also the memory bank on FM; press the relevant preset button briefly. The selected preset button will briefly appear in display field 1 (e.g. P1). D DIS - clock display Radio mode Press this button briefly and the time will be displayed for a while. Cassette mode Press this button to switch the display between the cassette direction and clock indication. E DSC Direct Software Control Adjusts programmable basic settings. Refer to DSC programming. F AUD Default settings for treble and bass You can store different settings for the FM, MW, LW and cassette mode (Dresden RCR 128 without MW, LW).

02.05.2002, 11:03 Uhr

Treble:

Treble + Treble

Traffic safety
As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the radio. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, so that you can react accordingly. Consequently, you should always select a moderate volume for playing your car radio while you are driving.

Bass Bass +

The selected values will appear in the display. The last setting is stored automatically. Switching AUD off Press button briefly. If you do not change the tone within 8 sec., the AUD mode will quit automatically. Extra function: LD Loudness boosts the bass frequency at low volume. Press AUD longer than 2 seconds to change the Loudness setting. LD will appear.
Danger of damaging the automatic power antenna in a car wash Before you drive into a car wash switch the radio off by pressing the ON button. The power antenna will retract, if it doesnt, press ON again. Do not drive into the car wash unless the power antenna has retracted!
Dresden,Boston RCR128 gb 23 02.05.2002, 11:03 Uhr
Fader front Fader rear Balance left Balance right

Warning note

Press AUD twice and set the fader using the rocker switch.
Setting the tone: Select the audio mode. Press AUD once and set the tone using the rocker switch.

What you need to know

Before using your new car radio, please read through the following information carefully.

Installation

If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read the enclosed instructions on installation and connection carefully. In order to ensure that the set operates properly the positive power supply line must be connected via the ignition and the permanent +12 V lead. Do not ground the loudspeaker outputs!

Important notes

This car radio is equipped with a built-in clock. Display priority: To switch the display priority, press the button until you hear a beep. Press as many times until the desired display mode is active (not during radio reception). Radio mode Press the clock. button briefly to display the

Release panel

Theft protection
This unit is equipped with a detachable control panel. A car radio without control panel is worthless for thieves. Protect your car radio and detach the control panel when you leave your car. It is very easy to attach and detach the release panel thanks to its specific design. Note: Do not pull the release panel straight out from the chassis, but detach it as illustrated below. Be sure not to drop the panel. Do not expose the release panel to direct sunlight or other heat sources. Do not leave it in a humid place. Detaching the release panel Press the REL button to release the control panel. Then pull it off gently as illustrated. If the set was still in operation, it will turn off now. All current settings remain stored. If a cassette or CD is inserted, it will be kept in the set. The radio will turn on automatically when you attach the release panel again. Attaching the release panel Slide the panel (B) from the left to the guide of the chassis (A). Gently push the left side of the panel against the front of the chassis until it snaps into place.

Cassette mode Press this button to switch the display between the cassette direction and clock indication.

Setting the clock

Press DSC briefly. Press / to selection the CLOCKSET function. Press << >> to set the hours or minutes. The adjustable option will flash in the display. Press / to adjust the flashing value. After you have set the clock, press DSC briefly to store the new setting.
Dresden,Boston RCR128 gb 24 02.05.2002, 11:04 Uhr

Fixing the release panel

If you wish to fix the release panel permanently to the chassis, screw down the enclosed bolt at the left hand side of the chassis into the hole (C), see Fig.
The Radio Data System will enhance your enjoyment when you listen to FM radio stations. More and more radio stations broadcast RDS information along with their regular programming. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages:

REG - regional programme

Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern German states of Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to a particular regional programme and wish to continue doing so, select REG ON in the DSC mode. If you leave the service area of the regional programme you are tuned into, or if you would like to take advantage of full RDS service, switch to REG OFF in the DSC mode. 25

Selecting the audio mode

Use the SRC/SC (source) button to select between radio and cassette mode. To select the operating mode: Press SRC/SC.
AF - Alternative frequency
The AF (Alternative Frequency) function makes sure that the radio always tunes into the strongest frequency of the currently selected programme automatically. This function is activated when AF appears in the display. In order to switch this function on or off, press the AFTA button until a beep is emitted. While searching for the strongest reception signal, the radio may switch to mute briefly.

Dresden,Boston RCR128 gb

02.05.2002, 11:04 Uhr
If the reception quality of the selected programme deteriorates beyond a certain point: Tune into another station.
If SEARCH appears in the display when the radio is switched on or one of the stored frequencies recalled, the unit is already automatically searching for an alternative frequency. SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has run through completely.

Radio operation with RDS (Radio Data System)

Selecting a waveband

With this car radio you can select between the following wavebands: FM 87,5 - 108 MHz MW 531 - 1602 kHz LW153 - 279 kHz (Dresden RCR 128 without MW, LW). Select the desired waveband by pressing the BA/TS button.
Manual tuning with << >> You can also tune into a station manually. Requirement: AF and PTY must be switched off (i.e. the symbols do not light up in the display). If necessary, deactivate these functions: Press AFTA or PTY. Manual tuning: Press << >>; the frequency will change in short intervals in the downwards or upwards direction. If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.
To do this, you can start the Travelstore seek operation: Press BA/TS for 2 seconds; the system will start to run through the frequency band. If AF is not lit up, Hold AFTA down. A beep sounds and AF appears. This fulfils the requirements for selecting stations with << >>.

Station tuning

Automatic seek tuning / Press / ; the car radio will automatically search for the next station. If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the upwards or downwards direction.
Switching between the memory banks (FM)
You can switch between the memory banks 1, 2 and T in order to store stations and recall them later. The currently selected memory bank appears in the display. Press the BA/TS button as many times as necessary until the desired memory bank lights up in the display.
Scrolling through the broadcasting networks (FM only)
You can use the << >> buttons to tune into stations in your reception area. If it is possible to receive several programmes in the same broadcasting network, you can scroll through them in the forwards direction by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY,. For this to work properly you must have already tuned into the stations at least once and AF must be active (lights up in the display).

Storing stations

On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T). On MW/LW, you can also store six stations each (Dresden RCR 128 without MW, LW).

Automatic seek tuning Up Down << / >> Up/down in short intervals (on FM only if AF is switched off)
Dresden,Boston RCR128 gb 26 02.05.2002, 11:04 Uhr
Select the appropriate waveband by pressing BA/TS. Tune in a station with the rocker switch (either automatically / or manually << >>).
If desired, stations can also be stored manually in the Travelstore bank (see Storing stations).
Recalling stored stations
You can recall any stored station at the touch of a button. Select the waveband by pressing BA/TS. For FM, also choose the corresponding memory bank by pressing the BA/TS button as many times as necessary until the desired bank appears in the display. Press the corresponding preset button briefly to recall the station.
Dresden,Boston RCR128 gb 27 02.05.2002, 11:04 Uhr
The six strongest FM stations will be automatically stored on the memory bank T (Travelstore). When this process has been completed, the radio will play the strongest station.
You can automatically store the six most powerful FM stations in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. Press the BA/TS button for 2 seconds. T-STORE will appear in the display.
Scanning stations with Radio Scan
You can scan through all of the stations in your reception area. To start the Scan function: Press SRC/SC longer. The scanned frequency or the station name will start flashing in the display. During the actual scanning process SCAN will appear in the display.
PTY is an RDS service offered by an increasing number of broadcasting stations. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function.

PTY - Programme Type

Automatically storing the strongest stations with Travelstore
Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, confirmed by a beep). Now the station has been stored. The display will indicate which preset button is currently activated.
You can alter the automatic tuning sensitivity. If lo is displayed, the radio will only pick up strong, local stations (low sensitivity). If lo does not light up, the radio will also pick up weaker, more distant stations (high sensitivity). If you would like to alter the sensitivity level please refer to the section on DSC programming SENS.
Selecting the automatic tuning sensitivity
To select a scanned station and switch off the Scan function: Press SRC/SC. If no station is selected, scan will start again.

Programme types Turn PTY on. Use << >> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1-6. The following list indicates some of the programme types which are available. WEATHER FINANCE TRAVEL HOBBIES JAZZ COUNTRY NEWS INFO SPORT CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC CLASSICS
Switching PTY ON/OFF Press PTY. When the function is active, the programme type selected last will briefly appear in the display. PTY will appear permanently. Checking the programme type of the station Press PTY for approximately 2 seconds. After the beep tone the display will show the programme type offered by the tuned in station. If NONE appears in the display, the current station has no PTY code. Displaying the selected programme type Press << or >>. The programme type selected last will be displayed briefly. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. Press one of the presets 1-6. The selected programme type will be displayed for 2 seconds.
If you would like to listen to a station with this PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show NO PTY and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. You can assign different programme types to each preset position. Please refer to the next section on Storing programme types. b) Using the << >> buttons on the rocker switch When PTY is switched on, you can select a programme type using buttons << >>. Press << or >>; the programme type selected last will be displayed for 3 seconds. During this period press >> (forwards) or << (backwards) to select the desired type. Press << or >> as many times as required.
If you would like to listen to a station with the selected PTY,
Dresden,Boston RCR128 gb 28 02.05.2002, 11:04 Uhr
Storing programme types Each of the preset buttons 1-6 has been assigned one programme type at the factory. If desired, you can also replace these with other available programme types. To do so, make sure that PTY lights up in the display. If necessary, press the PTY button to switch on the function. Select a programme type using buttons << >> and
No station with PTY-POP can be found. The display shows NO PTY and automatically switches back to NDR3. NDR2 airs a PTY-POP programme. The radio will switch to the linked station NDR2 for the duration of the POP programme.
PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can be found currently in your reception range (with seek tuning or scan). The set will switch back to the station previously tuned into. As soon as it is possible to receive a programme in the broadcasting network with the PTY selected, the radio will switch over to the corresponding station for the duration of the programme.

Dresden,Boston RCR128 gb 29 02.05.2002, 11:04 Uhr
hold down the desired preset button (1-6) until you hear a beep. Now the selected programme type can be recalled by pressing this preset, if PTY lights up in the display.
During cassette operation, the set will also switch to the programme offering the selected PTY within the broadcasting network. After the PTY programme has ended the system will switch back to the previous mode (radio or cassette). Note: As already mentioned, these functions are only supported by a limited number of RDS stations at the present time.
press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show NO PTY and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated.
Scanning stations with PTY SCAN Requirement: PTY must appear in the display. Press the SRC/SC button until you hear a beep. All of the stations in your current reception area offering the selected programme type will be scanned. To switch off PTY-SCAN: Press SRC/SC or the seek-tuning rocker switch once again.
Example: German broadcasting network NDR: Station playing: NDR3. PTY lights up in the display. Programme type POP selected. Seek tuning is started.
Traffic programme station reception with RDS-EON
The abbreviation EON stands for Enhanced Other Networks, which means that information is exchanged within a radio network. Many FM radio stations provide their service area with traffic messages at regular intervals. Along with their programmes, all traffic programme stations transmit a special carrier signal, which is decoded by your car radio. If this signal is identified, TP will appear in the display (Traffic Programme). In addition to these, there are also stations which do not actually transmit traffic information themselves, but by using RDS-EON it is possible for them to forward the traffic messages broadcast by another traffic programme station in the same radio network. If you want to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR4), TA must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR4) afterwards.
Traffic announcement priority on/off
If the priority for traffic announcement programmes is activated, TA will light up in the display. To switch the priority on or off: Press the AFTA button. TA appears. If you press AFTA while a message is being broadcast, this message will be interrupted. The unit will then switch back to the previous mode. The priority for other traffic messages remains active. Please note that several buttons have no function while a traffic announcement is broadcast.

Switching the warning beep off a) Tune into another station offering traffic information: Press the rocker switch or press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: Press TA. TA will disappear from the display.

Warning beep

If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approximately 30 seconds. This alarm tone will also be emitted if you press a preset button for a station which does not send the traffic programme signal (TP).
Automatic seek tuning start (Cassette operation)
If you leave the reception area for the traffic programme station you have tuned into while you are listening to a cassette, the system will automatically start searching for a new traffic programme. If no such station is found within approximately 30 seconds, a warning beep will sound every 30 seconds. To switch the warning beep off, proceed as described above.
Dresden,Boston RCR128 gb 30 02.05.2002, 11:04 Uhr

Cassette eject

Press to eject the cassette.
Traffic information during cassette playback
The Traffic Announcement function (priority for traffic programmes) makes it possible to receive traffic information during cassette playback. If a traffic message is broadcast, cassette playback will stop and the message reproduced. This function is active, if TA lights up in the display. Press the AFTA button briefly to activate TA.

Fast winding

For tape direction TAPE 1, press button to fast rewind. To fast forward, press button. butFor tape direction TAPE 2, press ton to fast rewind. To fast forward, press button. When the end of the tape is reached with fast forward, the tape direction will change and the other side of the tape will be played. With Radio Monitor ON during fast winding you can listen to the radio programme previously selected. It is possible to change the Radio Monitor setting in the DSC mode. (Refer to DSC programming - RM).
Dresden,Boston RCR128 gb 31 02.05.2002, 11:04 Uhr
Although this volume was preset at the factory, you can use the DSC function to alter the setting (see DSC programming - TA VOL).
Press SRC/SC to select the tape deck mode. TAPE 1 or TAPE 2 will appear. The tape will be played in the direction previously selected.
Press / simultaneously. The display shows TAPE 1 or TAPE 2 for the selected tape side.
Adjusting the volume for traffic Reversing the tape Cassette playback announcements and the warning Insert the tape into the slot with the open To change the tape direction during cassette beep playback: side showing to the right.

Cassette deck operation

DSC programming
The car radio has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to them if desired. If you wish to alter any of the programming, press DSC. MENU / will light up in the display. Use the / buttons of the rocker switch to select the function you wish to change. The display will show you the setting you have selected. Press the << >> buttons of the rocker switch to change the values. Confirm the setting you have selected by pressing the DSC button. LOUDNESS Loudness boosts the bass frequencies at low volume. LOUD 1 - Low boost LOUD 6 - Max. boost TA VOL The traffic announcement and warning beep volume can be set between 0 to 63. The message will then come through at this volume, if the standard volume is lower. If the standard volume is set higher than the TA VOL level, then the traffic report will be played at the standard volume. Regional function on/off. To adjust the seek tuning sensitivity. LO stands for local reception. DX stands for distant reception. Select LO 3 if you want to receive strong stations in the local area, select DX 1 if you want to tune into weaker stations which are further away. RM OFF CLOCK 24 To switch between 12-h and 24-h clock display.
CLOCKSET To set the clock manually. Press << >> to select hours/ minutes. Press / to adjust the flashing value. ON VOL To set the turn-on volume. Press << >> to adjust the turn-on volume as desired. To change the mute volume. To change the volume of the acknowledgement tone (beep) between 0 and 9. (0 = off) Radio Monitor If the Radio Monitor function is active during fast winding of the tape, the set will switch to the radio and play the station previously received. DISPLAY ON/OFF Display indications on or off with the car radio turned off.

MUTE BEEP X

REG SENS DX1

/ << >>

Select function Adjust/recall value
Dresden,Boston RCR128 gb 32 02.05.2002, 11:04 Uhr
Overview of the DSC factory settings
LOUDNESS TA VOL REG SENS CLOCKTYPE CLOCKSET ON VOL MUTE BEEP RM DIS OFF DX1 CLOCK OFF OFF

Specifications

Amplifier Output power: 4 x 19 W RMS power acc. to DIN 45324 at 14.4 V 4 x 30 W max. power
Cassette Frequency response: 35 - Hz
Subject to modifications! 33
Dresden,Boston RCR128 gb 33 02.05.2002, 11:04 Uhr
FM frequency response: 35 - Hz
Tuner Wavebands: FM 87.MHz MW kHz LW kHz (Dresden RCR 128 without MW, LW).

Appendix

Bosch Gruppe

3/98 Mg K7/VKD 401 526

Dresden,Boston RCR128 d 19 02.05.2002, 11:13 Uhr

Blaupunkt-Werke GmbH